hw/virtio-blk.h

   1 /*
   2  * Virtio Block Device
   3  *
   4  * Copyright IBM, Corp. 2007
   5  *
   6  * Authors:
   7  *  Anthony Liguori   <aliguori@us.ibm.com>
   8  *
   9  * This work is licensed under the terms of the GNU GPL, version 2.  See
  10  * the COPYING file in the top-level directory.
  11  *
  12  */
  13
  14 #ifndef _QEMU_VIRTIO_BLK_H
  15 #define _QEMU_VIRTIO_BLK_H
  16
  17 #include "virtio.h"
  18 #include "hw/block-common.h"
  19
  20 /* from Linux's linux/virtio_blk.h */
  21
  22 /* The ID for virtio_block */
  23 #define VIRTIO_ID_BLOCK 2
  24
  25 /* Feature bits */
  26 #define VIRTIO_BLK_F_BARRIER    0       /* Does host support barriers? */
  27 #define VIRTIO_BLK_F_SIZE_MAX   1       /* Indicates maximum segment size */
  28 #define VIRTIO_BLK_F_SEG_MAX    2       /* Indicates maximum # of segments */
  29 #define VIRTIO_BLK_F_GEOMETRY   4       /* Indicates support of legacy geometry */
  30 #define VIRTIO_BLK_F_RO         5       /* Disk is read-only */
  31 #define VIRTIO_BLK_F_BLK_SIZE   6       /* Block size of disk is available*/
  32 #define VIRTIO_BLK_F_SCSI       7       /* Supports scsi command passthru */
  33 /* #define VIRTIO_BLK_F_IDENTIFY   8       ATA IDENTIFY supported, DEPRECATED */
  34 #define VIRTIO_BLK_F_WCE        9       /* write cache enabled */
  35 #define VIRTIO_BLK_F_TOPOLOGY   10      /* Topology information is available */
  36 #define VIRTIO_BLK_F_CONFIG_WCE 11      /* write cache configurable */
  37
  38 #define VIRTIO_BLK_ID_BYTES     20      /* ID string length */
  39
  40 struct virtio_blk_config
  41 {
  42     uint64_t capacity;
  43     uint32_t size_max;
  44     uint32_t seg_max;
  45     uint16_t cylinders;
  46     uint8_t heads;
  47     uint8_t sectors;
  48     uint32_t blk_size;
  49     uint8_t physical_block_exp;
  50     uint8_t alignment_offset;
  51     uint16_t min_io_size;
  52     uint32_t opt_io_size;
  53     uint8_t wce;
  54 } QEMU_PACKED;
  55
  56 /* These two define direction. */
  57 #define VIRTIO_BLK_T_IN         0
  58 #define VIRTIO_BLK_T_OUT        1
  59
  60 /* This bit says it's a scsi command, not an actual read or write. */
  61 #define VIRTIO_BLK_T_SCSI_CMD   2
  62
  63 /* Flush the volatile write cache */
  64 #define VIRTIO_BLK_T_FLUSH      4
  65
  66 /* return the device ID string */
  67 #define VIRTIO_BLK_T_GET_ID     8
  68
  69 /* Barrier before this op. */
  70 #define VIRTIO_BLK_T_BARRIER    0x80000000
  71
  72 /* This is the first element of the read scatter-gather list. */
  73 struct virtio_blk_outhdr
  74 {
  75     /* VIRTIO_BLK_T* */
  76     uint32_t type;
  77     /* io priority. */
  78     uint32_t ioprio;
  79     /* Sector (ie. 512 byte offset) */
  80     uint64_t sector;
  81 };
  82
  83 #define VIRTIO_BLK_S_OK         0
  84 #define VIRTIO_BLK_S_IOERR      1
  85 #define VIRTIO_BLK_S_UNSUPP     2
  86
  87 /* This is the last element of the write scatter-gather list */
  88 struct virtio_blk_inhdr
  89 {
  90     unsigned char status;
  91 };
  92
  93 /* SCSI pass-through header */
  94 struct virtio_scsi_inhdr
  95 {
  96     uint32_t errors;
  97     uint32_t data_len;
  98     uint32_t sense_len;
  99     uint32_t residual;
 100 };
 101
 102 struct VirtIOBlkConf
 103 {
 104     BlockConf conf;
 105     char *serial;
 106     uint32_t scsi;
 107     uint32_t config_wce;
 108 };
 109
 110 #define DEFINE_VIRTIO_BLK_FEATURES(_state, _field) \
 111         DEFINE_VIRTIO_COMMON_FEATURES(_state, _field), \
 112         DEFINE_PROP_BIT("config-wce", _state, _field, VIRTIO_BLK_F_CONFIG_WCE, true)
 113
 114 #endif