hw/cbus.c

   1 /*
   2  * CBUS three-pin bus and the Retu / Betty / Tahvo / Vilma / Avilma /
   3  * Hinku / Vinku / Ahne / Pihi chips used in various Nokia platforms.
   4  * Based on reverse-engineering of a linux driver.
   5  *
   6  * Copyright (C) 2008 Nokia Corporation
   7  * Written by Andrzej Zaborowski <andrew@openedhand.com>
   8  *
   9  * This program is free software; you can redistribute it and/or
  10  * modify it under the terms of the GNU General Public License as
  11  * published by the Free Software Foundation; either version 2 or
  12  * (at your option) version 3 of the License.
  13  *
  14  * This program is distributed in the hope that it will be useful,
  15  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17  * GNU General Public License for more details.
  18  *
  19  * You should have received a copy of the GNU General Public License along
  20  * with this program; if not, see <http://www.gnu.org/licenses/>.
  21  */
  22
  23 #include "qemu-common.h"
  24 #include "irq.h"
  25 #include "devices.h"
  26 #include "sysemu/sysemu.h"
  27
  28 //#define DEBUG
  29
  30 typedef struct {
  31     void *opaque;
  32     void (*io)(void *opaque, int rw, int reg, uint16_t *val);
  33     int addr;
  34 } CBusSlave;
  35
  36 typedef struct {
  37     CBus cbus;
  38
  39     int sel;
  40     int dat;
  41     int clk;
  42     int bit;
  43     int dir;
  44     uint16_t val;
  45     qemu_irq dat_out;
  46
  47     int addr;
  48     int reg;
  49     int rw;
  50     enum {
  51         cbus_address,
  52         cbus_value,
  53     } cycle;
  54
  55     CBusSlave *slave[8];
  56 } CBusPriv;
  57
  58 static void cbus_io(CBusPriv *s)
  59 {
  60     if (s->slave[s->addr])
  61         s->slave[s->addr]->io(s->slave[s->addr]->opaque,
  62                         s->rw, s->reg, &s->val);
  63     else
  64         hw_error("%s: bad slave address %i\n", __FUNCTION__, s->addr);
  65 }
  66
  67 static void cbus_cycle(CBusPriv *s)
  68 {
  69     switch (s->cycle) {
  70     case cbus_address:
  71         s->addr = (s->val >> 6) & 7;
  72         s->rw =   (s->val >> 5) & 1;
  73         s->reg =  (s->val >> 0) & 0x1f;
  74
  75         s->cycle = cbus_value;
  76         s->bit = 15;
  77         s->dir = !s->rw;
  78         s->val = 0;
  79
  80         if (s->rw)
  81             cbus_io(s);
  82         break;
  83
  84     case cbus_value:
  85         if (!s->rw)
  86             cbus_io(s);
  87
  88         s->cycle = cbus_address;
  89         s->bit = 8;
  90         s->dir = 1;
  91         s->val = 0;
  92         break;
  93     }
  94 }
  95
  96 static void cbus_clk(void *opaque, int line, int level)
  97 {
  98     CBusPriv *s = (CBusPriv *) opaque;
  99
 100     if (!s->sel && level && !s->clk) {
 101         if (s->dir)
 102             s->val |= s->dat << (s->bit --);
 103         else
 104             qemu_set_irq(s->dat_out, (s->val >> (s->bit --)) & 1);
 105
 106         if (s->bit < 0)
 107             cbus_cycle(s);
 108     }
 109
 110     s->clk = level;
 111 }
 112
