Update SeaBIOS
[qemu/mdroth.git] / vl.c
blob85bcc84df29f044c84b4a3e77e7a576567a96735
1 /*
2 * QEMU System Emulator
4 * Copyright (c) 2003-2008 Fabrice Bellard
6 * Permission is hereby granted, free of charge, to any person obtaining a copy
7 * of this software and associated documentation files (the "Software"), to deal
8 * in the Software without restriction, including without limitation the rights
9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10 * copies of the Software, and to permit persons to whom the Software is
11 * furnished to do so, subject to the following conditions:
13 * The above copyright notice and this permission notice shall be included in
14 * all copies or substantial portions of the Software.
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
22 * THE SOFTWARE.
24 #include <unistd.h>
25 #include <fcntl.h>
26 #include <signal.h>
27 #include <time.h>
28 #include <errno.h>
29 #include <sys/time.h>
30 #include <zlib.h>
32 /* Needed early for CONFIG_BSD etc. */
33 #include "config-host.h"
35 #ifndef _WIN32
36 #include <libgen.h>
37 #include <pwd.h>
38 #include <sys/times.h>
39 #include <sys/wait.h>
40 #include <termios.h>
41 #include <sys/mman.h>
42 #include <sys/ioctl.h>
43 #include <sys/resource.h>
44 #include <sys/socket.h>
45 #include <netinet/in.h>
46 #include <net/if.h>
47 #include <arpa/inet.h>
48 #include <dirent.h>
49 #include <netdb.h>
50 #include <sys/select.h>
51 #ifdef CONFIG_BSD
52 #include <sys/stat.h>
53 #if defined(__FreeBSD__) || defined(__FreeBSD_kernel__) || defined(__DragonFly__)
54 #include <libutil.h>
55 #include <sys/sysctl.h>
56 #else
57 #include <util.h>
58 #endif
59 #else
60 #ifdef __linux__
61 #include <pty.h>
62 #include <malloc.h>
63 #include <sys/prctl.h>
65 #include <linux/ppdev.h>
66 #include <linux/parport.h>
67 #endif
68 #ifdef __sun__
69 #include <sys/stat.h>
70 #include <sys/ethernet.h>
71 #include <sys/sockio.h>
72 #include <netinet/arp.h>
73 #include <netinet/in.h>
74 #include <netinet/in_systm.h>
75 #include <netinet/ip.h>
76 #include <netinet/ip_icmp.h> // must come after ip.h
77 #include <netinet/udp.h>
78 #include <netinet/tcp.h>
79 #include <net/if.h>
80 #include <syslog.h>
81 #include <stropts.h>
82 /* See MySQL bug #7156 (http://bugs.mysql.com/bug.php?id=7156) for
83 discussion about Solaris header problems */
84 extern int madvise(caddr_t, size_t, int);
85 #endif
86 #endif
87 #endif
89 #if defined(__OpenBSD__)
90 #include <util.h>
91 #endif
93 #if defined(CONFIG_VDE)
94 #include <libvdeplug.h>
95 #endif
97 #ifdef _WIN32
98 #include <windows.h>
99 #endif
101 #ifdef CONFIG_SDL
102 #if defined(__APPLE__) || defined(main)
103 #include <SDL.h>
104 int qemu_main(int argc, char **argv, char **envp);
105 int main(int argc, char **argv)
107 return qemu_main(argc, argv, NULL);
109 #undef main
110 #define main qemu_main
111 #endif
112 #endif /* CONFIG_SDL */
114 #ifdef CONFIG_COCOA
115 #undef main
116 #define main qemu_main
117 #endif /* CONFIG_COCOA */
119 #include "hw/hw.h"
120 #include "hw/boards.h"
121 #include "hw/usb.h"
122 #include "hw/pcmcia.h"
123 #include "hw/pc.h"
124 #include "hw/isa.h"
125 #include "hw/baum.h"
126 #include "hw/bt.h"
127 #include "hw/watchdog.h"
128 #include "hw/smbios.h"
129 #include "hw/xen.h"
130 #include "hw/qdev.h"
131 #include "hw/loader.h"
132 #include "bt-host.h"
133 #include "net.h"
134 #include "net/slirp.h"
135 #include "monitor.h"
136 #include "console.h"
137 #include "sysemu.h"
138 #include "gdbstub.h"
139 #include "qemu-timer.h"
140 #include "qemu-char.h"
141 #include "cache-utils.h"
142 #include "block.h"
143 #include "block_int.h"
144 #include "block-migration.h"
145 #include "dma.h"
146 #include "audio/audio.h"
147 #include "migration.h"
148 #include "kvm.h"
149 #include "qemu-option.h"
150 #include "qemu-config.h"
151 #include "qemu-objects.h"
152 #ifdef CONFIG_LINUX
153 #include "fsdev/qemu-fsdev.h"
154 #endif
156 #include "disas.h"
158 #include "qemu_socket.h"
160 #include "slirp/libslirp.h"
162 #include "qemu-queue.h"
163 #include "cpus.h"
164 #include "arch_init.h"
166 //#define DEBUG_NET
167 //#define DEBUG_SLIRP
169 #define DEFAULT_RAM_SIZE 128
171 #define MAX_VIRTIO_CONSOLES 1
173 static const char *data_dir;
174 const char *bios_name = NULL;
175 /* Note: drives_table[MAX_DRIVES] is a dummy block driver if none available
176 to store the VM snapshots */
177 struct drivelist drives = QTAILQ_HEAD_INITIALIZER(drives);
178 struct driveoptlist driveopts = QTAILQ_HEAD_INITIALIZER(driveopts);
179 enum vga_retrace_method vga_retrace_method = VGA_RETRACE_DUMB;
180 DisplayType display_type = DT_DEFAULT;
181 const char* keyboard_layout = NULL;
182 ram_addr_t ram_size;
183 const char *mem_path = NULL;
184 #ifdef MAP_POPULATE
185 int mem_prealloc = 0; /* force preallocation of physical target memory */
186 #endif
187 int nb_nics;
188 NICInfo nd_table[MAX_NICS];
189 int vm_running;
190 int autostart;
191 static int rtc_utc = 1;
192 static int rtc_date_offset = -1; /* -1 means no change */
193 QEMUClock *rtc_clock;
194 int vga_interface_type = VGA_NONE;
195 static int full_screen = 0;
196 #ifdef CONFIG_SDL
197 static int no_frame = 0;
198 #endif
199 int no_quit = 0;
200 CharDriverState *serial_hds[MAX_SERIAL_PORTS];
201 CharDriverState *parallel_hds[MAX_PARALLEL_PORTS];
202 CharDriverState *virtcon_hds[MAX_VIRTIO_CONSOLES];
203 int win2k_install_hack = 0;
204 int rtc_td_hack = 0;
205 int usb_enabled = 0;
206 int singlestep = 0;
207 int smp_cpus = 1;
208 int max_cpus = 0;
209 int smp_cores = 1;
210 int smp_threads = 1;
211 const char *vnc_display;
212 int acpi_enabled = 1;
213 int no_hpet = 0;
214 int fd_bootchk = 1;
215 int no_reboot = 0;
216 int no_shutdown = 0;
217 int cursor_hide = 1;
218 int graphic_rotate = 0;
219 uint8_t irq0override = 1;
220 #ifndef _WIN32
221 int daemonize = 0;
222 #endif
223 const char *watchdog;
224 const char *option_rom[MAX_OPTION_ROMS];
225 int nb_option_roms;
226 int semihosting_enabled = 0;
227 int old_param = 0;
228 const char *qemu_name;
229 int alt_grab = 0;
230 int ctrl_grab = 0;
231 unsigned int nb_prom_envs = 0;
232 const char *prom_envs[MAX_PROM_ENVS];
233 int boot_menu;
235 int nb_numa_nodes;
236 uint64_t node_mem[MAX_NODES];
237 uint64_t node_cpumask[MAX_NODES];
239 static QEMUTimer *nographic_timer;
241 uint8_t qemu_uuid[16];
243 static QEMUBootSetHandler *boot_set_handler;
244 static void *boot_set_opaque;
246 int kvm_allowed = 0;
247 uint32_t xen_domid;
248 enum xen_mode xen_mode = XEN_EMULATE;
250 static int default_serial = 1;
251 static int default_parallel = 1;
252 static int default_virtcon = 1;
253 static int default_monitor = 1;
254 static int default_vga = 1;
255 static int default_floppy = 1;
256 static int default_cdrom = 1;
257 static int default_sdcard = 1;
259 static struct {
260 const char *driver;
261 int *flag;
262 } default_list[] = {
263 { .driver = "isa-serial", .flag = &default_serial },
264 { .driver = "isa-parallel", .flag = &default_parallel },
265 { .driver = "isa-fdc", .flag = &default_floppy },
266 { .driver = "ide-drive", .flag = &default_cdrom },
267 { .driver = "virtio-serial-pci", .flag = &default_virtcon },
268 { .driver = "virtio-serial-s390", .flag = &default_virtcon },
269 { .driver = "virtio-serial", .flag = &default_virtcon },
270 { .driver = "VGA", .flag = &default_vga },
271 { .driver = "cirrus-vga", .flag = &default_vga },
272 { .driver = "vmware-svga", .flag = &default_vga },
275 static int default_driver_check(QemuOpts *opts, void *opaque)
277 const char *driver = qemu_opt_get(opts, "driver");
278 int i;
280 if (!driver)
281 return 0;
282 for (i = 0; i < ARRAY_SIZE(default_list); i++) {
283 if (strcmp(default_list[i].driver, driver) != 0)
284 continue;
285 *(default_list[i].flag) = 0;
287 return 0;
290 /***********************************************************/
292 static void set_proc_name(const char *s)
294 #if defined(__linux__) && defined(PR_SET_NAME)
295 char name[16];
296 if (!s)
297 return;
298 name[sizeof(name) - 1] = 0;
299 strncpy(name, s, sizeof(name));
300 /* Could rewrite argv[0] too, but that's a bit more complicated.
301 This simple way is enough for `top'. */
302 prctl(PR_SET_NAME, name);
303 #endif
306 /***********************************************************/
307 /* real time host monotonic timer */
309 /* compute with 96 bit intermediate result: (a*b)/c */
310 uint64_t muldiv64(uint64_t a, uint32_t b, uint32_t c)
312 union {
313 uint64_t ll;
314 struct {
315 #ifdef HOST_WORDS_BIGENDIAN
316 uint32_t high, low;
317 #else
318 uint32_t low, high;
319 #endif
320 } l;
321 } u, res;
322 uint64_t rl, rh;
324 u.ll = a;
325 rl = (uint64_t)u.l.low * (uint64_t)b;
326 rh = (uint64_t)u.l.high * (uint64_t)b;
327 rh += (rl >> 32);
328 res.l.high = rh / c;
329 res.l.low = (((rh % c) << 32) + (rl & 0xffffffff)) / c;
330 return res.ll;
333 /***********************************************************/
334 /* host time/date access */
335 void qemu_get_timedate(struct tm *tm, int offset)
337 time_t ti;
338 struct tm *ret;
340 time(&ti);
341 ti += offset;
342 if (rtc_date_offset == -1) {
343 if (rtc_utc)
344 ret = gmtime(&ti);
345 else
346 ret = localtime(&ti);
347 } else {
348 ti -= rtc_date_offset;
349 ret = gmtime(&ti);
352 memcpy(tm, ret, sizeof(struct tm));
355 int qemu_timedate_diff(struct tm *tm)
357 time_t seconds;
359 if (rtc_date_offset == -1)
360 if (rtc_utc)
361 seconds = mktimegm(tm);
362 else
363 seconds = mktime(tm);
364 else
365 seconds = mktimegm(tm) + rtc_date_offset;
367 return seconds - time(NULL);
370 void rtc_change_mon_event(struct tm *tm)
372 QObject *data;
374 data = qobject_from_jsonf("{ 'offset': %d }", qemu_timedate_diff(tm));
375 monitor_protocol_event(QEVENT_RTC_CHANGE, data);
376 qobject_decref(data);
379 static void configure_rtc_date_offset(const char *startdate, int legacy)
381 time_t rtc_start_date;
382 struct tm tm;
384 if (!strcmp(startdate, "now") && legacy) {
385 rtc_date_offset = -1;
386 } else {
387 if (sscanf(startdate, "%d-%d-%dT%d:%d:%d",
388 &tm.tm_year,
389 &tm.tm_mon,
390 &tm.tm_mday,
391 &tm.tm_hour,
392 &tm.tm_min,
393 &tm.tm_sec) == 6) {
394 /* OK */
395 } else if (sscanf(startdate, "%d-%d-%d",
396 &tm.tm_year,
397 &tm.tm_mon,
398 &tm.tm_mday) == 3) {
399 tm.tm_hour = 0;
400 tm.tm_min = 0;
401 tm.tm_sec = 0;
402 } else {
403 goto date_fail;
405 tm.tm_year -= 1900;
406 tm.tm_mon--;
407 rtc_start_date = mktimegm(&tm);
408 if (rtc_start_date == -1) {
409 date_fail:
410 fprintf(stderr, "Invalid date format. Valid formats are:\n"
411 "'2006-06-17T16:01:21' or '2006-06-17'\n");
412 exit(1);
414 rtc_date_offset = time(NULL) - rtc_start_date;
418 static void configure_rtc(QemuOpts *opts)
420 const char *value;
422 value = qemu_opt_get(opts, "base");
423 if (value) {
424 if (!strcmp(value, "utc")) {
425 rtc_utc = 1;
426 } else if (!strcmp(value, "localtime")) {
427 rtc_utc = 0;
428 } else {
429 configure_rtc_date_offset(value, 0);
432 value = qemu_opt_get(opts, "clock");
433 if (value) {
434 if (!strcmp(value, "host")) {
435 rtc_clock = host_clock;
436 } else if (!strcmp(value, "vm")) {
437 rtc_clock = vm_clock;
438 } else {
439 fprintf(stderr, "qemu: invalid option value '%s'\n", value);
440 exit(1);
443 value = qemu_opt_get(opts, "driftfix");
444 if (value) {
445 if (!strcmp(value, "slew")) {
446 rtc_td_hack = 1;
447 } else if (!strcmp(value, "none")) {
448 rtc_td_hack = 0;
449 } else {
450 fprintf(stderr, "qemu: invalid option value '%s'\n", value);
451 exit(1);
456 /***********************************************************/
457 /* Bluetooth support */
458 static int nb_hcis;
459 static int cur_hci;
460 static struct HCIInfo *hci_table[MAX_NICS];
462 static struct bt_vlan_s {
463 struct bt_scatternet_s net;
464 int id;
465 struct bt_vlan_s *next;
466 } *first_bt_vlan;
