qmp-commands.hx

   1 HXCOMM QMP dispatch table and documentation
   2 HXCOMM Text between SQMP and EQMP is copied to the QMP documention file and
   3 HXCOMM does not show up in the other formats.
   4
   5 SQMP
   6                         QMP Supported Commands
   7                         ----------------------
   8
   9 This document describes all commands currently supported by QMP.
  10
  11 Most of the time their usage is exactly the same as in the user Monitor, this
  12 means that any other document which also describe commands (the manpage,
  13 QEMU's manual, etc) can and should be consulted.
  14
  15 QMP has two types of commands: regular and query commands. Regular commands
  16 usually change the Virtual Machine's state someway, while query commands just
  17 return information. The sections below are divided accordingly.
  18
  19 It's important to observe that all communication examples are formatted in
  20 a reader-friendly way, so that they're easier to understand. However, in real
  21 protocol usage, they're emitted as a single line.
  22
  23 Also, the following notation is used to denote data flow:
  24
  25 -> data issued by the Client
  26 <- Server data response
  27
  28 Please, refer to the QMP specification (QMP/qmp-spec.txt) for detailed
  29 information on the Server command and response formats.
  30
  31 NOTE: This document is temporary and will be replaced soon.
  32
  33 1. Stability Considerations
  34 ===========================
  35
  36 The current QMP command set (described in this file) may be useful for a
  37 number of use cases, however it's limited and several commands have bad
  38 defined semantics, specially with regard to command completion.
  39
  40 These problems are going to be solved incrementally in the next QEMU releases
  41 and we're going to establish a deprecation policy for badly defined commands.
  42
  43 If you're planning to adopt QMP, please observe the following:
  44
  45     1. The deprecation policy will take effect and be documented soon, please
  46        check the documentation of each used command as soon as a new release of
  47        QEMU is available
  48
  49     2. DO NOT rely on anything which is not explicit documented
  50
  51     3. Errors, in special, are not documented. Applications should NOT check
  52        for specific errors classes or data (it's strongly recommended to only
  53        check for the "error" key)
  54
  55 2. Regular Commands
  56 ===================
  57
  58 Server's responses in the examples below are always a success response, please
  59 refer to the QMP specification for more details on error responses.
  60
  61 EQMP
  62
  63     {
  64         .name       = "quit",
  65         .args_type  = "",
  66         .mhandler.cmd_new = qmp_marshal_input_quit,
  67     },
  68
  69 SQMP
  70 quit
  71 ----
  72
  73 Quit the emulator.
  74
  75 Arguments: None.
  76
  77 Example:
  78
  79 -> { "execute": "quit" }
  80 <- { "return": {} }
  81
  82 EQMP
  83
  84     {
  85         .name       = "eject",
  86         .args_type  = "force:-f,device:B",
  87         .params     = "[-f] device",
  88         .help       = "eject a removable medium (use -f to force it)",
  89         .user_print = monitor_user_noop,
  90         .mhandler.cmd_new = do_eject,
  91     },
  92
  93 SQMP
  94 eject
  95 -----
  96
  97 Eject a removable medium.
  98
  99 Arguments:
 100
 101 - force: force ejection (json-bool, optional)
 102 - device: device name (json-string)
 103
 104 Example:
 105
 106 -> { "execute": "eject", "arguments": { "device": "ide1-cd0" } }
 107 <- { "return": {} }
 108
 109 Note: The "force" argument defaults to false.
 110
 111 EQMP
 112
 113     {
 114         .name       = "change",
 115         .args_type  = "device:B,target:F,arg:s?",
 116         .params     = "device filename [format]",
 117         .help       = "change a removable medium, optional format",
 118         .user_print = monitor_user_noop,
 119         .mhandler.cmd_new = do_change,
 120     },
 121
 122 SQMP
 123 change
 124 ------
 125
 126 Change a removable medium or VNC configuration.
 127
 128 Arguments:
 129
 130 - "device": device name (json-string)
 131 - "target": filename or item (json-string)
 132 - "arg": additional argument (json-string, optional)
 133
 134 Examples:
 135
 136 1. Change a removable medium
 137
 138 -> { "execute": "change",
 139              "arguments": { "device": "ide1-cd0",
 140                             "target": "/srv/images/Fedora-12-x86_64-DVD.iso" } }
 141 <- { "return": {} }
 142
 143 2. Change VNC password
 144
 145 -> { "execute": "change",
 146              "arguments": { "device": "vnc", "target": "password",
 147                             "arg": "foobar1" } }
 148 <- { "return": {} }
 149
 150 EQMP
 151
 152     {
 153         .name       = "screendump",
 154         .args_type  = "filename:F",
 155         .params     = "filename",
 156         .help       = "save screen into PPM image 'filename'",
 157         .user_print = monitor_user_noop,
 158         .mhandler.cmd_new = do_screen_dump,
 159     },
 160
 161 SQMP
 162 screendump
 163 ----------
 164
 165 Save screen into PPM image.
 166
 167 Arguments:
 168
 169 - "filename": file path (json-string)
 170
 171 Example:
 172
 173 -> { "execute": "screendump", "arguments": { "filename": "/tmp/image" } }
 174 <- { "return": {} }
 175
 176 EQMP
 177
 178     {
 179         .name       = "stop",
 180         .args_type  = "",
 181         .mhandler.cmd_new = qmp_marshal_input_stop,
 182     },
 183
 184 SQMP
 185 stop
 186 ----
 187
 188 Stop the emulator.
 189
 190 Arguments: None.
 191
 192 Example:
 193
 194 -> { "execute": "stop" }
 195 <- { "return": {} }
 196
 197 EQMP
 198
 199     {
 200         .name       = "cont",
 201         .args_type  = "",
 202         .mhandler.cmd_new = qmp_marshal_input_cont,
 203     },
 204
 205 SQMP
 206 cont
 207 ----
 208
 209 Resume emulation.
 210
 211 Arguments: None.
 212
 213 Example:
 214
 215 -> { "execute": "cont" }
 216 <- { "return": {} }
 217
 218 EQMP
 219
 220     {
 221         .name       = "system_reset",
 222         .args_type  = "",
 223         .mhandler.cmd_new = qmp_marshal_input_system_reset,
 224     },
 225
 226 SQMP
 227 system_reset
 228 ------------
 229
 230 Reset the system.
 231
 232 Arguments: None.
 233
 234 Example:
 235
 236 -> { "execute": "system_reset" }
 237 <- { "return": {} }
 238
 239 EQMP
 240
 241     {
 242         .name       = "system_powerdown",
 243         .args_type  = "",
 244         .mhandler.cmd_new = qmp_marshal_input_system_powerdown,
 245     },
 246
 247 SQMP
 248 system_powerdown
 249 ----------------
 250
 251 Send system power down event.
 252
 253 Arguments: None.
 254
 255 Example:
 256
 257 -> { "execute": "system_powerdown" }
 258 <- { "return": {} }
 259
 260 EQMP
 261
 262     {
 263         .name       = "device_add",
 264         .args_type  = "device:O",
 265         .params     = "driver[,prop=value][,...]",
 266         .help       = "add device, like -device on the command line",
 267         .user_print = monitor_user_noop,
 268         .mhandler.cmd_new = do_device_add,
 269     },
 270
 271 SQMP
 272 device_add
 273 ----------
 274
 275 Add a device.
 276
 277 Arguments:
 278
 279 - "driver": the name of the new device's driver (json-string)
 280 - "bus": the device's parent bus (device tree path, json-string, optional)
 281 - "id": the device's ID, must be unique (json-string)
 282 - device properties
 283
 284 Example:
 285
 286 -> { "execute": "device_add", "arguments": { "driver": "e1000", "id": "net1" } }
 287 <- { "return": {} }
 288
 289 Notes:
 290
 291 (1) For detailed information about this command, please refer to the
 292     'docs/qdev-device-use.txt' file.
