qemu-ga: add guest-fstrim command
[qemu/opensuse.git] / hw / pc.c
blobc7e9ab3ee139666c645cfead073f521b557ff8d2
1 /*
2 * QEMU PC System Emulator
4 * Copyright (c) 2003-2004 Fabrice Bellard
6 * Permission is hereby granted, free of charge, to any person obtaining a copy
7 * of this software and associated documentation files (the "Software"), to deal
8 * in the Software without restriction, including without limitation the rights
9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10 * copies of the Software, and to permit persons to whom the Software is
11 * furnished to do so, subject to the following conditions:
13 * The above copyright notice and this permission notice shall be included in
14 * all copies or substantial portions of the Software.
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
22 * THE SOFTWARE.
24 #include "hw.h"
25 #include "pc.h"
26 #include "apic.h"
27 #include "fdc.h"
28 #include "ide.h"
29 #include "pci.h"
30 #include "vmware_vga.h"
31 #include "monitor.h"
32 #include "fw_cfg.h"
33 #include "hpet_emul.h"
34 #include "smbios.h"
35 #include "loader.h"
36 #include "elf.h"
37 #include "multiboot.h"
38 #include "mc146818rtc.h"
39 #include "i8254.h"
40 #include "pcspk.h"
41 #include "msi.h"
42 #include "sysbus.h"
43 #include "sysemu.h"
44 #include "kvm.h"
45 #include "xen.h"
46 #include "blockdev.h"
47 #include "ui/qemu-spice.h"
48 #include "memory.h"
49 #include "exec-memory.h"
50 #include "arch_init.h"
52 /* output Bochs bios info messages */
53 //#define DEBUG_BIOS
55 /* debug PC/ISA interrupts */
56 //#define DEBUG_IRQ
58 #ifdef DEBUG_IRQ
59 #define DPRINTF(fmt, ...) \
60 do { printf("CPUIRQ: " fmt , ## __VA_ARGS__); } while (0)
61 #else
62 #define DPRINTF(fmt, ...)
63 #endif
65 /* Leave a chunk of memory at the top of RAM for the BIOS ACPI tables. */
66 #define ACPI_DATA_SIZE 0x10000
67 #define BIOS_CFG_IOPORT 0x510
68 #define FW_CFG_ACPI_TABLES (FW_CFG_ARCH_LOCAL + 0)
69 #define FW_CFG_SMBIOS_ENTRIES (FW_CFG_ARCH_LOCAL + 1)
70 #define FW_CFG_IRQ0_OVERRIDE (FW_CFG_ARCH_LOCAL + 2)
71 #define FW_CFG_E820_TABLE (FW_CFG_ARCH_LOCAL + 3)
72 #define FW_CFG_HPET (FW_CFG_ARCH_LOCAL + 4)
74 #define MSI_ADDR_BASE 0xfee00000
76 #define E820_NR_ENTRIES 16
78 struct e820_entry {
79 uint64_t address;
80 uint64_t length;
81 uint32_t type;
82 } QEMU_PACKED __attribute((__aligned__(4)));
84 struct e820_table {
85 uint32_t count;
86 struct e820_entry entry[E820_NR_ENTRIES];
87 } QEMU_PACKED __attribute((__aligned__(4)));
89 static struct e820_table e820_table;
90 struct hpet_fw_config hpet_cfg = {.count = UINT8_MAX};
92 void gsi_handler(void *opaque, int n, int level)
94 GSIState *s = opaque;
96 DPRINTF("pc: %s GSI %d\n", level ? "raising" : "lowering", n);
97 if (n < ISA_NUM_IRQS) {
98 qemu_set_irq(s->i8259_irq[n], level);
100 qemu_set_irq(s->ioapic_irq[n], level);
103 static void ioport80_write(void *opaque, uint32_t addr, uint32_t data)
107 /* MSDOS compatibility mode FPU exception support */
108 static qemu_irq ferr_irq;
110 void pc_register_ferr_irq(qemu_irq irq)
112 ferr_irq = irq;
115 /* XXX: add IGNNE support */
116 void cpu_set_ferr(CPUX86State *s)
118 qemu_irq_raise(ferr_irq);
121 static void ioportF0_write(void *opaque, uint32_t addr, uint32_t data)
123 qemu_irq_lower(ferr_irq);
126 /* TSC handling */
127 uint64_t cpu_get_tsc(CPUX86State *env)
129 return cpu_get_ticks();
132 /* SMM support */
134 static cpu_set_smm_t smm_set;
135 static void *smm_arg;
137 void cpu_smm_register(cpu_set_smm_t callback, void *arg)
139 assert(smm_set == NULL);
140 assert(smm_arg == NULL);
141 smm_set = callback;
142 smm_arg = arg;
145 void cpu_smm_update(CPUX86State *env)
147 if (smm_set && smm_arg && env == first_cpu)
148 smm_set(!!(env->hflags & HF_SMM_MASK), smm_arg);
152 /* IRQ handling */
153 int cpu_get_pic_interrupt(CPUX86State *env)
155 int intno;
157 intno = apic_get_interrupt(env->apic_state);
158 if (intno >= 0) {
159 return intno;
161 /* read the irq from the PIC */
162 if (!apic_accept_pic_intr(env->apic_state)) {
163 return -1;
166 intno = pic_read_irq(isa_pic);
