1 <section id="FE_GET_PROPERTY">
2 <title>FE_GET_PROPERTY/FE_SET_PROPERTY</title>
5 <title>ISDB-T frontend</title>
6 <para>This section describes shortly what are the possible parameters in the Linux
7 DVB-API called "S2API" and now DVB API 5 in order to tune an ISDB-T/ISDB-Tsb
10 <para>This ISDB-T/ISDB-Tsb API extension should reflect all information
11 needed to tune any ISDB-T/ISDB-Tsb hardware. Of course it is possible
12 that some very sophisticated devices won't need certain parameters to
15 <para>The information given here should help application writers to know how
16 to handle ISDB-T and ISDB-Tsb hardware using the Linux DVB-API.</para>
18 <para>The details given here about ISDB-T and ISDB-Tsb are just enough to
19 basically show the dependencies between the needed parameter values,
20 but surely some information is left out. For more detailed information
21 see the following documents:</para>
23 <para>ARIB STD-B31 - "Transmission System for Digital Terrestrial
24 Television Broadcasting" and</para>
25 <para>ARIB TR-B14 - "Operational Guidelines for Digital Terrestrial
26 Television Broadcasting".</para>
28 <para>In order to read this document one has to have some knowledge the
29 channel structure in ISDB-T and ISDB-Tsb. I.e. it has to be known to
30 the reader that an ISDB-T channel consists of 13 segments, that it can
31 have up to 3 layer sharing those segments, and things like that.</para>
33 <para>Parameters used by ISDB-T and ISDB-Tsb.</para>
35 <section id="isdbt-parms">
36 <title>Parameters that are common with DVB-T and ATSC</title>
38 <section id="isdbt-freq">
39 <title><constant>DTV_FREQUENCY</constant></title>
41 <para>Central frequency of the channel.</para>
43 <para>For ISDB-T the channels are usally transmitted with an offset of 143kHz. E.g. a
44 valid frequncy could be 474143 kHz. The stepping is bound to the bandwidth of
45 the channel which is 6MHz.</para>
47 <para>As in ISDB-Tsb the channel consists of only one or three segments the
48 frequency step is 429kHz, 3*429 respectively. As for ISDB-T the
49 central frequency of the channel is expected.</para>
52 <section id="isdbt-bw">
53 <title><constant>DTV_BANDWIDTH_HZ</constant> (optional)</title>
55 <para>Possible values:</para>
57 <para>For ISDB-T it should be always 6000000Hz (6MHz)</para>
58 <para>For ISDB-Tsb it can vary depending on the number of connected segments</para>
60 <para>Note: Hardware specific values might be given here, but standard
61 applications should not bother to set a value to this field as
62 standard demods are ignoring it anyway.</para>
64 <para>Bandwidth in ISDB-T is fixed (6MHz) or can be easily derived from
65 other parameters (DTV_ISDBT_SB_SEGMENT_IDX,
66 DTV_ISDBT_SB_SEGMENT_COUNT).</para>
69 <section id="isdbt-delivery-sys">
70 <title><constant>DTV_DELIVERY_SYSTEM</constant></title>
72 <para>Possible values: <constant>SYS_ISDBT</constant></para>
75 <section id="isdbt-tx-mode">
76 <title><constant>DTV_TRANSMISSION_MODE</constant></title>
78 <para>ISDB-T supports three carrier/symbol-size: 8K, 4K, 2K. It is called
79 'mode' in the standard: Mode 1 is 2K, mode 2 is 4K, mode 3 is 8K</para>
81 <para>Possible values: <constant>TRANSMISSION_MODE_2K</constant>, <constant>TRANSMISSION_MODE_8K</constant>,
82 <constant>TRANSMISSION_MODE_AUTO</constant>, <constant>TRANSMISSION_MODE_4K</constant></para>
84 <para>If <constant>DTV_TRANSMISSION_MODE</constant> is set the <constant>TRANSMISSION_MODE_AUTO</constant> the
85 hardware will try to find the correct FFT-size (if capable) and will
86 use TMCC to fill in the missing parameters.</para>
88 <para><constant>TRANSMISSION_MODE_4K</constant> is added at the same time as the other new parameters.</para>
91 <section id="isdbt-guard-interval">
92 <title><constant>DTV_GUARD_INTERVAL</constant></title>
94 <para>Possible values: <constant>GUARD_INTERVAL_1_32</constant>, <constant>GUARD_INTERVAL_1_16</constant>, <constant>GUARD_INTERVAL_1_8</constant>,
