QMP/qmp-events.txt

   1                    QEMU Monitor Protocol Events
   2                    ============================
   3
   4 BALLOON_CHANGE
   5 --------------
   6
   7 Emitted when the guest changes the actual BALLOON level. This
   8 value is equivalent to the 'actual' field return by the
   9 'query-balloon' command
  10
  11 Data:
  12
  13 - "actual": actual level of the guest memory balloon in bytes (json-number)
  14
  15 Example:
  16
  17 { "event": "BALLOON_CHANGE",
  18     "data": { "actual": 944766976 },
  19     "timestamp": { "seconds": 1267020223, "microseconds": 435656 } }
  20
  21 BLOCK_IO_ERROR
  22 --------------
  23
  24 Emitted when a disk I/O error occurs.
  25
  26 Data:
  27
  28 - "device": device name (json-string)
  29 - "operation": I/O operation (json-string, "read" or "write")
  30 - "action": action that has been taken, it's one of the following (json-string):
  31     "ignore": error has been ignored
  32     "report": error has been reported to the device
  33     "stop": error caused VM to be stopped
  34
  35 Example:
  36
  37 { "event": "BLOCK_IO_ERROR",
  38     "data": { "device": "ide0-hd1",
  39               "operation": "write",
  40               "action": "stop" },
  41     "timestamp": { "seconds": 1265044230, "microseconds": 450486 } }
  42
  43 Note: If action is "stop", a STOP event will eventually follow the
  44 BLOCK_IO_ERROR event.
  45
  46 BLOCK_JOB_CANCELLED
  47 -------------------
  48
  49 Emitted when a block job has been cancelled.
  50
  51 Data:
  52
  53 - "type":     Job type (json-string; "stream" for image streaming
  54                                      "commit" for block commit)
  55 - "device":   Device name (json-string)
  56 - "len":      Maximum progress value (json-int)
  57 - "offset":   Current progress value (json-int)
  58               On success this is equal to len.
  59               On failure this is less than len.
  60 - "speed":    Rate limit, bytes per second (json-int)
  61
  62 Example:
  63
  64 { "event": "BLOCK_JOB_CANCELLED",
  65      "data": { "type": "stream", "device": "virtio-disk0",
  66                "len": 10737418240, "offset": 134217728,
  67                "speed": 0 },
  68      "timestamp": { "seconds": 1267061043, "microseconds": 959568 } }
  69
  70 BLOCK_JOB_COMPLETED
  71 -------------------
  72
  73 Emitted when a block job has completed.
  74
  75 Data:
  76
  77 - "type":     Job type (json-string; "stream" for image streaming
  78                                      "commit" for block commit)
  79 - "device":   Device name (json-string)
  80 - "len":      Maximum progress value (json-int)
  81 - "offset":   Current progress value (json-int)
  82               On success this is equal to len.
  83               On failure this is less than len.
  84 - "speed":    Rate limit, bytes per second (json-int)
  85 - "error":    Error message (json-string, optional)
  86               Only present on failure.  This field contains a human-readable
  87               error message.  There are no semantics other than that streaming
  88               has failed and clients should not try to interpret the error
  89               string.
  90
  91 Example:
  92
  93 { "event": "BLOCK_JOB_COMPLETED",
  94      "data": { "type": "stream", "device": "virtio-disk0",
  95                "len": 10737418240, "offset": 10737418240,
  96                "speed": 0 },
  97      "timestamp": { "seconds": 1267061043, "microseconds": 959568 } }
  98
  99 BLOCK_JOB_ERROR
 100 ---------------
 101
 102 Emitted when a block job encounters an error.
 103
 104 Data:
 105
 106 - "device": device name (json-string)
 107 - "operation": I/O operation (json-string, "read" or "write")
 108 - "action": action that has been taken, it's one of the following (json-string):
 109     "ignore": error has been ignored, the job may fail later
 110     "report": error will be reported and the job canceled
 111     "stop": error caused job to be paused
 112
 113 Example:
 114
 115 { "event": "BLOCK_JOB_ERROR",
 116     "data": { "device": "ide0-hd1",
 117               "operation": "write",
 118               "action": "stop" },
 119     "timestamp": { "seconds": 1265044230, "microseconds": 450486 } }
 120
 121 BLOCK_JOB_READY
 122 ---------------
 123
 124 Emitted when a block job is ready to complete.
 125
 126 Data:
 127
 128 - "device": device name (json-string)
 129
 130 Example:
 131
 132 { "event": "BLOCK_JOB_READY",
 133     "data": { "device": "ide0-hd1" },
 134     "timestamp": { "seconds": 1265044230, "microseconds": 450486 } }
 135
 136 Note: The "ready to complete" status is always reset by a BLOCK_JOB_ERROR
 137 event.
 138
 139 DEVICE_TRAY_MOVED
 140 -----------------
 141
 142 It's emitted whenever the tray of a removable device is moved by the guest
 143 or by HMP/QMP commands.
