utils/Makefile.in

   1 # Makefile.in generated by automake 1.11.6 from Makefile.am.
   2 # @configure_input@
   3
   4 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
   5 # 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
   6 # Foundation, Inc.
   7 # This Makefile.in is free software; the Free Software Foundation
   8 # gives unlimited permission to copy and/or distribute it,
   9 # with or without modifications, as long as this notice is preserved.
  10
  11 # This program is distributed in the hope that it will be useful,
  12 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
  13 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
  14 # PARTICULAR PURPOSE.
  15
  16 @SET_MAKE@
  17 VPATH = @srcdir@
  18 am__make_dryrun = \
  19   { \
  20     am__dry=no; \
  21     case $$MAKEFLAGS in \
  22       *\\[\ \   ]*) \
  23         echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
  24           | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
  25       *) \
  26         for am__flg in $$MAKEFLAGS; do \
  27           case $$am__flg in \
  28             *=*|--*) ;; \
  29             *n*) am__dry=yes; break;; \
  30           esac; \
  31         done;; \
  32     esac; \
  33     test $$am__dry = yes; \
  34   }
  35 pkgdatadir = $(datadir)/@PACKAGE@
  36 pkgincludedir = $(includedir)/@PACKAGE@
  37 pkglibdir = $(libdir)/@PACKAGE@
  38 pkglibexecdir = $(libexecdir)/@PACKAGE@
  39 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
  40 install_sh_DATA = $(install_sh) -c -m 644
  41 install_sh_PROGRAM = $(install_sh) -c
  42 install_sh_SCRIPT = $(install_sh) -c
  43 INSTALL_HEADER = $(INSTALL_DATA)
  44 transform = $(program_transform_name)
  45 NORMAL_INSTALL = :
  46 PRE_INSTALL = :
  47 POST_INSTALL = :
  48 NORMAL_UNINSTALL = :
  49 PRE_UNINSTALL = :
  50 POST_UNINSTALL = :
  51 build_triplet = @build@
  52 host_triplet = @host@
  53 subdir = utils
  54 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
  55 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
  56 am__aclocal_m4_deps = $(top_srcdir)/m4/RSSH_CHECK_OMNIORB.m4 \
  57         $(top_srcdir)/m4/RSSH_CHECK_PTHREADS.m4 \
  58         $(top_srcdir)/m4/RSSH_CHECK_SUNPRO_CC.m4 \
  59         $(top_srcdir)/m4/RSSH_ENABLE_PTHREADS.m4 \
  60         $(top_srcdir)/m4/ac_cxx_have_class_strstream.m4 \
  61         $(top_srcdir)/m4/ac_cxx_have_sstream.m4 \
  62         $(top_srcdir)/m4/ac_cxx_namespaces.m4 \
  63         $(top_srcdir)/m4/ac_path_mariadb.m4 \
  64         $(top_srcdir)/m4/ac_path_mysqlclient.m4 \
  65         $(top_srcdir)/m4/ac_prog_mysql.m4 \
  66         $(top_srcdir)/m4/ax_cxx_compile_stdcxx_11.m4 \
  67         $(top_srcdir)/m4/check_zlib.m4 $(top_srcdir)/m4/gcc_release.m4 \
  68         $(top_srcdir)/m4/java_release.m4 $(top_srcdir)/m4/libtool.m4 \
  69         $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
  70         $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
  71         $(top_srcdir)/m4/mariadb_release.m4 \
  72         $(top_srcdir)/m4/mysql_release.m4 $(top_srcdir)/configure.ac
  73 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
  74         $(ACLOCAL_M4)
  75 mkinstalldirs = $(install_sh) -d
  76 CONFIG_HEADER = $(top_builddir)/ac_config.h.tmp
  77 CONFIG_CLEAN_FILES =
  78 CONFIG_CLEAN_VPATH_FILES =
  79 AM_V_GEN = $(am__v_GEN_@AM_V@)
  80 am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
  81 am__v_GEN_0 = @echo "  GEN   " $@;
  82 AM_V_at = $(am__v_at_@AM_V@)
  83 am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
  84 am__v_at_0 = @
  85 SOURCES =
  86 DIST_SOURCES =
