arch/arm/mach-s3c2410/pm.c

   1 /* linux/arch/arm/mach-s3c2410/pm.c
   2  *
   3  * Copyright (c) 2006 Simtec Electronics
   4  *      Ben Dooks <ben@simtec.co.uk>
   5  *
   6  * S3C2410 (and compatible) Power Manager (Suspend-To-RAM) support
   7  *
   8  * This program is free software; you can redistribute it and/or modify
   9  * it under the terms of the GNU General Public License as published by
  10  * the Free Software Foundation; either version 2 of the License, or
  11  * (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  21 */
  22
  23 #include <linux/init.h>
  24 #include <linux/suspend.h>
  25 #include <linux/errno.h>
  26 #include <linux/time.h>
  27 #include <linux/sysdev.h>
  28 #include <linux/gpio.h>
  29 #include <linux/io.h>
  30
  31 #include <mach/hardware.h>
  32
  33 #include <asm/mach-types.h>
  34
  35 #include <mach/regs-gpio.h>
  36 #include <mach/h1940.h>
  37
  38 #include <plat/cpu.h>
  39 #include <plat/pm.h>
  40
  41 static void s3c2410_pm_prepare(void)
  42 {
  43         /* ensure at least GSTATUS3 has the resume address */
  44
  45         __raw_writel(virt_to_phys(s3c_cpu_resume), S3C2410_GSTATUS3);
  46
  47         S3C_PMDBG("GSTATUS3 0x%08x\n", __raw_readl(S3C2410_GSTATUS3));
  48         S3C_PMDBG("GSTATUS4 0x%08x\n", __raw_readl(S3C2410_GSTATUS4));
  49
  50         if (machine_is_h1940()) {
  51                 void *base = phys_to_virt(H1940_SUSPEND_CHECK);
  52                 unsigned long ptr;
  53                 unsigned long calc = 0;
  54
  55                 /* generate check for the bootloader to check on resume */
  56
  57                 for (ptr = 0; ptr < 0x40000; ptr += 0x400)
  58                         calc += __raw_readl(base+ptr);
  59
  60                 __raw_writel(calc, phys_to_virt(H1940_SUSPEND_CHECKSUM));
  61         }
  62
  63         /* RX3715 and RX1950 use similar to H1940 code and the
  64          * same offsets for resume and checksum pointers */
  65
  66         if (machine_is_rx3715() || machine_is_rx1950()) {
  67                 void *base = phys_to_virt(H1940_SUSPEND_CHECK);
  68                 unsigned long ptr;
  69                 unsigned long calc = 0;
  70
  71                 /* generate check for the bootloader to check on resume */
  72
  73                 for (ptr = 0; ptr < 0x40000; ptr += 0x4)
  74                         calc += __raw_readl(base+ptr);
  75
  76                 __raw_writel(calc, phys_to_virt(H1940_SUSPEND_CHECKSUM));
  77         }
  78
  79         if ( machine_is_aml_m5900() )
  80                 s3c2410_gpio_setpin(S3C2410_GPF(2), 1);
  81
  82         if (machine_is_rx1950()) {
  83                 /* According to S3C2442 user's manual, page 7-17,
  84                  * when the system is operating in NAND boot mode,
  85                  * the hardware pin configuration - EINT[23:21] –
  86                  * must be set as input for starting up after
  87                  * wakeup from sleep mode
  88                  */
  89                 s3c_gpio_cfgpin(S3C2410_GPG(13), S3C2410_GPIO_INPUT);
  90                 s3c_gpio_cfgpin(S3C2410_GPG(14), S3C2410_GPIO_INPUT);
  91                 s3c_gpio_cfgpin(S3C2410_GPG(15), S3C2410_GPIO_INPUT);
  92         }
  93 }
  94
  95 static int s3c2410_pm_resume(struct sys_device *dev)
  96 {
  97         unsigned long tmp;
  98
  99         /* unset the return-from-sleep flag, to ensure reset */
 100
 101         tmp = __raw_readl(S3C2410_GSTATUS2);
 102         tmp &= S3C2410_GSTATUS2_OFFRESET;
 103         __raw_writel(tmp, S3C2410_GSTATUS2);
 104
 105         if ( machine_is_aml_m5900() )
 106                 s3c2410_gpio_setpin(S3C2410_GPF(2), 0);
 107
 108         return 0;
 109 }
 110
 111 static int s3c2410_pm_add(struct sys_device *dev)
 112 {
 113         pm_cpu_prep = s3c2410_pm_prepare;
 114         pm_cpu_sleep = s3c2410_cpu_suspend;
 115
 116         return 0;
 117 }
 118
 119 #if defined(CONFIG_CPU_S3C2410)
 120 static struct sysdev_driver s3c2410_pm_driver = {
 121         .add            = s3c2410_pm_add,
 122         .resume         = s3c2410_pm_resume,
 123 };
 124
 125 /* register ourselves */
 126
 127 static int __init s3c2410_pm_drvinit(void)
 128 {
 129         return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_pm_driver);
 130 }
 131
 132 arch_initcall(s3c2410_pm_drvinit);
 133
 134 static struct sysdev_driver s3c2410a_pm_driver = {
 135         .add            = s3c2410_pm_add,
 136         .resume         = s3c2410_pm_resume,
 137 };
 138
 139 static int __init s3c2410a_pm_drvinit(void)
 140 {
 141         return sysdev_driver_register(&s3c2410a_sysclass, &s3c2410a_pm_driver);
 142 }
 143
 144 arch_initcall(s3c2410a_pm_drvinit);
 145 #endif
 146
 147 #if defined(CONFIG_CPU_S3C2440)
 148 static struct sysdev_driver s3c2440_pm_driver = {
 149         .add            = s3c2410_pm_add,
 150         .resume         = s3c2410_pm_resume,
 151 };
 152
 153 static int __init s3c2440_pm_drvinit(void)
 154 {
 155         return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_pm_driver);
 156 }
 157
 158 arch_initcall(s3c2440_pm_drvinit);
 159 #endif
 160
 161 #if defined(CONFIG_CPU_S3C2442)
 162 static struct sysdev_driver s3c2442_pm_driver = {
 163         .add            = s3c2410_pm_add,
 164         .resume         = s3c2410_pm_resume,
 165 };
 166
 167 static int __init s3c2442_pm_drvinit(void)
 168 {
 169         return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_pm_driver);
 170 }
 171
 172 arch_initcall(s3c2442_pm_drvinit);
 173 #endif