 144
 145 Data:
 146
 147 - "device": device name (json-string)
 148 - "tray-open": true if the tray has been opened or false if it has been closed
 149                (json-bool)
 150
 151 { "event": "DEVICE_TRAY_MOVED",
 152   "data": { "device": "ide1-cd0",
 153             "tray-open": true
 154   },
 155   "timestamp": { "seconds": 1265044230, "microseconds": 450486 } }
 156
 157 RESET
 158 -----
 159
 160 Emitted when the Virtual Machine is reseted.
 161
 162 Data: None.
 163
 164 Example:
 165
 166 { "event": "RESET",
 167     "timestamp": { "seconds": 1267041653, "microseconds": 9518 } }
 168
 169 RESUME
 170 ------
 171
 172 Emitted when the Virtual Machine resumes execution.
 173
 174 Data: None.
 175
 176 Example:
 177
 178 { "event": "RESUME",
 179     "timestamp": { "seconds": 1271770767, "microseconds": 582542 } }
 180
 181 RTC_CHANGE
 182 ----------
 183
 184 Emitted when the guest changes the RTC time.
 185
 186 Data:
 187
 188 - "offset": delta against the host UTC in seconds (json-number)
 189
 190 Example:
 191
 192 { "event": "RTC_CHANGE",
 193     "data": { "offset": 78 },
 194     "timestamp": { "seconds": 1267020223, "microseconds": 435656 } }
 195
 196 SHUTDOWN
 197 --------
 198
 199 Emitted when the Virtual Machine is powered down.
 200
 201 Data: None.
 202
 203 Example:
 204
 205 { "event": "SHUTDOWN",
 206     "timestamp": { "seconds": 1267040730, "microseconds": 682951 } }
 207
 208 Note: If the command-line option "-no-shutdown" has been specified, a STOP
 209 event will eventually follow the SHUTDOWN event.
 210
 211 SPICE_CONNECTED, SPICE_DISCONNECTED
 212 -----------------------------------
 213
 214 Emitted when a SPICE client connects or disconnects.
 215
 216 Data:
 217
 218 - "server": Server information (json-object)
 219   - "host": IP address (json-string)
 220   - "port": port number (json-string)
 221   - "family": address family (json-string, "ipv4" or "ipv6")
 222 - "client": Client information (json-object)
 223   - "host": IP address (json-string)
 224   - "port": port number (json-string)
 225   - "family": address family (json-string, "ipv4" or "ipv6")
 226
 227 Example:
 228
 229 { "timestamp": {"seconds": 1290688046, "microseconds": 388707},
 230   "event": "SPICE_CONNECTED",
 231   "data": {
 232     "server": { "port": "5920", "family": "ipv4", "host": "127.0.0.1"},
 233     "client": {"port": "52873", "family": "ipv4", "host": "127.0.0.1"}
 234 }}
 235
 236 SPICE_INITIALIZED
 237 -----------------
 238
 239 Emitted after initial handshake and authentication takes place (if any)
 240 and the SPICE channel is up'n'running
 241
 242 Data:
 243
 244 - "server": Server information (json-object)
 245   - "host": IP address (json-string)
 246   - "port": port number (json-string)
 247   - "family": address family (json-string, "ipv4" or "ipv6")
 248   - "auth": authentication method (json-string, optional)
 249 - "client": Client information (json-object)
 250   - "host": IP address (json-string)
 251   - "port": port number (json-string)
 252   - "family": address family (json-string, "ipv4" or "ipv6")
 253   - "connection-id": spice connection id.  All channels with the same id
 254                      belong to the same spice session (json-int)
 255   - "channel-type": channel type.  "1" is the main control channel, filter for
 256                     this one if you want track spice sessions only (json-int)
 257   - "channel-id": channel id.  Usually "0", might be different needed when
 258                   multiple channels of the same type exist, such as multiple
 259                   display channels in a multihead setup (json-int)
 260   - "tls": whevener the channel is encrypted (json-bool)
