2 * QEMU System Emulator block driver
4 * Copyright (c) 2003 Fabrice Bellard
6 * Permission is hereby granted, free of charge, to any person obtaining a copy
7 * of this software and associated documentation files (the "Software"), to deal
8 * in the Software without restriction, including without limitation the rights
9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10 * copies of the Software, and to permit persons to whom the Software is
11 * furnished to do so, subject to the following conditions:
13 * The above copyright notice and this permission notice shall be included in
14 * all copies or substantial portions of the Software.
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
24 #include "config-host.h"
25 #include "qemu-common.h"
27 #include "monitor/monitor.h"
28 #include "block/block_int.h"
29 #include "block/blockjob.h"
30 #include "qemu/module.h"
31 #include "qapi/qmp/qjson.h"
32 #include "sysemu/sysemu.h"
33 #include "qemu/notify.h"
34 #include "block/coroutine.h"
35 #include "qmp-commands.h"
36 #include "qemu/timer.h"
39 #include <sys/types.h>
41 #include <sys/ioctl.h>
42 #include <sys/queue.h>
52 #define NOT_DONE 0x7fffffff /* used while emulated sync operation in progress */
55 BDRV_REQ_COPY_ON_READ
= 0x1,
56 BDRV_REQ_ZERO_WRITE
= 0x2,
59 static void bdrv_dev_change_media_cb(BlockDriverState
*bs
, bool load
);
60 static BlockDriverAIOCB
*bdrv_aio_readv_em(BlockDriverState
*bs
,
61 int64_t sector_num
, QEMUIOVector
*qiov
, int nb_sectors
,
62 BlockDriverCompletionFunc
*cb
, void *opaque
);
63 static BlockDriverAIOCB
*bdrv_aio_writev_em(BlockDriverState
*bs
,
64 int64_t sector_num
, QEMUIOVector
*qiov
, int nb_sectors
,
65 BlockDriverCompletionFunc
*cb
, void *opaque
);
66 static int coroutine_fn
bdrv_co_readv_em(BlockDriverState
*bs
,
67 int64_t sector_num
, int nb_sectors
,
69 static int coroutine_fn
bdrv_co_writev_em(BlockDriverState
*bs
,
70 int64_t sector_num
, int nb_sectors
,
72 static int coroutine_fn
bdrv_co_do_readv(BlockDriverState
*bs
,
73 int64_t sector_num
, int nb_sectors
, QEMUIOVector
*qiov
,
74 BdrvRequestFlags flags
);
75 static int coroutine_fn
bdrv_co_do_writev(BlockDriverState
*bs
,
76 int64_t sector_num
, int nb_sectors
, QEMUIOVector
*qiov
,
77 BdrvRequestFlags flags
);
78 static BlockDriverAIOCB
*bdrv_co_aio_rw_vector(BlockDriverState
*bs
,
82 BlockDriverCompletionFunc
*cb
,
85 static void coroutine_fn
bdrv_co_do_rw(void *opaque
);
86 static int coroutine_fn
bdrv_co_do_write_zeroes(BlockDriverState
*bs
,
87 int64_t sector_num
, int nb_sectors
);
89 static bool bdrv_exceed_bps_limits(BlockDriverState
*bs
, int nb_sectors
,
90 bool is_write
, double elapsed_time
, uint64_t *wait
);
91 static bool bdrv_exceed_iops_limits(BlockDriverState
*bs
, bool is_write
,
92 double elapsed_time
, uint64_t *wait
);
93 static bool bdrv_exceed_io_limits(BlockDriverState
*bs
, int nb_sectors
,
94 bool is_write
, int64_t *wait
);
96 static QTAILQ_HEAD(, BlockDriverState
) bdrv_states
=
97 QTAILQ_HEAD_INITIALIZER(bdrv_states
);
99 static QLIST_HEAD(, BlockDriver
) bdrv_drivers
=
100 QLIST_HEAD_INITIALIZER(bdrv_drivers
);
102 /* The device to use for VM snapshots */
103 static BlockDriverState
*bs_snapshots
;
105 /* If non-zero, use only whitelisted block drivers */
106 static int use_bdrv_whitelist
;
109 static int is_windows_drive_prefix(const char *filename
)
111 return (((filename
[0] >= 'a' && filename
[0] <= 'z') ||
112 (filename
[0] >= 'A' && filename
[0] <= 'Z')) &&
116 int is_windows_drive(const char *filename
)
118 if (is_windows_drive_prefix(filename
) &&
121 if (strstart(filename
, "\\\\.\\", NULL
) ||
122 strstart(filename
, "//./", NULL
))
128 /* throttling disk I/O limits */
129 void bdrv_io_limits_disable(BlockDriverState
*bs
)
131 bs
->io_limits_enabled
= false;
133 while (qemu_co_queue_next(&bs
->throttled_reqs
));
135 if (bs
->block_timer
) {
136 qemu_del_timer(bs
->block_timer
);
137 qemu_free_timer(bs
->block_timer
);
138 bs
->block_timer
= NULL
;
144 memset(&bs
->io_base
, 0, sizeof(bs
->io_base
));
147 static void bdrv_block_timer(void *opaque
)
149 BlockDriverState
*bs
= opaque
;
151 qemu_co_queue_next(&bs
->throttled_reqs
);
154 void bdrv_io_limits_enable(BlockDriverState
*bs
)
156 qemu_co_queue_init(&bs
->throttled_reqs
);
157 bs
->block_timer
= qemu_new_timer_ns(vm_clock
, bdrv_block_timer
, bs
);
158 bs
->io_limits_enabled
= true;
161 bool bdrv_io_limits_enabled(BlockDriverState
*bs
)
163 BlockIOLimit
*io_limits
= &bs
->io_limits
;
164 return io_limits
->bps
[BLOCK_IO_LIMIT_READ
]
165 || io_limits
->bps
[BLOCK_IO_LIMIT_WRITE
]
166 || io_limits
->bps
[BLOCK_IO_LIMIT_TOTAL
]
167 || io_limits
->iops
[BLOCK_IO_LIMIT_READ
]
168 || io_limits
->iops
[BLOCK_IO_LIMIT_WRITE
]
169 || io_limits
->iops
[BLOCK_IO_LIMIT_TOTAL
];
172 static void bdrv_io_limits_intercept(BlockDriverState
*bs
,
173 bool is_write
, int nb_sectors
)
175 int64_t wait_time
= -1;
177 if (!qemu_co_queue_empty(&bs
->throttled_reqs
)) {
178 qemu_co_queue_wait(&bs
->throttled_reqs
);
181 /* In fact, we hope to keep each request's timing, in FIFO mode. The next
182 * throttled requests will not be dequeued until the current request is
183 * allowed to be serviced. So if the current request still exceeds the
184 * limits, it will be inserted to the head. All requests followed it will
185 * be still in throttled_reqs queue.
188 while (bdrv_exceed_io_limits(bs
, nb_sectors
, is_write
, &wait_time
)) {
189 qemu_mod_timer(bs
->block_timer
,
190 wait_time
+ qemu_get_clock_ns(vm_clock
));
191 qemu_co_queue_wait_insert_head(&bs
->throttled_reqs
);
194 qemu_co_queue_next(&bs
->throttled_reqs
);
197 /* check if the path starts with "<protocol>:" */
198 static int path_has_protocol(const char *path
)
203 if (is_windows_drive(path
) ||
204 is_windows_drive_prefix(path
)) {
207 p
= path
+ strcspn(path
, ":/\\");
209 p
= path
+ strcspn(path
, ":/");
215 int path_is_absolute(const char *path
)
218 /* specific case for names like: "\\.\d:" */
219 if (is_windows_drive(path
) || is_windows_drive_prefix(path
)) {
222 return (*path
== '/' || *path
== '\\');
224 return (*path
== '/');
228 /* if filename is absolute, just copy it to dest. Otherwise, build a
229 path to it by considering it is relative to base_path. URL are
231 void path_combine(char *dest
, int dest_size
,
232 const char *base_path
,
233 const char *filename
)
240 if (path_is_absolute(filename
)) {
241 pstrcpy(dest
, dest_size
, filename
);
243 p
= strchr(base_path
, ':');
248 p1
= strrchr(base_path
, '/');
252 p2
= strrchr(base_path
, '\\');
264 if (len
> dest_size
- 1)
266 memcpy(dest
, base_path
, len
);
268 pstrcat(dest
, dest_size
, filename
);
272 void bdrv_get_full_backing_filename(BlockDriverState
*bs
, char *dest
, size_t sz
)
274 if (bs
->backing_file
[0] == '\0' || path_has_protocol(bs
->backing_file
)) {
275 pstrcpy(dest
, sz
, bs
->backing_file
);
277 path_combine(dest
, sz
, bs
->filename
, bs
->backing_file
);
281 void bdrv_register(BlockDriver
*bdrv
)
283 /* Block drivers without coroutine functions need emulation */
284 if (!bdrv
->bdrv_co_readv
) {
285 bdrv
->bdrv_co_readv
= bdrv_co_readv_em
;
286 bdrv
->bdrv_co_writev
= bdrv_co_writev_em
;
288 /* bdrv_co_readv_em()/brdv_co_writev_em() work in terms of aio, so if
289 * the block driver lacks aio we need to emulate that too.
291 if (!bdrv
->bdrv_aio_readv
) {
292 /* add AIO emulation layer */
293 bdrv
->bdrv_aio_readv
= bdrv_aio_readv_em
;
294 bdrv
->bdrv_aio_writev
= bdrv_aio_writev_em
;
298 QLIST_INSERT_HEAD(&bdrv_drivers
, bdrv
, list
);
301 /* create a new block device (by default it is empty) */
302 BlockDriverState
*bdrv_new(const char *device_name
)
304 BlockDriverState
*bs
;
306 bs
= g_malloc0(sizeof(BlockDriverState
));
307 pstrcpy(bs
->device_name
, sizeof(bs
->device_name
), device_name
);
308 if (device_name
[0] != '\0') {
309 QTAILQ_INSERT_TAIL(&bdrv_states
, bs
, list
);
311 bdrv_iostatus_disable(bs
);
312 notifier_list_init(&bs
->close_notifiers
);
317 void bdrv_add_close_notifier(BlockDriverState
*bs
, Notifier
*notify
)
319 notifier_list_add(&bs
->close_notifiers
, notify
);
322 BlockDriver
*bdrv_find_format(const char *format_name
)
325 QLIST_FOREACH(drv1
, &bdrv_drivers
, list
) {
326 if (!strcmp(drv1
->format_name
, format_name
)) {
333 static int bdrv_is_whitelisted(BlockDriver
*drv
)
335 static const char *whitelist
[] = {
336 CONFIG_BDRV_WHITELIST
341 return 1; /* no whitelist, anything goes */
343 for (p
= whitelist
; *p
; p
++) {
344 if (!strcmp(drv
->format_name
, *p
)) {
351 BlockDriver
*bdrv_find_whitelisted_format(const char *format_name
)
353 BlockDriver
*drv
= bdrv_find_format(format_name
);
354 return drv
&& bdrv_is_whitelisted(drv
) ? drv
: NULL
;
357 typedef struct CreateCo
{
360 QEMUOptionParameter
*options
;
364 static void coroutine_fn
bdrv_create_co_entry(void *opaque
)
366 CreateCo
*cco
= opaque
;
369 cco
->ret
= cco
->drv
->bdrv_create(cco
->filename
, cco
->options
);
372 int bdrv_create(BlockDriver
*drv
, const char* filename
,
373 QEMUOptionParameter
*options
)
380 .filename
= g_strdup(filename
),
385 if (!drv
->bdrv_create
) {
390 if (qemu_in_coroutine()) {
391 /* Fast-path if already in coroutine context */
392 bdrv_create_co_entry(&cco
);
394 co
= qemu_coroutine_create(bdrv_create_co_entry
);
395 qemu_coroutine_enter(co
, &cco
);
396 while (cco
.ret
== NOT_DONE
) {
404 g_free(cco
.filename
);
408 int bdrv_create_file(const char* filename
, QEMUOptionParameter
*options
)
412 drv
= bdrv_find_protocol(filename
);
417 return bdrv_create(drv
, filename
, options
);
421 * Create a uniquely-named empty temporary file.
422 * Return 0 upon success, otherwise a negative errno value.
424 int get_tmp_filename(char *filename
, int size
)
427 char temp_dir
[MAX_PATH
];
428 /* GetTempFileName requires that its output buffer (4th param)
429 have length MAX_PATH or greater. */
430 assert(size
>= MAX_PATH
);
431 return (GetTempPath(MAX_PATH
, temp_dir
)
432 && GetTempFileName(temp_dir
, "qem", 0, filename
)
433 ? 0 : -GetLastError());
437 tmpdir
= getenv("TMPDIR");
440 if (snprintf(filename
, size
, "%s/vl.XXXXXX", tmpdir
) >= size
) {
443 fd
= mkstemp(filename
);
447 if (close(fd
) != 0) {
456 * Detect host devices. By convention, /dev/cdrom[N] is always
457 * recognized as a host CDROM.
459 static BlockDriver
*find_hdev_driver(const char *filename
)
461 int score_max
= 0, score
;
462 BlockDriver
*drv
= NULL
, *d
;
464 QLIST_FOREACH(d
, &bdrv_drivers
, list
) {
465 if (d
->bdrv_probe_device
) {
466 score
= d
->bdrv_probe_device(filename
);
467 if (score
> score_max
) {
477 BlockDriver
*bdrv_find_protocol(const char *filename
)
484 /* TODO Drivers without bdrv_file_open must be specified explicitly */
487 * XXX(hch): we really should not let host device detection
488 * override an explicit protocol specification, but moving this
489 * later breaks access to device names with colons in them.
490 * Thanks to the brain-dead persistent naming schemes on udev-
491 * based Linux systems those actually are quite common.
493 drv1
= find_hdev_driver(filename
);
498 if (!path_has_protocol(filename
)) {
499 return bdrv_find_format("file");
501 p
= strchr(filename
, ':');
504 if (len
> sizeof(protocol
) - 1)
505 len
= sizeof(protocol
) - 1;
506 memcpy(protocol
, filename
, len
);
507 protocol
[len
] = '\0';
508 QLIST_FOREACH(drv1
, &bdrv_drivers
, list
) {
509 if (drv1
->protocol_name
&&
510 !strcmp(drv1
->protocol_name
, protocol
)) {
517 static int find_image_format(BlockDriverState
*bs
, const char *filename
,
520 int score
, score_max
;
521 BlockDriver
*drv1
, *drv
;
525 /* Return the raw BlockDriver * to scsi-generic devices or empty drives */
526 if (bs
->sg
|| !bdrv_is_inserted(bs
) || bdrv_getlength(bs
) == 0) {
527 drv
= bdrv_find_format("raw");
535 ret
= bdrv_pread(bs
, 0, buf
, sizeof(buf
));
543 QLIST_FOREACH(drv1
, &bdrv_drivers
, list
) {
544 if (drv1
->bdrv_probe
) {
545 score
= drv1
->bdrv_probe(buf
, ret
, filename
);
546 if (score
> score_max
) {
560 * Set the current 'total_sectors' value
562 static int refresh_total_sectors(BlockDriverState
*bs
, int64_t hint
)
564 BlockDriver
*drv
= bs
->drv
;
566 /* Do not attempt drv->bdrv_getlength() on scsi-generic devices */
570 /* query actual device if possible, otherwise just trust the hint */
571 if (drv
->bdrv_getlength
) {
572 int64_t length
= drv
->bdrv_getlength(bs
);
576 hint
= length
>> BDRV_SECTOR_BITS
;
579 bs
->total_sectors
= hint
;
584 * Set open flags for a given discard mode
586 * Return 0 on success, -1 if the discard mode was invalid.
588 int bdrv_parse_discard_flags(const char *mode
, int *flags
)
590 *flags
&= ~BDRV_O_UNMAP
;
592 if (!strcmp(mode
, "off") || !strcmp(mode
, "ignore")) {
594 } else if (!strcmp(mode
, "on") || !strcmp(mode
, "unmap")) {
595 *flags
|= BDRV_O_UNMAP
;
604 * Set open flags for a given cache mode
606 * Return 0 on success, -1 if the cache mode was invalid.
608 int bdrv_parse_cache_flags(const char *mode
, int *flags
)
610 *flags
&= ~BDRV_O_CACHE_MASK
;
612 if (!strcmp(mode
, "off") || !strcmp(mode
, "none")) {
613 *flags
|= BDRV_O_NOCACHE
| BDRV_O_CACHE_WB
;
614 } else if (!strcmp(mode
, "directsync")) {
615 *flags
|= BDRV_O_NOCACHE
;
616 } else if (!strcmp(mode
, "writeback")) {
617 *flags
|= BDRV_O_CACHE_WB
;
618 } else if (!strcmp(mode
, "unsafe")) {
619 *flags
|= BDRV_O_CACHE_WB
;
620 *flags
|= BDRV_O_NO_FLUSH
;
621 } else if (!strcmp(mode
, "writethrough")) {
622 /* this is the default */
631 * The copy-on-read flag is actually a reference count so multiple users may
632 * use the feature without worrying about clobbering its previous state.
633 * Copy-on-read stays enabled until all users have called to disable it.
