memory.h

   1 /*
   2  * Physical memory management API
   3  *
   4  * Copyright 2011 Red Hat, Inc. and/or its affiliates
   5  *
   6  * Authors:
   7  *  Avi Kivity <avi@redhat.com>
   8  *
   9  * This work is licensed under the terms of the GNU GPL, version 2.  See
  10  * the COPYING file in the top-level directory.
  11  *
  12  */
  13
  14 #ifndef MEMORY_H
  15 #define MEMORY_H
  16
  17 #ifndef CONFIG_USER_ONLY
  18
  19 #include <stdint.h>
  20 #include <stdbool.h>
  21 #include "qemu-common.h"
  22 #include "cpu-common.h"
  23 #include "targphys.h"
  24 #include "qemu-queue.h"
  25 #include "iorange.h"
  26 #include "ioport.h"
  27 #include "int128.h"
  28
  29 typedef struct MemoryRegionOps MemoryRegionOps;
  30 typedef struct MemoryRegion MemoryRegion;
  31 typedef struct MemoryRegionPortio MemoryRegionPortio;
  32 typedef struct MemoryRegionMmio MemoryRegionMmio;
  33
  34 /* Must match *_DIRTY_FLAGS in cpu-all.h.  To be replaced with dynamic
  35  * registration.
  36  */
  37 #define DIRTY_MEMORY_VGA       0
  38 #define DIRTY_MEMORY_CODE      1
  39 #define DIRTY_MEMORY_MIGRATION 3
  40
  41 struct MemoryRegionMmio {
  42     CPUReadMemoryFunc *read[3];
  43     CPUWriteMemoryFunc *write[3];
  44 };
  45
  46 /* Internal use; thunks between old-style IORange and MemoryRegions. */
  47 typedef struct MemoryRegionIORange MemoryRegionIORange;
  48 struct MemoryRegionIORange {
  49     IORange iorange;
  50     MemoryRegion *mr;
  51     target_phys_addr_t offset;
  52 };
  53
  54 /*
  55  * Memory region callbacks
  56  */
  57 struct MemoryRegionOps {
  58     /* Read from the memory region. @addr is relative to @mr; @size is
  59      * in bytes. */
  60     uint64_t (*read)(void *opaque,
  61                      target_phys_addr_t addr,
  62                      unsigned size);
  63     /* Write to the memory region. @addr is relative to @mr; @size is
  64      * in bytes. */
  65     void (*write)(void *opaque,
  66                   target_phys_addr_t addr,
  67                   uint64_t data,
  68                   unsigned size);
  69
  70     enum device_endian endianness;
  71     /* Guest-visible constraints: */
  72     struct {
  73         /* If nonzero, specify bounds on access sizes beyond which a machine
  74          * check is thrown.
  75          */
  76         unsigned min_access_size;
  77         unsigned max_access_size;
  78         /* If true, unaligned accesses are supported.  Otherwise unaligned
  79          * accesses throw machine checks.
  80          */
  81          bool unaligned;
  82         /*
  83          * If present, and returns #false, the transaction is not accepted
  84          * by the device (and results in machine dependent behaviour such
  85          * as a machine check exception).
  86          */
  87         bool (*accepts)(void *opaque, target_phys_addr_t addr,
  88                         unsigned size, bool is_write);
  89     } valid;
  90     /* Internal implementation constraints: */
  91     struct {
  92         /* If nonzero, specifies the minimum size implemented.  Smaller sizes
  93          * will be rounded upwards and a partial result will be returned.
  94          */
  95         unsigned min_access_size;
  96         /* If nonzero, specifies the maximum size implemented.  Larger sizes
  97          * will be done as a series of accesses with smaller sizes.
  98          */
  99         unsigned max_access_size;
 100         /* If true, unaligned accesses are supported.  Otherwise all accesses
 101          * are converted to (possibly multiple) naturally aligned accesses.
