hw/pckbd.c

   1 /*
   2  * QEMU PC keyboard emulation
   3  *
   4  * Copyright (c) 2003 Fabrice Bellard
   5  *
   6  * Permission is hereby granted, free of charge, to any person obtaining a copy
   7  * of this software and associated documentation files (the "Software"), to deal
   8  * in the Software without restriction, including without limitation the rights
   9  * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
  10  * copies of the Software, and to permit persons to whom the Software is
  11  * furnished to do so, subject to the following conditions:
  12  *
  13  * The above copyright notice and this permission notice shall be included in
  14  * all copies or substantial portions of the Software.
  15  *
  16  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  17  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  18  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
  19  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  20  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
  21  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
  22  * THE SOFTWARE.
  23  */
  24 #include "hw.h"
  25 #include "isa.h"
  26 #include "pc.h"
  27 #include "ps2.h"
  28 #include "sysemu/sysemu.h"
  29
  30 /* debug PC keyboard */
  31 //#define DEBUG_KBD
  32 #ifdef DEBUG_KBD
  33 #define DPRINTF(fmt, ...)                                       \
  34     do { printf("KBD: " fmt , ## __VA_ARGS__); } while (0)
  35 #else
  36 #define DPRINTF(fmt, ...)
  37 #endif
  38
  39 /*      Keyboard Controller Commands */
  40 #define KBD_CCMD_READ_MODE      0x20    /* Read mode bits */
  41 #define KBD_CCMD_WRITE_MODE     0x60    /* Write mode bits */
  42 #define KBD_CCMD_GET_VERSION    0xA1    /* Get controller version */
  43 #define KBD_CCMD_MOUSE_DISABLE  0xA7    /* Disable mouse interface */
  44 #define KBD_CCMD_MOUSE_ENABLE   0xA8    /* Enable mouse interface */
  45 #define KBD_CCMD_TEST_MOUSE     0xA9    /* Mouse interface test */
  46 #define KBD_CCMD_SELF_TEST      0xAA    /* Controller self test */
  47 #define KBD_CCMD_KBD_TEST       0xAB    /* Keyboard interface test */
  48 #define KBD_CCMD_KBD_DISABLE    0xAD    /* Keyboard interface disable */
  49 #define KBD_CCMD_KBD_ENABLE     0xAE    /* Keyboard interface enable */
  50 #define KBD_CCMD_READ_INPORT    0xC0    /* read input port */
  51 #define KBD_CCMD_READ_OUTPORT   0xD0    /* read output port */
  52 #define KBD_CCMD_WRITE_OUTPORT  0xD1    /* write output port */
  53 #define KBD_CCMD_WRITE_OBUF     0xD2
  54 #define KBD_CCMD_WRITE_AUX_OBUF 0xD3    /* Write to output buffer as if
  55                                            initiated by the auxiliary device */
  56 #define KBD_CCMD_WRITE_MOUSE    0xD4    /* Write the following byte to the mouse */
  57 #define KBD_CCMD_DISABLE_A20    0xDD    /* HP vectra only ? */
  58 #define KBD_CCMD_ENABLE_A20     0xDF    /* HP vectra only ? */
  59 #define KBD_CCMD_PULSE_BITS_3_0 0xF0    /* Pulse bits 3-0 of the output port P2. */
  60 #define KBD_CCMD_RESET          0xFE    /* Pulse bit 0 of the output port P2 = CPU reset. */
  61 #define KBD_CCMD_NO_OP          0xFF    /* Pulse no bits of the output port P2. */
  62
  63 /* Keyboard Commands */
  64 #define KBD_CMD_SET_LEDS        0xED    /* Set keyboard leds */
  65 #define KBD_CMD_ECHO            0xEE
  66 #define KBD_CMD_GET_ID          0xF2    /* get keyboard ID */
  67 #define KBD_CMD_SET_RATE        0xF3    /* Set typematic rate */
