We only need one capability marked with a "*".
[rsync.git] / io.c
blob6c3730c8f63d8d4c5a1858787612814bbf99d08f
1 /*
2 * Socket and pipe I/O utilities used in rsync.
4 * Copyright (C) 1996-2001 Andrew Tridgell
5 * Copyright (C) 1996 Paul Mackerras
6 * Copyright (C) 2001, 2002 Martin Pool <mbp@samba.org>
7 * Copyright (C) 2003-2020 Wayne Davison
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 3 of the License, or
12 * (at your option) any later version.
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
19 * You should have received a copy of the GNU General Public License along
20 * with this program; if not, visit the http://fsf.org website.
23 /* Rsync provides its own multiplexing system, which is used to send
24 * stderr and stdout over a single socket.
26 * For historical reasons this is off during the start of the
27 * connection, but it's switched on quite early using
28 * io_start_multiplex_out() and io_start_multiplex_in(). */
30 #include "rsync.h"
31 #include "ifuncs.h"
32 #include "inums.h"
34 /** If no timeout is specified then use a 60 second select timeout */
35 #define SELECT_TIMEOUT 60
37 extern int bwlimit;
38 extern size_t bwlimit_writemax;
39 extern int io_timeout;
40 extern int am_server;
41 extern int am_sender;
42 extern int am_receiver;
43 extern int am_generator;
44 extern int msgs2stderr;
45 extern int inc_recurse;
46 extern int io_error;
47 extern int batch_fd;
48 extern int eol_nulls;
49 extern int flist_eof;
50 extern int file_total;
51 extern int file_old_total;
52 extern int list_only;
53 extern int read_batch;
54 extern int compat_flags;
55 extern int protect_args;
56 extern int checksum_seed;
57 extern int protocol_version;
58 extern int remove_source_files;
59 extern int preserve_hard_links;
60 extern BOOL extra_flist_sending_enabled;
61 extern BOOL flush_ok_after_signal;
62 extern struct stats stats;
63 extern struct file_list *cur_flist;
64 #ifdef ICONV_OPTION
65 extern int filesfrom_convert;
66 extern iconv_t ic_send, ic_recv;
67 #endif
69 int csum_length = SHORT_SUM_LENGTH; /* initial value */
70 int allowed_lull = 0;
71 int msgdone_cnt = 0;
72 int forward_flist_data = 0;
73 BOOL flist_receiving_enabled = False;
75 /* Ignore an EOF error if non-zero. See whine_about_eof(). */
76 int kluge_around_eof = 0;
77 int got_kill_signal = -1; /* is set to 0 only after multiplexed I/O starts */
79 int sock_f_in = -1;
80 int sock_f_out = -1;
82 int64 total_data_read = 0;
83 int64 total_data_written = 0;
85 static struct {
86 xbuf in, out, msg;
87 int in_fd;
88 int out_fd; /* Both "out" and "msg" go to this fd. */
89 int in_multiplexed;
90 unsigned out_empty_len;
91 size_t raw_data_header_pos; /* in the out xbuf */
92 size_t raw_flushing_ends_before; /* in the out xbuf */
93 size_t raw_input_ends_before; /* in the in xbuf */
94 } iobuf = { .in_fd = -1, .out_fd = -1 };
96 static time_t last_io_in;
97 static time_t last_io_out;
99 static int write_batch_monitor_in = -1;
100 static int write_batch_monitor_out = -1;
102 static int ff_forward_fd = -1;
103 static int ff_reenable_multiplex = -1;
104 static char ff_lastchar = '\0';
105 static xbuf ff_xb = EMPTY_XBUF;
106 #ifdef ICONV_OPTION
107 static xbuf iconv_buf = EMPTY_XBUF;
108 #endif
109 static int select_timeout = SELECT_TIMEOUT;
110 static int active_filecnt = 0;
111 static OFF_T active_bytecnt = 0;
112 static int first_message = 1;
114 static char int_byte_extra[64] = {
115 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* (00 - 3F)/4 */
116 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* (40 - 7F)/4 */
117 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* (80 - BF)/4 */
118 2, 2, 2, 2, 2, 2, 2, 2, 3, 3, 3, 3, 4, 4, 5, 6, /* (C0 - FF)/4 */
121 /* Our I/O buffers are sized with no bits on in the lowest byte of the "size"
122 * (indeed, our rounding of sizes in 1024-byte units assures more than this).
123 * This allows the code that is storing bytes near the physical end of a
124 * circular buffer to temporarily reduce the buffer's size (in order to make
125 * some storing idioms easier), while also making it simple to restore the
126 * buffer's actual size when the buffer's "pos" wraps around to the start (we
127 * just round the buffer's size up again). */
129 #define IOBUF_WAS_REDUCED(siz) ((siz) & 0xFF)
130 #define IOBUF_RESTORE_SIZE(siz) (((siz) | 0xFF) + 1)
132 #define IN_MULTIPLEXED (iobuf.in_multiplexed != 0)
133 #define IN_MULTIPLEXED_AND_READY (iobuf.in_multiplexed > 0)
134 #define OUT_MULTIPLEXED (iobuf.out_empty_len != 0)
136 #define PIO_NEED_INPUT (1<<0) /* The *_NEED_* flags are mutually exclusive. */
137 #define PIO_NEED_OUTROOM (1<<1)
138 #define PIO_NEED_MSGROOM (1<<2)
140 #define PIO_CONSUME_INPUT (1<<4) /* Must becombined with PIO_NEED_INPUT. */
142 #define PIO_INPUT_AND_CONSUME (PIO_NEED_INPUT | PIO_CONSUME_INPUT)
143 #define PIO_NEED_FLAGS (PIO_NEED_INPUT | PIO_NEED_OUTROOM | PIO_NEED_MSGROOM)
145 #define REMOTE_OPTION_ERROR "rsync: on remote machine: -"
146 #define REMOTE_OPTION_ERROR2 ": unknown option"
148 #define FILESFROM_BUFLEN 2048
150 enum festatus { FES_SUCCESS, FES_REDO, FES_NO_SEND };
152 static flist_ndx_list redo_list, hlink_list;
154 static void read_a_msg(void);
155 static void drain_multiplex_messages(void);
156 static void sleep_for_bwlimit(int bytes_written);
158 static void check_timeout(BOOL allow_keepalive, int keepalive_flags)
160 time_t t, chk;
162 /* On the receiving side, the generator is now the one that decides
163 * when a timeout has occurred. When it is sifting through a lot of
164 * files looking for work, it will be sending keep-alive messages to
165 * the sender, and even though the receiver won't be sending/receiving
166 * anything (not even keep-alive messages), the successful writes to
167 * the sender will keep things going. If the receiver is actively
168 * receiving data, it will ensure that the generator knows that it is
169 * not idle by sending the generator keep-alive messages (since the
170 * generator might be blocked trying to send checksums, it needs to
171 * know that the receiver is active). Thus, as long as one or the
172 * other is successfully doing work, the generator will not timeout. */
173 if (!io_timeout)
174 return;
176 t = time(NULL);
178 if (allow_keepalive) {
179 /* This may put data into iobuf.msg w/o flushing. */
180 maybe_send_keepalive(t, keepalive_flags);
183 if (!last_io_in)
184 last_io_in = t;
186 if (am_receiver)
187 return;
189 chk = MAX(last_io_out, last_io_in);
190 if (t - chk >= io_timeout) {
191 if (am_server)
192 msgs2stderr = 1;
193 rprintf(FERROR, "[%s] io timeout after %d seconds -- exiting\n",
194 who_am_i(), (int)(t-chk));
195 exit_cleanup(RERR_TIMEOUT);
199 /* It's almost always an error to get an EOF when we're trying to read from the
200 * network, because the protocol is (for the most part) self-terminating.
202 * There is one case for the receiver when it is at the end of the transfer
203 * (hanging around reading any keep-alive packets that might come its way): if
204 * the sender dies before the generator's kill-signal comes through, we can end
205 * up here needing to loop until the kill-signal arrives. In this situation,
206 * kluge_around_eof will be < 0.
208 * There is another case for older protocol versions (< 24) where the module
209 * listing was not terminated, so we must ignore an EOF error in that case and
210 * exit. In this situation, kluge_around_eof will be > 0. */
211 static NORETURN void whine_about_eof(BOOL allow_kluge)
213 if (kluge_around_eof && allow_kluge) {
214 int i;
215 if (kluge_around_eof > 0)
216 exit_cleanup(0);
217 /* If we're still here after 10 seconds, exit with an error. */
218 for (i = 10*1000/20; i--; )
219 msleep(20);
222 rprintf(FERROR, RSYNC_NAME ": connection unexpectedly closed "
223 "(%s bytes received so far) [%s]\n",
224 big_num(stats.total_read), who_am_i());
226 exit_cleanup(RERR_STREAMIO);
229 /* Do a safe read, handling any needed looping and error handling.
230 * Returns the count of the bytes read, which will only be different
231 * from "len" if we encountered an EOF. This routine is not used on
232 * the socket except very early in the transfer. */
233 static size_t safe_read(int fd, char *buf, size_t len)
235 size_t got = 0;
237 assert(fd != iobuf.in_fd);
239 while (1) {
240 struct timeval tv;
241 fd_set r_fds, e_fds;
242 int cnt;
244 FD_ZERO(&r_fds);
245 FD_SET(fd, &r_fds);
246 FD_ZERO(&e_fds);
247 FD_SET(fd, &e_fds);
248 tv.tv_sec = select_timeout;
249 tv.tv_usec = 0;
251 cnt = select(fd+1, &r_fds, NULL, &e_fds, &tv);
252 if (cnt <= 0) {
253 if (cnt < 0 && errno == EBADF) {
254 rsyserr(FERROR, errno, "safe_read select failed");
255 exit_cleanup(RERR_FILEIO);
257 check_timeout(1, MSK_ALLOW_FLUSH);
258 continue;
261 /*if (FD_ISSET(fd, &e_fds))
262 rprintf(FINFO, "select exception on fd %d\n", fd); */
264 if (FD_ISSET(fd, &r_fds)) {
265 int n = read(fd, buf + got, len - got);
266 if (DEBUG_GTE(IO, 2))
267 rprintf(FINFO, "[%s] safe_read(%d)=%ld\n", who_am_i(), fd, (long)n);
268 if (n == 0)
269 break;
270 if (n < 0) {
271 if (errno == EINTR)
272 continue;
273 rsyserr(FERROR, errno, "safe_read failed to read %ld bytes", (long)len);
274 exit_cleanup(RERR_STREAMIO);
276 if ((got += (size_t)n) == len)
277 break;
281 return got;
284 static const char *what_fd_is(int fd)
286 static char buf[20];
288 if (fd == sock_f_out)
289 return "socket";
290 else if (fd == iobuf.out_fd)
291 return "message fd";
292 else if (fd == batch_fd)
293 return "batch file";
294 else {
295 snprintf(buf, sizeof buf, "fd %d", fd);
296 return buf;
300 /* Do a safe write, handling any needed looping and error handling.