 102          */
 103          bool unaligned;
 104     } impl;
 105
 106     /* If .read and .write are not present, old_portio may be used for
 107      * backwards compatibility with old portio registration
 108      */
 109     const MemoryRegionPortio *old_portio;
 110     /* If .read and .write are not present, old_mmio may be used for
 111      * backwards compatibility with old mmio registration
 112      */
 113     const MemoryRegionMmio old_mmio;
 114 };
 115
 116 typedef struct CoalescedMemoryRange CoalescedMemoryRange;
 117 typedef struct MemoryRegionIoeventfd MemoryRegionIoeventfd;
 118
 119 struct MemoryRegion {
 120     /* All fields are private - violators will be prosecuted */
 121     const MemoryRegionOps *ops;
 122     void *opaque;
 123     MemoryRegion *parent;
 124     Int128 size;
 125     target_phys_addr_t addr;
 126     void (*destructor)(MemoryRegion *mr);
 127     ram_addr_t ram_addr;
 128     bool subpage;
 129     bool terminates;
 130     bool readable;
 131     bool ram;
 132     bool readonly; /* For RAM regions */
 133     bool enabled;
 134     bool rom_device;
 135     bool warning_printed; /* For reservations */
 136     MemoryRegion *alias;
 137     target_phys_addr_t alias_offset;
 138     unsigned priority;
 139     bool may_overlap;
 140     QTAILQ_HEAD(subregions, MemoryRegion) subregions;
 141     QTAILQ_ENTRY(MemoryRegion) subregions_link;
 142     QTAILQ_HEAD(coalesced_ranges, CoalescedMemoryRange) coalesced;
 143     const char *name;
 144     uint8_t dirty_log_mask;
 145     unsigned ioeventfd_nb;
 146     MemoryRegionIoeventfd *ioeventfds;
 147 };
 148
 149 struct MemoryRegionPortio {
 150     uint32_t offset;
 151     uint32_t len;
 152     unsigned size;
 153     IOPortReadFunc *read;
 154     IOPortWriteFunc *write;
 155 };
 156
 157 #define PORTIO_END_OF_LIST() { }
 158
 159 typedef struct MemoryRegionSection MemoryRegionSection;
 160
 161 /**
 162  * MemoryRegionSection: describes a fragment of a #MemoryRegion
 163  *
 164  * @mr: the region, or %NULL if empty
 165  * @address_space: the address space the region is mapped in
 166  * @offset_within_region: the beginning of the section, relative to @mr's start
 167  * @size: the size of the section; will not exceed @mr's boundaries
 168  * @offset_within_address_space: the address of the first byte of the section
 169  *     relative to the region's address space
 170  * @readonly: writes to this section are ignored
 171  */
 172 struct MemoryRegionSection {
 173     MemoryRegion *mr;
 174     MemoryRegion *address_space;
 175     target_phys_addr_t offset_within_region;
 176     uint64_t size;
 177     target_phys_addr_t offset_within_address_space;
 178     bool readonly;
 179 };
 180
 181 typedef struct MemoryListener MemoryListener;
 182
 183 /**
 184  * MemoryListener: callbacks structure for updates to the physical memory map
 185  *
 186  * Allows a component to adjust to changes in the guest-visible memory map.
 187  * Use with memory_listener_register() and memory_listener_unregister().
 188  */
 189 struct MemoryListener {
 190     void (*begin)(MemoryListener *listener);
 191     void (*commit)(MemoryListener *listener);
 192     void (*region_add)(MemoryListener *listener, MemoryRegionSection *section);
 193     void (*region_del)(MemoryListener *listener, MemoryRegionSection *section);
 194     void (*region_nop)(MemoryListener *listener, MemoryRegionSection *section);
 195     void (*log_start)(MemoryListener *listener, MemoryRegionSection *section);
 196     void (*log_stop)(MemoryListener *listener, MemoryRegionSection *section);
 197     void (*log_sync)(MemoryListener *listener, MemoryRegionSection *section);
 198     void (*log_global_start)(MemoryListener *listener);
 199     void (*log_global_stop)(MemoryListener *listener);
 200     void (*eventfd_add)(MemoryListener *listener, MemoryRegionSection *section,
 201                         bool match_data, uint64_t data, int fd);
 202     void (*eventfd_del)(MemoryListener *listener, MemoryRegionSection *section,
 203                         bool match_data, uint64_t data, int fd);
 204     /* Lower = earlier (during add), later (during del) */
 205     unsigned priority;
 206     MemoryRegion *address_space_filter;
 207     QTAILQ_ENTRY(MemoryListener) link;
 208 };
 209
 210 /**
 211  * memory_region_init: Initialize a memory region
 212  *
 213  * The region typically acts as a container for other memory regions.  Use
 214  * memory_region_add_subregion() to add subregions.