167 return intno;
170 static void pic_irq_request(void *opaque, int irq, int level)
172 CPUX86State *env = first_cpu;
174 DPRINTF("pic_irqs: %s irq %d\n", level? "raise" : "lower", irq);
175 if (env->apic_state) {
176 while (env) {
177 if (apic_accept_pic_intr(env->apic_state)) {
178 apic_deliver_pic_intr(env->apic_state, level);
180 env = env->next_cpu;
182 } else {
183 if (level)
184 cpu_interrupt(env, CPU_INTERRUPT_HARD);
185 else
186 cpu_reset_interrupt(env, CPU_INTERRUPT_HARD);
190 /* PC cmos mappings */
192 #define REG_EQUIPMENT_BYTE 0x14
194 static int cmos_get_fd_drive_type(FDriveType fd0)
196 int val;
198 switch (fd0) {
199 case FDRIVE_DRV_144:
200 /* 1.44 Mb 3"5 drive */
201 val = 4;
202 break;
203 case FDRIVE_DRV_288:
204 /* 2.88 Mb 3"5 drive */
205 val = 5;
206 break;
207 case FDRIVE_DRV_120:
208 /* 1.2 Mb 5"5 drive */
209 val = 2;
210 break;
211 case FDRIVE_DRV_NONE:
212 default:
213 val = 0;
214 break;
216 return val;
219 static void cmos_init_hd(int type_ofs, int info_ofs, BlockDriverState *hd,
220 ISADevice *s)
222 int cylinders, heads, sectors;
223 bdrv_get_geometry_hint(hd, &cylinders, &heads, &sectors);
224 rtc_set_memory(s, type_ofs, 47);
225 rtc_set_memory(s, info_ofs, cylinders);
226 rtc_set_memory(s, info_ofs + 1, cylinders >> 8);
227 rtc_set_memory(s, info_ofs + 2, heads);
228 rtc_set_memory(s, info_ofs + 3, 0xff);
229 rtc_set_memory(s, info_ofs + 4, 0xff);
230 rtc_set_memory(s, info_ofs + 5, 0xc0 | ((heads > 8) << 3));
231 rtc_set_memory(s, info_ofs + 6, cylinders);
232 rtc_set_memory(s, info_ofs + 7, cylinders >> 8);
233 rtc_set_memory(s, info_ofs + 8, sectors);
236 /* convert boot_device letter to something recognizable by the bios */
237 static int boot_device2nibble(char boot_device)
239 switch(boot_device) {
240 case 'a':
241 case 'b':
242 return 0x01; /* floppy boot */
243 case 'c':
244 return 0x02; /* hard drive boot */
245 case 'd':
246 return 0x03; /* CD-ROM boot */
247 case 'n':
248 return 0x04; /* Network boot */
250 return 0;
253 static int set_boot_dev(ISADevice *s, const char *boot_device, int fd_bootchk)
255 #define PC_MAX_BOOT_DEVICES 3
256 int nbds, bds[3] = { 0, };
257 int i;
259 nbds = strlen(boot_device);
260 if (nbds > PC_MAX_BOOT_DEVICES) {
261 error_report("Too many boot devices for PC");
262 return(1);
264 for (i = 0; i < nbds; i++) {
265 bds[i] = boot_device2nibble(boot_device[i]);
266 if (bds[i] == 0) {
267 error_report("Invalid boot device for PC: '%c'",
268 boot_device[i]);
269 return(1);
272 rtc_set_memory(s, 0x3d, (bds[1] << 4) | bds[0]);
273 rtc_set_memory(s, 0x38, (bds[2] << 4) | (fd_bootchk ? 0x0 : 0x1));
274 return(0);
277 static int pc_boot_set(void *opaque, const char *boot_device)
279 return set_boot_dev(opaque, boot_device, 0);
282 typedef struct pc_cmos_init_late_arg {
283 ISADevice *rtc_state;
284 BusState *idebus0, *idebus1;
285 } pc_cmos_init_late_arg;
287 static void pc_cmos_init_late(void *opaque)
289 pc_cmos_init_late_arg *arg = opaque;
290 ISADevice *s = arg->rtc_state;
291 int val;
292 BlockDriverState *hd_table[4];
293 int i;
295 ide_get_bs(hd_table, arg->idebus0);
296 ide_get_bs(hd_table + 2, arg->idebus1);
298 rtc_set_memory(s, 0x12, (hd_table[0] ? 0xf0 : 0) | (hd_table[1] ? 0x0f : 0));
299 if (hd_table[0])
300 cmos_init_hd(0x19, 0x1b, hd_table[0], s);
301 if (hd_table[1])
302 cmos_init_hd(0x1a, 0x24, hd_table[1], s);
304 val = 0;
305 for (i = 0; i < 4; i++) {
306 if (hd_table[i]) {
307 int cylinders, heads, sectors, translation;
308 /* NOTE: bdrv_get_geometry_hint() returns the physical
309 geometry. It is always such that: 1 <= sects <= 63, 1
310 <= heads <= 16, 1 <= cylinders <= 16383. The BIOS
311 geometry can be different if a translation is done. */
312 translation = bdrv_get_translation_hint(hd_table[i]);
313 if (translation == BIOS_ATA_TRANSLATION_AUTO) {
314 bdrv_get_geometry_hint(hd_table[i], &cylinders, &heads, &sectors);
315 if (cylinders <= 1024 && heads <= 16 && sectors <= 63) {
316 /* No translation. */
317 translation = 0;
318 } else {
319 /* LBA translation. */
320 translation = 1;