  87 RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
  88         html-recursive info-recursive install-data-recursive \
  89         install-dvi-recursive install-exec-recursive \
  90         install-html-recursive install-info-recursive \
  91         install-pdf-recursive install-ps-recursive install-recursive \
  92         installcheck-recursive installdirs-recursive pdf-recursive \
  93         ps-recursive uninstall-recursive
  94 am__can_run_installinfo = \
  95   case $$AM_UPDATE_INFO_DIR in \
  96     n|no|NO) false;; \
  97     *) (install-info --version) >/dev/null 2>&1;; \
  98   esac
  99 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
 100   distclean-recursive maintainer-clean-recursive
 101 AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
 102         $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
 103         distdir
 104 ETAGS = etags
 105 CTAGS = ctags
 106 DIST_SUBDIRS = $(SUBDIRS)
 107 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 108 am__relativize = \
 109   dir0=`pwd`; \
 110   sed_first='s,^\([^/]*\)/.*$$,\1,'; \
 111   sed_rest='s,^[^/]*/*,,'; \
 112   sed_last='s,^.*/\([^/]*\)$$,\1,'; \
 113   sed_butlast='s,/*[^/]*$$,,'; \
 114   while test -n "$$dir1"; do \
 115     first=`echo "$$dir1" | sed -e "$$sed_first"`; \
 116     if test "$$first" != "."; then \
 117       if test "$$first" = ".."; then \
 118         dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
 119         dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
 120       else \
 121         first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
 122         if test "$$first2" = "$$first"; then \
 123           dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
 124         else \
 125           dir2="../$$dir2"; \
 126         fi; \
 127         dir0="$$dir0"/"$$first"; \
 128       fi; \
 129     fi; \
 130     dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
 131   done; \
 132   reldir="$$dir2"
 133 ACLOCAL = @ACLOCAL@
 134 ALLOCA = @ALLOCA@
 135 AMTAR = @AMTAR@
 136 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
 137 AR = @AR@
 138 AUTOCONF = @AUTOCONF@
 139 AUTOHEADER = @AUTOHEADER@
 140 AUTOMAKE = @AUTOMAKE@
 141 AWK = @AWK@
 142 CC = @CC@
 143 CCDEPMODE = @CCDEPMODE@
 144 CFLAGS = @CFLAGS@
 145 CORBA_INCLUDES = @CORBA_INCLUDES@
 146 CPP = @CPP@
 147 CPPFLAGS = @CPPFLAGS@
 148 CPP_ELEVEN = @CPP_ELEVEN@
 149 CXX = @CXX@
 150 CXXCPP = @CXXCPP@
 151 CXXDEPMODE = @CXXDEPMODE@
 152 CXXFLAGS = @CXXFLAGS@
 153 CYGPATH_W = @CYGPATH_W@
 154 DATADIR = @DATADIR@
 155 DB_CFLAGS = @DB_CFLAGS@
 156 DB_LDFLAGS = @DB_LDFLAGS@
 157 DB_LDLIBS = @DB_LDLIBS@
 158 DEFS = @DEFS@
 159 DEPDIR = @DEPDIR@
 160 DLLTOOL = @DLLTOOL@
 161 DOXYGEN = @DOXYGEN@
 162 DSYMUTIL = @DSYMUTIL@
 163 DUMPBIN = @DUMPBIN@
 164 ECHO_C = @ECHO_C@
 165 ECHO_N = @ECHO_N@
 166 ECHO_T = @ECHO_T@
 167 EGREP = @EGREP@
 168 EXEEXT = @EXEEXT@
 169 FGREP = @FGREP@
 170 FIG2DEV = @FIG2DEV@
 171 GREP = @GREP@
 172 HAVE_CXX11 = @HAVE_CXX11@
 173 HAVE_ORB_IDL = @HAVE_ORB_IDL@
 174 IDL = @IDL@
 175 IDLCXX = @IDLCXX@
 176 IDLCXXFLAGS = @IDLCXXFLAGS@
 177 IDLFLAGS = @IDLFLAGS@
 178 IDL_CLN_CPP = @IDL_CLN_CPP@
 179 IDL_CLN_CPP_SUFFIX = @IDL_CLN_CPP_SUFFIX@
 180 IDL_CLN_H = @IDL_CLN_H@
 181 IDL_CLN_H1_SUFFIX = @IDL_CLN_H1_SUFFIX@
 182 IDL_CLN_H_SUFFIX = @IDL_CLN_H_SUFFIX@
 183 IDL_CLN_O = @IDL_CLN_O@
 184 IDL_CLN_OBJ_SUFFIX = @IDL_CLN_OBJ_SUFFIX@
 185 IDL_H1_SUFFIX = @IDL_H1_SUFFIX@
 186 IDL_H_SUFFIX = @IDL_H_SUFFIX@
 187 IDL_SRV_CPP = @IDL_SRV_CPP@
 188 IDL_SRV_CPP_SUFFIX = @IDL_SRV_CPP_SUFFIX@
 189 IDL_SRV_H = @IDL_SRV_H@
 190 IDL_SRV_H1_SUFFIX = @IDL_SRV_H1_SUFFIX@