 215  *
 216  * @mr: the #MemoryRegion to be initialized
 217  * @name: used for debugging; not visible to the user or ABI
 218  * @size: size of the region; any subregions beyond this size will be clipped
 219  */
 220 void memory_region_init(MemoryRegion *mr,
 221                         const char *name,
 222                         uint64_t size);
 223 /**
 224  * memory_region_init_io: Initialize an I/O memory region.
 225  *
 226  * Accesses into the region will cause the callbacks in @ops to be called.
 227  * if @size is nonzero, subregions will be clipped to @size.
 228  *
 229  * @mr: the #MemoryRegion to be initialized.
 230  * @ops: a structure containing read and write callbacks to be used when
 231  *       I/O is performed on the region.
 232  * @opaque: passed to to the read and write callbacks of the @ops structure.
 233  * @name: used for debugging; not visible to the user or ABI
 234  * @size: size of the region.
 235  */
 236 void memory_region_init_io(MemoryRegion *mr,
 237                            const MemoryRegionOps *ops,
 238                            void *opaque,
 239                            const char *name,
 240                            uint64_t size);
 241
 242 /**
 243  * memory_region_init_ram:  Initialize RAM memory region.  Accesses into the
 244  *                          region will modify memory directly.
 245  *
 246  * @mr: the #MemoryRegion to be initialized.
 247  * @name: the name of the region.
 248  * @size: size of the region.
 249  */
 250 void memory_region_init_ram(MemoryRegion *mr,
 251                             const char *name,
 252                             uint64_t size);
 253
 254 /**
 255  * memory_region_init_ram:  Initialize RAM memory region from a user-provided.
 256  *                          pointer.  Accesses into the region will modify
 257  *                          memory directly.
 258  *
 259  * @mr: the #MemoryRegion to be initialized.
 260  * @name: the name of the region.
 261  * @size: size of the region.
 262  * @ptr: memory to be mapped; must contain at least @size bytes.
 263  */
 264 void memory_region_init_ram_ptr(MemoryRegion *mr,
 265                                 const char *name,
 266                                 uint64_t size,
 267                                 void *ptr);
 268
 269 /**
 270  * memory_region_init_alias: Initialize a memory region that aliases all or a
 271  *                           part of another memory region.
 272  *
 273  * @mr: the #MemoryRegion to be initialized.
 274  * @name: used for debugging; not visible to the user or ABI
 275  * @orig: the region to be referenced; @mr will be equivalent to
 276  *        @orig between @offset and @offset + @size - 1.
 277  * @offset: start of the section in @orig to be referenced.
 278  * @size: size of the region.
 279  */
 280 void memory_region_init_alias(MemoryRegion *mr,
 281                               const char *name,
 282                               MemoryRegion *orig,
 283                               target_phys_addr_t offset,
 284                               uint64_t size);
 285
 286 /**
 287  * memory_region_init_rom_device:  Initialize a ROM memory region.  Writes are
 288  *                                 handled via callbacks.
 289  *
 290  * @mr: the #MemoryRegion to be initialized.
 291  * @ops: callbacks for write access handling.
 292  * @name: the name of the region.
 293  * @size: size of the region.
 294  */
 295 void memory_region_init_rom_device(MemoryRegion *mr,
 296                                    const MemoryRegionOps *ops,
 297                                    void *opaque,
 298                                    const char *name,
 299                                    uint64_t size);
 300
 301 /**
 302  * memory_region_init_reservation: Initialize a memory region that reserves
 303  *                                 I/O space.
 304  *
 305  * A reservation region primariy serves debugging purposes.  It claims I/O
 306  * space that is not supposed to be handled by QEMU itself.  Any access via
 307  * the memory API will cause an abort().
 308  *
 309  * @mr: the #MemoryRegion to be initialized
 310  * @name: used for debugging; not visible to the user or ABI
 311  * @size: size of the region.
 312  */
 313 void memory_region_init_reservation(MemoryRegion *mr,
 314                                     const char *name,
 315                                     uint64_t size);
 316 /**
 317  * memory_region_destroy: Destroy a memory region and reclaim all resources.
 318  *
 319  * @mr: the region to be destroyed.  May not currently be a subregion
 320  *      (see memory_region_add_subregion()) or referenced in an alias
 321  *      (see memory_region_init_alias()).
