sh4/r2d: update pci, usb and kernel management
[qemu/sh4.git] / hw / pxa2xx_gpio.c
blob0f3dcb101a1949b1ab4cf4f31e3860858dcc1c7d
1 /*
2 * Intel XScale PXA255/270 GPIO controller emulation.
4 * Copyright (c) 2006 Openedhand Ltd.
5 * Written by Andrzej Zaborowski <balrog@zabor.org>
7 * This code is licensed under the GPL.
8 */
10 #include "hw.h"
11 #include "pxa.h"
13 #define PXA2XX_GPIO_BANKS 4
15 struct pxa2xx_gpio_info_s {
16 qemu_irq *pic;
17 int lines;
18 CPUState *cpu_env;
19 qemu_irq *in;
21 /* XXX: GNU C vectors are more suitable */
22 uint32_t ilevel[PXA2XX_GPIO_BANKS];
23 uint32_t olevel[PXA2XX_GPIO_BANKS];
24 uint32_t dir[PXA2XX_GPIO_BANKS];
25 uint32_t rising[PXA2XX_GPIO_BANKS];
26 uint32_t falling[PXA2XX_GPIO_BANKS];
27 uint32_t status[PXA2XX_GPIO_BANKS];
28 uint32_t gpsr[PXA2XX_GPIO_BANKS];
29 uint32_t gafr[PXA2XX_GPIO_BANKS * 2];
31 uint32_t prev_level[PXA2XX_GPIO_BANKS];
32 qemu_irq handler[PXA2XX_GPIO_BANKS * 32];
33 qemu_irq read_notify;
36 static struct {
37 enum {
38 GPIO_NONE,
39 GPLR,
40 GPSR,
41 GPCR,
42 GPDR,
43 GRER,
44 GFER,
45 GEDR,
46 GAFR_L,
47 GAFR_U,
48 } reg;
49 int bank;
50 } pxa2xx_gpio_regs[0x200] = {
51 [0 ... 0x1ff] = { GPIO_NONE, 0 },
52 #define PXA2XX_REG(reg, a0, a1, a2, a3) \
53 [a0] = { reg, 0 }, [a1] = { reg, 1 }, [a2] = { reg, 2 }, [a3] = { reg, 3 },
55 PXA2XX_REG(GPLR, 0x000, 0x004, 0x008, 0x100)
56 PXA2XX_REG(GPSR, 0x018, 0x01c, 0x020, 0x118)
57 PXA2XX_REG(GPCR, 0x024, 0x028, 0x02c, 0x124)
58 PXA2XX_REG(GPDR, 0x00c, 0x010, 0x014, 0x10c)
59 PXA2XX_REG(GRER, 0x030, 0x034, 0x038, 0x130)
60 PXA2XX_REG(GFER, 0x03c, 0x040, 0x044, 0x13c)
61 PXA2XX_REG(GEDR, 0x048, 0x04c, 0x050, 0x148)
62 PXA2XX_REG(GAFR_L, 0x054, 0x05c, 0x064, 0x06c)
63 PXA2XX_REG(GAFR_U, 0x058, 0x060, 0x068, 0x070)
66 static void pxa2xx_gpio_irq_update(struct pxa2xx_gpio_info_s *s)
68 if (s->status[0] & (1 << 0))
69 qemu_irq_raise(s->pic[PXA2XX_PIC_GPIO_0]);
70 else
71 qemu_irq_lower(s->pic[PXA2XX_PIC_GPIO_0]);
73 if (s->status[0] & (1 << 1))
74 qemu_irq_raise(s->pic[PXA2XX_PIC_GPIO_1]);
75 else
76 qemu_irq_lower(s->pic[PXA2XX_PIC_GPIO_1]);
78 if ((s->status[0] & ~3) | s->status[1] | s->status[2] | s->status[3])
79 qemu_irq_raise(s->pic[PXA2XX_PIC_GPIO_X]);
80 else
81 qemu_irq_lower(s->pic[PXA2XX_PIC_GPIO_X]);
84 /* Bitmap of pins used as standby and sleep wake-up sources. */
85 static const int pxa2xx_gpio_wake[PXA2XX_GPIO_BANKS] = {
86 0x8003fe1b, 0x002001fc, 0xec080000, 0x0012007f,
89 static void pxa2xx_gpio_set(void *opaque, int line, int level)
91 struct pxa2xx_gpio_info_s *s = (struct pxa2xx_gpio_info_s *) opaque;
92 int bank;
93 uint32_t mask;
95 if (line >= s->lines) {
96 printf("%s: No GPIO pin %i\n", __FUNCTION__, line);
97 return;
100 bank = line >> 5;
101 mask = 1 << (line & 31);
103 if (level) {
104 s->status[bank] |= s->rising[bank] & mask &
105 ~s->ilevel[bank] & ~s->dir[bank];
106 s->ilevel[bank] |= mask;
107 } else {
108 s->status[bank] |= s->falling[bank] & mask &
109 s->ilevel[bank] & ~s->dir[bank];
110 s->ilevel[bank] &= ~mask;
113 if (s->status[bank] & mask)
114 pxa2xx_gpio_irq_update(s);