635 void bdrv_enable_copy_on_read(BlockDriverState
*bs
)
640 void bdrv_disable_copy_on_read(BlockDriverState
*bs
)
642 assert(bs
->copy_on_read
> 0);
646 static int bdrv_open_flags(BlockDriverState
*bs
, int flags
)
648 int open_flags
= flags
| BDRV_O_CACHE_WB
;
651 * Clear flags that are internal to the block layer before opening the
654 open_flags
&= ~(BDRV_O_SNAPSHOT
| BDRV_O_NO_BACKING
);
657 * Snapshots should be writable.
659 if (bs
->is_temporary
) {
660 open_flags
|= BDRV_O_RDWR
;
667 * Common part for opening disk images and files
669 static int bdrv_open_common(BlockDriverState
*bs
, BlockDriverState
*file
,
670 const char *filename
,
671 int flags
, BlockDriver
*drv
)
676 assert(bs
->file
== NULL
);
678 trace_bdrv_open_common(bs
, filename
, flags
, drv
->format_name
);
680 bs
->open_flags
= flags
;
681 bs
->buffer_alignment
= 512;
683 assert(bs
->copy_on_read
== 0); /* bdrv_new() and bdrv_close() make it so */
684 if ((flags
& BDRV_O_RDWR
) && (flags
& BDRV_O_COPY_ON_READ
)) {
685 bdrv_enable_copy_on_read(bs
);
688 pstrcpy(bs
->filename
, sizeof(bs
->filename
), filename
);
690 if (use_bdrv_whitelist
&& !bdrv_is_whitelisted(drv
)) {
695 bs
->opaque
= g_malloc0(drv
->instance_size
);
697 bs
->enable_write_cache
= !!(flags
& BDRV_O_CACHE_WB
);
698 open_flags
= bdrv_open_flags(bs
, flags
);
700 bs
->read_only
= !(open_flags
& BDRV_O_RDWR
);
702 /* Open the image, either directly or using a protocol */
703 if (drv
->bdrv_file_open
) {
708 ret
= drv
->bdrv_file_open(bs
, filename
, open_flags
);
711 assert(file
!= NULL
);
713 ret
= drv
->bdrv_open(bs
, open_flags
);
720 ret
= refresh_total_sectors(bs
, bs
->total_sectors
);
726 if (bs
->is_temporary
) {
741 * Opens a file using a protocol (file, host_device, nbd, ...)
743 int bdrv_file_open(BlockDriverState
**pbs
, const char *filename
, int flags
)
745 BlockDriverState
*bs
;
749 drv
= bdrv_find_protocol(filename
);
755 ret
= bdrv_open_common(bs
, NULL
, filename
, flags
, drv
);
765 int bdrv_open_backing_file(BlockDriverState
*bs
)
767 char backing_filename
[PATH_MAX
];
769 BlockDriver
*back_drv
= NULL
;
771 if (bs
->backing_hd
!= NULL
) {
775 bs
->open_flags
&= ~BDRV_O_NO_BACKING
;
776 if (bs
->backing_file
[0] == '\0') {
780 bs
->backing_hd
= bdrv_new("");
781 bdrv_get_full_backing_filename(bs
, backing_filename
,
782 sizeof(backing_filename
));
784 if (bs
->backing_format
[0] != '\0') {
785 back_drv
= bdrv_find_format(bs
->backing_format
);
788 /* backing files always opened read-only */
789 back_flags
= bs
->open_flags
& ~(BDRV_O_RDWR
| BDRV_O_SNAPSHOT
);
791 ret
= bdrv_open(bs
->backing_hd
, backing_filename
, back_flags
, back_drv
);
793 bdrv_delete(bs
->backing_hd
);
794 bs
->backing_hd
= NULL
;
795 bs
->open_flags
|= BDRV_O_NO_BACKING
;
802 * Opens a disk image (raw, qcow2, vmdk, ...)
804 int bdrv_open(BlockDriverState
*bs
, const char *filename
, int flags
,
808 /* TODO: extra byte is a hack to ensure MAX_PATH space on Windows. */
809 char tmp_filename
[PATH_MAX
+ 1];
810 BlockDriverState
*file
= NULL
;
812 if (flags
& BDRV_O_SNAPSHOT
) {
813 BlockDriverState
*bs1
;
816 BlockDriver
*bdrv_qcow2
;
817 QEMUOptionParameter
*options
;
818 char backing_filename
[PATH_MAX
];
820 /* if snapshot, we create a temporary backing file and open it
821 instead of opening 'filename' directly */
823 /* if there is a backing file, use it */
825 ret
= bdrv_open(bs1
, filename
, 0, drv
);
830 total_size
= bdrv_getlength(bs1
) & BDRV_SECTOR_MASK
;
832 if (bs1
->drv
&& bs1
->drv
->protocol_name
)
837 ret
= get_tmp_filename(tmp_filename
, sizeof(tmp_filename
));
842 /* Real path is meaningless for protocols */
844 snprintf(backing_filename
, sizeof(backing_filename
),
846 else if (!realpath(filename
, backing_filename
))
849 bdrv_qcow2
= bdrv_find_format("qcow2");
850 options
= parse_option_parameters("", bdrv_qcow2
->create_options
, NULL
);
852 set_option_parameter_int(options
, BLOCK_OPT_SIZE
, total_size
);
853 set_option_parameter(options
, BLOCK_OPT_BACKING_FILE
, backing_filename
);
855 set_option_parameter(options
, BLOCK_OPT_BACKING_FMT
,
859 ret
= bdrv_create(bdrv_qcow2
, tmp_filename
, options
);
860 free_option_parameters(options
);
865 filename
= tmp_filename
;
867 bs
->is_temporary
= 1;
870 /* Open image file without format layer */
871 if (flags
& BDRV_O_RDWR
) {
872 flags
|= BDRV_O_ALLOW_RDWR
;
875 ret
= bdrv_file_open(&file
, filename
, bdrv_open_flags(bs
, flags
));
880 /* Find the right image format driver */
882 ret
= find_image_format(file
, filename
, &drv
);
886 goto unlink_and_fail
;
890 ret
= bdrv_open_common(bs
, file
, filename
, flags
, drv
);
892 goto unlink_and_fail
;
895 if (bs
->file
!= file
) {
900 /* If there is a backing file, use it */
901 if ((flags
& BDRV_O_NO_BACKING
) == 0) {
902 ret
= bdrv_open_backing_file(bs
);
909 if (!bdrv_key_required(bs
)) {
910 bdrv_dev_change_media_cb(bs
, true);
913 /* throttling disk I/O limits */
914 if (bs
->io_limits_enabled
) {
915 bdrv_io_limits_enable(bs
);
924 if (bs
->is_temporary
) {
930 typedef struct BlockReopenQueueEntry
{
932 BDRVReopenState state
;
933 QSIMPLEQ_ENTRY(BlockReopenQueueEntry
) entry
;
934 } BlockReopenQueueEntry
;
937 * Adds a BlockDriverState to a simple queue for an atomic, transactional
938 * reopen of multiple devices.
940 * bs_queue can either be an existing BlockReopenQueue that has had QSIMPLE_INIT
941 * already performed, or alternatively may be NULL a new BlockReopenQueue will
942 * be created and initialized. This newly created BlockReopenQueue should be
943 * passed back in for subsequent calls that are intended to be of the same
946 * bs is the BlockDriverState to add to the reopen queue.
948 * flags contains the open flags for the associated bs
950 * returns a pointer to bs_queue, which is either the newly allocated
951 * bs_queue, or the existing bs_queue being used.
954 BlockReopenQueue
*bdrv_reopen_queue(BlockReopenQueue
*bs_queue
,
955 BlockDriverState
*bs
, int flags
)
959 BlockReopenQueueEntry
*bs_entry
;
960 if (bs_queue
== NULL
) {
961 bs_queue
= g_new0(BlockReopenQueue
, 1);
962 QSIMPLEQ_INIT(bs_queue
);
966 bdrv_reopen_queue(bs_queue
, bs
->file
, flags
);
969 bs_entry
= g_new0(BlockReopenQueueEntry
, 1);
970 QSIMPLEQ_INSERT_TAIL(bs_queue
, bs_entry
, entry
);
972 bs_entry
->state
.bs
= bs
;
973 bs_entry
->state
.flags
= flags
;
979 * Reopen multiple BlockDriverStates atomically & transactionally.
981 * The queue passed in (bs_queue) must have been built up previous
982 * via bdrv_reopen_queue().
984 * Reopens all BDS specified in the queue, with the appropriate
985 * flags. All devices are prepared for reopen, and failure of any
986 * device will cause all device changes to be abandonded, and intermediate
989 * If all devices prepare successfully, then the changes are committed
993 int bdrv_reopen_multiple(BlockReopenQueue
*bs_queue
, Error
**errp
)
996 BlockReopenQueueEntry
*bs_entry
, *next
;
997 Error
*local_err
= NULL
;
999 assert(bs_queue
!= NULL
);
1003 QSIMPLEQ_FOREACH(bs_entry
, bs_queue
, entry
) {
1004 if (bdrv_reopen_prepare(&bs_entry
->state
, bs_queue
, &local_err
)) {
1005 error_propagate(errp
, local_err
);
1008 bs_entry
->prepared
= true;
1011 /* If we reach this point, we have success and just need to apply the
1014 QSIMPLEQ_FOREACH(bs_entry
, bs_queue
, entry
) {
1015 bdrv_reopen_commit(&bs_entry
->state
);
1021 QSIMPLEQ_FOREACH_SAFE(bs_entry
, bs_queue
, entry
, next
) {
1022 if (ret
&& bs_entry
->prepared
) {
1023 bdrv_reopen_abort(&bs_entry
->state
);
1032 /* Reopen a single BlockDriverState with the specified flags. */
1033 int bdrv_reopen(BlockDriverState
*bs
, int bdrv_flags
, Error
**errp
)
1036 Error
*local_err
= NULL
;
1037 BlockReopenQueue
*queue
= bdrv_reopen_queue(NULL
, bs
, bdrv_flags
);
1039 ret
= bdrv_reopen_multiple(queue
, &local_err
);
1040 if (local_err
!= NULL
) {
1041 error_propagate(errp
, local_err
);
1048 * Prepares a BlockDriverState for reopen. All changes are staged in the
1049 * 'opaque' field of the BDRVReopenState, which is used and allocated by
1050 * the block driver layer .bdrv_reopen_prepare()
1052 * bs is the BlockDriverState to reopen
1053 * flags are the new open flags
1054 * queue is the reopen queue
1056 * Returns 0 on success, non-zero on error. On error errp will be set
1059 * On failure, bdrv_reopen_abort() will be called to clean up any data.
1060 * It is the responsibility of the caller to then call the abort() or
1061 * commit() for any other BDS that have been left in a prepare() state
1064 int bdrv_reopen_prepare(BDRVReopenState
*reopen_state
, BlockReopenQueue
*queue
,
1068 Error
*local_err
= NULL
;
1071 assert(reopen_state
!= NULL
);
1072 assert(reopen_state
->bs
->drv
!= NULL
);
1073 drv
= reopen_state
->bs
->drv
;
1075 /* if we are to stay read-only, do not allow permission change
1077 if (!(reopen_state
->bs
->open_flags
& BDRV_O_ALLOW_RDWR
) &&
1078 reopen_state
->flags
& BDRV_O_RDWR
) {
1079 error_set(errp
, QERR_DEVICE_IS_READ_ONLY
,
1080 reopen_state
->bs
->device_name
);
1085 ret
= bdrv_flush(reopen_state
->bs
);
1087 error_set(errp
, ERROR_CLASS_GENERIC_ERROR
, "Error (%s) flushing drive",
1092 if (drv
->bdrv_reopen_prepare
) {
1093 ret
= drv
->bdrv_reopen_prepare(reopen_state
, queue
, &local_err
);
1095 if (local_err
!= NULL
) {
1096 error_propagate(errp
, local_err
);
1098 error_set(errp
, QERR_OPEN_FILE_FAILED
,
1099 reopen_state
->bs
->filename
);
1104 /* It is currently mandatory to have a bdrv_reopen_prepare()
1105 * handler for each supported drv. */
1106 error_set(errp
, QERR_BLOCK_FORMAT_FEATURE_NOT_SUPPORTED
,
1107 drv
->format_name
, reopen_state
->bs
->device_name
,
1108 "reopening of file");
1120 * Takes the staged changes for the reopen from bdrv_reopen_prepare(), and
1121 * makes them final by swapping the staging BlockDriverState contents into
1122 * the active BlockDriverState contents.
1124 void bdrv_reopen_commit(BDRVReopenState
*reopen_state
)
1128 assert(reopen_state
!= NULL
);
1129 drv
= reopen_state
->bs
->drv
;
1130 assert(drv
!= NULL
);
1132 /* If there are any driver level actions to take */
1133 if (drv
->bdrv_reopen_commit
) {
1134 drv
->bdrv_reopen_commit(reopen_state
);
1137 /* set BDS specific flags now */
1138 reopen_state
->bs
->open_flags
= reopen_state
->flags
;
1139 reopen_state
->bs
->enable_write_cache
= !!(reopen_state
->flags
&
1141 reopen_state
->bs
->read_only
= !(reopen_state
->flags
& BDRV_O_RDWR
);
1145 * Abort the reopen, and delete and free the staged changes in
1148 void bdrv_reopen_abort(BDRVReopenState
*reopen_state
)
1152 assert(reopen_state
!= NULL
);
1153 drv
= reopen_state
->bs
->drv
;
1154 assert(drv
!= NULL
);
1156 if (drv
->bdrv_reopen_abort
) {
1157 drv
->bdrv_reopen_abort(reopen_state
);
1162 void bdrv_close(BlockDriverState
*bs
)
1166 block_job_cancel_sync(bs
->job
);
1169 notifier_list_notify(&bs
->close_notifiers
, bs
);
1172 if (bs
== bs_snapshots
) {
1173 bs_snapshots
= NULL
;
1175 if (bs
->backing_hd
) {
1176 bdrv_delete(bs
->backing_hd
);
1177 bs
->backing_hd
= NULL
;
1179 bs
->drv
->bdrv_close(bs
);
1182 if (bs
->is_temporary
) {
1183 unlink(bs
->filename
);
1188 bs
->copy_on_read
= 0;
1189 bs
->backing_file
[0] = '\0';
1190 bs
->backing_format
[0] = '\0';
1191 bs
->total_sectors
= 0;
1197 if (bs
->file
!= NULL
) {
1198 bdrv_delete(bs
->file
);
1203 bdrv_dev_change_media_cb(bs
, false);
1205 /*throttling disk I/O limits*/
1206 if (bs
->io_limits_enabled
) {
1207 bdrv_io_limits_disable(bs
);
1211 void bdrv_close_all(void)
1213 BlockDriverState
*bs
;
1215 QTAILQ_FOREACH(bs
, &bdrv_states
, list
) {
1221 * Wait for pending requests to complete across all BlockDriverStates
1223 * This function does not flush data to disk, use bdrv_flush_all() for that
1224 * after calling this function.
1226 * Note that completion of an asynchronous I/O operation can trigger any
1227 * number of other I/O operations on other devices---for example a coroutine
1228 * can be arbitrarily complex and a constant flow of I/O can come until the
1229 * coroutine is complete. Because of this, it is not possible to have a
1230 * function to drain a single device's I/O queue.
1232 void bdrv_drain_all(void)
1234 BlockDriverState
*bs
;
1238 busy
= qemu_aio_wait();
1240 /* FIXME: We do not have timer support here, so this is effectively
1243 QTAILQ_FOREACH(bs
, &bdrv_states
, list
) {
1244 if (!qemu_co_queue_empty(&bs
->throttled_reqs
)) {
1245 qemu_co_queue_restart_all(&bs
->throttled_reqs
);
1251 /* If requests are still pending there is a bug somewhere */
1252 QTAILQ_FOREACH(bs
, &bdrv_states
, list
) {
1253 assert(QLIST_EMPTY(&bs
->tracked_requests
));
1254 assert(qemu_co_queue_empty(&bs
->throttled_reqs
));
1258 /* make a BlockDriverState anonymous by removing from bdrv_state list.
1259 Also, NULL terminate the device_name to prevent double remove */
1260 void bdrv_make_anon(BlockDriverState
*bs
)
1262 if (bs
->device_name
[0] != '\0') {
1263 QTAILQ_REMOVE(&bdrv_states
, bs
, list
);
1265 bs
->device_name
[0] = '\0';
1268 static void bdrv_rebind(BlockDriverState
*bs
)
1270 if (bs
->drv
&& bs
->drv
->bdrv_rebind
) {
1271 bs
->drv
->bdrv_rebind(bs
);
1275 static void bdrv_move_feature_fields(BlockDriverState
*bs_dest
,
1276 BlockDriverState
*bs_src
)
1278 /* move some fields that need to stay attached to the device */
1279 bs_dest
->open_flags
= bs_src
->open_flags
;
1282 bs_dest
->dev_ops
= bs_src
->dev_ops
;
1283 bs_dest
->dev_opaque
= bs_src
->dev_opaque
;
1284 bs_dest
->dev
= bs_src
->dev
;
1285 bs_dest
->buffer_alignment
= bs_src
->buffer_alignment
;
1286 bs_dest
->copy_on_read
= bs_src
->copy_on_read
;
1288 bs_dest
->enable_write_cache
= bs_src
->enable_write_cache
;
1290 /* i/o timing parameters */
1291 bs_dest
->slice_time
= bs_src
->slice_time
;
1292 bs_dest
->slice_start
= bs_src
->slice_start
;
1293 bs_dest
->slice_end
= bs_src
->slice_end
;
1294 bs_dest
->io_limits
= bs_src
->io_limits
;
1295 bs_dest
->io_base
= bs_src
->io_base
;
1296 bs_dest
->throttled_reqs
= bs_src
->throttled_reqs
;
1297 bs_dest
->block_timer
= bs_src
->block_timer
;
1298 bs_dest
->io_limits_enabled
= bs_src
->io_limits_enabled
;
1301 bs_dest
->on_read_error
= bs_src
->on_read_error
;
1302 bs_dest
->on_write_error
= bs_src
->on_write_error
;
1305 bs_dest
->iostatus_enabled
= bs_src
->iostatus_enabled
;
1306 bs_dest
->iostatus
= bs_src
->iostatus
;
1309 bs_dest
->dirty_bitmap
= bs_src
->dirty_bitmap
;
1312 bs_dest
->in_use
= bs_src
->in_use
;
1313 bs_dest
->job
= bs_src
->job
;
1315 /* keep the same entry in bdrv_states */
1316 pstrcpy(bs_dest
->device_name
, sizeof(bs_dest
->device_name
),
1317 bs_src
->device_name
);
1318 bs_dest
->list
= bs_src
->list
;
1322 * Swap bs contents for two image chains while they are live,
1323 * while keeping required fields on the BlockDriverState that is
1324 * actually attached to a device.