 322  */
 323 void memory_region_destroy(MemoryRegion *mr);
 324
 325 /**
 326  * memory_region_size: get a memory region's size.
 327  *
 328  * @mr: the memory region being queried.
 329  */
 330 uint64_t memory_region_size(MemoryRegion *mr);
 331
 332 /**
 333  * memory_region_is_ram: check whether a memory region is random access
 334  *
 335  * Returns %true is a memory region is random access.
 336  *
 337  * @mr: the memory region being queried
 338  */
 339 bool memory_region_is_ram(MemoryRegion *mr);
 340
 341 /**
 342  * memory_region_is_romd: check whether a memory region is ROMD
 343  *
 344  * Returns %true is a memory region is ROMD and currently set to allow
 345  * direct reads.
 346  *
 347  * @mr: the memory region being queried
 348  */
 349 static inline bool memory_region_is_romd(MemoryRegion *mr)
 350 {
 351     return mr->rom_device && mr->readable;
 352 }
 353
 354 /**
 355  * memory_region_name: get a memory region's name
 356  *
 357  * Returns the string that was used to initialize the memory region.
 358  *
 359  * @mr: the memory region being queried
 360  */
 361 const char *memory_region_name(MemoryRegion *mr);
 362
 363 /**
 364  * memory_region_is_logging: return whether a memory region is logging writes
 365  *
 366  * Returns %true if the memory region is logging writes
 367  *
 368  * @mr: the memory region being queried
 369  */
 370 bool memory_region_is_logging(MemoryRegion *mr);
 371
 372 /**
 373  * memory_region_is_rom: check whether a memory region is ROM
 374  *
 375  * Returns %true is a memory region is read-only memory.
 376  *
 377  * @mr: the memory region being queried
 378  */
 379 bool memory_region_is_rom(MemoryRegion *mr);
 380
 381 /**
 382  * memory_region_get_ram_ptr: Get a pointer into a RAM memory region.
 383  *
 384  * Returns a host pointer to a RAM memory region (created with
 385  * memory_region_init_ram() or memory_region_init_ram_ptr()).  Use with
 386  * care.
 387  *
 388  * @mr: the memory region being queried.
 389  */
 390 void *memory_region_get_ram_ptr(MemoryRegion *mr);
 391
 392 /**
 393  * memory_region_set_log: Turn dirty logging on or off for a region.
 394  *
 395  * Turns dirty logging on or off for a specified client (display, migration).
 396  * Only meaningful for RAM regions.
 397  *
 398  * @mr: the memory region being updated.
 399  * @log: whether dirty logging is to be enabled or disabled.
 400  * @client: the user of the logging information; %DIRTY_MEMORY_MIGRATION or
 401  *          %DIRTY_MEMORY_VGA.
 402  */
 403 void memory_region_set_log(MemoryRegion *mr, bool log, unsigned client);
 404
 405 /**
 406  * memory_region_get_dirty: Check whether a range of bytes is dirty
 407  *                          for a specified client.
 408  *
 409  * Checks whether a range of bytes has been written to since the last
 410  * call to memory_region_reset_dirty() with the same @client.  Dirty logging
 411  * must be enabled.
 412  *
 413  * @mr: the memory region being queried.
 414  * @addr: the address (relative to the start of the region) being queried.
 415  * @size: the size of the range being queried.
 416  * @client: the user of the logging information; %DIRTY_MEMORY_MIGRATION or
 417  *          %DIRTY_MEMORY_VGA.
 418  */
 419 bool memory_region_get_dirty(MemoryRegion *mr, target_phys_addr_t addr,
 420                              target_phys_addr_t size, unsigned client);
 421
 422 /**
 423  * memory_region_set_dirty: Mark a range of bytes as dirty in a memory region.
 424  *
 425  * Marks a range of bytes as dirty, after it has been dirtied outside
 426  * guest code.
 427  *
 428  * @mr: the memory region being dirtied.
 429  * @addr: the address (relative to the start of the region) being dirtied.
 430  * @size: size of the range being dirtied.
 431  */
 432 void memory_region_set_dirty(MemoryRegion *mr, target_phys_addr_t addr,
 433                              target_phys_addr_t size);
 434
 435 /**
 436  * memory_region_sync_dirty_bitmap: Synchronize a region's dirty bitmap with
 437  *                                  any external TLBs (e.g. kvm)
 438  *
 439  * Flushes dirty information from accelerators such as kvm and vhost-net
 440  * and makes it available to users of the memory API.