  68 #define KBD_CMD_ENABLE          0xF4    /* Enable scanning */
  69 #define KBD_CMD_RESET_DISABLE   0xF5    /* reset and disable scanning */
  70 #define KBD_CMD_RESET_ENABLE    0xF6    /* reset and enable scanning */
  71 #define KBD_CMD_RESET           0xFF    /* Reset */
  72
  73 /* Keyboard Replies */
  74 #define KBD_REPLY_POR           0xAA    /* Power on reset */
  75 #define KBD_REPLY_ACK           0xFA    /* Command ACK */
  76 #define KBD_REPLY_RESEND        0xFE    /* Command NACK, send the cmd again */
  77
  78 /* Status Register Bits */
  79 #define KBD_STAT_OBF            0x01    /* Keyboard output buffer full */
  80 #define KBD_STAT_IBF            0x02    /* Keyboard input buffer full */
  81 #define KBD_STAT_SELFTEST       0x04    /* Self test successful */
  82 #define KBD_STAT_CMD            0x08    /* Last write was a command write (0=data) */
  83 #define KBD_STAT_UNLOCKED       0x10    /* Zero if keyboard locked */
  84 #define KBD_STAT_MOUSE_OBF      0x20    /* Mouse output buffer full */
  85 #define KBD_STAT_GTO            0x40    /* General receive/xmit timeout */
  86 #define KBD_STAT_PERR           0x80    /* Parity error */
  87
  88 /* Controller Mode Register Bits */
  89 #define KBD_MODE_KBD_INT        0x01    /* Keyboard data generate IRQ1 */
  90 #define KBD_MODE_MOUSE_INT      0x02    /* Mouse data generate IRQ12 */
  91 #define KBD_MODE_SYS            0x04    /* The system flag (?) */
  92 #define KBD_MODE_NO_KEYLOCK     0x08    /* The keylock doesn't affect the keyboard if set */
  93 #define KBD_MODE_DISABLE_KBD    0x10    /* Disable keyboard interface */
  94 #define KBD_MODE_DISABLE_MOUSE  0x20    /* Disable mouse interface */
  95 #define KBD_MODE_KCC            0x40    /* Scan code conversion to PC format */
  96 #define KBD_MODE_RFU            0x80
  97
  98 /* Output Port Bits */
  99 #define KBD_OUT_RESET           0x01    /* 1=normal mode, 0=reset */
 100 #define KBD_OUT_A20             0x02    /* x86 only */
 101 #define KBD_OUT_OBF             0x10    /* Keyboard output buffer full */
 102 #define KBD_OUT_MOUSE_OBF       0x20    /* Mouse output buffer full */
 103
 104 /* Mouse Commands */
 105 #define AUX_SET_SCALE11         0xE6    /* Set 1:1 scaling */
 106 #define AUX_SET_SCALE21         0xE7    /* Set 2:1 scaling */
 107 #define AUX_SET_RES             0xE8    /* Set resolution */
 108 #define AUX_GET_SCALE           0xE9    /* Get scaling factor */
 109 #define AUX_SET_STREAM          0xEA    /* Set stream mode */
 110 #define AUX_POLL                0xEB    /* Poll */
 111 #define AUX_RESET_WRAP          0xEC    /* Reset wrap mode */
 112 #define AUX_SET_WRAP            0xEE    /* Set wrap mode */
 113 #define AUX_SET_REMOTE          0xF0    /* Set remote mode */
 114 #define AUX_GET_TYPE            0xF2    /* Get type */
 115 #define AUX_SET_SAMPLE          0xF3    /* Set sample rate */
 116 #define AUX_ENABLE_DEV          0xF4    /* Enable aux device */
 117 #define AUX_DISABLE_DEV         0xF5    /* Disable aux device */
 118 #define AUX_SET_DEFAULT         0xF6
 119 #define AUX_RESET               0xFF    /* Reset aux device */
 120 #define AUX_ACK                 0xFA    /* Command byte ACK. */
 121
 122 #define MOUSE_STATUS_REMOTE     0x40
 123 #define MOUSE_STATUS_ENABLED    0x20
 124 #define MOUSE_STATUS_SCALE21    0x10
 125
 126 #define KBD_PENDING_KBD         1
 127 #define KBD_PENDING_AUX         2