301 * Returns only if everything was successfully written. This routine
302 * is not used on the socket except very early in the transfer. */
303 static void safe_write(int fd, const char *buf, size_t len)
305 int n;
307 assert(fd != iobuf.out_fd);
309 n = write(fd, buf, len);
310 if ((size_t)n == len)
311 return;
312 if (n < 0) {
313 if (errno != EINTR && errno != EWOULDBLOCK && errno != EAGAIN) {
314 write_failed:
315 rsyserr(FERROR, errno,
316 "safe_write failed to write %ld bytes to %s",
317 (long)len, what_fd_is(fd));
318 exit_cleanup(RERR_STREAMIO);
320 } else {
321 buf += n;
322 len -= n;
325 while (len) {
326 struct timeval tv;
327 fd_set w_fds;
328 int cnt;
330 FD_ZERO(&w_fds);
331 FD_SET(fd, &w_fds);
332 tv.tv_sec = select_timeout;
333 tv.tv_usec = 0;
335 cnt = select(fd + 1, NULL, &w_fds, NULL, &tv);
336 if (cnt <= 0) {
337 if (cnt < 0 && errno == EBADF) {
338 rsyserr(FERROR, errno, "safe_write select failed on %s", what_fd_is(fd));
339 exit_cleanup(RERR_FILEIO);
341 if (io_timeout)
342 maybe_send_keepalive(time(NULL), MSK_ALLOW_FLUSH);
343 continue;
346 if (FD_ISSET(fd, &w_fds)) {
347 n = write(fd, buf, len);
348 if (n < 0) {
349 if (errno == EINTR)
350 continue;
351 goto write_failed;
353 buf += n;
354 len -= n;
359 /* This is only called when files-from data is known to be available. We read
360 * a chunk of data and put it into the output buffer. */
361 static void forward_filesfrom_data(void)
363 int len;
365 len = read(ff_forward_fd, ff_xb.buf + ff_xb.len, ff_xb.size - ff_xb.len);
366 if (len <= 0) {
367 if (len == 0 || errno != EINTR) {
368 /* Send end-of-file marker */
369 ff_forward_fd = -1;
370 write_buf(iobuf.out_fd, "\0\0", ff_lastchar ? 2 : 1);
371 free_xbuf(&ff_xb);
372 if (ff_reenable_multiplex >= 0)
373 io_start_multiplex_out(ff_reenable_multiplex);
375 return;
378 if (DEBUG_GTE(IO, 2))
379 rprintf(FINFO, "[%s] files-from read=%ld\n", who_am_i(), (long)len);
381 #ifdef ICONV_OPTION
382 len += ff_xb.len;
383 #endif
385 if (!eol_nulls) {
386 char *s = ff_xb.buf + len;
387 /* Transform CR and/or LF into '\0' */
388 while (s-- > ff_xb.buf) {
389 if (*s == '\n' || *s == '\r')
390 *s = '\0';
394 if (ff_lastchar)
395 ff_xb.pos = 0;
396 else {
397 char *s = ff_xb.buf;
398 /* Last buf ended with a '\0', so don't let this buf start with one. */
399 while (len && *s == '\0')
400 s++, len--;
401 ff_xb.pos = s - ff_xb.buf;
404 #ifdef ICONV_OPTION
405 if (filesfrom_convert && len) {
406 char *sob = ff_xb.buf + ff_xb.pos, *s = sob;
407 char *eob = sob + len;
408 int flags = ICB_INCLUDE_BAD | ICB_INCLUDE_INCOMPLETE | ICB_CIRCULAR_OUT;
409 if (ff_lastchar == '\0')
410 flags |= ICB_INIT;
411 /* Convert/send each null-terminated string separately, skipping empties. */
412 while (s != eob) {
413 if (*s++ == '\0') {
414 ff_xb.len = s - sob - 1;
415 if (iconvbufs(ic_send, &ff_xb, &iobuf.out, flags) < 0)
416 exit_cleanup(RERR_PROTOCOL); /* impossible? */
417 write_buf(iobuf.out_fd, s-1, 1); /* Send the '\0'. */
418 while (s != eob && *s == '\0')
419 s++;
420 sob = s;
421 ff_xb.pos = sob - ff_xb.buf;
422 flags |= ICB_INIT;
426 if ((ff_xb.len = s - sob) == 0)
427 ff_lastchar = '\0';
428 else {
429 /* Handle a partial string specially, saving any incomplete chars. */
430 flags &= ~ICB_INCLUDE_INCOMPLETE;
431 if (iconvbufs(ic_send, &ff_xb, &iobuf.out, flags) < 0) {
432 if (errno == E2BIG)
433 exit_cleanup(RERR_PROTOCOL); /* impossible? */
434 if (ff_xb.pos)
435 memmove(ff_xb.buf, ff_xb.buf + ff_xb.pos, ff_xb.len);
437 ff_lastchar = 'x'; /* Anything non-zero. */
439 } else
440 #endif
442 if (len) {
443 char *f = ff_xb.buf + ff_xb.pos;
444 char *t = ff_xb.buf;
445 char *eob = f + len;
446 /* Eliminate any multi-'\0' runs. */
447 while (f != eob) {
448 if (!(*t++ = *f++)) {
449 while (f != eob && *f == '\0')
450 f++;
453 ff_lastchar = f[-1];
454 if ((len = t - ff_xb.buf) != 0) {
455 /* This will not circle back to perform_io() because we only get
456 * called when there is plenty of room in the output buffer. */
457 write_buf(iobuf.out_fd, ff_xb.buf, len);
462 void reduce_iobuf_size(xbuf *out, size_t new_size)
464 if (new_size < out->size) {
465 /* Avoid weird buffer interactions by only outputting this to stderr. */
466 if (msgs2stderr && DEBUG_GTE(IO, 4)) {
467 const char *name = out == &iobuf.out ? "iobuf.out"
468 : out == &iobuf.msg ? "iobuf.msg"
469 : NULL;
470 if (name) {
471 rprintf(FINFO, "[%s] reduced size of %s (-%d)\n",
472 who_am_i(), name, (int)(out->size - new_size));
475 out->size = new_size;
479 void restore_iobuf_size(xbuf *out)
481 if (IOBUF_WAS_REDUCED(out->size)) {
482 size_t new_size = IOBUF_RESTORE_SIZE(out->size);
483 /* Avoid weird buffer interactions by only outputting this to stderr. */
484 if (msgs2stderr && DEBUG_GTE(IO, 4)) {
485 const char *name = out == &iobuf.out ? "iobuf.out"
486 : out == &iobuf.msg ? "iobuf.msg"
487 : NULL;
488 if (name) {
489 rprintf(FINFO, "[%s] restored size of %s (+%d)\n",
490 who_am_i(), name, (int)(new_size - out->size));
493 out->size = new_size;
497 static void handle_kill_signal(BOOL flush_ok)
499 got_kill_signal = -1;
500 flush_ok_after_signal = flush_ok;
501 exit_cleanup(RERR_SIGNAL);
504 /* Perform buffered input and/or output until specified conditions are met.
505 * When given a "needed" read or write request, this returns without doing any
506 * I/O if the needed input bytes or write space is already available. Once I/O
507 * is needed, this will try to do whatever reading and/or writing is currently
508 * possible, up to the maximum buffer allowances, no matter if this is a read
509 * or write request. However, the I/O stops as soon as the required input
510 * bytes or output space is available. If this is not a read request, the
511 * routine may also do some advantageous reading of messages from a multiplexed
512 * input source (which ensures that we don't jam up with everyone in their
513 * "need to write" code and nobody reading the accumulated data that would make
514 * writing possible).
516 * The iobuf.in, .out and .msg buffers are all circular. Callers need to be
517 * aware that some data copies will need to be split when the bytes wrap around
518 * from the end to the start. In order to help make writing into the output
519 * buffers easier for some operations (such as the use of SIVAL() into the
520 * buffer) a buffer may be temporarily shortened by a small amount, but the
521 * original size will be automatically restored when the .pos wraps to the
522 * start. See also the 3 raw_* iobuf vars that are used in the handling of
523 * MSG_DATA bytes as they are read-from/written-into the buffers.
525 * When writing, we flush data in the following priority order:
527 * 1. Finish writing any in-progress MSG_DATA sequence from iobuf.out.
529 * 2. Write out all the messages from the message buf (if iobuf.msg is active).
530 * Yes, this means that a PIO_NEED_OUTROOM call will completely flush any
531 * messages before getting to the iobuf.out flushing (except for rule 1).
533 * 3. Write out the raw data from iobuf.out, possibly filling in the multiplexed
534 * MSG_DATA header that was pre-allocated (when output is multiplexed).
536 * TODO: items for possible future work:
538 * - Make this routine able to read the generator-to-receiver batch flow?
