selftest/skip

   1 # This file contains a list of regular expressions matching testsuites that
   2 # should be skipped during "make test".
   3 #
   4 # Possible reasons for adding a testsuite here:
   5 # * Testsuite functionality not implemented on the server side
   6 # * Testsuite crashes during run
   7 # * Testsuite crashes server
   8 # * Testsuite contains "flapping" tests (sometimes success, sometimes failure)
   9 # * Testsuite hangs indefinitely
  10 #
  11 # If a testsuite is partially succeeding, please list the failing bits
  12 # in the selftest/knownfail file rather than disabling the testsuite completely.
  13 # That way those tests that do succeed still get run and we will be notified
  14 # if a known failing test suddenly starts succeeding.
  15 #
  16 # If a testsuite is very slow, please add it to selftest/slow instead.
  17 # This way it will still get run in "make slowtest"
  18 #
  19 # Please add a comment for each testsuite you disable explaining why
  20 # it is being skipped.
  21 ^samba3.smbtorture_s3.*.randomipc
  22 ^samba3.smbtorture_s3.*.negnowait
  23 ^samba3.smbtorture_s3.*.nbench
  24 ^samba3.smbtorture_s3.*.errmapextract
  25 ^samba3.smbtorture_s3.*.trans2scan
  26 ^samba3.smbtorture_s3.*.nttransscan
  27 ^samba3.smbtorture_s3.*.deny1
  28 ^samba3.smbtorture_s3.*.deny2
  29 ^samba3.smbtorture_s3.*.openattr
  30 ^samba3.smbtorture_s3.*.casetable
  31 ^samba3.smbtorture_s3.*.eatest
  32 ^samba3.smbtorture_s3.*.mangle
  33 ^samba3.smbtorture_s3.*.utable
  34 ^samba3.smbtorture_s3.*.pipe_number
  35 ^samba3.smbtorture_s3.LOCAL-DBTRANS #hangs for some reason
  36 ^samba3.smbtorture_s3.*.DIR1 #loops on 64 bit linux with ext4
  37 ^samba3.smbtorture_s3.plain.LOCK9.*\(ad_dc_ntvfs\) # Fails against the s4 ntvfs server
  38 ^samba3.smbtorture_s3.plain.OPLOCK2\(ad_dc_ntvfs\) # Fails against the s4 ntvfs server
  39 ^samba3.smbtorture_s3.plain.STREAMERROR\(ad_dc_ntvfs\) # Fails against the s4 ntvfs server
  40 ^samba3.smbtorture_s3.plain.DIR1\(ad_dc_ntvfs\) # Fails against the s4 ntvfs server
  41 ^samba3.smbtorture_s3.plain.DIR-CREATETIME\(ad_dc_ntvfs\) # Fails against the s4 ntvfs server
  42 ^samba3.smbtorture_s3.plain.DELETE-LN\(ad_dc_ntvfs\) # Fails against the s4 ntvfs server
  43 ^samba3.smbtorture_s3.plain.UID-REGRESSION-TEST\(ad_dc_ntvfs\) # Fails against the s4 ntvfs server
  44 ^samba3.smbtorture_s3.plain.SHORTNAME-TEST\(ad_dc_ntvfs\) # Fails against the s4 ntvfs server
  45 ^samba3.smbtorture_s3.plain.RENAME-ACCESS\(ad_dc_ntvfs\) # Fails against the s4 ntvfs server
  46 ^samba3.smbtorture_s3.plain.OWNER-RIGHTS\(ad_dc_ntvfs\) # Don't test against the s4 ntvfs server anymore
  47 ^samba3.smbtorture_s3.plain.PIDHIGH\(ad_dc_ntvfs\) # Fails against the s4 ntvfs server
  48 ^samba3.smbtorture_s3.plain.NTTRANS-FSCTL\(ad_dc_ntvfs\) # Fails against the s4 ntvfs server
  49 ^samba3.smbtorture_s3.plain.SMB2-NEGPROT\(ad_dc_ntvfs\) # Fails against the s4 ntvfs server
  50 ^samba3.smbtorture_s3.plain.BAD-NBT-SESSION\(ad_dc_ntvfs\) # Fails against the s4 ntvfs server
  51 ^samba3.smbtorture_s3.plain.SMB2-SESSION-REAUTH\(ad_dc_ntvfs\) # Fails against the s4 ntvfs server
