Makefile.in

   1 # Makefile for rsync. This is processed by configure to produce the final
   2 # Makefile
   3
   4 prefix=@prefix@
   5 datarootdir=@datarootdir@
   6 exec_prefix=@exec_prefix@
   7 bindir=@bindir@
   8 mandir=@mandir@
   9
  10 LIBS=@LIBS@
  11 CC=@CC@
  12 CFLAGS=@CFLAGS@
  13 CPPFLAGS=@CPPFLAGS@
  14 EXEEXT=@EXEEXT@
  15 LDFLAGS=@LDFLAGS@
  16
  17 INSTALLCMD=@INSTALL@
  18 INSTALLMAN=@INSTALL@
  19
  20 srcdir=@srcdir@
  21 VPATH=$(srcdir)
  22 SHELL=/bin/sh
  23
  24 VERSION=@VERSION@
  25
  26 .SUFFIXES:
  27 .SUFFIXES: .c .o
  28
  29 GENFILES=configure.sh config.h.in proto.h proto.h-tstamp rsync.1 rsyncd.conf.5
  30 HEADERS=byteorder.h config.h errcode.h proto.h rsync.h ifuncs.h lib/pool_alloc.h
  31 LIBOBJ=lib/wildmatch.o lib/compat.o lib/snprintf.o lib/mdfour.o lib/md5.o \
  32         lib/permstring.o lib/pool_alloc.o lib/sysacls.o lib/sysxattrs.o @LIBOBJS@
  33 ZLIBOBJ=zlib/deflate.o zlib/inffast.o zlib/inflate.o zlib/inftrees.o \
  34         zlib/trees.o zlib/zutil.o zlib/adler32.o zlib/compress.o zlib/crc32.o
  35 OBJS1=flist.o rsync.o generator.o receiver.o cleanup.o sender.o exclude.o \
  36         util.o main.o checksum.o match.o syscall.o log.o backup.o
  37 OBJS2=options.o io.o compat.o hlink.o token.o uidlist.o socket.o hashtable.o \
  38         fileio.o batch.o clientname.o chmod.o acls.o xattrs.o
  39 OBJS3=progress.o pipe.o
  40 DAEMON_OBJ = params.o loadparm.o clientserver.o access.o connection.o authenticate.o
  41 popt_OBJS=popt/findme.o  popt/popt.o  popt/poptconfig.o \
  42         popt/popthelp.o popt/poptparse.o
  43 OBJS=$(OBJS1) $(OBJS2) $(OBJS3) $(DAEMON_OBJ) $(LIBOBJ) $(ZLIBOBJ) @BUILD_POPT@
  44
  45 TLS_OBJ = tls.o syscall.o lib/compat.o lib/snprintf.o lib/permstring.o lib/sysxattrs.o @BUILD_POPT@
  46
  47 # Programs we must have to run the test cases
  48 CHECK_PROGS = rsync$(EXEEXT) tls$(EXEEXT) getgroups$(EXEEXT) getfsdev$(EXEEXT) \
  49         trimslash$(EXEEXT) t_unsafe$(EXEEXT) wildtest$(EXEEXT)
  50
  51 CHECK_SYMLINKS = testsuite/chown-fake.test testsuite/devices-fake.test
  52
  53 # Objects for CHECK_PROGS to clean
  54 CHECK_OBJS=tls.o getgroups.o getfsdev.o t_stub.o t_unsafe.o trimslash.o wildtest.o
  55
  56 # note that the -I. is needed to handle config.h when using VPATH
  57 .c.o:
  58 @OBJ_SAVE@
  59         $(CC) -I. -I$(srcdir) $(CFLAGS) $(CPPFLAGS) -c $< @CC_SHOBJ_FLAG@
  60 @OBJ_RESTORE@
  61
  62 all: conf_stop make_stop rsync$(EXEEXT) @MAKE_MAN@
  63
  64 install: all
  65         -mkdir -p ${DESTDIR}${bindir}
  66         ${INSTALLCMD} ${INSTALL_STRIP} -m 755 rsync$(EXEEXT) ${DESTDIR}${bindir}
  67         -mkdir -p ${DESTDIR}${mandir}/man1
  68         -mkdir -p ${DESTDIR}${mandir}/man5
  69         if test -f $(srcdir)/rsync.1; then ${INSTALLMAN} -m 644 $(srcdir)/rsync.1 ${DESTDIR}${mandir}/man1; fi
  70         if test -f $(srcdir)/rsyncd.conf.5; then ${INSTALLMAN} -m 644 $(srcdir)/rsyncd.conf.5 ${DESTDIR}${mandir}/man5; fi
  71
  72 install-strip:
  73         $(MAKE) INSTALL_STRIP='-s' install
  74
  75 rsync$(EXEEXT): $(OBJS)
  76         $(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(OBJS) $(LIBS)
  77
  78 $(OBJS): $(HEADERS)
  79 $(CHECK_OBJS): $(HEADERS)
  80
  81 flist.o: rounding.h
  82
  83 rounding.h: rounding.c rsync.h