540 * Unlike the old routines that this replaces, it is OK to read ahead as far as
541 * we can because the read_a_msg() routine now reads its bytes out of the input
542 * buffer. In the old days, only raw data was in the input buffer, and any
543 * unused raw data in the buf would prevent the reading of socket data. */
544 static char *perform_io(size_t needed, int flags)
546 fd_set r_fds, e_fds, w_fds;
547 struct timeval tv;
548 int cnt, max_fd;
549 size_t empty_buf_len = 0;
550 xbuf *out;
551 char *data;
553 if (iobuf.in.len == 0 && iobuf.in.pos != 0) {
554 if (iobuf.raw_input_ends_before)
555 iobuf.raw_input_ends_before -= iobuf.in.pos;
556 iobuf.in.pos = 0;
559 switch (flags & PIO_NEED_FLAGS) {
560 case PIO_NEED_INPUT:
561 /* We never resize the circular input buffer. */
562 if (iobuf.in.size < needed) {
563 rprintf(FERROR, "need to read %ld bytes, iobuf.in.buf is only %ld bytes.\n",
564 (long)needed, (long)iobuf.in.size);
565 exit_cleanup(RERR_PROTOCOL);
568 if (msgs2stderr && DEBUG_GTE(IO, 3)) {
569 rprintf(FINFO, "[%s] perform_io(%ld, %sinput)\n",
570 who_am_i(), (long)needed, flags & PIO_CONSUME_INPUT ? "consume&" : "");
572 break;
574 case PIO_NEED_OUTROOM:
575 /* We never resize the circular output buffer. */
576 if (iobuf.out.size - iobuf.out_empty_len < needed) {
577 fprintf(stderr, "need to write %ld bytes, iobuf.out.buf is only %ld bytes.\n",
578 (long)needed, (long)(iobuf.out.size - iobuf.out_empty_len));
579 exit_cleanup(RERR_PROTOCOL);
582 if (msgs2stderr && DEBUG_GTE(IO, 3)) {
583 rprintf(FINFO, "[%s] perform_io(%ld, outroom) needs to flush %ld\n",
584 who_am_i(), (long)needed,
585 iobuf.out.len + needed > iobuf.out.size
586 ? (long)(iobuf.out.len + needed - iobuf.out.size) : 0L);
588 break;
590 case PIO_NEED_MSGROOM:
591 /* We never resize the circular message buffer. */
592 if (iobuf.msg.size < needed) {
593 fprintf(stderr, "need to write %ld bytes, iobuf.msg.buf is only %ld bytes.\n",
594 (long)needed, (long)iobuf.msg.size);
595 exit_cleanup(RERR_PROTOCOL);
598 if (msgs2stderr && DEBUG_GTE(IO, 3)) {
599 rprintf(FINFO, "[%s] perform_io(%ld, msgroom) needs to flush %ld\n",
600 who_am_i(), (long)needed,
601 iobuf.msg.len + needed > iobuf.msg.size
602 ? (long)(iobuf.msg.len + needed - iobuf.msg.size) : 0L);
604 break;
606 case 0:
607 if (msgs2stderr && DEBUG_GTE(IO, 3))
608 rprintf(FINFO, "[%s] perform_io(%ld, %d)\n", who_am_i(), (long)needed, flags);
609 break;
611 default:
612 exit_cleanup(RERR_UNSUPPORTED);
615 while (1) {
616 switch (flags & PIO_NEED_FLAGS) {
617 case PIO_NEED_INPUT:
618 if (iobuf.in.len >= needed)
619 goto double_break;
620 break;
621 case PIO_NEED_OUTROOM:
622 /* Note that iobuf.out_empty_len doesn't factor into this check
623 * because iobuf.out.len already holds any needed header len. */
624 if (iobuf.out.len + needed <= iobuf.out.size)
625 goto double_break;
626 break;
627 case PIO_NEED_MSGROOM:
628 if (iobuf.msg.len + needed <= iobuf.msg.size)
629 goto double_break;
630 break;
633 max_fd = -1;
635 FD_ZERO(&r_fds);
636 FD_ZERO(&e_fds);
637 if (iobuf.in_fd >= 0 && iobuf.in.size - iobuf.in.len) {
638 if (!read_batch || batch_fd >= 0) {
639 FD_SET(iobuf.in_fd, &r_fds);
640 FD_SET(iobuf.in_fd, &e_fds);
642 if (iobuf.in_fd > max_fd)
643 max_fd = iobuf.in_fd;
646 /* Only do more filesfrom processing if there is enough room in the out buffer. */
647 if (ff_forward_fd >= 0 && iobuf.out.size - iobuf.out.len > FILESFROM_BUFLEN*2) {
648 FD_SET(ff_forward_fd, &r_fds);
649 if (ff_forward_fd > max_fd)
650 max_fd = ff_forward_fd;
653 FD_ZERO(&w_fds);
654 if (iobuf.out_fd >= 0) {
655 if (iobuf.raw_flushing_ends_before
656 || (!iobuf.msg.len && iobuf.out.len > iobuf.out_empty_len && !(flags & PIO_NEED_MSGROOM))) {
657 if (OUT_MULTIPLEXED && !iobuf.raw_flushing_ends_before) {
658 /* The iobuf.raw_flushing_ends_before value can point off the end
659 * of the iobuf.out buffer for a while, for easier subtracting. */
660 iobuf.raw_flushing_ends_before = iobuf.out.pos + iobuf.out.len;
662 SIVAL(iobuf.out.buf + iobuf.raw_data_header_pos, 0,
663 ((MPLEX_BASE + (int)MSG_DATA)<<24) + iobuf.out.len - 4);
665 if (msgs2stderr && DEBUG_GTE(IO, 1)) {
666 rprintf(FINFO, "[%s] send_msg(%d, %ld)\n",
667 who_am_i(), (int)MSG_DATA, (long)iobuf.out.len - 4);
670 /* reserve room for the next MSG_DATA header */
671 iobuf.raw_data_header_pos = iobuf.raw_flushing_ends_before;
672 if (iobuf.raw_data_header_pos >= iobuf.out.size)
673 iobuf.raw_data_header_pos -= iobuf.out.size;
674 else if (iobuf.raw_data_header_pos + 4 > iobuf.out.size) {
675 /* The 4-byte header won't fit at the end of the buffer,
676 * so we'll temporarily reduce the output buffer's size
677 * and put the header at the start of the buffer. */
678 reduce_iobuf_size(&iobuf.out, iobuf.raw_data_header_pos);
679 iobuf.raw_data_header_pos = 0;
681 /* Yes, it is possible for this to make len > size for a while. */
682 iobuf.out.len += 4;
685 empty_buf_len = iobuf.out_empty_len;
686 out = &iobuf.out;
687 } else if (iobuf.msg.len) {
688 empty_buf_len = 0;
689 out = &iobuf.msg;
690 } else
691 out = NULL;
692 if (out) {
693 FD_SET(iobuf.out_fd, &w_fds);
694 if (iobuf.out_fd > max_fd)
695 max_fd = iobuf.out_fd;
697 } else
698 out = NULL;
700 if (max_fd < 0) {
701 switch (flags & PIO_NEED_FLAGS) {
702 case PIO_NEED_INPUT:
703 iobuf.in.len = 0;
704 if (kluge_around_eof == 2)
705 exit_cleanup(0);
706 if (iobuf.in_fd == -2)
707 whine_about_eof(True);
708 rprintf(FERROR, "error in perform_io: no fd for input.\n");
709 exit_cleanup(RERR_PROTOCOL);
710 case PIO_NEED_OUTROOM:
711 case PIO_NEED_MSGROOM:
712 msgs2stderr = 1;
713 drain_multiplex_messages();
714 if (iobuf.out_fd == -2)
715 whine_about_eof(True);
716 rprintf(FERROR, "error in perform_io: no fd for output.\n");
717 exit_cleanup(RERR_PROTOCOL);
718 default:
719 /* No stated needs, so I guess this is OK. */
720 break;
722 break;
725 if (got_kill_signal > 0)
726 handle_kill_signal(True);
728 if (extra_flist_sending_enabled) {
729 if (file_total - file_old_total < MAX_FILECNT_LOOKAHEAD && IN_MULTIPLEXED_AND_READY)
730 tv.tv_sec = 0;
731 else {
732 extra_flist_sending_enabled = False;
733 tv.tv_sec = select_timeout;
735 } else
736 tv.tv_sec = select_timeout;
737 tv.tv_usec = 0;
739 cnt = select(max_fd + 1, &r_fds, &w_fds, &e_fds, &tv);
741 if (cnt <= 0) {
742 if (cnt < 0 && errno == EBADF) {
743 msgs2stderr = 1;
744 exit_cleanup(RERR_SOCKETIO);
746 if (extra_flist_sending_enabled) {
747 extra_flist_sending_enabled = False;
748 send_extra_file_list(sock_f_out, -1);
749 extra_flist_sending_enabled = !flist_eof;
750 } else
751 check_timeout((flags & PIO_NEED_INPUT) != 0, 0);
752 FD_ZERO(&r_fds); /* Just in case... */
753 FD_ZERO(&w_fds);
756 if (iobuf.in_fd >= 0 && FD_ISSET(iobuf.in_fd, &r_fds)) {
757 size_t len, pos = iobuf.in.pos + iobuf.in.len;
758 int n;
759 if (pos >= iobuf.in.size) {
760 pos -= iobuf.in.size;
761 len = iobuf.in.size - iobuf.in.len;
762 } else
763 len = iobuf.in.size - pos;
764 if ((n = read(iobuf.in_fd, iobuf.in.buf + pos, len)) <= 0) {
765 if (n == 0) {
766 /* Signal that input has become invalid. */
767 if (!read_batch || batch_fd < 0 || am_generator)
768 iobuf.in_fd = -2;
769 batch_fd = -1;
770 continue;
772 if (errno == EINTR || errno == EWOULDBLOCK || errno == EAGAIN)
773 n = 0;
774 else {
775 /* Don't write errors on a dead socket. */
776 if (iobuf.in_fd == sock_f_in) {
777 if (am_sender)
778 msgs2stderr = 1;
779 rsyserr(FERROR_SOCKET, errno, "read error");
780 } else
781 rsyserr(FERROR, errno, "read error");
782 exit_cleanup(RERR_SOCKETIO);
785 if (msgs2stderr && DEBUG_GTE(IO, 2))
786 rprintf(FINFO, "[%s] recv=%ld\n", who_am_i(), (long)n);
788 if (io_timeout) {
789 last_io_in = time(NULL);
790 if (flags & PIO_NEED_INPUT)
791 maybe_send_keepalive(last_io_in, 0);
793 stats.total_read += n;
795 iobuf.in.len += n;
798 if (out && FD_ISSET(iobuf.out_fd, &w_fds)) {
799 size_t len = iobuf.raw_flushing_ends_before ? iobuf.raw_flushing_ends_before - out->pos : out->len;
800 int n;
802 if (bwlimit_writemax && len > bwlimit_writemax)
803 len = bwlimit_writemax;
805 if (out->pos + len > out->size)
806 len = out->size - out->pos;
807 if ((n = write(iobuf.out_fd, out->buf + out->pos, len)) <= 0) {
808 if (errno == EINTR || errno == EWOULDBLOCK || errno == EAGAIN)
809 n = 0;
810 else {
811 /* Don't write errors on a dead socket. */
812 msgs2stderr = 1;
813 iobuf.out_fd = -2;
814 iobuf.out.len = iobuf.msg.len = iobuf.raw_flushing_ends_before = 0;
815 rsyserr(FERROR_SOCKET, errno, "write error");
816 drain_multiplex_messages();
817 exit_cleanup(RERR_SOCKETIO);
820 if (msgs2stderr && DEBUG_GTE(IO, 2)) {
821 rprintf(FINFO, "[%s] %s sent=%ld\n",