468 /* find or alloc a new bluetooth "VLAN" */
469 static struct bt_scatternet_s *qemu_find_bt_vlan(int id)
471 struct bt_vlan_s **pvlan, *vlan;
472 for (vlan = first_bt_vlan; vlan != NULL; vlan = vlan->next) {
473 if (vlan->id == id)
474 return &vlan->net;
476 vlan = qemu_mallocz(sizeof(struct bt_vlan_s));
477 vlan->id = id;
478 pvlan = &first_bt_vlan;
479 while (*pvlan != NULL)
480 pvlan = &(*pvlan)->next;
481 *pvlan = vlan;
482 return &vlan->net;
485 static void null_hci_send(struct HCIInfo *hci, const uint8_t *data, int len)
489 static int null_hci_addr_set(struct HCIInfo *hci, const uint8_t *bd_addr)
491 return -ENOTSUP;
494 static struct HCIInfo null_hci = {
495 .cmd_send = null_hci_send,
496 .sco_send = null_hci_send,
497 .acl_send = null_hci_send,
498 .bdaddr_set = null_hci_addr_set,
501 struct HCIInfo *qemu_next_hci(void)
503 if (cur_hci == nb_hcis)
504 return &null_hci;
506 return hci_table[cur_hci++];
509 static struct HCIInfo *hci_init(const char *str)
511 char *endp;
512 struct bt_scatternet_s *vlan = 0;
514 if (!strcmp(str, "null"))
515 /* null */
516 return &null_hci;
517 else if (!strncmp(str, "host", 4) && (str[4] == '\0' || str[4] == ':'))
518 /* host[:hciN] */
519 return bt_host_hci(str[4] ? str + 5 : "hci0");
520 else if (!strncmp(str, "hci", 3)) {
521 /* hci[,vlan=n] */
522 if (str[3]) {
523 if (!strncmp(str + 3, ",vlan=", 6)) {
524 vlan = qemu_find_bt_vlan(strtol(str + 9, &endp, 0));
525 if (*endp)
526 vlan = 0;
528 } else
529 vlan = qemu_find_bt_vlan(0);
530 if (vlan)
531 return bt_new_hci(vlan);
534 fprintf(stderr, "qemu: Unknown bluetooth HCI `%s'.\n", str);
536 return 0;
539 static int bt_hci_parse(const char *str)
541 struct HCIInfo *hci;
542 bdaddr_t bdaddr;
544 if (nb_hcis >= MAX_NICS) {
545 fprintf(stderr, "qemu: Too many bluetooth HCIs (max %i).\n", MAX_NICS);
546 return -1;
549 hci = hci_init(str);
550 if (!hci)
551 return -1;
553 bdaddr.b[0] = 0x52;
554 bdaddr.b[1] = 0x54;
555 bdaddr.b[2] = 0x00;
556 bdaddr.b[3] = 0x12;
557 bdaddr.b[4] = 0x34;
558 bdaddr.b[5] = 0x56 + nb_hcis;
559 hci->bdaddr_set(hci, bdaddr.b);
561 hci_table[nb_hcis++] = hci;
563 return 0;
566 static void bt_vhci_add(int vlan_id)
568 struct bt_scatternet_s *vlan = qemu_find_bt_vlan(vlan_id);
570 if (!vlan->slave)
571 fprintf(stderr, "qemu: warning: adding a VHCI to "
572 "an empty scatternet %i\n", vlan_id);
574 bt_vhci_init(bt_new_hci(vlan));
577 static struct bt_device_s *bt_device_add(const char *opt)
579 struct bt_scatternet_s *vlan;
580 int vlan_id = 0;
581 char *endp = strstr(opt, ",vlan=");
582 int len = (endp ? endp - opt : strlen(opt)) + 1;
583 char devname[10];
585 pstrcpy(devname, MIN(sizeof(devname), len), opt);
587 if (endp) {
588 vlan_id = strtol(endp + 6, &endp, 0);
589 if (*endp) {
590 fprintf(stderr, "qemu: unrecognised bluetooth vlan Id\n");
591 return 0;
595 vlan = qemu_find_bt_vlan(vlan_id);
597 if (!vlan->slave)
598 fprintf(stderr, "qemu: warning: adding a slave device to "
599 "an empty scatternet %i\n", vlan_id);
601 if (!strcmp(devname, "keyboard"))
602 return bt_keyboard_init(vlan);
604 fprintf(stderr, "qemu: unsupported bluetooth device `%s'\n", devname);
605 return 0;
608 static int bt_parse(const char *opt)
610 const char *endp, *p;
611 int vlan;
613 if (strstart(opt, "hci", &endp)) {
614 if (!*endp || *endp == ',') {
615 if (*endp)
616 if (!strstart(endp, ",vlan=", 0))
617 opt = endp + 1;
619 return bt_hci_parse(opt);
621 } else if (strstart(opt, "vhci", &endp)) {
622 if (!*endp || *endp == ',') {
623 if (*endp) {
624 if (strstart(endp, ",vlan=", &p)) {
625 vlan = strtol(p, (char **) &endp, 0);
626 if (*endp) {
627 fprintf(stderr, "qemu: bad scatternet '%s'\n", p);
628 return 1;
630 } else {
631 fprintf(stderr, "qemu: bad parameter '%s'\n", endp + 1);
632 return 1;
634 } else
635 vlan = 0;
637 bt_vhci_add(vlan);
638 return 0;
640 } else if (strstart(opt, "device:", &endp))
641 return !bt_device_add(endp);
643 fprintf(stderr, "qemu: bad bluetooth parameter '%s'\n", opt);
644 return 1;
647 /***********************************************************/
648 /* QEMU Block devices */
650 #define HD_ALIAS "index=%d,media=disk"
651 #define CDROM_ALIAS "index=2,media=cdrom"
652 #define FD_ALIAS "index=%d,if=floppy"
653 #define PFLASH_ALIAS "if=pflash"
654 #define MTD_ALIAS "if=mtd"
655 #define SD_ALIAS "index=0,if=sd"
657 QemuOpts *drive_add(const char *file, const char *fmt, ...)
659 va_list ap;
660 char optstr[1024];
661 QemuOpts *opts;
663 va_start(ap, fmt);
664 vsnprintf(optstr, sizeof(optstr), fmt, ap);
665 va_end(ap);
667 opts = qemu_opts_parse(&qemu_drive_opts, optstr, 0);
668 if (!opts) {
669 return NULL;
671 if (file)
672 qemu_opt_set(opts, "file", file);
673 return opts;
676 DriveInfo *drive_get(BlockInterfaceType type, int bus, int unit)
678 DriveInfo *dinfo;
680 /* seek interface, bus and unit */
682 QTAILQ_FOREACH(dinfo, &drives, next) {
683 if (dinfo->type == type &&
684 dinfo->bus == bus &&
685 dinfo->unit == unit)
686 return dinfo;
689 return NULL;
692 DriveInfo *drive_get_by_id(const char *id)
694 DriveInfo *dinfo;
696 QTAILQ_FOREACH(dinfo, &drives, next) {
697 if (strcmp(id, dinfo->id))
698 continue;
699 return dinfo;
701 return NULL;
704 int drive_get_max_bus(BlockInterfaceType type)
706 int max_bus;
707 DriveInfo *dinfo;
709 max_bus = -1;
710 QTAILQ_FOREACH(dinfo, &drives, next) {
711 if(dinfo->type == type &&
712 dinfo->bus > max_bus)
713 max_bus = dinfo->bus;
715 return max_bus;
718 const char *drive_get_serial(BlockDriverState *bdrv)
720 DriveInfo *dinfo;
722 QTAILQ_FOREACH(dinfo, &drives, next) {
723 if (dinfo->bdrv == bdrv)
724 return dinfo->serial;
727 return "\0";
730 BlockInterfaceErrorAction drive_get_on_error(
731 BlockDriverState *bdrv, int is_read)
733 DriveInfo *dinfo;
735 QTAILQ_FOREACH(dinfo, &drives, next) {
736 if (dinfo->bdrv == bdrv)
737 return is_read ? dinfo->on_read_error : dinfo->on_write_error;
740 return is_read ? BLOCK_ERR_REPORT : BLOCK_ERR_STOP_ENOSPC;
743 static void bdrv_format_print(void *opaque, const char *name)
745 fprintf(stderr, " %s", name);
748 void drive_uninit(DriveInfo *dinfo)
750 qemu_opts_del(dinfo->opts);
751 bdrv_delete(dinfo->bdrv);
752 QTAILQ_REMOVE(&drives, dinfo, next);
753 qemu_free(dinfo);
756 static int parse_block_error_action(const char *buf, int is_read)
758 if (!strcmp(buf, "ignore")) {
759 return BLOCK_ERR_IGNORE;
760 } else if (!is_read && !strcmp(buf, "enospc")) {
761 return BLOCK_ERR_STOP_ENOSPC;
762 } else if (!strcmp(buf, "stop")) {
763 return BLOCK_ERR_STOP_ANY;
764 } else if (!strcmp(buf, "report")) {
765 return BLOCK_ERR_REPORT;
766 } else {
767 fprintf(stderr, "qemu: '%s' invalid %s error action\n",
768 buf, is_read ? "read" : "write");
769 return -1;
773 DriveInfo *drive_init(QemuOpts *opts, void *opaque,
774 int *fatal_error)
776 const char *buf;
777 const char *file = NULL;
778 char devname[128];
779 const char *serial;
780 const char *mediastr = "";
781 BlockInterfaceType type;
782 enum { MEDIA_DISK, MEDIA_CDROM } media;
783 int bus_id, unit_id;
784 int cyls, heads, secs, translation;
785 BlockDriver *drv = NULL;
786 QEMUMachine *machine = opaque;
787 int max_devs;
788 int index;
789 int ro = 0;
790 int bdrv_flags = 0;
791 int on_read_error, on_write_error;
792 const char *devaddr;
793 DriveInfo *dinfo;
794 int snapshot = 0;
796 *fatal_error = 1;
798 translation = BIOS_ATA_TRANSLATION_AUTO;
800 if (machine && machine->use_scsi) {
801 type = IF_SCSI;
802 max_devs = MAX_SCSI_DEVS;
803 pstrcpy(devname, sizeof(devname), "scsi");
804 } else {
805 type = IF_IDE;
806 max_devs = MAX_IDE_DEVS;
807 pstrcpy(devname, sizeof(devname), "ide");
809 media = MEDIA_DISK;
811 /* extract parameters */
812 bus_id = qemu_opt_get_number(opts, "bus", 0);
813 unit_id = qemu_opt_get_number(opts, "unit", -1);
814 index = qemu_opt_get_number(opts, "index", -1);
816 cyls = qemu_opt_get_number(opts, "cyls", 0);
817 heads = qemu_opt_get_number(opts, "heads", 0);
818 secs = qemu_opt_get_number(opts, "secs", 0);
820 snapshot = qemu_opt_get_bool(opts, "snapshot", 0);
821 ro = qemu_opt_get_bool(opts, "readonly", 0);
823 file = qemu_opt_get(opts, "file");
824 serial = qemu_opt_get(opts, "serial");
826 if ((buf = qemu_opt_get(opts, "if")) != NULL) {
827 pstrcpy(devname, sizeof(devname), buf);
828 if (!strcmp(buf, "ide")) {
829 type = IF_IDE;
830 max_devs = MAX_IDE_DEVS;
831 } else if (!strcmp(buf, "scsi")) {
832 type = IF_SCSI;
833 max_devs = MAX_SCSI_DEVS;
834 } else if (!strcmp(buf, "floppy")) {
835 type = IF_FLOPPY;
836 max_devs = 0;
837 } else if (!strcmp(buf, "pflash")) {
838 type = IF_PFLASH;
839 max_devs = 0;
840 } else if (!strcmp(buf, "mtd")) {
841 type = IF_MTD;
842 max_devs = 0;
843 } else if (!strcmp(buf, "sd")) {
844 type = IF_SD;
845 max_devs = 0;
846 } else if (!strcmp(buf, "virtio")) {
847 type = IF_VIRTIO;
848 max_devs = 0;
849 } else if (!strcmp(buf, "xen")) {
850 type = IF_XEN;
851 max_devs = 0;
852 } else if (!strcmp(buf, "none")) {
853 type = IF_NONE;
854 max_devs = 0;
855 } else {
856 fprintf(stderr, "qemu: unsupported bus type '%s'\n", buf);
857 return NULL;
861 if (cyls || heads || secs) {
862 if (cyls < 1 || (type == IF_IDE && cyls > 16383)) {
863 fprintf(stderr, "qemu: '%s' invalid physical cyls number\n", buf);
864 return NULL;
866 if (heads < 1 || (type == IF_IDE && heads > 16)) {
867 fprintf(stderr, "qemu: '%s' invalid physical heads number\n", buf);
868 return NULL;
870 if (secs < 1 || (type == IF_IDE && secs > 63)) {
871 fprintf(stderr, "qemu: '%s' invalid physical secs number\n", buf);
872 return NULL;
876 if ((buf = qemu_opt_get(opts, "trans")) != NULL) {
877 if (!cyls) {
878 fprintf(stderr,
879 "qemu: '%s' trans must be used with cyls,heads and secs\n",
880 buf);
881 return NULL;
883 if (!strcmp(buf, "none"))
884 translation = BIOS_ATA_TRANSLATION_NONE;
885 else if (!strcmp(buf, "lba"))
886 translation = BIOS_ATA_TRANSLATION_LBA;
887 else if (!strcmp(buf, "auto"))
888 translation = BIOS_ATA_TRANSLATION_AUTO;
889 else {
890 fprintf(stderr, "qemu: '%s' invalid translation type\n", buf);
891 return NULL;
895 if ((buf = qemu_opt_get(opts, "media")) != NULL) {
896 if (!strcmp(buf, "disk")) {
897 media = MEDIA_DISK;
898 } else if (!strcmp(buf, "cdrom")) {
899 if (cyls || secs || heads) {
900 fprintf(stderr,
901 "qemu: '%s' invalid physical CHS format\n", buf);
902 return NULL;
904 media = MEDIA_CDROM;
905 } else {
906 fprintf(stderr, "qemu: '%s' invalid media\n", buf);
907 return NULL;
911 if ((buf = qemu_opt_get(opts, "cache")) != NULL) {
912 if (!strcmp(buf, "off") || !strcmp(buf, "none")) {
913 bdrv_flags |= BDRV_O_NOCACHE;
914 } else if (!strcmp(buf, "writeback")) {
915 bdrv_flags |= BDRV_O_CACHE_WB;
916 } else if (!strcmp(buf, "writethrough")) {
917 /* this is the default */
918 } else {
919 fprintf(stderr, "qemu: invalid cache option\n");
920 return NULL;
924 #ifdef CONFIG_LINUX_AIO
925 if ((buf = qemu_opt_get(opts, "aio")) != NULL) {
926 if (!strcmp(buf, "native")) {
927 bdrv_flags |= BDRV_O_NATIVE_AIO;
928 } else if (!strcmp(buf, "threads")) {
929 /* this is the default */
930 } else {
931 fprintf(stderr, "qemu: invalid aio option\n");
932 return NULL;
935 #endif
937 if ((buf = qemu_opt_get(opts, "format")) != NULL) {
938 if (strcmp(buf, "?") == 0) {
939 fprintf(stderr, "qemu: Supported formats:");
940 bdrv_iterate_format(bdrv_format_print, NULL);
941 fprintf(stderr, "\n");
942 return NULL;
944 drv = bdrv_find_whitelisted_format(buf);
945 if (!drv) {
946 fprintf(stderr, "qemu: '%s' invalid format\n", buf);
947 return NULL;
951 on_write_error = BLOCK_ERR_STOP_ENOSPC;
952 if ((buf = qemu_opt_get(opts, "werror")) != NULL) {
953 if (type != IF_IDE && type != IF_SCSI && type != IF_VIRTIO) {
954 fprintf(stderr, "werror is no supported by this format\n");
955 return NULL;