 128
 129 typedef struct KBDState {
 130     uint8_t write_cmd; /* if non zero, write data to port 60 is expected */
 131     uint8_t status;
 132     uint8_t mode;
 133     uint8_t outport;
 134     /* Bitmask of devices with data available.  */
 135     uint8_t pending;
 136     void *kbd;
 137     void *mouse;
 138
 139     qemu_irq irq_kbd;
 140     qemu_irq irq_mouse;
 141     qemu_irq *a20_out;
 142     hwaddr mask;
 143 } KBDState;
 144
 145 /* update irq and KBD_STAT_[MOUSE_]OBF */
 146 /* XXX: not generating the irqs if KBD_MODE_DISABLE_KBD is set may be
 147    incorrect, but it avoids having to simulate exact delays */
 148 static void kbd_update_irq(KBDState *s)
 149 {
 150     int irq_kbd_level, irq_mouse_level;
 151
 152     irq_kbd_level = 0;
 153     irq_mouse_level = 0;
 154     s->status &= ~(KBD_STAT_OBF | KBD_STAT_MOUSE_OBF);
 155     s->outport &= ~(KBD_OUT_OBF | KBD_OUT_MOUSE_OBF);
 156     if (s->pending) {
 157         s->status |= KBD_STAT_OBF;
 158         s->outport |= KBD_OUT_OBF;
 159         /* kbd data takes priority over aux data.  */
 160         if (s->pending == KBD_PENDING_AUX) {
 161             s->status |= KBD_STAT_MOUSE_OBF;
 162             s->outport |= KBD_OUT_MOUSE_OBF;
 163             if (s->mode & KBD_MODE_MOUSE_INT)
 164                 irq_mouse_level = 1;
 165         } else {
 166             if ((s->mode & KBD_MODE_KBD_INT) &&
 167                 !(s->mode & KBD_MODE_DISABLE_KBD))
 168                 irq_kbd_level = 1;
 169         }
 170     }
 171     qemu_set_irq(s->irq_kbd, irq_kbd_level);
 172     qemu_set_irq(s->irq_mouse, irq_mouse_level);
 173 }
 174
 175 static void kbd_update_kbd_irq(void *opaque, int level)
 176 {
 177     KBDState *s = (KBDState *)opaque;
 178
 179     if (level)
 180         s->pending |= KBD_PENDING_KBD;
 181     else
 182         s->pending &= ~KBD_PENDING_KBD;
 183     kbd_update_irq(s);
 184 }
 185
 186 static void kbd_update_aux_irq(void *opaque, int level)
 187 {
 188     KBDState *s = (KBDState *)opaque;
 189
 190     if (level)
 191         s->pending |= KBD_PENDING_AUX;
 192     else
 193         s->pending &= ~KBD_PENDING_AUX;
 194     kbd_update_irq(s);
 195 }
 196
 197 static uint64_t kbd_read_status(void *opaque, hwaddr addr,
 198                                 unsigned size)
 199 {
 200     KBDState *s = opaque;
 201     int val;
 202     val = s->status;
 203     DPRINTF("kbd: read status=0x%02x\n", val);
 204     return val;
 205 }
 206
 207 static void kbd_queue(KBDState *s, int b, int aux)
 208 {
 209     if (aux)
 210         ps2_queue(s->mouse, b);
 211     else
 212         ps2_queue(s->kbd, b);
 213 }
 214
 215 static void outport_write(KBDState *s, uint32_t val)
 216 {
 217     DPRINTF("kbd: write outport=0x%02x\n", val);
 218     s->outport = val;
 219     if (s->a20_out) {
 220         qemu_set_irq(*s->a20_out, (val >> 1) & 1);
 221     }
 222     if (!(val & 1)) {
 223         qemu_system_reset_request();
 224     }
 225 }
 226
 227 static void kbd_write_command(void *opaque, hwaddr addr,
 228                               uint64_t val, unsigned size)
 229 {
 230     KBDState *s = opaque;
 231
 232     DPRINTF("kbd: write cmd=0x%02x\n", val);
 233
 234     /* Bits 3-0 of the output port P2 of the keyboard controller may be pulsed
 235      * low for approximately 6 micro seconds. Bits 3-0 of the KBD_CCMD_PULSE
 236      * command specify the output port bits to be pulsed.