95 <constant>GUARD_INTERVAL_1_4</constant>, <constant>GUARD_INTERVAL_AUTO</constant></para>
97 <para>If <constant>DTV_GUARD_INTERVAL</constant> is set the <constant>GUARD_INTERVAL_AUTO</constant> the hardware will
98 try to find the correct guard interval (if capable) and will use TMCC to fill
99 in the missing parameters.</para>
102 <section id="isdbt-new-parms">
103 <title>ISDB-T only parameters</title>
105 <section id="isdbt-part-rec">
106 <title><constant>DTV_ISDBT_PARTIAL_RECEPTION</constant></title>
108 <para><constant>If DTV_ISDBT_SOUND_BROADCASTING</constant> is '0' this bit-field represents whether
109 the channel is in partial reception mode or not.</para>
111 <para>If '1' <constant>DTV_ISDBT_LAYERA_*</constant> values are assigned to the center segment and
112 <constant>DTV_ISDBT_LAYERA_SEGMENT_COUNT</constant> has to be '1'.</para>
114 <para>If in addition <constant>DTV_ISDBT_SOUND_BROADCASTING</constant> is '1'
115 <constant>DTV_ISDBT_PARTIAL_RECEPTION</constant> represents whether this ISDB-Tsb channel
116 is consisting of one segment and layer or three segments and two layers.</para>
118 <para>Possible values: 0, 1, -1 (AUTO)</para>
121 <section id="isdbt-sound-bcast">
122 <title><constant>DTV_ISDBT_SOUND_BROADCASTING</constant></title>
124 <para>This field represents whether the other DTV_ISDBT_*-parameters are
125 referring to an ISDB-T and an ISDB-Tsb channel. (See also
126 <constant>DTV_ISDBT_PARTIAL_RECEPTION</constant>).</para>
128 <para>Possible values: 0, 1, -1 (AUTO)</para>
131 <section id="isdbt-sb-ch-id">
132 <title><constant>DTV_ISDBT_SB_SUBCHANNEL_ID</constant></title>
134 <para>This field only applies if <constant>DTV_ISDBT_SOUND_BROADCASTING</constant> is '1'.</para>
136 <para>(Note of the author: This might not be the correct description of the
137 <constant>SUBCHANNEL-ID</constant> in all details, but it is my understanding of the technical
138 background needed to program a device)</para>
140 <para>An ISDB-Tsb channel (1 or 3 segments) can be broadcasted alone or in a
141 set of connected ISDB-Tsb channels. In this set of channels every
142 channel can be received independently. The number of connected
143 ISDB-Tsb segment can vary, e.g. depending on the frequency spectrum
144 bandwidth available.</para>
146 <para>Example: Assume 8 ISDB-Tsb connected segments are broadcasted. The
147 broadcaster has several possibilities to put those channels in the
148 air: Assuming a normal 13-segment ISDB-T spectrum he can align the 8
149 segments from position 1-8 to 5-13 or anything in between.</para>
151 <para>The underlying layer of segments are subchannels: each segment is
152 consisting of several subchannels with a predefined IDs. A sub-channel
153 is used to help the demodulator to synchronize on the channel.</para>
155 <para>An ISDB-T channel is always centered over all sub-channels. As for
156 the example above, in ISDB-Tsb it is no longer as simple as that.</para>
158 <para><constant>The DTV_ISDBT_SB_SUBCHANNEL_ID</constant> parameter is used to give the
159 sub-channel ID of the segment to be demodulated.</para>
161 <para>Possible values: 0 .. 41, -1 (AUTO)</para>
164 <section id="isdbt-sb-seg-idx">
166 <title><constant>DTV_ISDBT_SB_SEGMENT_IDX</constant></title>
168 <para>This field only applies if <constant>DTV_ISDBT_SOUND_BROADCASTING</constant> is '1'.</para>
170 <para><constant>DTV_ISDBT_SB_SEGMENT_IDX</constant> gives the index of the segment to be
171 demodulated for an ISDB-Tsb channel where several of them are
172 transmitted in the connected manner.</para>
174 <para>Possible values: 0 .. <constant>DTV_ISDBT_SB_SEGMENT_COUNT</constant> - 1</para>
176 <para>Note: This value cannot be determined by an automatic channel search.</para>
179 <section id="isdbt-sb-seg-cnt">
180 <title><constant>DTV_ISDBT_SB_SEGMENT_COUNT</constant></title>