958 on_write_error = parse_block_error_action(buf, 0);
959 if (on_write_error < 0) {
960 return NULL;
964 on_read_error = BLOCK_ERR_REPORT;
965 if ((buf = qemu_opt_get(opts, "rerror")) != NULL) {
966 if (type != IF_IDE && type != IF_VIRTIO) {
967 fprintf(stderr, "rerror is no supported by this format\n");
968 return NULL;
971 on_read_error = parse_block_error_action(buf, 1);
972 if (on_read_error < 0) {
973 return NULL;
977 if ((devaddr = qemu_opt_get(opts, "addr")) != NULL) {
978 if (type != IF_VIRTIO) {
979 fprintf(stderr, "addr is not supported\n");
980 return NULL;
984 /* compute bus and unit according index */
986 if (index != -1) {
987 if (bus_id != 0 || unit_id != -1) {
988 fprintf(stderr,
989 "qemu: index cannot be used with bus and unit\n");
990 return NULL;
992 if (max_devs == 0)
994 unit_id = index;
995 bus_id = 0;
996 } else {
997 unit_id = index % max_devs;
998 bus_id = index / max_devs;
1002 /* if user doesn't specify a unit_id,
1003 * try to find the first free
1006 if (unit_id == -1) {
1007 unit_id = 0;
1008 while (drive_get(type, bus_id, unit_id) != NULL) {
1009 unit_id++;
1010 if (max_devs && unit_id >= max_devs) {
1011 unit_id -= max_devs;
1012 bus_id++;
1017 /* check unit id */
1019 if (max_devs && unit_id >= max_devs) {
1020 fprintf(stderr, "qemu: unit %d too big (max is %d)\n",
1021 unit_id, max_devs - 1);
1022 return NULL;
1026 * ignore multiple definitions
1029 if (drive_get(type, bus_id, unit_id) != NULL) {
1030 *fatal_error = 0;
1031 return NULL;
1034 /* init */
1036 dinfo = qemu_mallocz(sizeof(*dinfo));
1037 if ((buf = qemu_opts_id(opts)) != NULL) {
1038 dinfo->id = qemu_strdup(buf);
1039 } else {
1040 /* no id supplied -> create one */
1041 dinfo->id = qemu_mallocz(32);
1042 if (type == IF_IDE || type == IF_SCSI)
1043 mediastr = (media == MEDIA_CDROM) ? "-cd" : "-hd";
1044 if (max_devs)
1045 snprintf(dinfo->id, 32, "%s%i%s%i",
1046 devname, bus_id, mediastr, unit_id);
1047 else
1048 snprintf(dinfo->id, 32, "%s%s%i",
1049 devname, mediastr, unit_id);
1051 dinfo->bdrv = bdrv_new(dinfo->id);
1052 dinfo->devaddr = devaddr;
1053 dinfo->type = type;
1054 dinfo->bus = bus_id;
1055 dinfo->unit = unit_id;
1056 dinfo->on_read_error = on_read_error;
1057 dinfo->on_write_error = on_write_error;
1058 dinfo->opts = opts;
1059 if (serial)
1060 strncpy(dinfo->serial, serial, sizeof(serial));
1061 QTAILQ_INSERT_TAIL(&drives, dinfo, next);
1063 switch(type) {
1064 case IF_IDE:
1065 case IF_SCSI:
1066 case IF_XEN:
1067 case IF_NONE:
1068 switch(media) {
1069 case MEDIA_DISK:
1070 if (cyls != 0) {
1071 bdrv_set_geometry_hint(dinfo->bdrv, cyls, heads, secs);
1072 bdrv_set_translation_hint(dinfo->bdrv, translation);
1074 break;
1075 case MEDIA_CDROM:
1076 bdrv_set_type_hint(dinfo->bdrv, BDRV_TYPE_CDROM);
1077 break;
1079 break;
1080 case IF_SD:
1081 /* FIXME: This isn't really a floppy, but it's a reasonable
1082 approximation. */
1083 case IF_FLOPPY:
1084 bdrv_set_type_hint(dinfo->bdrv, BDRV_TYPE_FLOPPY);
1085 break;
1086 case IF_PFLASH:
1087 case IF_MTD:
1088 break;
1089 case IF_VIRTIO:
1090 /* add virtio block device */
1091 opts = qemu_opts_create(&qemu_device_opts, NULL, 0);
1092 qemu_opt_set(opts, "driver", "virtio-blk-pci");
1093 qemu_opt_set(opts, "drive", dinfo->id);
1094 if (devaddr)
1095 qemu_opt_set(opts, "addr", devaddr);
1096 break;
1097 case IF_COUNT:
1098 abort();
1100 if (!file) {
1101 *fatal_error = 0;
1102 return NULL;
1104 if (snapshot) {
1105 /* always use write-back with snapshot */
1106 bdrv_flags &= ~BDRV_O_CACHE_MASK;
1107 bdrv_flags |= (BDRV_O_SNAPSHOT|BDRV_O_CACHE_WB);
1110 if (media == MEDIA_CDROM) {
1111 /* CDROM is fine for any interface, don't check. */
1112 ro = 1;
1113 } else if (ro == 1) {
1114 if (type != IF_SCSI && type != IF_VIRTIO && type != IF_FLOPPY) {
1115 fprintf(stderr, "qemu: readonly flag not supported for drive with this interface\n");
1116 return NULL;
1120 bdrv_flags |= ro ? 0 : BDRV_O_RDWR;
1122 if (bdrv_open(dinfo->bdrv, file, bdrv_flags, drv) < 0) {
1123 fprintf(stderr, "qemu: could not open disk image %s: %s\n",
1124 file, strerror(errno));
1125 return NULL;
1128 if (bdrv_key_required(dinfo->bdrv))
1129 autostart = 0;
1130 *fatal_error = 0;
1131 return dinfo;
1134 static int drive_init_func(QemuOpts *opts, void *opaque)
1136 QEMUMachine *machine = opaque;
1137 int fatal_error = 0;
1139 if (drive_init(opts, machine, &fatal_error) == NULL) {
1140 if (fatal_error)
1141 return 1;
1143 return 0;
1146 static int drive_enable_snapshot(QemuOpts *opts, void *opaque)
1148 if (NULL == qemu_opt_get(opts, "snapshot")) {
1149 qemu_opt_set(opts, "snapshot", "on");
1151 return 0;
1154 void qemu_register_boot_set(QEMUBootSetHandler *func, void *opaque)
1156 boot_set_handler = func;
1157 boot_set_opaque = opaque;
1160 int qemu_boot_set(const char *boot_devices)
1162 if (!boot_set_handler) {
1163 return -EINVAL;
1165 return boot_set_handler(boot_set_opaque, boot_devices);
1168 static void validate_bootdevices(char *devices)
1170 /* We just do some generic consistency checks */
1171 const char *p;
1172 int bitmap = 0;
1174 for (p = devices; *p != '\0'; p++) {
1175 /* Allowed boot devices are:
1176 * a-b: floppy disk drives
1177 * c-f: IDE disk drives
1178 * g-m: machine implementation dependant drives
1179 * n-p: network devices
1180 * It's up to each machine implementation to check if the given boot
1181 * devices match the actual hardware implementation and firmware
1182 * features.
1184 if (*p < 'a' || *p > 'p') {
1185 fprintf(stderr, "Invalid boot device '%c'\n", *p);
1186 exit(1);
1188 if (bitmap & (1 << (*p - 'a'))) {
1189 fprintf(stderr, "Boot device '%c' was given twice\n", *p);
1190 exit(1);
1192 bitmap |= 1 << (*p - 'a');
1196 static void restore_boot_devices(void *opaque)
1198 char *standard_boot_devices = opaque;
1199 static int first = 1;
1201 /* Restore boot order and remove ourselves after the first boot */
1202 if (first) {
1203 first = 0;
1204 return;
1207 qemu_boot_set(standard_boot_devices);
1209 qemu_unregister_reset(restore_boot_devices, standard_boot_devices);
1210 qemu_free(standard_boot_devices);
1213 static void numa_add(const char *optarg)
1215 char option[128];
1216 char *endptr;
1217 unsigned long long value, endvalue;
1218 int nodenr;
1220 optarg = get_opt_name(option, 128, optarg, ',') + 1;
1221 if (!strcmp(option, "node")) {
1222 if (get_param_value(option, 128, "nodeid", optarg) == 0) {
1223 nodenr = nb_numa_nodes;
1224 } else {
1225 nodenr = strtoull(option, NULL, 10);
1228 if (get_param_value(option, 128, "mem", optarg) == 0) {
1229 node_mem[nodenr] = 0;
1230 } else {
1231 value = strtoull(option, &endptr, 0);
1232 switch (*endptr) {
1233 case 0: case 'M': case 'm':
1234 value <<= 20;
1235 break;
1236 case 'G': case 'g':
1237 value <<= 30;
1238 break;
1240 node_mem[nodenr] = value;
1242 if (get_param_value(option, 128, "cpus", optarg) == 0) {
1243 node_cpumask[nodenr] = 0;
1244 } else {
1245 value = strtoull(option, &endptr, 10);
1246 if (value >= 64) {
1247 value = 63;
1248 fprintf(stderr, "only 64 CPUs in NUMA mode supported.\n");
1249 } else {
1250 if (*endptr == '-') {
1251 endvalue = strtoull(endptr+1, &endptr, 10);
1252 if (endvalue >= 63) {
1253 endvalue = 62;
1254 fprintf(stderr,
1255 "only 63 CPUs in NUMA mode supported.\n");
1257 value = (2ULL << endvalue) - (1ULL << value);
1258 } else {
1259 value = 1ULL << value;
1262 node_cpumask[nodenr] = value;
1264 nb_numa_nodes++;
1266 return;
1269 static void smp_parse(const char *optarg)
1271 int smp, sockets = 0, threads = 0, cores = 0;
1272 char *endptr;
1273 char option[128];
1275 smp = strtoul(optarg, &endptr, 10);
1276 if (endptr != optarg) {
1277 if (*endptr == ',') {
1278 endptr++;
1281 if (get_param_value(option, 128, "sockets", endptr) != 0)
1282 sockets = strtoull(option, NULL, 10);
1283 if (get_param_value(option, 128, "cores", endptr) != 0)
1284 cores = strtoull(option, NULL, 10);
1285 if (get_param_value(option, 128, "threads", endptr) != 0)
1286 threads = strtoull(option, NULL, 10);
1287 if (get_param_value(option, 128, "maxcpus", endptr) != 0)
1288 max_cpus = strtoull(option, NULL, 10);
1290 /* compute missing values, prefer sockets over cores over threads */
1291 if (smp == 0 || sockets == 0) {
1292 sockets = sockets > 0 ? sockets : 1;
1293 cores = cores > 0 ? cores : 1;
1294 threads = threads > 0 ? threads : 1;
1295 if (smp == 0) {
1296 smp = cores * threads * sockets;
1298 } else {
1299 if (cores == 0) {
1300 threads = threads > 0 ? threads : 1;
1301 cores = smp / (sockets * threads);
1302 } else {
1303 if (sockets) {
1304 threads = smp / (cores * sockets);
1308 smp_cpus = smp;
1309 smp_cores = cores > 0 ? cores : 1;
1310 smp_threads = threads > 0 ? threads : 1;
1311 if (max_cpus == 0)
1312 max_cpus = smp_cpus;
1315 /***********************************************************/
1316 /* USB devices */
1318 static int usb_device_add(const char *devname, int is_hotplug)
1320 const char *p;
1321 USBDevice *dev = NULL;
1323 if (!usb_enabled)
1324 return -1;
1326 /* drivers with .usbdevice_name entry in USBDeviceInfo */
1327 dev = usbdevice_create(devname);
1328 if (dev)
1329 goto done;
1331 /* the other ones */
1332 if (strstart(devname, "host:", &p)) {
1333 dev = usb_host_device_open(p);
1334 } else if (!strcmp(devname, "bt") || strstart(devname, "bt:", &p)) {
1335 dev = usb_bt_init(devname[2] ? hci_init(p) :
1336 bt_new_hci(qemu_find_bt_vlan(0)));
1337 } else {
1338 return -1;
1340 if (!dev)
1341 return -1;
1343 done:
1344 return 0;
1347 static int usb_device_del(const char *devname)
1349 int bus_num, addr;
1350 const char *p;
1352 if (strstart(devname, "host:", &p))
1353 return usb_host_device_close(p);
1355 if (!usb_enabled)
1356 return -1;
1358 p = strchr(devname, '.');
1359 if (!p)
1360 return -1;
1361 bus_num = strtoul(devname, NULL, 0);
1362 addr = strtoul(p + 1, NULL, 0);
1364 return usb_device_delete_addr(bus_num, addr);
1367 static int usb_parse(const char *cmdline)
1369 int r;
1370 r = usb_device_add(cmdline, 0);
1371 if (r < 0) {
1372 fprintf(stderr, "qemu: could not add USB device '%s'\n", cmdline);
1374 return r;
1377 void do_usb_add(Monitor *mon, const QDict *qdict)
1379 const char *devname = qdict_get_str(qdict, "devname");
1380 if (usb_device_add(devname, 1) < 0) {
1381 error_report("could not add USB device '%s'", devname);
1385 void do_usb_del(Monitor *mon, const QDict *qdict)
1387 const char *devname = qdict_get_str(qdict, "devname");
1388 if (usb_device_del(devname) < 0) {
1389 error_report("could not delete USB device '%s'", devname);
1393 /***********************************************************/
1394 /* PCMCIA/Cardbus */
1396 static struct pcmcia_socket_entry_s {
1397 PCMCIASocket *socket;
1398 struct pcmcia_socket_entry_s *next;
1399 } *pcmcia_sockets = 0;
1401 void pcmcia_socket_register(PCMCIASocket *socket)
1403 struct pcmcia_socket_entry_s *entry;
1405 entry = qemu_malloc(sizeof(struct pcmcia_socket_entry_s));
1406 entry->socket = socket;
1407 entry->next = pcmcia_sockets;
1408 pcmcia_sockets = entry;
1411 void pcmcia_socket_unregister(PCMCIASocket *socket)
1413 struct pcmcia_socket_entry_s *entry, **ptr;
1415 ptr = &pcmcia_sockets;
1416 for (entry = *ptr; entry; ptr = &entry->next, entry = *ptr)
1417 if (entry->socket == socket) {
1418 *ptr = entry->next;
1419 qemu_free(entry);
1423 void pcmcia_info(Monitor *mon)
1425 struct pcmcia_socket_entry_s *iter;
1427 if (!pcmcia_sockets)
1428 monitor_printf(mon, "No PCMCIA sockets\n");
1430 for (iter = pcmcia_sockets; iter; iter = iter->next)
1431 monitor_printf(mon, "%s: %s\n", iter->socket->slot_string,
1432 iter->socket->attached ? iter->socket->card_string :
1433 "Empty");
1436 /***********************************************************/
1437 /* I/O handling */
1439 typedef struct IOHandlerRecord {
1440 int fd;