  52 ^samba3.smbtorture_s3.plain.SMB2-SESSION-RECONNECT\(ad_dc_ntvfs\) # Fails against the s4 ntvfs server
  53 ^samba3.smbtorture_s3.plain.SMB1-WILD-MANGLE-UNLINK\(ad_dc_ntvfs\) # Fails against the s4 ntvfs server
  54 ^samba3.smbtorture_s3.plain.SMB1-WILD-MANGLE-RENAME\(ad_dc_ntvfs\) # Fails against the s4 ntvfs server
  55 ^samba3.*base.charset
  56 ^samba3.*raw.context
  57 ^samba3.*raw.ioctl
  58 ^samba3.*raw.qfileinfo
  59 ^samba3.*raw.qfsinfo
  60 ^samba3.*raw.sfileinfo.base
  61 ^samba3.smb2.hold-oplock                # Not a test, but a way to block other clients for a test
  62 ^samba3.smb2.hold-sharemode             # Not a test, but a way to block other clients for a test
  63 ^samba3.smb2.check-sharemode            # Not a test, but a way to test sharemodes outside of Samba
  64 ^samba3.smb2.set-sparse-ioctl           # For manual testing, needs additional parameters.
  65 ^samba3.smb2.zero-data-ioctl            # For manual testing, needs additional parameters.
  66 ^samba3.smb2.durable-open-disconnect    # Not a test, but a way to create a disconnected durable
  67 ^samba3.smb2.scan                       # No tests
  68 ^samba3.smb2.oplock.levelii501          # No test yet
  69 ^samba3.smb2.timestamp_resolution       # See the comment on the test
  70 ^samba4.smb2.timestamp_resolution
  71 ^samba3.rpc.samr.passwords.lockout\(ad_dc\) # No point running this version, it just waits 12 times longer the samba4 version of this test, covering the same code
  72 ^samba4.base.iometer
  73 ^samba4.base.casetable
  74 ^samba4.base.nttrans
  75 ^samba4.base.scan.maxfid
  76 ^samba4.raw.eas
  77 ^samba4.raw.hold-oplock                 # Not a test, but a way to block other clients for a test
  78 ^samba4.smb2.hold-oplock                # Not a test, but a way to block other clients for a test
  79 ^samba4.smb2.hold-sharemode             # Not a test, but a way to block other clients for a test
  80 ^samba4.smb2.check-sharemode            # Not a test, but a way to test sharemodes outside of Samba
  81 ^samba4.smb2.set-sparse-ioctl           # For manual testing, needs additional parameters.
  82 ^samba4.smb2.zero-data-ioctl            # For manual testing, needs additional parameters.
  83 ^samba4.raw.ping.pong           # Needs second server to test
  84 ^samba4.rpc.samr.accessmask
  85 ^samba4.raw.scan.eamax
  86 ^samba4.smb2.samba3misc
  87 ^samba4.smb2.notify
  88 ^samba4.smb2.scan
  89 ^samba4.smb2.lease
  90 ^samba4.smb2.durable-open
  91 ^samba4.smb2.durable-v2-open
  92 ^samba4.smb2.dir
  93 ^samba4.smb2.session
  94 ^samba4.smb2.compound
  95 ^samba4.smb2.multichannel
  96 ^samba4.smb2.oplock.levelii501          # No test yet
  97 # SMB2 in s4 does not seem to support rename correctly
  98 ^samba4.smb2.rename.*\(ad_dc_ntvfs\)$
  99 # some operations don't work over the CIFS NTVFS backend yet (eg. root_fid)
 100 ^samba4.ntvfs.cifs.*.base.createx_sharemodes_dir
 101 ^samba4.ntvfs.cifs.*.base.charset
 102 ^samba4.ntvfs.cifs.*.base.iometer
 103 ^samba4.ntvfs.cifs.*.base.casetable
 104 ^samba4.ntvfs.cifs.*.base.nttrans
 105 ^samba4.ntvfs.cifs.*.base.scan-maxfid
 106 ^samba4.ntvfs.cifs.*.base.utable
 107 ^samba4.ntvfs.cifs.*.base.smb
 108 ^samba4.ntvfs.cifs.*.raw.
