hw/slavio_intctl.c

   1 /*
   2  * QEMU Sparc SLAVIO interrupt controller emulation
   3  *
   4  * Copyright (c) 2003-2005 Fabrice Bellard
   5  *
   6  * Permission is hereby granted, free of charge, to any person obtaining a copy
   7  * of this software and associated documentation files (the "Software"), to deal
   8  * in the Software without restriction, including without limitation the rights
   9  * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
  10  * copies of the Software, and to permit persons to whom the Software is
  11  * furnished to do so, subject to the following conditions:
  12  *
  13  * The above copyright notice and this permission notice shall be included in
  14  * all copies or substantial portions of the Software.
  15  *
  16  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  17  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  18  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
  19  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  20  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
  21  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
  22  * THE SOFTWARE.
  23  */
  24 #include "hw.h"
  25 #include "sun4m.h"
  26 #include "monitor.h"
  27
  28 //#define DEBUG_IRQ_COUNT
  29 //#define DEBUG_IRQ
  30
  31 #ifdef DEBUG_IRQ
  32 #define DPRINTF(fmt, args...) \
  33 do { printf("IRQ: " fmt , ##args); } while (0)
  34 #else
  35 #define DPRINTF(fmt, args...)
  36 #endif
  37
  38 /*
  39  * Registers of interrupt controller in sun4m.
  40  *
  41  * This is the interrupt controller part of chip STP2001 (Slave I/O), also
  42  * produced as NCR89C105. See
  43  * http://www.ibiblio.org/pub/historic-linux/early-ports/Sparc/NCR/NCR89C105.txt
  44  *
  45  * There is a system master controller and one for each cpu.
  46  *
  47  */
  48
  49 #define MAX_CPUS 16
  50 #define MAX_PILS 16
  51
  52 struct SLAVIO_CPUINTCTLState;
  53
  54 typedef struct SLAVIO_INTCTLState {
  55     uint32_t intregm_pending;
  56     uint32_t intregm_disabled;
  57     uint32_t target_cpu;
  58 #ifdef DEBUG_IRQ_COUNT
  59     uint64_t irq_count[32];
  60 #endif
  61     qemu_irq *cpu_irqs[MAX_CPUS];
  62     const uint32_t *intbit_to_level;
  63     uint32_t cputimer_lbit, cputimer_mbit;
  64     uint32_t pil_out[MAX_CPUS];
  65     struct SLAVIO_CPUINTCTLState *slaves[MAX_CPUS];
  66 } SLAVIO_INTCTLState;
  67
  68 typedef struct SLAVIO_CPUINTCTLState {
  69     uint32_t intreg_pending;
  70     SLAVIO_INTCTLState *master;
  71     uint32_t cpu;
  72 } SLAVIO_CPUINTCTLState;
  73
  74 #define INTCTL_MAXADDR 0xf
  75 #define INTCTL_SIZE (INTCTL_MAXADDR + 1)
  76 #define INTCTLM_SIZE 0x14
  77 #define MASTER_IRQ_MASK ~0x0fa2007f
  78 #define MASTER_DISABLE 0x80000000
  79 #define CPU_SOFTIRQ_MASK 0xfffe0000
  80 #define CPU_HARDIRQ_MASK 0x0000fffe
  81 #define CPU_IRQ_INT15_IN 0x0004000
  82 #define CPU_IRQ_INT15_MASK 0x80000000
  83
  84 static void slavio_check_interrupts(SLAVIO_INTCTLState *s);
  85
  86 // per-cpu interrupt controller
  87 static uint32_t slavio_intctl_mem_readl(void *opaque, target_phys_addr_t addr)
  88 {
  89     SLAVIO_CPUINTCTLState *s = opaque;
  90     uint32_t saddr, ret;
  91
  92     saddr = addr >> 2;
  93     switch (saddr) {
  94     case 0:
  95         ret = s->intreg_pending;
  96         break;
  97     default:
  98         ret = 0;
  99         break;
 100     }
 101     DPRINTF("read cpu %d reg 0x" TARGET_FMT_plx " = %x\n", s->cpu, addr, ret);
 102
 103     return ret;
 104 }
 105
 106 static void slavio_intctl_mem_writel(void *opaque, target_phys_addr_t addr,
 107                                      uint32_t val)
 108 {
 109     SLAVIO_CPUINTCTLState *s = opaque;
 110     uint32_t saddr;
 111
 112     saddr = addr >> 2;
 113     DPRINTF("write cpu %d reg 0x" TARGET_FMT_plx " = %x\n", s->cpu, addr, val);
 114     switch (saddr) {
 115     case 1: // clear pending softints
 116         if (val & CPU_IRQ_INT15_IN)
 117             val |= CPU_IRQ_INT15_MASK;
 118         val &= CPU_SOFTIRQ_MASK;
 119         s->intreg_pending &= ~val;
 120         slavio_check_interrupts(s->master);
 121         DPRINTF("Cleared cpu %d irq mask %x, curmask %x\n", s->cpu, val,
 122                 s->intreg_pending);
 123         break;
 124     case 2: // set softint
 125         val &= CPU_SOFTIRQ_MASK;
 126         s->intreg_pending |= val;
 127         slavio_check_interrupts(s->master);
 128         DPRINTF("Set cpu %d irq mask %x, curmask %x\n", s->cpu, val,
 129                 s->intreg_pending);
 130         break;
 131     default:
 132         break;
 133     }
 134 }
 135
 136 static CPUReadMemoryFunc *slavio_intctl_mem_read[3] = {
 137     NULL,
 138     NULL,
 139     slavio_intctl_mem_readl,
 140 };
 141
 142 static CPUWriteMemoryFunc *slavio_intctl_mem_write[3] = {
 143     NULL,
 144     NULL,
 145     slavio_intctl_mem_writel,
 146 };
 147
 148 // master system interrupt controller
 149 static uint32_t slavio_intctlm_mem_readl(void *opaque, target_phys_addr_t addr)
 150 {
 151     SLAVIO_INTCTLState *s = opaque;
 152     uint32_t saddr, ret;
 153
 154     saddr = addr >> 2;
 155     switch (saddr) {
 156     case 0:
 157         ret = s->intregm_pending & ~MASTER_DISABLE;
 158         break;
 159     case 1:
 160         ret = s->intregm_disabled & MASTER_IRQ_MASK;
 161         break;
 162     case 4:
 163         ret = s->target_cpu;
 164         break;
 165     default:
 166         ret = 0;
 167         break;
 168     }
 169     DPRINTF("read system reg 0x" TARGET_FMT_plx " = %x\n", addr, ret);
 170
 171     return ret;
 172 }
 173
 174 static void slavio_intctlm_mem_writel(void *opaque, target_phys_addr_t addr,
 175                                       uint32_t val)
 176 {
 177     SLAVIO_INTCTLState *s = opaque;
 178     uint32_t saddr;
 179
 180     saddr = addr >> 2;
 181     DPRINTF("write system reg 0x" TARGET_FMT_plx " = %x\n", addr, val);
 182     switch (saddr) {
 183     case 2: // clear (enable)
 184         // Force clear unused bits
 185         val &= MASTER_IRQ_MASK;
 186         s->intregm_disabled &= ~val;
 187         DPRINTF("Enabled master irq mask %x, curmask %x\n", val,
 188                 s->intregm_disabled);
 189         slavio_check_interrupts(s);
 190         break;
 191     case 3: // set (disable, clear pending)
 192         // Force clear unused bits
 193         val &= MASTER_IRQ_MASK;
 194         s->intregm_disabled |= val;
 195         s->intregm_pending &= ~val;
 196         slavio_check_interrupts(s);
 197         DPRINTF("Disabled master irq mask %x, curmask %x\n", val,
 198                 s->intregm_disabled);
 199         break;
 200     case 4:
 201         s->target_cpu = val & (MAX_CPUS - 1);
 202         slavio_check_interrupts(s);
 203         DPRINTF("Set master irq cpu %d\n", s->target_cpu);
 204         break;
 205     default:
 206         break;
 207     }
 208 }
 209
 210 static CPUReadMemoryFunc *slavio_intctlm_mem_read[3] = {
 211     NULL,
 212     NULL,
 213     slavio_intctlm_mem_readl,
 214 };
 215
 216 static CPUWriteMemoryFunc *slavio_intctlm_mem_write[3] = {
 217     NULL,
 218     NULL,
 219     slavio_intctlm_mem_writel,
 220 };
 221
 222 void slavio_pic_info(Monitor *mon, void *opaque)
 223 {
 224     SLAVIO_INTCTLState *s = opaque;
 225     int i;
 226
 227     for (i = 0; i < MAX_CPUS; i++) {
 228         monitor_printf(mon, "per-cpu %d: pending 0x%08x\n", i,
 229                        s->slaves[i]->intreg_pending);
 230     }
 231     monitor_printf(mon, "master: pending 0x%08x, disabled 0x%08x\n",
 232                    s->intregm_pending, s->intregm_disabled);
 233 }
 234
 235 void slavio_irq_info(Monitor *mon, void *opaque)
 236 {
 237 #ifndef DEBUG_IRQ_COUNT
 238     monitor_printf(mon, "irq statistic code not compiled.\n");
 239 #else
 240     SLAVIO_INTCTLState *s = opaque;
 241     int i;
 242     int64_t count;
 243
 244     monitor_printf(mon, "IRQ statistics:\n");
 245     for (i = 0; i < 32; i++) {
 246         count = s->irq_count[i];
 247         if (count > 0)
 248             monitor_printf(mon, "%2d: %" PRId64 "\n", i, count);
 249     }
 250 #endif
 251 }
 252
 253 static void slavio_check_interrupts(SLAVIO_INTCTLState *s)
 254 {
 255     uint32_t pending = s->intregm_pending, pil_pending;
 256     unsigned int i, j;
 257
 258     pending &= ~s->intregm_disabled;
 259
 260     DPRINTF("pending %x disabled %x\n", pending, s->intregm_disabled);
 261     for (i = 0; i < MAX_CPUS; i++) {
 262         pil_pending = 0;
 263         if (pending && !(s->intregm_disabled & MASTER_DISABLE) &&
 264             (i == s->target_cpu)) {
 265             for (j = 0; j < 32; j++) {
 266                 if (pending & (1 << j))
 267                     pil_pending |= 1 << s->intbit_to_level[j];
 268             }
 269         }
 270         pil_pending |= (s->slaves[i]->intreg_pending & CPU_SOFTIRQ_MASK) >> 16;
 271
 272         for (j = 0; j < MAX_PILS; j++) {
 273             if (pil_pending & (1 << j)) {
 274                 if (!(s->pil_out[i] & (1 << j)))
 275                     qemu_irq_raise(s->cpu_irqs[i][j]);
 276             } else {
 277                 if (s->pil_out[i] & (1 << j))
 278                     qemu_irq_lower(s->cpu_irqs[i][j]);
 279             }
 280         }
 281         s->pil_out[i] = pil_pending;
 282     }
 283 }
 284
 285 /*
 286  * "irq" here is the bit number in the system interrupt register to
 287  * separate serial and keyboard interrupts sharing a level.
 288  */
 289 static void slavio_set_irq(void *opaque, int irq, int level)
 290 {
 291     SLAVIO_INTCTLState *s = opaque;
 292     uint32_t mask = 1 << irq;
 293     uint32_t pil = s->intbit_to_level[irq];
 294
 295     DPRINTF("Set cpu %d irq %d -> pil %d level %d\n", s->target_cpu, irq, pil,
 296             level);
 297     if (pil > 0) {
 298         if (level) {
 299 #ifdef DEBUG_IRQ_COUNT
 300             s->irq_count[pil]++;
 301 #endif
 302             s->intregm_pending |= mask;
 303             s->slaves[s->target_cpu]->intreg_pending |= 1 << pil;
 304         } else {
 305             s->intregm_pending &= ~mask;
 306             s->slaves[s->target_cpu]->intreg_pending &= ~(1 << pil);
 307         }
 308         slavio_check_interrupts(s);
 309     }
 310 }
 311
 312 static void slavio_set_timer_irq_cpu(void *opaque, int cpu, int level)
 313 {
 314     SLAVIO_INTCTLState *s = opaque;
 315
 316     DPRINTF("Set cpu %d local timer level %d\n", cpu, level);
 317
 318     if (level) {
 319         s->intregm_pending |= s->cputimer_mbit;
 320         s->slaves[cpu]->intreg_pending |= s->cputimer_lbit;
 321     } else {
 322         s->intregm_pending &= ~s->cputimer_mbit;
 323         s->slaves[cpu]->intreg_pending &= ~s->cputimer_lbit;
 324     }
 325
 326     slavio_check_interrupts(s);
 327 }
 328
 329 static void slavio_intctl_save(QEMUFile *f, void *opaque)
 330 {
 331     SLAVIO_INTCTLState *s = opaque;
 332     int i;
 333
 334     for (i = 0; i < MAX_CPUS; i++) {
 335         qemu_put_be32s(f, &s->slaves[i]->intreg_pending);
 336     }
 337     qemu_put_be32s(f, &s->intregm_pending);
 338     qemu_put_be32s(f, &s->intregm_disabled);
 339     qemu_put_be32s(f, &s->target_cpu);
 340 }
 341
 342 static int slavio_intctl_load(QEMUFile *f, void *opaque, int version_id)
 343 {
 344     SLAVIO_INTCTLState *s = opaque;
 345     int i;
 346
 347     if (version_id != 1)
 348         return -EINVAL;
 349
 350     for (i = 0; i < MAX_CPUS; i++) {
 351         qemu_get_be32s(f, &s->slaves[i]->intreg_pending);
 352     }
 353     qemu_get_be32s(f, &s->intregm_pending);
 354     qemu_get_be32s(f, &s->intregm_disabled);
 355     qemu_get_be32s(f, &s->target_cpu);
 356     slavio_check_interrupts(s);
 357     return 0;
 358 }
 359
 360 static void slavio_intctl_reset(void *opaque)
 361 {
 362     SLAVIO_INTCTLState *s = opaque;
 363     int i;
 364
 365     for (i = 0; i < MAX_CPUS; i++) {
 366         s->slaves[i]->intreg_pending = 0;
 367     }
 368     s->intregm_disabled = ~MASTER_IRQ_MASK;
 369     s->intregm_pending = 0;
 370     s->target_cpu = 0;
 371     slavio_check_interrupts(s);
 372 }
 373
 374 void *slavio_intctl_init(target_phys_addr_t addr, target_phys_addr_t addrg,
 375                          const uint32_t *intbit_to_level,
 376                          qemu_irq **irq, qemu_irq **cpu_irq,
 377                          qemu_irq **parent_irq, unsigned int cputimer)
 378 {
 379     int slavio_intctl_io_memory, slavio_intctlm_io_memory, i;
 380     SLAVIO_INTCTLState *s;
 381     SLAVIO_CPUINTCTLState *slave;
 382
 383     s = qemu_mallocz(sizeof(SLAVIO_INTCTLState));
 384
 385     s->intbit_to_level = intbit_to_level;
 386     for (i = 0; i < MAX_CPUS; i++) {
 387         slave = qemu_mallocz(sizeof(SLAVIO_CPUINTCTLState));
 388
 389         slave->cpu = i;
 390         slave->master = s;
 391
 392         slavio_intctl_io_memory = cpu_register_io_memory(0,
 393                                                          slavio_intctl_mem_read,
 394                                                          slavio_intctl_mem_write,
 395                                                          slave);
 396         cpu_register_physical_memory(addr + i * TARGET_PAGE_SIZE, INTCTL_SIZE,
 397                                      slavio_intctl_io_memory);
 398
 399         s->slaves[i] = slave;
 400         s->cpu_irqs[i] = parent_irq[i];
 401     }
 402
 403     slavio_intctlm_io_memory = cpu_register_io_memory(0,
 404                                                       slavio_intctlm_mem_read,
 405                                                       slavio_intctlm_mem_write,
 406                                                       s);
 407     cpu_register_physical_memory(addrg, INTCTLM_SIZE, slavio_intctlm_io_memory);
 408
 409     register_savevm("slavio_intctl", addr, 1, slavio_intctl_save,
 410                     slavio_intctl_load, s);
 411     qemu_register_reset(slavio_intctl_reset, s);
 412     *irq = qemu_allocate_irqs(slavio_set_irq, s, 32);
 413
 414     *cpu_irq = qemu_allocate_irqs(slavio_set_timer_irq_cpu, s, MAX_CPUS);
 415     s->cputimer_mbit = 1 << cputimer;
 416     s->cputimer_lbit = 1 << intbit_to_level[cputimer];
 417     slavio_intctl_reset(s);
 418     return s;
 419 }