322 } else {
323 translation--;
325 val |= translation << (i * 2);
328 rtc_set_memory(s, 0x39, val);
330 qemu_unregister_reset(pc_cmos_init_late, opaque);
333 void pc_cmos_init(ram_addr_t ram_size, ram_addr_t above_4g_mem_size,
334 const char *boot_device,
335 ISADevice *floppy, BusState *idebus0, BusState *idebus1,
336 ISADevice *s)
338 int val, nb, nb_heads, max_track, last_sect, i;
339 FDriveType fd_type[2] = { FDRIVE_DRV_NONE, FDRIVE_DRV_NONE };
340 FDriveRate rate;
341 BlockDriverState *fd[MAX_FD];
342 static pc_cmos_init_late_arg arg;
344 /* various important CMOS locations needed by PC/Bochs bios */
346 /* memory size */
347 val = 640; /* base memory in K */
348 rtc_set_memory(s, 0x15, val);
349 rtc_set_memory(s, 0x16, val >> 8);
351 val = (ram_size / 1024) - 1024;
352 if (val > 65535)
353 val = 65535;
354 rtc_set_memory(s, 0x17, val);
355 rtc_set_memory(s, 0x18, val >> 8);
356 rtc_set_memory(s, 0x30, val);
357 rtc_set_memory(s, 0x31, val >> 8);
359 if (above_4g_mem_size) {
360 rtc_set_memory(s, 0x5b, (unsigned int)above_4g_mem_size >> 16);
361 rtc_set_memory(s, 0x5c, (unsigned int)above_4g_mem_size >> 24);
362 rtc_set_memory(s, 0x5d, (uint64_t)above_4g_mem_size >> 32);
365 if (ram_size > (16 * 1024 * 1024))
366 val = (ram_size / 65536) - ((16 * 1024 * 1024) / 65536);
367 else
368 val = 0;
369 if (val > 65535)
370 val = 65535;
371 rtc_set_memory(s, 0x34, val);
372 rtc_set_memory(s, 0x35, val >> 8);
374 /* set the number of CPU */
375 rtc_set_memory(s, 0x5f, smp_cpus - 1);
377 /* set boot devices, and disable floppy signature check if requested */
378 if (set_boot_dev(s, boot_device, fd_bootchk)) {
379 exit(1);
382 /* floppy type */
383 if (floppy) {
384 fdc_get_bs(fd, floppy);
385 for (i = 0; i < 2; i++) {
386 if (fd[i]) {
387 bdrv_get_floppy_geometry_hint(fd[i], &nb_heads, &max_track,
388 &last_sect, FDRIVE_DRV_NONE,
389 &fd_type[i], &rate);
393 val = (cmos_get_fd_drive_type(fd_type[0]) << 4) |
394 cmos_get_fd_drive_type(fd_type[1]);
395 rtc_set_memory(s, 0x10, val);
397 val = 0;
398 nb = 0;
399 if (fd_type[0] < FDRIVE_DRV_NONE) {
400 nb++;
402 if (fd_type[1] < FDRIVE_DRV_NONE) {
403 nb++;
405 switch (nb) {
406 case 0:
407 break;
408 case 1:
409 val |= 0x01; /* 1 drive, ready for boot */
410 break;
411 case 2:
412 val |= 0x41; /* 2 drives, ready for boot */
413 break;
415 val |= 0x02; /* FPU is there */
416 val |= 0x04; /* PS/2 mouse installed */
417 rtc_set_memory(s, REG_EQUIPMENT_BYTE, val);
419 /* hard drives */
420 arg.rtc_state = s;
421 arg.idebus0 = idebus0;
422 arg.idebus1 = idebus1;
423 qemu_register_reset(pc_cmos_init_late, &arg);
426 /* port 92 stuff: could be split off */
427 typedef struct Port92State {
428 ISADevice dev;
429 MemoryRegion io;
430 uint8_t outport;
431 qemu_irq *a20_out;
432 } Port92State;
434 static void port92_write(void *opaque, uint32_t addr, uint32_t val)
436 Port92State *s = opaque;
438 DPRINTF("port92: write 0x%02x\n", val);
439 s->outport = val;
440 qemu_set_irq(*s->a20_out, (val >> 1) & 1);
441 if (val & 1) {
442 qemu_system_reset_request();
446 static uint32_t port92_read(void *opaque, uint32_t addr)
448 Port92State *s = opaque;
449 uint32_t ret;
451 ret = s->outport;
452 DPRINTF("port92: read 0x%02x\n", ret);
453 return ret;
456 static void port92_init(ISADevice *dev, qemu_irq *a20_out)
458 Port92State *s = DO_UPCAST(Port92State, dev, dev);
460 s->a20_out = a20_out;
463 static const VMStateDescription vmstate_port92_isa = {
464 .name = "port92",
465 .version_id = 1,
466 .minimum_version_id = 1,
467 .minimum_version_id_old = 1,
468 .fields = (VMStateField []) {
469 VMSTATE_UINT8(outport, Port92State),
470 VMSTATE_END_OF_LIST()
474 static void port92_reset(DeviceState *d)
476 Port92State *s = container_of(d, Port92State, dev.qdev);
478 s->outport &= ~1;
481 static const MemoryRegionPortio port92_portio[] = {
482 { 0, 1, 1, .read = port92_read, .write = port92_write },
483 PORTIO_END_OF_LIST(),
486 static const MemoryRegionOps port92_ops = {
487 .old_portio = port92_portio
490 static int port92_initfn(ISADevice *dev)