 113 static void cbus_dat(void *opaque, int line, int level)
 114 {
 115     CBusPriv *s = (CBusPriv *) opaque;
 116
 117     s->dat = level;
 118 }
 119
 120 static void cbus_sel(void *opaque, int line, int level)
 121 {
 122     CBusPriv *s = (CBusPriv *) opaque;
 123
 124     if (!level) {
 125         s->dir = 1;
 126         s->bit = 8;
 127         s->val = 0;
 128     }
 129
 130     s->sel = level;
 131 }
 132
 133 CBus *cbus_init(qemu_irq dat)
 134 {
 135     CBusPriv *s = (CBusPriv *) g_malloc0(sizeof(*s));
 136
 137     s->dat_out = dat;
 138     s->cbus.clk = qemu_allocate_irqs(cbus_clk, s, 1)[0];
 139     s->cbus.dat = qemu_allocate_irqs(cbus_dat, s, 1)[0];
 140     s->cbus.sel = qemu_allocate_irqs(cbus_sel, s, 1)[0];
 141
 142     s->sel = 1;
 143     s->clk = 0;
 144     s->dat = 0;
 145
 146     return &s->cbus;
 147 }
 148
 149 void cbus_attach(CBus *bus, void *slave_opaque)
 150 {
 151     CBusSlave *slave = (CBusSlave *) slave_opaque;
 152     CBusPriv *s = (CBusPriv *) bus;
 153
 154     s->slave[slave->addr] = slave;
 155 }
 156
 157 /* Retu/Vilma */
 158 typedef struct {
 159     uint16_t irqst;
 160     uint16_t irqen;
 161     uint16_t cc[2];
 162     int channel;
 163     uint16_t result[16];
 164     uint16_t sample;
 165     uint16_t status;
 166
 167     struct {
 168         uint16_t cal;
 169     } rtc;
 170
 171     int is_vilma;
 172     qemu_irq irq;
 173     CBusSlave cbus;
 174 } CBusRetu;
 175
 176 static void retu_interrupt_update(CBusRetu *s)
 177 {
 178     qemu_set_irq(s->irq, s->irqst & ~s->irqen);
 179 }
 180
 181 #define RETU_REG_ASICR          0x00    /* (RO) ASIC ID & revision */
 182 #define RETU_REG_IDR            0x01    /* (T)  Interrupt ID */
 183 #define RETU_REG_IMR            0x02    /* (RW) Interrupt mask */
 184 #define RETU_REG_RTCDSR         0x03    /* (RW) RTC seconds register */
 185 #define RETU_REG_RTCHMR         0x04    /* (RO) RTC hours and minutes reg */
 186 #define RETU_REG_RTCHMAR        0x05    /* (RW) RTC hours and minutes set reg */
 187 #define RETU_REG_RTCCALR        0x06    /* (RW) RTC calibration register */
 188 #define RETU_REG_ADCR           0x08    /* (RW) ADC result register */
 189 #define RETU_REG_ADCSCR         0x09    /* (RW) ADC sample control register */
 190 #define RETU_REG_AFCR           0x0a    /* (RW) AFC register */
 191 #define RETU_REG_ANTIFR         0x0b    /* (RW) AntiF register */
 192 #define RETU_REG_CALIBR         0x0c    /* (RW) CalibR register*/
 193 #define RETU_REG_CCR1           0x0d    /* (RW) Common control register 1 */
 194 #define RETU_REG_CCR2           0x0e    /* (RW) Common control register 2 */
 195 #define RETU_REG_RCTRL_CLR      0x0f    /* (T)  Regulator clear register */
 196 #define RETU_REG_RCTRL_SET      0x10    /* (T)  Regulator set register */
 197 #define RETU_REG_TXCR           0x11    /* (RW) TxC register */
 198 #define RETU_REG_STATUS         0x16    /* (RO) Status register */
 199 #define RETU_REG_WATCHDOG       0x17    /* (RW) Watchdog register */
 200 #define RETU_REG_AUDTXR         0x18    /* (RW) Audio Codec Tx register */
