hw/pflash_cfi01.c

   1 /*
   2  *  CFI parallel flash with Intel command set emulation
   3  *
   4  *  Copyright (c) 2006 Thorsten Zitterell
   5  *  Copyright (c) 2005 Jocelyn Mayer
   6  *
   7  * This library is free software; you can redistribute it and/or
   8  * modify it under the terms of the GNU Lesser General Public
   9  * License as published by the Free Software Foundation; either
  10  * version 2 of the License, or (at your option) any later version.
  11  *
  12  * This library is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  15  * Lesser General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU Lesser General Public
  18  * License along with this library; if not, write to the Free Software
  19  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston MA  02110-1301 USA
  20  */
  21
  22 /*
  23  * For now, this code can emulate flashes of 1, 2 or 4 bytes width.
  24  * Supported commands/modes are:
  25  * - flash read
  26  * - flash write
  27  * - flash ID read
  28  * - sector erase
  29  * - CFI queries
  30  *
  31  * It does not support timings
  32  * It does not support flash interleaving
  33  * It does not implement software data protection as found in many real chips
  34  * It does not implement erase suspend/resume commands
  35  * It does not implement multiple sectors erase
  36  *
  37  * It does not implement much more ...
  38  */
  39
  40 #include "hw.h"
  41 #include "flash.h"
  42 #include "block.h"
  43 #include "qemu-timer.h"
  44
  45 #define PFLASH_BUG(fmt, args...) \
  46 do { \
  47     printf("PFLASH: Possible BUG - " fmt, ##args); \
  48     exit(1); \
  49 } while(0)
  50
  51 /* #define PFLASH_DEBUG */
  52 #ifdef PFLASH_DEBUG
  53 #define DPRINTF(fmt, args...)                      \
  54 do {                                               \
  55         printf("PFLASH: " fmt , ##args);           \
  56 } while (0)
  57 #else
  58 #define DPRINTF(fmt, args...) do { } while (0)
  59 #endif
  60
  61 struct pflash_t {
  62     BlockDriverState *bs;
  63     target_ulong base;
  64     target_ulong sector_len;
  65     target_ulong total_len;
  66     int width;
  67     int wcycle; /* if 0, the flash is read normally */
  68     int bypass;
  69     int ro;
  70     uint8_t cmd;
  71     uint8_t status;
  72     uint16_t ident[4];
  73     uint8_t cfi_len;
  74     uint8_t cfi_table[0x52];
  75     target_ulong counter;
  76     QEMUTimer *timer;
  77     ram_addr_t off;
  78     int fl_mem;
  79     void *storage;
  80 };
  81
  82 static void pflash_timer (void *opaque)
  83 {
  84     pflash_t *pfl = opaque;
  85
  86     DPRINTF("%s: command %02x done\n", __func__, pfl->cmd);
  87     /* Reset flash */
  88     pfl->status ^= 0x80;
  89     if (pfl->bypass) {
  90         pfl->wcycle = 2;
  91     } else {
  92         cpu_register_physical_memory(pfl->base, pfl->total_len,
  93                         pfl->off | IO_MEM_ROMD | pfl->fl_mem);
  94         pfl->wcycle = 0;
  95     }
  96     pfl->cmd = 0;
  97 }
  98
  99 static uint32_t pflash_read (pflash_t *pfl, target_ulong offset, int width)
 100 {
 101     target_ulong boff;
 102     uint32_t ret;
 103     uint8_t *p;
 104
 105     ret = -1;
 106     boff = offset & 0xFF; /* why this here ?? */
 107
 108     if (pfl->width == 2)
 109         boff = boff >> 1;
 110     else if (pfl->width == 4)
 111         boff = boff >> 2;
 112
 113     DPRINTF("%s: reading offset " TARGET_FMT_lx " under cmd %02x width %d\n",