822 who_am_i(), out == &iobuf.out ? "out" : "msg", (long)n);
825 if (io_timeout)
826 last_io_out = time(NULL);
827 stats.total_written += n;
829 if (bwlimit_writemax)
830 sleep_for_bwlimit(n);
832 if ((out->pos += n) == out->size) {
833 if (iobuf.raw_flushing_ends_before)
834 iobuf.raw_flushing_ends_before -= out->size;
835 out->pos = 0;
836 restore_iobuf_size(out);
837 } else if (out->pos == iobuf.raw_flushing_ends_before)
838 iobuf.raw_flushing_ends_before = 0;
839 if ((out->len -= n) == empty_buf_len) {
840 out->pos = 0;
841 restore_iobuf_size(out);
842 if (empty_buf_len)
843 iobuf.raw_data_header_pos = 0;
847 if (got_kill_signal > 0)
848 handle_kill_signal(True);
850 /* We need to help prevent deadlock by doing what reading
851 * we can whenever we are here trying to write. */
852 if (IN_MULTIPLEXED_AND_READY && !(flags & PIO_NEED_INPUT)) {
853 while (!iobuf.raw_input_ends_before && iobuf.in.len > 512)
854 read_a_msg();
855 if (flist_receiving_enabled && iobuf.in.len > 512)
856 wait_for_receiver(); /* generator only */
859 if (ff_forward_fd >= 0 && FD_ISSET(ff_forward_fd, &r_fds)) {
860 /* This can potentially flush all output and enable
861 * multiplexed output, so keep this last in the loop
862 * and be sure to not cache anything that would break
863 * such a change. */
864 forward_filesfrom_data();
867 double_break:
869 if (got_kill_signal > 0)
870 handle_kill_signal(True);
872 data = iobuf.in.buf + iobuf.in.pos;
874 if (flags & PIO_CONSUME_INPUT) {
875 iobuf.in.len -= needed;
876 iobuf.in.pos += needed;
877 if (iobuf.in.pos == iobuf.raw_input_ends_before)
878 iobuf.raw_input_ends_before = 0;
879 if (iobuf.in.pos >= iobuf.in.size) {
880 iobuf.in.pos -= iobuf.in.size;
881 if (iobuf.raw_input_ends_before)
882 iobuf.raw_input_ends_before -= iobuf.in.size;
886 return data;
889 static void raw_read_buf(char *buf, size_t len)
891 size_t pos = iobuf.in.pos;
892 char *data = perform_io(len, PIO_INPUT_AND_CONSUME);
893 if (iobuf.in.pos <= pos && len) {
894 size_t siz = len - iobuf.in.pos;
895 memcpy(buf, data, siz);
896 memcpy(buf + siz, iobuf.in.buf, iobuf.in.pos);
897 } else
898 memcpy(buf, data, len);
901 static int32 raw_read_int(void)
903 char *data, buf[4];
904 if (iobuf.in.size - iobuf.in.pos >= 4)
905 data = perform_io(4, PIO_INPUT_AND_CONSUME);
906 else
907 raw_read_buf(data = buf, 4);
908 return IVAL(data, 0);
911 void noop_io_until_death(void)
913 char buf[1024];
915 if (!iobuf.in.buf || !iobuf.out.buf || iobuf.in_fd < 0 || iobuf.out_fd < 0 || kluge_around_eof || msgs2stderr)
916 return;
918 kluge_around_eof = 2;
919 /* Setting an I/O timeout ensures that if something inexplicably weird
920 * happens, we won't hang around forever. */
921 if (!io_timeout)
922 set_io_timeout(60);
924 while (1)
925 read_buf(iobuf.in_fd, buf, sizeof buf);
928 /* Buffer a message for the multiplexed output stream. Is not used for (normal) MSG_DATA. */
929 int send_msg(enum msgcode code, const char *buf, size_t len, int convert)
931 char *hdr;
932 size_t needed, pos;
933 BOOL want_debug = DEBUG_GTE(IO, 1) && convert >= 0 && (msgs2stderr || code != MSG_INFO);
935 if (!OUT_MULTIPLEXED)
936 return 0;
938 if (want_debug)
939 rprintf(FINFO, "[%s] send_msg(%d, %ld)\n", who_am_i(), (int)code, (long)len);
941 /* When checking for enough free space for this message, we need to
942 * make sure that there is space for the 4-byte header, plus we'll
943 * assume that we may waste up to 3 bytes (if the header doesn't fit
944 * at the physical end of the buffer). */
945 #ifdef ICONV_OPTION
946 if (convert > 0 && ic_send == (iconv_t)-1)
947 convert = 0;
948 if (convert > 0) {
949 /* Ensuring double-size room leaves space for maximal conversion expansion. */
950 needed = len*2 + 4 + 3;
951 } else
952 #endif
953 needed = len + 4 + 3;
954 if (iobuf.msg.len + needed > iobuf.msg.size) {
955 if (!am_receiver)
956 perform_io(needed, PIO_NEED_MSGROOM);
957 else { /* We allow the receiver to increase their iobuf.msg size to avoid a deadlock. */
958 size_t old_size = iobuf.msg.size;
959 restore_iobuf_size(&iobuf.msg);
960 realloc_xbuf(&iobuf.msg, iobuf.msg.size * 2);
961 if (iobuf.msg.pos + iobuf.msg.len > old_size)
962 memcpy(iobuf.msg.buf + old_size, iobuf.msg.buf, iobuf.msg.pos + iobuf.msg.len - old_size);
966 pos = iobuf.msg.pos + iobuf.msg.len; /* Must be set after any flushing. */
967 if (pos >= iobuf.msg.size)
968 pos -= iobuf.msg.size;
969 else if (pos + 4 > iobuf.msg.size) {
970 /* The 4-byte header won't fit at the end of the buffer,
971 * so we'll temporarily reduce the message buffer's size
972 * and put the header at the start of the buffer. */
973 reduce_iobuf_size(&iobuf.msg, pos);
974 pos = 0;
976 hdr = iobuf.msg.buf + pos;
978 iobuf.msg.len += 4; /* Allocate room for the coming header bytes. */
980 #ifdef ICONV_OPTION
981 if (convert > 0) {
982 xbuf inbuf;
984 INIT_XBUF(inbuf, (char*)buf, len, (size_t)-1);
986 len = iobuf.msg.len;
987 iconvbufs(ic_send, &inbuf, &iobuf.msg,
988 ICB_INCLUDE_BAD | ICB_INCLUDE_INCOMPLETE | ICB_CIRCULAR_OUT | ICB_INIT);
989 if (inbuf.len > 0) {
990 rprintf(FERROR, "overflowed iobuf.msg buffer in send_msg");
991 exit_cleanup(RERR_UNSUPPORTED);
993 len = iobuf.msg.len - len;
994 } else
995 #endif
997 size_t siz;
999 if ((pos += 4) == iobuf.msg.size)
1000 pos = 0;
1002 /* Handle a split copy if we wrap around the end of the circular buffer. */
1003 if (pos >= iobuf.msg.pos && (siz = iobuf.msg.size - pos) < len) {
1004 memcpy(iobuf.msg.buf + pos, buf, siz);
1005 memcpy(iobuf.msg.buf, buf + siz, len - siz);
1006 } else
1007 memcpy(iobuf.msg.buf + pos, buf, len);
1009 iobuf.msg.len += len;
1012 SIVAL(hdr, 0, ((MPLEX_BASE + (int)code)<<24) + len);
1014 if (want_debug && convert > 0)
1015 rprintf(FINFO, "[%s] converted msg len=%ld\n", who_am_i(), (long)len);
1017 return 1;
1020 void send_msg_int(enum msgcode code, int num)
1022 char numbuf[4];
1024 if (DEBUG_GTE(IO, 1))
1025 rprintf(FINFO, "[%s] send_msg_int(%d, %d)\n", who_am_i(), (int)code, num);
1027 SIVAL(numbuf, 0, num);
1028 send_msg(code, numbuf, 4, -1);
1031 static void got_flist_entry_status(enum festatus status, int ndx)
1033 struct file_list *flist = flist_for_ndx(ndx, "got_flist_entry_status");
1035 if (remove_source_files) {
1036 active_filecnt--;
1037 active_bytecnt -= F_LENGTH(flist->files[ndx - flist->ndx_start]);
1040 if (inc_recurse)
1041 flist->in_progress--;
1043 switch (status) {
1044 case FES_SUCCESS:
1045 if (remove_source_files)
1046 send_msg_int(MSG_SUCCESS, ndx);
1047 /* FALL THROUGH */
1048 case FES_NO_SEND:
1049 #ifdef SUPPORT_HARD_LINKS
1050 if (preserve_hard_links) {
1051 struct file_struct *file = flist->files[ndx - flist->ndx_start];
1052 if (F_IS_HLINKED(file)) {
1053 if (status == FES_NO_SEND)
1054 flist_ndx_push(&hlink_list, -2); /* indicates a failure follows */
1055 flist_ndx_push(&hlink_list, ndx);
1056 if (inc_recurse)
1057 flist->in_progress++;
1060 #endif
1061 break;
1062 case FES_REDO:
1063 if (read_batch) {
1064 if (inc_recurse)
1065 flist->in_progress++;
1066 break;
1068 if (inc_recurse)
1069 flist->to_redo++;
1070 flist_ndx_push(&redo_list, ndx);
1071 break;
1075 /* Note the fds used for the main socket (which might really be a pipe
1076 * for a local transfer, but we can ignore that). */
1077 void io_set_sock_fds(int f_in, int f_out)
1079 sock_f_in = f_in;
1080 sock_f_out = f_out;
1083 void set_io_timeout(int secs)
1085 io_timeout = secs;
1086 allowed_lull = (io_timeout + 1) / 2;
1088 if (!io_timeout || allowed_lull > SELECT_TIMEOUT)
1089 select_timeout = SELECT_TIMEOUT;
1090 else
1091 select_timeout = allowed_lull;
1093 if (read_batch)
1094 allowed_lull = 0;
1097 static void check_for_d_option_error(const char *msg)
1099 static char rsync263_opts[] = "BCDHIKLPRSTWabceghlnopqrtuvxz";
1100 char *colon;
1101 int saw_d = 0;
1103 if (*msg != 'r'
1104 || strncmp(msg, REMOTE_OPTION_ERROR, sizeof REMOTE_OPTION_ERROR - 1) != 0)
1105 return;
1107 msg += sizeof REMOTE_OPTION_ERROR - 1;
1108 if (*msg == '-' || (colon = strchr(msg, ':')) == NULL
1109 || strncmp(colon, REMOTE_OPTION_ERROR2, sizeof REMOTE_OPTION_ERROR2 - 1) != 0)
1110 return;
1112 for ( ; *msg != ':'; msg++) {
1113 if (*msg == 'd')
1114 saw_d = 1;
1115 else if (*msg == 'e')
1116 break;
1117 else if (strchr(rsync263_opts, *msg) == NULL)
1118 return;
1121 if (saw_d) {
1122 rprintf(FWARNING, "*** Try using \"--old-d\" if remote rsync is <= 2.6.3 ***\n");
1126 /* This is used by the generator to limit how many file transfers can
1127 * be active at once when --remove-source-files is specified. Without
1128 * this, sender-side deletions were mostly happening at the end. */
1129 void increment_active_files(int ndx, int itemizing, enum logcode code)