116 /* Wake-up GPIOs */
117 if (s->cpu_env->halted && (mask & ~s->dir[bank] & pxa2xx_gpio_wake[bank]))
118 cpu_interrupt(s->cpu_env, CPU_INTERRUPT_EXITTB);
121 static void pxa2xx_gpio_handler_update(struct pxa2xx_gpio_info_s *s) {
122 uint32_t level, diff;
123 int i, bit, line;
124 for (i = 0; i < PXA2XX_GPIO_BANKS; i ++) {
125 level = s->olevel[i] & s->dir[i];
127 for (diff = s->prev_level[i] ^ level; diff; diff ^= 1 << bit) {
128 bit = ffs(diff) - 1;
129 line = bit + 32 * i;
130 qemu_set_irq(s->handler[line], (level >> bit) & 1);
133 s->prev_level[i] = level;
137 static uint32_t pxa2xx_gpio_read(void *opaque, target_phys_addr_t offset)
139 struct pxa2xx_gpio_info_s *s = (struct pxa2xx_gpio_info_s *) opaque;
140 uint32_t ret;
141 int bank;
142 if (offset >= 0x200)
143 return 0;
145 bank = pxa2xx_gpio_regs[offset].bank;
146 switch (pxa2xx_gpio_regs[offset].reg) {
147 case GPDR: /* GPIO Pin-Direction registers */
148 return s->dir[bank];
150 case GPSR: /* GPIO Pin-Output Set registers */
151 printf("%s: Read from a write-only register " REG_FMT "\n",
152 __FUNCTION__, offset);
153 return s->gpsr[bank]; /* Return last written value. */
155 case GPCR: /* GPIO Pin-Output Clear registers */
156 printf("%s: Read from a write-only register " REG_FMT "\n",
157 __FUNCTION__, offset);
158 return 31337; /* Specified as unpredictable in the docs. */
160 case GRER: /* GPIO Rising-Edge Detect Enable registers */
161 return s->rising[bank];
163 case GFER: /* GPIO Falling-Edge Detect Enable registers */
164 return s->falling[bank];
166 case GAFR_L: /* GPIO Alternate Function registers */
167 return s->gafr[bank * 2];
169 case GAFR_U: /* GPIO Alternate Function registers */
170 return s->gafr[bank * 2 + 1];
172 case GPLR: /* GPIO Pin-Level registers */
173 ret = (s->olevel[bank] & s->dir[bank]) |
174 (s->ilevel[bank] & ~s->dir[bank]);
175 qemu_irq_raise(s->read_notify);
176 return ret;
178 case GEDR: /* GPIO Edge Detect Status registers */
179 return s->status[bank];
181 default:
182 cpu_abort(cpu_single_env,
183 "%s: Bad offset " REG_FMT "\n", __FUNCTION__, offset);
186 return 0;
189 static void pxa2xx_gpio_write(void *opaque,
190 target_phys_addr_t offset, uint32_t value)
192 struct pxa2xx_gpio_info_s *s = (struct pxa2xx_gpio_info_s *) opaque;
193 int bank;
194 if (offset >= 0x200)
195 return;
197 bank = pxa2xx_gpio_regs[offset].bank;
198 switch (pxa2xx_gpio_regs[offset].reg) {
199 case GPDR: /* GPIO Pin-Direction registers */
200 s->dir[bank] = value;
201 pxa2xx_gpio_handler_update(s);
202 break;
204 case GPSR: /* GPIO Pin-Output Set registers */
205 s->olevel[bank] |= value;
206 pxa2xx_gpio_handler_update(s);
207 s->gpsr[bank] = value;
208 break;
210 case GPCR: /* GPIO Pin-Output Clear registers */
211 s->olevel[bank] &= ~value;
212 pxa2xx_gpio_handler_update(s);
213 break;
215 case GRER: /* GPIO Rising-Edge Detect Enable registers */
216 s->rising[bank] = value;
217 break;
219 case GFER: /* GPIO Falling-Edge Detect Enable registers */
220 s->falling[bank] = value;
221 break;
223 case GAFR_L: /* GPIO Alternate Function registers */