 114             __func__, offset, pfl->cmd, width);
 115
 116     switch (pfl->cmd) {
 117     case 0x00:
 118         /* Flash area read */
 119         p = pfl->storage;
 120         switch (width) {
 121         case 1:
 122             ret = p[offset];
 123             DPRINTF("%s: data offset " TARGET_FMT_lx " %02x\n",
 124                     __func__, offset, ret);
 125             break;
 126         case 2:
 127 #if defined(TARGET_WORDS_BIGENDIAN)
 128             ret = p[offset] << 8;
 129             ret |= p[offset + 1];
 130 #else
 131             ret = p[offset];
 132             ret |= p[offset + 1] << 8;
 133 #endif
 134             DPRINTF("%s: data offset " TARGET_FMT_lx " %04x\n",
 135                     __func__, offset, ret);
 136             break;
 137         case 4:
 138 #if defined(TARGET_WORDS_BIGENDIAN)
 139             ret = p[offset] << 24;
 140             ret |= p[offset + 1] << 16;
 141             ret |= p[offset + 2] << 8;
 142             ret |= p[offset + 3];
 143 #else
 144             ret = p[offset];
 145             ret |= p[offset + 1] << 8;
 146             ret |= p[offset + 1] << 8;
 147             ret |= p[offset + 2] << 16;
 148             ret |= p[offset + 3] << 24;
 149 #endif
 150             DPRINTF("%s: data offset " TARGET_FMT_lx " %08x\n",
 151                     __func__, offset, ret);
 152             break;
 153         default:
 154             DPRINTF("BUG in %s\n", __func__);
 155         }
 156
 157         break;
 158     case 0x20: /* Block erase */
 159     case 0x50: /* Clear status register */
 160     case 0x60: /* Block /un)lock */
 161     case 0x70: /* Status Register */
 162     case 0xe8: /* Write block */
 163         /* Status register read */
 164         ret = pfl->status;
 165         DPRINTF("%s: status %x\n", __func__, ret);
 166         break;
 167     case 0x98: /* Query mode */
 168         if (boff > pfl->cfi_len)
 169             ret = 0;
 170         else
 171             ret = pfl->cfi_table[boff];
 172         break;
 173     default:
 174         /* This should never happen : reset state & treat it as a read */
 175         DPRINTF("%s: unknown command state: %x\n", __func__, pfl->cmd);
 176         pfl->wcycle = 0;
 177         pfl->cmd = 0;
 178     }
 179     return ret;
 180 }
 181
 182 /* update flash content on disk */
 183 static void pflash_update(pflash_t *pfl, int offset,
 184                           int size)
 185 {
 186     int offset_end;
 187     if (pfl->bs) {
 188         offset_end = offset + size;
 189         /* round to sectors */
 190         offset = offset >> 9;
 191         offset_end = (offset_end + 511) >> 9;
 192         bdrv_write(pfl->bs, offset, pfl->storage + (offset << 9),
 193                    offset_end - offset);
 194     }
 195 }
 196
 197 static void inline pflash_data_write(pflash_t *pfl, target_ulong offset,
 198                           uint32_t value, int width)
 199 {
 200     uint8_t *p = pfl->storage;
 201
 202     DPRINTF("%s: block write offset " TARGET_FMT_lx
 203             " value %x counter " TARGET_FMT_lx "\n",
 204             __func__, offset, value, pfl->counter);
 205     switch (width) {
 206     case 1:
 207         p[offset] = value;
 208         pflash_update(pfl, offset, 1);
 209         break;
 210     case 2:
 211 #if defined(TARGET_WORDS_BIGENDIAN)
 212         p[offset] = value >> 8;
 213         p[offset + 1] = value;