1441 IOCanReadHandler *fd_read_poll;
1442 IOHandler *fd_read;
1443 IOHandler *fd_write;
1444 int deleted;
1445 void *opaque;
1446 /* temporary data */
1447 struct pollfd *ufd;
1448 QLIST_ENTRY(IOHandlerRecord) next;
1449 } IOHandlerRecord;
1451 static QLIST_HEAD(, IOHandlerRecord) io_handlers =
1452 QLIST_HEAD_INITIALIZER(io_handlers);
1455 /* XXX: fd_read_poll should be suppressed, but an API change is
1456 necessary in the character devices to suppress fd_can_read(). */
1457 int qemu_set_fd_handler2(int fd,
1458 IOCanReadHandler *fd_read_poll,
1459 IOHandler *fd_read,
1460 IOHandler *fd_write,
1461 void *opaque)
1463 IOHandlerRecord *ioh;
1465 if (!fd_read && !fd_write) {
1466 QLIST_FOREACH(ioh, &io_handlers, next) {
1467 if (ioh->fd == fd) {
1468 ioh->deleted = 1;
1469 break;
1472 } else {
1473 QLIST_FOREACH(ioh, &io_handlers, next) {
1474 if (ioh->fd == fd)
1475 goto found;
1477 ioh = qemu_mallocz(sizeof(IOHandlerRecord));
1478 QLIST_INSERT_HEAD(&io_handlers, ioh, next);
1479 found:
1480 ioh->fd = fd;
1481 ioh->fd_read_poll = fd_read_poll;
1482 ioh->fd_read = fd_read;
1483 ioh->fd_write = fd_write;
1484 ioh->opaque = opaque;
1485 ioh->deleted = 0;
1487 return 0;
1490 int qemu_set_fd_handler(int fd,
1491 IOHandler *fd_read,
1492 IOHandler *fd_write,
1493 void *opaque)
1495 return qemu_set_fd_handler2(fd, NULL, fd_read, fd_write, opaque);
1498 #ifdef _WIN32
1499 /***********************************************************/
1500 /* Polling handling */
1502 typedef struct PollingEntry {
1503 PollingFunc *func;
1504 void *opaque;
1505 struct PollingEntry *next;
1506 } PollingEntry;
1508 static PollingEntry *first_polling_entry;
1510 int qemu_add_polling_cb(PollingFunc *func, void *opaque)
1512 PollingEntry **ppe, *pe;
1513 pe = qemu_mallocz(sizeof(PollingEntry));
1514 pe->func = func;
1515 pe->opaque = opaque;
1516 for(ppe = &first_polling_entry; *ppe != NULL; ppe = &(*ppe)->next);
1517 *ppe = pe;
1518 return 0;
1521 void qemu_del_polling_cb(PollingFunc *func, void *opaque)
1523 PollingEntry **ppe, *pe;
1524 for(ppe = &first_polling_entry; *ppe != NULL; ppe = &(*ppe)->next) {
1525 pe = *ppe;
1526 if (pe->func == func && pe->opaque == opaque) {
1527 *ppe = pe->next;
1528 qemu_free(pe);
1529 break;
1534 /***********************************************************/
1535 /* Wait objects support */
1536 typedef struct WaitObjects {
1537 int num;
1538 HANDLE events[MAXIMUM_WAIT_OBJECTS + 1];
1539 WaitObjectFunc *func[MAXIMUM_WAIT_OBJECTS + 1];
1540 void *opaque[MAXIMUM_WAIT_OBJECTS + 1];
1541 } WaitObjects;
1543 static WaitObjects wait_objects = {0};
1545 int qemu_add_wait_object(HANDLE handle, WaitObjectFunc *func, void *opaque)
1547 WaitObjects *w = &wait_objects;
1549 if (w->num >= MAXIMUM_WAIT_OBJECTS)
1550 return -1;
1551 w->events[w->num] = handle;
1552 w->func[w->num] = func;
1553 w->opaque[w->num] = opaque;
1554 w->num++;
1555 return 0;
1558 void qemu_del_wait_object(HANDLE handle, WaitObjectFunc *func, void *opaque)
1560 int i, found;
1561 WaitObjects *w = &wait_objects;
1563 found = 0;
1564 for (i = 0; i < w->num; i++) {
1565 if (w->events[i] == handle)
1566 found = 1;
1567 if (found) {
1568 w->events[i] = w->events[i + 1];
1569 w->func[i] = w->func[i + 1];
1570 w->opaque[i] = w->opaque[i + 1];
1573 if (found)
1574 w->num--;
1576 #endif
1578 /***********************************************************/
1579 /* machine registration */
1581 static QEMUMachine *first_machine = NULL;
1582 QEMUMachine *current_machine = NULL;
1584 int qemu_register_machine(QEMUMachine *m)
1586 QEMUMachine **pm;
1587 pm = &first_machine;
1588 while (*pm != NULL)
1589 pm = &(*pm)->next;
1590 m->next = NULL;
1591 *pm = m;
1592 return 0;
1595 static QEMUMachine *find_machine(const char *name)
1597 QEMUMachine *m;
1599 for(m = first_machine; m != NULL; m = m->next) {
1600 if (!strcmp(m->name, name))
1601 return m;
1602 if (m->alias && !strcmp(m->alias, name))
1603 return m;
1605 return NULL;
1608 static QEMUMachine *find_default_machine(void)
1610 QEMUMachine *m;
1612 for(m = first_machine; m != NULL; m = m->next) {
1613 if (m->is_default) {
1614 return m;
1617 return NULL;
1620 /***********************************************************/
1621 /* main execution loop */
1623 static void gui_update(void *opaque)
1625 uint64_t interval = GUI_REFRESH_INTERVAL;
1626 DisplayState *ds = opaque;
1627 DisplayChangeListener *dcl = ds->listeners;
1629 qemu_flush_coalesced_mmio_buffer();
1630 dpy_refresh(ds);
1632 while (dcl != NULL) {
1633 if (dcl->gui_timer_interval &&
1634 dcl->gui_timer_interval < interval)
1635 interval = dcl->gui_timer_interval;
1636 dcl = dcl->next;
1638 qemu_mod_timer(ds->gui_timer, interval + qemu_get_clock(rt_clock));
1641 static void nographic_update(void *opaque)
1643 uint64_t interval = GUI_REFRESH_INTERVAL;
1645 qemu_flush_coalesced_mmio_buffer();
1646 qemu_mod_timer(nographic_timer, interval + qemu_get_clock(rt_clock));
1649 struct vm_change_state_entry {
1650 VMChangeStateHandler *cb;
1651 void *opaque;
1652 QLIST_ENTRY (vm_change_state_entry) entries;
1655 static QLIST_HEAD(vm_change_state_head, vm_change_state_entry) vm_change_state_head;
1657 VMChangeStateEntry *qemu_add_vm_change_state_handler(VMChangeStateHandler *cb,
1658 void *opaque)
1660 VMChangeStateEntry *e;
1662 e = qemu_mallocz(sizeof (*e));
1664 e->cb = cb;
1665 e->opaque = opaque;
1666 QLIST_INSERT_HEAD(&vm_change_state_head, e, entries);
1667 return e;
1670 void qemu_del_vm_change_state_handler(VMChangeStateEntry *e)
1672 QLIST_REMOVE (e, entries);
1673 qemu_free (e);
1676 void vm_state_notify(int running, int reason)
1678 VMChangeStateEntry *e;
1680 for (e = vm_change_state_head.lh_first; e; e = e->entries.le_next) {
1681 e->cb(e->opaque, running, reason);
1685 void vm_start(void)
1687 if (!vm_running) {
1688 cpu_enable_ticks();
1689 vm_running = 1;
1690 vm_state_notify(1, 0);
1691 resume_all_vcpus();
1692 monitor_protocol_event(QEVENT_RESUME, NULL);
1696 /* reset/shutdown handler */
1698 typedef struct QEMUResetEntry {
1699 QTAILQ_ENTRY(QEMUResetEntry) entry;
1700 QEMUResetHandler *func;
1701 void *opaque;
1702 } QEMUResetEntry;
1704 static QTAILQ_HEAD(reset_handlers, QEMUResetEntry) reset_handlers =
1705 QTAILQ_HEAD_INITIALIZER(reset_handlers);
1706 static int reset_requested;
1707 static int shutdown_requested;
1708 static int powerdown_requested;
1709 int debug_requested;
1710 int vmstop_requested;
1711 static int exit_requested;
1713 int qemu_shutdown_requested(void)
1715 int r = shutdown_requested;
1716 shutdown_requested = 0;
1717 return r;
1720 int qemu_reset_requested(void)
1722 int r = reset_requested;
1723 reset_requested = 0;
1724 return r;
1727 int qemu_powerdown_requested(void)
1729 int r = powerdown_requested;
1730 powerdown_requested = 0;
1731 return r;
1734 int qemu_exit_requested(void)
1736 /* just return it, we'll exit() anyway */
1737 return exit_requested;
1740 static int qemu_debug_requested(void)
1742 int r = debug_requested;
1743 debug_requested = 0;
1744 return r;
1747 static int qemu_vmstop_requested(void)
1749 int r = vmstop_requested;
1750 vmstop_requested = 0;
1751 return r;
1754 void qemu_register_reset(QEMUResetHandler *func, void *opaque)
1756 QEMUResetEntry *re = qemu_mallocz(sizeof(QEMUResetEntry));
1758 re->func = func;
1759 re->opaque = opaque;
1760 QTAILQ_INSERT_TAIL(&reset_handlers, re, entry);
1763 void qemu_unregister_reset(QEMUResetHandler *func, void *opaque)
1765 QEMUResetEntry *re;
1767 QTAILQ_FOREACH(re, &reset_handlers, entry) {
1768 if (re->func == func && re->opaque == opaque) {
1769 QTAILQ_REMOVE(&reset_handlers, re, entry);
1770 qemu_free(re);
1771 return;
1776 void qemu_system_reset(void)
1778 QEMUResetEntry *re, *nre;
1780 /* reset all devices */
1781 QTAILQ_FOREACH_SAFE(re, &reset_handlers, entry, nre) {
1782 re->func(re->opaque);
1784 monitor_protocol_event(QEVENT_RESET, NULL);
1785 cpu_synchronize_all_post_reset();
1788 void qemu_system_reset_request(void)
1790 if (no_reboot) {
1791 shutdown_requested = 1;
1792 } else {
1793 reset_requested = 1;
1795 qemu_notify_event();
1798 void qemu_system_shutdown_request(void)
1800 shutdown_requested = 1;
1801 qemu_notify_event();
1804 void qemu_system_powerdown_request(void)
1806 powerdown_requested = 1;
1807 qemu_notify_event();
1810 void qemu_system_exit_request(void)
1812 exit_requested = 1;
1813 qemu_notify_event();
1816 #ifdef _WIN32
1817 static void host_main_loop_wait(int *timeout)
1819 int ret, ret2, i;
1820 PollingEntry *pe;
1823 /* XXX: need to suppress polling by better using win32 events */
1824 ret = 0;
1825 for(pe = first_polling_entry; pe != NULL; pe = pe->next) {
1826 ret |= pe->func(pe->opaque);
1828 if (ret == 0) {
1829 int err;
1830 WaitObjects *w = &wait_objects;
1832 ret = WaitForMultipleObjects(w->num, w->events, FALSE, *timeout);
1833 if (WAIT_OBJECT_0 + 0 <= ret && ret <= WAIT_OBJECT_0 + w->num - 1) {
1834 if (w->func[ret - WAIT_OBJECT_0])
1835 w->func[ret - WAIT_OBJECT_0](w->opaque[ret - WAIT_OBJECT_0]);
1837 /* Check for additional signaled events */
1838 for(i = (ret - WAIT_OBJECT_0 + 1); i < w->num; i++) {
1840 /* Check if event is signaled */
1841 ret2 = WaitForSingleObject(w->events[i], 0);
1842 if(ret2 == WAIT_OBJECT_0) {
1843 if (w->func[i])
1844 w->func[i](w->opaque[i]);
1845 } else if (ret2 == WAIT_TIMEOUT) {
1846 } else {
1847 err = GetLastError();
1848 fprintf(stderr, "WaitForSingleObject error %d %d\n", i, err);
1851 } else if (ret == WAIT_TIMEOUT) {
1852 } else {
1853 err = GetLastError();
1854 fprintf(stderr, "WaitForMultipleObjects error %d %d\n", ret, err);
1858 *timeout = 0;
1860 #else
1861 static void host_main_loop_wait(int *timeout)
1864 #endif
1866 void main_loop_wait(int nonblocking)
1868 IOHandlerRecord *ioh;
1869 fd_set rfds, wfds, xfds;
1870 int ret, nfds;
1871 struct timeval tv;
1872 int timeout;
1874 if (nonblocking)
1875 timeout = 0;
1876 else {
1877 timeout = qemu_calculate_timeout();
1878 qemu_bh_update_timeout(&timeout);
1881 host_main_loop_wait(&timeout);
1883 /* poll any events */
1884 /* XXX: separate device handlers from system ones */
1885 nfds = -1;
1886 FD_ZERO(&rfds);
1887 FD_ZERO(&wfds);
1888 FD_ZERO(&xfds);
1889 QLIST_FOREACH(ioh, &io_handlers, next) {
1890 if (ioh->deleted)
1891 continue;
1892 if (ioh->fd_read &&
1893 (!ioh->fd_read_poll ||
1894 ioh->fd_read_poll(ioh->opaque) != 0)) {
1895 FD_SET(ioh->fd, &rfds);
1896 if (ioh->fd > nfds)
1897 nfds = ioh->fd;
1899 if (ioh->fd_write) {
1900 FD_SET(ioh->fd, &wfds);
1901 if (ioh->fd > nfds)
1902 nfds = ioh->fd;
1906 tv.tv_sec = timeout / 1000;
1907 tv.tv_usec = (timeout % 1000) * 1000;
1909 slirp_select_fill(&nfds, &rfds, &wfds, &xfds);
1911 qemu_mutex_unlock_iothread();
1912 ret = select(nfds + 1, &rfds, &wfds, &xfds, &tv);
1913 qemu_mutex_lock_iothread();
1914 if (ret > 0) {
1915 IOHandlerRecord *pioh;
1917 QLIST_FOREACH_SAFE(ioh, &io_handlers, next, pioh) {
1918 if (ioh->deleted) {
1919 QLIST_REMOVE(ioh, next);
1920 qemu_free(ioh);
1921 continue;
1923 if (ioh->fd_read && FD_ISSET(ioh->fd, &rfds)) {
1924 ioh->fd_read(ioh->opaque);
1926 if (ioh->fd_write && FD_ISSET(ioh->fd, &wfds)) {
1927 ioh->fd_write(ioh->opaque);
1932 slirp_select_poll(&rfds, &wfds, &xfds, (ret < 0));
1934 qemu_run_all_timers();
1936 /* Check bottom-halves last in case any of the earlier events triggered
1937 them. */
1938 qemu_bh_poll();
1942 static int vm_can_run(void)
1944 if (powerdown_requested)
1945 return 0;
1946 if (reset_requested)
1947 return 0;
1948 if (shutdown_requested)
1949 return 0;
1950 if (debug_requested)
1951 return 0;
1952 if (exit_requested)
1953 return 0;
1954 return 1;
1957 qemu_irq qemu_system_powerdown;
1959 static void main_loop(void)
1961 int r;
1963 qemu_main_loop_start();
1965 for (;;) {
1966 do {
1967 bool nonblocking = false;
