sdcc/support/sdbinutils/include/opcode/ppc.h

   1 /* ppc.h -- Header file for PowerPC opcode table
   2    Copyright (C) 1994-2022 Free Software Foundation, Inc.
   3    Written by Ian Lance Taylor, Cygnus Support
   4
   5    This file is part of GDB, GAS, and the GNU binutils.
   6
   7    GDB, GAS, and the GNU binutils are free software; you can redistribute
   8    them and/or modify them under the terms of the GNU General Public
   9    License as published by the Free Software Foundation; either version 3,
  10    or (at your option) any later version.
  11
  12    GDB, GAS, and the GNU binutils are distributed in the hope that they
  13    will be useful, but WITHOUT ANY WARRANTY; without even the implied
  14    warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
  15    the GNU General Public License for more details.
  16
  17    You should have received a copy of the GNU General Public License
  18    along with this file; see the file COPYING3.  If not, write to the Free
  19    Software Foundation, 51 Franklin Street - Fifth Floor, Boston,
  20    MA 02110-1301, USA.  */
  21
  22 #ifndef PPC_H
  23 #define PPC_H
  24
  25 #include <stdint.h>
  26
  27 #ifdef __cplusplus
  28 extern "C" {
  29 #endif
  30
  31 typedef uint64_t ppc_cpu_t;
  32
  33 /* The opcode table is an array of struct powerpc_opcode.  */
  34
  35 struct powerpc_opcode
  36 {
  37   /* The opcode name.  */
  38   const char *name;
  39
  40   /* The opcode itself.  Those bits which will be filled in with
  41      operands are zeroes.  */
  42   uint64_t opcode;
  43
  44   /* The opcode mask.  This is used by the disassembler.  This is a
  45      mask containing ones indicating those bits which must match the
  46      opcode field, and zeroes indicating those bits which need not
  47      match (and are presumably filled in by operands).  */
  48   uint64_t mask;
  49
  50   /* One bit flags for the opcode.  These are used to indicate which
  51      specific processors support the instructions.  The defined values
  52      are listed below.  */
  53   ppc_cpu_t flags;
  54
  55   /* One bit flags for the opcode.  These are used to indicate which
  56      specific processors no longer support the instructions.  The defined
  57      values are listed below.  */
  58   ppc_cpu_t deprecated;
  59
  60   /* An array of operand codes.  Each code is an index into the
  61      operand table.  They appear in the order which the operands must
  62      appear in assembly code, and are terminated by a zero.  */
  63   unsigned char operands[8];
  64 };
  65
  66 /* The table itself is sorted by major opcode number, and is otherwise
  67    in the order in which the disassembler should consider
  68    instructions.  */
  69 extern const struct powerpc_opcode powerpc_opcodes[];
  70 extern const unsigned int powerpc_num_opcodes;
  71 extern const struct powerpc_opcode prefix_opcodes[];
  72 extern const unsigned int prefix_num_opcodes;
  73 extern const struct powerpc_opcode vle_opcodes[];
  74 extern const unsigned int vle_num_opcodes;
  75 extern const struct powerpc_opcode spe2_opcodes[];
  76 extern const unsigned int spe2_num_opcodes;
  77
  78 /* Values defined for the flags field of a struct powerpc_opcode.  */
  79
  80 /* Opcode is defined for the PowerPC architecture.  */
  81 #define PPC_OPCODE_PPC                 0x1ull
  82
  83 /* Opcode is defined for the POWER (RS/6000) architecture.  */
  84 #define PPC_OPCODE_POWER               0x2ull
  85
  86 /* Opcode is defined for the POWER2 (Rios 2) architecture.  */
  87 #define PPC_OPCODE_POWER2              0x4ull
  88