 237      * 0: Bit should be pulsed. 1: Bit should not be modified.
 238      * The only useful version of this command is pulsing bit 0,
 239      * which does a CPU reset.
 240      */
 241     if((val & KBD_CCMD_PULSE_BITS_3_0) == KBD_CCMD_PULSE_BITS_3_0) {
 242         if(!(val & 1))
 243             val = KBD_CCMD_RESET;
 244         else
 245             val = KBD_CCMD_NO_OP;
 246     }
 247
 248     switch(val) {
 249     case KBD_CCMD_READ_MODE:
 250         kbd_queue(s, s->mode, 0);
 251         break;
 252     case KBD_CCMD_WRITE_MODE:
 253     case KBD_CCMD_WRITE_OBUF:
 254     case KBD_CCMD_WRITE_AUX_OBUF:
 255     case KBD_CCMD_WRITE_MOUSE:
 256     case KBD_CCMD_WRITE_OUTPORT:
 257         s->write_cmd = val;
 258         break;
 259     case KBD_CCMD_MOUSE_DISABLE:
 260         s->mode |= KBD_MODE_DISABLE_MOUSE;
 261         break;
 262     case KBD_CCMD_MOUSE_ENABLE:
 263         s->mode &= ~KBD_MODE_DISABLE_MOUSE;
 264         break;
 265     case KBD_CCMD_TEST_MOUSE:
 266         kbd_queue(s, 0x00, 0);
 267         break;
 268     case KBD_CCMD_SELF_TEST:
 269         s->status |= KBD_STAT_SELFTEST;
 270         kbd_queue(s, 0x55, 0);
 271         break;
 272     case KBD_CCMD_KBD_TEST:
 273         kbd_queue(s, 0x00, 0);
 274         break;
 275     case KBD_CCMD_KBD_DISABLE:
 276         s->mode |= KBD_MODE_DISABLE_KBD;
 277         kbd_update_irq(s);
 278         break;
 279     case KBD_CCMD_KBD_ENABLE:
 280         s->mode &= ~KBD_MODE_DISABLE_KBD;
 281         kbd_update_irq(s);
 282         break;
 283     case KBD_CCMD_READ_INPORT:
 284         kbd_queue(s, 0x00, 0);
 285         break;
 286     case KBD_CCMD_READ_OUTPORT:
 287         kbd_queue(s, s->outport, 0);
 288         break;
 289     case KBD_CCMD_ENABLE_A20:
 290         if (s->a20_out) {
 291             qemu_irq_raise(*s->a20_out);
 292         }
 293         s->outport |= KBD_OUT_A20;
 294         break;
 295     case KBD_CCMD_DISABLE_A20:
 296         if (s->a20_out) {
 297             qemu_irq_lower(*s->a20_out);
 298         }
 299         s->outport &= ~KBD_OUT_A20;
 300         break;
 301     case KBD_CCMD_RESET:
 302         qemu_system_reset_request();
 303         break;
 304     case KBD_CCMD_NO_OP:
 305         /* ignore that */
 306         break;
 307     default:
 308         fprintf(stderr, "qemu: unsupported keyboard cmd=0x%02x\n", (int)val);
 309         break;
 310     }
 311 }
 312
 313 static uint64_t kbd_read_data(void *opaque, hwaddr addr,
 314                               unsigned size)
 315 {
 316     KBDState *s = opaque;
 317     uint32_t val;
 318
 319     if (s->pending == KBD_PENDING_AUX)
 320         val = ps2_read_data(s->mouse);
 321     else
 322         val = ps2_read_data(s->kbd);
 323
 324     DPRINTF("kbd: read data=0x%02x\n", val);
 325     return val;
 326 }
 327
 328 static void kbd_write_data(void *opaque, hwaddr addr,
 329                            uint64_t val, unsigned size)
 330 {