 191 IDL_SRV_H_SUFFIX = @IDL_SRV_H_SUFFIX@
 192 IDL_SRV_O = @IDL_SRV_O@
 193 IDL_SRV_OBJ_SUFFIX = @IDL_SRV_OBJ_SUFFIX@
 194 IDL_TIE_CPP_SUFFIX = @IDL_TIE_CPP_SUFFIX@
 195 IDL_TIE_H1_SUFFIX = @IDL_TIE_H1_SUFFIX@
 196 IDL_TIE_H_SUFFIX = @IDL_TIE_H_SUFFIX@
 197 INSTALL = @INSTALL@
 198 INSTALL_DATA = @INSTALL_DATA@
 199 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 200 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 201 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 202 JAVA = @JAVA@
 203 JNI_INCL_DIRS = @JNI_INCL_DIRS@
 204 JPEG_LIB_CXXFLAGS = @JPEG_LIB_CXXFLAGS@
 205 JPEG_MMX_LIB_CXXFLAGS = @JPEG_MMX_LIB_CXXFLAGS@
 206 LD = @LD@
 207 LDFLAGS = @LDFLAGS@
 208 LIBOBJS = @LIBOBJS@
 209 LIBS = @LIBS@
 210 LIBTOOL = @LIBTOOL@
 211 LIBZMQ_CFLAGS = @LIBZMQ_CFLAGS@
 212 LIBZMQ_LIBS = @LIBZMQ_LIBS@
 213 LIPO = @LIPO@
 214 LN_S = @LN_S@
 215 LTLIBOBJS = @LTLIBOBJS@
 216 LYX = @LYX@
 217 MAINT = @MAINT@
 218 MAKEINFO = @MAKEINFO@
 219 MANIFEST_TOOL = @MANIFEST_TOOL@
 220 MARIADBCLIENT_CFLAGS = @MARIADBCLIENT_CFLAGS@
 221 MARIADBCLIENT_LDFLAGS = @MARIADBCLIENT_LDFLAGS@
 222 MARIADBCLIENT_LIBS = @MARIADBCLIENT_LIBS@
 223 MKDIR_P = @MKDIR_P@
 224 MYSQL = @MYSQL@
 225 MYSQLCLIENT_CFLAGS = @MYSQLCLIENT_CFLAGS@
 226 MYSQLCLIENT_LDFLAGS = @MYSQLCLIENT_LDFLAGS@
 227 MYSQLCLIENT_LIBS = @MYSQLCLIENT_LIBS@
 228 MYSQL_ADMIN = @MYSQL_ADMIN@
 229 MYSQL_ADMIN_PASSWD = @MYSQL_ADMIN_PASSWD@
 230 MYSQL_HOST = @MYSQL_HOST@
 231 NM = @NM@
 232 NMEDIT = @NMEDIT@
 233 OBJDUMP = @OBJDUMP@
 234 OBJEXT = @OBJEXT@
 235 ORB = @ORB@
 236 ORB_COSNAMING_LIB = @ORB_COSNAMING_LIB@
 237 ORB_INCLUDE_PREFIX = @ORB_INCLUDE_PREFIX@
 238 ORB_PREFIX = @ORB_PREFIX@
 239 OTOOL = @OTOOL@
 240 OTOOL64 = @OTOOL64@
 241 PACKAGE = @PACKAGE@
 242 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 243 PACKAGE_NAME = @PACKAGE_NAME@
 244 PACKAGE_STRING = @PACKAGE_STRING@
 245 PACKAGE_TARNAME = @PACKAGE_TARNAME@
 246 PACKAGE_URL = @PACKAGE_URL@
 247 PACKAGE_VERSION = @PACKAGE_VERSION@
 248 PATH_SEPARATOR = @PATH_SEPARATOR@
 249 PKG_CONFIG = @PKG_CONFIG@
 250 PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
 251 PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
 252 RANLIB = @RANLIB@
 253 SED = @SED@
 254 SET_MAKE = @SET_MAKE@
 255 SHELL = @SHELL@
 256 STRIP = @STRIP@
 257 TANGO_DB_NAME = @TANGO_DB_NAME@
 258 TANGO_RC_FILE = @TANGO_RC_FILE@
 259 VERSION = @VERSION@
 260 VERSION_INFO = @VERSION_INFO@
 261 ZLIB_CPPFLAGS = @ZLIB_CPPFLAGS@
 262 ZLIB_LDFLAGS = @ZLIB_LDFLAGS@
 263 ZLIB_LIBS = @ZLIB_LIBS@
 264 ZMQ_PREFIX = @ZMQ_PREFIX@
 265 abs_builddir = @abs_builddir@
 266 abs_srcdir = @abs_srcdir@
 267 abs_top_builddir = @abs_top_builddir@
 268 abs_top_srcdir = @abs_top_srcdir@
 269 ac_aux_dir = @ac_aux_dir@
 270 ac_ct_AR = @ac_ct_AR@
 271 ac_ct_CC = @ac_ct_CC@
 272 ac_ct_CXX = @ac_ct_CXX@
 273 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 274 am__include = @am__include@
 275 am__leading_dot = @am__leading_dot@
 276 am__quote = @am__quote@
 277 am__tar = @am__tar@
 278 am__untar = @am__untar@
 279 bindir = @bindir@
 280 build = @build@
 281 build_alias = @build_alias@
 282 build_cpu = @build_cpu@
 283 build_os = @build_os@
 284 build_vendor = @build_vendor@
 285 builddir = @builddir@
 286 datadir = @datadir@
 287 datarootdir = @datarootdir@
 288 docdir = @docdir@
 289 dvidir = @dvidir@
 290 exec_prefix = @exec_prefix@
 291 host = @host@
 292 host_alias = @host_alias@
 293 host_cpu = @host_cpu@
 294 host_os = @host_os@
 295 host_vendor = @host_vendor@
 296 htmldir = @htmldir@
 297 includedir = @includedir@
 298 infodir = @infodir@
 299 install_sh = @install_sh@