  89 /* Opcode is only defined on 64 bit architectures.  */
  90 #define PPC_OPCODE_64                  0x8ull
  91
  92 /* Opcode is supported by the Motorola PowerPC 601 processor.  The 601
  93    is assumed to support all PowerPC (PPC_OPCODE_PPC) instructions,
  94    but it also supports many additional POWER instructions.  */
  95 #define PPC_OPCODE_601                0x10ull
  96
  97 /* Opcode is supported in both the Power and PowerPC architectures
  98    (ie, compiler's -mcpu=common or assembler's -mcom).  More than just
  99    the intersection of PPC_OPCODE_PPC with the union of PPC_OPCODE_POWER
 100    and PPC_OPCODE_POWER2 because many instructions changed mnemonics
 101    between POWER and POWERPC.  */
 102 #define PPC_OPCODE_COMMON             0x20ull
 103
 104 /* Opcode is supported for any Power or PowerPC platform (this is
 105    for the assembler's -many option, and it eliminates duplicates).  */
 106 #define PPC_OPCODE_ANY                0x40ull
 107
 108 /* Opcode is supported as part of the 64-bit bridge.  */
 109 #define PPC_OPCODE_64_BRIDGE          0x80ull
 110
 111 /* Opcode is supported by Altivec Vector Unit */
 112 #define PPC_OPCODE_ALTIVEC           0x100ull
 113
 114 /* Opcode is supported by PowerPC 403 processor.  */
 115 #define PPC_OPCODE_403               0x200ull
 116
 117 /* Opcode is supported by PowerPC BookE processor.  */
 118 #define PPC_OPCODE_BOOKE             0x400ull
 119
 120 /* Opcode is only supported by Power4 architecture.  */
 121 #define PPC_OPCODE_POWER4            0x800ull
 122
 123 /* Opcode is only supported by e500x2 Core.
 124    This bit, PPC_OPCODE_EFS, PPC_OPCODE_VLE, and all those with APU in
 125    their comment mark opcodes so that when those instructions are used
 126    an APUinfo entry can be generated.  */
 127 #define PPC_OPCODE_SPE              0x1000ull
 128
 129 /* Opcode is supported by Integer select APU.  */
 130 #define PPC_OPCODE_ISEL             0x2000ull
 131
 132 /* Opcode is an e500 SPE floating point instruction.  */
 133 #define PPC_OPCODE_EFS              0x4000ull
 134
 135 /* Opcode is supported by branch locking APU.  */
 136 #define PPC_OPCODE_BRLOCK           0x8000ull
 137
 138 /* Opcode is supported by performance monitor APU.  */
 139 #define PPC_OPCODE_PMR             0x10000ull
 140
 141 /* Opcode is supported by cache locking APU.  */
 142 #define PPC_OPCODE_CACHELCK        0x20000ull
 143
 144 /* Opcode is supported by machine check APU.  */
 145 #define PPC_OPCODE_RFMCI           0x40000ull
 146
 147 /* Opcode is supported by PowerPC 440 processor.  */
 148 #define PPC_OPCODE_440             0x80000ull
 149
 150 /* Opcode is only supported by Power5 architecture.  */
 151 #define PPC_OPCODE_POWER5         0x100000ull
 152
 153 /* Opcode is supported by PowerPC e300 family.  */
 154 #define PPC_OPCODE_E300           0x200000ull
 155
 156 /* Opcode is only supported by Power6 architecture.  */
 157 #define PPC_OPCODE_POWER6         0x400000ull
 158
 159 /* Opcode is only supported by PowerPC Cell family.  */
 160 #define PPC_OPCODE_CELL           0x800000ull
 161
 162 /* Opcode is supported by CPUs with paired singles support.  */
 163 #define PPC_OPCODE_PPCPS         0x1000000ull
 164
 165 /* Opcode is supported by Power E500MC */
 166 #define PPC_OPCODE_E500MC        0x2000000ull
 167
 168 /* Opcode is supported by PowerPC 405 processor.  */
 169 #define PPC_OPCODE_405           0x4000000ull
 170
 171 /* Opcode is supported by Vector-Scalar (VSX) Unit */
 172 #define PPC_OPCODE_VSX           0x8000000ull
 173
 174 /* Opcode is only supported by Power7 architecture.  */