492 Port92State *s = DO_UPCAST(Port92State, dev, dev);
494 memory_region_init_io(&s->io, &port92_ops, s, "port92", 1);
495 isa_register_ioport(dev, &s->io, 0x92);
497 s->outport = 0;
498 return 0;
501 static void port92_class_initfn(ObjectClass *klass, void *data)
503 DeviceClass *dc = DEVICE_CLASS(klass);
504 ISADeviceClass *ic = ISA_DEVICE_CLASS(klass);
505 ic->init = port92_initfn;
506 dc->no_user = 1;
507 dc->reset = port92_reset;
508 dc->vmsd = &vmstate_port92_isa;
511 static TypeInfo port92_info = {
512 .name = "port92",
513 .parent = TYPE_ISA_DEVICE,
514 .instance_size = sizeof(Port92State),
515 .class_init = port92_class_initfn,
518 static void port92_register_types(void)
520 type_register_static(&port92_info);
523 type_init(port92_register_types)
525 static void handle_a20_line_change(void *opaque, int irq, int level)
527 CPUX86State *cpu = opaque;
529 /* XXX: send to all CPUs ? */
530 /* XXX: add logic to handle multiple A20 line sources */
531 cpu_x86_set_a20(cpu, level);
534 /***********************************************************/
535 /* Bochs BIOS debug ports */
537 static void bochs_bios_write(void *opaque, uint32_t addr, uint32_t val)
539 static const char shutdown_str[8] = "Shutdown";
540 static int shutdown_index = 0;
542 switch(addr) {
543 /* Bochs BIOS messages */
544 case 0x400:
545 case 0x401:
546 /* used to be panic, now unused */
547 break;
548 case 0x402:
549 case 0x403:
550 #ifdef DEBUG_BIOS
551 fprintf(stderr, "%c", val);
552 #endif
553 break;
554 case 0x8900:
555 /* same as Bochs power off */
556 if (val == shutdown_str[shutdown_index]) {
557 shutdown_index++;
558 if (shutdown_index == 8) {
559 shutdown_index = 0;
560 qemu_system_shutdown_request();
562 } else {
563 shutdown_index = 0;
565 break;
567 /* LGPL'ed VGA BIOS messages */
568 case 0x501:
569 case 0x502:
570 exit((val << 1) | 1);
571 case 0x500:
572 case 0x503:
573 #ifdef DEBUG_BIOS
574 fprintf(stderr, "%c", val);
575 #endif
576 break;
580 int e820_add_entry(uint64_t address, uint64_t length, uint32_t type)
582 int index = le32_to_cpu(e820_table.count);
583 struct e820_entry *entry;
585 if (index >= E820_NR_ENTRIES)
586 return -EBUSY;
587 entry = &e820_table.entry[index++];
589 entry->address = cpu_to_le64(address);
590 entry->length = cpu_to_le64(length);
591 entry->type = cpu_to_le32(type);
593 e820_table.count = cpu_to_le32(index);
594 return index;
597 static void *bochs_bios_init(void)
599 void *fw_cfg;
600 uint8_t *smbios_table;
601 size_t smbios_len;
602 uint64_t *numa_fw_cfg;
603 int i, j;
605 register_ioport_write(0x400, 1, 2, bochs_bios_write, NULL);
606 register_ioport_write(0x401, 1, 2, bochs_bios_write, NULL);
607 register_ioport_write(0x402, 1, 1, bochs_bios_write, NULL);
608 register_ioport_write(0x403, 1, 1, bochs_bios_write, NULL);
609 register_ioport_write(0x8900, 1, 1, bochs_bios_write, NULL);
611 register_ioport_write(0x501, 1, 1, bochs_bios_write, NULL);
612 register_ioport_write(0x501, 1, 2, bochs_bios_write, NULL);
613 register_ioport_write(0x502, 1, 2, bochs_bios_write, NULL);
614 register_ioport_write(0x500, 1, 1, bochs_bios_write, NULL);
615 register_ioport_write(0x503, 1, 1, bochs_bios_write, NULL);
617 fw_cfg = fw_cfg_init(BIOS_CFG_IOPORT, BIOS_CFG_IOPORT + 1, 0, 0);
619 fw_cfg_add_i32(fw_cfg, FW_CFG_ID, 1);
620 fw_cfg_add_i64(fw_cfg, FW_CFG_RAM_SIZE, (uint64_t)ram_size);
621 fw_cfg_add_bytes(fw_cfg, FW_CFG_ACPI_TABLES, (uint8_t *)acpi_tables,
622 acpi_tables_len);
623 fw_cfg_add_i32(fw_cfg, FW_CFG_IRQ0_OVERRIDE, kvm_allows_irq0_override());
625 smbios_table = smbios_get_table(&smbios_len);
626 if (smbios_table)
627 fw_cfg_add_bytes(fw_cfg, FW_CFG_SMBIOS_ENTRIES,
628 smbios_table, smbios_len);
629 fw_cfg_add_bytes(fw_cfg, FW_CFG_E820_TABLE, (uint8_t *)&e820_table,
630 sizeof(struct e820_table));
632 fw_cfg_add_bytes(fw_cfg, FW_CFG_HPET, (uint8_t *)&hpet_cfg,
633 sizeof(struct hpet_fw_config));
634 /* allocate memory for the NUMA channel: one (64bit) word for the number
635 * of nodes, one word for each VCPU->node and one word for each node to
636 * hold the amount of memory.