 293
 294 (2) It's possible to list device properties by running QEMU with the
 295     "-device DEVICE,\?" command-line argument, where DEVICE is the device's name
 296
 297 EQMP
 298
 299     {
 300         .name       = "device_del",
 301         .args_type  = "id:s",
 302         .params     = "device",
 303         .help       = "remove device",
 304         .user_print = monitor_user_noop,
 305         .mhandler.cmd_new = do_device_del,
 306     },
 307
 308 SQMP
 309 device_del
 310 ----------
 311
 312 Remove a device.
 313
 314 Arguments:
 315
 316 - "id": the device's ID (json-string)
 317
 318 Example:
 319
 320 -> { "execute": "device_del", "arguments": { "id": "net1" } }
 321 <- { "return": {} }
 322
 323 EQMP
 324
 325     {
 326         .name       = "cpu",
 327         .args_type  = "index:i",
 328         .mhandler.cmd_new = qmp_marshal_input_cpu,
 329     },
 330
 331 SQMP
 332 cpu
 333 ---
 334
 335 Set the default CPU.
 336
 337 Arguments:
 338
 339 - "index": the CPU's index (json-int)
 340
 341 Example:
 342
 343 -> { "execute": "cpu", "arguments": { "index": 0 } }
 344 <- { "return": {} }
 345
 346 Note: CPUs' indexes are obtained with the 'query-cpus' command.
 347
 348 EQMP
 349
 350     {
 351         .name       = "memsave",
 352         .args_type  = "val:l,size:i,filename:s,cpu:i?",
 353         .mhandler.cmd_new = qmp_marshal_input_memsave,
 354     },
 355
 356 SQMP
 357 memsave
 358 -------
 359
 360 Save to disk virtual memory dump starting at 'val' of size 'size'.
 361
 362 Arguments:
 363
 364 - "val": the starting address (json-int)
 365 - "size": the memory size, in bytes (json-int)
 366 - "filename": file path (json-string)
 367 - "cpu": virtual CPU index (json-int, optional)
 368
 369 Example:
 370
 371 -> { "execute": "memsave",
 372              "arguments": { "val": 10,
 373                             "size": 100,
 374                             "filename": "/tmp/virtual-mem-dump" } }
 375 <- { "return": {} }
 376
 377 EQMP
 378
 379     {
 380         .name       = "pmemsave",
 381         .args_type  = "val:l,size:i,filename:s",
 382         .mhandler.cmd_new = qmp_marshal_input_pmemsave,
 383     },
 384
 385 SQMP
 386 pmemsave
 387 --------
 388
 389 Save to disk physical memory dump starting at 'val' of size 'size'.
 390
 391 Arguments:
 392
 393 - "val": the starting address (json-int)
 394 - "size": the memory size, in bytes (json-int)
 395 - "filename": file path (json-string)
 396
 397 Example:
 398
 399 -> { "execute": "pmemsave",
 400              "arguments": { "val": 10,
 401                             "size": 100,
 402                             "filename": "/tmp/physical-mem-dump" } }
 403 <- { "return": {} }
 404
 405 EQMP
 406
 407     {
 408         .name       = "inject-nmi",
 409         .args_type  = "",
 410         .mhandler.cmd_new = qmp_marshal_input_inject_nmi,
 411     },
 412
 413 SQMP
 414 inject-nmi
 415 ----------
 416
 417 Inject an NMI on guest's CPUs.
 418
 419 Arguments: None.
 420
 421 Example:
 422
 423 -> { "execute": "inject-nmi" }
 424 <- { "return": {} }
 425
 426 Note: inject-nmi is only supported for x86 guest currently, it will
 427       returns "Unsupported" error for non-x86 guest.
 428
 429 EQMP
 430
 431     {
 432         .name       = "migrate",
 433         .args_type  = "detach:-d,blk:-b,inc:-i,uri:s",
 434         .params     = "[-d] [-b] [-i] uri",
 435         .help       = "migrate to URI (using -d to not wait for completion)"
 436                       "\n\t\t\t -b for migration without shared storage with"
 437                       " full copy of disk\n\t\t\t -i for migration without "
 438                       "shared storage with incremental copy of disk "
 439                       "(base image shared between src and destination)",
 440         .user_print = monitor_user_noop,
 441         .mhandler.cmd_new = do_migrate,
 442     },
 443
 444 SQMP
 445 migrate
 446 -------
 447
 448 Migrate to URI.
 449
 450 Arguments:
 451
 452 - "blk": block migration, full disk copy (json-bool, optional)
 453 - "inc": incremental disk copy (json-bool, optional)
 454 - "uri": Destination URI (json-string)
 455
 456 Example:
 457
 458 -> { "execute": "migrate", "arguments": { "uri": "tcp:0:4446" } }
 459 <- { "return": {} }
 460
 461 Notes:
 462
 463 (1) The 'query-migrate' command should be used to check migration's progress
 464     and final result (this information is provided by the 'status' member)
 465 (2) All boolean arguments default to false
 466 (3) The user Monitor's "detach" argument is invalid in QMP and should not
 467     be used
 468
 469 EQMP
 470
 471     {
 472         .name       = "migrate_cancel",
 473         .args_type  = "",
 474         .mhandler.cmd_new = qmp_marshal_input_migrate_cancel,
 475     },
 476
 477 SQMP
 478 migrate_cancel
 479 --------------
 480
 481 Cancel the current migration.
 482
 483 Arguments: None.
 484
 485 Example:
 486
 487 -> { "execute": "migrate_cancel" }
 488 <- { "return": {} }
 489
 490 EQMP
 491
 492     {
 493         .name       = "migrate_set_speed",
 494         .args_type  = "value:o",
 495         .mhandler.cmd_new = qmp_marshal_input_migrate_set_speed,
 496     },
 497
 498 SQMP
 499 migrate_set_speed
 500 -----------------
 501
 502 Set maximum speed for migrations.
 503
 504 Arguments:
 505
 506 - "value": maximum speed, in bytes per second (json-int)
 507
 508 Example:
 509
 510 -> { "execute": "migrate_set_speed", "arguments": { "value": 1024 } }
 511 <- { "return": {} }
 512
 513 EQMP
 514
 515     {
 516         .name       = "migrate_set_downtime",
 517         .args_type  = "value:T",
 518         .mhandler.cmd_new = qmp_marshal_input_migrate_set_downtime,
 519     },
 520
 521 SQMP
 522 migrate_set_downtime
 523 --------------------
 524
 525 Set maximum tolerated downtime (in seconds) for migrations.
 526
 527 Arguments:
 528
 529 - "value": maximum downtime (json-number)
 530
 531 Example:
 532
 533 -> { "execute": "migrate_set_downtime", "arguments": { "value": 0.1 } }
 534 <- { "return": {} }
 535
 536 EQMP
 537
 538     {
 539         .name       = "client_migrate_info",
 540         .args_type  = "protocol:s,hostname:s,port:i?,tls-port:i?,cert-subject:s?",
 541         .params     = "protocol hostname port tls-port cert-subject",
 542         .help       = "send migration info to spice/vnc client",
 543         .user_print = monitor_user_noop,
 544         .mhandler.cmd_async = client_migrate_info,
 545         .flags      = MONITOR_CMD_ASYNC,
 546     },
 547
 548 SQMP
 549 client_migrate_info
 550 ------------------
 551
 552 Set the spice/vnc connection info for the migration target.  The spice/vnc
 553 server will ask the spice/vnc client to automatically reconnect using the
 554 new parameters (if specified) once the vm migration finished successfully.
 555
 556 Arguments:
 557
 558 - "protocol":     protocol: "spice" or "vnc" (json-string)
 559 - "hostname":     migration target hostname (json-string)
 560 - "port":         spice/vnc tcp port for plaintext channels (json-int, optional)
 561 - "tls-port":     spice tcp port for tls-secured channels (json-int, optional)
 562 - "cert-subject": server certificate subject (json-string, optional)
 563
 564 Example:
 565
 566 -> { "execute": "client_migrate_info",
 567      "arguments": { "protocol": "spice",
 568                     "hostname": "virt42.lab.kraxel.org",
 569                     "port": 1234 } }
 570 <- { "return": {} }
 571
 572 EQMP
 573
 574     {
 575         .name       = "netdev_add",
 576         .args_type  = "netdev:O",
 577         .params     = "[user|tap|socket],id=str[,prop=value][,...]",
 578         .help       = "add host network device",
 579         .user_print = monitor_user_noop,
 580         .mhandler.cmd_new = do_netdev_add,
 581     },
 582
 583 SQMP
 584 netdev_add
 585 ----------
 586
 587 Add host network device.
 588
 589 Arguments:
 590
 591 - "type": the device type, "tap", "user", ... (json-string)
 592 - "id": the device's ID, must be unique (json-string)
 593 - device options
 594
 595 Example:
 596
 597 -> { "execute": "netdev_add", "arguments": { "type": "user", "id": "netdev1" } }
 598 <- { "return": {} }
 599
 600 Note: The supported device options are the same ones supported by the '-net'
 601       command-line argument, which are listed in the '-help' output or QEMU's
 602       manual
 603
 604 EQMP
 605
 606     {
 607         .name       = "netdev_del",
 608         .args_type  = "id:s",
 609         .params     = "id",
 610         .help       = "remove host network device",
 611         .user_print = monitor_user_noop,
 612         .mhandler.cmd_new = do_netdev_del,
 613     },
 614
 615 SQMP
 616 netdev_del
 617 ----------
 618
 619 Remove host network device.
 620
 621 Arguments:
 622
 623 - "id": the device's ID, must be unique (json-string)
 624
 625 Example:
 626
 627 -> { "execute": "netdev_del", "arguments": { "id": "netdev1" } }
 628 <- { "return": {} }
 629
 630
 631 EQMP
 632
 633     {
 634         .name       = "block_resize",
 635         .args_type  = "device:B,size:o",
 636         .mhandler.cmd_new = qmp_marshal_input_block_resize,
 637     },
 638
 639 SQMP
 640 block_resize
 641 ------------
 642
 643 Resize a block image while a guest is running.
 644
 645 Arguments:
 646
 647 - "device": the device's ID, must be unique (json-string)
 648 - "size": new size
 649
 650 Example:
 651
 652 -> { "execute": "block_resize", "arguments": { "device": "scratch", "size": 1073741824 } }
 653 <- { "return": {} }
 654
 655 EQMP
 656
 657     {
 658         .name       = "blockdev-snapshot-sync",
 659         .args_type  = "device:B,snapshot-file:s,format:s?",
 660         .mhandler.cmd_new = qmp_marshal_input_blockdev_snapshot_sync,
 661     },
 662
 663 SQMP
 664 blockdev-snapshot-sync
 665 ----------------------
 666
 667 Synchronous snapshot of a block device. snapshot-file specifies the
 668 target of the new image. If the file exists, or if it is a device, the
 669 snapshot will be created in the existing file/device. If does not
 670 exist, a new file will be created. format specifies the format of the
 671 snapshot image, default is qcow2.
 672
 673 Arguments:
 674
 675 - "device": device name to snapshot (json-string)
 676 - "snapshot-file": name of new image file (json-string)
 677 - "format": format of new image (json-string, optional)
 678
 679 Example:
 680
 681 -> { "execute": "blockdev-snapshot-sync", "arguments": { "device": "ide-hd0",
 682                                                          "snapshot-file":
 683                                                         "/some/place/my-image",
 684                                                         "format": "qcow2" } }
 685 <- { "return": {} }
 686
 687 EQMP
 688
 689     {
 690         .name       = "balloon",
 691         .args_type  = "value:M",
 692         .mhandler.cmd_new = qmp_marshal_input_balloon,
 693     },
 694
 695 SQMP
 696 balloon
 697 -------
 698
 699 Request VM to change its memory allocation (in bytes).
 700
 701 Arguments:
 702
 703 - "value": New memory allocation (json-int)
 704
 705 Example:
 706
 707 -> { "execute": "balloon", "arguments": { "value": 536870912 } }
 708 <- { "return": {} }
 709
 710 EQMP
 711
 712     {
 713         .name       = "set_link",
 714         .args_type  = "name:s,up:b",
 715         .mhandler.cmd_new = qmp_marshal_input_set_link,
 716     },
 717
 718 SQMP
 719 set_link
 720 --------
 721
 722 Change the link status of a network adapter.
 723
 724 Arguments:
 725
 726 - "name": network device name (json-string)
 727 - "up": status is up (json-bool)
 728
 729 Example:
 730
 731 -> { "execute": "set_link", "arguments": { "name": "e1000.0", "up": false } }
 732 <- { "return": {} }
 733
 734 EQMP
 735
 736     {
 737         .name       = "getfd",
 738         .args_type  = "fdname:s",
 739         .params     = "getfd name",
 740         .help       = "receive a file descriptor via SCM rights and assign it a name",
 741         .user_print = monitor_user_noop,
 742         .mhandler.cmd_new = do_getfd,
 743     },
 744
 745 SQMP
 746 getfd
 747 -----
 748
 749 Receive a file descriptor via SCM rights and assign it a name.
 750
 751 Arguments:
 752
 753 - "fdname": file descriptor name (json-string)
 754
 755 Example:
 756
 757 -> { "execute": "getfd", "arguments": { "fdname": "fd1" } }
 758 <- { "return": {} }
 759
 760 EQMP
 761
 762     {
 763         .name       = "closefd",
 764         .args_type  = "fdname:s",
 765         .params     = "closefd name",
 766         .help       = "close a file descriptor previously passed via SCM rights",
 767         .user_print = monitor_user_noop,
 768         .mhandler.cmd_new = do_closefd,
 769     },
 770
 771 SQMP
 772 closefd
 773 -------
 774
 775 Close a file descriptor previously passed via SCM rights.
 776
 777 Arguments:
 778
 779 - "fdname": file descriptor name (json-string)
 780
 781 Example:
 782
 783 -> { "execute": "closefd", "arguments": { "fdname": "fd1" } }
 784 <- { "return": {} }
 785
 786 EQMP
 787
 788     {
 789         .name       = "block_passwd",
 790         .args_type  = "device:B,password:s",
 791         .mhandler.cmd_new = qmp_marshal_input_block_passwd,
 792     },
 793
 794 SQMP
 795 block_passwd
 796 ------------
 797
 798 Set the password of encrypted block devices.
 799
 800 Arguments:
 801
 802 - "device": device name (json-string)
 803 - "password": password (json-string)
 804
 805 Example:
 806
 807 -> { "execute": "block_passwd", "arguments": { "device": "ide0-hd0",
 808                                                "password": "12345" } }
 809 <- { "return": {} }
 810
 811 EQMP
 812
 813     {
 814         .name       = "block_set_io_throttle",
 815         .args_type  = "device:B,bps:l,bps_rd:l,bps_wr:l,iops:l,iops_rd:l,iops_wr:l",
 816         .params     = "device bps bps_rd bps_wr iops iops_rd iops_wr",
 817         .help       = "change I/O throttle limits for a block drive",
 818         .user_print = monitor_user_noop,
 819         .mhandler.cmd_new = do_block_set_io_throttle,
 820     },
 821
 822 SQMP
 823 block_set_io_throttle
 824 ------------
 825
 826 Change I/O throttle limits for a block drive.
 827
 828 Arguments:
 829
 830 - "device": device name (json-string)
 831 - "bps":  total throughput limit in bytes per second(json-int)
 832 - "bps_rd":  read throughput limit in bytes per second(json-int)
 833 - "bps_wr":  read throughput limit in bytes per second(json-int)
 834 - "iops":  total I/O operations per second(json-int)
 835 - "iops_rd":  read I/O operations per second(json-int)
 836 - "iops_wr":  write I/O operations per second(json-int)
 837
 838 Example:
 839
 840 -> { "execute": "block_set_io_throttle", "arguments": { "device": "virtio0",
 841                                                "bps": "1000000",
 842                                                "bps_rd": "0",
 843                                                "bps_wr": "0",
 844                                                "iops": "0",
 845                                                "iops_rd": "0",
 846                                                "iops_wr": "0" } }
 847 <- { "return": {} }
 848
 849 EQMP
 850
 851     {
 852         .name       = "set_password",
 853         .args_type  = "protocol:s,password:s,connected:s?",
 854         .params     = "protocol password action-if-connected",
 855         .help       = "set spice/vnc password",
 856         .user_print = monitor_user_noop,
 857         .mhandler.cmd_new = set_password,
 858     },
 859
 860 SQMP
 861 set_password
 862 ------------
 863
 864 Set the password for vnc/spice protocols.
 865
 866 Arguments:
 867
 868 - "protocol": protocol name (json-string)
 869 - "password": password (json-string)
 870 - "connected": [ keep | disconnect | fail ] (josn-string, optional)
 871
 872 Example:
 873
 874 -> { "execute": "set_password", "arguments": { "protocol": "vnc",
 875                                                "password": "secret" } }
 876 <- { "return": {} }
 877
 878 EQMP
 879
 880     {
 881         .name       = "expire_password",
 882         .args_type  = "protocol:s,time:s",
 883         .params     = "protocol time",
 884         .help       = "set spice/vnc password expire-time",
 885         .user_print = monitor_user_noop,
 886         .mhandler.cmd_new = expire_password,
 887     },
 888
 889 SQMP
 890 expire_password
 891 ---------------
 892
 893 Set the password expire time for vnc/spice protocols.
 894
 895 Arguments:
 896
 897 - "protocol": protocol name (json-string)
 898 - "time": [ now | never | +secs | secs ] (json-string)
 899
 900 Example:
 901
 902 -> { "execute": "expire_password", "arguments": { "protocol": "vnc",
 903                                                   "time": "+60" } }
 904 <- { "return": {} }
 905
 906 EQMP
 907
 908     {
 909         .name       = "add_client",
 910         .args_type  = "protocol:s,fdname:s,skipauth:b?",
 911         .params     = "protocol fdname skipauth",
 912         .help       = "add a graphics client",
 913         .user_print = monitor_user_noop,
 914         .mhandler.cmd_new = add_graphics_client,
 915     },
 916
 917 SQMP
 918 add_client
 919 ----------
 920
 921 Add a graphics client
 922
 923 Arguments:
 924
 925 - "protocol": protocol name (json-string)
 926 - "fdname": file descriptor name (json-string)
 927
 928 Example:
 929
 930 -> { "execute": "add_client", "arguments": { "protocol": "vnc",
 931                                              "fdname": "myclient" } }
 932 <- { "return": {} }
 933
 934 EQMP
 935     {
 936         .name       = "qmp_capabilities",
 937         .args_type  = "",
 938         .params     = "",
 939         .help       = "enable QMP capabilities",
 940         .user_print = monitor_user_noop,
 941         .mhandler.cmd_new = do_qmp_capabilities,
 942     },
 943
 944 SQMP
 945 qmp_capabilities
 946 ----------------
 947
 948 Enable QMP capabilities.
 949
 950 Arguments: None.
 951
 952 Example:
 953
 954 -> { "execute": "qmp_capabilities" }
 955 <- { "return": {} }
 956
 957 Note: This command must be issued before issuing any other command.
 958
 959 EQMP
 960
 961     {
 962         .name       = "human-monitor-command",
 963         .args_type  = "command-line:s,cpu-index:i?",
 964         .mhandler.cmd_new = qmp_marshal_input_human_monitor_command,
 965     },
 966
 967 SQMP
 968 human-monitor-command
 969 ---------------------
 970
 971 Execute a Human Monitor command.
 972
 973 Arguments:
 974
 975 - command-line: the command name and its arguments, just like the
 976                 Human Monitor's shell (json-string)
 977 - cpu-index: select the CPU number to be used by commands which access CPU
 978              data, like 'info registers'. The Monitor selects CPU 0 if this
 979              argument is not provided (json-int, optional)
 980
 981 Example:
 982
 983 -> { "execute": "human-monitor-command", "arguments": { "command-line": "info kvm" } }
 984 <- { "return": "kvm support: enabled\r\n" }
 985
 986 Notes:
 987
 988 (1) The Human Monitor is NOT an stable interface, this means that command
 989     names, arguments and responses can change or be removed at ANY time.
 990     Applications that rely on long term stability guarantees should NOT
 991     use this command
 992
 993 (2) Limitations:
 994
 995     o This command is stateless, this means that commands that depend
 996       on state information (such as getfd) might not work
 997
 998     o Commands that prompt the user for data (eg. 'cont' when the block
 999       device is encrypted) don't currently work
1000
1001 3. Query Commands
1002 =================
1003
1004 HXCOMM Each query command below is inside a SQMP/EQMP section, do NOT change
1005 HXCOMM this! We will possibly move query commands definitions inside those
1006 HXCOMM sections, just like regular commands.
1007
1008 EQMP
1009
1010 SQMP
1011 query-version
1012 -------------
1013
1014 Show QEMU version.
1015
1016 Return a json-object with the following information:
1017
1018 - "qemu": A json-object containing three integer values:
1019     - "major": QEMU's major version (json-int)
1020     - "minor": QEMU's minor version (json-int)
1021     - "micro": QEMU's micro version (json-int)
1022 - "package": package's version (json-string)
1023
1024 Example:
1025
1026 -> { "execute": "query-version" }
1027 <- {
1028       "return":{
1029          "qemu":{
1030             "major":0,
1031             "minor":11,
1032             "micro":5
1033          },
1034          "package":""
1035       }
1036    }
1037
1038 EQMP
1039
1040     {
1041         .name       = "query-version",
1042         .args_type  = "",
1043         .mhandler.cmd_new = qmp_marshal_input_query_version,
1044     },
1045
1046 SQMP
1047 query-commands
1048 --------------
1049
1050 List QMP available commands.
1051
1052 Each command is represented by a json-object, the returned value is a json-array
1053 of all commands.
1054
1055 Each json-object contain:
1056
1057 - "name": command's name (json-string)
1058
1059 Example:
1060
1061 -> { "execute": "query-commands" }
1062 <- {
1063       "return":[
1064          {
1065             "name":"query-balloon"
1066          },
1067          {
1068             "name":"system_powerdown"
1069          }
1070       ]
1071    }
1072
1073 Note: This example has been shortened as the real response is too long.
1074
1075 EQMP
1076
1077     {
1078         .name       = "query-commands",
1079         .args_type  = "",
1080         .mhandler.cmd_new = qmp_marshal_input_query_commands,
1081     },
1082
1083 SQMP
1084 query-chardev
1085 -------------
1086
1087 Each device is represented by a json-object. The returned value is a json-array
1088 of all devices.
1089
1090 Each json-object contain the following:
1091
1092 - "label": device's label (json-string)
1093 - "filename": device's file (json-string)
1094
1095 Example:
1096
1097 -> { "execute": "query-chardev" }
1098 <- {
1099       "return":[
1100          {
1101             "label":"monitor",
1102             "filename":"stdio"
1103          },
1104          {
1105             "label":"serial0",
1106             "filename":"vc"
1107          }
1108       ]
1109    }
1110
1111 EQMP
1112
1113     {
1114         .name       = "query-chardev",
1115         .args_type  = "",
1116         .mhandler.cmd_new = qmp_marshal_input_query_chardev,
1117     },
1118
1119 SQMP
1120 query-block
1121 -----------
1122
1123 Show the block devices.
1124
1125 Each block device information is stored in a json-object and the returned value
1126 is a json-array of all devices.
1127
1128 Each json-object contain the following:
1129
1130 - "device": device name (json-string)
1131 - "type": device type (json-string)
1132          - deprecated, retained for backward compatibility
1133          - Possible values: "unknown"
1134 - "removable": true if the device is removable, false otherwise (json-bool)
1135 - "locked": true if the device is locked, false otherwise (json-bool)
1136 - "tray-open": only present if removable, true if the device has a tray,
1137                and it is open (json-bool)
1138 - "inserted": only present if the device is inserted, it is a json-object
1139    containing the following:
1140          - "file": device file name (json-string)
1141          - "ro": true if read-only, false otherwise (json-bool)
1142          - "drv": driver format name (json-string)
1143              - Possible values: "blkdebug", "bochs", "cloop", "cow", "dmg",
1144                                 "file", "file", "ftp", "ftps", "host_cdrom",
1145                                 "host_device", "host_floppy", "http", "https",
1146                                 "nbd", "parallels", "qcow", "qcow2", "raw",
1147                                 "tftp", "vdi", "vmdk", "vpc", "vvfat"
1148          - "backing_file": backing file name (json-string, optional)
1149          - "encrypted": true if encrypted, false otherwise (json-bool)
1150          - "bps": limit total bytes per second (json-int)
1151          - "bps_rd": limit read bytes per second (json-int)
1152          - "bps_wr": limit write bytes per second (json-int)
1153          - "iops": limit total I/O operations per second (json-int)
1154          - "iops_rd": limit read operations per second (json-int)
1155          - "iops_wr": limit write operations per second (json-int)
1156
1157 - "io-status": I/O operation status, only present if the device supports it
1158                and the VM is configured to stop on errors. It's always reset
1159                to "ok" when the "cont" command is issued (json_string, optional)
1160              - Possible values: "ok", "failed", "nospace"
1161
1162 Example:
1163
1164 -> { "execute": "query-block" }
1165 <- {
1166       "return":[
1167          {
1168             "io-status": "ok",
1169             "device":"ide0-hd0",
1170             "locked":false,
1171             "removable":false,
1172             "inserted":{
1173                "ro":false,
1174                "drv":"qcow2",
1175                "encrypted":false,
1176                "file":"disks/test.img",
1177                "bps":1000000,
1178                "bps_rd":0,
1179                "bps_wr":0,
1180                "iops":1000000,
1181                "iops_rd":0,
1182                "iops_wr":0,
1183             },
1184             "type":"unknown"
1185          },
1186          {
1187             "io-status": "ok",
1188             "device":"ide1-cd0",
1189             "locked":false,
1190             "removable":true,
1191             "type":"unknown"
1192          },
1193          {
1194             "device":"floppy0",
1195             "locked":false,
1196             "removable":true,
1197             "type":"unknown"
1198          },
1199          {
1200             "device":"sd0",
1201             "locked":false,
1202             "removable":true,
1203             "type":"unknown"
1204          }
1205       ]
1206    }
1207
1208 EQMP
1209
1210     {
1211         .name       = "query-block",
1212         .args_type  = "",
1213         .mhandler.cmd_new = qmp_marshal_input_query_block,
1214     },
1215
1216 SQMP
1217 query-blockstats
1218 ----------------
1219
1220 Show block device statistics.
1221
1222 Each device statistic information is stored in a json-object and the returned
1223 value is a json-array of all devices.
1224
1225 Each json-object contain the following:
1226
1227 - "device": device name (json-string)
1228 - "stats": A json-object with the statistics information, it contains:
1229     - "rd_bytes": bytes read (json-int)
1230     - "wr_bytes": bytes written (json-int)
1231     - "rd_operations": read operations (json-int)
1232     - "wr_operations": write operations (json-int)
1233     - "flush_operations": cache flush operations (json-int)
1234     - "wr_total_time_ns": total time spend on writes in nano-seconds (json-int)
1235     - "rd_total_time_ns": total time spend on reads in nano-seconds (json-int)
1236     - "flush_total_time_ns": total time spend on cache flushes in nano-seconds (json-int)
1237     - "wr_highest_offset": Highest offset of a sector written since the
1238                            BlockDriverState has been opened (json-int)
1239 - "parent": Contains recursively the statistics of the underlying
1240             protocol (e.g. the host file for a qcow2 image). If there is
1241             no underlying protocol, this field is omitted
1242             (json-object, optional)
1243
1244 Example:
1245
1246 -> { "execute": "query-blockstats" }
1247 <- {
1248       "return":[
1249          {
1250             "device":"ide0-hd0",
1251             "parent":{
1252                "stats":{
1253                   "wr_highest_offset":3686448128,
1254                   "wr_bytes":9786368,
1255                   "wr_operations":751,
1256                   "rd_bytes":122567168,
1257                   "rd_operations":36772
1258                   "wr_total_times_ns":313253456
1259                   "rd_total_times_ns":3465673657
1260                   "flush_total_times_ns":49653
1261                   "flush_operations":61,
1262                }
1263             },
1264             "stats":{
1265                "wr_highest_offset":2821110784,
1266                "wr_bytes":9786368,
1267                "wr_operations":692,
1268                "rd_bytes":122739200,
1269                "rd_operations":36604
1270                "flush_operations":51,
1271                "wr_total_times_ns":313253456
1272                "rd_total_times_ns":3465673657
1273                "flush_total_times_ns":49653
1274             }
1275          },
1276          {
1277             "device":"ide1-cd0",
1278             "stats":{
1279                "wr_highest_offset":0,
1280                "wr_bytes":0,
1281                "wr_operations":0,
1282                "rd_bytes":0,
1283                "rd_operations":0
1284                "flush_operations":0,
1285                "wr_total_times_ns":0
1286                "rd_total_times_ns":0
1287                "flush_total_times_ns":0
1288             }
1289          },
1290          {
1291             "device":"floppy0",
1292             "stats":{
1293                "wr_highest_offset":0,
1294                "wr_bytes":0,
1295                "wr_operations":0,
1296                "rd_bytes":0,
1297                "rd_operations":0
1298                "flush_operations":0,
1299                "wr_total_times_ns":0
1300                "rd_total_times_ns":0
1301                "flush_total_times_ns":0
1302             }
1303          },
1304          {
1305             "device":"sd0",
1306             "stats":{
1307                "wr_highest_offset":0,
1308                "wr_bytes":0,
1309                "wr_operations":0,
1310                "rd_bytes":0,
1311                "rd_operations":0
1312                "flush_operations":0,
1313                "wr_total_times_ns":0
1314                "rd_total_times_ns":0
1315                "flush_total_times_ns":0
1316             }
1317          }
1318       ]
1319    }
1320
1321 EQMP
1322
1323     {
1324         .name       = "query-blockstats",
1325         .args_type  = "",
1326         .mhandler.cmd_new = qmp_marshal_input_query_blockstats,
1327     },
1328
1329 SQMP
1330 query-cpus
1331 ----------
1332
1333 Show CPU information.
1334
1335 Return a json-array. Each CPU is represented by a json-object, which contains:
1336
1337 - "CPU": CPU index (json-int)
1338 - "current": true if this is the current CPU, false otherwise (json-bool)
1339 - "halted": true if the cpu is halted, false otherwise (json-bool)
1340 - Current program counter. The key's name depends on the architecture:
1341      "pc": i386/x86_64 (json-int)
1342      "nip": PPC (json-int)
1343      "pc" and "npc": sparc (json-int)
1344      "PC": mips (json-int)
1345 - "thread_id": ID of the underlying host thread (json-int)
1346
1347 Example:
1348
1349 -> { "execute": "query-cpus" }
1350 <- {
1351       "return":[
1352          {
1353             "CPU":0,
1354             "current":true,
1355             "halted":false,
1356             "pc":3227107138
1357             "thread_id":3134
1358          },
1359          {
1360             "CPU":1,
1361             "current":false,
1362             "halted":true,
1363             "pc":7108165
1364             "thread_id":3135
1365          }
1366       ]
1367    }
1368
1369 EQMP
1370
1371     {
1372         .name       = "query-cpus",
1373         .args_type  = "",
1374         .mhandler.cmd_new = qmp_marshal_input_query_cpus,
1375     },
1376
1377 SQMP
1378 query-pci
1379 ---------
1380
1381 PCI buses and devices information.
1382
1383 The returned value is a json-array of all buses. Each bus is represented by
1384 a json-object, which has a key with a json-array of all PCI devices attached
1385 to it. Each device is represented by a json-object.
1386
1387 The bus json-object contains the following:
1388
1389 - "bus": bus number (json-int)
1390 - "devices": a json-array of json-objects, each json-object represents a
1391              PCI device
1392
1393 The PCI device json-object contains the following:
1394
1395 - "bus": identical to the parent's bus number (json-int)
1396 - "slot": slot number (json-int)
1397 - "function": function number (json-int)
1398 - "class_info": a json-object containing:
1399      - "desc": device class description (json-string, optional)
1400      - "class": device class number (json-int)
1401 - "id": a json-object containing:
1402      - "device": device ID (json-int)
1403      - "vendor": vendor ID (json-int)
1404 - "irq": device's IRQ if assigned (json-int, optional)
1405 - "qdev_id": qdev id string (json-string)
1406 - "pci_bridge": It's a json-object, only present if this device is a
1407                 PCI bridge, contains:
1408      - "bus": bus number (json-int)
1409      - "secondary": secondary bus number (json-int)
1410      - "subordinate": subordinate bus number (json-int)
1411      - "io_range": I/O memory range information, a json-object with the
1412                    following members:
1413                  - "base": base address, in bytes (json-int)
1414                  - "limit": limit address, in bytes (json-int)
1415      - "memory_range": memory range information, a json-object with the
1416                        following members:
1417                  - "base": base address, in bytes (json-int)
1418                  - "limit": limit address, in bytes (json-int)
1419      - "prefetchable_range": Prefetchable memory range information, a
1420                              json-object with the following members:
1421                  - "base": base address, in bytes (json-int)
1422                  - "limit": limit address, in bytes (json-int)
1423      - "devices": a json-array of PCI devices if there's any attached, each
1424                   each element is represented by a json-object, which contains
1425                   the same members of the 'PCI device json-object' described
1426                   above (optional)
1427 - "regions": a json-array of json-objects, each json-object represents a
1428              memory region of this device
1429
1430 The memory range json-object contains the following:
1431
1432 - "base": base memory address (json-int)
1433 - "limit": limit value (json-int)
1434
1435 The region json-object can be an I/O region or a memory region, an I/O region
1436 json-object contains the following:
1437
1438 - "type": "io" (json-string, fixed)
1439 - "bar": BAR number (json-int)
1440 - "address": memory address (json-int)
1441 - "size": memory size (json-int)
1442
1443 A memory region json-object contains the following:
1444
1445 - "type": "memory" (json-string, fixed)
1446 - "bar": BAR number (json-int)
1447 - "address": memory address (json-int)
1448 - "size": memory size (json-int)
1449 - "mem_type_64": true or false (json-bool)
1450 - "prefetch": true or false (json-bool)
1451
1452 Example:
1453
1454 -> { "execute": "query-pci" }
1455 <- {
1456       "return":[
1457          {
1458             "bus":0,
1459             "devices":[
1460                {
1461                   "bus":0,
1462                   "qdev_id":"",
1463                   "slot":0,
1464                   "class_info":{
1465                      "class":1536,
1466                      "desc":"Host bridge"
1467                   },
1468                   "id":{
1469                      "device":32902,
1470                      "vendor":4663
1471                   },
1472                   "function":0,
1473                   "regions":[
1474
1475                   ]
1476                },
1477                {
1478                   "bus":0,
1479                   "qdev_id":"",
1480                   "slot":1,
1481                   "class_info":{
1482                      "class":1537,
1483                      "desc":"ISA bridge"
1484                   },
1485                   "id":{
1486                      "device":32902,
1487                      "vendor":28672
1488                   },
1489                   "function":0,
1490                   "regions":[
1491
1492                   ]
1493                },
1494                {
1495                   "bus":0,
1496                   "qdev_id":"",
1497                   "slot":1,
1498                   "class_info":{
1499                      "class":257,
1500                      "desc":"IDE controller"
1501                   },
1502                   "id":{
1503                      "device":32902,
1504                      "vendor":28688
1505                   },
1506                   "function":1,
1507                   "regions":[
1508                      {
1509                         "bar":4,
1510                         "size":16,
1511                         "address":49152,
1512                         "type":"io"
1513                      }
1514                   ]
1515                },
1516                {
1517                   "bus":0,
1518                   "qdev_id":"",
1519                   "slot":2,
1520                   "class_info":{
1521                      "class":768,
1522                      "desc":"VGA controller"
1523                   },
1524                   "id":{
1525                      "device":4115,
1526                      "vendor":184
1527                   },
1528                   "function":0,
1529                   "regions":[
1530                      {
1531                         "prefetch":true,
1532                         "mem_type_64":false,
1533                         "bar":0,
1534                         "size":33554432,
1535                         "address":4026531840,
1536                         "type":"memory"
1537                      },
1538                      {
1539                         "prefetch":false,
1540                         "mem_type_64":false,
1541                         "bar":1,
1542                         "size":4096,
1543                         "address":4060086272,
1544                         "type":"memory"
1545                      },
1546                      {
1547                         "prefetch":false,
1548                         "mem_type_64":false,
1549                         "bar":6,
1550                         "size":65536,
1551                         "address":-1,
1552                         "type":"memory"
1553                      }
1554                   ]
1555                },
1556                {
1557                   "bus":0,
1558                   "qdev_id":"",
1559                   "irq":11,
1560                   "slot":4,
1561                   "class_info":{
1562                      "class":1280,
1563                      "desc":"RAM controller"
1564                   },
1565                   "id":{
1566                      "device":6900,
1567                      "vendor":4098
1568                   },
1569                   "function":0,
1570                   "regions":[
1571                      {
1572                         "bar":0,
1573                         "size":32,
1574                         "address":49280,
1575                         "type":"io"
1576                      }
1577                   ]
1578                }
1579             ]
1580          }
1581       ]
1582    }
1583
1584 Note: This example has been shortened as the real response is too long.
1585
1586 EQMP
1587
1588     {
1589         .name       = "query-pci",
1590         .args_type  = "",
1591         .mhandler.cmd_new = qmp_marshal_input_query_pci,
1592     },
1593
1594 SQMP
1595 query-kvm
1596 ---------
1597
1598 Show KVM information.
1599
1600 Return a json-object with the following information:
1601
1602 - "enabled": true if KVM support is enabled, false otherwise (json-bool)
1603 - "present": true if QEMU has KVM support, false otherwise (json-bool)
1604
1605 Example:
1606
1607 -> { "execute": "query-kvm" }
1608 <- { "return": { "enabled": true, "present": true } }
1609
1610 EQMP
1611
1612     {
1613         .name       = "query-kvm",
1614         .args_type  = "",
1615         .mhandler.cmd_new = qmp_marshal_input_query_kvm,
1616     },
1617
1618 SQMP
1619 query-status
1620 ------------
1621
1622 Return a json-object with the following information:
1623
1624 - "running": true if the VM is running, or false if it is paused (json-bool)
1625 - "singlestep": true if the VM is in single step mode,
1626                 false otherwise (json-bool)
1627 - "status": one of the following values (json-string)
1628     "debug" - QEMU is running on a debugger
1629     "inmigrate" - guest is paused waiting for an incoming migration
1630     "internal-error" - An internal error that prevents further guest
1631     execution has occurred
1632     "io-error" - the last IOP has failed and the device is configured
1633     to pause on I/O errors
1634     "paused" - guest has been paused via the 'stop' command
1635     "postmigrate" - guest is paused following a successful 'migrate'
1636     "prelaunch" - QEMU was started with -S and guest has not started
1637     "finish-migrate" - guest is paused to finish the migration process
1638     "restore-vm" - guest is paused to restore VM state
1639     "running" - guest is actively running
1640     "save-vm" - guest is paused to save the VM state
1641     "shutdown" - guest is shut down (and -no-shutdown is in use)
1642     "watchdog" - the watchdog action is configured to pause and
1643      has been triggered
1644
1645 Example:
1646
1647 -> { "execute": "query-status" }
1648 <- { "return": { "running": true, "singlestep": false, "status": "running" } }
1649
1650 EQMP
1651
1652     {
1653         .name       = "query-status",
1654         .args_type  = "",
1655         .mhandler.cmd_new = qmp_marshal_input_query_status,
1656     },
1657
1658 SQMP
1659 query-mice
1660 ----------
1661
1662 Show VM mice information.
1663
1664 Each mouse is represented by a json-object, the returned value is a json-array
1665 of all mice.
1666
1667 The mouse json-object contains the following:
1668
1669 - "name": mouse's name (json-string)
1670 - "index": mouse's index (json-int)
1671 - "current": true if this mouse is receiving events, false otherwise (json-bool)
1672 - "absolute": true if the mouse generates absolute input events (json-bool)
1673
1674 Example:
1675
1676 -> { "execute": "query-mice" }
1677 <- {
1678       "return":[
1679          {
1680             "name":"QEMU Microsoft Mouse",
1681             "index":0,
1682             "current":false,
1683             "absolute":false
1684          },
1685          {
1686             "name":"QEMU PS/2 Mouse",
1687             "index":1,
1688             "current":true,
1689             "absolute":true
1690          }
1691       ]
1692    }
1693
1694 EQMP
1695
1696     {
1697         .name       = "query-mice",
1698         .args_type  = "",
1699         .mhandler.cmd_new = qmp_marshal_input_query_mice,
1700     },
1701
1702 SQMP
1703 query-vnc
1704 ---------
1705
1706 Show VNC server information.
1707
1708 Return a json-object with server information. Connected clients are returned
1709 as a json-array of json-objects.
1710
1711 The main json-object contains the following:
1712
1713 - "enabled": true or false (json-bool)
1714 - "host": server's IP address (json-string)
1715 - "family": address family (json-string)
1716          - Possible values: "ipv4", "ipv6", "unix", "unknown"
1717 - "service": server's port number (json-string)
1718 - "auth": authentication method (json-string)
1719          - Possible values: "invalid", "none", "ra2", "ra2ne", "sasl", "tight",
1720                             "tls", "ultra", "unknown", "vencrypt", "vencrypt",
1721                             "vencrypt+plain", "vencrypt+tls+none",
1722                             "vencrypt+tls+plain", "vencrypt+tls+sasl",
1723                             "vencrypt+tls+vnc", "vencrypt+x509+none",
1724                             "vencrypt+x509+plain", "vencrypt+x509+sasl",
1725                             "vencrypt+x509+vnc", "vnc"
1726 - "clients": a json-array of all connected clients
1727
1728 Clients are described by a json-object, each one contain the following:
1729
1730 - "host": client's IP address (json-string)
1731 - "family": address family (json-string)
1732          - Possible values: "ipv4", "ipv6", "unix", "unknown"
1733 - "service": client's port number (json-string)
1734 - "x509_dname": TLS dname (json-string, optional)
1735 - "sasl_username": SASL username (json-string, optional)
1736
1737 Example:
1738
1739 -> { "execute": "query-vnc" }
1740 <- {
1741       "return":{
1742          "enabled":true,
1743          "host":"0.0.0.0",
1744          "service":"50402",
1745          "auth":"vnc",
1746          "family":"ipv4",
1747          "clients":[
1748             {
1749                "host":"127.0.0.1",
1750                "service":"50401",
1751                "family":"ipv4"
1752             }
1753          ]
1754       }
1755    }
1756
1757 EQMP
1758
1759     {
1760         .name       = "query-vnc",
1761         .args_type  = "",
1762         .mhandler.cmd_new = qmp_marshal_input_query_vnc,
1763     },
1764
1765 SQMP
1766 query-spice
1767 -----------
1768
1769 Show SPICE server information.
1770
1771 Return a json-object with server information. Connected clients are returned
1772 as a json-array of json-objects.