 214 #else
 215         p[offset] = value;
 216         p[offset + 1] = value >> 8;
 217 #endif
 218         pflash_update(pfl, offset, 2);
 219         break;
 220     case 4:
 221 #if defined(TARGET_WORDS_BIGENDIAN)
 222         p[offset] = value >> 24;
 223         p[offset + 1] = value >> 16;
 224         p[offset + 2] = value >> 8;
 225         p[offset + 3] = value;
 226 #else
 227         p[offset] = value;
 228         p[offset + 1] = value >> 8;
 229         p[offset + 2] = value >> 16;
 230         p[offset + 3] = value >> 24;
 231 #endif
 232         pflash_update(pfl, offset, 4);
 233         break;
 234     }
 235
 236 }
 237
 238 static void pflash_write (pflash_t *pfl, target_ulong offset, uint32_t value,
 239                           int width)
 240 {
 241     target_ulong boff;
 242     uint8_t *p;
 243     uint8_t cmd;
 244
 245     cmd = value;
 246
 247     DPRINTF("%s: writing offset " TARGET_FMT_lx " value %08x width %d wcycle 0x%x\n",
 248             __func__, offset, value, width, pfl->wcycle);
 249
 250     /* Set the device in I/O access mode */
 251     cpu_register_physical_memory(pfl->base, pfl->total_len, pfl->fl_mem);
 252     boff = offset & (pfl->sector_len - 1);
 253
 254     if (pfl->width == 2)
 255         boff = boff >> 1;
 256     else if (pfl->width == 4)
 257         boff = boff >> 2;
 258
 259     switch (pfl->wcycle) {
 260     case 0:
 261         /* read mode */
 262         switch (cmd) {
 263         case 0x00: /* ??? */
 264             goto reset_flash;
 265         case 0x10: /* Single Byte Program */
 266         case 0x40: /* Single Byte Program */
 267             DPRINTF(stderr, "%s: Single Byte Program\n", __func__);
 268             break;
 269         case 0x20: /* Block erase */
 270             p = pfl->storage;
 271             offset &= ~(pfl->sector_len - 1);
 272
 273             DPRINTF("%s: block erase at " TARGET_FMT_lx " bytes "
 274                     TARGET_FMT_lx "\n",
 275                     __func__, offset, pfl->sector_len);
 276
 277             memset(p + offset, 0xff, pfl->sector_len);
 278             pflash_update(pfl, offset, pfl->sector_len);
 279             pfl->status |= 0x80; /* Ready! */
 280             break;
 281         case 0x50: /* Clear status bits */
 282             DPRINTF("%s: Clear status bits\n", __func__);
 283             pfl->status = 0x0;
 284             goto reset_flash;
 285         case 0x60: /* Block (un)lock */
 286             DPRINTF("%s: Block unlock\n", __func__);
 287             break;
 288         case 0x70: /* Status Register */
 289             DPRINTF("%s: Read status register\n", __func__);
 290             pfl->cmd = cmd;
 291             return;
 292         case 0x98: /* CFI query */
 293             DPRINTF("%s: CFI query\n", __func__);
 294             break;
 295         case 0xe8: /* Write to buffer */
 296             DPRINTF("%s: Write to buffer\n", __func__);
 297             pfl->status |= 0x80; /* Ready! */
 298             break;
 299         case 0xff: /* Read array mode */
 300             DPRINTF("%s: Read array mode\n", __func__);
 301             goto reset_flash;
 302         default:
 303             goto error_flash;
 304         }
 305         pfl->wcycle++;
 306         pfl->cmd = cmd;
 307         return;
 308     case 1:
 309         switch (pfl->cmd) {
 310         case 0x10: /* Single Byte Program */
 311         case 0x40: /* Single Byte Program */