1968 #ifdef CONFIG_PROFILER
1969 int64_t ti;
1970 #endif
1971 #ifndef CONFIG_IOTHREAD
1972 nonblocking = tcg_cpu_exec();
1973 #endif
1974 #ifdef CONFIG_PROFILER
1975 ti = profile_getclock();
1976 #endif
1977 main_loop_wait(nonblocking);
1978 #ifdef CONFIG_PROFILER
1979 dev_time += profile_getclock() - ti;
1980 #endif
1981 } while (vm_can_run());
1983 if ((r = qemu_debug_requested())) {
1984 vm_stop(r);
1986 if (qemu_shutdown_requested()) {
1987 monitor_protocol_event(QEVENT_SHUTDOWN, NULL);
1988 if (no_shutdown) {
1989 vm_stop(0);
1990 no_shutdown = 0;
1991 } else
1992 break;
1994 if (qemu_reset_requested()) {
1995 pause_all_vcpus();
1996 qemu_system_reset();
1997 resume_all_vcpus();
1999 if (qemu_powerdown_requested()) {
2000 monitor_protocol_event(QEVENT_POWERDOWN, NULL);
2001 qemu_irq_raise(qemu_system_powerdown);
2003 if ((r = qemu_vmstop_requested())) {
2004 vm_stop(r);
2006 if (qemu_exit_requested()) {
2007 exit(0);
2010 pause_all_vcpus();
2013 static void version(void)
2015 printf("QEMU emulator version " QEMU_VERSION QEMU_PKGVERSION ", Copyright (c) 2003-2008 Fabrice Bellard\n");
2018 static void help(int exitcode)
2020 const char *options_help =
2021 #define DEF(option, opt_arg, opt_enum, opt_help, arch_mask) \
2022 opt_help
2023 #define DEFHEADING(text) stringify(text) "\n"
2024 #include "qemu-options.h"
2025 #undef DEF
2026 #undef DEFHEADING
2027 #undef GEN_DOCS
2029 version();
2030 printf("usage: %s [options] [disk_image]\n"
2031 "\n"
2032 "'disk_image' is a raw hard disk image for IDE hard disk 0\n"
2033 "\n"
2034 "%s\n"
2035 "During emulation, the following keys are useful:\n"
2036 "ctrl-alt-f toggle full screen\n"
2037 "ctrl-alt-n switch to virtual console 'n'\n"
2038 "ctrl-alt toggle mouse and keyboard grab\n"
2039 "\n"
2040 "When using -nographic, press 'ctrl-a h' to get some help.\n",
2041 "qemu",
2042 options_help);
2043 exit(exitcode);
2046 #define HAS_ARG 0x0001
2048 enum {
2049 #define DEF(option, opt_arg, opt_enum, opt_help, arch_mask) \
2050 opt_enum,
2051 #define DEFHEADING(text)
2052 #include "qemu-options.h"
2053 #undef DEF
2054 #undef DEFHEADING
2055 #undef GEN_DOCS
2058 typedef struct QEMUOption {
2059 const char *name;
2060 int flags;
2061 int index;
2062 uint32_t arch_mask;
2063 } QEMUOption;
2065 static const QEMUOption qemu_options[] = {
2066 { "h", 0, QEMU_OPTION_h, QEMU_ARCH_ALL },
2067 #define DEF(option, opt_arg, opt_enum, opt_help, arch_mask) \
2068 { option, opt_arg, opt_enum, arch_mask },
2069 #define DEFHEADING(text)
2070 #include "qemu-options.h"
2071 #undef DEF
2072 #undef DEFHEADING
2073 #undef GEN_DOCS
2074 { NULL },
2076 static void select_vgahw (const char *p)
2078 const char *opts;
2080 default_vga = 0;
2081 vga_interface_type = VGA_NONE;
2082 if (strstart(p, "std", &opts)) {
2083 vga_interface_type = VGA_STD;
2084 } else if (strstart(p, "cirrus", &opts)) {
2085 vga_interface_type = VGA_CIRRUS;
2086 } else if (strstart(p, "vmware", &opts)) {
2087 vga_interface_type = VGA_VMWARE;
2088 } else if (strstart(p, "xenfb", &opts)) {
2089 vga_interface_type = VGA_XENFB;
2090 } else if (!strstart(p, "none", &opts)) {
2091 invalid_vga:
2092 fprintf(stderr, "Unknown vga type: %s\n", p);
2093 exit(1);
2095 while (*opts) {
2096 const char *nextopt;
2098 if (strstart(opts, ",retrace=", &nextopt)) {
2099 opts = nextopt;
2100 if (strstart(opts, "dumb", &nextopt))
2101 vga_retrace_method = VGA_RETRACE_DUMB;
2102 else if (strstart(opts, "precise", &nextopt))
2103 vga_retrace_method = VGA_RETRACE_PRECISE;
2104 else goto invalid_vga;
2105 } else goto invalid_vga;
2106 opts = nextopt;
2110 static int balloon_parse(const char *arg)
2112 QemuOpts *opts;
2114 if (strcmp(arg, "none") == 0) {
2115 return 0;
2118 if (!strncmp(arg, "virtio", 6)) {
2119 if (arg[6] == ',') {
2120 /* have params -> parse them */
2121 opts = qemu_opts_parse(&qemu_device_opts, arg+7, 0);
2122 if (!opts)
2123 return -1;
2124 } else {
2125 /* create empty opts */
2126 opts = qemu_opts_create(&qemu_device_opts, NULL, 0);
2128 qemu_opt_set(opts, "driver", "virtio-balloon-pci");
2129 return 0;
2132 return -1;
2135 #ifdef _WIN32
2136 static BOOL WINAPI qemu_ctrl_handler(DWORD type)
2138 exit(STATUS_CONTROL_C_EXIT);
2139 return TRUE;
2141 #endif
2143 #ifndef _WIN32
2145 static void termsig_handler(int signal)
2147 qemu_system_shutdown_request();
2150 static void sigchld_handler(int signal)
2152 waitpid(-1, NULL, WNOHANG);
2155 static void sighandler_setup(void)
2157 struct sigaction act;
2159 memset(&act, 0, sizeof(act));
2160 act.sa_handler = termsig_handler;
2161 sigaction(SIGINT, &act, NULL);
2162 sigaction(SIGHUP, &act, NULL);
2163 sigaction(SIGTERM, &act, NULL);
2165 act.sa_handler = sigchld_handler;
2166 act.sa_flags = SA_NOCLDSTOP;
2167 sigaction(SIGCHLD, &act, NULL);
2170 #endif
2172 #ifdef _WIN32
2173 /* Look for support files in the same directory as the executable. */
2174 static char *find_datadir(const char *argv0)
2176 char *p;
2177 char buf[MAX_PATH];
2178 DWORD len;
2180 len = GetModuleFileName(NULL, buf, sizeof(buf) - 1);
2181 if (len == 0) {
2182 return NULL;
2185 buf[len] = 0;
2186 p = buf + len - 1;
2187 while (p != buf && *p != '\\')
2188 p--;
2189 *p = 0;
2190 if (access(buf, R_OK) == 0) {
2191 return qemu_strdup(buf);
2193 return NULL;
2195 #else /* !_WIN32 */
2197 /* Find a likely location for support files using the location of the binary.
2198 For installed binaries this will be "$bindir/../share/qemu". When
2199 running from the build tree this will be "$bindir/../pc-bios". */
2200 #define SHARE_SUFFIX "/share/qemu"
2201 #define BUILD_SUFFIX "/pc-bios"
2202 static char *find_datadir(const char *argv0)
2204 char *dir;
2205 char *p = NULL;
2206 char *res;
2207 char buf[PATH_MAX];
2208 size_t max_len;
2210 #if defined(__linux__)
2212 int len;
2213 len = readlink("/proc/self/exe", buf, sizeof(buf) - 1);
2214 if (len > 0) {
2215 buf[len] = 0;
2216 p = buf;
2219 #elif defined(__FreeBSD__)
2221 static int mib[4] = {CTL_KERN, KERN_PROC, KERN_PROC_PATHNAME, -1};
2222 size_t len = sizeof(buf) - 1;
2224 *buf = '\0';
2225 if (!sysctl(mib, sizeof(mib)/sizeof(*mib), buf, &len, NULL, 0) &&
2226 *buf) {
2227 buf[sizeof(buf) - 1] = '\0';
2228 p = buf;
2231 #endif
2232 /* If we don't have any way of figuring out the actual executable
2233 location then try argv[0]. */
2234 if (!p) {
2235 p = realpath(argv0, buf);
2236 if (!p) {
2237 return NULL;
2240 dir = dirname(p);
2241 dir = dirname(dir);
2243 max_len = strlen(dir) +
2244 MAX(strlen(SHARE_SUFFIX), strlen(BUILD_SUFFIX)) + 1;
2245 res = qemu_mallocz(max_len);
2246 snprintf(res, max_len, "%s%s", dir, SHARE_SUFFIX);
2247 if (access(res, R_OK)) {
2248 snprintf(res, max_len, "%s%s", dir, BUILD_SUFFIX);
2249 if (access(res, R_OK)) {
2250 qemu_free(res);
2251 res = NULL;
2255 return res;
2257 #undef SHARE_SUFFIX
2258 #undef BUILD_SUFFIX
2259 #endif
2261 char *qemu_find_file(int type, const char *name)
2263 int len;
2264 const char *subdir;
2265 char *buf;
2267 /* If name contains path separators then try it as a straight path. */
2268 if ((strchr(name, '/') || strchr(name, '\\'))
2269 && access(name, R_OK) == 0) {
2270 return qemu_strdup(name);
2272 switch (type) {
2273 case QEMU_FILE_TYPE_BIOS:
2274 subdir = "";
2275 break;
2276 case QEMU_FILE_TYPE_KEYMAP:
2277 subdir = "keymaps/";
2278 break;
2279 default:
2280 abort();
2282 len = strlen(data_dir) + strlen(name) + strlen(subdir) + 2;
2283 buf = qemu_mallocz(len);
2284 snprintf(buf, len, "%s/%s%s", data_dir, subdir, name);
2285 if (access(buf, R_OK)) {
2286 qemu_free(buf);
2287 return NULL;
2289 return buf;
2292 static int device_help_func(QemuOpts *opts, void *opaque)
2294 return qdev_device_help(opts);
2297 static int device_init_func(QemuOpts *opts, void *opaque)
2299 DeviceState *dev;
2301 dev = qdev_device_add(opts);
2302 if (!dev)
2303 return -1;
2304 return 0;
2307 static int chardev_init_func(QemuOpts *opts, void *opaque)
2309 CharDriverState *chr;
2311 chr = qemu_chr_open_opts(opts, NULL);
2312 if (!chr)
2313 return -1;
2314 return 0;
2317 #ifdef CONFIG_LINUX
2318 static int fsdev_init_func(QemuOpts *opts, void *opaque)
2320 int ret;
2321 ret = qemu_fsdev_add(opts);
2323 return ret;
2325 #endif
2327 static int mon_init_func(QemuOpts *opts, void *opaque)
2329 CharDriverState *chr;
2330 const char *chardev;
2331 const char *mode;
2332 int flags;
2334 mode = qemu_opt_get(opts, "mode");
2335 if (mode == NULL) {
2336 mode = "readline";
2338 if (strcmp(mode, "readline") == 0) {
2339 flags = MONITOR_USE_READLINE;
2340 } else if (strcmp(mode, "control") == 0) {
2341 flags = MONITOR_USE_CONTROL;
2342 } else {
2343 fprintf(stderr, "unknown monitor mode \"%s\"\n", mode);
2344 exit(1);
2347 if (qemu_opt_get_bool(opts, "default", 0))
2348 flags |= MONITOR_IS_DEFAULT;
2350 chardev = qemu_opt_get(opts, "chardev");
2351 chr = qemu_chr_find(chardev);
2352 if (chr == NULL) {
2353 fprintf(stderr, "chardev \"%s\" not found\n", chardev);
2354 exit(1);
2357 monitor_init(chr, flags);
2358 return 0;
2361 static void monitor_parse(const char *optarg, const char *mode)
2363 static int monitor_device_index = 0;
2364 QemuOpts *opts;
2365 const char *p;
2366 char label[32];
2367 int def = 0;
2369 if (strstart(optarg, "chardev:", &p)) {
2370 snprintf(label, sizeof(label), "%s", p);
2371 } else {
2372 snprintf(label, sizeof(label), "compat_monitor%d",
2373 monitor_device_index);
2374 if (monitor_device_index == 0) {
2375 def = 1;
2377 opts = qemu_chr_parse_compat(label, optarg);
2378 if (!opts) {
2379 fprintf(stderr, "parse error: %s\n", optarg);
2380 exit(1);
2384 opts = qemu_opts_create(&qemu_mon_opts, label, 1);
2385 if (!opts) {
2386 fprintf(stderr, "duplicate chardev: %s\n", label);
2387 exit(1);
2389 qemu_opt_set(opts, "mode", mode);
2390 qemu_opt_set(opts, "chardev", label);
2391 if (def)
2392 qemu_opt_set(opts, "default", "on");
2393 monitor_device_index++;
2396 struct device_config {
2397 enum {
2398 DEV_USB, /* -usbdevice */
2399 DEV_BT, /* -bt */
2400 DEV_SERIAL, /* -serial */
2401 DEV_PARALLEL, /* -parallel */
2402 DEV_VIRTCON, /* -virtioconsole */
2403 DEV_DEBUGCON, /* -debugcon */
2404 } type;
2405 const char *cmdline;
2406 QTAILQ_ENTRY(device_config) next;
2408 QTAILQ_HEAD(, device_config) device_configs = QTAILQ_HEAD_INITIALIZER(device_configs);
2410 static void add_device_config(int type, const char *cmdline)
2412 struct device_config *conf;
2414 conf = qemu_mallocz(sizeof(*conf));
2415 conf->type = type;
2416 conf->cmdline = cmdline;
2417 QTAILQ_INSERT_TAIL(&device_configs, conf, next);
2420 static int foreach_device_config(int type, int (*func)(const char *cmdline))
2422 struct device_config *conf;
2423 int rc;
2425 QTAILQ_FOREACH(conf, &device_configs, next) {
2426 if (conf->type != type)
2427 continue;
2428 rc = func(conf->cmdline);
2429 if (0 != rc)
2430 return rc;
2432 return 0;
2435 static int serial_parse(const char *devname)
2437 static int index = 0;
2438 char label[32];
2440 if (strcmp(devname, "none") == 0)
2441 return 0;
2442 if (index == MAX_SERIAL_PORTS) {
2443 fprintf(stderr, "qemu: too many serial ports\n");
2444 exit(1);
2446 snprintf(label, sizeof(label), "serial%d", index);
2447 serial_hds[index] = qemu_chr_open(label, devname, NULL);
2448 if (!serial_hds[index]) {
2449 fprintf(stderr, "qemu: could not open serial device '%s': %s\n",
2450 devname, strerror(errno));
2451 return -1;
2453 index++;
2454 return 0;
2457 static int parallel_parse(const char *devname)
2459 static int index = 0;
2460 char label[32];
2462 if (strcmp(devname, "none") == 0)
2463 return 0;
2464 if (index == MAX_PARALLEL_PORTS) {
2465 fprintf(stderr, "qemu: too many parallel ports\n");
2466 exit(1);
2468 snprintf(label, sizeof(label), "parallel%d", index);
2469 parallel_hds[index] = qemu_chr_open(label, devname, NULL);