 201 #define RETU_REG_AUDPAR         0x19    /* (RW) AudioPA register */
 202 #define RETU_REG_AUDRXR1        0x1a    /* (RW) Audio receive register 1 */
 203 #define RETU_REG_AUDRXR2        0x1b    /* (RW) Audio receive register 2 */
 204 #define RETU_REG_SGR1           0x1c    /* (RW) */
 205 #define RETU_REG_SCR1           0x1d    /* (RW) */
 206 #define RETU_REG_SGR2           0x1e    /* (RW) */
 207 #define RETU_REG_SCR2           0x1f    /* (RW) */
 208
 209 /* Retu Interrupt sources */
 210 enum {
 211     retu_int_pwr        = 0,    /* Power button */
 212     retu_int_char       = 1,    /* Charger */
 213     retu_int_rtcs       = 2,    /* Seconds */
 214     retu_int_rtcm       = 3,    /* Minutes */
 215     retu_int_rtcd       = 4,    /* Days */
 216     retu_int_rtca       = 5,    /* Alarm */
 217     retu_int_hook       = 6,    /* Hook */
 218     retu_int_head       = 7,    /* Headset */
 219     retu_int_adcs       = 8,    /* ADC sample */
 220 };
 221
 222 /* Retu ADC channel wiring */
 223 enum {
 224     retu_adc_bsi        = 1,    /* BSI */
 225     retu_adc_batt_temp  = 2,    /* Battery temperature */
 226     retu_adc_chg_volt   = 3,    /* Charger voltage */
 227     retu_adc_head_det   = 4,    /* Headset detection */
 228     retu_adc_hook_det   = 5,    /* Hook detection */
 229     retu_adc_rf_gp      = 6,    /* RF GP */
 230     retu_adc_tx_det     = 7,    /* Wideband Tx detection */
 231     retu_adc_batt_volt  = 8,    /* Battery voltage */
 232     retu_adc_sens       = 10,   /* Light sensor */
 233     retu_adc_sens_temp  = 11,   /* Light sensor temperature */
 234     retu_adc_bbatt_volt = 12,   /* Backup battery voltage */
 235     retu_adc_self_temp  = 13,   /* RETU temperature */
 236 };
 237
 238 static inline uint16_t retu_read(CBusRetu *s, int reg)
 239 {
 240 #ifdef DEBUG
 241     printf("RETU read at %02x\n", reg);
 242 #endif
 243
 244     switch (reg) {
 245     case RETU_REG_ASICR:
 246         return 0x0215 | (s->is_vilma << 7);
 247
 248     case RETU_REG_IDR:  /* TODO: Or is this ffs(s->irqst)?  */
 249         return s->irqst;
 250
 251     case RETU_REG_IMR:
 252         return s->irqen;
 253
 254     case RETU_REG_RTCDSR:
 255     case RETU_REG_RTCHMR:
 256     case RETU_REG_RTCHMAR:
 257         /* TODO */
 258         return 0x0000;
 259
 260     case RETU_REG_RTCCALR:
 261         return s->rtc.cal;
 262
 263     case RETU_REG_ADCR:
 264         return (s->channel << 10) | s->result[s->channel];
 265     case RETU_REG_ADCSCR:
 266         return s->sample;
 267
 268     case RETU_REG_AFCR:
 269     case RETU_REG_ANTIFR:
 270     case RETU_REG_CALIBR:
 271         /* TODO */
 272         return 0x0000;
 273
 274     case RETU_REG_CCR1:
 275         return s->cc[0];
 276     case RETU_REG_CCR2:
 277         return s->cc[1];
 278
 279     case RETU_REG_RCTRL_CLR:
 280     case RETU_REG_RCTRL_SET:
 281     case RETU_REG_TXCR:
 282         /* TODO */
 283         return 0x0000;
 284
 285     case RETU_REG_STATUS:
 286         return s->status;
 287
 288     case RETU_REG_WATCHDOG:
 289     case RETU_REG_AUDTXR:
 290     case RETU_REG_AUDPAR:
