Revert "gdbstub: Do not kill target in system emulation mode"
[qemu/qmp-unstable.git] / hw / intc / puv3_intc.c
blobc2803d07d53c70272acafa4137f1053c39ed9ffa
1 /*
2 * INTC device simulation in PKUnity SoC
4 * Copyright (C) 2010-2012 Guan Xuetao
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation, or any later version.
9 * See the COPYING file in the top-level directory.
11 #include "hw/sysbus.h"
13 #undef DEBUG_PUV3
14 #include "hw/unicore32/puv3.h"
16 #define TYPE_PUV3_INTC "puv3_intc"
17 #define PUV3_INTC(obj) OBJECT_CHECK(PUV3INTCState, (obj), TYPE_PUV3_INTC)
19 typedef struct PUV3INTCState {
20 SysBusDevice parent_obj;
22 MemoryRegion iomem;
23 qemu_irq parent_irq;
25 uint32_t reg_ICMR;
26 uint32_t reg_ICPR;
27 } PUV3INTCState;
29 /* Update interrupt status after enabled or pending bits have been changed. */
30 static void puv3_intc_update(PUV3INTCState *s)
32 if (s->reg_ICMR & s->reg_ICPR) {
33 qemu_irq_raise(s->parent_irq);
34 } else {
35 qemu_irq_lower(s->parent_irq);
39 /* Process a change in an external INTC input. */
40 static void puv3_intc_handler(void *opaque, int irq, int level)
42 PUV3INTCState *s = opaque;
44 DPRINTF("irq 0x%x, level 0x%x\n", irq, level);
45 if (level) {
46 s->reg_ICPR |= (1 << irq);
47 } else {
48 s->reg_ICPR &= ~(1 << irq);
50 puv3_intc_update(s);
53 static uint64_t puv3_intc_read(void *opaque, hwaddr offset,
54 unsigned size)
56 PUV3INTCState *s = opaque;
57 uint32_t ret = 0;
59 switch (offset) {
60 case 0x04: /* INTC_ICMR */
61 ret = s->reg_ICMR;
62 break;
63 case 0x0c: /* INTC_ICIP */
64 ret = s->reg_ICPR; /* the same value with ICPR */
65 break;
66 default:
67 DPRINTF("Bad offset %x\n", (int)offset);
69 DPRINTF("offset 0x%x, value 0x%x\n", offset, ret);
70 return ret;
73 static void puv3_intc_write(void *opaque, hwaddr offset,
74 uint64_t value, unsigned size)
76 PUV3INTCState *s = opaque;
78 DPRINTF("offset 0x%x, value 0x%x\n", offset, value);
79 switch (offset) {
80 case 0x00: /* INTC_ICLR */
81 case 0x14: /* INTC_ICCR */
82 break;
83 case 0x04: /* INTC_ICMR */
84 s->reg_ICMR = value;
85 break;
86 default:
87 DPRINTF("Bad offset 0x%x\n", (int)offset);
88 return;
90 puv3_intc_update(s);
93 static const MemoryRegionOps puv3_intc_ops = {
94 .read = puv3_intc_read,
95 .write = puv3_intc_write,
96 .impl = {
97 .min_access_size = 4,
98 .max_access_size = 4,
100 .endianness = DEVICE_NATIVE_ENDIAN,
103 static int puv3_intc_init(SysBusDevice *sbd)
105 DeviceState *dev = DEVICE(sbd);
106 PUV3INTCState *s = PUV3_INTC(dev);
108 qdev_init_gpio_in(dev, puv3_intc_handler, PUV3_IRQS_NR);
109 sysbus_init_irq(sbd, &s->parent_irq);
111 s->reg_ICMR = 0;
112 s->reg_ICPR = 0;
114 memory_region_init_io(&s->iomem, OBJECT(s), &puv3_intc_ops, s, "puv3_intc",
115 PUV3_REGS_OFFSET);
116 sysbus_init_mmio(sbd, &s->iomem);
118 return 0;
121 static void puv3_intc_class_init(ObjectClass *klass, void *data)
123 SysBusDeviceClass *sdc = SYS_BUS_DEVICE_CLASS(klass);
125 sdc->init = puv3_intc_init;
128 static const TypeInfo puv3_intc_info = {
129 .name = TYPE_PUV3_INTC,
130 .parent = TYPE_SYS_BUS_DEVICE,
131 .instance_size = sizeof(PUV3INTCState),
132 .class_init = puv3_intc_class_init,
135 static void puv3_intc_register_type(void)
137 type_register_static(&puv3_intc_info);
140 type_init(puv3_intc_register_type)