2470 if (!parallel_hds[index]) {
2471 fprintf(stderr, "qemu: could not open parallel device '%s': %s\n",
2472 devname, strerror(errno));
2473 return -1;
2475 index++;
2476 return 0;
2479 static int virtcon_parse(const char *devname)
2481 static int index = 0;
2482 char label[32];
2483 QemuOpts *bus_opts, *dev_opts;
2485 if (strcmp(devname, "none") == 0)
2486 return 0;
2487 if (index == MAX_VIRTIO_CONSOLES) {
2488 fprintf(stderr, "qemu: too many virtio consoles\n");
2489 exit(1);
2492 bus_opts = qemu_opts_create(&qemu_device_opts, NULL, 0);
2493 qemu_opt_set(bus_opts, "driver", "virtio-serial");
2495 dev_opts = qemu_opts_create(&qemu_device_opts, NULL, 0);
2496 qemu_opt_set(dev_opts, "driver", "virtconsole");
2498 snprintf(label, sizeof(label), "virtcon%d", index);
2499 virtcon_hds[index] = qemu_chr_open(label, devname, NULL);
2500 if (!virtcon_hds[index]) {
2501 fprintf(stderr, "qemu: could not open virtio console '%s': %s\n",
2502 devname, strerror(errno));
2503 return -1;
2505 qemu_opt_set(dev_opts, "chardev", label);
2507 index++;
2508 return 0;
2511 static int debugcon_parse(const char *devname)
2513 QemuOpts *opts;
2515 if (!qemu_chr_open("debugcon", devname, NULL)) {
2516 exit(1);
2518 opts = qemu_opts_create(&qemu_device_opts, "debugcon", 1);
2519 if (!opts) {
2520 fprintf(stderr, "qemu: already have a debugcon device\n");
2521 exit(1);
2523 qemu_opt_set(opts, "driver", "isa-debugcon");
2524 qemu_opt_set(opts, "chardev", "debugcon");
2525 return 0;
2528 static const QEMUOption *lookup_opt(int argc, char **argv,
2529 const char **poptarg, int *poptind)
2531 const QEMUOption *popt;
2532 int optind = *poptind;
2533 char *r = argv[optind];
2534 const char *optarg;
2536 loc_set_cmdline(argv, optind, 1);
2537 optind++;
2538 /* Treat --foo the same as -foo. */
2539 if (r[1] == '-')
2540 r++;
2541 popt = qemu_options;
2542 for(;;) {
2543 if (!popt->name) {
2544 error_report("invalid option");
2545 exit(1);
2547 if (!strcmp(popt->name, r + 1))
2548 break;
2549 popt++;
2551 if (popt->flags & HAS_ARG) {
2552 if (optind >= argc) {
2553 error_report("requires an argument");
2554 exit(1);
2556 optarg = argv[optind++];
2557 loc_set_cmdline(argv, optind - 2, 2);
2558 } else {
2559 optarg = NULL;
2562 *poptarg = optarg;
2563 *poptind = optind;
2565 return popt;
2568 int main(int argc, char **argv, char **envp)
2570 const char *gdbstub_dev = NULL;
2571 int i;
2572 int snapshot, linux_boot;
2573 const char *icount_option = NULL;
2574 const char *initrd_filename;
2575 const char *kernel_filename, *kernel_cmdline;
2576 char boot_devices[33] = "cad"; /* default to HD->floppy->CD-ROM */
2577 DisplayState *ds;
2578 DisplayChangeListener *dcl;
2579 int cyls, heads, secs, translation;
2580 QemuOpts *hda_opts = NULL, *opts;
2581 int optind;
2582 const char *optarg;
2583 const char *loadvm = NULL;
2584 QEMUMachine *machine;
2585 const char *cpu_model;
2586 #ifndef _WIN32
2587 int fds[2];
2588 #endif
2589 int tb_size;
2590 const char *pid_file = NULL;
2591 const char *incoming = NULL;
2592 #ifndef _WIN32
2593 int fd = 0;
2594 struct passwd *pwd = NULL;
2595 const char *chroot_dir = NULL;
2596 const char *run_as = NULL;
2597 #endif
2598 int show_vnc_port = 0;
2599 int defconfig = 1;
2601 error_set_progname(argv[0]);
2603 init_clocks();
2605 qemu_cache_utils_init(envp);
2607 QLIST_INIT (&vm_change_state_head);
2608 #ifndef _WIN32
2610 struct sigaction act;
2611 sigfillset(&act.sa_mask);
2612 act.sa_flags = 0;
2613 act.sa_handler = SIG_IGN;
2614 sigaction(SIGPIPE, &act, NULL);
2616 #else
2617 SetConsoleCtrlHandler(qemu_ctrl_handler, TRUE);
2618 /* Note: cpu_interrupt() is currently not SMP safe, so we force
2619 QEMU to run on a single CPU */
2621 HANDLE h;
2622 DWORD mask, smask;
2623 int i;
2624 h = GetCurrentProcess();
2625 if (GetProcessAffinityMask(h, &mask, &smask)) {
2626 for(i = 0; i < 32; i++) {
2627 if (mask & (1 << i))
2628 break;
2630 if (i != 32) {
2631 mask = 1 << i;
2632 SetProcessAffinityMask(h, mask);
2636 #endif
2638 module_call_init(MODULE_INIT_MACHINE);
2639 machine = find_default_machine();
2640 cpu_model = NULL;
2641 initrd_filename = NULL;
2642 ram_size = 0;
2643 snapshot = 0;
2644 kernel_filename = NULL;
2645 kernel_cmdline = "";
2646 cyls = heads = secs = 0;
2647 translation = BIOS_ATA_TRANSLATION_AUTO;
2649 for (i = 0; i < MAX_NODES; i++) {
2650 node_mem[i] = 0;
2651 node_cpumask[i] = 0;
2654 nb_numa_nodes = 0;
2655 nb_nics = 0;
2657 tb_size = 0;
2658 autostart= 1;
2660 /* first pass of option parsing */
2661 optind = 1;
2662 while (optind < argc) {
2663 if (argv[optind][0] != '-') {
2664 /* disk image */
2665 optind++;
2666 continue;
2667 } else {
2668 const QEMUOption *popt;
2670 popt = lookup_opt(argc, argv, &optarg, &optind);
2671 switch (popt->index) {
2672 case QEMU_OPTION_nodefconfig:
2673 defconfig=0;
2674 break;
2679 if (defconfig) {
2680 int ret;
2682 ret = qemu_read_config_file(CONFIG_QEMU_CONFDIR "/qemu.conf");
2683 if (ret == -EINVAL) {
2684 exit(1);
2687 ret = qemu_read_config_file(arch_config_name);
2688 if (ret == -EINVAL) {
2689 exit(1);
2692 cpudef_init();
2694 /* second pass of option parsing */
2695 optind = 1;
2696 for(;;) {
2697 if (optind >= argc)
2698 break;
2699 if (argv[optind][0] != '-') {
2700 hda_opts = drive_add(argv[optind++], HD_ALIAS, 0);
2701 } else {
2702 const QEMUOption *popt;
2704 popt = lookup_opt(argc, argv, &optarg, &optind);
2705 if (!(popt->arch_mask & arch_type)) {
2706 printf("Option %s not supported for this target\n", popt->name);
2707 exit(1);
2709 switch(popt->index) {
2710 case QEMU_OPTION_M:
2711 machine = find_machine(optarg);
2712 if (!machine) {
2713 QEMUMachine *m;
2714 printf("Supported machines are:\n");
2715 for(m = first_machine; m != NULL; m = m->next) {
2716 if (m->alias)
2717 printf("%-10s %s (alias of %s)\n",
2718 m->alias, m->desc, m->name);
2719 printf("%-10s %s%s\n",
2720 m->name, m->desc,
2721 m->is_default ? " (default)" : "");
2723 exit(*optarg != '?');
2725 break;
2726 case QEMU_OPTION_cpu:
2727 /* hw initialization will check this */
2728 if (*optarg == '?') {
2729 list_cpus(stdout, &fprintf, optarg);
2730 exit(0);
2731 } else {
2732 cpu_model = optarg;
2734 break;
2735 case QEMU_OPTION_initrd:
2736 initrd_filename = optarg;
2737 break;
2738 case QEMU_OPTION_hda:
2739 if (cyls == 0)
2740 hda_opts = drive_add(optarg, HD_ALIAS, 0);
2741 else
2742 hda_opts = drive_add(optarg, HD_ALIAS
2743 ",cyls=%d,heads=%d,secs=%d%s",
2744 0, cyls, heads, secs,
2745 translation == BIOS_ATA_TRANSLATION_LBA ?
2746 ",trans=lba" :
2747 translation == BIOS_ATA_TRANSLATION_NONE ?
2748 ",trans=none" : "");
2749 break;
2750 case QEMU_OPTION_hdb:
2751 case QEMU_OPTION_hdc:
2752 case QEMU_OPTION_hdd:
2753 drive_add(optarg, HD_ALIAS, popt->index - QEMU_OPTION_hda);
2754 break;
2755 case QEMU_OPTION_drive:
2756 drive_add(NULL, "%s", optarg);
2757 break;
2758 case QEMU_OPTION_set:
2759 if (qemu_set_option(optarg) != 0)
2760 exit(1);
2761 break;
2762 case QEMU_OPTION_global:
2763 if (qemu_global_option(optarg) != 0)
2764 exit(1);
2765 break;
2766 case QEMU_OPTION_mtdblock:
2767 drive_add(optarg, MTD_ALIAS);
2768 break;
2769 case QEMU_OPTION_sd:
2770 drive_add(optarg, SD_ALIAS);
2771 break;
2772 case QEMU_OPTION_pflash:
2773 drive_add(optarg, PFLASH_ALIAS);
2774 break;
2775 case QEMU_OPTION_snapshot:
2776 snapshot = 1;
2777 break;
2778 case QEMU_OPTION_hdachs:
2780 const char *p;
2781 p = optarg;
2782 cyls = strtol(p, (char **)&p, 0);
2783 if (cyls < 1 || cyls > 16383)
2784 goto chs_fail;
2785 if (*p != ',')
2786 goto chs_fail;
2787 p++;
2788 heads = strtol(p, (char **)&p, 0);
2789 if (heads < 1 || heads > 16)
2790 goto chs_fail;
2791 if (*p != ',')
2792 goto chs_fail;
2793 p++;
2794 secs = strtol(p, (char **)&p, 0);
2795 if (secs < 1 || secs > 63)
2796 goto chs_fail;
2797 if (*p == ',') {
2798 p++;
2799 if (!strcmp(p, "none"))
2800 translation = BIOS_ATA_TRANSLATION_NONE;
2801 else if (!strcmp(p, "lba"))
2802 translation = BIOS_ATA_TRANSLATION_LBA;
2803 else if (!strcmp(p, "auto"))
2804 translation = BIOS_ATA_TRANSLATION_AUTO;
2805 else
2806 goto chs_fail;
2807 } else if (*p != '\0') {
2808 chs_fail:
2809 fprintf(stderr, "qemu: invalid physical CHS format\n");
2810 exit(1);
2812 if (hda_opts != NULL) {
2813 char num[16];
2814 snprintf(num, sizeof(num), "%d", cyls);
2815 qemu_opt_set(hda_opts, "cyls", num);
2816 snprintf(num, sizeof(num), "%d", heads);
2817 qemu_opt_set(hda_opts, "heads", num);
2818 snprintf(num, sizeof(num), "%d", secs);
2819 qemu_opt_set(hda_opts, "secs", num);
2820 if (translation == BIOS_ATA_TRANSLATION_LBA)
2821 qemu_opt_set(hda_opts, "trans", "lba");
2822 if (translation == BIOS_ATA_TRANSLATION_NONE)
2823 qemu_opt_set(hda_opts, "trans", "none");
2826 break;
2827 case QEMU_OPTION_numa:
2828 if (nb_numa_nodes >= MAX_NODES) {
2829 fprintf(stderr, "qemu: too many NUMA nodes\n");
2830 exit(1);
2832 numa_add(optarg);
2833 break;
2834 case QEMU_OPTION_nographic:
2835 display_type = DT_NOGRAPHIC;
2836 break;
2837 #ifdef CONFIG_CURSES
2838 case QEMU_OPTION_curses:
2839 display_type = DT_CURSES;
2840 break;
2841 #endif
2842 case QEMU_OPTION_portrait:
2843 graphic_rotate = 1;
2844 break;
2845 case QEMU_OPTION_kernel:
2846 kernel_filename = optarg;
2847 break;
2848 case QEMU_OPTION_append:
2849 kernel_cmdline = optarg;
2850 break;
2851 case QEMU_OPTION_cdrom:
2852 drive_add(optarg, CDROM_ALIAS);
2853 break;
2854 case QEMU_OPTION_boot:
2856 static const char * const params[] = {
2857 "order", "once", "menu", NULL
2859 char buf[sizeof(boot_devices)];
2860 char *standard_boot_devices;
2861 int legacy = 0;
2863 if (!strchr(optarg, '=')) {
2864 legacy = 1;
2865 pstrcpy(buf, sizeof(buf), optarg);
2866 } else if (check_params(buf, sizeof(buf), params, optarg) < 0) {
2867 fprintf(stderr,
2868 "qemu: unknown boot parameter '%s' in '%s'\n",
2869 buf, optarg);
2870 exit(1);
2873 if (legacy ||
2874 get_param_value(buf, sizeof(buf), "order", optarg)) {
2875 validate_bootdevices(buf);
2876 pstrcpy(boot_devices, sizeof(boot_devices), buf);
2878 if (!legacy) {
2879 if (get_param_value(buf, sizeof(buf),
2880 "once", optarg)) {
2881 validate_bootdevices(buf);
2882 standard_boot_devices = qemu_strdup(boot_devices);
2883 pstrcpy(boot_devices, sizeof(boot_devices), buf);
2884 qemu_register_reset(restore_boot_devices,
2885 standard_boot_devices);
2887 if (get_param_value(buf, sizeof(buf),
2888 "menu", optarg)) {
2889 if (!strcmp(buf, "on")) {
2890 boot_menu = 1;
2891 } else if (!strcmp(buf, "off")) {
2892 boot_menu = 0;
2893 } else {
2894 fprintf(stderr,
2895 "qemu: invalid option value '%s'\n",
2896 buf);
2897 exit(1);
2902 break;
2903 case QEMU_OPTION_fda:
2904 case QEMU_OPTION_fdb:
2905 drive_add(optarg, FD_ALIAS, popt->index - QEMU_OPTION_fda);
2906 break;
2907 case QEMU_OPTION_no_fd_bootchk:
2908 fd_bootchk = 0;
2909 break;
2910 case QEMU_OPTION_netdev:
2911 if (net_client_parse(&qemu_netdev_opts, optarg) == -1) {
2912 exit(1);
2914 break;
2915 case QEMU_OPTION_net:
2916 if (net_client_parse(&qemu_net_opts, optarg) == -1) {
2917 exit(1);
2919 break;
2920 #ifdef CONFIG_SLIRP
2921 case QEMU_OPTION_tftp:
2922 legacy_tftp_prefix = optarg;
2923 break;
2924 case QEMU_OPTION_bootp:
2925 legacy_bootp_filename = optarg;
2926 break;
2927 #ifndef _WIN32
2928 case QEMU_OPTION_smb:
2929 if (net_slirp_smb(optarg) < 0)
2930 exit(1);
2931 break;
2932 #endif
2933 case QEMU_OPTION_redir:
2934 if (net_slirp_redir(optarg) < 0)
2935 exit(1);
2936 break;
2937 #endif
2938 case QEMU_OPTION_bt:
2939 add_device_config(DEV_BT, optarg);
2940 break;
2941 case QEMU_OPTION_audio_help:
2942 if (!(audio_available())) {
2943 printf("Option %s not supported for this target\n", popt->name);
2944 exit(1);
2946 AUD_help ();
2947 exit (0);
2948 break;
2949 case QEMU_OPTION_soundhw:
2950 if (!(audio_available())) {
2951 printf("Option %s not supported for this target\n", popt->name);
2952 exit(1);
2954 select_soundhw (optarg);
2955 break;
2956 case QEMU_OPTION_h:
2957 help(0);
2958 break;
2959 case QEMU_OPTION_version:
2960 version();
2961 exit(0);
2962 break;
2963 case QEMU_OPTION_m: {
2964 uint64_t value;
2965 char *ptr;
2967 value = strtoul(optarg, &ptr, 10);
2968 switch (*ptr) {
2969 case 0: case 'M': case 'm':
2970 value <<= 20;
2971 break;
2972 case 'G': case 'g':
2973 value <<= 30;
2974 break;
2975 default:
2976 fprintf(stderr, "qemu: invalid ram size: %s\n", optarg);
2977 exit(1);
2980 /* On 32-bit hosts, QEMU is limited by virtual address space */
2981 if (value > (2047 << 20) && HOST_LONG_BITS == 32) {
2982 fprintf(stderr, "qemu: at most 2047 MB RAM can be simulated\n");
2983 exit(1);
2985 if (value != (uint64_t)(ram_addr_t)value) {
2986 fprintf(stderr, "qemu: ram size too large\n");
2987 exit(1);
2989 ram_size = value;
2990 break;
2992 case QEMU_OPTION_mempath:
2993 mem_path = optarg;
2994 break;
2995 #ifdef MAP_POPULATE
2996 case QEMU_OPTION_mem_prealloc:
2997 mem_prealloc = 1;
2998 break;
2999 #endif
3000 case QEMU_OPTION_d:
3001 set_cpu_log(optarg);
3002 break;
3003 case QEMU_OPTION_s:
3004 gdbstub_dev = "tcp::" DEFAULT_GDBSTUB_PORT;
3005 break;
3006 case QEMU_OPTION_gdb:
3007 gdbstub_dev = optarg;
3008 break;
3009 case QEMU_OPTION_L:
3010 data_dir = optarg;
3011 break;
3012 case QEMU_OPTION_bios:
3013 bios_name = optarg;
3014 break;
3015 case QEMU_OPTION_singlestep:
3016 singlestep = 1;
3017 break;
3018 case QEMU_OPTION_S:
3019 autostart = 0;
3020 break;
3021 case QEMU_OPTION_k:
3022 keyboard_layout = optarg;
3023 break;
3024 case QEMU_OPTION_localtime:
3025 rtc_utc = 0;
3026 break;
3027 case QEMU_OPTION_vga:
3028 select_vgahw (optarg);
3029 break;
3030 case QEMU_OPTION_g:
3032 const char *p;
3033 int w, h, depth;
3034 p = optarg;
3035 w = strtol(p, (char **)&p, 10);
3036 if (w <= 0) {
3037 graphic_error:
3038 fprintf(stderr, "qemu: invalid resolution or depth\n");
3039 exit(1);
3041 if (*p != 'x')
3042 goto graphic_error;
3043 p++;
3044 h = strtol(p, (char **)&p, 10);
3045 if (h <= 0)
3046 goto graphic_error;
3047 if (*p == 'x') {
3048 p++;
3049 depth = strtol(p, (char **)&p, 10);
3050 if (depth != 8 && depth != 15 && depth != 16 &&
3051 depth != 24 && depth != 32)
3052 goto graphic_error;
3053 } else if (*p == '\0') {
3054 depth = graphic_depth;
3055 } else {
3056 goto graphic_error;
3059 graphic_width = w;
3060 graphic_height = h;
3061 graphic_depth = depth;
3063 break;
3064 case QEMU_OPTION_echr:
3066 char *r;
3067 term_escape_char = strtol(optarg, &r, 0);
3068 if (r == optarg)
3069 printf("Bad argument to echr\n");
3070 break;
3072 case QEMU_OPTION_monitor:
3073 monitor_parse(optarg, "readline");
3074 default_monitor = 0;
3075 break;
3076 case QEMU_OPTION_qmp:
3077 monitor_parse(optarg, "control");
3078 default_monitor = 0;
3079 break;
3080 case QEMU_OPTION_mon:
3081 opts = qemu_opts_parse(&qemu_mon_opts, optarg, 1);
3082 if (!opts) {
3083 exit(1);
3085 default_monitor = 0;
3086 break;
3087 case QEMU_OPTION_chardev:
3088 opts = qemu_opts_parse(&qemu_chardev_opts, optarg, 1);
3089 if (!opts) {
3090 exit(1);
3092 break;
3093 #ifdef CONFIG_LINUX
3094 case QEMU_OPTION_fsdev:
3095 opts = qemu_opts_parse(&qemu_fsdev_opts, optarg, 1);
3096 if (!opts) {
3097 fprintf(stderr, "parse error: %s\n", optarg);
3098 exit(1);
3100 break;
3101 case QEMU_OPTION_virtfs: {
3102 char *arg_fsdev = NULL;
3103 char *arg_9p = NULL;
3104 int len = 0;
3106 opts = qemu_opts_parse(&qemu_virtfs_opts, optarg, 1);
3107 if (!opts) {
3108 fprintf(stderr, "parse error: %s\n", optarg);
3109 exit(1);
3112 len = strlen(",id=,path=");
3113 len += strlen(qemu_opt_get(opts, "fstype"));
3114 len += strlen(qemu_opt_get(opts, "mount_tag"));
3115 len += strlen(qemu_opt_get(opts, "path"));
3116 arg_fsdev = qemu_malloc((len + 1) * sizeof(*arg_fsdev));
3118 if (!arg_fsdev) {
3119 fprintf(stderr, "No memory to parse -fsdev for %s\n",
3120 optarg);
3121 exit(1);
3124 sprintf(arg_fsdev, "%s,id=%s,path=%s",
3125 qemu_opt_get(opts, "fstype"),
3126 qemu_opt_get(opts, "mount_tag"),
3127 qemu_opt_get(opts, "path"));
3129 len = strlen("virtio-9p-pci,fsdev=,mount_tag=");
3130 len += 2*strlen(qemu_opt_get(opts, "mount_tag"));
3131 arg_9p = qemu_malloc((len + 1) * sizeof(*arg_9p));
3133 if (!arg_9p) {
3134 fprintf(stderr, "No memory to parse -device for %s\n",
3135 optarg);
3136 exit(1);
3139 sprintf(arg_9p, "virtio-9p-pci,fsdev=%s,mount_tag=%s",
3140 qemu_opt_get(opts, "mount_tag"),
3141 qemu_opt_get(opts, "mount_tag"));
3143 if (!qemu_opts_parse(&qemu_fsdev_opts, arg_fsdev, 1)) {
3144 fprintf(stderr, "parse error [fsdev]: %s\n", optarg);
3145 exit(1);
3148 if (!qemu_opts_parse(&qemu_device_opts, arg_9p, 1)) {
3149 fprintf(stderr, "parse error [device]: %s\n", optarg);
3150 exit(1);
3153 qemu_free(arg_fsdev);
3154 qemu_free(arg_9p);
3155 break;
3157 #endif
3158 case QEMU_OPTION_serial:
3159 add_device_config(DEV_SERIAL, optarg);
3160 default_serial = 0;
3161 if (strncmp(optarg, "mon:", 4) == 0) {
3162 default_monitor = 0;
3164 break;
3165 case QEMU_OPTION_watchdog:
3166 if (watchdog) {
3167 fprintf(stderr,
3168 "qemu: only one watchdog option may be given\n");
3169 return 1;
3171 watchdog = optarg;
3172 break;
3173 case QEMU_OPTION_watchdog_action:
3174 if (select_watchdog_action(optarg) == -1) {
3175 fprintf(stderr, "Unknown -watchdog-action parameter\n");
3176 exit(1);
3178 break;
3179 case QEMU_OPTION_virtiocon:
3180 add_device_config(DEV_VIRTCON, optarg);
3181 default_virtcon = 0;
3182 if (strncmp(optarg, "mon:", 4) == 0) {
3183 default_monitor = 0;
3185 break;
3186 case QEMU_OPTION_parallel:
3187 add_device_config(DEV_PARALLEL, optarg);
3188 default_parallel = 0;
3189 if (strncmp(optarg, "mon:", 4) == 0) {
3190 default_monitor = 0;
3192 break;
3193 case QEMU_OPTION_debugcon:
3194 add_device_config(DEV_DEBUGCON, optarg);
3195 break;
3196 case QEMU_OPTION_loadvm:
3197 loadvm = optarg;
3198 break;
3199 case QEMU_OPTION_full_screen:
3200 full_screen = 1;
3201 break;
3202 #ifdef CONFIG_SDL
3203 case QEMU_OPTION_no_frame:
3204 no_frame = 1;
3205 break;
3206 case QEMU_OPTION_alt_grab:
3207 alt_grab = 1;
3208 break;
3209 case QEMU_OPTION_ctrl_grab:
3210 ctrl_grab = 1;
3211 break;
3212 case QEMU_OPTION_no_quit:
3213 no_quit = 1;
3214 break;
3215 case QEMU_OPTION_sdl:
3216 display_type = DT_SDL;
3217 break;
3218 #endif
3219 case QEMU_OPTION_pidfile:
3220 pid_file = optarg;
3221 break;
3222 case QEMU_OPTION_win2k_hack:
3223 win2k_install_hack = 1;
3224 break;
3225 case QEMU_OPTION_rtc_td_hack:
3226 rtc_td_hack = 1;
3227 break;
3228 case QEMU_OPTION_acpitable:
3229 do_acpitable_option(optarg);
3230 break;
3231 case QEMU_OPTION_smbios:
3232 do_smbios_option(optarg);
3233 break;
3234 case QEMU_OPTION_enable_kvm:
3235 kvm_allowed = 1;
3236 break;
3237 case QEMU_OPTION_usb:
3238 usb_enabled = 1;
3239 break;
3240 case QEMU_OPTION_usbdevice:
3241 usb_enabled = 1;
3242 add_device_config(DEV_USB, optarg);
3243 break;
3244 case QEMU_OPTION_device:
3245 if (!qemu_opts_parse(&qemu_device_opts, optarg, 1)) {
3246 exit(1);
3248 break;
3249 case QEMU_OPTION_smp:
3250 smp_parse(optarg);
3251 if (smp_cpus < 1) {
3252 fprintf(stderr, "Invalid number of CPUs\n");
3253 exit(1);
3255 if (max_cpus < smp_cpus) {
3256 fprintf(stderr, "maxcpus must be equal to or greater than "
3257 "smp\n");
3258 exit(1);
3260 if (max_cpus > 255) {
3261 fprintf(stderr, "Unsupported number of maxcpus\n");
3262 exit(1);
3264 break;
3265 case QEMU_OPTION_vnc:
3266 display_type = DT_VNC;
3267 vnc_display = optarg;
3268 break;
3269 case QEMU_OPTION_no_acpi:
3270 acpi_enabled = 0;
3271 break;
3272 case QEMU_OPTION_no_hpet:
3273 no_hpet = 1;
3274 break;
3275 case QEMU_OPTION_balloon:
3276 if (balloon_parse(optarg) < 0) {
3277 fprintf(stderr, "Unknown -balloon argument %s\n", optarg);
3278 exit(1);
3280 break;
3281 case QEMU_OPTION_no_reboot:
3282 no_reboot = 1;
3283 break;
3284 case QEMU_OPTION_no_shutdown:
3285 no_shutdown = 1;
3286 break;
3287 case QEMU_OPTION_show_cursor:
3288 cursor_hide = 0;
3289 break;
3290 case QEMU_OPTION_uuid:
3291 if(qemu_uuid_parse(optarg, qemu_uuid) < 0) {
3292 fprintf(stderr, "Fail to parse UUID string."
3293 " Wrong format.\n");
3294 exit(1);
3296 break;
3297 #ifndef _WIN32
3298 case QEMU_OPTION_daemonize:
3299 daemonize = 1;
3300 break;
3301 #endif
3302 case QEMU_OPTION_option_rom:
3303 if (nb_option_roms >= MAX_OPTION_ROMS) {
3304 fprintf(stderr, "Too many option ROMs\n");
3305 exit(1);
3307 option_rom[nb_option_roms] = optarg;
3308 nb_option_roms++;
3309 break;
3310 case QEMU_OPTION_semihosting:
3311 semihosting_enabled = 1;
3312 break;
3313 case QEMU_OPTION_name:
3314 qemu_name = qemu_strdup(optarg);
3316 char *p = strchr(qemu_name, ',');
3317 if (p != NULL) {
3318 *p++ = 0;
3319 if (strncmp(p, "process=", 8)) {
3320 fprintf(stderr, "Unknown subargument %s to -name", p);
3321 exit(1);
3323 p += 8;
3324 set_proc_name(p);
3327 break;
3328 case QEMU_OPTION_prom_env:
3329 if (nb_prom_envs >= MAX_PROM_ENVS) {
3330 fprintf(stderr, "Too many prom variables\n");
3331 exit(1);
3333 prom_envs[nb_prom_envs] = optarg;
3334 nb_prom_envs++;
3335 break;
3336 case QEMU_OPTION_old_param:
3337 old_param = 1;
3338 break;
3339 case QEMU_OPTION_clock:
3340 configure_alarms(optarg);
3341 break;
3342 case QEMU_OPTION_startdate:
3343 configure_rtc_date_offset(optarg, 1);
3344 break;
3345 case QEMU_OPTION_rtc:
3346 opts = qemu_opts_parse(&qemu_rtc_opts, optarg, 0);
3347 if (!opts) {
3348 exit(1);
3350 configure_rtc(opts);
3351 break;
3352 case QEMU_OPTION_tb_size:
3353 tb_size = strtol(optarg, NULL, 0);
3354 if (tb_size < 0)
3355 tb_size = 0;
3356 break;
3357 case QEMU_OPTION_icount:
3358 icount_option = optarg;
3359 break;
3360 case QEMU_OPTION_incoming:
3361 incoming = optarg;
3362 break;
3363 case QEMU_OPTION_nodefaults:
3364 default_serial = 0;
3365 default_parallel = 0;
3366 default_virtcon = 0;
3367 default_monitor = 0;
3368 default_vga = 0;
3369 default_net = 0;
3370 default_floppy = 0;
3371 default_cdrom = 0;
3372 default_sdcard = 0;
3373 break;
3374 #ifndef _WIN32
3375 case QEMU_OPTION_chroot:
3376 chroot_dir = optarg;
3377 break;
3378 case QEMU_OPTION_runas:
3379 run_as = optarg;
3380 break;
3381 #endif
3382 case QEMU_OPTION_xen_domid:
3383 if (!(xen_available())) {
3384 printf("Option %s not supported for this target\n", popt->name);
3385 exit(1);
3387 xen_domid = atoi(optarg);
3388 break;
3389 case QEMU_OPTION_xen_create:
3390 if (!(xen_available())) {
3391 printf("Option %s not supported for this target\n", popt->name);
3392 exit(1);
3394 xen_mode = XEN_CREATE;
3395 break;
3396 case QEMU_OPTION_xen_attach:
3397 if (!(xen_available())) {
3398 printf("Option %s not supported for this target\n", popt->name);
3399 exit(1);
3401 xen_mode = XEN_ATTACH;
3402 break;
3403 case QEMU_OPTION_readconfig:
3405 int ret = qemu_read_config_file(optarg);
3406 if (ret < 0) {
3407 fprintf(stderr, "read config %s: %s\n", optarg,
3408 strerror(-ret));
3409 exit(1);
3411 break;
3413 case QEMU_OPTION_writeconfig:
3415 FILE *fp;
3416 if (strcmp(optarg, "-") == 0) {
3417 fp = stdout;
3418 } else {
3419 fp = fopen(optarg, "w");
3420 if (fp == NULL) {
3421 fprintf(stderr, "open %s: %s\n", optarg, strerror(errno));
3422 exit(1);
3425 qemu_config_write(fp);
3426 fclose(fp);
3427 break;
3432 loc_set_none();
3434 /* If no data_dir is specified then try to find it relative to the
3435 executable path. */
3436 if (!data_dir) {
3437 data_dir = find_datadir(argv[0]);
3439 /* If all else fails use the install patch specified when building. */
3440 if (!data_dir) {
3441 data_dir = CONFIG_QEMU_SHAREDIR;
3445 * Default to max_cpus = smp_cpus, in case the user doesn't
3446 * specify a max_cpus value.