 291     case RETU_REG_AUDRXR1:
 292     case RETU_REG_AUDRXR2:
 293     case RETU_REG_SGR1:
 294     case RETU_REG_SCR1:
 295     case RETU_REG_SGR2:
 296     case RETU_REG_SCR2:
 297         /* TODO */
 298         return 0x0000;
 299
 300     default:
 301         hw_error("%s: bad register %02x\n", __FUNCTION__, reg);
 302     }
 303 }
 304
 305 static inline void retu_write(CBusRetu *s, int reg, uint16_t val)
 306 {
 307 #ifdef DEBUG
 308     printf("RETU write of %04x at %02x\n", val, reg);
 309 #endif
 310
 311     switch (reg) {
 312     case RETU_REG_IDR:
 313         s->irqst ^= val;
 314         retu_interrupt_update(s);
 315         break;
 316
 317     case RETU_REG_IMR:
 318         s->irqen = val;
 319         retu_interrupt_update(s);
 320         break;
 321
 322     case RETU_REG_RTCDSR:
 323     case RETU_REG_RTCHMAR:
 324         /* TODO */
 325         break;
 326
 327     case RETU_REG_RTCCALR:
 328         s->rtc.cal = val;
 329         break;
 330
 331     case RETU_REG_ADCR:
 332         s->channel = (val >> 10) & 0xf;
 333         s->irqst |= 1 << retu_int_adcs;
 334         retu_interrupt_update(s);
 335         break;
 336     case RETU_REG_ADCSCR:
 337         s->sample &= ~val;
 338         break;
 339
 340     case RETU_REG_AFCR:
 341     case RETU_REG_ANTIFR:
 342     case RETU_REG_CALIBR:
 343
 344     case RETU_REG_CCR1:
 345         s->cc[0] = val;
 346         break;
 347     case RETU_REG_CCR2:
 348         s->cc[1] = val;
 349         break;
 350
 351     case RETU_REG_RCTRL_CLR:
 352     case RETU_REG_RCTRL_SET:
 353         /* TODO */
 354         break;
 355
 356     case RETU_REG_WATCHDOG:
 357         if (val == 0 && (s->cc[0] & 2))
 358             qemu_system_shutdown_request();
 359         break;
 360
 361     case RETU_REG_TXCR:
 362     case RETU_REG_AUDTXR:
 363     case RETU_REG_AUDPAR:
 364     case RETU_REG_AUDRXR1:
 365     case RETU_REG_AUDRXR2:
 366     case RETU_REG_SGR1:
 367     case RETU_REG_SCR1:
 368     case RETU_REG_SGR2:
 369     case RETU_REG_SCR2:
 370         /* TODO */
 371         break;
 372
 373     default:
 374         hw_error("%s: bad register %02x\n", __FUNCTION__, reg);
 375     }
 376 }
 377
 378 static void retu_io(void *opaque, int rw, int reg, uint16_t *val)
 379 {
 380     CBusRetu *s = (CBusRetu *) opaque;
 381
 382     if (rw)
 383         *val = retu_read(s, reg);
 384     else
 385         retu_write(s, reg, *val);
 386 }
 387
 388 void *retu_init(qemu_irq irq, int vilma)
 389 {
 390     CBusRetu *s = (CBusRetu *) g_malloc0(sizeof(*s));
 391
 392     s->irq = irq;
 393     s->irqen = 0xffff;
 394     s->irqst = 0x0000;
 395     s->status = 0x0020;
 396     s->is_vilma = !!vilma;
 397     s->rtc.cal = 0x01;
 398     s->result[retu_adc_bsi] = 0x3c2;
 399     s->result[retu_adc_batt_temp] = 0x0fc;
 400     s->result[retu_adc_chg_volt] = 0x165;
 401     s->result[retu_adc_head_det] = 123;
 402     s->result[retu_adc_hook_det] = 1023;
 403     s->result[retu_adc_rf_gp] = 0x11;
 404     s->result[retu_adc_tx_det] = 0x11;
 405     s->result[retu_adc_batt_volt] = 0x250;