1773
1774 The main json-object contains the following:
1775
1776 - "enabled": true or false (json-bool)
1777 - "host": server's IP address (json-string)
1778 - "port": server's port number (json-int, optional)
1779 - "tls-port": server's port number (json-int, optional)
1780 - "auth": authentication method (json-string)
1781          - Possible values: "none", "spice"
1782 - "channels": a json-array of all active channels clients
1783
1784 Channels are described by a json-object, each one contain the following:
1785
1786 - "host": client's IP address (json-string)
1787 - "family": address family (json-string)
1788          - Possible values: "ipv4", "ipv6", "unix", "unknown"
1789 - "port": client's port number (json-string)
1790 - "connection-id": spice connection id.  All channels with the same id
1791                    belong to the same spice session (json-int)
1792 - "channel-type": channel type.  "1" is the main control channel, filter for
1793                   this one if you want track spice sessions only (json-int)
1794 - "channel-id": channel id.  Usually "0", might be different needed when
1795                 multiple channels of the same type exist, such as multiple
1796                 display channels in a multihead setup (json-int)
1797 - "tls": whevener the channel is encrypted (json-bool)
1798
1799 Example:
1800
1801 -> { "execute": "query-spice" }
1802 <- {
1803       "return": {
1804          "enabled": true,
1805          "auth": "spice",
1806          "port": 5920,
1807          "tls-port": 5921,
1808          "host": "0.0.0.0",
1809          "channels": [
1810             {
1811                "port": "54924",
1812                "family": "ipv4",
1813                "channel-type": 1,
1814                "connection-id": 1804289383,
1815                "host": "127.0.0.1",
1816                "channel-id": 0,
1817                "tls": true
1818             },
1819             {
1820                "port": "36710",
1821                "family": "ipv4",
1822                "channel-type": 4,
1823                "connection-id": 1804289383,
1824                "host": "127.0.0.1",
1825                "channel-id": 0,
1826                "tls": false
1827             },
1828             [ ... more channels follow ... ]
1829          ]
1830       }
1831    }
1832
1833 EQMP
1834
1835 #if defined(CONFIG_SPICE)
1836     {
1837         .name       = "query-spice",
1838         .args_type  = "",
1839         .mhandler.cmd_new = qmp_marshal_input_query_spice,
1840     },
1841 #endif
1842
1843 SQMP
1844 query-name
1845 ----------
1846
1847 Show VM name.
1848
1849 Return a json-object with the following information:
1850
1851 - "name": VM's name (json-string, optional)
1852
1853 Example:
1854
1855 -> { "execute": "query-name" }
1856 <- { "return": { "name": "qemu-name" } }
1857
1858 EQMP
1859
1860     {
1861         .name       = "query-name",
1862         .args_type  = "",
1863         .mhandler.cmd_new = qmp_marshal_input_query_name,
1864     },
1865
1866 SQMP
1867 query-uuid
1868 ----------
1869
1870 Show VM UUID.
1871
1872 Return a json-object with the following information:
1873
1874 - "UUID": Universally Unique Identifier (json-string)
1875
1876 Example:
1877
1878 -> { "execute": "query-uuid" }
1879 <- { "return": { "UUID": "550e8400-e29b-41d4-a716-446655440000" } }
1880
1881 EQMP
1882
1883     {
1884         .name       = "query-uuid",
1885         .args_type  = "",
1886         .mhandler.cmd_new = qmp_marshal_input_query_uuid,
1887     },
1888
1889 SQMP
1890 query-migrate
1891 -------------
1892
1893 Migration status.
1894
1895 Return a json-object. If migration is active there will be another json-object
1896 with RAM migration status and if block migration is active another one with
1897 block migration status.
1898
1899 The main json-object contains the following:
1900
1901 - "status": migration status (json-string)
1902      - Possible values: "active", "completed", "failed", "cancelled"
1903 - "ram": only present if "status" is "active", it is a json-object with the
1904   following RAM information (in bytes):
1905          - "transferred": amount transferred (json-int)
1906          - "remaining": amount remaining (json-int)
1907          - "total": total (json-int)
1908 - "disk": only present if "status" is "active" and it is a block migration,
1909   it is a json-object with the following disk information (in bytes):
1910          - "transferred": amount transferred (json-int)
1911          - "remaining": amount remaining (json-int)
1912          - "total": total (json-int)
1913
1914 Examples:
1915
1916 1. Before the first migration
1917
1918 -> { "execute": "query-migrate" }
1919 <- { "return": {} }
1920
1921 2. Migration is done and has succeeded
1922
1923 -> { "execute": "query-migrate" }
1924 <- { "return": { "status": "completed" } }
1925
1926 3. Migration is done and has failed
1927
1928 -> { "execute": "query-migrate" }
1929 <- { "return": { "status": "failed" } }
1930
1931 4. Migration is being performed and is not a block migration:
1932
1933 -> { "execute": "query-migrate" }
1934 <- {
1935       "return":{
1936          "status":"active",
1937          "ram":{
1938             "transferred":123,
1939             "remaining":123,
1940             "total":246
1941          }
1942       }
1943    }
1944
1945 5. Migration is being performed and is a block migration:
1946
1947 -> { "execute": "query-migrate" }
1948 <- {
1949       "return":{
1950          "status":"active",
1951          "ram":{
1952             "total":1057024,
1953             "remaining":1053304,
1954             "transferred":3720
1955          },
1956          "disk":{
1957             "total":20971520,
1958             "remaining":20880384,
1959             "transferred":91136
1960          }
1961       }
1962    }
1963
1964 EQMP
1965
1966     {
1967         .name       = "query-migrate",
1968         .args_type  = "",
1969         .mhandler.cmd_new = qmp_marshal_input_query_migrate,
1970     },
1971
1972 SQMP
1973 query-balloon
1974 -------------
1975
1976 Show balloon information.
1977
1978 Make an asynchronous request for balloon info. When the request completes a
1979 json-object will be returned containing the following data:
1980
1981 - "actual": current balloon value in bytes (json-int)
1982 - "mem_swapped_in": Amount of memory swapped in bytes (json-int, optional)
1983 - "mem_swapped_out": Amount of memory swapped out in bytes (json-int, optional)
1984 - "major_page_faults": Number of major faults (json-int, optional)
1985 - "minor_page_faults": Number of minor faults (json-int, optional)
1986 - "free_mem": Total amount of free and unused memory in
1987               bytes (json-int, optional)
1988 - "total_mem": Total amount of available memory in bytes (json-int, optional)
1989
1990 Example:
1991
1992 -> { "execute": "query-balloon" }
1993 <- {
1994       "return":{
1995          "actual":1073741824,
1996          "mem_swapped_in":0,
1997          "mem_swapped_out":0,
1998          "major_page_faults":142,
1999          "minor_page_faults":239245,
2000          "free_mem":1014185984,
2001          "total_mem":1044668416
2002       }
2003    }
2004
2005 EQMP
2006
2007     {
2008         .name       = "query-balloon",
2009         .args_type  = "",
2010         .mhandler.cmd_new = qmp_marshal_input_query_balloon,
2011     },
2012
2013     {
2014         .name       = "qom-list",
2015         .args_type  = "path:s",
2016         .mhandler.cmd_new = qmp_marshal_input_qom_list,
2017     },
2018
2019     {
2020         .name       = "qom-set",
2021         .args_type  = "path:s,property:s,opts:O",
2022         .mhandler.cmd_new = qmp_qom_set,
2023     },
2024
2025     {
2026         .name       = "qom-get",
2027         .args_type  = "path:s,property:s",
2028         .mhandler.cmd_new = qmp_qom_get,
2029     },