1131 while (1) {
1132 /* TODO: tune these limits? */
1133 int limit = active_bytecnt >= 128*1024 ? 10 : 50;
1134 if (active_filecnt < limit)
1135 break;
1136 check_for_finished_files(itemizing, code, 0);
1137 if (active_filecnt < limit)
1138 break;
1139 wait_for_receiver();
1142 active_filecnt++;
1143 active_bytecnt += F_LENGTH(cur_flist->files[ndx - cur_flist->ndx_start]);
1146 int get_redo_num(void)
1148 return flist_ndx_pop(&redo_list);
1151 int get_hlink_num(void)
1153 return flist_ndx_pop(&hlink_list);
1156 /* When we're the receiver and we have a local --files-from list of names
1157 * that needs to be sent over the socket to the sender, we have to do two
1158 * things at the same time: send the sender a list of what files we're
1159 * processing and read the incoming file+info list from the sender. We do
1160 * this by making recv_file_list() call forward_filesfrom_data(), which
1161 * will ensure that we forward data to the sender until we get some data
1162 * for recv_file_list() to use. */
1163 void start_filesfrom_forwarding(int fd)
1165 if (protocol_version < 31 && OUT_MULTIPLEXED) {
1166 /* Older protocols send the files-from data w/o packaging
1167 * it in multiplexed I/O packets, so temporarily switch
1168 * to buffered I/O to match this behavior. */
1169 iobuf.msg.pos = iobuf.msg.len = 0; /* Be extra sure no messages go out. */
1170 ff_reenable_multiplex = io_end_multiplex_out(MPLX_TO_BUFFERED);
1172 ff_forward_fd = fd;
1174 alloc_xbuf(&ff_xb, FILESFROM_BUFLEN);
1177 /* Read a line into the "buf" buffer. */
1178 int read_line(int fd, char *buf, size_t bufsiz, int flags)
1180 char ch, *s, *eob;
1182 #ifdef ICONV_OPTION
1183 if (flags & RL_CONVERT && iconv_buf.size < bufsiz)
1184 realloc_xbuf(&iconv_buf, ROUND_UP_1024(bufsiz) + 1024);
1185 #endif
1187 start:
1188 #ifdef ICONV_OPTION
1189 s = flags & RL_CONVERT ? iconv_buf.buf : buf;
1190 #else
1191 s = buf;
1192 #endif
1193 eob = s + bufsiz - 1;
1194 while (1) {
1195 /* We avoid read_byte() for files because files can return an EOF. */
1196 if (fd == iobuf.in_fd)
1197 ch = read_byte(fd);
1198 else if (safe_read(fd, &ch, 1) == 0)
1199 break;
1200 if (flags & RL_EOL_NULLS ? ch == '\0' : (ch == '\r' || ch == '\n')) {
1201 /* Skip empty lines if dumping comments. */
1202 if (flags & RL_DUMP_COMMENTS && s == buf)
1203 continue;
1204 break;
1206 if (s < eob)
1207 *s++ = ch;
1209 *s = '\0';
1211 if (flags & RL_DUMP_COMMENTS && (*buf == '#' || *buf == ';'))
1212 goto start;
1214 #ifdef ICONV_OPTION
1215 if (flags & RL_CONVERT) {
1216 xbuf outbuf;
1217 INIT_XBUF(outbuf, buf, 0, bufsiz);
1218 iconv_buf.pos = 0;
1219 iconv_buf.len = s - iconv_buf.buf;
1220 iconvbufs(ic_recv, &iconv_buf, &outbuf,
1221 ICB_INCLUDE_BAD | ICB_INCLUDE_INCOMPLETE | ICB_INIT);
1222 outbuf.buf[outbuf.len] = '\0';
1223 return outbuf.len;
1225 #endif
1227 return s - buf;
1230 void read_args(int f_in, char *mod_name, char *buf, size_t bufsiz, int rl_nulls,
1231 char ***argv_p, int *argc_p, char **request_p)
1233 int maxargs = MAX_ARGS;
1234 int dot_pos = 0, argc = 0, request_len = 0;
1235 char **argv, *p;
1236 int rl_flags = (rl_nulls ? RL_EOL_NULLS : 0);
1238 #ifdef ICONV_OPTION
1239 rl_flags |= (protect_args && ic_recv != (iconv_t)-1 ? RL_CONVERT : 0);
1240 #endif
1242 if (!(argv = new_array(char *, maxargs)))
1243 out_of_memory("read_args");
1244 if (mod_name && !protect_args)
1245 argv[argc++] = "rsyncd";
1247 if (request_p)
1248 *request_p = NULL;
1250 while (1) {
1251 if (read_line(f_in, buf, bufsiz, rl_flags) == 0)
1252 break;
1254 if (argc == maxargs-1) {
1255 maxargs += MAX_ARGS;
1256 if (!(argv = realloc_array(argv, char *, maxargs)))
1257 out_of_memory("read_args");
1260 if (dot_pos) {
1261 if (request_p && request_len < 1024) {
1262 int len = strlen(buf);
1263 if (request_len)
1264 request_p[0][request_len++] = ' ';
1265 if (!(*request_p = realloc_array(*request_p, char, request_len + len + 1)))
1266 out_of_memory("read_args");
1267 memcpy(*request_p + request_len, buf, len + 1);
1268 request_len += len;
1270 if (mod_name)
1271 glob_expand_module(mod_name, buf, &argv, &argc, &maxargs);
1272 else
1273 glob_expand(buf, &argv, &argc, &maxargs);
1274 } else {
1275 if (!(p = strdup(buf)))
1276 out_of_memory("read_args");
1277 argv[argc++] = p;
1278 if (*p == '.' && p[1] == '\0')
1279 dot_pos = argc;
1282 argv[argc] = NULL;
1284 glob_expand(NULL, NULL, NULL, NULL);
1286 *argc_p = argc;
1287 *argv_p = argv;
1290 BOOL io_start_buffering_out(int f_out)
1292 if (msgs2stderr && DEBUG_GTE(IO, 2))
1293 rprintf(FINFO, "[%s] io_start_buffering_out(%d)\n", who_am_i(), f_out);
1295 if (iobuf.out.buf) {
1296 if (iobuf.out_fd == -1)
1297 iobuf.out_fd = f_out;
1298 else
1299 assert(f_out == iobuf.out_fd);
1300 return False;
1303 alloc_xbuf(&iobuf.out, ROUND_UP_1024(IO_BUFFER_SIZE * 2));
1304 iobuf.out_fd = f_out;
1306 return True;
1309 BOOL io_start_buffering_in(int f_in)
1311 if (msgs2stderr && DEBUG_GTE(IO, 2))
1312 rprintf(FINFO, "[%s] io_start_buffering_in(%d)\n", who_am_i(), f_in);
1314 if (iobuf.in.buf) {
1315 if (iobuf.in_fd == -1)
1316 iobuf.in_fd = f_in;
1317 else
1318 assert(f_in == iobuf.in_fd);
1319 return False;
1322 alloc_xbuf(&iobuf.in, ROUND_UP_1024(IO_BUFFER_SIZE));
1323 iobuf.in_fd = f_in;
1325 return True;
1328 void io_end_buffering_in(BOOL free_buffers)
1330 if (msgs2stderr && DEBUG_GTE(IO, 2)) {
1331 rprintf(FINFO, "[%s] io_end_buffering_in(IOBUF_%s_BUFS)\n",
1332 who_am_i(), free_buffers ? "FREE" : "KEEP");
1335 if (free_buffers)
1336 free_xbuf(&iobuf.in);
1337 else
1338 iobuf.in.pos = iobuf.in.len = 0;
1340 iobuf.in_fd = -1;
1343 void io_end_buffering_out(BOOL free_buffers)
1345 if (msgs2stderr && DEBUG_GTE(IO, 2)) {
1346 rprintf(FINFO, "[%s] io_end_buffering_out(IOBUF_%s_BUFS)\n",
1347 who_am_i(), free_buffers ? "FREE" : "KEEP");
1350 io_flush(FULL_FLUSH);
1352 if (free_buffers) {
1353 free_xbuf(&iobuf.out);
1354 free_xbuf(&iobuf.msg);
1357 iobuf.out_fd = -1;
1360 void maybe_flush_socket(int important)
1362 if (flist_eof && iobuf.out.buf && iobuf.out.len > iobuf.out_empty_len
1363 && (important || time(NULL) - last_io_out >= 5))
1364 io_flush(NORMAL_FLUSH);
1367 /* Older rsync versions used to send either a MSG_NOOP (protocol 30) or a
1368 * raw-data-based keep-alive (protocol 29), both of which implied forwarding of
1369 * the message through the sender. Since the new timeout method does not need
1370 * any forwarding, we just send an empty MSG_DATA message, which works with all
1371 * rsync versions. This avoids any message forwarding, and leaves the raw-data
1372 * stream alone (since we can never be quite sure if that stream is in the
1373 * right state for a keep-alive message). */
1374 void maybe_send_keepalive(time_t now, int flags)
1376 if (flags & MSK_ACTIVE_RECEIVER)
1377 last_io_in = now; /* Fudge things when we're working hard on the files. */
1379 /* Early in the transfer (before the receiver forks) the receiving side doesn't
1380 * care if it hasn't sent data in a while as long as it is receiving data (in
1381 * fact, a pre-3.1.0 rsync would die if we tried to send it a keep alive during
1382 * this time). So, if we're an early-receiving proc, just return and let the
1383 * incoming data determine if we timeout. */
1384 if (!am_sender && !am_receiver && !am_generator)
1385 return;
1387 if (now - last_io_out >= allowed_lull) {
1388 /* The receiver is special: it only sends keep-alive messages if it is
1389 * actively receiving data. Otherwise, it lets the generator timeout. */
1390 if (am_receiver && now - last_io_in >= io_timeout)
1391 return;
1393 if (!iobuf.msg.len && iobuf.out.len == iobuf.out_empty_len)
1394 send_msg(MSG_DATA, "", 0, 0);
1395 if (!(flags & MSK_ALLOW_FLUSH)) {
1396 /* Let the caller worry about writing out the data. */
1397 } else if (iobuf.msg.len)
1398 perform_io(iobuf.msg.size - iobuf.msg.len + 1, PIO_NEED_MSGROOM);
1399 else if (iobuf.out.len > iobuf.out_empty_len)
1400 io_flush(NORMAL_FLUSH);
1404 void start_flist_forward(int ndx)
1406 write_int(iobuf.out_fd, ndx);
1407 forward_flist_data = 1;
1410 void stop_flist_forward(void)
1412 forward_flist_data = 0;
1415 /* Read a message from a multiplexed source. */
1416 static void read_a_msg(void)
1418 char data[BIGPATHBUFLEN];
1419 int tag, val;
1420 size_t msg_bytes;
1422 /* This ensures that perform_io() does not try to do any message reading
1423 * until we've read all of the data for this message. We should also
1424 * try to avoid calling things that will cause data to be written via
1425 * perform_io() prior to this being reset to 1. */
1426 iobuf.in_multiplexed = -1;
1428 tag = raw_read_int();
1430 msg_bytes = tag & 0xFFFFFF;
