hw/pl190.c

   1 /*
   2  * Arm PrimeCell PL190 Vector Interrupt Controller
   3  *
   4  * Copyright (c) 2006 CodeSourcery.
   5  * Written by Paul Brook
   6  *
   7  * This code is licensed under the GPL.
   8  */
   9
  10 #include "sysbus.h"
  11
  12 /* The number of virtual priority levels.  16 user vectors plus the
  13    unvectored IRQ.  Chained interrupts would require an additional level
  14    if implemented.  */
  15
  16 #define PL190_NUM_PRIO 17
  17
  18 typedef struct {
  19     SysBusDevice busdev;
  20     MemoryRegion iomem;
  21     uint32_t level;
  22     uint32_t soft_level;
  23     uint32_t irq_enable;
  24     uint32_t fiq_select;
  25     uint8_t vect_control[16];
  26     uint32_t vect_addr[PL190_NUM_PRIO];
  27     /* Mask containing interrupts with higher priority than this one.  */
  28     uint32_t prio_mask[PL190_NUM_PRIO + 1];
  29     int protected;
  30     /* Current priority level.  */
  31     int priority;
  32     int prev_prio[PL190_NUM_PRIO];
  33     qemu_irq irq;
  34     qemu_irq fiq;
  35 } pl190_state;
  36
  37 static const unsigned char pl190_id[] =
  38 { 0x90, 0x11, 0x04, 0x00, 0x0D, 0xf0, 0x05, 0xb1 };
  39
  40 static inline uint32_t pl190_irq_level(pl190_state *s)
  41 {
  42     return (s->level | s->soft_level) & s->irq_enable & ~s->fiq_select;
  43 }
  44
  45 /* Update interrupts.  */
  46 static void pl190_update(pl190_state *s)
  47 {
  48     uint32_t level = pl190_irq_level(s);
  49     int set;
  50
  51     set = (level & s->prio_mask[s->priority]) != 0;
  52     qemu_set_irq(s->irq, set);
  53     set = ((s->level | s->soft_level) & s->fiq_select) != 0;
  54     qemu_set_irq(s->fiq, set);
  55 }
  56
  57 static void pl190_set_irq(void *opaque, int irq, int level)
  58 {
  59     pl190_state *s = (pl190_state *)opaque;
  60
  61     if (level)
  62         s->level |= 1u << irq;
  63     else
  64         s->level &= ~(1u << irq);
  65     pl190_update(s);
  66 }
  67
  68 static void pl190_update_vectors(pl190_state *s)
  69 {
  70     uint32_t mask;
  71     int i;
  72     int n;
  73
  74     mask = 0;
  75     for (i = 0; i < 16; i++)
  76       {
  77         s->prio_mask[i] = mask;
  78         if (s->vect_control[i] & 0x20)
  79           {
  80             n = s->vect_control[i] & 0x1f;
  81             mask |= 1 << n;
  82           }
  83       }
  84     s->prio_mask[16] = mask;
  85     pl190_update(s);
  86 }
  87
  88 static uint64_t pl190_read(void *opaque, target_phys_addr_t offset,
  89                            unsigned size)
  90 {
  91     pl190_state *s = (pl190_state *)opaque;
  92     int i;
  93
  94     if (offset >= 0xfe0 && offset < 0x1000) {
  95         return pl190_id[(offset - 0xfe0) >> 2];
  96     }
  97     if (offset >= 0x100 && offset < 0x140) {
  98         return s->vect_addr[(offset - 0x100) >> 2];
  99     }
 100     if (offset >= 0x200 && offset < 0x240) {
 101         return s->vect_control[(offset - 0x200) >> 2];
 102     }
 103     switch (offset >> 2) {
 104     case 0: /* IRQSTATUS */
 105         return pl190_irq_level(s);
 106     case 1: /* FIQSATUS */
 107         return (s->level | s->soft_level) & s->fiq_select;
 108     case 2: /* RAWINTR */
 109         return s->level | s->soft_level;
 110     case 3: /* INTSELECT */
 111         return s->fiq_select;
 112     case 4: /* INTENABLE */
 113         return s->irq_enable;
 114     case 6: /* SOFTINT */
 115         return s->soft_level;
 116     case 8: /* PROTECTION */
 117         return s->protected;
 118     case 12: /* VECTADDR */
 119         /* Read vector address at the start of an ISR.  Increases the
 120            current priority level to that of the current interrupt.  */
 121         for (i = 0; i < s->priority; i++)
 122           {
 123             if ((s->level | s->soft_level) & s->prio_mask[i])
 124               break;
 125           }
 126         /* Reading this value with no pending interrupts is undefined.