 261
 262 Example:
 263
 264 { "timestamp": {"seconds": 1290688046, "microseconds": 417172},
 265   "event": "SPICE_INITIALIZED",
 266   "data": {"server": {"auth": "spice", "port": "5921",
 267                       "family": "ipv4", "host": "127.0.0.1"},
 268            "client": {"port": "49004", "family": "ipv4", "channel-type": 3,
 269                       "connection-id": 1804289383, "host": "127.0.0.1",
 270                       "channel-id": 0, "tls": true}
 271 }}
 272
 273 STOP
 274 ----
 275
 276 Emitted when the Virtual Machine is stopped.
 277
 278 Data: None.
 279
 280 Example:
 281
 282 { "event": "STOP",
 283     "timestamp": { "seconds": 1267041730, "microseconds": 281295 } }
 284
 285 SUSPEND
 286 -------
 287
 288 Emitted when guest enters S3 state.
 289
 290 Data: None.
 291
 292 Example:
 293
 294 { "event": "SUSPEND",
 295      "timestamp": { "seconds": 1344456160, "microseconds": 309119 } }
 296
 297 SUSPEND_DISK
 298 ------------
 299
 300 Emitted when the guest makes a request to enter S4 state.
 301
 302 Data: None.
 303
 304 Example:
 305
 306 { "event": "SUSPEND_DISK",
 307      "timestamp": { "seconds": 1344456160, "microseconds": 309119 } }
 308
 309 Note: QEMU shuts down when entering S4 state.
 310
 311 VNC_CONNECTED
 312 -------------
 313
 314 Emitted when a VNC client establishes a connection.
 315
 316 Data:
 317
 318 - "server": Server information (json-object)
 319   - "host": IP address (json-string)
 320   - "service": port number (json-string)
 321   - "family": address family (json-string, "ipv4" or "ipv6")
 322   - "auth": authentication method (json-string, optional)
 323 - "client": Client information (json-object)
 324   - "host": IP address (json-string)
 325   - "service": port number (json-string)
 326   - "family": address family (json-string, "ipv4" or "ipv6")
 327
 328 Example:
 329
 330 { "event": "VNC_CONNECTED",
 331     "data": {
 332         "server": { "auth": "sasl", "family": "ipv4",
 333                     "service": "5901", "host": "0.0.0.0" },
 334         "client": { "family": "ipv4", "service": "58425",
 335                     "host": "127.0.0.1" } },
 336     "timestamp": { "seconds": 1262976601, "microseconds": 975795 } }
 337
 338
 339 Note: This event is emitted before any authentication takes place, thus
 340 the authentication ID is not provided.
 341
 342 VNC_DISCONNECTED
 343 ----------------
 344
 345 Emitted when the connection is closed.
 346
 347 Data:
 348
 349 - "server": Server information (json-object)
 350   - "host": IP address (json-string)
 351   - "service": port number (json-string)
 352   - "family": address family (json-string, "ipv4" or "ipv6")
 353   - "auth": authentication method (json-string, optional)
 354 - "client": Client information (json-object)
 355   - "host": IP address (json-string)
 356   - "service": port number (json-string)
 357   - "family": address family (json-string, "ipv4" or "ipv6")
 358   - "x509_dname": TLS dname (json-string, optional)
 359   - "sasl_username": SASL username (json-string, optional)
 360
 361 Example:
 362
 363 { "event": "VNC_DISCONNECTED",
 364     "data": {
 365         "server": { "auth": "sasl", "family": "ipv4",
 366                     "service": "5901", "host": "0.0.0.0" },
 367         "client": { "family": "ipv4", "service": "58425",
 368                     "host": "127.0.0.1", "sasl_username": "luiz" } },
 369     "timestamp": { "seconds": 1262976601, "microseconds": 975795 } }
 370
 371 VNC_INITIALIZED
 372 ---------------
 373
 374 Emitted after authentication takes place (if any) and the VNC session is
 375 made active.
 376
 377 Data:
 378
 379 - "server": Server information (json-object)
 380   - "host": IP address (json-string)
 381   - "service": port number (json-string)
 382   - "family": address family (json-string, "ipv4" or "ipv6")
 383   - "auth": authentication method (json-string, optional)
 384 - "client": Client information (json-object)
 385   - "host": IP address (json-string)
 386   - "service": port number (json-string)
 387   - "family": address family (json-string, "ipv4" or "ipv6")
 388   - "x509_dname": TLS dname (json-string, optional)
 389   - "sasl_username": SASL username (json-string, optional)
 390
 391 Example:
 392
 393 { "event": "VNC_INITIALIZED",
 394     "data": {
 395         "server": { "auth": "sasl", "family": "ipv4",
 396                     "service": "5901", "host": "0.0.0.0"},
 397         "client": { "family": "ipv4", "service": "46089",
 398                     "host": "127.0.0.1", "sasl_username": "luiz" } },
 399         "timestamp": { "seconds": 1263475302, "microseconds": 150772 } }
 400
 401 WAKEUP
 402 ------
 403
 404 Emitted when the guest has woken up from S3 and is running.
 405
 406 Data: None.
 407
 408 Example:
 409
 410 { "event": "WATCHDOG",
 411      "timestamp": { "seconds": 1344522075, "microseconds": 745528 } }
 412
 413 WATCHDOG
 414 --------
 415
 416 Emitted when the watchdog device's timer is expired.
 417
 418 Data:
 419
 420 - "action": Action that has been taken, it's one of the following (json-string):
 421             "reset", "shutdown", "poweroff", "pause", "debug", or "none"
 422
 423 Example:
 424
 425 { "event": "WATCHDOG",
 426      "data": { "action": "reset" },
 427      "timestamp": { "seconds": 1267061043, "microseconds": 959568 } }
 428
 429 Note: If action is "reset", "shutdown", or "pause" the WATCHDOG event is
 430 followed respectively by the RESET, SHUTDOWN, or STOP events.