 331     KBDState *s = opaque;
 332
 333     DPRINTF("kbd: write data=0x%02x\n", val);
 334
 335     switch(s->write_cmd) {
 336     case 0:
 337         ps2_write_keyboard(s->kbd, val);
 338         break;
 339     case KBD_CCMD_WRITE_MODE:
 340         s->mode = val;
 341         ps2_keyboard_set_translation(s->kbd, (s->mode & KBD_MODE_KCC) != 0);
 342         /* ??? */
 343         kbd_update_irq(s);
 344         break;
 345     case KBD_CCMD_WRITE_OBUF:
 346         kbd_queue(s, val, 0);
 347         break;
 348     case KBD_CCMD_WRITE_AUX_OBUF:
 349         kbd_queue(s, val, 1);
 350         break;
 351     case KBD_CCMD_WRITE_OUTPORT:
 352         outport_write(s, val);
 353         break;
 354     case KBD_CCMD_WRITE_MOUSE:
 355         ps2_write_mouse(s->mouse, val);
 356         break;
 357     default:
 358         break;
 359     }
 360     s->write_cmd = 0;
 361 }
 362
 363 static void kbd_reset(void *opaque)
 364 {
 365     KBDState *s = opaque;
 366
 367     s->mode = KBD_MODE_KBD_INT | KBD_MODE_MOUSE_INT;
 368     s->status = KBD_STAT_CMD | KBD_STAT_UNLOCKED;
 369     s->outport = KBD_OUT_RESET | KBD_OUT_A20;
 370 }
 371
 372 static const VMStateDescription vmstate_kbd = {
 373     .name = "pckbd",
 374     .version_id = 3,
 375     .minimum_version_id = 3,
 376     .minimum_version_id_old = 3,
 377     .fields      = (VMStateField []) {
 378         VMSTATE_UINT8(write_cmd, KBDState),
 379         VMSTATE_UINT8(status, KBDState),
 380         VMSTATE_UINT8(mode, KBDState),
 381         VMSTATE_UINT8(pending, KBDState),
 382         VMSTATE_END_OF_LIST()
 383     }
 384 };
 385
 386 /* Memory mapped interface */
 387 static uint32_t kbd_mm_readb (void *opaque, hwaddr addr)
 388 {
 389     KBDState *s = opaque;
 390
 391     if (addr & s->mask)
 392         return kbd_read_status(s, 0, 1) & 0xff;
 393     else
 394         return kbd_read_data(s, 0, 1) & 0xff;
 395 }
 396
 397 static void kbd_mm_writeb (void *opaque, hwaddr addr, uint32_t value)
 398 {
 399     KBDState *s = opaque;
 400
 401     if (addr & s->mask)
 402         kbd_write_command(s, 0, value & 0xff, 1);
 403     else
 404         kbd_write_data(s, 0, value & 0xff, 1);
 405 }
 406
 407 static const MemoryRegionOps i8042_mmio_ops = {
 408     .endianness = DEVICE_NATIVE_ENDIAN,
 409     .old_mmio = {
 410         .read = { kbd_mm_readb, kbd_mm_readb, kbd_mm_readb },
 411         .write = { kbd_mm_writeb, kbd_mm_writeb, kbd_mm_writeb },
 412     },
 413 };
 414
 415 void i8042_mm_init(qemu_irq kbd_irq, qemu_irq mouse_irq,
 416                    MemoryRegion *region, ram_addr_t size,
 417                    hwaddr mask)
 418 {
 419     KBDState *s = g_malloc0(sizeof(KBDState));
 420
 421     s->irq_kbd = kbd_irq;
 422     s->irq_mouse = mouse_irq;
 423     s->mask = mask;
 424
 425     vmstate_register(NULL, 0, &vmstate_kbd, s);
 426
 427     memory_region_init_io(region, &i8042_mmio_ops, s, "i8042", size);
 428
 429     s->kbd = ps2_kbd_init(kbd_update_kbd_irq, s);