 441  *
 442  * @mr: the region being flushed.
 443  */
 444 void memory_region_sync_dirty_bitmap(MemoryRegion *mr);
 445
 446 /**
 447  * memory_region_reset_dirty: Mark a range of pages as clean, for a specified
 448  *                            client.
 449  *
 450  * Marks a range of pages as no longer dirty.
 451  *
 452  * @mr: the region being updated.
 453  * @addr: the start of the subrange being cleaned.
 454  * @size: the size of the subrange being cleaned.
 455  * @client: the user of the logging information; %DIRTY_MEMORY_MIGRATION or
 456  *          %DIRTY_MEMORY_VGA.
 457  */
 458 void memory_region_reset_dirty(MemoryRegion *mr, target_phys_addr_t addr,
 459                                target_phys_addr_t size, unsigned client);
 460
 461 /**
 462  * memory_region_set_readonly: Turn a memory region read-only (or read-write)
 463  *
 464  * Allows a memory region to be marked as read-only (turning it into a ROM).
 465  * only useful on RAM regions.
 466  *
 467  * @mr: the region being updated.
 468  * @readonly: whether rhe region is to be ROM or RAM.
 469  */
 470 void memory_region_set_readonly(MemoryRegion *mr, bool readonly);
 471
 472 /**
 473  * memory_region_rom_device_set_readable: enable/disable ROM readability
 474  *
 475  * Allows a ROM device (initialized with memory_region_init_rom_device() to
 476  * to be marked as readable (default) or not readable.  When it is readable,
 477  * the device is mapped to guest memory.  When not readable, reads are
 478  * forwarded to the #MemoryRegion.read function.
 479  *
 480  * @mr: the memory region to be updated
 481  * @readable: whether reads are satisified directly (%true) or via callbacks
 482  *            (%false)
 483  */
 484 void memory_region_rom_device_set_readable(MemoryRegion *mr, bool readable);
 485
 486 /**
 487  * memory_region_set_coalescing: Enable memory coalescing for the region.
 488  *
 489  * Enabled writes to a region to be queued for later processing. MMIO ->write
 490  * callbacks may be delayed until a non-coalesced MMIO is issued.
 491  * Only useful for IO regions.  Roughly similar to write-combining hardware.
 492  *
 493  * @mr: the memory region to be write coalesced
 494  */
 495 void memory_region_set_coalescing(MemoryRegion *mr);
 496
 497 /**
 498  * memory_region_add_coalescing: Enable memory coalescing for a sub-range of
 499  *                               a region.
 500  *
 501  * Like memory_region_set_coalescing(), but works on a sub-range of a region.
 502  * Multiple calls can be issued coalesced disjoint ranges.
 503  *
 504  * @mr: the memory region to be updated.
 505  * @offset: the start of the range within the region to be coalesced.
 506  * @size: the size of the subrange to be coalesced.
 507  */
 508 void memory_region_add_coalescing(MemoryRegion *mr,
 509                                   target_phys_addr_t offset,
 510                                   uint64_t size);
 511
 512 /**
 513  * memory_region_clear_coalescing: Disable MMIO coalescing for the region.
 514  *
 515  * Disables any coalescing caused by memory_region_set_coalescing() or
 516  * memory_region_add_coalescing().  Roughly equivalent to uncacheble memory
 517  * hardware.
 518  *
 519  * @mr: the memory region to be updated.
 520  */
 521 void memory_region_clear_coalescing(MemoryRegion *mr);
 522
 523 /**
 524  * memory_region_add_eventfd: Request an eventfd to be triggered when a word
 525  *                            is written to a location.
 526  *
 527  * Marks a word in an IO region (initialized with memory_region_init_io())
 528  * as a trigger for an eventfd event.  The I/O callback will not be called.
 529  * The caller must be prepared to handle failure (that is, take the required
 530  * action if the callback _is_ called).
 531  *
 532  * @mr: the memory region being updated.
 533  * @addr: the address within @mr that is to be monitored
 534  * @size: the size of the access to trigger the eventfd
 535  * @match_data: whether to match against @data, instead of just @addr
 536  * @data: the data to match against the guest write
 537  * @fd: the eventfd to be triggered when @addr, @size, and @data all match.