 127            We return the default address.  */
 128         if (i == PL190_NUM_PRIO)
 129           return s->vect_addr[16];
 130         if (i < s->priority)
 131           {
 132             s->prev_prio[i] = s->priority;
 133             s->priority = i;
 134             pl190_update(s);
 135           }
 136         return s->vect_addr[s->priority];
 137     case 13: /* DEFVECTADDR */
 138         return s->vect_addr[16];
 139     default:
 140         hw_error("pl190_read: Bad offset %x\n", (int)offset);
 141         return 0;
 142     }
 143 }
 144
 145 static void pl190_write(void *opaque, target_phys_addr_t offset,
 146                         uint64_t val, unsigned size)
 147 {
 148     pl190_state *s = (pl190_state *)opaque;
 149
 150     if (offset >= 0x100 && offset < 0x140) {
 151         s->vect_addr[(offset - 0x100) >> 2] = val;
 152         pl190_update_vectors(s);
 153         return;
 154     }
 155     if (offset >= 0x200 && offset < 0x240) {
 156         s->vect_control[(offset - 0x200) >> 2] = val;
 157         pl190_update_vectors(s);
 158         return;
 159     }
 160     switch (offset >> 2) {
 161     case 0: /* SELECT */
 162         /* This is a readonly register, but linux tries to write to it
 163            anyway.  Ignore the write.  */
 164         break;
 165     case 3: /* INTSELECT */
 166         s->fiq_select = val;
 167         break;
 168     case 4: /* INTENABLE */
 169         s->irq_enable |= val;
 170         break;
 171     case 5: /* INTENCLEAR */
 172         s->irq_enable &= ~val;
 173         break;
 174     case 6: /* SOFTINT */
 175         s->soft_level |= val;
 176         break;
 177     case 7: /* SOFTINTCLEAR */
 178         s->soft_level &= ~val;
 179         break;
 180     case 8: /* PROTECTION */
 181         /* TODO: Protection (supervisor only access) is not implemented.  */
 182         s->protected = val & 1;
 183         break;
 184     case 12: /* VECTADDR */
 185         /* Restore the previous priority level.  The value written is
 186            ignored.  */
 187         if (s->priority < PL190_NUM_PRIO)
 188             s->priority = s->prev_prio[s->priority];
 189         break;
 190     case 13: /* DEFVECTADDR */
 191         s->vect_addr[16] = val;
 192         break;
 193     case 0xc0: /* ITCR */
 194         if (val) {
 195             hw_error("pl190: Test mode not implemented\n");
 196         }
 197         break;
 198     default:
 199         hw_error("pl190_write: Bad offset %x\n", (int)offset);
 200         return;
 201     }
 202     pl190_update(s);
 203 }
 204
 205 static const MemoryRegionOps pl190_ops = {
 206     .read = pl190_read,
 207     .write = pl190_write,
 208     .endianness = DEVICE_NATIVE_ENDIAN,
 209 };
 210
 211 static void pl190_reset(DeviceState *d)
 212 {
 213   pl190_state *s = DO_UPCAST(pl190_state, busdev.qdev, d);
 214   int i;
 215
 216   for (i = 0; i < 16; i++)
 217     {
 218       s->vect_addr[i] = 0;
 219       s->vect_control[i] = 0;
 220     }
 221   s->vect_addr[16] = 0;
 222   s->prio_mask[17] = 0xffffffff;
 223   s->priority = PL190_NUM_PRIO;
 224   pl190_update_vectors(s);
 225 }
 226
 227 static int pl190_init(SysBusDevice *dev)
 228 {
 229     pl190_state *s = FROM_SYSBUS(pl190_state, dev);
 230
 231     memory_region_init_io(&s->iomem, &pl190_ops, s, "pl190", 0x1000);
 232     sysbus_init_mmio(dev, &s->iomem);
 233     qdev_init_gpio_in(&dev->qdev, pl190_set_irq, 32);
 234     sysbus_init_irq(dev, &s->irq);
 235     sysbus_init_irq(dev, &s->fiq);
 236     return 0;
 237 }
 238
 239 static const VMStateDescription vmstate_pl190 = {
 240     .name = "pl190",
 241     .version_id = 1,
 242     .minimum_version_id = 1,
 243     .fields = (VMStateField[]) {
 244         VMSTATE_UINT32(level, pl190_state),
 245         VMSTATE_UINT32(soft_level, pl190_state),
 246         VMSTATE_UINT32(irq_enable, pl190_state),
 247         VMSTATE_UINT32(fiq_select, pl190_state),
 248         VMSTATE_UINT8_ARRAY(vect_control, pl190_state, 16),
 249         VMSTATE_UINT32_ARRAY(vect_addr, pl190_state, PL190_NUM_PRIO),
 250         VMSTATE_UINT32_ARRAY(prio_mask, pl190_state, PL190_NUM_PRIO+1),
 251         VMSTATE_INT32(protected, pl190_state),
 252         VMSTATE_INT32(priority, pl190_state),
 253         VMSTATE_INT32_ARRAY(prev_prio, pl190_state, PL190_NUM_PRIO),
 254         VMSTATE_END_OF_LIST()
 255     }
 256 };
 257
 258 static SysBusDeviceInfo pl190_info = {
 259     .init = pl190_init,
 260     .qdev.name = "pl190",
 261     .qdev.size = sizeof(pl190_state),
 262     .qdev.vmsd = &vmstate_pl190,
 263     .qdev.reset = pl190_reset,
 264     .qdev.no_user = 1,
 265 };
 266
 267 static void pl190_register_devices(void)
 268 {
 269     sysbus_register_withprop(&pl190_info);
 270 }
 271
 272 device_init(pl190_register_devices)