 406     s->result[retu_adc_sens] = 2;
 407     s->result[retu_adc_sens_temp] = 0x11;
 408     s->result[retu_adc_bbatt_volt] = 0x3d0;
 409     s->result[retu_adc_self_temp] = 0x330;
 410
 411     s->cbus.opaque = s;
 412     s->cbus.io = retu_io;
 413     s->cbus.addr = 1;
 414
 415     return &s->cbus;
 416 }
 417
 418 void retu_key_event(void *retu, int state)
 419 {
 420     CBusSlave *slave = (CBusSlave *) retu;
 421     CBusRetu *s = (CBusRetu *) slave->opaque;
 422
 423     s->irqst |= 1 << retu_int_pwr;
 424     retu_interrupt_update(s);
 425
 426     if (state)
 427         s->status &= ~(1 << 5);
 428     else
 429         s->status |= 1 << 5;
 430 }
 431
 432 #if 0
 433 static void retu_head_event(void *retu, int state)
 434 {
 435     CBusSlave *slave = (CBusSlave *) retu;
 436     CBusRetu *s = (CBusRetu *) slave->opaque;
 437
 438     if ((s->cc[0] & 0x500) == 0x500) {  /* TODO: Which bits? */
 439         /* TODO: reissue the interrupt every 100ms or so.  */
 440         s->irqst |= 1 << retu_int_head;
 441         retu_interrupt_update(s);
 442     }
 443
 444     if (state)
 445         s->result[retu_adc_head_det] = 50;
 446     else
 447         s->result[retu_adc_head_det] = 123;
 448 }
 449
 450 static void retu_hook_event(void *retu, int state)
 451 {
 452     CBusSlave *slave = (CBusSlave *) retu;
 453     CBusRetu *s = (CBusRetu *) slave->opaque;
 454
 455     if ((s->cc[0] & 0x500) == 0x500) {
 456         /* TODO: reissue the interrupt every 100ms or so.  */
 457         s->irqst |= 1 << retu_int_hook;
 458         retu_interrupt_update(s);
 459     }
 460
 461     if (state)
 462         s->result[retu_adc_hook_det] = 50;
 463     else
 464         s->result[retu_adc_hook_det] = 123;
 465 }
 466 #endif
 467
 468 /* Tahvo/Betty */
 469 typedef struct {
 470     uint16_t irqst;
 471     uint16_t irqen;
 472     uint8_t charger;
 473     uint8_t backlight;
 474     uint16_t usbr;
 475     uint16_t power;
 476
 477     int is_betty;
 478     qemu_irq irq;
 479     CBusSlave cbus;
 480 } CBusTahvo;
 481
 482 static void tahvo_interrupt_update(CBusTahvo *s)
 483 {
 484     qemu_set_irq(s->irq, s->irqst & ~s->irqen);
 485 }
 486
 487 #define TAHVO_REG_ASICR         0x00    /* (RO) ASIC ID & revision */
 488 #define TAHVO_REG_IDR           0x01    /* (T)  Interrupt ID */
 489 #define TAHVO_REG_IDSR          0x02    /* (RO) Interrupt status */
 490 #define TAHVO_REG_IMR           0x03    /* (RW) Interrupt mask */
 491 #define TAHVO_REG_CHAPWMR       0x04    /* (RW) Charger PWM */
 492 #define TAHVO_REG_LEDPWMR       0x05    /* (RW) LED PWM */
 493 #define TAHVO_REG_USBR          0x06    /* (RW) USB control */
 494 #define TAHVO_REG_RCR           0x07    /* (RW) Some kind of power management */
 495 #define TAHVO_REG_CCR1          0x08    /* (RW) Common control register 1 */
 496 #define TAHVO_REG_CCR2          0x09    /* (RW) Common control register 2 */
 497 #define TAHVO_REG_TESTR1        0x0a    /* (RW) Test register 1 */
 498 #define TAHVO_REG_TESTR2        0x0b    /* (RW) Test register 2 */
 499 #define TAHVO_REG_NOPR          0x0c    /* (RW) Number of periods */