 538  **/
 539 void memory_region_add_eventfd(MemoryRegion *mr,
 540                                target_phys_addr_t addr,
 541                                unsigned size,
 542                                bool match_data,
 543                                uint64_t data,
 544                                int fd);
 545
 546 /**
 547  * memory_region_del_eventfd: Cancel an eventfd.
 548  *
 549  * Cancels an eventfd trigger requested by a previous
 550  * memory_region_add_eventfd() call.
 551  *
 552  * @mr: the memory region being updated.
 553  * @addr: the address within @mr that is to be monitored
 554  * @size: the size of the access to trigger the eventfd
 555  * @match_data: whether to match against @data, instead of just @addr
 556  * @data: the data to match against the guest write
 557  * @fd: the eventfd to be triggered when @addr, @size, and @data all match.
 558  */
 559 void memory_region_del_eventfd(MemoryRegion *mr,
 560                                target_phys_addr_t addr,
 561                                unsigned size,
 562                                bool match_data,
 563                                uint64_t data,
 564                                int fd);
 565 /**
 566  * memory_region_add_subregion: Add a subregion to a container.
 567  *
 568  * Adds a subregion at @offset.  The subregion may not overlap with other
 569  * subregions (except for those explicitly marked as overlapping).  A region
 570  * may only be added once as a subregion (unless removed with
 571  * memory_region_del_subregion()); use memory_region_init_alias() if you
 572  * want a region to be a subregion in multiple locations.
 573  *
 574  * @mr: the region to contain the new subregion; must be a container
 575  *      initialized with memory_region_init().
 576  * @offset: the offset relative to @mr where @subregion is added.
 577  * @subregion: the subregion to be added.
 578  */
 579 void memory_region_add_subregion(MemoryRegion *mr,
 580                                  target_phys_addr_t offset,
 581                                  MemoryRegion *subregion);
 582 /**
 583  * memory_region_add_subregion: Add a subregion to a container, with overlap.
 584  *
 585  * Adds a subregion at @offset.  The subregion may overlap with other
 586  * subregions.  Conflicts are resolved by having a higher @priority hide a
 587  * lower @priority. Subregions without priority are taken as @priority 0.
 588  * A region may only be added once as a subregion (unless removed with
 589  * memory_region_del_subregion()); use memory_region_init_alias() if you
 590  * want a region to be a subregion in multiple locations.
 591  *
 592  * @mr: the region to contain the new subregion; must be a container
 593  *      initialized with memory_region_init().
 594  * @offset: the offset relative to @mr where @subregion is added.
 595  * @subregion: the subregion to be added.
 596  * @priority: used for resolving overlaps; highest priority wins.
 597  */
 598 void memory_region_add_subregion_overlap(MemoryRegion *mr,
 599                                          target_phys_addr_t offset,
 600                                          MemoryRegion *subregion,
 601                                          unsigned priority);
 602
 603 /**
 604  * memory_region_get_ram_addr: Get the ram address associated with a memory
 605  *                             region
 606  *
 607  * DO NOT USE THIS FUNCTION.  This is a temporary workaround while the Xen
 608  * code is being reworked.
 609  */
 610 ram_addr_t memory_region_get_ram_addr(MemoryRegion *mr);
 611
 612 /**
 613  * memory_region_del_subregion: Remove a subregion.
 614  *
 615  * Removes a subregion from its container.
 616  *
 617  * @mr: the container to be updated.
 618  * @subregion: the region being removed; must be a current subregion of @mr.
 619  */
 620 void memory_region_del_subregion(MemoryRegion *mr,
 621                                  MemoryRegion *subregion);
 622
 623 /*
 624  * memory_region_set_enabled: dynamically enable or disable a region
 625  *
 626  * Enables or disables a memory region.  A disabled memory region
 627  * ignores all accesses to itself and its subregions.  It does not
 628  * obscure sibling subregions with lower priority - it simply behaves as
 629  * if it was removed from the hierarchy.
 630  *
 631  * Regions default to being enabled.
 632  *
 633  * @mr: the region to be updated
 634  * @enabled: whether to enable or disable the region
 635  */
 636 void memory_region_set_enabled(MemoryRegion *mr, bool enabled);
 637
 638 /*
 639  * memory_region_set_address: dynamically update the address of a region
 640  *
 641  * Dynamically updates the address of a region, relative to its parent.