1431 tag = (tag >> 24) - MPLEX_BASE;
1433 if (DEBUG_GTE(IO, 1) && msgs2stderr)
1434 rprintf(FINFO, "[%s] got msg=%d, len=%ld\n", who_am_i(), (int)tag, (long)msg_bytes);
1436 switch (tag) {
1437 case MSG_DATA:
1438 assert(iobuf.raw_input_ends_before == 0);
1439 /* Though this does not yet read the data, we do mark where in
1440 * the buffer the msg data will end once it is read. It is
1441 * possible that this points off the end of the buffer, in
1442 * which case the gradual reading of the input stream will
1443 * cause this value to wrap around and eventually become real. */
1444 if (msg_bytes)
1445 iobuf.raw_input_ends_before = iobuf.in.pos + msg_bytes;
1446 iobuf.in_multiplexed = 1;
1447 break;
1448 case MSG_STATS:
1449 if (msg_bytes != sizeof stats.total_read || !am_generator)
1450 goto invalid_msg;
1451 raw_read_buf((char*)&stats.total_read, sizeof stats.total_read);
1452 iobuf.in_multiplexed = 1;
1453 break;
1454 case MSG_REDO:
1455 if (msg_bytes != 4 || !am_generator)
1456 goto invalid_msg;
1457 val = raw_read_int();
1458 iobuf.in_multiplexed = 1;
1459 got_flist_entry_status(FES_REDO, val);
1460 break;
1461 case MSG_IO_ERROR:
1462 if (msg_bytes != 4)
1463 goto invalid_msg;
1464 val = raw_read_int();
1465 iobuf.in_multiplexed = 1;
1466 io_error |= val;
1467 if (am_receiver)
1468 send_msg_int(MSG_IO_ERROR, val);
1469 break;
1470 case MSG_IO_TIMEOUT:
1471 if (msg_bytes != 4 || am_server || am_generator)
1472 goto invalid_msg;
1473 val = raw_read_int();
1474 iobuf.in_multiplexed = 1;
1475 if (!io_timeout || io_timeout > val) {
1476 if (INFO_GTE(MISC, 2))
1477 rprintf(FINFO, "Setting --timeout=%d to match server\n", val);
1478 set_io_timeout(val);
1480 break;
1481 case MSG_NOOP:
1482 /* Support protocol-30 keep-alive method. */
1483 if (msg_bytes != 0)
1484 goto invalid_msg;
1485 iobuf.in_multiplexed = 1;
1486 if (am_sender)
1487 maybe_send_keepalive(time(NULL), MSK_ALLOW_FLUSH);
1488 break;
1489 case MSG_DELETED:
1490 if (msg_bytes >= sizeof data)
1491 goto overflow;
1492 if (am_generator) {
1493 raw_read_buf(data, msg_bytes);
1494 iobuf.in_multiplexed = 1;
1495 send_msg(MSG_DELETED, data, msg_bytes, 1);
1496 break;
1498 #ifdef ICONV_OPTION
1499 if (ic_recv != (iconv_t)-1) {
1500 xbuf outbuf, inbuf;
1501 char ibuf[512];
1502 int add_null = 0;
1503 int flags = ICB_INCLUDE_BAD | ICB_INIT;
1505 INIT_CONST_XBUF(outbuf, data);
1506 INIT_XBUF(inbuf, ibuf, 0, (size_t)-1);
1508 while (msg_bytes) {
1509 size_t len = msg_bytes > sizeof ibuf - inbuf.len ? sizeof ibuf - inbuf.len : msg_bytes;
1510 raw_read_buf(ibuf + inbuf.len, len);
1511 inbuf.pos = 0;
1512 inbuf.len += len;
1513 if (!(msg_bytes -= len) && !ibuf[inbuf.len-1])
1514 inbuf.len--, add_null = 1;
1515 if (iconvbufs(ic_send, &inbuf, &outbuf, flags) < 0) {
1516 if (errno == E2BIG)
1517 goto overflow;
1518 /* Buffer ended with an incomplete char, so move the
1519 * bytes to the start of the buffer and continue. */
1520 memmove(ibuf, ibuf + inbuf.pos, inbuf.len);
1522 flags &= ~ICB_INIT;
1524 if (add_null) {
1525 if (outbuf.len == outbuf.size)
1526 goto overflow;
1527 outbuf.buf[outbuf.len++] = '\0';
1529 msg_bytes = outbuf.len;
1530 } else
1531 #endif
1532 raw_read_buf(data, msg_bytes);
1533 iobuf.in_multiplexed = 1;
1534 /* A directory name was sent with the trailing null */
1535 if (msg_bytes > 0 && !data[msg_bytes-1])
1536 log_delete(data, S_IFDIR);
1537 else {
1538 data[msg_bytes] = '\0';
1539 log_delete(data, S_IFREG);
1541 break;
1542 case MSG_SUCCESS:
1543 if (msg_bytes != 4) {
1544 invalid_msg:
1545 rprintf(FERROR, "invalid multi-message %d:%lu [%s%s]\n",
1546 tag, (unsigned long)msg_bytes, who_am_i(),
1547 inc_recurse ? "/inc" : "");
1548 exit_cleanup(RERR_STREAMIO);
1550 val = raw_read_int();
1551 iobuf.in_multiplexed = 1;
1552 if (am_generator)
1553 got_flist_entry_status(FES_SUCCESS, val);
1554 else
1555 successful_send(val);
1556 break;
1557 case MSG_NO_SEND:
1558 if (msg_bytes != 4)
1559 goto invalid_msg;
1560 val = raw_read_int();
1561 iobuf.in_multiplexed = 1;
1562 if (am_generator)
1563 got_flist_entry_status(FES_NO_SEND, val);
1564 else
1565 send_msg_int(MSG_NO_SEND, val);
1566 break;
1567 case MSG_ERROR_SOCKET:
1568 case MSG_ERROR_UTF8:
1569 case MSG_CLIENT:
1570 case MSG_LOG:
1571 if (!am_generator)
1572 goto invalid_msg;
1573 if (tag == MSG_ERROR_SOCKET)
1574 msgs2stderr = 1;
1575 /* FALL THROUGH */
1576 case MSG_INFO:
1577 case MSG_ERROR:
1578 case MSG_ERROR_XFER:
1579 case MSG_WARNING:
1580 if (msg_bytes >= sizeof data) {
1581 overflow:
1582 rprintf(FERROR,
1583 "multiplexing overflow %d:%lu [%s%s]\n",
1584 tag, (unsigned long)msg_bytes, who_am_i(),
1585 inc_recurse ? "/inc" : "");
1586 exit_cleanup(RERR_STREAMIO);
1588 raw_read_buf(data, msg_bytes);
1589 /* We don't set in_multiplexed value back to 1 before writing this message
1590 * because the write might loop back and read yet another message, over and
1591 * over again, while waiting for room to put the message in the msg buffer. */
1592 rwrite((enum logcode)tag, data, msg_bytes, !am_generator);
1593 iobuf.in_multiplexed = 1;
1594 if (first_message) {
1595 if (list_only && !am_sender && tag == 1 && msg_bytes < sizeof data) {
1596 data[msg_bytes] = '\0';
1597 check_for_d_option_error(data);
1599 first_message = 0;
1601 break;
1602 case MSG_ERROR_EXIT:
1603 if (msg_bytes == 4)
1604 val = raw_read_int();
1605 else if (msg_bytes == 0)
1606 val = 0;
1607 else
1608 goto invalid_msg;
1609 iobuf.in_multiplexed = 1;
1610 if (DEBUG_GTE(EXIT, 3))
1611 rprintf(FINFO, "[%s] got MSG_ERROR_EXIT with %ld bytes\n", who_am_i(), (long)msg_bytes);
1612 if (msg_bytes == 0) {
1613 if (!am_sender && !am_generator) {
1614 if (DEBUG_GTE(EXIT, 3)) {
1615 rprintf(FINFO, "[%s] sending MSG_ERROR_EXIT (len 0)\n",
1616 who_am_i());
1618 send_msg(MSG_ERROR_EXIT, "", 0, 0);
1619 io_flush(FULL_FLUSH);
1621 } else if (protocol_version >= 31) {
1622 if (am_generator || am_receiver) {
1623 if (DEBUG_GTE(EXIT, 3)) {
1624 rprintf(FINFO, "[%s] sending MSG_ERROR_EXIT with exit_code %d\n",
1625 who_am_i(), val);
1627 send_msg_int(MSG_ERROR_EXIT, val);
1628 } else {
1629 if (DEBUG_GTE(EXIT, 3)) {
1630 rprintf(FINFO, "[%s] sending MSG_ERROR_EXIT (len 0)\n",
1631 who_am_i());
1633 send_msg(MSG_ERROR_EXIT, "", 0, 0);
1636 /* Send a negative linenum so that we don't end up
1637 * with a duplicate exit message. */
1638 _exit_cleanup(val, __FILE__, 0 - __LINE__);
1639 default:
1640 rprintf(FERROR, "unexpected tag %d [%s%s]\n",
1641 tag, who_am_i(), inc_recurse ? "/inc" : "");
1642 exit_cleanup(RERR_STREAMIO);
1645 assert(iobuf.in_multiplexed > 0);
1648 static void drain_multiplex_messages(void)
1650 while (IN_MULTIPLEXED_AND_READY && iobuf.in.len) {
1651 if (iobuf.raw_input_ends_before) {
1652 size_t raw_len = iobuf.raw_input_ends_before - iobuf.in.pos;
1653 iobuf.raw_input_ends_before = 0;
1654 if (raw_len >= iobuf.in.len) {
1655 iobuf.in.len = 0;
1656 break;
1658 iobuf.in.len -= raw_len;
1659 if ((iobuf.in.pos += raw_len) >= iobuf.in.size)
1660 iobuf.in.pos -= iobuf.in.size;
1662 read_a_msg();
1666 void wait_for_receiver(void)
1668 if (!iobuf.raw_input_ends_before)
1669 read_a_msg();
1671 if (iobuf.raw_input_ends_before) {
1672 int ndx = read_int(iobuf.in_fd);
1673 if (ndx < 0) {
1674 switch (ndx) {
1675 case NDX_FLIST_EOF:
1676 flist_eof = 1;
1677 if (DEBUG_GTE(FLIST, 3))
1678 rprintf(FINFO, "[%s] flist_eof=1\n", who_am_i());
1679 break;
1680 case NDX_DONE:
1681 msgdone_cnt++;
1682 break;
1683 default:
1684 exit_cleanup(RERR_STREAMIO);
1686 } else {
1687 struct file_list *flist;
1688 flist_receiving_enabled = False;
1689 if (DEBUG_GTE(FLIST, 2)) {
1690 rprintf(FINFO, "[%s] receiving flist for dir %d\n",
1691 who_am_i(), ndx);
1693 flist = recv_file_list(iobuf.in_fd, ndx);
1694 flist->parent_ndx = ndx;
1695 #ifdef SUPPORT_HARD_LINKS
1696 if (preserve_hard_links)
1697 match_hard_links(flist);
1698 #endif
1699 flist_receiving_enabled = True;
1704 unsigned short read_shortint(int f)
1706 char b[2];
1707 read_buf(f, b, 2);
1708 return (UVAL(b, 1) << 8) + UVAL(b, 0);
1711 int32 read_int(int f)
1713 char b[4];
1714 int32 num;
1716 read_buf(f, b, 4);
1717 num = IVAL(b, 0);
1718 #if SIZEOF_INT32 > 4
1719 if (num & (int32)0x80000000)
1720 num |= ~(int32)0xffffffff;
1721 #endif
1722 return num;
1725 int32 read_varint(int f)
1727 union {
1728 char b[5];
1729 int32 x;
1730 } u;
1731 uchar ch;
1732 int extra;
1734 u.x = 0;
1735 ch = read_byte(f);
1736 extra = int_byte_extra[ch / 4];
1737 if (extra) {
1738 uchar bit = ((uchar)1<<(8-extra));
1739 if (extra >= (int)sizeof u.b) {
1740 rprintf(FERROR, "Overflow in read_varint()\n");
1741 exit_cleanup(RERR_STREAMIO);
1743 read_buf(f, u.b, extra);