 175 #define PPC_OPCODE_POWER7       0x10000000ull
 176
 177 /* Opcode is supported by A2.  */
 178 #define PPC_OPCODE_A2           0x20000000ull
 179
 180 /* Opcode is supported by PowerPC 476 processor.  */
 181 #define PPC_OPCODE_476          0x40000000ull
 182
 183 /* Opcode is supported by AppliedMicro Titan core */
 184 #define PPC_OPCODE_TITAN        0x80000000ull
 185
 186 /* Opcode which is supported by the e500 family */
 187 #define PPC_OPCODE_E500        0x100000000ull
 188
 189 /* Opcode is supported by Power E6500 */
 190 #define PPC_OPCODE_E6500       0x200000000ull
 191
 192 /* Opcode is supported by Thread management APU */
 193 #define PPC_OPCODE_TMR         0x400000000ull
 194
 195 /* Opcode which is supported by the VLE extension.  */
 196 #define PPC_OPCODE_VLE         0x800000000ull
 197
 198 /* Opcode is only supported by Power8 architecture.  */
 199 #define PPC_OPCODE_POWER8     0x1000000000ull
 200
 201 /* Opcode is supported by ppc750cl/Gekko/Broadway.  */
 202 #define PPC_OPCODE_750        0x2000000000ull
 203
 204 /* Opcode is supported by ppc7450.  */
 205 #define PPC_OPCODE_7450       0x4000000000ull
 206
 207 /* Opcode is supported by ppc821/850/860.  */
 208 #define PPC_OPCODE_860        0x8000000000ull
 209
 210 /* Opcode is only supported by Power9 architecture.  */
 211 #define PPC_OPCODE_POWER9    0x10000000000ull
 212
 213 /* Opcode is supported by e200z4.  */
 214 #define PPC_OPCODE_E200Z4    0x20000000000ull
 215
 216 /* Disassemble to instructions matching later in the opcode table
 217    with fewer "mask" bits set rather than the earlist match.  Fewer
 218    "mask" bits set imply a more general form of the opcode, in fact
 219    the underlying machine instruction.  */
 220 #define PPC_OPCODE_RAW       0x40000000000ull
 221
 222 /* Opcode is supported by PowerPC LSP */
 223 #define PPC_OPCODE_LSP       0x80000000000ull
 224
 225 /* Opcode is only supported by Freescale SPE2 APU.  */
 226 #define PPC_OPCODE_SPE2     0x100000000000ull
 227
 228 /* Opcode is supported by EFS2.  */
 229 #define PPC_OPCODE_EFS2     0x200000000000ull
 230
 231 /* Opcode is only supported by power10 architecture.  */
 232 #define PPC_OPCODE_POWER10  0x400000000000ull
 233
 234 /* A macro to extract the major opcode from an instruction.  */
 235 #define PPC_OP(i) (((i) >> 26) & 0x3f)
 236
 237 /* A macro to determine if the instruction is a 2-byte VLE insn.  */
 238 #define PPC_OP_SE_VLE(m) ((m) <= 0xffff)
 239
 240 /* A macro to extract the major opcode from a VLE instruction.  */
 241 #define VLE_OP(i,m) (((i) >> ((m) <= 0xffff ? 10 : 26)) & 0x3f)
 242
 243 /* A macro to convert a VLE opcode to a VLE opcode segment.  */
 244 #define VLE_OP_TO_SEG(i) ((i) >> 1)
 245
 246 /* A macro to extract the extended opcode from a SPE2 instruction.  */
 247 #define SPE2_XOP(i) ((i) & 0x7ff)
 248
 249 /* A macro to convert a SPE2 extended opcode to a SPE2 xopcode segment.  */
 250 #define SPE2_XOP_TO_SEG(i) ((i) >> 7)
 251
 252 /* A macro to extract the prefix word from an 8-byte PREFIX instruction.  */
 253 #define PPC_GET_PREFIX(i) (((i) >> 32) & ((1LL << 32) - 1))
 254
 255 /* A macro to extract the suffix word from an 8-byte PREFIX instruction.  */
 256 #define PPC_GET_SUFFIX(i) ((i) & ((1LL << 32) - 1))
 257
 258 /* A macro to determine whether insn I is an 8-byte prefix instruction.  */
 259 #define PPC_PREFIX_P(i) (PPC_OP (PPC_GET_PREFIX (i)) == 0x1)
 260
 261 /* A macro used to hash 8-byte PREFIX instructions.  */
 262 #define PPC_PREFIX_SEG(i) (PPC_OP (i) >> 1)
 263
 264 \f
 265 /* The operands table is an array of struct powerpc_operand.  */