638 numa_fw_cfg = g_malloc0((1 + max_cpus + nb_numa_nodes) * 8);
639 numa_fw_cfg[0] = cpu_to_le64(nb_numa_nodes);
640 for (i = 0; i < max_cpus; i++) {
641 for (j = 0; j < nb_numa_nodes; j++) {
642 if (node_cpumask[j] & (1 << i)) {
643 numa_fw_cfg[i + 1] = cpu_to_le64(j);
644 break;
648 for (i = 0; i < nb_numa_nodes; i++) {
649 numa_fw_cfg[max_cpus + 1 + i] = cpu_to_le64(node_mem[i]);
651 fw_cfg_add_bytes(fw_cfg, FW_CFG_NUMA, (uint8_t *)numa_fw_cfg,
652 (1 + max_cpus + nb_numa_nodes) * 8);
654 return fw_cfg;
657 static long get_file_size(FILE *f)
659 long where, size;
661 /* XXX: on Unix systems, using fstat() probably makes more sense */
663 where = ftell(f);
664 fseek(f, 0, SEEK_END);
665 size = ftell(f);
666 fseek(f, where, SEEK_SET);
668 return size;
671 static void load_linux(void *fw_cfg,
672 const char *kernel_filename,
673 const char *initrd_filename,
674 const char *kernel_cmdline,
675 target_phys_addr_t max_ram_size)
677 uint16_t protocol;
678 int setup_size, kernel_size, initrd_size = 0, cmdline_size;
679 uint32_t initrd_max;
680 uint8_t header[8192], *setup, *kernel, *initrd_data;
681 target_phys_addr_t real_addr, prot_addr, cmdline_addr, initrd_addr = 0;
682 FILE *f;
683 char *vmode;
685 /* Align to 16 bytes as a paranoia measure */
686 cmdline_size = (strlen(kernel_cmdline)+16) & ~15;
688 /* load the kernel header */
689 f = fopen(kernel_filename, "rb");
690 if (!f || !(kernel_size = get_file_size(f)) ||
691 fread(header, 1, MIN(ARRAY_SIZE(header), kernel_size), f) !=
692 MIN(ARRAY_SIZE(header), kernel_size)) {
693 fprintf(stderr, "qemu: could not load kernel '%s': %s\n",
694 kernel_filename, strerror(errno));
695 exit(1);
698 /* kernel protocol version */
699 #if 0
700 fprintf(stderr, "header magic: %#x\n", ldl_p(header+0x202));
701 #endif
702 if (ldl_p(header+0x202) == 0x53726448)
703 protocol = lduw_p(header+0x206);
704 else {
705 /* This looks like a multiboot kernel. If it is, let's stop
706 treating it like a Linux kernel. */
707 if (load_multiboot(fw_cfg, f, kernel_filename, initrd_filename,
708 kernel_cmdline, kernel_size, header))
709 return;
710 protocol = 0;
713 if (protocol < 0x200 || !(header[0x211] & 0x01)) {
714 /* Low kernel */
715 real_addr = 0x90000;
716 cmdline_addr = 0x9a000 - cmdline_size;
717 prot_addr = 0x10000;
718 } else if (protocol < 0x202) {
719 /* High but ancient kernel */
720 real_addr = 0x90000;
721 cmdline_addr = 0x9a000 - cmdline_size;
722 prot_addr = 0x100000;
723 } else {
724 /* High and recent kernel */
725 real_addr = 0x10000;
726 cmdline_addr = 0x20000;
727 prot_addr = 0x100000;
730 #if 0
731 fprintf(stderr,
732 "qemu: real_addr = 0x" TARGET_FMT_plx "\n"
733 "qemu: cmdline_addr = 0x" TARGET_FMT_plx "\n"
734 "qemu: prot_addr = 0x" TARGET_FMT_plx "\n",
735 real_addr,
736 cmdline_addr,
737 prot_addr);
738 #endif
740 /* highest address for loading the initrd */
741 if (protocol >= 0x203)
742 initrd_max = ldl_p(header+0x22c);
743 else
744 initrd_max = 0x37ffffff;
746 if (initrd_max >= max_ram_size-ACPI_DATA_SIZE)
747 initrd_max = max_ram_size-ACPI_DATA_SIZE-1;
749 fw_cfg_add_i32(fw_cfg, FW_CFG_CMDLINE_ADDR, cmdline_addr);
750 fw_cfg_add_i32(fw_cfg, FW_CFG_CMDLINE_SIZE, strlen(kernel_cmdline)+1);
751 fw_cfg_add_bytes(fw_cfg, FW_CFG_CMDLINE_DATA,
752 (uint8_t*)strdup(kernel_cmdline),
753 strlen(kernel_cmdline)+1);
755 if (protocol >= 0x202) {
756 stl_p(header+0x228, cmdline_addr);
757 } else {
758 stw_p(header+0x20, 0xA33F);
759 stw_p(header+0x22, cmdline_addr-real_addr);
762 /* handle vga= parameter */
763 vmode = strstr(kernel_cmdline, "vga=");
764 if (vmode) {
765 unsigned int video_mode;
766 /* skip "vga=" */
767 vmode += 4;
768 if (!strncmp(vmode, "normal", 6)) {
769 video_mode = 0xffff;
770 } else if (!strncmp(vmode, "ext", 3)) {
771 video_mode = 0xfffe;
772 } else if (!strncmp(vmode, "ask", 3)) {
773 video_mode = 0xfffd;
774 } else {
775 video_mode = strtol(vmode, NULL, 0);
777 stw_p(header+0x1fa, video_mode);
780 /* loader type */
781 /* High nybble = B reserved for QEMU; low nybble is revision number.