 312             DPRINTF("%s: Single Byte Program\n", __func__);
 313             pflash_data_write(pfl, offset, value, width);
 314             pfl->status |= 0x80; /* Ready! */
 315             pfl->wcycle = 0;
 316         break;
 317         case 0x20: /* Block erase */
 318         case 0x28:
 319             if (cmd == 0xd0) { /* confirm */
 320                 pfl->wcycle = 0;
 321                 pfl->status |= 0x80;
 322             } else if (cmd == 0xff) { /* read array mode */
 323                 goto reset_flash;
 324             } else
 325                 goto error_flash;
 326
 327             break;
 328         case 0xe8:
 329             DPRINTF("%s: block write of %x bytes\n", __func__, value);
 330             pfl->counter = value;
 331             pfl->wcycle++;
 332             break;
 333         case 0x60:
 334             if (cmd == 0xd0) {
 335                 pfl->wcycle = 0;
 336                 pfl->status |= 0x80;
 337             } else if (cmd == 0x01) {
 338                 pfl->wcycle = 0;
 339                 pfl->status |= 0x80;
 340             } else if (cmd == 0xff) {
 341                 goto reset_flash;
 342             } else {
 343                 DPRINTF("%s: Unknown (un)locking command\n", __func__);
 344                 goto reset_flash;
 345             }
 346             break;
 347         case 0x98:
 348             if (cmd == 0xff) {
 349                 goto reset_flash;
 350             } else {
 351                 DPRINTF("%s: leaving query mode\n", __func__);
 352             }
 353             break;
 354         default:
 355             goto error_flash;
 356         }
 357         return;
 358     case 2:
 359         switch (pfl->cmd) {
 360         case 0xe8: /* Block write */
 361             pflash_data_write(pfl, offset, value, width);
 362
 363             pfl->status |= 0x80;
 364
 365             if (!pfl->counter) {
 366                 DPRINTF("%s: block write finished\n", __func__);
 367                 pfl->wcycle++;
 368             }
 369
 370             pfl->counter--;
 371             break;
 372         default:
 373             goto error_flash;
 374         }
 375         return;
 376     case 3: /* Confirm mode */
 377         switch (pfl->cmd) {
 378         case 0xe8: /* Block write */
 379             if (cmd == 0xd0) {
 380                 pfl->wcycle = 0;
 381                 pfl->status |= 0x80;
 382             } else {
 383                 DPRINTF("%s: unknown command for \"write block\"\n", __func__);
 384                 PFLASH_BUG("Write block confirm");
 385                 goto reset_flash;
 386             }
 387             break;
 388         default:
 389             goto error_flash;
 390         }
 391         return;
 392     default:
 393         /* Should never happen */
 394         DPRINTF("%s: invalid write state\n",  __func__);
 395         goto reset_flash;
 396     }
 397     return;
 398
 399  error_flash:
 400     printf("%s: Unimplemented flash cmd sequence "
 401            "(offset " TARGET_FMT_lx ", wcycle 0x%x cmd 0x%x value 0x%x)\n",
 402            __func__, offset, pfl->wcycle, pfl->cmd, value);
 403
 404  reset_flash:
 405     cpu_register_physical_memory(pfl->base, pfl->total_len,
 406                     pfl->off | IO_MEM_ROMD | pfl->fl_mem);
 407
 408     pfl->bypass = 0;
 409     pfl->wcycle = 0;
 410     pfl->cmd = 0;
 411     return;
 412 }
 413
 414