 300 libdir = @libdir@
 301 libexecdir = @libexecdir@
 302 localedir = @localedir@
 303 localstatedir = @localstatedir@
 304 mandir = @mandir@
 305 mkdir_p = @mkdir_p@
 306 oldincludedir = @oldincludedir@
 307 omniCOS4_CFLAGS = @omniCOS4_CFLAGS@
 308 omniCOS4_LIBS = @omniCOS4_LIBS@
 309 omniORB4_CFLAGS = @omniORB4_CFLAGS@
 310 omniORB4_LIBS = @omniORB4_LIBS@
 311 pdfdir = @pdfdir@
 312 prefix = @prefix@
 313 program_transform_name = @program_transform_name@
 314 psdir = @psdir@
 315 sbindir = @sbindir@
 316 sharedstatedir = @sharedstatedir@
 317 srcdir = @srcdir@
 318 subdirs = @subdirs@
 319 sysconfdir = @sysconfdir@
 320 target_alias = @target_alias@
 321 top_build_prefix = @top_build_prefix@
 322 top_builddir = @top_builddir@
 323 top_srcdir = @top_srcdir@
 324 SUBDIRS = tango_admin
 325 all: all-recursive
 326
 327 .SUFFIXES:
 328 $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
 329         @for dep in $?; do \
 330           case '$(am__configure_deps)' in \
 331             *$$dep*) \
 332               ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
 333                 && { if test -f $@; then exit 0; else break; fi; }; \
 334               exit 1;; \
 335           esac; \
 336         done; \
 337         echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu utils/Makefile'; \
 338         $(am__cd) $(top_srcdir) && \
 339           $(AUTOMAKE) --gnu utils/Makefile
 340 .PRECIOUS: Makefile
 341 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 342         @case '$?' in \
 343           *config.status*) \
 344             cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
 345           *) \
 346             echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
 347             cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
 348         esac;
 349
 350 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 351         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 352
 353 $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 354         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 355 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 356         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 357 $(am__aclocal_m4_deps):
 358
 359 mostlyclean-libtool:
 360         -rm -f *.lo
 361
 362 clean-libtool:
 363         -rm -rf .libs _libs
 364
 365 # This directory's subdirectories are mostly independent; you can cd
 366 # into them and run `make' without going through this Makefile.
 367 # To change the values of `make' variables: instead of editing Makefiles,
 368 # (1) if the variable is set in `config.status', edit `config.status'
 369 #     (which will cause the Makefiles to be regenerated when you run `make');
 370 # (2) otherwise, pass the desired values on the `make' command line.
 371 $(RECURSIVE_TARGETS):
 372         @fail= failcom='exit 1'; \
 373         for f in x $$MAKEFLAGS; do \
 374           case $$f in \
 375             *=* | --[!k]*);; \
 376             *k*) failcom='fail=yes';; \
 377           esac; \
 378         done; \
 379         dot_seen=no; \
 380         target=`echo $@ | sed s/-recursive//`; \
 381         list='$(SUBDIRS)'; for subdir in $$list; do \
 382           echo "Making $$target in $$subdir"; \
 383           if test "$$subdir" = "."; then \
 384             dot_seen=yes; \
 385             local_target="$$target-am"; \
 386           else \
 387             local_target="$$target"; \
 388           fi; \
 389           ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 390           || eval $$failcom; \
 391         done; \
 392         if test "$$dot_seen" = "no"; then \