 500 #define TAHVO_REG_FRR           0x0d    /* (RO) FR */
 501
 502 static inline uint16_t tahvo_read(CBusTahvo *s, int reg)
 503 {
 504 #ifdef DEBUG
 505     printf("TAHVO read at %02x\n", reg);
 506 #endif
 507
 508     switch (reg) {
 509     case TAHVO_REG_ASICR:
 510         return 0x0021 | (s->is_betty ? 0x0b00 : 0x0300);        /* 22 in N810 */
 511
 512     case TAHVO_REG_IDR:
 513     case TAHVO_REG_IDSR:        /* XXX: what does this do?  */
 514         return s->irqst;
 515
 516     case TAHVO_REG_IMR:
 517         return s->irqen;
 518
 519     case TAHVO_REG_CHAPWMR:
 520         return s->charger;
 521
 522     case TAHVO_REG_LEDPWMR:
 523         return s->backlight;
 524
 525     case TAHVO_REG_USBR:
 526         return s->usbr;
 527
 528     case TAHVO_REG_RCR:
 529         return s->power;
 530
 531     case TAHVO_REG_CCR1:
 532     case TAHVO_REG_CCR2:
 533     case TAHVO_REG_TESTR1:
 534     case TAHVO_REG_TESTR2:
 535     case TAHVO_REG_NOPR:
 536     case TAHVO_REG_FRR:
 537         return 0x0000;
 538
 539     default:
 540         hw_error("%s: bad register %02x\n", __FUNCTION__, reg);
 541     }
 542 }
 543
 544 static inline void tahvo_write(CBusTahvo *s, int reg, uint16_t val)
 545 {
 546 #ifdef DEBUG
 547     printf("TAHVO write of %04x at %02x\n", val, reg);
 548 #endif
 549
 550     switch (reg) {
 551     case TAHVO_REG_IDR:
 552         s->irqst ^= val;
 553         tahvo_interrupt_update(s);
 554         break;
 555
 556     case TAHVO_REG_IMR:
 557         s->irqen = val;
 558         tahvo_interrupt_update(s);
 559         break;
 560
 561     case TAHVO_REG_CHAPWMR:
 562         s->charger = val;
 563         break;
 564
 565     case TAHVO_REG_LEDPWMR:
 566         if (s->backlight != (val & 0x7f)) {
 567             s->backlight = val & 0x7f;
 568             printf("%s: LCD backlight now at %i / 127\n",
 569                             __FUNCTION__, s->backlight);
 570         }
 571         break;
 572
 573     case TAHVO_REG_USBR:
 574         s->usbr = val;
 575         break;
 576
 577     case TAHVO_REG_RCR:
 578         s->power = val;
 579         break;
 580
 581     case TAHVO_REG_CCR1:
 582     case TAHVO_REG_CCR2:
 583     case TAHVO_REG_TESTR1:
 584     case TAHVO_REG_TESTR2:
 585     case TAHVO_REG_NOPR:
 586     case TAHVO_REG_FRR:
 587         break;
 588
 589     default:
 590         hw_error("%s: bad register %02x\n", __FUNCTION__, reg);
 591     }
 592 }
 593
 594 static void tahvo_io(void *opaque, int rw, int reg, uint16_t *val)
 595 {
 596     CBusTahvo *s = (CBusTahvo *) opaque;
 597
 598     if (rw)
 599         *val = tahvo_read(s, reg);
 600     else
 601         tahvo_write(s, reg, *val);
 602 }
 603
 604 void *tahvo_init(qemu_irq irq, int betty)
 605 {
 606     CBusTahvo *s = (CBusTahvo *) g_malloc0(sizeof(*s));
 607
 608     s->irq = irq;
 609     s->irqen = 0xffff;
 610     s->irqst = 0x0000;
 611     s->is_betty = !!betty;
 612
 613     s->cbus.opaque = s;
 614     s->cbus.io = tahvo_io;
 615     s->cbus.addr = 2;
 616
 617     return &s->cbus;
 618 }