 109 ^samba4.rpc.samsync
 110 ^samba4.rpc.eventlog                                            # Not provided by Samba 4
 111 ^samba4.rpc.initshutdown                                        # Not provided by Samba 4
 112 ^samba4.rpc.spoolss                                             # Not provided by Samba 4
 113 ^samba4.rpc.svcctl                                                      # Not provided by Samba 4
 114 ^samba4.rpc.atsvc                                                       # Not provided by Samba 4
 115 ^samba4.rpc.frsapi                                                      # Not provided by Samba 4
 116 ^samba4.rpc.ntsvcs                                                      # Not provided by Samba 4
 117 ^samba4.rpc.dfs                                                         # Not provided by Samba 4
 118 ^samba4.rpc.witness                                                     # Not provided by Samba 4
 119 ^samba4.rpc.clusapi                                                     # clusapi server support not yet provided
 120 ^samba4.rpc.iremotewinspool.*\(ad_dc_default\)$                         # Not provided by Samba 4
 121 ^samba4.*.base.samba3.*                                         # Samba3-specific test
 122 ^samba4.*.raw.samba3.*                                          # Samba3-specific test
 123 ^samba4.rpc..*samba3.*                                          # Samba3-specific test
 124 ^samba4.raw.offline                     # Samba 4 doesn't have much offline support yet
 125 ^samba4.rpc.countcalls # this is not useful now we have full IDL
 126 ^samba4.rap.basic
 127 ^samba4.rap.scan # same thing here - we have docs now
 128 ^samba4.rap.printing # Not provided by Samba 4
 129 ^samba4.rap.rpc
 130 ^samba4.rap.sam # Not provided by Samba 4
 131 bench # don't run benchmarks in our selftest
 132 ^samba4..*trans2.scan # uses huge number of file descriptors
 133 ^samba4.*.base.scan.ioctl # bad idea in make test
 134 ^samba4.*.base.scan.pipe_number # bad idea in make test
 135 ^samba4.*.base.secleak # no point on build farm
 136 ^samba4.*.base.delaywrite # This is randomly failing, depending on timing and filesystem features
 137 ^samba4.*.base.winattr
 138 ^samba4.*.base.birthtime
 139 ^samba4.*base.defer_open
 140 ^samba4.smb2.acls # new test which doesn't pass yet
 141 ^samba4.smb2.sdread
 142 # ktutil might not be installed or from mit...
 143 # we should build a samba4ktutil and use that instead
 144 ^samba4.blackbox.ktpass # this test isn't portable ...
 145 ^samba.tests.dcerpc.unix  # This contains a server-side getpwuid call which hangs the server when nss_winbindd is in use
 146 ^samba4.smb2.mangle.*\(ad_dc_ntvfs\)$ # Ignore ad_dc_ntvfs since this is a new test
 147 ^samba4.smb2.tcon.*\(ad_dc_ntvfs\)$ # Ignore ad_dc_ntvfs since this is a new test
 148 ^samba4.smb2.mkdir.*\(ad_dc_ntvfs\)$ # Ignore ad_dc_ntvfs since this is a new test
 149 ^samba3.blackbox.open-eintr.*
 150 smb2.durable-v2-regressions # Only used in blackbox tests