1326 * This will modify the BlockDriverState fields, and swap contents
1327 * between bs_new and bs_old. Both bs_new and bs_old are modified.
1329 * bs_new is required to be anonymous.
1331 * This function does not create any image files.
1333 void bdrv_swap(BlockDriverState
*bs_new
, BlockDriverState
*bs_old
)
1335 BlockDriverState tmp
;
1337 /* bs_new must be anonymous and shouldn't have anything fancy enabled */
1338 assert(bs_new
->device_name
[0] == '\0');
1339 assert(bs_new
->dirty_bitmap
== NULL
);
1340 assert(bs_new
->job
== NULL
);
1341 assert(bs_new
->dev
== NULL
);
1342 assert(bs_new
->in_use
== 0);
1343 assert(bs_new
->io_limits_enabled
== false);
1344 assert(bs_new
->block_timer
== NULL
);
1350 /* there are some fields that should not be swapped, move them back */
1351 bdrv_move_feature_fields(&tmp
, bs_old
);
1352 bdrv_move_feature_fields(bs_old
, bs_new
);
1353 bdrv_move_feature_fields(bs_new
, &tmp
);
1355 /* bs_new shouldn't be in bdrv_states even after the swap! */
1356 assert(bs_new
->device_name
[0] == '\0');
1358 /* Check a few fields that should remain attached to the device */
1359 assert(bs_new
->dev
== NULL
);
1360 assert(bs_new
->job
== NULL
);
1361 assert(bs_new
->in_use
== 0);
1362 assert(bs_new
->io_limits_enabled
== false);
1363 assert(bs_new
->block_timer
== NULL
);
1365 bdrv_rebind(bs_new
);
1366 bdrv_rebind(bs_old
);
1370 * Add new bs contents at the top of an image chain while the chain is
1371 * live, while keeping required fields on the top layer.
1373 * This will modify the BlockDriverState fields, and swap contents
1374 * between bs_new and bs_top. Both bs_new and bs_top are modified.
1376 * bs_new is required to be anonymous.
1378 * This function does not create any image files.
1380 void bdrv_append(BlockDriverState
*bs_new
, BlockDriverState
*bs_top
)
1382 bdrv_swap(bs_new
, bs_top
);
1384 /* The contents of 'tmp' will become bs_top, as we are
1385 * swapping bs_new and bs_top contents. */
1386 bs_top
->backing_hd
= bs_new
;
1387 bs_top
->open_flags
&= ~BDRV_O_NO_BACKING
;
1388 pstrcpy(bs_top
->backing_file
, sizeof(bs_top
->backing_file
),
1390 pstrcpy(bs_top
->backing_format
, sizeof(bs_top
->backing_format
),
1391 bs_new
->drv
? bs_new
->drv
->format_name
: "");
1394 void bdrv_delete(BlockDriverState
*bs
)
1398 assert(!bs
->in_use
);
1400 /* remove from list, if necessary */
1405 assert(bs
!= bs_snapshots
);
1409 int bdrv_attach_dev(BlockDriverState
*bs
, void *dev
)
1410 /* TODO change to DeviceState *dev when all users are qdevified */
1416 bdrv_iostatus_reset(bs
);
1420 /* TODO qdevified devices don't use this, remove when devices are qdevified */
1421 void bdrv_attach_dev_nofail(BlockDriverState
*bs
, void *dev
)
1423 if (bdrv_attach_dev(bs
, dev
) < 0) {
1428 void bdrv_detach_dev(BlockDriverState
*bs
, void *dev
)
1429 /* TODO change to DeviceState *dev when all users are qdevified */
1431 assert(bs
->dev
== dev
);
1434 bs
->dev_opaque
= NULL
;
1435 bs
->buffer_alignment
= 512;
1438 /* TODO change to return DeviceState * when all users are qdevified */
1439 void *bdrv_get_attached_dev(BlockDriverState
*bs
)
1444 void bdrv_set_dev_ops(BlockDriverState
*bs
, const BlockDevOps
*ops
,
1448 bs
->dev_opaque
= opaque
;
1449 if (bdrv_dev_has_removable_media(bs
) && bs
== bs_snapshots
) {
1450 bs_snapshots
= NULL
;
1454 void bdrv_emit_qmp_error_event(const BlockDriverState
*bdrv
,
1455 enum MonitorEvent ev
,
1456 BlockErrorAction action
, bool is_read
)
1459 const char *action_str
;
1462 case BDRV_ACTION_REPORT
:
1463 action_str
= "report";
1465 case BDRV_ACTION_IGNORE
:
1466 action_str
= "ignore";
1468 case BDRV_ACTION_STOP
:
1469 action_str
= "stop";
1475 data
= qobject_from_jsonf("{ 'device': %s, 'action': %s, 'operation': %s }",
1478 is_read
? "read" : "write");
1479 monitor_protocol_event(ev
, data
);
1481 qobject_decref(data
);
1484 static void bdrv_emit_qmp_eject_event(BlockDriverState
*bs
, bool ejected
)
1488 data
= qobject_from_jsonf("{ 'device': %s, 'tray-open': %i }",
1489 bdrv_get_device_name(bs
), ejected
);
1490 monitor_protocol_event(QEVENT_DEVICE_TRAY_MOVED
, data
);
1492 qobject_decref(data
);
1495 static void bdrv_dev_change_media_cb(BlockDriverState
*bs
, bool load
)
1497 if (bs
->dev_ops
&& bs
->dev_ops
->change_media_cb
) {
1498 bool tray_was_closed
= !bdrv_dev_is_tray_open(bs
);
1499 bs
->dev_ops
->change_media_cb(bs
->dev_opaque
, load
);
1500 if (tray_was_closed
) {
1502 bdrv_emit_qmp_eject_event(bs
, true);
1506 bdrv_emit_qmp_eject_event(bs
, false);
1511 bool bdrv_dev_has_removable_media(BlockDriverState
*bs
)
1513 return !bs
->dev
|| (bs
->dev_ops
&& bs
->dev_ops
->change_media_cb
);
1516 void bdrv_dev_eject_request(BlockDriverState
*bs
, bool force
)
1518 if (bs
->dev_ops
&& bs
->dev_ops
->eject_request_cb
) {
1519 bs
->dev_ops
->eject_request_cb(bs
->dev_opaque
, force
);
1523 bool bdrv_dev_is_tray_open(BlockDriverState
*bs
)
1525 if (bs
->dev_ops
&& bs
->dev_ops
->is_tray_open
) {
1526 return bs
->dev_ops
->is_tray_open(bs
->dev_opaque
);
1531 static void bdrv_dev_resize_cb(BlockDriverState
*bs
)
1533 if (bs
->dev_ops
&& bs
->dev_ops
->resize_cb
) {
1534 bs
->dev_ops
->resize_cb(bs
->dev_opaque
);
1538 bool bdrv_dev_is_medium_locked(BlockDriverState
*bs
)
1540 if (bs
->dev_ops
&& bs
->dev_ops
->is_medium_locked
) {
1541 return bs
->dev_ops
->is_medium_locked(bs
->dev_opaque
);
1547 * Run consistency checks on an image
1549 * Returns 0 if the check could be completed (it doesn't mean that the image is
1550 * free of errors) or -errno when an internal error occurred. The results of the
1551 * check are stored in res.
1553 int bdrv_check(BlockDriverState
*bs
, BdrvCheckResult
*res
, BdrvCheckMode fix
)
1555 if (bs
->drv
->bdrv_check
== NULL
) {
1559 memset(res
, 0, sizeof(*res
));
1560 return bs
->drv
->bdrv_check(bs
, res
, fix
);
1563 #define COMMIT_BUF_SECTORS 2048
1565 /* commit COW file into the raw image */
1566 int bdrv_commit(BlockDriverState
*bs
)
1568 BlockDriver
*drv
= bs
->drv
;
1569 int64_t sector
, total_sectors
;
1570 int n
, ro
, open_flags
;
1573 char filename
[PATH_MAX
];
1578 if (!bs
->backing_hd
) {
1582 if (bdrv_in_use(bs
) || bdrv_in_use(bs
->backing_hd
)) {
1586 ro
= bs
->backing_hd
->read_only
;
1587 /* Use pstrcpy (not strncpy): filename must be NUL-terminated. */
1588 pstrcpy(filename
, sizeof(filename
), bs
->backing_hd
->filename
);
1589 open_flags
= bs
->backing_hd
->open_flags
;
1592 if (bdrv_reopen(bs
->backing_hd
, open_flags
| BDRV_O_RDWR
, NULL
)) {
1597 total_sectors
= bdrv_getlength(bs
) >> BDRV_SECTOR_BITS
;
1598 buf
= g_malloc(COMMIT_BUF_SECTORS
* BDRV_SECTOR_SIZE
);
1600 for (sector
= 0; sector
< total_sectors
; sector
+= n
) {
1601 if (bdrv_is_allocated(bs
, sector
, COMMIT_BUF_SECTORS
, &n
)) {
1603 if (bdrv_read(bs
, sector
, buf
, n
) != 0) {
1608 if (bdrv_write(bs
->backing_hd
, sector
, buf
, n
) != 0) {
1615 if (drv
->bdrv_make_empty
) {
1616 ret
= drv
->bdrv_make_empty(bs
);
1621 * Make sure all data we wrote to the backing device is actually
1625 bdrv_flush(bs
->backing_hd
);
1631 /* ignoring error return here */
1632 bdrv_reopen(bs
->backing_hd
, open_flags
& ~BDRV_O_RDWR
, NULL
);
1638 int bdrv_commit_all(void)
1640 BlockDriverState
*bs
;
1642 QTAILQ_FOREACH(bs
, &bdrv_states
, list
) {
1643 int ret
= bdrv_commit(bs
);
1651 struct BdrvTrackedRequest
{
1652 BlockDriverState
*bs
;
1656 QLIST_ENTRY(BdrvTrackedRequest
) list
;
1657 Coroutine
*co
; /* owner, used for deadlock detection */
1658 CoQueue wait_queue
; /* coroutines blocked on this request */
1662 * Remove an active request from the tracked requests list
1664 * This function should be called when a tracked request is completing.
1666 static void tracked_request_end(BdrvTrackedRequest
*req
)
1668 QLIST_REMOVE(req
, list
);
1669 qemu_co_queue_restart_all(&req
->wait_queue
);
1673 * Add an active request to the tracked requests list
1675 static void tracked_request_begin(BdrvTrackedRequest
*req
,
1676 BlockDriverState
*bs
,
1678 int nb_sectors
, bool is_write
)
1680 *req
= (BdrvTrackedRequest
){
1682 .sector_num
= sector_num
,
1683 .nb_sectors
= nb_sectors
,
1684 .is_write
= is_write
,
1685 .co
= qemu_coroutine_self(),
1688 qemu_co_queue_init(&req
->wait_queue
);
1690 QLIST_INSERT_HEAD(&bs
->tracked_requests
, req
, list
);
1694 * Round a region to cluster boundaries
1696 void bdrv_round_to_clusters(BlockDriverState
*bs
,
1697 int64_t sector_num
, int nb_sectors
,
1698 int64_t *cluster_sector_num
,
1699 int *cluster_nb_sectors
)
1701 BlockDriverInfo bdi
;
1703 if (bdrv_get_info(bs
, &bdi
) < 0 || bdi
.cluster_size
== 0) {
1704 *cluster_sector_num
= sector_num
;
1705 *cluster_nb_sectors
= nb_sectors
;
1707 int64_t c
= bdi
.cluster_size
/ BDRV_SECTOR_SIZE
;
1708 *cluster_sector_num
= QEMU_ALIGN_DOWN(sector_num
, c
);
1709 *cluster_nb_sectors
= QEMU_ALIGN_UP(sector_num
- *cluster_sector_num
+
1714 static bool tracked_request_overlaps(BdrvTrackedRequest
*req
,
1715 int64_t sector_num
, int nb_sectors
) {
1717 if (sector_num
>= req
->sector_num
+ req
->nb_sectors
) {
1721 if (req
->sector_num
>= sector_num
+ nb_sectors
) {
1727 static void coroutine_fn
wait_for_overlapping_requests(BlockDriverState
*bs
,
1728 int64_t sector_num
, int nb_sectors
)
1730 BdrvTrackedRequest
*req
;
1731 int64_t cluster_sector_num
;
1732 int cluster_nb_sectors
;
1735 /* If we touch the same cluster it counts as an overlap. This guarantees
1736 * that allocating writes will be serialized and not race with each other
1737 * for the same cluster. For example, in copy-on-read it ensures that the
1738 * CoR read and write operations are atomic and guest writes cannot
1739 * interleave between them.
1741 bdrv_round_to_clusters(bs
, sector_num
, nb_sectors
,
1742 &cluster_sector_num
, &cluster_nb_sectors
);
1746 QLIST_FOREACH(req
, &bs
->tracked_requests
, list
) {
1747 if (tracked_request_overlaps(req
, cluster_sector_num
,
1748 cluster_nb_sectors
)) {
1749 /* Hitting this means there was a reentrant request, for
1750 * example, a block driver issuing nested requests. This must
1751 * never happen since it means deadlock.
1753 assert(qemu_coroutine_self() != req
->co
);
1755 qemu_co_queue_wait(&req
->wait_queue
);
1766 * -EINVAL - backing format specified, but no file
1767 * -ENOSPC - can't update the backing file because no space is left in the
1769 * -ENOTSUP - format driver doesn't support changing the backing file
1771 int bdrv_change_backing_file(BlockDriverState
*bs
,
1772 const char *backing_file
, const char *backing_fmt
)
1774 BlockDriver
*drv
= bs
->drv
;
1777 /* Backing file format doesn't make sense without a backing file */
1778 if (backing_fmt
&& !backing_file
) {
1782 if (drv
->bdrv_change_backing_file
!= NULL
) {
1783 ret
= drv
->bdrv_change_backing_file(bs
, backing_file
, backing_fmt
);
1789 pstrcpy(bs
->backing_file
, sizeof(bs
->backing_file
), backing_file
?: "");
1790 pstrcpy(bs
->backing_format
, sizeof(bs
->backing_format
), backing_fmt
?: "");
1796 * Finds the image layer in the chain that has 'bs' as its backing file.
1798 * active is the current topmost image.
1800 * Returns NULL if bs is not found in active's image chain,
1801 * or if active == bs.
1803 BlockDriverState
*bdrv_find_overlay(BlockDriverState
*active
,
1804 BlockDriverState
*bs
)
1806 BlockDriverState
*overlay
= NULL
;
1807 BlockDriverState
*intermediate
;
1809 assert(active
!= NULL
);
1812 /* if bs is the same as active, then by definition it has no overlay
1818 intermediate
= active
;
1819 while (intermediate
->backing_hd
) {
1820 if (intermediate
->backing_hd
== bs
) {
1821 overlay
= intermediate
;
1824 intermediate
= intermediate
->backing_hd
;
1830 typedef struct BlkIntermediateStates
{
1831 BlockDriverState
*bs
;
1832 QSIMPLEQ_ENTRY(BlkIntermediateStates
) entry
;
1833 } BlkIntermediateStates
;
1837 * Drops images above 'base' up to and including 'top', and sets the image
1838 * above 'top' to have base as its backing file.
1840 * Requires that the overlay to 'top' is opened r/w, so that the backing file
1841 * information in 'bs' can be properly updated.