 642  * May be used on regions are currently part of a memory hierarchy.
 643  *
 644  * @mr: the region to be updated
 645  * @addr: new address, relative to parent region
 646  */
 647 void memory_region_set_address(MemoryRegion *mr, target_phys_addr_t addr);
 648
 649 /*
 650  * memory_region_set_alias_offset: dynamically update a memory alias's offset
 651  *
 652  * Dynamically updates the offset into the target region that an alias points
 653  * to, as if the fourth argument to memory_region_init_alias() has changed.
 654  *
 655  * @mr: the #MemoryRegion to be updated; should be an alias.
 656  * @offset: the new offset into the target memory region
 657  */
 658 void memory_region_set_alias_offset(MemoryRegion *mr,
 659                                     target_phys_addr_t offset);
 660
 661 /**
 662  * memory_region_find: locate a MemoryRegion in an address space
 663  *
 664  * Locates the first #MemoryRegion within an address space given by
 665  * @address_space that overlaps the range given by @addr and @size.
 666  *
 667  * Returns a #MemoryRegionSection that describes a contiguous overlap.
 668  * It will have the following characteristics:
 669  *    .@offset_within_address_space >= @addr
 670  *    .@offset_within_address_space + .@size <= @addr + @size
 671  *    .@size = 0 iff no overlap was found
 672  *    .@mr is non-%NULL iff an overlap was found
 673  *
 674  * @address_space: a top-level (i.e. parentless) region that contains
 675  *       the region to be found
 676  * @addr: start of the area within @address_space to be searched
 677  * @size: size of the area to be searched
 678  */
 679 MemoryRegionSection memory_region_find(MemoryRegion *address_space,
 680                                        target_phys_addr_t addr, uint64_t size);
 681
 682 /**
 683  * memory_region_section_addr: get offset within MemoryRegionSection
 684  *
 685  * Returns offset within MemoryRegionSection
 686  *
 687  * @section: the memory region section being queried
 688  * @addr: address in address space
 689  */
 690 static inline target_phys_addr_t
 691 memory_region_section_addr(MemoryRegionSection *section,
 692                            target_phys_addr_t addr)
 693 {
 694     addr -= section->offset_within_address_space;
 695     addr += section->offset_within_region;
 696     return addr;
 697 }
 698
 699 /**
 700  * memory_global_sync_dirty_bitmap: synchronize the dirty log for all memory
 701  *
 702  * Synchronizes the dirty page log for an entire address space.
 703  * @address_space: a top-level (i.e. parentless) region that contains the
 704  *       memory being synchronized
 705  */
 706 void memory_global_sync_dirty_bitmap(MemoryRegion *address_space);
 707
 708 /**
 709  * memory_region_transaction_begin: Start a transaction.
 710  *
 711  * During a transaction, changes will be accumulated and made visible
 712  * only when the transaction ends (is committed).
 713  */
 714 void memory_region_transaction_begin(void);
 715
 716 /**
 717  * memory_region_transaction_commit: Commit a transaction and make changes
 718  *                                   visible to the guest.
 719  */
 720 void memory_region_transaction_commit(void);
 721
 722 /**
 723  * memory_listener_register: register callbacks to be called when memory
 724  *                           sections are mapped or unmapped into an address
 725  *                           space
 726  *
 727  * @listener: an object containing the callbacks to be called
 728  * @filter: if non-%NULL, only regions in this address space will be observed
 729  */
 730 void memory_listener_register(MemoryListener *listener, MemoryRegion *filter);
 731
 732 /**
 733  * memory_listener_unregister: undo the effect of memory_listener_register()
 734  *
 735  * @listener: an object containing the callbacks to be removed
 736  */
 737 void memory_listener_unregister(MemoryListener *listener);
 738
 739 /**
 740  * memory_global_dirty_log_start: begin dirty logging for all regions
 741  */
 742 void memory_global_dirty_log_start(void);
 743
 744 /**
 745  * memory_global_dirty_log_stop: begin dirty logging for all regions
 746  */
 747 void memory_global_dirty_log_stop(void);
 748
 749 void mtree_info(fprintf_function mon_printf, void *f);
 750
 751 #endif
 752
 753 #endif