  84         @for r in 0 1 3; do \
  85             if $(CC) $(CFLAGS) $(LDFLAGS) -o rounding -DEXTRA_ROUNDING=$$r -I. $(srcdir)/rounding.c >rounding.out 2>&1; then \
  86                 echo "#define EXTRA_ROUNDING $$r" >rounding.h; \
  87                 if test -f "$$HOME/build_farm/build_test.fns"; then \
  88                     echo "EXTRA_ROUNDING is $$r" >&2; \
  89                 fi; \
  90                 break; \
  91             fi; \
  92         done
  93         @rm -f rounding
  94         @if test -f rounding.h; then : ; else \
  95             cat rounding.out 1>&2; \
  96             echo "Failed to create rounding.h!" 1>&2; \
  97             exit 1; \
  98         fi
  99         @rm -f rounding.out
 100
 101 tls$(EXEEXT): $(TLS_OBJ)
 102         $(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(TLS_OBJ) $(LIBS)
 103
 104 getgroups$(EXEEXT): getgroups.o
 105         $(CC) $(CFLAGS) $(LDFLAGS) -o $@ getgroups.o $(LIBS)
 106
 107 getfsdev$(EXEEXT): getfsdev.o
 108         $(CC) $(CFLAGS) $(LDFLAGS) -o $@ getfsdev.o $(LIBS)
 109
 110 TRIMSLASH_OBJ = trimslash.o syscall.o lib/compat.o lib/snprintf.o
 111 trimslash$(EXEEXT): $(TRIMSLASH_OBJ)
 112         $(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(TRIMSLASH_OBJ) $(LIBS)
 113
 114 T_UNSAFE_OBJ = t_unsafe.o syscall.o util.o t_stub.o lib/compat.o lib/snprintf.o
 115 t_unsafe$(EXEEXT): $(T_UNSAFE_OBJ)
 116         $(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(T_UNSAFE_OBJ) $(LIBS)
 117
 118 gen: conf proto.h man
 119
 120 gensend: gen
 121         rsync -aivzc $(GENFILES) samba.org:/home/ftp/pub/rsync/generated-files/
 122
 123 conf:
 124         cd $(srcdir) && $(MAKE) -f prepare-source.mak conf
 125
 126 conf_stop: configure.sh config.h.in
 127
 128 configure.sh config.h.in: configure.in aclocal.m4
 129         autoconf -o configure.sh
 130         autoheader && touch config.h.in
 131         @echo 'Configure files changed -- perhaps run:'
 132         @echo '  make reconfigure'
 133         @exit 1
 134
 135 reconfigure: configure.sh
 136         ./config.status --recheck
 137         ./config.status
 138
 139 make_stop: Makefile
 140
 141 Makefile: Makefile.in config.status
 142         @./config.status
 143         @echo "Makefile updated -- rerun your make command."
 144         @exit 1
 145
 146 proto: proto.h-tstamp
 147
 148 proto.h: proto.h-tstamp
 149         @echo ' ' >/dev/null
 150
 151 proto.h-tstamp: $(srcdir)/*.c $(srcdir)/lib/compat.c
 152         perl $(srcdir)/mkproto.pl $(srcdir)/*.c $(srcdir)/lib/compat.c
 153
 154 man: rsync.1 rsyncd.conf.5
 155
 156 rsync.1: rsync.yo
 157         yodl2man -o rsync.1 $(srcdir)/rsync.yo
 158         -$(srcdir)/tweak_manpage rsync.1
 159
 160 rsyncd.conf.5: rsyncd.conf.yo
 161         yodl2man -o rsyncd.conf.5 $(srcdir)/rsyncd.conf.yo
 162         -$(srcdir)/tweak_manpage rsyncd.conf.5
 163
 164 clean: cleantests
 165         rm -f *~ $(OBJS) $(CHECK_PROGS) $(CHECK_OBJS) $(CHECK_SYMLINKS) \
 166                 rounding rounding.h
 167
 168 cleantests:
 169         rm -rf ./testtmp*
 170
 171 # We try to delete built files from both the source and build
 172 # directories, just in case somebody previously configured things in
 173 # the source directory.