 415 static uint32_t pflash_readb (void *opaque, target_phys_addr_t addr)
 416 {
 417     return pflash_read(opaque, addr, 1);
 418 }
 419
 420 static uint32_t pflash_readw (void *opaque, target_phys_addr_t addr)
 421 {
 422     pflash_t *pfl = opaque;
 423
 424     return pflash_read(pfl, addr, 2);
 425 }
 426
 427 static uint32_t pflash_readl (void *opaque, target_phys_addr_t addr)
 428 {
 429     pflash_t *pfl = opaque;
 430
 431     return pflash_read(pfl, addr, 4);
 432 }
 433
 434 static void pflash_writeb (void *opaque, target_phys_addr_t addr,
 435                            uint32_t value)
 436 {
 437     pflash_write(opaque, addr, value, 1);
 438 }
 439
 440 static void pflash_writew (void *opaque, target_phys_addr_t addr,
 441                            uint32_t value)
 442 {
 443     pflash_t *pfl = opaque;
 444
 445     pflash_write(pfl, addr, value, 2);
 446 }
 447
 448 static void pflash_writel (void *opaque, target_phys_addr_t addr,
 449                            uint32_t value)
 450 {
 451     pflash_t *pfl = opaque;
 452
 453     pflash_write(pfl, addr, value, 4);
 454 }
 455
 456 static CPUWriteMemoryFunc *pflash_write_ops[] = {
 457     &pflash_writeb,
 458     &pflash_writew,
 459     &pflash_writel,
 460 };
 461
 462 static CPUReadMemoryFunc *pflash_read_ops[] = {
 463     &pflash_readb,
 464     &pflash_readw,
 465     &pflash_readl,
 466 };
 467
 468 /* Count trailing zeroes of a 32 bits quantity */
 469 static int ctz32 (uint32_t n)
 470 {
 471     int ret;
 472
 473     ret = 0;
 474     if (!(n & 0xFFFF)) {
 475         ret += 16;
 476         n = n >> 16;
 477     }
 478     if (!(n & 0xFF)) {
 479         ret += 8;
 480         n = n >> 8;
 481     }
 482     if (!(n & 0xF)) {
 483         ret += 4;
 484         n = n >> 4;
 485     }
 486     if (!(n & 0x3)) {
 487         ret += 2;
 488         n = n >> 2;
 489     }
 490     if (!(n & 0x1)) {
 491         ret++;
 492         n = n >> 1;
 493     }
 494 #if 0 /* This is not necessary as n is never 0 */
 495     if (!n)
 496         ret++;
 497 #endif
 498
 499     return ret;
 500 }
 501
 502 pflash_t *pflash_cfi01_register(target_phys_addr_t base, ram_addr_t off,
 503                                 BlockDriverState *bs, uint32_t sector_len,
 504                                 int nb_blocs, int width,
 505                                 uint16_t id0, uint16_t id1,
 506                                 uint16_t id2, uint16_t id3)
 507 {
 508     pflash_t *pfl;
 509     target_long total_len;
 510
 511     total_len = sector_len * nb_blocs;
 512
 513     /* XXX: to be fixed */
 514 #if 0
 515     if (total_len != (8 * 1024 * 1024) && total_len != (16 * 1024 * 1024) &&
 516         total_len != (32 * 1024 * 1024) && total_len != (64 * 1024 * 1024))
 517         return NULL;
 518 #endif
 519
 520     pfl = qemu_mallocz(sizeof(pflash_t));
 521
 522     pfl->storage = phys_ram_base + off;
 523     pfl->fl_mem = cpu_register_io_memory(0,
 524                     pflash_read_ops, pflash_write_ops, pfl);
 525     pfl->off = off;
 526     cpu_register_physical_memory(base, total_len,
 527                     off | pfl->fl_mem | IO_MEM_ROMD);
 528
 529     pfl->bs = bs;
 530     if (pfl->bs) {
 531         /* read the initial flash content */
 532         bdrv_read(pfl->bs, 0, pfl->storage, total_len >> 9);
 533     }
 534 #if 0 /* XXX: there should be a bit to set up read-only,
 535        *      the same way the hardware does (with WP pin).