 266
 267 struct powerpc_operand
 268 {
 269   /* A bitmask of bits in the operand.  */
 270   uint64_t bitm;
 271
 272   /* The shift operation to be applied to the operand.  No shift
 273      is made if this is zero.  For positive values, the operand
 274      is shifted left by SHIFT.  For negative values, the operand
 275      is shifted right by -SHIFT.  Use PPC_OPSHIFT_INV to indicate
 276      that BITM and SHIFT cannot be used to determine where the
 277      operand goes in the insn.  */
 278   int shift;
 279
 280   /* Insertion function.  This is used by the assembler.  To insert an
 281      operand value into an instruction, check this field.
 282
 283      If it is NULL, execute
 284          if (o->shift >= 0)
 285            i |= (op & o->bitm) << o->shift;
 286          else
 287            i |= (op & o->bitm) >> -o->shift;
 288      (i is the instruction which we are filling in, o is a pointer to
 289      this structure, and op is the operand value).
 290
 291      If this field is not NULL, then simply call it with the
 292      instruction and the operand value.  It will return the new value
 293      of the instruction.  If the operand value is illegal, *ERRMSG
 294      will be set to a warning string (the operand will be inserted in
 295      any case).  If the operand value is legal, *ERRMSG will be
 296      unchanged (most operands can accept any value).  */
 297   uint64_t (*insert)
 298     (uint64_t instruction, int64_t op, ppc_cpu_t dialect, const char **errmsg);
 299
 300   /* Extraction function.  This is used by the disassembler.  To
 301      extract this operand type from an instruction, check this field.
 302
 303      If it is NULL, compute
 304          if (o->shift >= 0)
 305            op = (i >> o->shift) & o->bitm;
 306          else
 307            op = (i << -o->shift) & o->bitm;
 308          if ((o->flags & PPC_OPERAND_SIGNED) != 0)
 309            sign_extend (op);
 310      (i is the instruction, o is a pointer to this structure, and op
 311      is the result).
 312
 313      If this field is not NULL, then simply call it with the
 314      instruction value.  It will return the value of the operand.
 315      *INVALID will be set to one by the extraction function if this
 316      operand type can not be extracted from this operand (i.e., the
 317      instruction does not match).  If the operand is valid, *INVALID
 318      will not be changed.  *INVALID will always be non-negative when
 319      used to extract a field from an instruction.
 320
 321      The extraction function is also called by both the assembler and
 322      disassembler if an operand is optional, in which case the
 323      function should return the default value of the operand.
 324      *INVALID is negative in this case, and is the negative count of
 325      omitted optional operands up to and including this operand.  */
 326   int64_t (*extract) (uint64_t instruction, ppc_cpu_t dialect, int *invalid);
 327
 328   /* One bit syntax flags.  */
 329   unsigned long flags;
 330 };
 331
 332 /* Elements in the table are retrieved by indexing with values from
 333    the operands field of the powerpc_opcodes table.  */
 334
 335 extern const struct powerpc_operand powerpc_operands[];
 336 extern const unsigned int num_powerpc_operands;
 337
 338 /* Use with the shift field of a struct powerpc_operand to indicate
 339      that BITM and SHIFT cannot be used to determine where the operand
 340      goes in the insn.  */
 341 #define PPC_OPSHIFT_INV (-1U << 31)
 342
 343 /* Values defined for the flags field of a struct powerpc_operand.