1744 u.b[extra] = ch & (bit-1);
1745 } else
1746 u.b[0] = ch;
1747 #if CAREFUL_ALIGNMENT
1748 u.x = IVAL(u.b,0);
1749 #endif
1750 #if SIZEOF_INT32 > 4
1751 if (u.x & (int32)0x80000000)
1752 u.x |= ~(int32)0xffffffff;
1753 #endif
1754 return u.x;
1757 int64 read_varlong(int f, uchar min_bytes)
1759 union {
1760 char b[9];
1761 int64 x;
1762 } u;
1763 char b2[8];
1764 int extra;
1766 #if SIZEOF_INT64 < 8
1767 memset(u.b, 0, 8);
1768 #else
1769 u.x = 0;
1770 #endif
1771 read_buf(f, b2, min_bytes);
1772 memcpy(u.b, b2+1, min_bytes-1);
1773 extra = int_byte_extra[CVAL(b2, 0) / 4];
1774 if (extra) {
1775 uchar bit = ((uchar)1<<(8-extra));
1776 if (min_bytes + extra > (int)sizeof u.b) {
1777 rprintf(FERROR, "Overflow in read_varlong()\n");
1778 exit_cleanup(RERR_STREAMIO);
1780 read_buf(f, u.b + min_bytes - 1, extra);
1781 u.b[min_bytes + extra - 1] = CVAL(b2, 0) & (bit-1);
1782 #if SIZEOF_INT64 < 8
1783 if (min_bytes + extra > 5 || u.b[4] || CVAL(u.b,3) & 0x80) {
1784 rprintf(FERROR, "Integer overflow: attempted 64-bit offset\n");
1785 exit_cleanup(RERR_UNSUPPORTED);
1787 #endif
1788 } else
1789 u.b[min_bytes + extra - 1] = CVAL(b2, 0);
1790 #if SIZEOF_INT64 < 8
1791 u.x = IVAL(u.b,0);
1792 #elif CAREFUL_ALIGNMENT
1793 u.x = IVAL64(u.b,0);
1794 #endif
1795 return u.x;
1798 int64 read_longint(int f)
1800 #if SIZEOF_INT64 >= 8
1801 char b[9];
1802 #endif
1803 int32 num = read_int(f);
1805 if (num != (int32)0xffffffff)
1806 return num;
1808 #if SIZEOF_INT64 < 8
1809 rprintf(FERROR, "Integer overflow: attempted 64-bit offset\n");
1810 exit_cleanup(RERR_UNSUPPORTED);
1811 #else
1812 read_buf(f, b, 8);
1813 return IVAL(b,0) | (((int64)IVAL(b,4))<<32);
1814 #endif
1817 void read_buf(int f, char *buf, size_t len)
1819 if (f != iobuf.in_fd) {
1820 if (safe_read(f, buf, len) != len)
1821 whine_about_eof(False); /* Doesn't return. */
1822 goto batch_copy;
1825 if (!IN_MULTIPLEXED) {
1826 raw_read_buf(buf, len);
1827 total_data_read += len;
1828 if (forward_flist_data)
1829 write_buf(iobuf.out_fd, buf, len);
1830 batch_copy:
1831 if (f == write_batch_monitor_in)
1832 safe_write(batch_fd, buf, len);
1833 return;
1836 while (1) {
1837 size_t siz;
1839 while (!iobuf.raw_input_ends_before)
1840 read_a_msg();
1842 siz = MIN(len, iobuf.raw_input_ends_before - iobuf.in.pos);
1843 if (siz >= iobuf.in.size)
1844 siz = iobuf.in.size;
1845 raw_read_buf(buf, siz);
1846 total_data_read += siz;
1848 if (forward_flist_data)
1849 write_buf(iobuf.out_fd, buf, siz);
1851 if (f == write_batch_monitor_in)
1852 safe_write(batch_fd, buf, siz);
1854 if ((len -= siz) == 0)
1855 break;
1856 buf += siz;
1860 void read_sbuf(int f, char *buf, size_t len)
1862 read_buf(f, buf, len);
1863 buf[len] = '\0';
1866 uchar read_byte(int f)
1868 uchar c;
1869 read_buf(f, (char*)&c, 1);
1870 return c;
1873 int read_vstring(int f, char *buf, int bufsize)
1875 int len = read_byte(f);
1877 if (len & 0x80)
1878 len = (len & ~0x80) * 0x100 + read_byte(f);
1880 if (len >= bufsize) {
1881 rprintf(FERROR, "over-long vstring received (%d > %d)\n",
1882 len, bufsize - 1);
1883 return -1;
1886 if (len)
1887 read_buf(f, buf, len);
1888 buf[len] = '\0';
1889 return len;
1892 /* Populate a sum_struct with values from the socket. This is
1893 * called by both the sender and the receiver. */
1894 void read_sum_head(int f, struct sum_struct *sum)
1896 int32 max_blength = protocol_version < 30 ? OLD_MAX_BLOCK_SIZE : MAX_BLOCK_SIZE;
1897 sum->count = read_int(f);
1898 if (sum->count < 0) {
1899 rprintf(FERROR, "Invalid checksum count %ld [%s]\n",
1900 (long)sum->count, who_am_i());
1901 exit_cleanup(RERR_PROTOCOL);
1903 sum->blength = read_int(f);
1904 if (sum->blength < 0 || sum->blength > max_blength) {
1905 rprintf(FERROR, "Invalid block length %ld [%s]\n",
1906 (long)sum->blength, who_am_i());
1907 exit_cleanup(RERR_PROTOCOL);
1909 sum->s2length = protocol_version < 27 ? csum_length : (int)read_int(f);
1910 if (sum->s2length < 0 || sum->s2length > MAX_DIGEST_LEN) {
1911 rprintf(FERROR, "Invalid checksum length %d [%s]\n",
1912 sum->s2length, who_am_i());
1913 exit_cleanup(RERR_PROTOCOL);
1915 sum->remainder = read_int(f);
1916 if (sum->remainder < 0 || sum->remainder > sum->blength) {
1917 rprintf(FERROR, "Invalid remainder length %ld [%s]\n",
1918 (long)sum->remainder, who_am_i());
1919 exit_cleanup(RERR_PROTOCOL);
1923 /* Send the values from a sum_struct over the socket. Set sum to
1924 * NULL if there are no checksums to send. This is called by both
1925 * the generator and the sender. */
1926 void write_sum_head(int f, struct sum_struct *sum)
1928 static struct sum_struct null_sum;
1930 if (sum == NULL)
1931 sum = &null_sum;
1933 write_int(f, sum->count);
1934 write_int(f, sum->blength);
1935 if (protocol_version >= 27)
1936 write_int(f, sum->s2length);
1937 write_int(f, sum->remainder);
1940 /* Sleep after writing to limit I/O bandwidth usage.
1942 * @todo Rather than sleeping after each write, it might be better to
1943 * use some kind of averaging. The current algorithm seems to always
1944 * use a bit less bandwidth than specified, because it doesn't make up
1945 * for slow periods. But arguably this is a feature. In addition, we
1946 * ought to take the time used to write the data into account.
1948 * During some phases of big transfers (file FOO is uptodate) this is
1949 * called with a small bytes_written every time. As the kernel has to
1950 * round small waits up to guarantee that we actually wait at least the
1951 * requested number of microseconds, this can become grossly inaccurate.
1952 * We therefore keep track of the bytes we've written over time and only
1953 * sleep when the accumulated delay is at least 1 tenth of a second. */
1954 static void sleep_for_bwlimit(int bytes_written)
1956 static struct timeval prior_tv;
1957 static long total_written = 0;
1958 struct timeval tv, start_tv;
1959 long elapsed_usec, sleep_usec;
1961 #define ONE_SEC 1000000L /* # of microseconds in a second */
1963 total_written += bytes_written;
1965 gettimeofday(&start_tv, NULL);
1966 if (prior_tv.tv_sec) {
1967 elapsed_usec = (start_tv.tv_sec - prior_tv.tv_sec) * ONE_SEC
1968 + (start_tv.tv_usec - prior_tv.tv_usec);
1969 total_written -= (int64)elapsed_usec * bwlimit / (ONE_SEC/1024);
1970 if (total_written < 0)
1971 total_written = 0;
1974 sleep_usec = total_written * (ONE_SEC/1024) / bwlimit;
1975 if (sleep_usec < ONE_SEC / 10) {
1976 prior_tv = start_tv;
1977 return;
1980 tv.tv_sec = sleep_usec / ONE_SEC;
1981 tv.tv_usec = sleep_usec % ONE_SEC;
1982 select(0, NULL, NULL, NULL, &tv);
1984 gettimeofday(&prior_tv, NULL);
1985 elapsed_usec = (prior_tv.tv_sec - start_tv.tv_sec) * ONE_SEC
1986 + (prior_tv.tv_usec - start_tv.tv_usec);
1987 total_written = (sleep_usec - elapsed_usec) * bwlimit / (ONE_SEC/1024);
1990 void io_flush(int flush_type)
1992 if (iobuf.out.len > iobuf.out_empty_len) {
1993 if (flush_type == FULL_FLUSH) /* flush everything in the output buffers */
1994 perform_io(iobuf.out.size - iobuf.out_empty_len, PIO_NEED_OUTROOM);
1995 else if (flush_type == NORMAL_FLUSH) /* flush at least 1 byte */
1996 perform_io(iobuf.out.size - iobuf.out.len + 1, PIO_NEED_OUTROOM);
1997 /* MSG_FLUSH: flush iobuf.msg only */
1999 if (iobuf.msg.len)
2000 perform_io(iobuf.msg.size, PIO_NEED_MSGROOM);
2003 void write_shortint(int f, unsigned short x)
2005 char b[2];
2006 b[0] = (char)x;
2007 b[1] = (char)(x >> 8);
2008 write_buf(f, b, 2);
2011 void write_int(int f, int32 x)
2013 char b[4];
2014 SIVAL(b, 0, x);
2015 write_buf(f, b, 4);
2018 void write_varint(int f, int32 x)
2020 char b[5];
2021 uchar bit;
2022 int cnt;
2024 SIVAL(b, 1, x);
2026 for (cnt = 4; cnt > 1 && b[cnt] == 0; cnt--) {}
2027 bit = ((uchar)1<<(7-cnt+1));
2029 if (CVAL(b, cnt) >= bit) {
2030 cnt++;
2031 *b = ~(bit-1);
2032 } else if (cnt > 1)
2033 *b = b[cnt] | ~(bit*2-1);
2034 else
2035 *b = b[1];
2037 write_buf(f, b, cnt);
2040 void write_varlong(int f, int64 x, uchar min_bytes)
2042 char b[9];
2043 uchar bit;
2044 int cnt = 8;
2046 #if SIZEOF_INT64 >= 8
2047 SIVAL64(b, 1, x);
2048 #else
2049 SIVAL(b, 1, x);
2050 if (x <= 0x7FFFFFFF && x >= 0)
2051 memset(b + 5, 0, 4);
2052 else {
2053 rprintf(FERROR, "Integer overflow: attempted 64-bit offset\n");
2054 exit_cleanup(RERR_UNSUPPORTED);
2056 #endif
2058 while (cnt > min_bytes && b[cnt] == 0)
2059 cnt--;
2060 bit = ((uchar)1<<(7-cnt+min_bytes));
2061 if (CVAL(b, cnt) >= bit) {
2062 cnt++;
2063 *b = ~(bit-1);
2064 } else if (cnt > min_bytes)
2065 *b = b[cnt] | ~(bit*2-1);
2066 else
2067 *b = b[cnt];
2069 write_buf(f, b, cnt);
2073 * Note: int64 may actually be a 32-bit type if ./configure couldn't find any
2074 * 64-bit types on this platform.