 536        */
 537     pfl->ro = 1;
 538 #else
 539     pfl->ro = 0;
 540 #endif
 541     pfl->timer = qemu_new_timer(vm_clock, pflash_timer, pfl);
 542     pfl->base = base;
 543     pfl->sector_len = sector_len;
 544     pfl->total_len = total_len;
 545     pfl->width = width;
 546     pfl->wcycle = 0;
 547     pfl->cmd = 0;
 548     pfl->status = 0;
 549     pfl->ident[0] = id0;
 550     pfl->ident[1] = id1;
 551     pfl->ident[2] = id2;
 552     pfl->ident[3] = id3;
 553     /* Hardcoded CFI table */
 554     pfl->cfi_len = 0x52;
 555     /* Standard "QRY" string */
 556     pfl->cfi_table[0x10] = 'Q';
 557     pfl->cfi_table[0x11] = 'R';
 558     pfl->cfi_table[0x12] = 'Y';
 559     /* Command set (Intel) */
 560     pfl->cfi_table[0x13] = 0x01;
 561     pfl->cfi_table[0x14] = 0x00;
 562     /* Primary extended table address (none) */
 563     pfl->cfi_table[0x15] = 0x31;
 564     pfl->cfi_table[0x16] = 0x00;
 565     /* Alternate command set (none) */
 566     pfl->cfi_table[0x17] = 0x00;
 567     pfl->cfi_table[0x18] = 0x00;
 568     /* Alternate extended table (none) */
 569     pfl->cfi_table[0x19] = 0x00;
 570     pfl->cfi_table[0x1A] = 0x00;
 571     /* Vcc min */
 572     pfl->cfi_table[0x1B] = 0x45;
 573     /* Vcc max */
 574     pfl->cfi_table[0x1C] = 0x55;
 575     /* Vpp min (no Vpp pin) */
 576     pfl->cfi_table[0x1D] = 0x00;
 577     /* Vpp max (no Vpp pin) */
 578     pfl->cfi_table[0x1E] = 0x00;
 579     /* Reserved */
 580     pfl->cfi_table[0x1F] = 0x07;
 581     /* Timeout for min size buffer write */
 582     pfl->cfi_table[0x20] = 0x07;
 583     /* Typical timeout for block erase */
 584     pfl->cfi_table[0x21] = 0x0a;
 585     /* Typical timeout for full chip erase (4096 ms) */
 586     pfl->cfi_table[0x22] = 0x00;
 587     /* Reserved */
 588     pfl->cfi_table[0x23] = 0x04;
 589     /* Max timeout for buffer write */
 590     pfl->cfi_table[0x24] = 0x04;
 591     /* Max timeout for block erase */
 592     pfl->cfi_table[0x25] = 0x04;
 593     /* Max timeout for chip erase */
 594     pfl->cfi_table[0x26] = 0x00;
 595     /* Device size */
 596     pfl->cfi_table[0x27] = ctz32(total_len); // + 1;
 597     /* Flash device interface (8 & 16 bits) */
 598     pfl->cfi_table[0x28] = 0x02;
 599     pfl->cfi_table[0x29] = 0x00;
 600     /* Max number of bytes in multi-bytes write */
 601     pfl->cfi_table[0x2A] = 0x0B;
 602     pfl->cfi_table[0x2B] = 0x00;
 603     /* Number of erase block regions (uniform) */
 604     pfl->cfi_table[0x2C] = 0x01;
 605     /* Erase block region 1 */
 606     pfl->cfi_table[0x2D] = nb_blocs - 1;
 607     pfl->cfi_table[0x2E] = (nb_blocs - 1) >> 8;
 608     pfl->cfi_table[0x2F] = sector_len >> 8;
 609     pfl->cfi_table[0x30] = sector_len >> 16;
 610
 611     /* Extended */
 612     pfl->cfi_table[0x31] = 'P';
 613     pfl->cfi_table[0x32] = 'R';
 614     pfl->cfi_table[0x33] = 'I';
 615
 616     pfl->cfi_table[0x34] = '1';
 617     pfl->cfi_table[0x35] = '1';
 618
 619     pfl->cfi_table[0x36] = 0x00;
 620     pfl->cfi_table[0x37] = 0x00;
 621     pfl->cfi_table[0x38] = 0x00;
 622     pfl->cfi_table[0x39] = 0x00;
 623
 624     pfl->cfi_table[0x3a] = 0x00;
 625
 626     pfl->cfi_table[0x3b] = 0x00;
 627     pfl->cfi_table[0x3c] = 0x00;
 628
 629     return pfl;
 630 }