 344    Keep the register bits low:  They need to fit in an unsigned short.  */
 345
 346 /* This operand names a register.  The disassembler uses this to print
 347    register names with a leading 'r'.  */
 348 #define PPC_OPERAND_GPR (0x1)
 349
 350 /* Like PPC_OPERAND_GPR, but don't print a leading 'r' for r0.  */
 351 #define PPC_OPERAND_GPR_0 (0x2)
 352
 353 /* This operand names a floating point register.  The disassembler
 354    prints these with a leading 'f'.  */
 355 #define PPC_OPERAND_FPR (0x4)
 356
 357 /* This operand names a vector unit register.  The disassembler
 358    prints these with a leading 'v'.  */
 359 #define PPC_OPERAND_VR (0x8)
 360
 361 /* This operand names a vector-scalar unit register.  The disassembler
 362    prints these with a leading 'vs'.  */
 363 #define PPC_OPERAND_VSR (0x10)
 364
 365 /* This operand names a VSX accumulator.  */
 366 #define PPC_OPERAND_ACC (0x20)
 367
 368 /* This operand may use the symbolic names for the CR fields (even
 369    without -mregnames), which are
 370        lt  0    gt  1   eq  2   so  3   un  3
 371        cr0 0    cr1 1   cr2 2   cr3 3
 372        cr4 4    cr5 5   cr6 6   cr7 7
 373    These may be combined arithmetically, as in cr2*4+gt.  These are
 374    only supported on the PowerPC, not the POWER.  */
 375 #define PPC_OPERAND_CR_BIT (0x40)
 376
 377 /* This is a CR FIELD that does not use symbolic names (unless
 378    -mregnames is in effect).  If both PPC_OPERAND_CR_BIT and
 379    PPC_OPERAND_CR_REG are set then treat the field as per
 380    PPC_OPERAND_CR_BIT for assembly, but as if neither of these
 381    bits are set for disassembly.  */
 382 #define PPC_OPERAND_CR_REG (0x80)
 383
 384 /* This operand names a special purpose register.  */
 385 #define PPC_OPERAND_SPR (0x100)
 386
 387 /* This operand names a paired-single graphics quantization register.  */
 388 #define PPC_OPERAND_GQR (0x200)
 389
 390 /* This operand is a relative branch displacement.  The disassembler
 391    prints these symbolically if possible.  */
 392 #define PPC_OPERAND_RELATIVE (0x400)
 393
 394 /* This operand is an absolute branch address.  The disassembler
 395    prints these symbolically if possible.  */
 396 #define PPC_OPERAND_ABSOLUTE (0x800)
 397
 398 /* This operand takes signed values.  */
 399 #define PPC_OPERAND_SIGNED (0x1000)
 400
 401 /* This operand takes signed values, but also accepts a full positive
 402    range of values when running in 32 bit mode.  That is, if bits is
 403    16, it takes any value from -0x8000 to 0xffff.  In 64 bit mode,
 404    this flag is ignored.  */
 405 #define PPC_OPERAND_SIGNOPT (0x2000)
 406
 407 /* The next operand should be wrapped in parentheses rather than
 408    separated from this one by a comma.  This is used for the load and
 409    store instructions which want their operands to look like
 410        reg,displacement(reg)
 411    */
 412 #define PPC_OPERAND_PARENS (0x4000)
 413
 414 /* This operand is for the DS field in a DS form instruction.  */
 415 #define PPC_OPERAND_DS (0x8000)
 416
 417 /* This operand is for the DQ field in a DQ form instruction.  */
 418 #define PPC_OPERAND_DQ (0x10000)
 419
 420 /* This operand should be regarded as a negative number for the
 421    purposes of overflow checking (i.e., the normal most negative
 422    number is disallowed and one more than the normal most positive
 423    number is allowed).  This flag will only be set for a signed
 424    operand.  */
 425 #define PPC_OPERAND_NEGATIVE (0x20000)
 426
 427 /* Valid range of operand is 0..n rather than 0..n-1.  */
 428 #define PPC_OPERAND_PLUS1 (0x40000)