 174 distclean: clean
 175         rm -f Makefile config.h config.status
 176         rm -f lib/dummy popt/dummy zlib/dummy
 177         rm -f $(srcdir)/Makefile $(srcdir)/config.h $(srcdir)/config.status
 178         rm -f $(srcdir)/lib/dummy $(srcdir)/popt/dummy $(srcdir)/zlib/dummy
 179         rm -f config.cache config.log
 180         rm -f $(srcdir)/config.cache $(srcdir)/config.log
 181         rm -f shconfig $(srcdir)/shconfig
 182         rm -f $(GENFILES)
 183         rm -rf autom4te.cache
 184
 185 # this target is really just for my use. It only works on a limited
 186 # range of machines and is used to produce a list of potentially
 187 # dead (ie. unused) functions in the code. (tridge)
 188 finddead:
 189         nm *.o */*.o |grep 'U ' | awk '{print $$2}' | sort -u > nmused.txt
 190         nm *.o */*.o |grep 'T ' | awk '{print $$3}' | sort -u > nmfns.txt
 191         comm -13 nmused.txt nmfns.txt
 192
 193 # 'check' is the GNU name, 'test' is the name for everybody else :-)
 194 .PHONY: check test
 195
 196 test: check
 197
 198 # There seems to be no standard way to specify some variables as
 199 # exported from a Makefile apart from listing them like this.
 200
 201 # This depends on building rsync; if we need any helper programs it
 202 # should depend on them too.
 203
 204 # We try to run the scripts with POSIX mode on, in the hope that will
 205 # catch Bash-isms earlier even if we're running on GNU.  Of course, we
 206 # might lose in the future where POSIX diverges from old sh.
 207
 208 check: all $(CHECK_PROGS) $(CHECK_SYMLINKS)
 209         rsync_bin=`pwd`/rsync$(EXEEXT) $(srcdir)/runtests.sh
 210
 211 check29: all $(CHECK_PROGS) $(CHECK_SYMLINKS)
 212         rsync_bin=`pwd`/rsync$(EXEEXT) $(srcdir)/runtests.sh --protocol=29
 213
 214 wildtest.o: wildtest.c lib/wildmatch.c rsync.h config.h
 215 wildtest$(EXEEXT): wildtest.o lib/compat.o lib/snprintf.o @BUILD_POPT@
 216         $(CC) $(CFLAGS) $(LDFLAGS) -o $@ wildtest.o lib/compat.o lib/snprintf.o @BUILD_POPT@ $(LIBS)
 217
 218 testsuite/chown-fake.test:
 219         ln -s chown.test $(srcdir)/testsuite/chown-fake.test
 220
 221 testsuite/devices-fake.test:
 222         ln -s devices.test $(srcdir)/testsuite/devices-fake.test
 223
 224 # This does *not* depend on building or installing: you can use it to
 225 # check a version installed from a binary or some other source tree,
 226 # if you want.
 227
 228 installcheck: $(CHECK_PROGS) $(CHECK_SYMLINKS)
 229         POSIXLY_CORRECT=1 TOOLDIR=`pwd` rsync_bin="$(bindir)/rsync$(EXEEXT)" srcdir="$(srcdir)" $(srcdir)/runtests.sh
 230
 231 # TODO: Add 'dist' target; need to know which files will be included
 232
 233 # Run the SPLINT (Secure Programming Lint) tool.  <www.splint.org>
 234 .PHONY: splint
 235 splint:
 236         splint +unixlib +gnuextensions -weak rsync.c
 237
 238
 239 rsync.dvi: doc/rsync.texinfo
 240         texi2dvi -o $@ $<
 241
 242 rsync.ps: rsync.dvi
 243         dvips -ta4 -o $@ $<
 244
 245 rsync.pdf: doc/rsync.texinfo
 246         texi2dvi -o $@ --pdf $<
 247
 248
 249 doxygen:
 250         cd $(srcdir) && rm dox/html/* && doxygen
 251
 252 # for maintainers only
 253 doxygen-upload:
 254         rsync -avzv $(srcdir)/dox/html/ --delete \
 255         samba.org:/home/httpd/html/rsync/doxygen/head/