1843 * E.g., this will convert the following chain:
1844 * bottom <- base <- intermediate <- top <- active
1848 * bottom <- base <- active
1850 * It is allowed for bottom==base, in which case it converts:
1852 * base <- intermediate <- top <- active
1859 * if active == top, that is considered an error
1862 int bdrv_drop_intermediate(BlockDriverState
*active
, BlockDriverState
*top
,
1863 BlockDriverState
*base
)
1865 BlockDriverState
*intermediate
;
1866 BlockDriverState
*base_bs
= NULL
;
1867 BlockDriverState
*new_top_bs
= NULL
;
1868 BlkIntermediateStates
*intermediate_state
, *next
;
1871 QSIMPLEQ_HEAD(states_to_delete
, BlkIntermediateStates
) states_to_delete
;
1872 QSIMPLEQ_INIT(&states_to_delete
);
1874 if (!top
->drv
|| !base
->drv
) {
1878 new_top_bs
= bdrv_find_overlay(active
, top
);
1880 if (new_top_bs
== NULL
) {
1881 /* we could not find the image above 'top', this is an error */
1885 /* special case of new_top_bs->backing_hd already pointing to base - nothing
1886 * to do, no intermediate images */
1887 if (new_top_bs
->backing_hd
== base
) {
1894 /* now we will go down through the list, and add each BDS we find
1895 * into our deletion queue, until we hit the 'base'
1897 while (intermediate
) {
1898 intermediate_state
= g_malloc0(sizeof(BlkIntermediateStates
));
1899 intermediate_state
->bs
= intermediate
;
1900 QSIMPLEQ_INSERT_TAIL(&states_to_delete
, intermediate_state
, entry
);
1902 if (intermediate
->backing_hd
== base
) {
1903 base_bs
= intermediate
->backing_hd
;
1906 intermediate
= intermediate
->backing_hd
;
1908 if (base_bs
== NULL
) {
1909 /* something went wrong, we did not end at the base. safely
1910 * unravel everything, and exit with error */
1914 /* success - we can delete the intermediate states, and link top->base */
1915 ret
= bdrv_change_backing_file(new_top_bs
, base_bs
->filename
,
1916 base_bs
->drv
? base_bs
->drv
->format_name
: "");
1920 new_top_bs
->backing_hd
= base_bs
;
1923 QSIMPLEQ_FOREACH_SAFE(intermediate_state
, &states_to_delete
, entry
, next
) {
1924 /* so that bdrv_close() does not recursively close the chain */
1925 intermediate_state
->bs
->backing_hd
= NULL
;
1926 bdrv_delete(intermediate_state
->bs
);
1931 QSIMPLEQ_FOREACH_SAFE(intermediate_state
, &states_to_delete
, entry
, next
) {
1932 g_free(intermediate_state
);
1938 static int bdrv_check_byte_request(BlockDriverState
*bs
, int64_t offset
,
1943 if (!bdrv_is_inserted(bs
))
1949 len
= bdrv_getlength(bs
);
1954 if ((offset
> len
) || (len
- offset
< size
))
1960 static int bdrv_check_request(BlockDriverState
*bs
, int64_t sector_num
,
1963 return bdrv_check_byte_request(bs
, sector_num
* BDRV_SECTOR_SIZE
,
1964 nb_sectors
* BDRV_SECTOR_SIZE
);
1967 typedef struct RwCo
{
1968 BlockDriverState
*bs
;
1976 static void coroutine_fn
bdrv_rw_co_entry(void *opaque
)
1978 RwCo
*rwco
= opaque
;
1980 if (!rwco
->is_write
) {
1981 rwco
->ret
= bdrv_co_do_readv(rwco
->bs
, rwco
->sector_num
,
1982 rwco
->nb_sectors
, rwco
->qiov
, 0);
1984 rwco
->ret
= bdrv_co_do_writev(rwco
->bs
, rwco
->sector_num
,
1985 rwco
->nb_sectors
, rwco
->qiov
, 0);
1990 * Process a synchronous request using coroutines
1992 static int bdrv_rw_co(BlockDriverState
*bs
, int64_t sector_num
, uint8_t *buf
,
1993 int nb_sectors
, bool is_write
)
1996 struct iovec iov
= {
1997 .iov_base
= (void *)buf
,
1998 .iov_len
= nb_sectors
* BDRV_SECTOR_SIZE
,
2003 .sector_num
= sector_num
,
2004 .nb_sectors
= nb_sectors
,
2006 .is_write
= is_write
,
2010 qemu_iovec_init_external(&qiov
, &iov
, 1);
2013 * In sync call context, when the vcpu is blocked, this throttling timer
2014 * will not fire; so the I/O throttling function has to be disabled here
2015 * if it has been enabled.
2017 if (bs
->io_limits_enabled
) {
2018 fprintf(stderr
, "Disabling I/O throttling on '%s' due "
2019 "to synchronous I/O.\n", bdrv_get_device_name(bs
));
2020 bdrv_io_limits_disable(bs
);
2023 if (qemu_in_coroutine()) {
2024 /* Fast-path if already in coroutine context */
2025 bdrv_rw_co_entry(&rwco
);
2027 co
= qemu_coroutine_create(bdrv_rw_co_entry
);
2028 qemu_coroutine_enter(co
, &rwco
);
2029 while (rwco
.ret
== NOT_DONE
) {
2036 /* return < 0 if error. See bdrv_write() for the return codes */
2037 int bdrv_read(BlockDriverState
*bs
, int64_t sector_num
,
2038 uint8_t *buf
, int nb_sectors
)
2040 return bdrv_rw_co(bs
, sector_num
, buf
, nb_sectors
, false);
2043 /* Just like bdrv_read(), but with I/O throttling temporarily disabled */
2044 int bdrv_read_unthrottled(BlockDriverState
*bs
, int64_t sector_num
,
2045 uint8_t *buf
, int nb_sectors
)
2050 enabled
= bs
->io_limits_enabled
;
2051 bs
->io_limits_enabled
= false;
2052 ret
= bdrv_read(bs
, 0, buf
, 1);
2053 bs
->io_limits_enabled
= enabled
;
2057 /* Return < 0 if error. Important errors are:
2058 -EIO generic I/O error (may happen for all errors)
2059 -ENOMEDIUM No media inserted.
2060 -EINVAL Invalid sector number or nb_sectors
2061 -EACCES Trying to write a read-only device
2063 int bdrv_write(BlockDriverState
*bs
, int64_t sector_num
,
2064 const uint8_t *buf
, int nb_sectors
)
2066 return bdrv_rw_co(bs
, sector_num
, (uint8_t *)buf
, nb_sectors
, true);
2069 int bdrv_pread(BlockDriverState
*bs
, int64_t offset
,
2070 void *buf
, int count1
)
2072 uint8_t tmp_buf
[BDRV_SECTOR_SIZE
];
2073 int len
, nb_sectors
, count
;
2078 /* first read to align to sector start */
2079 len
= (BDRV_SECTOR_SIZE
- offset
) & (BDRV_SECTOR_SIZE
- 1);
2082 sector_num
= offset
>> BDRV_SECTOR_BITS
;
2084 if ((ret
= bdrv_read(bs
, sector_num
, tmp_buf
, 1)) < 0)
2086 memcpy(buf
, tmp_buf
+ (offset
& (BDRV_SECTOR_SIZE
- 1)), len
);
2094 /* read the sectors "in place" */
2095 nb_sectors
= count
>> BDRV_SECTOR_BITS
;
2096 if (nb_sectors
> 0) {
2097 if ((ret
= bdrv_read(bs
, sector_num
, buf
, nb_sectors
)) < 0)
2099 sector_num
+= nb_sectors
;
2100 len
= nb_sectors
<< BDRV_SECTOR_BITS
;
2105 /* add data from the last sector */
2107 if ((ret
= bdrv_read(bs
, sector_num
, tmp_buf
, 1)) < 0)
2109 memcpy(buf
, tmp_buf
, count
);
2114 int bdrv_pwrite(BlockDriverState
*bs
, int64_t offset
,
2115 const void *buf
, int count1
)
2117 uint8_t tmp_buf
[BDRV_SECTOR_SIZE
];
2118 int len
, nb_sectors
, count
;
2123 /* first write to align to sector start */
2124 len
= (BDRV_SECTOR_SIZE
- offset
) & (BDRV_SECTOR_SIZE
- 1);
2127 sector_num
= offset
>> BDRV_SECTOR_BITS
;
2129 if ((ret
= bdrv_read(bs
, sector_num
, tmp_buf
, 1)) < 0)
2131 memcpy(tmp_buf
+ (offset
& (BDRV_SECTOR_SIZE
- 1)), buf
, len
);
2132 if ((ret
= bdrv_write(bs
, sector_num
, tmp_buf
, 1)) < 0)
2141 /* write the sectors "in place" */
2142 nb_sectors
= count
>> BDRV_SECTOR_BITS
;
2143 if (nb_sectors
> 0) {
2144 if ((ret
= bdrv_write(bs
, sector_num
, buf
, nb_sectors
)) < 0)
2146 sector_num
+= nb_sectors
;
2147 len
= nb_sectors
<< BDRV_SECTOR_BITS
;
2152 /* add data from the last sector */
2154 if ((ret
= bdrv_read(bs
, sector_num
, tmp_buf
, 1)) < 0)
2156 memcpy(tmp_buf
, buf
, count
);
2157 if ((ret
= bdrv_write(bs
, sector_num
, tmp_buf
, 1)) < 0)
2164 * Writes to the file and ensures that no writes are reordered across this
2165 * request (acts as a barrier)
2167 * Returns 0 on success, -errno in error cases.
2169 int bdrv_pwrite_sync(BlockDriverState
*bs
, int64_t offset
,
2170 const void *buf
, int count
)
2174 ret
= bdrv_pwrite(bs
, offset
, buf
, count
);
2179 /* No flush needed for cache modes that already do it */
2180 if (bs
->enable_write_cache
) {
2187 static int coroutine_fn
bdrv_co_do_copy_on_readv(BlockDriverState
*bs
,
2188 int64_t sector_num
, int nb_sectors
, QEMUIOVector
*qiov
)
2190 /* Perform I/O through a temporary buffer so that users who scribble over
2191 * their read buffer while the operation is in progress do not end up
2192 * modifying the image file. This is critical for zero-copy guest I/O
2193 * where anything might happen inside guest memory.
2195 void *bounce_buffer
;
2197 BlockDriver
*drv
= bs
->drv
;
2199 QEMUIOVector bounce_qiov
;
2200 int64_t cluster_sector_num
;
2201 int cluster_nb_sectors
;
2205 /* Cover entire cluster so no additional backing file I/O is required when
2206 * allocating cluster in the image file.
2208 bdrv_round_to_clusters(bs
, sector_num
, nb_sectors
,
2209 &cluster_sector_num
, &cluster_nb_sectors
);
2211 trace_bdrv_co_do_copy_on_readv(bs
, sector_num
, nb_sectors
,
2212 cluster_sector_num
, cluster_nb_sectors
);
2214 iov
.iov_len
= cluster_nb_sectors
* BDRV_SECTOR_SIZE
;
2215 iov
.iov_base
= bounce_buffer
= qemu_blockalign(bs
, iov
.iov_len
);
2216 qemu_iovec_init_external(&bounce_qiov
, &iov
, 1);
2218 ret
= drv
->bdrv_co_readv(bs
, cluster_sector_num
, cluster_nb_sectors
,
2224 if (drv
->bdrv_co_write_zeroes
&&
2225 buffer_is_zero(bounce_buffer
, iov
.iov_len
)) {
2226 ret
= bdrv_co_do_write_zeroes(bs
, cluster_sector_num
,
2227 cluster_nb_sectors
);
2229 /* This does not change the data on the disk, it is not necessary
2230 * to flush even in cache=writethrough mode.
2232 ret
= drv
->bdrv_co_writev(bs
, cluster_sector_num
, cluster_nb_sectors
,
2237 /* It might be okay to ignore write errors for guest requests. If this
2238 * is a deliberate copy-on-read then we don't want to ignore the error.
2239 * Simply report it in all cases.
2244 skip_bytes
= (sector_num
- cluster_sector_num
) * BDRV_SECTOR_SIZE
;
2245 qemu_iovec_from_buf(qiov
, 0, bounce_buffer
+ skip_bytes
,
2246 nb_sectors
* BDRV_SECTOR_SIZE
);
2249 qemu_vfree(bounce_buffer
);
2254 * Handle a read request in coroutine context
2256 static int coroutine_fn
bdrv_co_do_readv(BlockDriverState
*bs
,
2257 int64_t sector_num
, int nb_sectors
, QEMUIOVector
*qiov
,
2258 BdrvRequestFlags flags
)
2260 BlockDriver
*drv
= bs
->drv
;
2261 BdrvTrackedRequest req
;
2267 if (bdrv_check_request(bs
, sector_num
, nb_sectors
)) {
2271 /* throttling disk read I/O */
2272 if (bs
->io_limits_enabled
) {
2273 bdrv_io_limits_intercept(bs
, false, nb_sectors
);
2276 if (bs
->copy_on_read
) {
2277 flags
|= BDRV_REQ_COPY_ON_READ
;
2279 if (flags
& BDRV_REQ_COPY_ON_READ
) {
2280 bs
->copy_on_read_in_flight
++;
2283 if (bs
->copy_on_read_in_flight
) {
2284 wait_for_overlapping_requests(bs
, sector_num
, nb_sectors
);
2287 tracked_request_begin(&req
, bs
, sector_num
, nb_sectors
, false);
2289 if (flags
& BDRV_REQ_COPY_ON_READ
) {
2292 ret
= bdrv_co_is_allocated(bs
, sector_num
, nb_sectors
, &pnum
);
2297 if (!ret
|| pnum
!= nb_sectors
) {
2298 ret
= bdrv_co_do_copy_on_readv(bs
, sector_num
, nb_sectors
, qiov
);
2303 ret
= drv
->bdrv_co_readv(bs
, sector_num
, nb_sectors
, qiov
);
2306 tracked_request_end(&req
);
2308 if (flags
& BDRV_REQ_COPY_ON_READ
) {
2309 bs
->copy_on_read_in_flight
--;
2315 int coroutine_fn
bdrv_co_readv(BlockDriverState
*bs
, int64_t sector_num
,
2316 int nb_sectors
, QEMUIOVector
*qiov
)
2318 trace_bdrv_co_readv(bs
, sector_num
, nb_sectors
);
2320 return bdrv_co_do_readv(bs
, sector_num
, nb_sectors
, qiov
, 0);
2323 int coroutine_fn
bdrv_co_copy_on_readv(BlockDriverState
*bs
,
2324 int64_t sector_num
, int nb_sectors
, QEMUIOVector
*qiov
)
2326 trace_bdrv_co_copy_on_readv(bs
, sector_num
, nb_sectors
);
2328 return bdrv_co_do_readv(bs
, sector_num
, nb_sectors
, qiov
,
2329 BDRV_REQ_COPY_ON_READ
);
2332 static int coroutine_fn
bdrv_co_do_write_zeroes(BlockDriverState
*bs
,
2333 int64_t sector_num
, int nb_sectors
)
2335 BlockDriver
*drv
= bs
->drv
;
2340 /* TODO Emulate only part of misaligned requests instead of letting block
2341 * drivers return -ENOTSUP and emulate everything */
2343 /* First try the efficient write zeroes operation */
2344 if (drv
->bdrv_co_write_zeroes
) {
2345 ret
= drv
->bdrv_co_write_zeroes(bs
, sector_num
, nb_sectors
);
2346 if (ret
!= -ENOTSUP
) {
2351 /* Fall back to bounce buffer if write zeroes is unsupported */
2352 iov
.iov_len
= nb_sectors
* BDRV_SECTOR_SIZE
;
2353 iov
.iov_base
= qemu_blockalign(bs
, iov
.iov_len
);
2354 memset(iov
.iov_base
, 0, iov
.iov_len
);
2355 qemu_iovec_init_external(&qiov
, &iov
, 1);
2357 ret
= drv
->bdrv_co_writev(bs
, sector_num
, nb_sectors
, &qiov
);
2359 qemu_vfree(iov
.iov_base
);
2364 * Handle a write request in coroutine context
2366 static int coroutine_fn
bdrv_co_do_writev(BlockDriverState
*bs
,
2367 int64_t sector_num
, int nb_sectors
, QEMUIOVector
*qiov
,
2368 BdrvRequestFlags flags
)
2370 BlockDriver
*drv
= bs
->drv
;
2371 BdrvTrackedRequest req
;
2377 if (bs
->read_only
) {
2380 if (bdrv_check_request(bs
, sector_num
, nb_sectors
)) {
2384 /* throttling disk write I/O */
2385 if (bs
->io_limits_enabled
) {
2386 bdrv_io_limits_intercept(bs
, true, nb_sectors
);
2389 if (bs
->copy_on_read_in_flight
) {
2390 wait_for_overlapping_requests(bs
, sector_num
, nb_sectors
);
2393 tracked_request_begin(&req
, bs
, sector_num
, nb_sectors
, true);
2395 if (flags
& BDRV_REQ_ZERO_WRITE
) {
2396 ret
= bdrv_co_do_write_zeroes(bs
, sector_num
, nb_sectors
);
2398 ret
= drv
->bdrv_co_writev(bs
, sector_num
, nb_sectors
, qiov
);
2401 if (ret
== 0 && !bs
->enable_write_cache
) {
2402 ret
= bdrv_co_flush(bs
);
2405 if (bs
->dirty_bitmap
) {
2406 bdrv_set_dirty(bs
, sector_num
, nb_sectors
);
2409 if (bs
->wr_highest_sector
< sector_num
+ nb_sectors
- 1) {
2410 bs
->wr_highest_sector
= sector_num
+ nb_sectors
- 1;
2413 tracked_request_end(&req
);
2418 int coroutine_fn
bdrv_co_writev(BlockDriverState
*bs
, int64_t sector_num
,
2419 int nb_sectors
, QEMUIOVector
*qiov
)
2421 trace_bdrv_co_writev(bs
, sector_num
, nb_sectors
);
2423 return bdrv_co_do_writev(bs
, sector_num
, nb_sectors
, qiov
, 0);
2426 int coroutine_fn
bdrv_co_write_zeroes(BlockDriverState
*bs
,
2427 int64_t sector_num
, int nb_sectors
)
2429 trace_bdrv_co_write_zeroes(bs
, sector_num
, nb_sectors
);
2431 return bdrv_co_do_writev(bs
, sector_num
, nb_sectors
, NULL
,
2432 BDRV_REQ_ZERO_WRITE
);
2436 * Truncate file to 'offset' bytes (needed only for file protocols)
2438 int bdrv_truncate(BlockDriverState
*bs
, int64_t offset
)
2440 BlockDriver
*drv
= bs
->drv
;
2444 if (!drv
->bdrv_truncate
)
2448 if (bdrv_in_use(bs
))
2451 /* There better not be any in-flight IOs when we truncate the device. */
2454 ret
= drv
->bdrv_truncate(bs
, offset
);
2456 ret
= refresh_total_sectors(bs
, offset
>> BDRV_SECTOR_BITS
);
2457 bdrv_dev_resize_cb(bs
);
2463 * Length of a allocated file in bytes. Sparse files are counted by actual
2464 * allocated space. Return < 0 if error or unknown.