 393           $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
 394         fi; test -z "$$fail"
 395
 396 $(RECURSIVE_CLEAN_TARGETS):
 397         @fail= failcom='exit 1'; \
 398         for f in x $$MAKEFLAGS; do \
 399           case $$f in \
 400             *=* | --[!k]*);; \
 401             *k*) failcom='fail=yes';; \
 402           esac; \
 403         done; \
 404         dot_seen=no; \
 405         case "$@" in \
 406           distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
 407           *) list='$(SUBDIRS)' ;; \
 408         esac; \
 409         rev=''; for subdir in $$list; do \
 410           if test "$$subdir" = "."; then :; else \
 411             rev="$$subdir $$rev"; \
 412           fi; \
 413         done; \
 414         rev="$$rev ."; \
 415         target=`echo $@ | sed s/-recursive//`; \
 416         for subdir in $$rev; do \
 417           echo "Making $$target in $$subdir"; \
 418           if test "$$subdir" = "."; then \
 419             local_target="$$target-am"; \
 420           else \
 421             local_target="$$target"; \
 422           fi; \
 423           ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 424           || eval $$failcom; \
 425         done && test -z "$$fail"
 426 tags-recursive:
 427         list='$(SUBDIRS)'; for subdir in $$list; do \
 428           test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
 429         done
 430 ctags-recursive:
 431         list='$(SUBDIRS)'; for subdir in $$list; do \
 432           test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
 433         done
 434
 435 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 436         list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
 437         unique=`for i in $$list; do \
 438             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 439           done | \
 440           $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 441               END { if (nonempty) { for (i in files) print i; }; }'`; \
 442         mkid -fID $$unique
 443 tags: TAGS
 444
 445 TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 446                 $(TAGS_FILES) $(LISP)
 447         set x; \
 448         here=`pwd`; \
 449         if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
 450           include_option=--etags-include; \
 451           empty_fix=.; \
 452         else \
 453           include_option=--include; \
 454           empty_fix=; \
 455         fi; \
 456         list='$(SUBDIRS)'; for subdir in $$list; do \
 457           if test "$$subdir" = .; then :; else \
 458             test ! -f $$subdir/TAGS || \
 459               set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
 460           fi; \
 461         done; \
 462         list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 463         unique=`for i in $$list; do \
 464             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 465           done | \
 466           $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 467               END { if (nonempty) { for (i in files) print i; }; }'`; \
 468         shift; \
 469         if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 470           test -n "$$unique" || unique=$$empty_fix; \
 471           if test $$# -gt 0; then \
 472             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 473               "$$@" $$unique; \
 474           else \
 475             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 476               $$unique; \
 477           fi; \
 478         fi
 479 ctags: CTAGS