782 If this code is substantially changed, you may want to consider
783 incrementing the revision. */
784 if (protocol >= 0x200)
785 header[0x210] = 0xB0;
787 /* heap */
788 if (protocol >= 0x201) {
789 header[0x211] |= 0x80; /* CAN_USE_HEAP */
790 stw_p(header+0x224, cmdline_addr-real_addr-0x200);
793 /* load initrd */
794 if (initrd_filename) {
795 if (protocol < 0x200) {
796 fprintf(stderr, "qemu: linux kernel too old to load a ram disk\n");
797 exit(1);
800 initrd_size = get_image_size(initrd_filename);
801 if (initrd_size < 0) {
802 fprintf(stderr, "qemu: error reading initrd %s\n",
803 initrd_filename);
804 exit(1);
807 initrd_addr = (initrd_max-initrd_size) & ~4095;
809 initrd_data = g_malloc(initrd_size);
810 load_image(initrd_filename, initrd_data);
812 fw_cfg_add_i32(fw_cfg, FW_CFG_INITRD_ADDR, initrd_addr);
813 fw_cfg_add_i32(fw_cfg, FW_CFG_INITRD_SIZE, initrd_size);
814 fw_cfg_add_bytes(fw_cfg, FW_CFG_INITRD_DATA, initrd_data, initrd_size);
816 stl_p(header+0x218, initrd_addr);
817 stl_p(header+0x21c, initrd_size);
820 /* load kernel and setup */
821 setup_size = header[0x1f1];
822 if (setup_size == 0)
823 setup_size = 4;
824 setup_size = (setup_size+1)*512;
825 kernel_size -= setup_size;
827 setup = g_malloc(setup_size);
828 kernel = g_malloc(kernel_size);
829 fseek(f, 0, SEEK_SET);
830 if (fread(setup, 1, setup_size, f) != setup_size) {
831 fprintf(stderr, "fread() failed\n");
832 exit(1);
834 if (fread(kernel, 1, kernel_size, f) != kernel_size) {
835 fprintf(stderr, "fread() failed\n");
836 exit(1);
838 fclose(f);
839 memcpy(setup, header, MIN(sizeof(header), setup_size));
841 fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_ADDR, prot_addr);
842 fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_SIZE, kernel_size);
843 fw_cfg_add_bytes(fw_cfg, FW_CFG_KERNEL_DATA, kernel, kernel_size);
845 fw_cfg_add_i32(fw_cfg, FW_CFG_SETUP_ADDR, real_addr);
846 fw_cfg_add_i32(fw_cfg, FW_CFG_SETUP_SIZE, setup_size);
847 fw_cfg_add_bytes(fw_cfg, FW_CFG_SETUP_DATA, setup, setup_size);
849 option_rom[nb_option_roms].name = "linuxboot.bin";
850 option_rom[nb_option_roms].bootindex = 0;
851 nb_option_roms++;
854 #define NE2000_NB_MAX 6
856 static const int ne2000_io[NE2000_NB_MAX] = { 0x300, 0x320, 0x340, 0x360,
857 0x280, 0x380 };
858 static const int ne2000_irq[NE2000_NB_MAX] = { 9, 10, 11, 3, 4, 5 };
860 static const int parallel_io[MAX_PARALLEL_PORTS] = { 0x378, 0x278, 0x3bc };
861 static const int parallel_irq[MAX_PARALLEL_PORTS] = { 7, 7, 7 };
863 void pc_init_ne2k_isa(ISABus *bus, NICInfo *nd)
865 static int nb_ne2k = 0;
867 if (nb_ne2k == NE2000_NB_MAX)
868 return;
869 isa_ne2000_init(bus, ne2000_io[nb_ne2k],
870 ne2000_irq[nb_ne2k], nd);
871 nb_ne2k++;
874 int cpu_is_bsp(CPUX86State *env)
876 /* We hard-wire the BSP to the first CPU. */
877 return env->cpu_index == 0;
880 DeviceState *cpu_get_current_apic(void)
882 if (cpu_single_env) {
883 return cpu_single_env->apic_state;
884 } else {
885 return NULL;
889 static DeviceState *apic_init(void *env, uint8_t apic_id)
891 DeviceState *dev;
892 static int apic_mapped;
894 if (kvm_irqchip_in_kernel()) {
895 dev = qdev_create(NULL, "kvm-apic");
896 } else if (xen_enabled()) {
897 dev = qdev_create(NULL, "xen-apic");
898 } else {
899 dev = qdev_create(NULL, "apic");
902 qdev_prop_set_uint8(dev, "id", apic_id);
903 qdev_prop_set_ptr(dev, "cpu_env", env);
904 qdev_init_nofail(dev);
906 /* XXX: mapping more APICs at the same memory location */
907 if (apic_mapped == 0) {
908 /* NOTE: the APIC is directly connected to the CPU - it is not