2466 int64_t bdrv_get_allocated_file_size(BlockDriverState
*bs
)
2468 BlockDriver
*drv
= bs
->drv
;
2472 if (drv
->bdrv_get_allocated_file_size
) {
2473 return drv
->bdrv_get_allocated_file_size(bs
);
2476 return bdrv_get_allocated_file_size(bs
->file
);
2482 * Length of a file in bytes. Return < 0 if error or unknown.
2484 int64_t bdrv_getlength(BlockDriverState
*bs
)
2486 BlockDriver
*drv
= bs
->drv
;
2490 if (bs
->growable
|| bdrv_dev_has_removable_media(bs
)) {
2491 if (drv
->bdrv_getlength
) {
2492 return drv
->bdrv_getlength(bs
);
2495 return bs
->total_sectors
* BDRV_SECTOR_SIZE
;
2498 /* return 0 as number of sectors if no device present or error */
2499 void bdrv_get_geometry(BlockDriverState
*bs
, uint64_t *nb_sectors_ptr
)
2502 length
= bdrv_getlength(bs
);
2506 length
= length
>> BDRV_SECTOR_BITS
;
2507 *nb_sectors_ptr
= length
;
2510 /* throttling disk io limits */
2511 void bdrv_set_io_limits(BlockDriverState
*bs
,
2512 BlockIOLimit
*io_limits
)
2514 bs
->io_limits
= *io_limits
;
2515 bs
->io_limits_enabled
= bdrv_io_limits_enabled(bs
);
2518 void bdrv_set_on_error(BlockDriverState
*bs
, BlockdevOnError on_read_error
,
2519 BlockdevOnError on_write_error
)
2521 bs
->on_read_error
= on_read_error
;
2522 bs
->on_write_error
= on_write_error
;
2525 BlockdevOnError
bdrv_get_on_error(BlockDriverState
*bs
, bool is_read
)
2527 return is_read
? bs
->on_read_error
: bs
->on_write_error
;
2530 BlockErrorAction
bdrv_get_error_action(BlockDriverState
*bs
, bool is_read
, int error
)
2532 BlockdevOnError on_err
= is_read
? bs
->on_read_error
: bs
->on_write_error
;
2535 case BLOCKDEV_ON_ERROR_ENOSPC
:
2536 return (error
== ENOSPC
) ? BDRV_ACTION_STOP
: BDRV_ACTION_REPORT
;
2537 case BLOCKDEV_ON_ERROR_STOP
:
2538 return BDRV_ACTION_STOP
;
2539 case BLOCKDEV_ON_ERROR_REPORT
:
2540 return BDRV_ACTION_REPORT
;
2541 case BLOCKDEV_ON_ERROR_IGNORE
:
2542 return BDRV_ACTION_IGNORE
;
2548 /* This is done by device models because, while the block layer knows
2549 * about the error, it does not know whether an operation comes from
2550 * the device or the block layer (from a job, for example).
2552 void bdrv_error_action(BlockDriverState
*bs
, BlockErrorAction action
,
2553 bool is_read
, int error
)
2556 bdrv_emit_qmp_error_event(bs
, QEVENT_BLOCK_IO_ERROR
, action
, is_read
);
2557 if (action
== BDRV_ACTION_STOP
) {
2558 vm_stop(RUN_STATE_IO_ERROR
);
2559 bdrv_iostatus_set_err(bs
, error
);
2563 int bdrv_is_read_only(BlockDriverState
*bs
)
2565 return bs
->read_only
;
2568 int bdrv_is_sg(BlockDriverState
*bs
)
2573 int bdrv_enable_write_cache(BlockDriverState
*bs
)
2575 return bs
->enable_write_cache
;
2578 void bdrv_set_enable_write_cache(BlockDriverState
*bs
, bool wce
)
2580 bs
->enable_write_cache
= wce
;
2582 /* so a reopen() will preserve wce */
2584 bs
->open_flags
|= BDRV_O_CACHE_WB
;
2586 bs
->open_flags
&= ~BDRV_O_CACHE_WB
;
2590 int bdrv_is_encrypted(BlockDriverState
*bs
)
2592 if (bs
->backing_hd
&& bs
->backing_hd
->encrypted
)
2594 return bs
->encrypted
;
2597 int bdrv_key_required(BlockDriverState
*bs
)
2599 BlockDriverState
*backing_hd
= bs
->backing_hd
;
2601 if (backing_hd
&& backing_hd
->encrypted
&& !backing_hd
->valid_key
)
2603 return (bs
->encrypted
&& !bs
->valid_key
);
2606 int bdrv_set_key(BlockDriverState
*bs
, const char *key
)
2609 if (bs
->backing_hd
&& bs
->backing_hd
->encrypted
) {
2610 ret
= bdrv_set_key(bs
->backing_hd
, key
);
2616 if (!bs
->encrypted
) {
2618 } else if (!bs
->drv
|| !bs
->drv
->bdrv_set_key
) {
2621 ret
= bs
->drv
->bdrv_set_key(bs
, key
);
2624 } else if (!bs
->valid_key
) {
2626 /* call the change callback now, we skipped it on open */
2627 bdrv_dev_change_media_cb(bs
, true);
2632 const char *bdrv_get_format_name(BlockDriverState
*bs
)
2634 return bs
->drv
? bs
->drv
->format_name
: NULL
;
2637 void bdrv_iterate_format(void (*it
)(void *opaque
, const char *name
),
2642 QLIST_FOREACH(drv
, &bdrv_drivers
, list
) {
2643 it(opaque
, drv
->format_name
);
2647 BlockDriverState
*bdrv_find(const char *name
)
2649 BlockDriverState
*bs
;
2651 QTAILQ_FOREACH(bs
, &bdrv_states
, list
) {
2652 if (!strcmp(name
, bs
->device_name
)) {
2659 BlockDriverState
*bdrv_next(BlockDriverState
*bs
)
2662 return QTAILQ_FIRST(&bdrv_states
);
2664 return QTAILQ_NEXT(bs
, list
);
2667 void bdrv_iterate(void (*it
)(void *opaque
, BlockDriverState
*bs
), void *opaque
)
2669 BlockDriverState
*bs
;
2671 QTAILQ_FOREACH(bs
, &bdrv_states
, list
) {
2676 const char *bdrv_get_device_name(BlockDriverState
*bs
)
2678 return bs
->device_name
;
2681 int bdrv_get_flags(BlockDriverState
*bs
)
2683 return bs
->open_flags
;
2686 void bdrv_flush_all(void)
2688 BlockDriverState
*bs
;
2690 QTAILQ_FOREACH(bs
, &bdrv_states
, list
) {
2695 int bdrv_has_zero_init(BlockDriverState
*bs
)
2699 if (bs
->drv
->bdrv_has_zero_init
) {
2700 return bs
->drv
->bdrv_has_zero_init(bs
);
2706 typedef struct BdrvCoIsAllocatedData
{
2707 BlockDriverState
*bs
;
2708 BlockDriverState
*base
;
2714 } BdrvCoIsAllocatedData
;
2717 * Returns true iff the specified sector is present in the disk image. Drivers
2718 * not implementing the functionality are assumed to not support backing files,
2719 * hence all their sectors are reported as allocated.
2721 * If 'sector_num' is beyond the end of the disk image the return value is 0
2722 * and 'pnum' is set to 0.
2724 * 'pnum' is set to the number of sectors (including and immediately following
2725 * the specified sector) that are known to be in the same
2726 * allocated/unallocated state.
2728 * 'nb_sectors' is the max value 'pnum' should be set to. If nb_sectors goes
2729 * beyond the end of the disk image it will be clamped.
2731 int coroutine_fn
bdrv_co_is_allocated(BlockDriverState
*bs
, int64_t sector_num
,
2732 int nb_sectors
, int *pnum
)
2736 if (sector_num
>= bs
->total_sectors
) {
2741 n
= bs
->total_sectors
- sector_num
;
2742 if (n
< nb_sectors
) {
2746 if (!bs
->drv
->bdrv_co_is_allocated
) {
2751 return bs
->drv
->bdrv_co_is_allocated(bs
, sector_num
, nb_sectors
, pnum
);
2754 /* Coroutine wrapper for bdrv_is_allocated() */
2755 static void coroutine_fn
bdrv_is_allocated_co_entry(void *opaque
)
2757 BdrvCoIsAllocatedData
*data
= opaque
;
2758 BlockDriverState
*bs
= data
->bs
;
2760 data
->ret
= bdrv_co_is_allocated(bs
, data
->sector_num
, data
->nb_sectors
,
2766 * Synchronous wrapper around bdrv_co_is_allocated().
2768 * See bdrv_co_is_allocated() for details.
2770 int bdrv_is_allocated(BlockDriverState
*bs
, int64_t sector_num
, int nb_sectors
,
2774 BdrvCoIsAllocatedData data
= {
2776 .sector_num
= sector_num
,
2777 .nb_sectors
= nb_sectors
,
2782 co
= qemu_coroutine_create(bdrv_is_allocated_co_entry
);
2783 qemu_coroutine_enter(co
, &data
);
2784 while (!data
.done
) {
2791 * Given an image chain: ... -> [BASE] -> [INTER1] -> [INTER2] -> [TOP]
2793 * Return true if the given sector is allocated in any image between
2794 * BASE and TOP (inclusive). BASE can be NULL to check if the given
2795 * sector is allocated in any image of the chain. Return false otherwise.
2797 * 'pnum' is set to the number of sectors (including and immediately following
2798 * the specified sector) that are known to be in the same
2799 * allocated/unallocated state.
2802 int coroutine_fn
bdrv_co_is_allocated_above(BlockDriverState
*top
,
2803 BlockDriverState
*base
,
2805 int nb_sectors
, int *pnum
)
2807 BlockDriverState
*intermediate
;
2808 int ret
, n
= nb_sectors
;
2811 while (intermediate
&& intermediate
!= base
) {
2813 ret
= bdrv_co_is_allocated(intermediate
, sector_num
, nb_sectors
,
2823 * [sector_num, nb_sectors] is unallocated on top but intermediate
2826 * [sector_num+x, nr_sectors] allocated.
2828 if (n
> pnum_inter
&&
2829 (intermediate
== top
||
2830 sector_num
+ pnum_inter
< intermediate
->total_sectors
)) {
2834 intermediate
= intermediate
->backing_hd
;
2841 /* Coroutine wrapper for bdrv_is_allocated_above() */
2842 static void coroutine_fn
bdrv_is_allocated_above_co_entry(void *opaque
)
2844 BdrvCoIsAllocatedData
*data
= opaque
;
2845 BlockDriverState
*top
= data
->bs
;
2846 BlockDriverState
*base
= data
->base
;
2848 data
->ret
= bdrv_co_is_allocated_above(top
, base
, data
->sector_num
,
2849 data
->nb_sectors
, data
->pnum
);
2854 * Synchronous wrapper around bdrv_co_is_allocated_above().
2856 * See bdrv_co_is_allocated_above() for details.
2858 int bdrv_is_allocated_above(BlockDriverState
*top
, BlockDriverState
*base
,
2859 int64_t sector_num
, int nb_sectors
, int *pnum
)
2862 BdrvCoIsAllocatedData data
= {
2865 .sector_num
= sector_num
,
2866 .nb_sectors
= nb_sectors
,
2871 co
= qemu_coroutine_create(bdrv_is_allocated_above_co_entry
);
2872 qemu_coroutine_enter(co
, &data
);
2873 while (!data
.done
) {
2879 BlockInfo
*bdrv_query_info(BlockDriverState
*bs
)
2881 BlockInfo
*info
= g_malloc0(sizeof(*info
));
2882 info
->device
= g_strdup(bs
->device_name
);
2883 info
->type
= g_strdup("unknown");
2884 info
->locked
= bdrv_dev_is_medium_locked(bs
);
2885 info
->removable
= bdrv_dev_has_removable_media(bs
);
2887 if (bdrv_dev_has_removable_media(bs
)) {
2888 info
->has_tray_open
= true;
2889 info
->tray_open
= bdrv_dev_is_tray_open(bs
);
2892 if (bdrv_iostatus_is_enabled(bs
)) {
2893 info
->has_io_status
= true;
2894 info
->io_status
= bs
->iostatus
;
2897 if (bs
->dirty_bitmap
) {
2898 info
->has_dirty
= true;
2899 info
->dirty
= g_malloc0(sizeof(*info
->dirty
));
2900 info
->dirty
->count
= bdrv_get_dirty_count(bs
) * BDRV_SECTOR_SIZE
;
2901 info
->dirty
->granularity
=
2902 ((int64_t) BDRV_SECTOR_SIZE
<< hbitmap_granularity(bs
->dirty_bitmap
));
2906 info
->has_inserted
= true;
2907 info
->inserted
= g_malloc0(sizeof(*info
->inserted
));
2908 info
->inserted
->file
= g_strdup(bs
->filename
);
2909 info
->inserted
->ro
= bs
->read_only
;
2910 info
->inserted
->drv
= g_strdup(bs
->drv
->format_name
);
2911 info
->inserted
->encrypted
= bs
->encrypted
;
2912 info
->inserted
->encryption_key_missing
= bdrv_key_required(bs
);
2914 if (bs
->backing_file
[0]) {
2915 info
->inserted
->has_backing_file
= true;
2916 info
->inserted
->backing_file
= g_strdup(bs
->backing_file
);
2919 info
->inserted
->backing_file_depth
= bdrv_get_backing_file_depth(bs
);
2921 if (bs
->io_limits_enabled
) {
2922 info
->inserted
->bps
=
2923 bs
->io_limits
.bps
[BLOCK_IO_LIMIT_TOTAL
];
2924 info
->inserted
->bps_rd
=
2925 bs
->io_limits
.bps
[BLOCK_IO_LIMIT_READ
];
2926 info
->inserted
->bps_wr
=
2927 bs
->io_limits
.bps
[BLOCK_IO_LIMIT_WRITE
];
2928 info
->inserted
->iops
=
2929 bs
->io_limits
.iops
[BLOCK_IO_LIMIT_TOTAL
];
2930 info
->inserted
->iops_rd
=
2931 bs
->io_limits
.iops
[BLOCK_IO_LIMIT_READ
];
2932 info
->inserted
->iops_wr
=
2933 bs
->io_limits
.iops
[BLOCK_IO_LIMIT_WRITE
];
2939 BlockInfoList
*qmp_query_block(Error
**errp
)
2941 BlockInfoList
*head
= NULL
, **p_next
= &head
;
2942 BlockDriverState
*bs
;
2944 QTAILQ_FOREACH(bs
, &bdrv_states
, list
) {
2945 BlockInfoList
*info
= g_malloc0(sizeof(*info
));
2946 info
->value
= bdrv_query_info(bs
);
2949 p_next
= &info
->next
;
2955 BlockStats
*bdrv_query_stats(const BlockDriverState
*bs
)
2959 s
= g_malloc0(sizeof(*s
));
2961 if (bs
->device_name
[0]) {
2962 s
->has_device
= true;
2963 s
->device
= g_strdup(bs
->device_name
);
2966 s
->stats
= g_malloc0(sizeof(*s
->stats
));
2967 s
->stats
->rd_bytes
= bs
->nr_bytes
[BDRV_ACCT_READ
];
2968 s
->stats
->wr_bytes
= bs
->nr_bytes
[BDRV_ACCT_WRITE
];
2969 s
->stats
->rd_operations
= bs
->nr_ops
[BDRV_ACCT_READ
];
2970 s
->stats
->wr_operations
= bs
->nr_ops
[BDRV_ACCT_WRITE
];
2971 s
->stats
->wr_highest_offset
= bs
->wr_highest_sector
* BDRV_SECTOR_SIZE
;
2972 s
->stats
->flush_operations
= bs
->nr_ops
[BDRV_ACCT_FLUSH
];
2973 s
->stats
->wr_total_time_ns
= bs
->total_time_ns
[BDRV_ACCT_WRITE
];
2974 s
->stats
->rd_total_time_ns
= bs
->total_time_ns
[BDRV_ACCT_READ
];
2975 s
->stats
->flush_total_time_ns
= bs
->total_time_ns
[BDRV_ACCT_FLUSH
];
2978 s
->has_parent
= true;
2979 s
->parent
= bdrv_query_stats(bs
->file
);
2985 BlockStatsList
*qmp_query_blockstats(Error
**errp
)
2987 BlockStatsList
*head
= NULL
, **p_next
= &head
;
2988 BlockDriverState
*bs
;
2990 QTAILQ_FOREACH(bs
, &bdrv_states
, list
) {
2991 BlockStatsList
*info
= g_malloc0(sizeof(*info
));
2992 info
->value
= bdrv_query_stats(bs
);
2995 p_next
= &info
->next
;