 480 CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 481                 $(TAGS_FILES) $(LISP)
 482         list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 483         unique=`for i in $$list; do \
 484             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 485           done | \
 486           $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 487               END { if (nonempty) { for (i in files) print i; }; }'`; \
 488         test -z "$(CTAGS_ARGS)$$unique" \
 489           || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
 490              $$unique
 491
 492 GTAGS:
 493         here=`$(am__cd) $(top_builddir) && pwd` \
 494           && $(am__cd) $(top_srcdir) \
 495           && gtags -i $(GTAGS_ARGS) "$$here"
 496
 497 distclean-tags:
 498         -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 499
 500 distdir: $(DISTFILES)
 501         @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 502         topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 503         list='$(DISTFILES)'; \
 504           dist_files=`for file in $$list; do echo $$file; done | \
 505           sed -e "s|^$$srcdirstrip/||;t" \
 506               -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
 507         case $$dist_files in \
 508           */*) $(MKDIR_P) `echo "$$dist_files" | \
 509                            sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
 510                            sort -u` ;; \
 511         esac; \
 512         for file in $$dist_files; do \
 513           if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 514           if test -d $$d/$$file; then \
 515             dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
 516             if test -d "$(distdir)/$$file"; then \
 517               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 518             fi; \
 519             if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
 520               cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
 521               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 522             fi; \
 523             cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 524           else \
 525             test -f "$(distdir)/$$file" \
 526             || cp -p $$d/$$file "$(distdir)/$$file" \
 527             || exit 1; \
 528           fi; \
 529         done
 530         @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 531           if test "$$subdir" = .; then :; else \
 532             $(am__make_dryrun) \
 533               || test -d "$(distdir)/$$subdir" \
 534               || $(MKDIR_P) "$(distdir)/$$subdir" \
 535               || exit 1; \
 536             dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
 537             $(am__relativize); \
 538             new_distdir=$$reldir; \
 539             dir1=$$subdir; dir2="$(top_distdir)"; \
 540             $(am__relativize); \
 541             new_top_distdir=$$reldir; \
 542             echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
 543             echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
 544             ($(am__cd) $$subdir && \
 545               $(MAKE) $(AM_MAKEFLAGS) \
 546                 top_distdir="$$new_top_distdir" \
 547                 distdir="$$new_distdir" \
 548                 am__remove_distdir=: \
 549                 am__skip_length_check=: \
 550                 am__skip_mode_fix=: \
 551                 distdir) \
 552               || exit 1; \
 553           fi; \
 554         done
 555 check-am: all-am
 556 check: check-recursive