2076 void write_longint(int f, int64 x)
2078 char b[12], * const s = b+4;
2080 SIVAL(s, 0, x);
2081 if (x <= 0x7FFFFFFF && x >= 0) {
2082 write_buf(f, s, 4);
2083 return;
2086 #if SIZEOF_INT64 < 8
2087 rprintf(FERROR, "Integer overflow: attempted 64-bit offset\n");
2088 exit_cleanup(RERR_UNSUPPORTED);
2089 #else
2090 memset(b, 0xFF, 4);
2091 SIVAL(s, 4, x >> 32);
2092 write_buf(f, b, 12);
2093 #endif
2096 void write_bigbuf(int f, const char *buf, size_t len)
2098 size_t half_max = (iobuf.out.size - iobuf.out_empty_len) / 2;
2100 while (len > half_max + 1024) {
2101 write_buf(f, buf, half_max);
2102 buf += half_max;
2103 len -= half_max;
2106 write_buf(f, buf, len);
2109 void write_buf(int f, const char *buf, size_t len)
2111 size_t pos, siz;
2113 if (f != iobuf.out_fd) {
2114 safe_write(f, buf, len);
2115 goto batch_copy;
2118 if (iobuf.out.len + len > iobuf.out.size)
2119 perform_io(len, PIO_NEED_OUTROOM);
2121 pos = iobuf.out.pos + iobuf.out.len; /* Must be set after any flushing. */
2122 if (pos >= iobuf.out.size)
2123 pos -= iobuf.out.size;
2125 /* Handle a split copy if we wrap around the end of the circular buffer. */
2126 if (pos >= iobuf.out.pos && (siz = iobuf.out.size - pos) < len) {
2127 memcpy(iobuf.out.buf + pos, buf, siz);
2128 memcpy(iobuf.out.buf, buf + siz, len - siz);
2129 } else
2130 memcpy(iobuf.out.buf + pos, buf, len);
2132 iobuf.out.len += len;
2133 total_data_written += len;
2135 batch_copy:
2136 if (f == write_batch_monitor_out)
2137 safe_write(batch_fd, buf, len);
2140 /* Write a string to the connection */
2141 void write_sbuf(int f, const char *buf)
2143 write_buf(f, buf, strlen(buf));
2146 void write_byte(int f, uchar c)
2148 write_buf(f, (char *)&c, 1);
2151 void write_vstring(int f, const char *str, int len)
2153 uchar lenbuf[3], *lb = lenbuf;
2155 if (len > 0x7F) {
2156 if (len > 0x7FFF) {
2157 rprintf(FERROR,
2158 "attempting to send over-long vstring (%d > %d)\n",
2159 len, 0x7FFF);
2160 exit_cleanup(RERR_PROTOCOL);
2162 *lb++ = len / 0x100 + 0x80;
2164 *lb = len;
2166 write_buf(f, (char*)lenbuf, lb - lenbuf + 1);
2167 if (len)
2168 write_buf(f, str, len);
2171 /* Send a file-list index using a byte-reduction method. */
2172 void write_ndx(int f, int32 ndx)
2174 static int32 prev_positive = -1, prev_negative = 1;
2175 int32 diff, cnt = 0;
2176 char b[6];
2178 if (protocol_version < 30 || read_batch) {
2179 write_int(f, ndx);
2180 return;
2183 /* Send NDX_DONE as a single-byte 0 with no side effects. Send
2184 * negative nums as a positive after sending a leading 0xFF. */
2185 if (ndx >= 0) {
2186 diff = ndx - prev_positive;
2187 prev_positive = ndx;
2188 } else if (ndx == NDX_DONE) {
2189 *b = 0;
2190 write_buf(f, b, 1);
2191 return;
2192 } else {
2193 b[cnt++] = (char)0xFF;
2194 ndx = -ndx;
2195 diff = ndx - prev_negative;
2196 prev_negative = ndx;
2199 /* A diff of 1 - 253 is sent as a one-byte diff; a diff of 254 - 32767
2200 * or 0 is sent as a 0xFE + a two-byte diff; otherwise we send 0xFE
2201 * & all 4 bytes of the (non-negative) num with the high-bit set. */
2202 if (diff < 0xFE && diff > 0)
2203 b[cnt++] = (char)diff;
2204 else if (diff < 0 || diff > 0x7FFF) {
2205 b[cnt++] = (char)0xFE;
2206 b[cnt++] = (char)((ndx >> 24) | 0x80);
2207 b[cnt++] = (char)ndx;
2208 b[cnt++] = (char)(ndx >> 8);
2209 b[cnt++] = (char)(ndx >> 16);
2210 } else {
2211 b[cnt++] = (char)0xFE;
2212 b[cnt++] = (char)(diff >> 8);
2213 b[cnt++] = (char)diff;
2215 write_buf(f, b, cnt);
2218 /* Receive a file-list index using a byte-reduction method. */
2219 int32 read_ndx(int f)
2221 static int32 prev_positive = -1, prev_negative = 1;
2222 int32 *prev_ptr, num;
2223 char b[4];
2225 if (protocol_version < 30)
2226 return read_int(f);
2228 read_buf(f, b, 1);
2229 if (CVAL(b, 0) == 0xFF) {
2230 read_buf(f, b, 1);
2231 prev_ptr = &prev_negative;
2232 } else if (CVAL(b, 0) == 0)
2233 return NDX_DONE;
2234 else
2235 prev_ptr = &prev_positive;
2236 if (CVAL(b, 0) == 0xFE) {
2237 read_buf(f, b, 2);
2238 if (CVAL(b, 0) & 0x80) {
2239 b[3] = CVAL(b, 0) & ~0x80;
2240 b[0] = b[1];
2241 read_buf(f, b+1, 2);
2242 num = IVAL(b, 0);
2243 } else
2244 num = (UVAL(b,0)<<8) + UVAL(b,1) + *prev_ptr;
2245 } else
2246 num = UVAL(b, 0) + *prev_ptr;
2247 *prev_ptr = num;
2248 if (prev_ptr == &prev_negative)
2249 num = -num;
2250 return num;
2253 /* Read a line of up to bufsiz-1 characters into buf. Strips
2254 * the (required) trailing newline and all carriage returns.
2255 * Returns 1 for success; 0 for I/O error or truncation. */
2256 int read_line_old(int fd, char *buf, size_t bufsiz, int eof_ok)
2258 assert(fd != iobuf.in_fd);
2259 bufsiz--; /* leave room for the null */
2260 while (bufsiz > 0) {
2261 if (safe_read(fd, buf, 1) == 0) {
2262 if (eof_ok)
2263 break;
2264 return 0;
2266 if (*buf == '\0')
2267 return 0;
2268 if (*buf == '\n')
2269 break;
2270 if (*buf != '\r') {
2271 buf++;
2272 bufsiz--;
2275 *buf = '\0';
2276 return bufsiz > 0;
2279 void io_printf(int fd, const char *format, ...)
2281 va_list ap;
2282 char buf[BIGPATHBUFLEN];
2283 int len;
2285 va_start(ap, format);
2286 len = vsnprintf(buf, sizeof buf, format, ap);
2287 va_end(ap);
2289 if (len < 0)
2290 exit_cleanup(RERR_PROTOCOL);
2292 if (len >= (int)sizeof buf) {
2293 rprintf(FERROR, "io_printf() was too long for the buffer.\n");
2294 exit_cleanup(RERR_PROTOCOL);
2297 write_sbuf(fd, buf);
2300 /* Setup for multiplexing a MSG_* stream with the data stream. */
2301 void io_start_multiplex_out(int fd)
2303 io_flush(FULL_FLUSH);
2305 if (msgs2stderr && DEBUG_GTE(IO, 2))
2306 rprintf(FINFO, "[%s] io_start_multiplex_out(%d)\n", who_am_i(), fd);
2308 if (!iobuf.msg.buf)
2309 alloc_xbuf(&iobuf.msg, ROUND_UP_1024(IO_BUFFER_SIZE));
2311 iobuf.out_empty_len = 4; /* See also OUT_MULTIPLEXED */
2312 io_start_buffering_out(fd);
2313 got_kill_signal = 0;
2315 iobuf.raw_data_header_pos = iobuf.out.pos + iobuf.out.len;
2316 iobuf.out.len += 4;
2319 /* Setup for multiplexing a MSG_* stream with the data stream. */
2320 void io_start_multiplex_in(int fd)
2322 if (msgs2stderr && DEBUG_GTE(IO, 2))
2323 rprintf(FINFO, "[%s] io_start_multiplex_in(%d)\n", who_am_i(), fd);
2325 iobuf.in_multiplexed = 1; /* See also IN_MULTIPLEXED */
2326 io_start_buffering_in(fd);
2329 int io_end_multiplex_in(int mode)
2331 int ret = iobuf.in_multiplexed ? iobuf.in_fd : -1;
2333 if (msgs2stderr && DEBUG_GTE(IO, 2))
2334 rprintf(FINFO, "[%s] io_end_multiplex_in(mode=%d)\n", who_am_i(), mode);
2336 iobuf.in_multiplexed = 0;
2337 if (mode == MPLX_SWITCHING)
2338 iobuf.raw_input_ends_before = 0;
2339 else
2340 assert(iobuf.raw_input_ends_before == 0);
2341 if (mode != MPLX_TO_BUFFERED)
2342 io_end_buffering_in(mode);
2344 return ret;
2347 int io_end_multiplex_out(int mode)
2349 int ret = iobuf.out_empty_len ? iobuf.out_fd : -1;
2351 if (msgs2stderr && DEBUG_GTE(IO, 2))
2352 rprintf(FINFO, "[%s] io_end_multiplex_out(mode=%d)\n", who_am_i(), mode);
2354 if (mode != MPLX_TO_BUFFERED)
2355 io_end_buffering_out(mode);
2356 else
2357 io_flush(FULL_FLUSH);
2359 iobuf.out.len = 0;
2360 iobuf.out_empty_len = 0;
2361 if (got_kill_signal > 0) /* Just in case... */
2362 handle_kill_signal(False);
2363 got_kill_signal = -1;
2365 return ret;
2368 void start_write_batch(int fd)
2370 /* Some communication has already taken place, but we don't
2371 * enable batch writing until here so that we can write a
2372 * canonical record of the communication even though the
2373 * actual communication so far depends on whether a daemon
2374 * is involved. */
2375 write_int(batch_fd, protocol_version);
2376 if (protocol_version >= 30)
2377 write_varint(batch_fd, compat_flags);
2378 write_int(batch_fd, checksum_seed);
2380 if (am_sender)
2381 write_batch_monitor_out = fd;
2382 else
2383 write_batch_monitor_in = fd;
2386 void stop_write_batch(void)
2388 write_batch_monitor_out = -1;
2389 write_batch_monitor_in = -1;