909 on the global memory bus. */
910 /* XXX: what if the base changes? */
911 sysbus_mmio_map(sysbus_from_qdev(dev), 0, MSI_ADDR_BASE);
912 apic_mapped = 1;
915 return dev;
918 void pc_acpi_smi_interrupt(void *opaque, int irq, int level)
920 CPUX86State *s = opaque;
922 if (level) {
923 cpu_interrupt(s, CPU_INTERRUPT_SMI);
927 static void pc_cpu_reset(void *opaque)
929 X86CPU *cpu = opaque;
930 CPUX86State *env = &cpu->env;
932 cpu_reset(CPU(cpu));
933 env->halted = !cpu_is_bsp(env);
936 static X86CPU *pc_new_cpu(const char *cpu_model)
938 X86CPU *cpu;
939 CPUX86State *env;
941 cpu = cpu_x86_init(cpu_model);
942 if (cpu == NULL) {
943 fprintf(stderr, "Unable to find x86 CPU definition\n");
944 exit(1);
946 env = &cpu->env;
947 if ((env->cpuid_features & CPUID_APIC) || smp_cpus > 1) {
948 env->apic_state = apic_init(env, env->cpuid_apic_id);
950 qemu_register_reset(pc_cpu_reset, cpu);
951 pc_cpu_reset(cpu);
952 return cpu;
955 void pc_cpus_init(const char *cpu_model)
957 int i;
959 /* init CPUs */
960 if (cpu_model == NULL) {
961 #ifdef TARGET_X86_64
962 cpu_model = "qemu64";
963 #else
964 cpu_model = "qemu32";
965 #endif
968 for(i = 0; i < smp_cpus; i++) {
969 pc_new_cpu(cpu_model);
973 void *pc_memory_init(MemoryRegion *system_memory,
974 const char *kernel_filename,
975 const char *kernel_cmdline,
976 const char *initrd_filename,
977 ram_addr_t below_4g_mem_size,
978 ram_addr_t above_4g_mem_size,
979 MemoryRegion *rom_memory,
980 MemoryRegion **ram_memory)
982 int linux_boot, i;
983 MemoryRegion *ram, *option_rom_mr;
984 MemoryRegion *ram_below_4g, *ram_above_4g;
985 void *fw_cfg;
987 linux_boot = (kernel_filename != NULL);
989 /* Allocate RAM. We allocate it as a single memory region and use
990 * aliases to address portions of it, mostly for backwards compatibility
991 * with older qemus that used qemu_ram_alloc().
993 ram = g_malloc(sizeof(*ram));
994 memory_region_init_ram(ram, "pc.ram",
995 below_4g_mem_size + above_4g_mem_size);
996 vmstate_register_ram_global(ram);
997 *ram_memory = ram;
998 ram_below_4g = g_malloc(sizeof(*ram_below_4g));
999 memory_region_init_alias(ram_below_4g, "ram-below-4g", ram,
1000 0, below_4g_mem_size);
1001 memory_region_add_subregion(system_memory, 0, ram_below_4g);
1002 if (above_4g_mem_size > 0) {
1003 ram_above_4g = g_malloc(sizeof(*ram_above_4g));
1004 memory_region_init_alias(ram_above_4g, "ram-above-4g", ram,
1005 below_4g_mem_size, above_4g_mem_size);
1006 memory_region_add_subregion(system_memory, 0x100000000ULL,
1007 ram_above_4g);
1011 /* Initialize PC system firmware */
1012 pc_system_firmware_init(rom_memory);
1014 option_rom_mr = g_malloc(sizeof(*option_rom_mr));
1015 memory_region_init_ram(option_rom_mr, "pc.rom", PC_ROM_SIZE);
1016 vmstate_register_ram_global(option_rom_mr);
1017 memory_region_add_subregion_overlap(rom_memory,
1018 PC_ROM_MIN_VGA,
1019 option_rom_mr,
1022 fw_cfg = bochs_bios_init();
1023 rom_set_fw(fw_cfg);
1025 if (linux_boot) {
1026 load_linux(fw_cfg, kernel_filename, initrd_filename, kernel_cmdline, below_4g_mem_size);
1029 for (i = 0; i < nb_option_roms; i++) {
1030 rom_add_option(option_rom[i].name, option_rom[i].bootindex);
1032 return fw_cfg;
1035 qemu_irq *pc_allocate_cpu_irq(void)
1037 return qemu_allocate_irqs(pic_irq_request, NULL, 1);
1040 DeviceState *pc_vga_init(ISABus *isa_bus, PCIBus *pci_bus)
1042 DeviceState *dev = NULL;
1044 if (cirrus_vga_enabled) {
1045 if (pci_bus) {
1046 dev = pci_cirrus_vga_init(pci_bus);
1047 } else {