 557 all-am: Makefile
 558 installdirs: installdirs-recursive
 559 installdirs-am:
 560 install: install-recursive
 561 install-exec: install-exec-recursive
 562 install-data: install-data-recursive
 563 uninstall: uninstall-recursive
 564
 565 install-am: all-am
 566         @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
 567
 568 installcheck: installcheck-recursive
 569 install-strip:
 570         if test -z '$(STRIP)'; then \
 571           $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 572             install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 573               install; \
 574         else \
 575           $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 576             install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 577             "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
 578         fi
 579 mostlyclean-generic:
 580
 581 clean-generic:
 582
 583 distclean-generic:
 584         -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
 585         -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 586
 587 maintainer-clean-generic:
 588         @echo "This command is intended for maintainers to use"
 589         @echo "it deletes files that may require special tools to rebuild."
 590 clean: clean-recursive
 591
 592 clean-am: clean-generic clean-libtool mostlyclean-am
 593
 594 distclean: distclean-recursive
 595         -rm -f Makefile
 596 distclean-am: clean-am distclean-generic distclean-tags
 597
 598 dvi: dvi-recursive
 599
 600 dvi-am:
 601
 602 html: html-recursive
 603
 604 html-am:
 605
 606 info: info-recursive
 607
 608 info-am:
 609
 610 install-data-am:
 611
 612 install-dvi: install-dvi-recursive
 613
 614 install-dvi-am:
 615
 616 install-exec-am:
 617
 618 install-html: install-html-recursive
 619
 620 install-html-am:
 621
 622 install-info: install-info-recursive
 623
 624 install-info-am:
 625
 626 install-man:
 627
 628 install-pdf: install-pdf-recursive
 629
 630 install-pdf-am:
 631
 632 install-ps: install-ps-recursive
 633
 634 install-ps-am:
 635
 636 installcheck-am:
 637
 638 maintainer-clean: maintainer-clean-recursive
 639         -rm -f Makefile
 640 maintainer-clean-am: distclean-am maintainer-clean-generic
 641
 642 mostlyclean: mostlyclean-recursive
 643
 644 mostlyclean-am: mostlyclean-generic mostlyclean-libtool
 645
 646 pdf: pdf-recursive
 647
 648 pdf-am:
 649
 650 ps: ps-recursive
 651
 652 ps-am:
 653
 654 uninstall-am:
 655
 656 .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
 657         install-am install-strip tags-recursive
 658
 659 .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
 660         all all-am check check-am clean clean-generic clean-libtool \
 661         ctags ctags-recursive distclean distclean-generic \
 662         distclean-libtool distclean-tags distdir dvi dvi-am html \
 663         html-am info info-am install install-am install-data \
 664         install-data-am install-dvi install-dvi-am install-exec \
 665         install-exec-am install-html install-html-am install-info \
 666         install-info-am install-man install-pdf install-pdf-am \
 667         install-ps install-ps-am install-strip installcheck \
 668         installcheck-am installdirs installdirs-am maintainer-clean \
 669         maintainer-clean-generic mostlyclean mostlyclean-generic \
 670         mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
 671         uninstall uninstall-am
 672
 673
 674 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 675 # Otherwise a system limit (for SysV at least) may be exceeded.
 676 .NOEXPORT: