| blob | 63394350e96f342b95730f196b095d35da003f36 |
1 ;; -----------------------------------------------------------------------
2 ;;
3 ;; Copyright 1994-2009 H. Peter Anvin - All Rights Reserved
4 ;; Copyright 2009-2010 Intel Corporation; author: H. Peter Anvin
5 ;;
6 ;; This program is free software; you can redistribute it and/or modify
7 ;; it under the terms of the GNU General Public License as published by
8 ;; the Free Software Foundation, Inc., 53 Temple Place Ste 330,
9 ;; Boston MA 02111-1307, USA; either version 2 of the License, or
10 ;; (at your option) any later version; incorporated herein by reference.
11 ;;
12 ;; -----------------------------------------------------------------------
14 ;;
15 ;; comboot.inc
16 ;;
17 ;; Common code for running a COMBOOT image
18 ;;
19 section .text16
21 ; Parameter registers definition; this is the definition
22 ; of the stack frame used by INT 21h and INT 22h.
23 %define P_FLAGS word [bp+44]
24 %define P_FLAGSL byte [bp+44]
25 %define P_FLAGSH byte [bp+45]
26 %define P_CS word [bp+42]
27 %define P_IP word [bp+40]
28 %define P_CSIP dword [bp+40]
29 %define P_DS word [bp+38]
30 %define P_ES word [bp+36]
31 %define P_FS word [bp+34]
32 %define P_GS word [bp+32]
33 %define P_EAX dword [bp+28]
34 %define P_AX word [bp+28]
35 %define P_HAX word [bp+30]
36 %define P_AL byte [bp+28]
37 %define P_AH byte [bp+29]
38 %define P_ECX dword [bp+24]
39 %define P_CX word [bp+24]
40 %define P_HCX word [bp+26]
41 %define P_CL byte [bp+24]
42 %define P_CH byte [bp+25]
43 %define P_EDX dword [bp+20]
44 %define P_DX word [bp+20]
45 %define P_HDX word [bp+22]
46 %define P_DL byte [bp+20]
47 %define P_DH byte [bp+21]
48 %define P_EBX dword [bp+16]
49 %define P_BX word [bp+16]
50 %define P_HBX word [bp+18]
51 %define P_BL byte [bp+16]
52 %define P_BH byte [bp+17]
53 %define P_EBP dword [bp+8]
54 %define P_BP word [bp+8]
55 %define P_HBP word [bp+10]
56 %define P_ESI dword [bp+4]
57 %define P_SI word [bp+4]
58 %define P_HSI word [bp+6]
59 %define P_EDI dword [bp]
60 %define P_DI word [bp]
61 %define P_HDI word [bp+2]
63 ;
64 ; Set up the COMBOOT API interrupt vectors. This is now done at
65 ; initialization time.
66 ;
67 comboot_setup_api:
68 mov di,DOSErrTramp ; Error trampolines
69 mov cx,32
70 push cx
71 mov eax,02EB206Ah ; push 20h; jmp $+4
72 .loop1: stosd
73 inc ah
74 loop .loop1
75 dec di
76 mov byte [di-1],0E9h
77 mov ax,comboot_bogus-2
78 sub ax,di
79 stosw
81 pop cx ; CX <- 32
82 mov si,4*20h ; DOS interrupt vectors
83 mov bx,comboot_vectors
84 mov di,DOSSaveVectors
85 .loop2:
86 movsd
87 movzx eax,word [bx]
88 inc bx
89 inc bx
90 mov [si-4],eax
91 loop .loop2
92 ret
94 ;
95 ; Restore the original state of the COMBOOT API vectors, and free
96 ; any low memory allocated by the comboot module.
97 ;
98 global comboot_cleanup_api:function hidden
99 comboot_cleanup_api:
100 pusha
101 mov si,DOSSaveVectors
102 mov di,4*20h
103 mov cx,20h
104 rep movsd ; Restore DOS-range vectors
105 popa
106 ret
108 section .bss16
109 alignb 4
110 DOSSaveVectors resd 32
112 section .data16
113 %define comboot_err(x) (DOSErrTramp+4*((x)-20h))
115 comboot_vectors:
116 dw comboot_return ; INT 20 = exit
117 dw comboot_err(21h) ; INT 21 = DOS-compatible system calls
118 dw comboot_int22 ; INT 22 = native system calls
119 dw comboot_err(23h) ; INT 23 = DOS Ctrl-C handler
120 dw comboot_err(24h) ; INT 24 = DOS critical error handler
121 dw comboot_err(25h) ; INT 25 = DOS absolute disk read
122 dw comboot_err(26h) ; INT 26 = DOS absolute disk write
123 dw comboot_err(27h) ; INT 27 = DOS TSR
124 dw comboot_int28 ; INT 28 = DOS idle interrupt
125 dw comboot_int29 ; INT 29 = DOS fast console output
126 dw comboot_err(2Ah) ; INT 2A = DOS network API (NetBIOS)
127 dw comboot_err(2Bh) ; INT 2B = DOS reserved
128 dw comboot_err(2Ch) ; INT 2C = DOS reserved
129 dw comboot_iret ; INT 2D = DOS reserved, AMIS
130 dw comboot_err(2Eh) ; INT 2E = DOS run command
131 dw comboot_iret ; INT 2F = DOS multiplex interrupt
132 dw comboot_err(30h) ; INT 30 = DOS CP/M system calls
133 dw comboot_err(31h) ; INT 31 = DPMI
134 dw comboot_err(32h) ; INT 32 = DOS reserved
135 dw comboot_iret ; INT 33 = DOS mouse API
136 dw comboot_err(34h) ; INT 34 = DOS FPU emulation
137 dw comboot_err(35h) ; INT 35 = DOS FPU emulation
138 dw comboot_err(36h) ; INT 36 = DOS FPU emulation
139 dw comboot_err(37h) ; INT 37 = DOS FPU emulation
140 dw comboot_err(38h) ; INT 38 = DOS FPU emulation
141 dw comboot_err(39h) ; INT 39 = DOS FPU emulation
142 dw comboot_err(3Ah) ; INT 3A = DOS FPU emulation
143 dw comboot_err(3Bh) ; INT 3B = DOS FPU emulation
144 dw comboot_err(3Ch) ; INT 3C = DOS FPU emulation
145 dw comboot_err(3Dh) ; INT 3D = DOS FPU emulation
146 dw comboot_err(3Eh) ; INT 3E = DOS FPU emulation
147 dw comboot_err(3Fh) ; INT 3F = DOS overlay manager
149 section .text16
151 comboot_resume:
152 mov bp,sp ; In case the function clobbers BP
153 setc P_FLAGSL ; Propagate CF->error
154 popad
155 pop gs
156 pop fs
157 pop es
158 pop ds
159 comboot_iret:
160 iret
162 comboot_bad_int21:
163 mov ax,P_AX
164 push P_CSIP
165 push 21h
166 ; Fall through
168 ; Attempted to execute invalid DOS system call
169 ; The interrupt number is on the stack.
170 comboot_bogus: pop dx ; Interrupt number
171 pop edi ; CS:IP
172 mov cx,err_notdos
173 push comboot_bogus_tail
174 jmp comboot_exit_msg
175 comboot_bogus_tail:
176 xchg ax,dx
177 pm_call pm_writehex2 ; Interrupt number
178 mov al,' '
179 pm_call pm_writechr
180 xchg ax,dx
181 pm_call pm_writehex4 ; Function number (AX)
182 mov al,' '
183 pm_call pm_writechr
184 mov eax,edi
185 pm_call pm_writehex8 ; CS:IP of the origin
186 pm_call crlf
187 jmp kaboom
189 ; Proper return vector
190 ; Note: this gets invoked directly via INT 20h.
191 ; We don't need to cld explicitly here, because comboot_exit does that
192 ; when invoking RESET_STACK_AND_SEGS.
193 comboot_return:
194 cli ; May not have a safe stack
195 push enter_command ; Normal return to command prompt
196 ; jmp comboot_exit
198 ;
199 ; Generic COMBOOT return to command line code
200 ; stack -> where to go next
201 ; CX -> message (for _msg version)
202 ;
203 extern comboot_cleanup_lowmem
204 comboot_exit:
205 xor cx,cx
206 comboot_exit_msg:
207 pop bx ; Return address
208 RESET_STACK_AND_SEGS si ; Contains sti, cld
209 pm_call comboot_cleanup_lowmem
210 pm_call pm_adjust_screen; The COMBOOT program might have change the screen
211 jcxz .nomsg
212 mov si,KernelName
213 pm_call pm_writestr
214 mov si,cx
215 pm_call pm_writestr
216 .nomsg:
217 jmp bx
219 ;
220 ; INT 21h system calls
221 ;
222 comboot_getkey: ; 01 = get key with echo
223 pm_call vgashowcursor
224 call comboot_getchar
225 pm_call vgahidecursor
226 pm_call pm_writechr
227 clc
228 ret
230 comboot_writechr: ; 02 = writechr
231 mov al,P_DL
232 pm_call pm_writechr
233 clc
234 ret
236 comboot_writeserial: ; 04 = write serial port
237 mov al,P_DL
238 pm_call pm_write_serial
239 clc
240 ret
242 comboot_getkeynoecho: ; 08 = get key w/o echo
243 call comboot_getchar
244 clc
245 ret
247 comboot_writestr: ; 09 = write DOS string
248 mov es,P_DS
249 mov si,P_DX
250 .loop: es lodsb
251 cmp al,'$' ; End string with $ - bizarre
252 je .done
253 pm_call pm_writechr
254 jmp short .loop
255 .done: clc
256 ret
258 comboot_checkkey: ; 0B = check keyboard status
259 cmp byte [APIKeyFlag],00h
260 jnz .waiting
261 pm_call pm_pollchar
262 .waiting: setz al
263 dec al ; AL = 0FFh if present, 0 if not
264 mov P_AL,al
265 clc
266 ret
268 comboot_checkver: ; 30 = check DOS version
269 ; We return 0 in all DOS-compatible version registers,
270 ; but the high part of eax-ebx-ecx-edx spell "SYSLINUX"
271 mov P_EAX,'SY' << 16
272 mov P_EBX,'SL' << 16
273 mov P_ECX,'IN' << 16
274 mov P_EDX,'UX' << 16
275 ret
277 comboot_getchar:
278 cmp byte [APIKeyFlag],00h
279 jne .queued
280 pm_call pm_getchar ; If not queued get input
281 and al,al ; Function key? (CF <- 0)
282 jnz .done
283 mov [APIKeyWait],ah ; High part of key
284 inc byte [APIKeyFlag] ; Set flag
285 .done: mov P_AL,al
286 ret
287 .queued: mov al,[APIKeyWait]
288 dec byte [APIKeyFlag]
289 jmp .done
291 ;
292 ; INT 28h - DOS idle
293 ;
294 comboot_int28:
295 sti
296 cld
297 extern __idle
298 pm_call __idle
299 iret
301 ;
302 ; INT 29h - DOS fast write character
303 ;
304 comboot_int29:
305 sti
306 cld
307 pm_call pm_writechr
308 iret
310 ;
311 ; INT 22h - SYSLINUX-specific system calls
312 ; System call number in ax
313 ;
314 comboot_int22:
315 sti
316 push ds
317 push es
318 push fs
319 push gs
320 pushad
321 cld
322 mov bp,cs
323 mov ds,bp
324 mov es,bp
325 mov bp,sp ; Set up stack frame
327 pm_call pm_adjust_screen ; The COMBOOT program might hav changed the screen
329 cmp ax,int22_count
330 jb .ok
331 xor ax,ax ; Function 0 -> unimplemented
332 .ok:
333 xchg ax,bx
334 add bx,bx ; CF <- 0
335 call [bx+int22_table]
336 jmp comboot_resume ; On return
338 ;
339 ; INT 22h AX=0000h Unimplemented call
340 ;
341 comapi_err:
342 stc
343 ret
345 ;
346 ; INT 22h AX=001Ch Get pointer to auxillary data vector
347 ;
348 comapi_getadv:
349 mov P_ES,ds
350 mov P_BX,adv0.data
351 mov P_CX,ADV_LEN
352 ret
354 ;
355 ; INT 22h AX=001Dh Write auxillary data vector
356 ;
357 comapi_writeadv equ adv_write
359 ;
360 ; INT 22h AX=0024h Cleanup, shuffle and boot raw
361 ;
362 comapi_shufraw:
363 %if IS_PXELINUX
364 ; Unload PXE if requested
365 test dl,3
366 setnz [KeepPXE]
367 sub bp,sp ; unload_pxe may move the stack around
368 pm_call unload_pxe
369 add bp,sp ; restore frame pointer...
370 %elif IS_SYSLINUX || IS_EXTLINUX
371 ; Restore original FDC table
372 mov eax,[OrigFDCTabPtr]
373 mov [fdctab],eax
374 %endif
375 pm_call cleanup_hardware
376 mov edi,P_EDI
377 mov esi,P_ESI
378 mov ecx,P_ECX
379 jmp shuffle_and_boot_raw
381 ;
382 ; INT 22h AX=0025h Initialize the ADV structure
383 ;
384 comapi_initadv:
385 call adv_init
386 ret
388 section .data16
390 alignz 2
391 int22_table:
392 dw comapi_err ; 0000 unimplemented syscall
393 dw comapi_err ; 0001 get SYSLINUX version
394 dw comapi_err ; 0002 write string
395 dw comapi_err ; 0003 run specified command
396 dw comapi_err ; 0004 run default command
397 dw comapi_err ; 0005 force text mode
398 dw comapi_err ; 0006 open file
399 dw comapi_err ; 0007 read file
400 dw comapi_err ; 0008 close file
401 dw comapi_err ; 0009 call PXE stack
402 dw comapi_err ; 000A derivative-specific info
403 dw comapi_err ; 000B get serial port config
404 dw comapi_err ; 000C perform final cleanup
405 dw comapi_err ; 000D clean up then bootstrap
406 dw comapi_err ; 000E get name of config file
407 dw comapi_err ; 000F get ipappend strings
408 dw comapi_err ; 0010 resolve hostname
409 dw comapi_err ; 0011 maximum shuffle descriptors
410 dw comapi_err ; 0012 cleanup, shuffle and boot
411 dw comapi_err ; 0013 idle call
412 dw comapi_err ; 0014 local boot
413 dw comapi_err ; 0015 feature flags
414 dw comapi_err ; 0016 run kernel image
415 dw comapi_err ; 0017 report video mode change
416 dw comapi_err ; 0018 query custom font
417 dw comapi_err ; 0019 read disk
418 dw comapi_err ; 001A cleanup, shuffle and boot to pm
419 dw comapi_err ; 001B cleanup, shuffle and boot to rm
420 dw comapi_getadv ; 001C get pointer to ADV
421 dw comapi_writeadv ; 001D write ADV to disk
422 dw comapi_err ; 001E keyboard remapping table
423 dw comapi_err ; 001F get current working directory
424 dw comapi_err ; 0020 open directory
425 dw comapi_err ; 0021 read directory
426 dw comapi_err ; 0022 close directory
427 dw comapi_err ; 0023 query shuffler size
428 dw comapi_shufraw ; 0024 cleanup, shuffle and boot raw
429 dw comapi_initadv ; 0025 initialize adv structure
430 int22_count equ ($-int22_table)/2
432 APIKeyWait db 0
433 APIKeyFlag db 0
435 zero_string db 0 ; Empty, null-terminated string
437 err_notdos db ': attempted DOS system call INT ',0
438 err_comlarge db 'COMBOOT image too large.', CR, LF, 0
440 section .bss16
441 alignb 4
442 DOSErrTramp resd 33 ; Error trampolines
444 %ifndef HAVE_CURRENTDIRNAME
445 global CurrentDirName:data hidden
446 CurrentDirName resb FILENAME_MAX
447 %endif