3001 const char *bdrv_get_encrypted_filename(BlockDriverState
*bs
)
3003 if (bs
->backing_hd
&& bs
->backing_hd
->encrypted
)
3004 return bs
->backing_file
;
3005 else if (bs
->encrypted
)
3006 return bs
->filename
;
3011 void bdrv_get_backing_filename(BlockDriverState
*bs
,
3012 char *filename
, int filename_size
)
3014 pstrcpy(filename
, filename_size
, bs
->backing_file
);
3017 int bdrv_write_compressed(BlockDriverState
*bs
, int64_t sector_num
,
3018 const uint8_t *buf
, int nb_sectors
)
3020 BlockDriver
*drv
= bs
->drv
;
3023 if (!drv
->bdrv_write_compressed
)
3025 if (bdrv_check_request(bs
, sector_num
, nb_sectors
))
3028 assert(!bs
->dirty_bitmap
);
3030 return drv
->bdrv_write_compressed(bs
, sector_num
, buf
, nb_sectors
);
3033 int bdrv_get_info(BlockDriverState
*bs
, BlockDriverInfo
*bdi
)
3035 BlockDriver
*drv
= bs
->drv
;
3038 if (!drv
->bdrv_get_info
)
3040 memset(bdi
, 0, sizeof(*bdi
));
3041 return drv
->bdrv_get_info(bs
, bdi
);
3044 int bdrv_save_vmstate(BlockDriverState
*bs
, const uint8_t *buf
,
3045 int64_t pos
, int size
)
3047 BlockDriver
*drv
= bs
->drv
;
3050 if (drv
->bdrv_save_vmstate
)
3051 return drv
->bdrv_save_vmstate(bs
, buf
, pos
, size
);
3053 return bdrv_save_vmstate(bs
->file
, buf
, pos
, size
);
3057 int bdrv_load_vmstate(BlockDriverState
*bs
, uint8_t *buf
,
3058 int64_t pos
, int size
)
3060 BlockDriver
*drv
= bs
->drv
;
3063 if (drv
->bdrv_load_vmstate
)
3064 return drv
->bdrv_load_vmstate(bs
, buf
, pos
, size
);
3066 return bdrv_load_vmstate(bs
->file
, buf
, pos
, size
);
3070 void bdrv_debug_event(BlockDriverState
*bs
, BlkDebugEvent event
)
3072 BlockDriver
*drv
= bs
->drv
;
3074 if (!drv
|| !drv
->bdrv_debug_event
) {
3078 drv
->bdrv_debug_event(bs
, event
);
3081 int bdrv_debug_breakpoint(BlockDriverState
*bs
, const char *event
,
3084 while (bs
&& bs
->drv
&& !bs
->drv
->bdrv_debug_breakpoint
) {
3088 if (bs
&& bs
->drv
&& bs
->drv
->bdrv_debug_breakpoint
) {
3089 return bs
->drv
->bdrv_debug_breakpoint(bs
, event
, tag
);
3095 int bdrv_debug_resume(BlockDriverState
*bs
, const char *tag
)
3097 while (bs
&& bs
->drv
&& !bs
->drv
->bdrv_debug_resume
) {
3101 if (bs
&& bs
->drv
&& bs
->drv
->bdrv_debug_resume
) {
3102 return bs
->drv
->bdrv_debug_resume(bs
, tag
);
3108 bool bdrv_debug_is_suspended(BlockDriverState
*bs
, const char *tag
)
3110 while (bs
&& bs
->drv
&& !bs
->drv
->bdrv_debug_is_suspended
) {
3114 if (bs
&& bs
->drv
&& bs
->drv
->bdrv_debug_is_suspended
) {
3115 return bs
->drv
->bdrv_debug_is_suspended(bs
, tag
);
3121 /**************************************************************/
3122 /* handling of snapshots */
3124 int bdrv_can_snapshot(BlockDriverState
*bs
)
3126 BlockDriver
*drv
= bs
->drv
;
3127 if (!drv
|| !bdrv_is_inserted(bs
) || bdrv_is_read_only(bs
)) {
3131 if (!drv
->bdrv_snapshot_create
) {
3132 if (bs
->file
!= NULL
) {
3133 return bdrv_can_snapshot(bs
->file
);
3141 int bdrv_is_snapshot(BlockDriverState
*bs
)
3143 return !!(bs
->open_flags
& BDRV_O_SNAPSHOT
);
3146 BlockDriverState
*bdrv_snapshots(void)
3148 BlockDriverState
*bs
;
3151 return bs_snapshots
;
3155 while ((bs
= bdrv_next(bs
))) {
3156 if (bdrv_can_snapshot(bs
)) {
3164 int bdrv_snapshot_create(BlockDriverState
*bs
,
3165 QEMUSnapshotInfo
*sn_info
)
3167 BlockDriver
*drv
= bs
->drv
;
3170 if (drv
->bdrv_snapshot_create
)
3171 return drv
->bdrv_snapshot_create(bs
, sn_info
);
3173 return bdrv_snapshot_create(bs
->file
, sn_info
);
3177 int bdrv_snapshot_goto(BlockDriverState
*bs
,
3178 const char *snapshot_id
)
3180 BlockDriver
*drv
= bs
->drv
;
3185 if (drv
->bdrv_snapshot_goto
)
3186 return drv
->bdrv_snapshot_goto(bs
, snapshot_id
);
3189 drv
->bdrv_close(bs
);
3190 ret
= bdrv_snapshot_goto(bs
->file
, snapshot_id
);
3191 open_ret
= drv
->bdrv_open(bs
, bs
->open_flags
);
3193 bdrv_delete(bs
->file
);
3203 int bdrv_snapshot_delete(BlockDriverState
*bs
, const char *snapshot_id
)
3205 BlockDriver
*drv
= bs
->drv
;
3208 if (drv
->bdrv_snapshot_delete
)
3209 return drv
->bdrv_snapshot_delete(bs
, snapshot_id
);
3211 return bdrv_snapshot_delete(bs
->file
, snapshot_id
);
3215 int bdrv_snapshot_list(BlockDriverState
*bs
,
3216 QEMUSnapshotInfo
**psn_info
)
3218 BlockDriver
*drv
= bs
->drv
;
3221 if (drv
->bdrv_snapshot_list
)
3222 return drv
->bdrv_snapshot_list(bs
, psn_info
);
3224 return bdrv_snapshot_list(bs
->file
, psn_info
);
3228 int bdrv_snapshot_load_tmp(BlockDriverState
*bs
,
3229 const char *snapshot_name
)
3231 BlockDriver
*drv
= bs
->drv
;
3235 if (!bs
->read_only
) {
3238 if (drv
->bdrv_snapshot_load_tmp
) {
3239 return drv
->bdrv_snapshot_load_tmp(bs
, snapshot_name
);
3244 /* backing_file can either be relative, or absolute, or a protocol. If it is
3245 * relative, it must be relative to the chain. So, passing in bs->filename
3246 * from a BDS as backing_file should not be done, as that may be relative to
3247 * the CWD rather than the chain. */
3248 BlockDriverState
*bdrv_find_backing_image(BlockDriverState
*bs
,
3249 const char *backing_file
)
3251 char *filename_full
= NULL
;
3252 char *backing_file_full
= NULL
;
3253 char *filename_tmp
= NULL
;
3254 int is_protocol
= 0;
3255 BlockDriverState
*curr_bs
= NULL
;
3256 BlockDriverState
*retval
= NULL
;
3258 if (!bs
|| !bs
->drv
|| !backing_file
) {
3262 filename_full
= g_malloc(PATH_MAX
);
3263 backing_file_full
= g_malloc(PATH_MAX
);
3264 filename_tmp
= g_malloc(PATH_MAX
);
3266 is_protocol
= path_has_protocol(backing_file
);
3268 for (curr_bs
= bs
; curr_bs
->backing_hd
; curr_bs
= curr_bs
->backing_hd
) {
3270 /* If either of the filename paths is actually a protocol, then
3271 * compare unmodified paths; otherwise make paths relative */
3272 if (is_protocol
|| path_has_protocol(curr_bs
->backing_file
)) {
3273 if (strcmp(backing_file
, curr_bs
->backing_file
) == 0) {
3274 retval
= curr_bs
->backing_hd
;
3278 /* If not an absolute filename path, make it relative to the current
3279 * image's filename path */
3280 path_combine(filename_tmp
, PATH_MAX
, curr_bs
->filename
,
3283 /* We are going to compare absolute pathnames */
3284 if (!realpath(filename_tmp
, filename_full
)) {
3288 /* We need to make sure the backing filename we are comparing against
3289 * is relative to the current image filename (or absolute) */
3290 path_combine(filename_tmp
, PATH_MAX
, curr_bs
->filename
,
3291 curr_bs
->backing_file
);
3293 if (!realpath(filename_tmp
, backing_file_full
)) {
3297 if (strcmp(backing_file_full
, filename_full
) == 0) {
3298 retval
= curr_bs
->backing_hd
;
3304 g_free(filename_full
);
3305 g_free(backing_file_full
);
3306 g_free(filename_tmp
);
3310 int bdrv_get_backing_file_depth(BlockDriverState
*bs
)
3316 if (!bs
->backing_hd
) {
3320 return 1 + bdrv_get_backing_file_depth(bs
->backing_hd
);
3323 BlockDriverState
*bdrv_find_base(BlockDriverState
*bs
)
3325 BlockDriverState
*curr_bs
= NULL
;
3333 while (curr_bs
->backing_hd
) {
3334 curr_bs
= curr_bs
->backing_hd
;
3339 #define NB_SUFFIXES 4
3341 char *get_human_readable_size(char *buf
, int buf_size
, int64_t size
)
3343 static const char suffixes
[NB_SUFFIXES
] = "KMGT";
3348 snprintf(buf
, buf_size
, "%" PRId64
, size
);
3351 for(i
= 0; i
< NB_SUFFIXES
; i
++) {
3352 if (size
< (10 * base
)) {
3353 snprintf(buf
, buf_size
, "%0.1f%c",
3354 (double)size
/ base
,
3357 } else if (size
< (1000 * base
) || i
== (NB_SUFFIXES
- 1)) {
3358 snprintf(buf
, buf_size
, "%" PRId64
"%c",
3359 ((size
+ (base
>> 1)) / base
),
3369 char *bdrv_snapshot_dump(char *buf
, int buf_size
, QEMUSnapshotInfo
*sn
)
3371 char buf1
[128], date_buf
[128], clock_buf
[128];
3377 snprintf(buf
, buf_size
,
3378 "%-10s%-20s%7s%20s%15s",
3379 "ID", "TAG", "VM SIZE", "DATE", "VM CLOCK");
3382 localtime_r(&ti
, &tm
);
3383 strftime(date_buf
, sizeof(date_buf
),
3384 "%Y-%m-%d %H:%M:%S", &tm
);
3385 secs
= sn
->vm_clock_nsec
/ 1000000000;
3386 snprintf(clock_buf
, sizeof(clock_buf
),
3387 "%02d:%02d:%02d.%03d",
3389 (int)((secs
/ 60) % 60),
3391 (int)((sn
->vm_clock_nsec
/ 1000000) % 1000));
3392 snprintf(buf
, buf_size
,
3393 "%-10s%-20s%7s%20s%15s",
3394 sn
->id_str
, sn
->name
,
3395 get_human_readable_size(buf1
, sizeof(buf1
), sn
->vm_state_size
),
3402 /**************************************************************/
3405 BlockDriverAIOCB
*bdrv_aio_readv(BlockDriverState
*bs
, int64_t sector_num
,
3406 QEMUIOVector
*qiov
, int nb_sectors
,
3407 BlockDriverCompletionFunc
*cb
, void *opaque
)
3409 trace_bdrv_aio_readv(bs
, sector_num
, nb_sectors
, opaque
);
3411 return bdrv_co_aio_rw_vector(bs
, sector_num
, qiov
, nb_sectors
,
3415 BlockDriverAIOCB
*bdrv_aio_writev(BlockDriverState
*bs
, int64_t sector_num
,
3416 QEMUIOVector
*qiov
, int nb_sectors
,
3417 BlockDriverCompletionFunc
*cb
, void *opaque
)
3419 trace_bdrv_aio_writev(bs
, sector_num
, nb_sectors
, opaque
);
3421 return bdrv_co_aio_rw_vector(bs
, sector_num
, qiov
, nb_sectors
,
3426 typedef struct MultiwriteCB
{
3431 BlockDriverCompletionFunc
*cb
;
3433 QEMUIOVector
*free_qiov
;
3437 static void multiwrite_user_cb(MultiwriteCB
*mcb
)
3441 for (i
= 0; i
< mcb
->num_callbacks
; i
++) {
3442 mcb
->callbacks
[i
].cb(mcb
->callbacks
[i
].opaque
, mcb
->error
);
3443 if (mcb
->callbacks
[i
].free_qiov
) {
3444 qemu_iovec_destroy(mcb
->callbacks
[i
].free_qiov
);
3446 g_free(mcb
->callbacks
[i
].free_qiov
);
3450 static void multiwrite_cb(void *opaque
, int ret
)
3452 MultiwriteCB
*mcb
= opaque
;
3454 trace_multiwrite_cb(mcb
, ret
);
3456 if (ret
< 0 && !mcb
->error
) {
3460 mcb
->num_requests
--;
3461 if (mcb
->num_requests
== 0) {
3462 multiwrite_user_cb(mcb
);
3467 static int multiwrite_req_compare(const void *a
, const void *b
)
3469 const BlockRequest
*req1
= a
, *req2
= b
;
3472 * Note that we can't simply subtract req2->sector from req1->sector
3473 * here as that could overflow the return value.
3475 if (req1
->sector
> req2
->sector
) {
3477 } else if (req1
->sector
< req2
->sector
) {
3485 * Takes a bunch of requests and tries to merge them. Returns the number of
3486 * requests that remain after merging.
3488 static int multiwrite_merge(BlockDriverState
*bs
, BlockRequest
*reqs
,
3489 int num_reqs
, MultiwriteCB
*mcb
)
3493 // Sort requests by start sector
3494 qsort(reqs
, num_reqs
, sizeof(*reqs
), &multiwrite_req_compare
);
3496 // Check if adjacent requests touch the same clusters. If so, combine them,
3497 // filling up gaps with zero sectors.
3499 for (i
= 1; i
< num_reqs
; i
++) {
3501 int64_t oldreq_last
= reqs
[outidx
].sector
+ reqs
[outidx
].nb_sectors
;
3503 // Handle exactly sequential writes and overlapping writes.
3504 if (reqs
[i
].sector
<= oldreq_last
) {
3508 if (reqs
[outidx
].qiov
->niov
+ reqs
[i
].qiov
->niov
+ 1 > IOV_MAX
) {
3514 QEMUIOVector
*qiov
= g_malloc0(sizeof(*qiov
));
3515 qemu_iovec_init(qiov
,
3516 reqs
[outidx
].qiov
->niov
+ reqs
[i
].qiov
->niov
+ 1);
3518 // Add the first request to the merged one. If the requests are
3519 // overlapping, drop the last sectors of the first request.
3520 size
= (reqs
[i
].sector
- reqs
[outidx
].sector
) << 9;
3521 qemu_iovec_concat(qiov
, reqs
[outidx
].qiov
, 0, size
);
3523 // We should need to add any zeros between the two requests
3524 assert (reqs
[i
].sector
<= oldreq_last
);
3526 // Add the second request
3527 qemu_iovec_concat(qiov
, reqs
[i
].qiov
, 0, reqs
[i
].qiov
->size
);
3529 reqs
[outidx
].nb_sectors
= qiov
->size
>> 9;
3530 reqs
[outidx
].qiov
= qiov
;
3532 mcb
->callbacks
[i
].free_qiov
= reqs
[outidx
].qiov
;
3535 reqs
[outidx
].sector
= reqs
[i
].sector
;
3536 reqs
[outidx
].nb_sectors
= reqs
[i
].nb_sectors
;
3537 reqs
[outidx
].qiov
= reqs
[i
].qiov
;
3545 * Submit multiple AIO write requests at once.
3547 * On success, the function returns 0 and all requests in the reqs array have
3548 * been submitted. In error case this function returns -1, and any of the
3549 * requests may or may not be submitted yet. In particular, this means that the
3550 * callback will be called for some of the requests, for others it won't. The
3551 * caller must check the error field of the BlockRequest to wait for the right
3552 * callbacks (if error != 0, no callback will be called).
3554 * The implementation may modify the contents of the reqs array, e.g. to merge
3555 * requests. However, the fields opaque and error are left unmodified as they
3556 * are used to signal failure for a single request to the caller.