182 <para>This field only applies if <constant>DTV_ISDBT_SOUND_BROADCASTING</constant> is '1'.</para>
184 <para><constant>DTV_ISDBT_SB_SEGMENT_COUNT</constant> gives the total count of connected ISDB-Tsb
187 <para>Possible values: 1 .. 13</para>
189 <para>Note: This value cannot be determined by an automatic channel search.</para>
192 <section id="isdb-hierq-layers">
193 <title>Hierarchical layers</title>
195 <para>ISDB-T channels can be coded hierarchically. As opposed to DVB-T in
196 ISDB-T hierarchical layers can be decoded simultaneously. For that
197 reason a ISDB-T demodulator has 3 viterbi and 3 reed-solomon-decoders.</para>
199 <para>ISDB-T has 3 hierarchical layers which each can use a part of the
200 available segments. The total number of segments over all layers has
201 to 13 in ISDB-T.</para>
203 <section id="isdbt-layer-ena">
204 <title><constant>DTV_ISDBT_LAYER_ENABLED</constant></title>
206 <para>Hierarchical reception in ISDB-T is achieved by enabling or disabling
207 layers in the decoding process. Setting all bits of
208 <constant>DTV_ISDBT_LAYER_ENABLED</constant> to '1' forces all layers (if applicable) to be
209 demodulated. This is the default.</para>
211 <para>If the channel is in the partial reception mode
212 (<constant>DTV_ISDBT_PARTIAL_RECEPTION</constant> = 1) the central segment can be decoded
213 independently of the other 12 segments. In that mode layer A has to
214 have a <constant>SEGMENT_COUNT</constant> of 1.</para>
216 <para>In ISDB-Tsb only layer A is used, it can be 1 or 3 in ISDB-Tsb
217 according to <constant>DTV_ISDBT_PARTIAL_RECEPTION</constant>. <constant>SEGMENT_COUNT</constant> must be filled
220 <para>Possible values: 0x1, 0x2, 0x4 (|-able)</para>
222 <para><constant>DTV_ISDBT_LAYER_ENABLED[0:0]</constant> - layer A</para>
223 <para><constant>DTV_ISDBT_LAYER_ENABLED[1:1]</constant> - layer B</para>
224 <para><constant>DTV_ISDBT_LAYER_ENABLED[2:2]</constant> - layer C</para>
225 <para><constant>DTV_ISDBT_LAYER_ENABLED[31:3]</constant> unused</para>
228 <section id="isdbt-layer-fec">
229 <title><constant>DTV_ISDBT_LAYER*_FEC</constant></title>
231 <para>Possible values: <constant>FEC_AUTO</constant>, <constant>FEC_1_2</constant>, <constant>FEC_2_3</constant>, <constant>FEC_3_4</constant>, <constant>FEC_5_6</constant>, <constant>FEC_7_8</constant></para>
234 <section id="isdbt-layer-mod">
235 <title><constant>DTV_ISDBT_LAYER*_MODULATION</constant></title>
237 <para>Possible values: <constant>QAM_AUTO</constant>, QP<constant>SK, QAM_16</constant>, <constant>QAM_64</constant>, <constant>DQPSK</constant></para>
239 <para>Note: If layer C is <constant>DQPSK</constant> layer B has to be <constant>DQPSK</constant>. If layer B is <constant>DQPSK</constant>
240 and <constant>DTV_ISDBT_PARTIAL_RECEPTION</constant>=0 layer has to be <constant>DQPSK</constant>.</para>
243 <section id="isdbt-layer-seg-cnt">
244 <title><constant>DTV_ISDBT_LAYER*_SEGMENT_COUNT</constant></title>
246 <para>Possible values: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, -1 (AUTO)</para>
248 <para>Note: Truth table for <constant>DTV_ISDBT_SOUND_BROADCASTING</constant> and
249 <constant>DTV_ISDBT_PARTIAL_RECEPTION</constant> and <constant>LAYER</constant>*_SEGMENT_COUNT</para>
251 <informaltable id="isdbt-layer_seg-cnt-table">
258 <entry>Layer A width</entry>
259 <entry>Layer B width</entry>
260 <entry>Layer C width</entry>
261 <entry>total width</entry>
267 <entry>1 .. 13</entry>
268 <entry>1 .. 13</entry>
269 <entry>1 .. 13</entry>
277 <entry>1 .. 13</entry>
278 <entry>1 .. 13</entry>
306 <section id="isdbt_layer_t_interl">
307 <title><constant>DTV_ISDBT_LAYER*_TIME_INTERLEAVING</constant></title>
309 <para>Possible values: 0, 1, 2, 3, -1 (AUTO)</para>
311 <para>Note: The real inter-leaver depth-names depend on the mode (fft-size); the values
312 here are referring to what can be found in the TMCC-structure -
313 independent of the mode.</para>