1048 dev = &isa_create_simple(isa_bus, "isa-cirrus-vga")->qdev;
1050 } else if (vmsvga_enabled) {
1051 if (pci_bus) {
1052 dev = pci_vmsvga_init(pci_bus);
1053 } else {
1054 fprintf(stderr, "%s: vmware_vga: no PCI bus\n", __FUNCTION__);
1056 #ifdef CONFIG_SPICE
1057 } else if (qxl_enabled) {
1058 if (pci_bus) {
1059 dev = &pci_create_simple(pci_bus, -1, "qxl-vga")->qdev;
1060 } else {
1061 fprintf(stderr, "%s: qxl: no PCI bus\n", __FUNCTION__);
1063 #endif
1064 } else if (std_vga_enabled) {
1065 if (pci_bus) {
1066 dev = pci_vga_init(pci_bus);
1067 } else {
1068 dev = isa_vga_init(isa_bus);
1072 return dev;
1075 static void cpu_request_exit(void *opaque, int irq, int level)
1077 CPUX86State *env = cpu_single_env;
1079 if (env && level) {
1080 cpu_exit(env);
1084 void pc_basic_device_init(ISABus *isa_bus, qemu_irq *gsi,
1085 ISADevice **rtc_state,
1086 ISADevice **floppy,
1087 bool no_vmport)
1089 int i;
1090 DriveInfo *fd[MAX_FD];
1091 DeviceState *hpet = NULL;
1092 int pit_isa_irq = 0;
1093 qemu_irq pit_alt_irq = NULL;
1094 qemu_irq rtc_irq = NULL;
1095 qemu_irq *a20_line;
1096 ISADevice *i8042, *port92, *vmmouse, *pit = NULL;
1097 qemu_irq *cpu_exit_irq;
1099 register_ioport_write(0x80, 1, 1, ioport80_write, NULL);
1101 register_ioport_write(0xf0, 1, 1, ioportF0_write, NULL);
1104 * Check if an HPET shall be created.
1106 * Without KVM_CAP_PIT_STATE2, we cannot switch off the in-kernel PIT
1107 * when the HPET wants to take over. Thus we have to disable the latter.
1109 if (!no_hpet && (!kvm_irqchip_in_kernel() || kvm_has_pit_state2())) {
1110 hpet = sysbus_try_create_simple("hpet", HPET_BASE, NULL);
1112 if (hpet) {
1113 for (i = 0; i < GSI_NUM_PINS; i++) {
1114 sysbus_connect_irq(sysbus_from_qdev(hpet), i, gsi[i]);
1116 pit_isa_irq = -1;
1117 pit_alt_irq = qdev_get_gpio_in(hpet, HPET_LEGACY_PIT_INT);
1118 rtc_irq = qdev_get_gpio_in(hpet, HPET_LEGACY_RTC_INT);
1121 *rtc_state = rtc_init(isa_bus, 2000, rtc_irq);
1123 qemu_register_boot_set(pc_boot_set, *rtc_state);
1125 if (!xen_enabled()) {
1126 if (kvm_irqchip_in_kernel()) {
1127 pit = kvm_pit_init(isa_bus, 0x40);
1128 } else {
1129 pit = pit_init(isa_bus, 0x40, pit_isa_irq, pit_alt_irq);
1131 if (hpet) {
1132 /* connect PIT to output control line of the HPET */
1133 qdev_connect_gpio_out(hpet, 0, qdev_get_gpio_in(&pit->qdev, 0));
1135 pcspk_init(isa_bus, pit);
1138 for(i = 0; i < MAX_SERIAL_PORTS; i++) {
1139 if (serial_hds[i]) {
1140 serial_isa_init(isa_bus, i, serial_hds[i]);
1144 for(i = 0; i < MAX_PARALLEL_PORTS; i++) {
1145 if (parallel_hds[i]) {
1146 parallel_init(isa_bus, i, parallel_hds[i]);
1150 a20_line = qemu_allocate_irqs(handle_a20_line_change, first_cpu, 2);
1151 i8042 = isa_create_simple(isa_bus, "i8042");
1152 i8042_setup_a20_line(i8042, &a20_line[0]);
1153 if (!no_vmport) {
1154 vmport_init(isa_bus);
1155 vmmouse = isa_try_create(isa_bus, "vmmouse");
1156 } else {
1157 vmmouse = NULL;
1159 if (vmmouse) {
1160 qdev_prop_set_ptr(&vmmouse->qdev, "ps2_mouse", i8042);
1161 qdev_init_nofail(&vmmouse->qdev);
1163 port92 = isa_create_simple(isa_bus, "port92");
1164 port92_init(port92, &a20_line[1]);
1166 cpu_exit_irq = qemu_allocate_irqs(cpu_request_exit, NULL, 1);
1167 DMA_init(0, cpu_exit_irq);
1169 for(i = 0; i < MAX_FD; i++) {
1170 fd[i] = drive_get(IF_FLOPPY, 0, i);
1172 *floppy = fdctrl_init_isa(isa_bus, fd);
1175 void pc_pci_device_init(PCIBus *pci_bus)
1177 int max_bus;
1178 int bus;
1180 max_bus = drive_get_max_bus(IF_SCSI);
1181 for (bus = 0; bus <= max_bus; bus++) {
1182 pci_create_simple(pci_bus, -1, "lsi53c895a");