3448 if (!max_cpus)
3449 max_cpus = smp_cpus;
3451 machine->max_cpus = machine->max_cpus ?: 1; /* Default to UP */
3452 if (smp_cpus > machine->max_cpus) {
3453 fprintf(stderr, "Number of SMP cpus requested (%d), exceeds max cpus "
3454 "supported by machine `%s' (%d)\n", smp_cpus, machine->name,
3455 machine->max_cpus);
3456 exit(1);
3459 qemu_opts_foreach(&qemu_device_opts, default_driver_check, NULL, 0);
3460 qemu_opts_foreach(&qemu_global_opts, default_driver_check, NULL, 0);
3462 if (machine->no_serial) {
3463 default_serial = 0;
3465 if (machine->no_parallel) {
3466 default_parallel = 0;
3468 if (!machine->use_virtcon) {
3469 default_virtcon = 0;
3471 if (machine->no_vga) {
3472 default_vga = 0;
3474 if (machine->no_floppy) {
3475 default_floppy = 0;
3477 if (machine->no_cdrom) {
3478 default_cdrom = 0;
3480 if (machine->no_sdcard) {
3481 default_sdcard = 0;
3484 if (display_type == DT_NOGRAPHIC) {
3485 if (default_parallel)
3486 add_device_config(DEV_PARALLEL, "null");
3487 if (default_serial && default_monitor) {
3488 add_device_config(DEV_SERIAL, "mon:stdio");
3489 } else if (default_virtcon && default_monitor) {
3490 add_device_config(DEV_VIRTCON, "mon:stdio");
3491 } else {
3492 if (default_serial)
3493 add_device_config(DEV_SERIAL, "stdio");
3494 if (default_virtcon)
3495 add_device_config(DEV_VIRTCON, "stdio");
3496 if (default_monitor)
3497 monitor_parse("stdio", "readline");
3499 } else {
3500 if (default_serial)
3501 add_device_config(DEV_SERIAL, "vc:80Cx24C");
3502 if (default_parallel)
3503 add_device_config(DEV_PARALLEL, "vc:80Cx24C");
3504 if (default_monitor)
3505 monitor_parse("vc:80Cx24C", "readline");
3506 if (default_virtcon)
3507 add_device_config(DEV_VIRTCON, "vc:80Cx24C");
3509 if (default_vga)
3510 vga_interface_type = VGA_CIRRUS;
3512 if (qemu_opts_foreach(&qemu_chardev_opts, chardev_init_func, NULL, 1) != 0)
3513 exit(1);
3514 #ifdef CONFIG_LINUX
3515 if (qemu_opts_foreach(&qemu_fsdev_opts, fsdev_init_func, NULL, 1) != 0) {
3516 exit(1);
3518 #endif
3520 #ifndef _WIN32
3521 if (daemonize) {
3522 pid_t pid;
3524 if (pipe(fds) == -1)
3525 exit(1);
3527 pid = fork();
3528 if (pid > 0) {
3529 uint8_t status;
3530 ssize_t len;
3532 close(fds[1]);
3534 again:
3535 len = read(fds[0], &status, 1);
3536 if (len == -1 && (errno == EINTR))
3537 goto again;
3539 if (len != 1)
3540 exit(1);
3541 else if (status == 1) {
3542 fprintf(stderr, "Could not acquire pidfile: %s\n", strerror(errno));
3543 exit(1);
3544 } else
3545 exit(0);
3546 } else if (pid < 0)
3547 exit(1);
3549 close(fds[0]);
3550 qemu_set_cloexec(fds[1]);
3552 setsid();
3554 pid = fork();
3555 if (pid > 0)
3556 exit(0);
3557 else if (pid < 0)
3558 exit(1);
3560 umask(027);
3562 signal(SIGTSTP, SIG_IGN);
3563 signal(SIGTTOU, SIG_IGN);
3564 signal(SIGTTIN, SIG_IGN);
3566 #endif
3568 if (pid_file && qemu_create_pidfile(pid_file) != 0) {
3569 #ifndef _WIN32
3570 if (daemonize) {
3571 uint8_t status = 1;
3572 if (write(fds[1], &status, 1) != 1) {
3573 perror("daemonize. Writing to pipe\n");
3575 } else
3576 #endif
3577 fprintf(stderr, "Could not acquire pid file: %s\n", strerror(errno));
3578 exit(1);
3581 if (kvm_allowed) {
3582 int ret = kvm_init(smp_cpus);
3583 if (ret < 0) {
3584 if (!kvm_available()) {
3585 printf("KVM not supported for this target\n");
3586 } else {
3587 fprintf(stderr, "failed to initialize KVM: %s\n", strerror(-ret));
3589 exit(1);
3593 if (qemu_init_main_loop()) {
3594 fprintf(stderr, "qemu_init_main_loop failed\n");
3595 exit(1);
3597 linux_boot = (kernel_filename != NULL);
3599 if (!linux_boot && *kernel_cmdline != '\0') {
3600 fprintf(stderr, "-append only allowed with -kernel option\n");
3601 exit(1);
3604 if (!linux_boot && initrd_filename != NULL) {
3605 fprintf(stderr, "-initrd only allowed with -kernel option\n");
3606 exit(1);
3609 #ifndef _WIN32
3610 /* Win32 doesn't support line-buffering and requires size >= 2 */
3611 setvbuf(stdout, NULL, _IOLBF, 0);
3612 #endif
3614 if (init_timer_alarm() < 0) {
3615 fprintf(stderr, "could not initialize alarm timer\n");
3616 exit(1);
3618 configure_icount(icount_option);
3620 socket_init();
3622 if (net_init_clients() < 0) {
3623 exit(1);
3626 /* init the bluetooth world */
3627 if (foreach_device_config(DEV_BT, bt_parse))
3628 exit(1);
3630 /* init the memory */
3631 if (ram_size == 0)
3632 ram_size = DEFAULT_RAM_SIZE * 1024 * 1024;
3634 /* init the dynamic translator */
3635 cpu_exec_init_all(tb_size * 1024 * 1024);
3637 bdrv_init_with_whitelist();
3639 blk_mig_init();
3641 if (default_cdrom) {
3642 /* we always create the cdrom drive, even if no disk is there */
3643 drive_add(NULL, CDROM_ALIAS);
3646 if (default_floppy) {
3647 /* we always create at least one floppy */
3648 drive_add(NULL, FD_ALIAS, 0);
3651 if (default_sdcard) {
3652 /* we always create one sd slot, even if no card is in it */
3653 drive_add(NULL, SD_ALIAS);
3656 /* open the virtual block devices */
3657 if (snapshot)
3658 qemu_opts_foreach(&qemu_drive_opts, drive_enable_snapshot, NULL, 0);
3659 if (qemu_opts_foreach(&qemu_drive_opts, drive_init_func, machine, 1) != 0)
3660 exit(1);
3662 register_savevm_live("ram", 0, 3, NULL, ram_save_live, NULL,
3663 ram_load, NULL);
3665 if (nb_numa_nodes > 0) {
3666 int i;
3668 if (nb_numa_nodes > smp_cpus) {
3669 nb_numa_nodes = smp_cpus;
3672 /* If no memory size if given for any node, assume the default case
3673 * and distribute the available memory equally across all nodes
3675 for (i = 0; i < nb_numa_nodes; i++) {
3676 if (node_mem[i] != 0)
3677 break;
3679 if (i == nb_numa_nodes) {
3680 uint64_t usedmem = 0;
3682 /* On Linux, the each node's border has to be 8MB aligned,
3683 * the final node gets the rest.
3685 for (i = 0; i < nb_numa_nodes - 1; i++) {
3686 node_mem[i] = (ram_size / nb_numa_nodes) & ~((1 << 23UL) - 1);
3687 usedmem += node_mem[i];
3689 node_mem[i] = ram_size - usedmem;
3692 for (i = 0; i < nb_numa_nodes; i++) {
3693 if (node_cpumask[i] != 0)
3694 break;
3696 /* assigning the VCPUs round-robin is easier to implement, guest OSes
3697 * must cope with this anyway, because there are BIOSes out there in
3698 * real machines which also use this scheme.
3700 if (i == nb_numa_nodes) {
3701 for (i = 0; i < smp_cpus; i++) {
3702 node_cpumask[i % nb_numa_nodes] |= 1 << i;
3707 if (qemu_opts_foreach(&qemu_mon_opts, mon_init_func, NULL, 1) != 0) {
3708 exit(1);
3711 if (foreach_device_config(DEV_SERIAL, serial_parse) < 0)
3712 exit(1);
3713 if (foreach_device_config(DEV_PARALLEL, parallel_parse) < 0)
3714 exit(1);
3715 if (foreach_device_config(DEV_VIRTCON, virtcon_parse) < 0)
3716 exit(1);
3717 if (foreach_device_config(DEV_DEBUGCON, debugcon_parse) < 0)
3718 exit(1);
3720 module_call_init(MODULE_INIT_DEVICE);
3722 if (qemu_opts_foreach(&qemu_device_opts, device_help_func, NULL, 0) != 0)
3723 exit(0);
3725 if (watchdog) {
3726 i = select_watchdog(watchdog);
3727 if (i > 0)
3728 exit (i == 1 ? 1 : 0);
3731 if (machine->compat_props) {
3732 qdev_prop_register_global_list(machine->compat_props);
3734 qemu_add_globals();
3736 machine->init(ram_size, boot_devices,
3737 kernel_filename, kernel_cmdline, initrd_filename, cpu_model);
3739 cpu_synchronize_all_post_init();
3741 #ifndef _WIN32
3742 /* must be after terminal init, SDL library changes signal handlers */
3743 sighandler_setup();
3744 #endif
3746 set_numa_modes();
3748 current_machine = machine;
3750 /* init USB devices */
3751 if (usb_enabled) {
3752 if (foreach_device_config(DEV_USB, usb_parse) < 0)
3753 exit(1);
3756 /* init generic devices */
3757 if (qemu_opts_foreach(&qemu_device_opts, device_init_func, NULL, 1) != 0)
3758 exit(1);
3760 net_check_clients();
3762 /* just use the first displaystate for the moment */
3763 ds = get_displaystate();
3765 if (display_type == DT_DEFAULT) {
3766 #if defined(CONFIG_SDL) || defined(CONFIG_COCOA)
3767 display_type = DT_SDL;
3768 #else
3769 display_type = DT_VNC;
3770 vnc_display = "localhost:0,to=99";
3771 show_vnc_port = 1;
3772 #endif
3776 switch (display_type) {
3777 case DT_NOGRAPHIC:
3778 break;
3779 #if defined(CONFIG_CURSES)
3780 case DT_CURSES:
3781 curses_display_init(ds, full_screen);
3782 break;
3783 #endif
3784 #if defined(CONFIG_SDL)
3785 case DT_SDL:
3786 sdl_display_init(ds, full_screen, no_frame);
3787 break;
3788 #elif defined(CONFIG_COCOA)
3789 case DT_SDL:
3790 cocoa_display_init(ds, full_screen);
3791 break;
3792 #endif
3793 case DT_VNC:
3794 vnc_display_init(ds);
3795 if (vnc_display_open(ds, vnc_display) < 0)
3796 exit(1);
3798 if (show_vnc_port) {
3799 printf("VNC server running on `%s'\n", vnc_display_local_addr(ds));
3801 break;
3802 default:
3803 break;
3805 dpy_resize(ds);
3807 dcl = ds->listeners;
3808 while (dcl != NULL) {
3809 if (dcl->dpy_refresh != NULL) {
3810 ds->gui_timer = qemu_new_timer(rt_clock, gui_update, ds);
3811 qemu_mod_timer(ds->gui_timer, qemu_get_clock(rt_clock));
3813 dcl = dcl->next;
3816 if (display_type == DT_NOGRAPHIC || display_type == DT_VNC) {
3817 nographic_timer = qemu_new_timer(rt_clock, nographic_update, NULL);
3818 qemu_mod_timer(nographic_timer, qemu_get_clock(rt_clock));
3821 text_consoles_set_display(ds);
3823 if (gdbstub_dev && gdbserver_start(gdbstub_dev) < 0) {
3824 fprintf(stderr, "qemu: could not open gdbserver on device '%s'\n",
3825 gdbstub_dev);
3826 exit(1);
3829 qdev_machine_creation_done();
3831 if (rom_load_all() != 0) {
3832 fprintf(stderr, "rom loading failed\n");
3833 exit(1);
3836 qemu_system_reset();
3837 if (loadvm) {
3838 if (load_vmstate(loadvm) < 0) {
3839 autostart = 0;
3843 if (incoming) {
3844 qemu_start_incoming_migration(incoming);
3845 } else if (autostart) {
3846 vm_start();
3849 #ifndef _WIN32
3850 if (daemonize) {
3851 uint8_t status = 0;
3852 ssize_t len;
3854 again1:
3855 len = write(fds[1], &status, 1);
3856 if (len == -1 && (errno == EINTR))
3857 goto again1;
3859 if (len != 1)
3860 exit(1);
3862 if (chdir("/")) {
3863 perror("not able to chdir to /");
3864 exit(1);
3866 TFR(fd = qemu_open("/dev/null", O_RDWR));
3867 if (fd == -1)
3868 exit(1);
3871 if (run_as) {
3872 pwd = getpwnam(run_as);
3873 if (!pwd) {
3874 fprintf(stderr, "User \"%s\" doesn't exist\n", run_as);
3875 exit(1);
3879 if (chroot_dir) {
3880 if (chroot(chroot_dir) < 0) {
3881 fprintf(stderr, "chroot failed\n");
3882 exit(1);
3884 if (chdir("/")) {
3885 perror("not able to chdir to /");
3886 exit(1);
3890 if (run_as) {
3891 if (setgid(pwd->pw_gid) < 0) {
3892 fprintf(stderr, "Failed to setgid(%d)\n", pwd->pw_gid);
3893 exit(1);
3895 if (setuid(pwd->pw_uid) < 0) {
3896 fprintf(stderr, "Failed to setuid(%d)\n", pwd->pw_uid);
3897 exit(1);
3899 if (setuid(0) != -1) {
3900 fprintf(stderr, "Dropping privileges failed\n");
3901 exit(1);
3905 if (daemonize) {
3906 dup2(fd, 0);
3907 dup2(fd, 1);
3908 dup2(fd, 2);
3910 close(fd);
3912 #endif
3914 main_loop();
3915 quit_timers();
3916 net_cleanup();
3918 return 0;