3558 int bdrv_aio_multiwrite(BlockDriverState
*bs
, BlockRequest
*reqs
, int num_reqs
)
3563 /* don't submit writes if we don't have a medium */
3564 if (bs
->drv
== NULL
) {
3565 for (i
= 0; i
< num_reqs
; i
++) {
3566 reqs
[i
].error
= -ENOMEDIUM
;
3571 if (num_reqs
== 0) {
3575 // Create MultiwriteCB structure
3576 mcb
= g_malloc0(sizeof(*mcb
) + num_reqs
* sizeof(*mcb
->callbacks
));
3577 mcb
->num_requests
= 0;
3578 mcb
->num_callbacks
= num_reqs
;
3580 for (i
= 0; i
< num_reqs
; i
++) {
3581 mcb
->callbacks
[i
].cb
= reqs
[i
].cb
;
3582 mcb
->callbacks
[i
].opaque
= reqs
[i
].opaque
;
3585 // Check for mergable requests
3586 num_reqs
= multiwrite_merge(bs
, reqs
, num_reqs
, mcb
);
3588 trace_bdrv_aio_multiwrite(mcb
, mcb
->num_callbacks
, num_reqs
);
3590 /* Run the aio requests. */
3591 mcb
->num_requests
= num_reqs
;
3592 for (i
= 0; i
< num_reqs
; i
++) {
3593 bdrv_aio_writev(bs
, reqs
[i
].sector
, reqs
[i
].qiov
,
3594 reqs
[i
].nb_sectors
, multiwrite_cb
, mcb
);
3600 void bdrv_aio_cancel(BlockDriverAIOCB
*acb
)
3602 acb
->aiocb_info
->cancel(acb
);
3605 /* block I/O throttling */
3606 static bool bdrv_exceed_bps_limits(BlockDriverState
*bs
, int nb_sectors
,
3607 bool is_write
, double elapsed_time
, uint64_t *wait
)
3609 uint64_t bps_limit
= 0;
3610 double bytes_limit
, bytes_base
, bytes_res
;
3611 double slice_time
, wait_time
;
3613 if (bs
->io_limits
.bps
[BLOCK_IO_LIMIT_TOTAL
]) {
3614 bps_limit
= bs
->io_limits
.bps
[BLOCK_IO_LIMIT_TOTAL
];
3615 } else if (bs
->io_limits
.bps
[is_write
]) {
3616 bps_limit
= bs
->io_limits
.bps
[is_write
];
3625 slice_time
= bs
->slice_end
- bs
->slice_start
;
3626 slice_time
/= (NANOSECONDS_PER_SECOND
);
3627 bytes_limit
= bps_limit
* slice_time
;
3628 bytes_base
= bs
->nr_bytes
[is_write
] - bs
->io_base
.bytes
[is_write
];
3629 if (bs
->io_limits
.bps
[BLOCK_IO_LIMIT_TOTAL
]) {
3630 bytes_base
+= bs
->nr_bytes
[!is_write
] - bs
->io_base
.bytes
[!is_write
];
3633 /* bytes_base: the bytes of data which have been read/written; and
3634 * it is obtained from the history statistic info.
3635 * bytes_res: the remaining bytes of data which need to be read/written.
3636 * (bytes_base + bytes_res) / bps_limit: used to calcuate
3637 * the total time for completing reading/writting all data.
3639 bytes_res
= (unsigned) nb_sectors
* BDRV_SECTOR_SIZE
;
3641 if (bytes_base
+ bytes_res
<= bytes_limit
) {
3649 /* Calc approx time to dispatch */
3650 wait_time
= (bytes_base
+ bytes_res
) / bps_limit
- elapsed_time
;
3652 /* When the I/O rate at runtime exceeds the limits,
3653 * bs->slice_end need to be extended in order that the current statistic
3654 * info can be kept until the timer fire, so it is increased and tuned
3655 * based on the result of experiment.
3657 bs
->slice_time
= wait_time
* BLOCK_IO_SLICE_TIME
* 10;
3658 bs
->slice_end
+= bs
->slice_time
- 3 * BLOCK_IO_SLICE_TIME
;
3660 *wait
= wait_time
* BLOCK_IO_SLICE_TIME
* 10;
3666 static bool bdrv_exceed_iops_limits(BlockDriverState
*bs
, bool is_write
,
3667 double elapsed_time
, uint64_t *wait
)
3669 uint64_t iops_limit
= 0;
3670 double ios_limit
, ios_base
;
3671 double slice_time
, wait_time
;
3673 if (bs
->io_limits
.iops
[BLOCK_IO_LIMIT_TOTAL
]) {
3674 iops_limit
= bs
->io_limits
.iops
[BLOCK_IO_LIMIT_TOTAL
];
3675 } else if (bs
->io_limits
.iops
[is_write
]) {
3676 iops_limit
= bs
->io_limits
.iops
[is_write
];
3685 slice_time
= bs
->slice_end
- bs
->slice_start
;
3686 slice_time
/= (NANOSECONDS_PER_SECOND
);
3687 ios_limit
= iops_limit
* slice_time
;
3688 ios_base
= bs
->nr_ops
[is_write
] - bs
->io_base
.ios
[is_write
];
3689 if (bs
->io_limits
.iops
[BLOCK_IO_LIMIT_TOTAL
]) {
3690 ios_base
+= bs
->nr_ops
[!is_write
] - bs
->io_base
.ios
[!is_write
];
3693 if (ios_base
+ 1 <= ios_limit
) {
3701 /* Calc approx time to dispatch */
3702 wait_time
= (ios_base
+ 1) / iops_limit
;
3703 if (wait_time
> elapsed_time
) {
3704 wait_time
= wait_time
- elapsed_time
;
3709 bs
->slice_time
= wait_time
* BLOCK_IO_SLICE_TIME
* 10;
3710 bs
->slice_end
+= bs
->slice_time
- 3 * BLOCK_IO_SLICE_TIME
;
3712 *wait
= wait_time
* BLOCK_IO_SLICE_TIME
* 10;
3718 static bool bdrv_exceed_io_limits(BlockDriverState
*bs
, int nb_sectors
,
3719 bool is_write
, int64_t *wait
)
3721 int64_t now
, max_wait
;
3722 uint64_t bps_wait
= 0, iops_wait
= 0;
3723 double elapsed_time
;
3724 int bps_ret
, iops_ret
;
3726 now
= qemu_get_clock_ns(vm_clock
);
3727 if ((bs
->slice_start
< now
)
3728 && (bs
->slice_end
> now
)) {
3729 bs
->slice_end
= now
+ bs
->slice_time
;
3731 bs
->slice_time
= 5 * BLOCK_IO_SLICE_TIME
;
3732 bs
->slice_start
= now
;
3733 bs
->slice_end
= now
+ bs
->slice_time
;
3735 bs
->io_base
.bytes
[is_write
] = bs
->nr_bytes
[is_write
];
3736 bs
->io_base
.bytes
[!is_write
] = bs
->nr_bytes
[!is_write
];
3738 bs
->io_base
.ios
[is_write
] = bs
->nr_ops
[is_write
];
3739 bs
->io_base
.ios
[!is_write
] = bs
->nr_ops
[!is_write
];
3742 elapsed_time
= now
- bs
->slice_start
;
3743 elapsed_time
/= (NANOSECONDS_PER_SECOND
);
3745 bps_ret
= bdrv_exceed_bps_limits(bs
, nb_sectors
,
3746 is_write
, elapsed_time
, &bps_wait
);
3747 iops_ret
= bdrv_exceed_iops_limits(bs
, is_write
,
3748 elapsed_time
, &iops_wait
);
3749 if (bps_ret
|| iops_ret
) {
3750 max_wait
= bps_wait
> iops_wait
? bps_wait
: iops_wait
;
3755 now
= qemu_get_clock_ns(vm_clock
);
3756 if (bs
->slice_end
< now
+ max_wait
) {
3757 bs
->slice_end
= now
+ max_wait
;
3770 /**************************************************************/
3771 /* async block device emulation */
3773 typedef struct BlockDriverAIOCBSync
{
3774 BlockDriverAIOCB common
;
3777 /* vector translation state */
3781 } BlockDriverAIOCBSync
;
3783 static void bdrv_aio_cancel_em(BlockDriverAIOCB
*blockacb
)
3785 BlockDriverAIOCBSync
*acb
=
3786 container_of(blockacb
, BlockDriverAIOCBSync
, common
);
3787 qemu_bh_delete(acb
->bh
);
3789 qemu_aio_release(acb
);
3792 static const AIOCBInfo bdrv_em_aiocb_info
= {
3793 .aiocb_size
= sizeof(BlockDriverAIOCBSync
),
3794 .cancel
= bdrv_aio_cancel_em
,
3797 static void bdrv_aio_bh_cb(void *opaque
)
3799 BlockDriverAIOCBSync
*acb
= opaque
;
3802 qemu_iovec_from_buf(acb
->qiov
, 0, acb
->bounce
, acb
->qiov
->size
);
3803 qemu_vfree(acb
->bounce
);
3804 acb
->common
.cb(acb
->common
.opaque
, acb
->ret
);
3805 qemu_bh_delete(acb
->bh
);
3807 qemu_aio_release(acb
);
3810 static BlockDriverAIOCB
*bdrv_aio_rw_vector(BlockDriverState
*bs
,
3814 BlockDriverCompletionFunc
*cb
,
3819 BlockDriverAIOCBSync
*acb
;
3821 acb
= qemu_aio_get(&bdrv_em_aiocb_info
, bs
, cb
, opaque
);
3822 acb
->is_write
= is_write
;
3824 acb
->bounce
= qemu_blockalign(bs
, qiov
->size
);
3825 acb
->bh
= qemu_bh_new(bdrv_aio_bh_cb
, acb
);
3828 qemu_iovec_to_buf(acb
->qiov
, 0, acb
->bounce
, qiov
->size
);
3829 acb
->ret
= bs
->drv
->bdrv_write(bs
, sector_num
, acb
->bounce
, nb_sectors
);
3831 acb
->ret
= bs
->drv
->bdrv_read(bs
, sector_num
, acb
->bounce
, nb_sectors
);
3834 qemu_bh_schedule(acb
->bh
);
3836 return &acb
->common
;
3839 static BlockDriverAIOCB
*bdrv_aio_readv_em(BlockDriverState
*bs
,
3840 int64_t sector_num
, QEMUIOVector
*qiov
, int nb_sectors
,
3841 BlockDriverCompletionFunc
*cb
, void *opaque
)
3843 return bdrv_aio_rw_vector(bs
, sector_num
, qiov
, nb_sectors
, cb
, opaque
, 0);
3846 static BlockDriverAIOCB
*bdrv_aio_writev_em(BlockDriverState
*bs
,
3847 int64_t sector_num
, QEMUIOVector
*qiov
, int nb_sectors
,
3848 BlockDriverCompletionFunc
*cb
, void *opaque
)
3850 return bdrv_aio_rw_vector(bs
, sector_num
, qiov
, nb_sectors
, cb
, opaque
, 1);
3854 typedef struct BlockDriverAIOCBCoroutine
{
3855 BlockDriverAIOCB common
;
3860 } BlockDriverAIOCBCoroutine
;
3862 static void bdrv_aio_co_cancel_em(BlockDriverAIOCB
*blockacb
)
3864 BlockDriverAIOCBCoroutine
*acb
=
3865 container_of(blockacb
, BlockDriverAIOCBCoroutine
, common
);
3874 static const AIOCBInfo bdrv_em_co_aiocb_info
= {
3875 .aiocb_size
= sizeof(BlockDriverAIOCBCoroutine
),
3876 .cancel
= bdrv_aio_co_cancel_em
,
3879 static void bdrv_co_em_bh(void *opaque
)
3881 BlockDriverAIOCBCoroutine
*acb
= opaque
;
3883 acb
->common
.cb(acb
->common
.opaque
, acb
->req
.error
);
3889 qemu_bh_delete(acb
->bh
);
3890 qemu_aio_release(acb
);
3893 /* Invoke bdrv_co_do_readv/bdrv_co_do_writev */
3894 static void coroutine_fn
bdrv_co_do_rw(void *opaque
)
3896 BlockDriverAIOCBCoroutine
*acb
= opaque
;
3897 BlockDriverState
*bs
= acb
->common
.bs
;
3899 if (!acb
->is_write
) {
3900 acb
->req
.error
= bdrv_co_do_readv(bs
, acb
->req
.sector
,
3901 acb
->req
.nb_sectors
, acb
->req
.qiov
, 0);
3903 acb
->req
.error
= bdrv_co_do_writev(bs
, acb
->req
.sector
,
3904 acb
->req
.nb_sectors
, acb
->req
.qiov
, 0);
3907 acb
->bh
= qemu_bh_new(bdrv_co_em_bh
, acb
);
3908 qemu_bh_schedule(acb
->bh
);
3911 static BlockDriverAIOCB
*bdrv_co_aio_rw_vector(BlockDriverState
*bs
,
3915 BlockDriverCompletionFunc
*cb
,
3920 BlockDriverAIOCBCoroutine
*acb
;
3922 acb
= qemu_aio_get(&bdrv_em_co_aiocb_info
, bs
, cb
, opaque
);
3923 acb
->req
.sector
= sector_num
;
3924 acb
->req
.nb_sectors
= nb_sectors
;
3925 acb
->req
.qiov
= qiov
;
3926 acb
->is_write
= is_write
;
3929 co
= qemu_coroutine_create(bdrv_co_do_rw
);
3930 qemu_coroutine_enter(co
, acb
);
3932 return &acb
->common
;
3935 static void coroutine_fn
bdrv_aio_flush_co_entry(void *opaque
)
3937 BlockDriverAIOCBCoroutine
*acb
= opaque
;
3938 BlockDriverState
*bs
= acb
->common
.bs
;
3940 acb
->req
.error
= bdrv_co_flush(bs
);
3941 acb
->bh
= qemu_bh_new(bdrv_co_em_bh
, acb
);
3942 qemu_bh_schedule(acb
->bh
);
3945 BlockDriverAIOCB
*bdrv_aio_flush(BlockDriverState
*bs
,
3946 BlockDriverCompletionFunc
*cb
, void *opaque
)
3948 trace_bdrv_aio_flush(bs
, opaque
);
3951 BlockDriverAIOCBCoroutine
*acb
;
3953 acb
= qemu_aio_get(&bdrv_em_co_aiocb_info
, bs
, cb
, opaque
);
3956 co
= qemu_coroutine_create(bdrv_aio_flush_co_entry
);
3957 qemu_coroutine_enter(co
, acb
);
3959 return &acb
->common
;
3962 static void coroutine_fn
bdrv_aio_discard_co_entry(void *opaque
)
3964 BlockDriverAIOCBCoroutine
*acb
= opaque
;
3965 BlockDriverState
*bs
= acb
->common
.bs
;
3967 acb
->req
.error
= bdrv_co_discard(bs
, acb
->req
.sector
, acb
->req
.nb_sectors
);
3968 acb
->bh
= qemu_bh_new(bdrv_co_em_bh
, acb
);
3969 qemu_bh_schedule(acb
->bh
);
3972 BlockDriverAIOCB
*bdrv_aio_discard(BlockDriverState
*bs
,
3973 int64_t sector_num
, int nb_sectors
,
3974 BlockDriverCompletionFunc
*cb
, void *opaque
)
3977 BlockDriverAIOCBCoroutine
*acb
;
3979 trace_bdrv_aio_discard(bs
, sector_num
, nb_sectors
, opaque
);
3981 acb
= qemu_aio_get(&bdrv_em_co_aiocb_info
, bs
, cb
, opaque
);
3982 acb
->req
.sector
= sector_num
;
3983 acb
->req
.nb_sectors
= nb_sectors
;
3985 co
= qemu_coroutine_create(bdrv_aio_discard_co_entry
);
3986 qemu_coroutine_enter(co
, acb
);
3988 return &acb
->common
;
3991 void bdrv_init(void)
3993 module_call_init(MODULE_INIT_BLOCK
);
3996 void bdrv_init_with_whitelist(void)
3998 use_bdrv_whitelist
= 1;
4002 void *qemu_aio_get(const AIOCBInfo
*aiocb_info
, BlockDriverState
*bs
,
4003 BlockDriverCompletionFunc
*cb
, void *opaque
)
4005 BlockDriverAIOCB
*acb
;
4007 acb
= g_slice_alloc(aiocb_info
->aiocb_size
);
4008 acb
->aiocb_info
= aiocb_info
;
4011 acb
->opaque
= opaque
;
4015 void qemu_aio_release(void *p
)
4017 BlockDriverAIOCB
*acb
= p
;
4018 g_slice_free1(acb
->aiocb_info
->aiocb_size
, acb
);
4021 /**************************************************************/
4022 /* Coroutine block device emulation */
4024 typedef struct CoroutineIOCompletion
{
4025 Coroutine
*coroutine
;
4027 } CoroutineIOCompletion
;
4029 static void bdrv_co_io_em_complete(void *opaque
, int ret
)
4031 CoroutineIOCompletion
*co
= opaque
;
4034 qemu_coroutine_enter(co
->coroutine
, NULL
);
4037 static int coroutine_fn
bdrv_co_io_em(BlockDriverState
*bs
, int64_t sector_num
,
4038 int nb_sectors
, QEMUIOVector
*iov
,
4041 CoroutineIOCompletion co
= {
4042 .coroutine
= qemu_coroutine_self(),
4044 BlockDriverAIOCB
*acb
;
4047 acb
= bs
->drv
->bdrv_aio_writev(bs
, sector_num
, iov
, nb_sectors
,
4048 bdrv_co_io_em_complete
, &co
);
4050 acb
= bs
->drv
->bdrv_aio_readv(bs
, sector_num
, iov
, nb_sectors
,
4051 bdrv_co_io_em_complete
, &co
);
4054 trace_bdrv_co_io_em(bs
, sector_num
, nb_sectors
, is_write
, acb
);
4058 qemu_coroutine_yield();
4063 static int coroutine_fn
bdrv_co_readv_em(BlockDriverState
*bs
,
4064 int64_t sector_num
, int nb_sectors
,
4067 return bdrv_co_io_em(bs
, sector_num
, nb_sectors
, iov
, false);
4070 static int coroutine_fn
bdrv_co_writev_em(BlockDriverState
*bs
,
4071 int64_t sector_num
, int nb_sectors
,
4074 return bdrv_co_io_em(bs
, sector_num
, nb_sectors
, iov
, true);
4077 static void coroutine_fn
bdrv_flush_co_entry(void *opaque
)
4079 RwCo
*rwco
= opaque
;
4081 rwco
->ret
= bdrv_co_flush(rwco
->bs
);
4084 int coroutine_fn
bdrv_co_flush(BlockDriverState
*bs
)
4088 if (!bs
|| !bdrv_is_inserted(bs
) || bdrv_is_read_only(bs
)) {
4092 /* Write back cached data to the OS even with cache=unsafe */
4093 if (bs
->drv
->bdrv_co_flush_to_os
) {
4094 ret
= bs
->drv
->bdrv_co_flush_to_os(bs
);
4100 /* But don't actually force it to the disk with cache=unsafe */
4101 if (bs
->open_flags
& BDRV_O_NO_FLUSH
) {
4105 if (bs
->drv
->bdrv_co_flush_to_disk
) {
4106 ret
= bs
->drv
->bdrv_co_flush_to_disk(bs
);
4107 } else if (bs
->drv
->bdrv_aio_flush
) {
4108 BlockDriverAIOCB
*acb
;
4109 CoroutineIOCompletion co
= {
4110 .coroutine
= qemu_coroutine_self(),
4113 acb
= bs
->drv
->bdrv_aio_flush(bs
, bdrv_co_io_em_complete
, &co
);
4117 qemu_coroutine_yield();
4122 * Some block drivers always operate in either writethrough or unsafe
4123 * mode and don't support bdrv_flush therefore. Usually qemu doesn't
4124 * know how the server works (because the behaviour is hardcoded or
4125 * depends on server-side configuration), so we can't ensure that
4126 * everything is safe on disk. Returning an error doesn't work because
4127 * that would break guests even if the server operates in writethrough
4130 * Let's hope the user knows what he's doing.