224 s->gafr[bank * 2] = value;
225 break;
227 case GAFR_U: /* GPIO Alternate Function registers */
228 s->gafr[bank * 2 + 1] = value;
229 break;
231 case GEDR: /* GPIO Edge Detect Status registers */
232 s->status[bank] &= ~value;
233 pxa2xx_gpio_irq_update(s);
234 break;
236 default:
237 cpu_abort(cpu_single_env,
238 "%s: Bad offset " REG_FMT "\n", __FUNCTION__, offset);
242 static CPUReadMemoryFunc *pxa2xx_gpio_readfn[] = {
243 pxa2xx_gpio_read,
244 pxa2xx_gpio_read,
245 pxa2xx_gpio_read
248 static CPUWriteMemoryFunc *pxa2xx_gpio_writefn[] = {
249 pxa2xx_gpio_write,
250 pxa2xx_gpio_write,
251 pxa2xx_gpio_write
254 static void pxa2xx_gpio_save(QEMUFile *f, void *opaque)
256 struct pxa2xx_gpio_info_s *s = (struct pxa2xx_gpio_info_s *) opaque;
257 int i;
259 qemu_put_be32(f, s->lines);
261 for (i = 0; i < PXA2XX_GPIO_BANKS; i ++) {
262 qemu_put_be32s(f, &s->ilevel[i]);
263 qemu_put_be32s(f, &s->olevel[i]);
264 qemu_put_be32s(f, &s->dir[i]);
265 qemu_put_be32s(f, &s->rising[i]);
266 qemu_put_be32s(f, &s->falling[i]);
267 qemu_put_be32s(f, &s->status[i]);
268 qemu_put_be32s(f, &s->gafr[i * 2 + 0]);
269 qemu_put_be32s(f, &s->gafr[i * 2 + 1]);
271 qemu_put_be32s(f, &s->prev_level[i]);
275 static int pxa2xx_gpio_load(QEMUFile *f, void *opaque, int version_id)
277 struct pxa2xx_gpio_info_s *s = (struct pxa2xx_gpio_info_s *) opaque;
278 int i;
280 if (qemu_get_be32(f) != s->lines)
281 return -EINVAL;
283 for (i = 0; i < PXA2XX_GPIO_BANKS; i ++) {
284 qemu_get_be32s(f, &s->ilevel[i]);
285 qemu_get_be32s(f, &s->olevel[i]);
286 qemu_get_be32s(f, &s->dir[i]);
287 qemu_get_be32s(f, &s->rising[i]);
288 qemu_get_be32s(f, &s->falling[i]);
289 qemu_get_be32s(f, &s->status[i]);
290 qemu_get_be32s(f, &s->gafr[i * 2 + 0]);
291 qemu_get_be32s(f, &s->gafr[i * 2 + 1]);
293 qemu_get_be32s(f, &s->prev_level[i]);
296 return 0;
299 struct pxa2xx_gpio_info_s *pxa2xx_gpio_init(target_phys_addr_t base,
300 CPUState *env, qemu_irq *pic, int lines)
302 int iomemtype;
303 struct pxa2xx_gpio_info_s *s;
305 s = (struct pxa2xx_gpio_info_s *)
306 qemu_mallocz(sizeof(struct pxa2xx_gpio_info_s));
307 memset(s, 0, sizeof(struct pxa2xx_gpio_info_s));
308 s->pic = pic;
309 s->lines = lines;
310 s->cpu_env = env;
311 s->in = qemu_allocate_irqs(pxa2xx_gpio_set, s, lines);
313 iomemtype = cpu_register_io_memory(0, pxa2xx_gpio_readfn,
314 pxa2xx_gpio_writefn, s);
315 cpu_register_physical_memory(base, 0x00001000, iomemtype);
317 register_savevm("pxa2xx_gpio", 0, 0,
318 pxa2xx_gpio_save, pxa2xx_gpio_load, s);
320 return s;
323 qemu_irq *pxa2xx_gpio_in_get(struct pxa2xx_gpio_info_s *s)
325 return s->in;
328 void pxa2xx_gpio_out_set(struct pxa2xx_gpio_info_s *s,
329 int line, qemu_irq handler)
331 if (line >= s->lines) {
332 printf("%s: No GPIO pin %i\n", __FUNCTION__, line);
333 return;
336 s->handler[line] = handler;
340 * Registers a callback to notify on GPLR reads. This normally
341 * shouldn't be needed but it is used for the hack on Spitz machines.
343 void pxa2xx_gpio_read_notifier(struct pxa2xx_gpio_info_s *s, qemu_irq handler)
345 s->read_notify = handler;