 429
 430 /* This operand is optional, and is zero if omitted.  This is used for
 431    example, in the optional BF field in the comparison instructions.  The
 432    assembler must count the number of operands remaining on the line,
 433    and the number of operands remaining for the opcode, and decide
 434    whether this operand is present or not.  The disassembler should
 435    print this operand out only if it is not zero.  */
 436 #define PPC_OPERAND_OPTIONAL (0x80000)
 437
 438 /* This flag is only used with PPC_OPERAND_OPTIONAL.  If this operand
 439    is omitted, then for the next operand use this operand value plus
 440    1, ignoring the next operand field for the opcode.  This wretched
 441    hack is needed because the Power rotate instructions can take
 442    either 4 or 5 operands.  The disassembler should print this operand
 443    out regardless of the PPC_OPERAND_OPTIONAL field.  */
 444 #define PPC_OPERAND_NEXT (0x100000)
 445
 446 /* This flag is only used with PPC_OPERAND_OPTIONAL.  The operand is
 447    only optional when generating 32-bit code.  */
 448 #define PPC_OPERAND_OPTIONAL32 (0x400000)
 449
 450 /* Xilinx APU and FSL related operands */
 451 #define PPC_OPERAND_FSL (0x800000)
 452 #define PPC_OPERAND_FCR (0x1000000)
 453 #define PPC_OPERAND_UDI (0x2000000)
 454 \f
 455 /* The POWER and PowerPC assemblers use a few macros.  We keep them
 456    with the operands table for simplicity.  The macro table is an
 457    array of struct powerpc_macro.  */
 458
 459 struct powerpc_macro
 460 {
 461   /* The macro name.  */
 462   const char *name;
 463
 464   /* The number of operands the macro takes.  */
 465   unsigned int operands;
 466
 467   /* One bit flags for the opcode.  These are used to indicate which
 468      specific processors support the instructions.  The values are the
 469      same as those for the struct powerpc_opcode flags field.  */
 470   ppc_cpu_t flags;
 471
 472   /* A format string to turn the macro into a normal instruction.
 473      Each %N in the string is replaced with operand number N (zero
 474      based).  */
 475   const char *format;
 476 };
 477
 478 extern const struct powerpc_macro powerpc_macros[];
 479 extern const int powerpc_num_macros;
 480
 481 extern ppc_cpu_t ppc_parse_cpu (ppc_cpu_t, ppc_cpu_t *, const char *);
 482
 483 static inline int64_t
 484 ppc_optional_operand_value (const struct powerpc_operand *operand,
 485                             uint64_t insn,
 486                             ppc_cpu_t dialect,
 487                             int num_optional)
 488 {
 489   if (operand->extract)
 490     return (*operand->extract) (insn, dialect, &num_optional);
 491   return 0;
 492 }
 493
 494 /* PowerPC VLE insns.  */
 495 #define E_OPCODE_MASK           0xfc00f800
 496
 497 /* Form I16L, uses 16A relocs.  */
 498 #define E_OR2I_INSN             0x7000C000
 499 #define E_AND2I_DOT_INSN        0x7000C800
 500 #define E_OR2IS_INSN            0x7000D000
 501 #define E_LIS_INSN              0x7000E000
 502 #define E_AND2IS_DOT_INSN       0x7000E800
 503
 504 /* Form I16A, uses 16D relocs.  */
 505 #define E_ADD2I_DOT_INSN        0x70008800
 506 #define E_ADD2IS_INSN           0x70009000
 507 #define E_CMP16I_INSN           0x70009800
 508 #define E_MULL2I_INSN           0x7000A000
 509 #define E_CMPL16I_INSN          0x7000A800
 510 #define E_CMPH16I_INSN          0x7000B000
 511 #define E_CMPHL16I_INSN         0x7000B800
 512
 513 #define E_LI_INSN               0x70000000
 514 #define E_LI_MASK               0xfc008000
 515
 516 #ifdef __cplusplus
 517 }
 518 #endif
 519
 520 #endif /* PPC_H */