4138 /* Now flush the underlying protocol. It will also have BDRV_O_NO_FLUSH
4139 * in the case of cache=unsafe, so there are no useless flushes.
4142 return bdrv_co_flush(bs
->file
);
4145 void bdrv_invalidate_cache(BlockDriverState
*bs
)
4147 if (bs
->drv
&& bs
->drv
->bdrv_invalidate_cache
) {
4148 bs
->drv
->bdrv_invalidate_cache(bs
);
4152 void bdrv_invalidate_cache_all(void)
4154 BlockDriverState
*bs
;
4156 QTAILQ_FOREACH(bs
, &bdrv_states
, list
) {
4157 bdrv_invalidate_cache(bs
);
4161 void bdrv_clear_incoming_migration_all(void)
4163 BlockDriverState
*bs
;
4165 QTAILQ_FOREACH(bs
, &bdrv_states
, list
) {
4166 bs
->open_flags
= bs
->open_flags
& ~(BDRV_O_INCOMING
);
4170 int bdrv_flush(BlockDriverState
*bs
)
4178 if (qemu_in_coroutine()) {
4179 /* Fast-path if already in coroutine context */
4180 bdrv_flush_co_entry(&rwco
);
4182 co
= qemu_coroutine_create(bdrv_flush_co_entry
);
4183 qemu_coroutine_enter(co
, &rwco
);
4184 while (rwco
.ret
== NOT_DONE
) {
4192 static void coroutine_fn
bdrv_discard_co_entry(void *opaque
)
4194 RwCo
*rwco
= opaque
;
4196 rwco
->ret
= bdrv_co_discard(rwco
->bs
, rwco
->sector_num
, rwco
->nb_sectors
);
4199 int coroutine_fn
bdrv_co_discard(BlockDriverState
*bs
, int64_t sector_num
,
4204 } else if (bdrv_check_request(bs
, sector_num
, nb_sectors
)) {
4206 } else if (bs
->read_only
) {
4210 if (bs
->dirty_bitmap
) {
4211 bdrv_reset_dirty(bs
, sector_num
, nb_sectors
);
4214 /* Do nothing if disabled. */
4215 if (!(bs
->open_flags
& BDRV_O_UNMAP
)) {
4219 if (bs
->drv
->bdrv_co_discard
) {
4220 return bs
->drv
->bdrv_co_discard(bs
, sector_num
, nb_sectors
);
4221 } else if (bs
->drv
->bdrv_aio_discard
) {
4222 BlockDriverAIOCB
*acb
;
4223 CoroutineIOCompletion co
= {
4224 .coroutine
= qemu_coroutine_self(),
4227 acb
= bs
->drv
->bdrv_aio_discard(bs
, sector_num
, nb_sectors
,
4228 bdrv_co_io_em_complete
, &co
);
4232 qemu_coroutine_yield();
4240 int bdrv_discard(BlockDriverState
*bs
, int64_t sector_num
, int nb_sectors
)
4245 .sector_num
= sector_num
,
4246 .nb_sectors
= nb_sectors
,
4250 if (qemu_in_coroutine()) {
4251 /* Fast-path if already in coroutine context */
4252 bdrv_discard_co_entry(&rwco
);
4254 co
= qemu_coroutine_create(bdrv_discard_co_entry
);
4255 qemu_coroutine_enter(co
, &rwco
);
4256 while (rwco
.ret
== NOT_DONE
) {
4264 /**************************************************************/
4265 /* removable device support */
4268 * Return TRUE if the media is present
4270 int bdrv_is_inserted(BlockDriverState
*bs
)
4272 BlockDriver
*drv
= bs
->drv
;
4276 if (!drv
->bdrv_is_inserted
)
4278 return drv
->bdrv_is_inserted(bs
);
4282 * Return whether the media changed since the last call to this
4283 * function, or -ENOTSUP if we don't know. Most drivers don't know.
4285 int bdrv_media_changed(BlockDriverState
*bs
)
4287 BlockDriver
*drv
= bs
->drv
;
4289 if (drv
&& drv
->bdrv_media_changed
) {
4290 return drv
->bdrv_media_changed(bs
);
4296 * If eject_flag is TRUE, eject the media. Otherwise, close the tray
4298 void bdrv_eject(BlockDriverState
*bs
, bool eject_flag
)
4300 BlockDriver
*drv
= bs
->drv
;
4302 if (drv
&& drv
->bdrv_eject
) {
4303 drv
->bdrv_eject(bs
, eject_flag
);
4306 if (bs
->device_name
[0] != '\0') {
4307 bdrv_emit_qmp_eject_event(bs
, eject_flag
);
4312 * Lock or unlock the media (if it is locked, the user won't be able
4313 * to eject it manually).
4315 void bdrv_lock_medium(BlockDriverState
*bs
, bool locked
)
4317 BlockDriver
*drv
= bs
->drv
;
4319 trace_bdrv_lock_medium(bs
, locked
);
4321 if (drv
&& drv
->bdrv_lock_medium
) {
4322 drv
->bdrv_lock_medium(bs
, locked
);
4326 /* needed for generic scsi interface */
4328 int bdrv_ioctl(BlockDriverState
*bs
, unsigned long int req
, void *buf
)
4330 BlockDriver
*drv
= bs
->drv
;
4332 if (drv
&& drv
->bdrv_ioctl
)
4333 return drv
->bdrv_ioctl(bs
, req
, buf
);
4337 BlockDriverAIOCB
*bdrv_aio_ioctl(BlockDriverState
*bs
,
4338 unsigned long int req
, void *buf
,
4339 BlockDriverCompletionFunc
*cb
, void *opaque
)
4341 BlockDriver
*drv
= bs
->drv
;
4343 if (drv
&& drv
->bdrv_aio_ioctl
)
4344 return drv
->bdrv_aio_ioctl(bs
, req
, buf
, cb
, opaque
);
4348 void bdrv_set_buffer_alignment(BlockDriverState
*bs
, int align
)
4350 bs
->buffer_alignment
= align
;
4353 void *qemu_blockalign(BlockDriverState
*bs
, size_t size
)
4355 return qemu_memalign((bs
&& bs
->buffer_alignment
) ? bs
->buffer_alignment
: 512, size
);
4359 * Check if all memory in this vector is sector aligned.
4361 bool bdrv_qiov_is_aligned(BlockDriverState
*bs
, QEMUIOVector
*qiov
)
4365 for (i
= 0; i
< qiov
->niov
; i
++) {
4366 if ((uintptr_t) qiov
->iov
[i
].iov_base
% bs
->buffer_alignment
) {
4374 void bdrv_set_dirty_tracking(BlockDriverState
*bs
, int granularity
)
4376 int64_t bitmap_size
;
4378 assert((granularity
& (granularity
- 1)) == 0);
4381 granularity
>>= BDRV_SECTOR_BITS
;
4382 assert(!bs
->dirty_bitmap
);
4383 bitmap_size
= (bdrv_getlength(bs
) >> BDRV_SECTOR_BITS
);
4384 bs
->dirty_bitmap
= hbitmap_alloc(bitmap_size
, ffs(granularity
) - 1);
4386 if (bs
->dirty_bitmap
) {
4387 hbitmap_free(bs
->dirty_bitmap
);
4388 bs
->dirty_bitmap
= NULL
;
4393 int bdrv_get_dirty(BlockDriverState
*bs
, int64_t sector
)
4395 if (bs
->dirty_bitmap
) {
4396 return hbitmap_get(bs
->dirty_bitmap
, sector
);
4402 void bdrv_dirty_iter_init(BlockDriverState
*bs
, HBitmapIter
*hbi
)
4404 hbitmap_iter_init(hbi
, bs
->dirty_bitmap
, 0);
4407 void bdrv_set_dirty(BlockDriverState
*bs
, int64_t cur_sector
,
4410 hbitmap_set(bs
->dirty_bitmap
, cur_sector
, nr_sectors
);
4413 void bdrv_reset_dirty(BlockDriverState
*bs
, int64_t cur_sector
,
4416 hbitmap_reset(bs
->dirty_bitmap
, cur_sector
, nr_sectors
);
4419 int64_t bdrv_get_dirty_count(BlockDriverState
*bs
)
4421 if (bs
->dirty_bitmap
) {
4422 return hbitmap_count(bs
->dirty_bitmap
);
4428 void bdrv_set_in_use(BlockDriverState
*bs
, int in_use
)
4430 assert(bs
->in_use
!= in_use
);
4431 bs
->in_use
= in_use
;
4434 int bdrv_in_use(BlockDriverState
*bs
)
4439 void bdrv_iostatus_enable(BlockDriverState
*bs
)
4441 bs
->iostatus_enabled
= true;
4442 bs
->iostatus
= BLOCK_DEVICE_IO_STATUS_OK
;
4445 /* The I/O status is only enabled if the drive explicitly
4446 * enables it _and_ the VM is configured to stop on errors */
4447 bool bdrv_iostatus_is_enabled(const BlockDriverState
*bs
)
4449 return (bs
->iostatus_enabled
&&
4450 (bs
->on_write_error
== BLOCKDEV_ON_ERROR_ENOSPC
||
4451 bs
->on_write_error
== BLOCKDEV_ON_ERROR_STOP
||
4452 bs
->on_read_error
== BLOCKDEV_ON_ERROR_STOP
));
4455 void bdrv_iostatus_disable(BlockDriverState
*bs
)
4457 bs
->iostatus_enabled
= false;
4460 void bdrv_iostatus_reset(BlockDriverState
*bs
)
4462 if (bdrv_iostatus_is_enabled(bs
)) {
4463 bs
->iostatus
= BLOCK_DEVICE_IO_STATUS_OK
;
4465 block_job_iostatus_reset(bs
->job
);
4470 void bdrv_iostatus_set_err(BlockDriverState
*bs
, int error
)
4472 assert(bdrv_iostatus_is_enabled(bs
));
4473 if (bs
->iostatus
== BLOCK_DEVICE_IO_STATUS_OK
) {
4474 bs
->iostatus
= error
== ENOSPC
? BLOCK_DEVICE_IO_STATUS_NOSPACE
:
4475 BLOCK_DEVICE_IO_STATUS_FAILED
;
4480 bdrv_acct_start(BlockDriverState
*bs
, BlockAcctCookie
*cookie
, int64_t bytes
,
4481 enum BlockAcctType type
)
4483 assert(type
< BDRV_MAX_IOTYPE
);
4485 cookie
->bytes
= bytes
;
4486 cookie
->start_time_ns
= get_clock();
4487 cookie
->type
= type
;
4491 bdrv_acct_done(BlockDriverState
*bs
, BlockAcctCookie
*cookie
)
4493 assert(cookie
->type
< BDRV_MAX_IOTYPE
);
4495 bs
->nr_bytes
[cookie
->type
] += cookie
->bytes
;
4496 bs
->nr_ops
[cookie
->type
]++;
4497 bs
->total_time_ns
[cookie
->type
] += get_clock() - cookie
->start_time_ns
;
4500 void bdrv_img_create(const char *filename
, const char *fmt
,
4501 const char *base_filename
, const char *base_fmt
,
4502 char *options
, uint64_t img_size
, int flags
,
4503 Error
**errp
, bool quiet
)
4505 QEMUOptionParameter
*param
= NULL
, *create_options
= NULL
;
4506 QEMUOptionParameter
*backing_fmt
, *backing_file
, *size
;
4507 BlockDriverState
*bs
= NULL
;
4508 BlockDriver
*drv
, *proto_drv
;
4509 BlockDriver
*backing_drv
= NULL
;
4512 /* Find driver and parse its options */
4513 drv
= bdrv_find_format(fmt
);
4515 error_setg(errp
, "Unknown file format '%s'", fmt
);
4519 proto_drv
= bdrv_find_protocol(filename
);
4521 error_setg(errp
, "Unknown protocol '%s'", filename
);
4525 create_options
= append_option_parameters(create_options
,
4526 drv
->create_options
);
4527 create_options
= append_option_parameters(create_options
,
4528 proto_drv
->create_options
);
4530 /* Create parameter list with default values */
4531 param
= parse_option_parameters("", create_options
, param
);
4533 set_option_parameter_int(param
, BLOCK_OPT_SIZE
, img_size
);
4535 /* Parse -o options */
4537 param
= parse_option_parameters(options
, create_options
, param
);
4538 if (param
== NULL
) {
4539 error_setg(errp
, "Invalid options for file format '%s'.", fmt
);
4544 if (base_filename
) {
4545 if (set_option_parameter(param
, BLOCK_OPT_BACKING_FILE
,
4547 error_setg(errp
, "Backing file not supported for file format '%s'",
4554 if (set_option_parameter(param
, BLOCK_OPT_BACKING_FMT
, base_fmt
)) {
4555 error_setg(errp
, "Backing file format not supported for file "
4556 "format '%s'", fmt
);
4561 backing_file
= get_option_parameter(param
, BLOCK_OPT_BACKING_FILE
);
4562 if (backing_file
&& backing_file
->value
.s
) {
4563 if (!strcmp(filename
, backing_file
->value
.s
)) {
4564 error_setg(errp
, "Error: Trying to create an image with the "
4565 "same filename as the backing file");
4570 backing_fmt
= get_option_parameter(param
, BLOCK_OPT_BACKING_FMT
);
4571 if (backing_fmt
&& backing_fmt
->value
.s
) {
4572 backing_drv
= bdrv_find_format(backing_fmt
->value
.s
);
4574 error_setg(errp
, "Unknown backing file format '%s'",
4575 backing_fmt
->value
.s
);
4580 // The size for the image must always be specified, with one exception:
4581 // If we are using a backing file, we can obtain the size from there
4582 size
= get_option_parameter(param
, BLOCK_OPT_SIZE
);
4583 if (size
&& size
->value
.n
== -1) {
4584 if (backing_file
&& backing_file
->value
.s
) {
4589 /* backing files always opened read-only */
4591 flags
& ~(BDRV_O_RDWR
| BDRV_O_SNAPSHOT
| BDRV_O_NO_BACKING
);
4595 ret
= bdrv_open(bs
, backing_file
->value
.s
, back_flags
, backing_drv
);
4597 error_setg_errno(errp
, -ret
, "Could not open '%s'",
4598 backing_file
->value
.s
);
4601 bdrv_get_geometry(bs
, &size
);
4604 snprintf(buf
, sizeof(buf
), "%" PRId64
, size
);
4605 set_option_parameter(param
, BLOCK_OPT_SIZE
, buf
);
4607 error_setg(errp
, "Image creation needs a size parameter");
4613 printf("Formatting '%s', fmt=%s ", filename
, fmt
);
4614 print_option_parameters(param
);
4617 ret
= bdrv_create(drv
, filename
, param
);
4619 if (ret
== -ENOTSUP
) {
4620 error_setg(errp
,"Formatting or formatting option not supported for "
4621 "file format '%s'", fmt
);
4622 } else if (ret
== -EFBIG
) {
4623 error_setg(errp
, "The image size is too large for file format '%s'",
4626 error_setg(errp
, "%s: error while creating %s: %s", filename
, fmt
,
4632 free_option_parameters(create_options
);
4633 free_option_parameters(param
);