 430     s->mouse = ps2_mouse_init(kbd_update_aux_irq, s);
 431     qemu_register_reset(kbd_reset, s);
 432 }
 433
 434 typedef struct ISAKBDState {
 435     ISADevice dev;
 436     KBDState kbd;
 437     MemoryRegion io[2];
 438 } ISAKBDState;
 439
 440 void i8042_isa_mouse_fake_event(void *opaque)
 441 {
 442     ISADevice *dev = opaque;
 443     KBDState *s = &(DO_UPCAST(ISAKBDState, dev, dev)->kbd);
 444
 445     ps2_mouse_fake_event(s->mouse);
 446 }
 447
 448 void i8042_setup_a20_line(ISADevice *dev, qemu_irq *a20_out)
 449 {
 450     KBDState *s = &(DO_UPCAST(ISAKBDState, dev, dev)->kbd);
 451
 452     s->a20_out = a20_out;
 453 }
 454
 455 static const VMStateDescription vmstate_kbd_isa = {
 456     .name = "pckbd",
 457     .version_id = 3,
 458     .minimum_version_id = 3,
 459     .minimum_version_id_old = 3,
 460     .fields      = (VMStateField []) {
 461         VMSTATE_STRUCT(kbd, ISAKBDState, 0, vmstate_kbd, KBDState),
 462         VMSTATE_END_OF_LIST()
 463     }
 464 };
 465
 466 static const MemoryRegionOps i8042_data_ops = {
 467     .read = kbd_read_data,
 468     .write = kbd_write_data,
 469     .impl = {
 470         .min_access_size = 1,
 471         .max_access_size = 1,
 472     },
 473     .endianness = DEVICE_LITTLE_ENDIAN,
 474 };
 475
 476 static const MemoryRegionOps i8042_cmd_ops = {
 477     .read = kbd_read_status,
 478     .write = kbd_write_command,
 479     .impl = {
 480         .min_access_size = 1,
 481         .max_access_size = 1,
 482     },
 483     .endianness = DEVICE_LITTLE_ENDIAN,
 484 };
 485
 486 static int i8042_initfn(ISADevice *dev)
 487 {
 488     ISAKBDState *isa_s = DO_UPCAST(ISAKBDState, dev, dev);
 489     KBDState *s = &isa_s->kbd;
 490
 491     isa_init_irq(dev, &s->irq_kbd, 1);
 492     isa_init_irq(dev, &s->irq_mouse, 12);
 493
 494     memory_region_init_io(isa_s->io + 0, &i8042_data_ops, s, "i8042-data", 1);
 495     isa_register_ioport(dev, isa_s->io + 0, 0x60);
 496
 497     memory_region_init_io(isa_s->io + 1, &i8042_cmd_ops, s, "i8042-cmd", 1);
 498     isa_register_ioport(dev, isa_s->io + 1, 0x64);
 499
 500     s->kbd = ps2_kbd_init(kbd_update_kbd_irq, s);
 501     s->mouse = ps2_mouse_init(kbd_update_aux_irq, s);
 502     qemu_register_reset(kbd_reset, s);
 503     return 0;
 504 }
 505
 506 static void i8042_class_initfn(ObjectClass *klass, void *data)
 507 {
 508     DeviceClass *dc = DEVICE_CLASS(klass);
 509     ISADeviceClass *ic = ISA_DEVICE_CLASS(klass);
 510     ic->init = i8042_initfn;
 511     dc->no_user = 1;
 512     dc->vmsd = &vmstate_kbd_isa;
 513 }
 514
 515 static const TypeInfo i8042_info = {
 516     .name          = "i8042",
 517     .parent        = TYPE_ISA_DEVICE,
 518     .instance_size = sizeof(ISAKBDState),
 519     .class_init    = i8042_class_initfn,
 520 };
 521
 522 static void i8042_register_types(void)
 523 {
 524     type_register_static(&i8042_info);
 525 }
 526
 527 type_init(i8042_register_types)