2 * pci_link.c - ACPI PCI Interrupt Link Device Driver ($Revision: 34 $)
4 * Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
5 * Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
6 * Copyright (C) 2002 Dominik Brodowski <devel@brodo.de>
8 * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2 of the License, or (at
13 * your option) any later version.
15 * This program is distributed in the hope that it will be useful, but
16 * WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
18 * General Public License for more details.
20 * You should have received a copy of the GNU General Public License along
21 * with this program; if not, write to the Free Software Foundation, Inc.,
22 * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
24 * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
27 * 1. Support more than one IRQ resource entry per link device (index).
28 * 2. Implement start/stop mechanism and use ACPI Bus Driver facilities
29 * for IRQ management (e.g. start()->_SRS).
32 #include <linux/sysdev.h>
33 #include <linux/kernel.h>
34 #include <linux/module.h>
35 #include <linux/init.h>
36 #include <linux/types.h>
37 #include <linux/spinlock.h>
39 #include <linux/pci.h>
40 #include <linux/mutex.h>
41 #include <linux/slab.h>
43 #include <acpi/acpi_bus.h>
44 #include <acpi/acpi_drivers.h>
46 #define PREFIX "ACPI: "
48 #define _COMPONENT ACPI_PCI_COMPONENT
49 ACPI_MODULE_NAME("pci_link");
50 #define ACPI_PCI_LINK_CLASS "pci_irq_routing"
51 #define ACPI_PCI_LINK_DEVICE_NAME "PCI Interrupt Link"
52 #define ACPI_PCI_LINK_FILE_INFO "info"
53 #define ACPI_PCI_LINK_FILE_STATUS "state"
54 #define ACPI_PCI_LINK_MAX_POSSIBLE 16
56 static int acpi_pci_link_add(struct acpi_device
*device
);
57 static int acpi_pci_link_remove(struct acpi_device
*device
, int type
);
59 static const struct acpi_device_id link_device_ids
[] = {
63 MODULE_DEVICE_TABLE(acpi
, link_device_ids
);
65 static struct acpi_driver acpi_pci_link_driver
= {
67 .class = ACPI_PCI_LINK_CLASS
,
68 .ids
= link_device_ids
,
70 .add
= acpi_pci_link_add
,
71 .remove
= acpi_pci_link_remove
,
76 * If a link is initialized, we never change its active and initialized
77 * later even the link is disable. Instead, we just repick the active irq
79 struct acpi_pci_link_irq
{
80 u8 active
; /* Current IRQ */
81 u8 triggering
; /* All IRQs */
82 u8 polarity
; /* All IRQs */
85 u8 possible
[ACPI_PCI_LINK_MAX_POSSIBLE
];
90 struct acpi_pci_link
{
91 struct list_head list
;
92 struct acpi_device
*device
;
93 struct acpi_pci_link_irq irq
;
97 static LIST_HEAD(acpi_link_list
);
98 static DEFINE_MUTEX(acpi_link_lock
);
100 /* --------------------------------------------------------------------------
101 PCI Link Device Management
102 -------------------------------------------------------------------------- */
105 * set context (link) possible list from resource list
107 static acpi_status
acpi_pci_link_check_possible(struct acpi_resource
*resource
,
110 struct acpi_pci_link
*link
= context
;
113 switch (resource
->type
) {
114 case ACPI_RESOURCE_TYPE_START_DEPENDENT
:
115 case ACPI_RESOURCE_TYPE_END_TAG
:
117 case ACPI_RESOURCE_TYPE_IRQ
:
119 struct acpi_resource_irq
*p
= &resource
->data
.irq
;
120 if (!p
|| !p
->interrupt_count
) {
121 ACPI_DEBUG_PRINT((ACPI_DB_INFO
,
122 "Blank _PRS IRQ resource\n"));
126 (i
< p
->interrupt_count
127 && i
< ACPI_PCI_LINK_MAX_POSSIBLE
); i
++) {
128 if (!p
->interrupts
[i
]) {
129 printk(KERN_WARNING PREFIX
130 "Invalid _PRS IRQ %d\n",
134 link
->irq
.possible
[i
] = p
->interrupts
[i
];
135 link
->irq
.possible_count
++;
137 link
->irq
.triggering
= p
->triggering
;
138 link
->irq
.polarity
= p
->polarity
;
139 link
->irq
.resource_type
= ACPI_RESOURCE_TYPE_IRQ
;
142 case ACPI_RESOURCE_TYPE_EXTENDED_IRQ
:
144 struct acpi_resource_extended_irq
*p
=
145 &resource
->data
.extended_irq
;
146 if (!p
|| !p
->interrupt_count
) {
147 printk(KERN_WARNING PREFIX
148 "Blank _PRS EXT IRQ resource\n");
152 (i
< p
->interrupt_count
153 && i
< ACPI_PCI_LINK_MAX_POSSIBLE
); i
++) {
154 if (!p
->interrupts
[i
]) {
155 printk(KERN_WARNING PREFIX
156 "Invalid _PRS IRQ %d\n",
160 link
->irq
.possible
[i
] = p
->interrupts
[i
];
161 link
->irq
.possible_count
++;
163 link
->irq
.triggering
= p
->triggering
;
164 link
->irq
.polarity
= p
->polarity
;
165 link
->irq
.resource_type
= ACPI_RESOURCE_TYPE_EXTENDED_IRQ
;
169 printk(KERN_ERR PREFIX
"_PRS resource type 0x%x isn't an IRQ\n",
174 return AE_CTRL_TERMINATE
;
177 static int acpi_pci_link_get_possible(struct acpi_pci_link
*link
)
181 status
= acpi_walk_resources(link
->device
->handle
, METHOD_NAME__PRS
,
182 acpi_pci_link_check_possible
, link
);
183 if (ACPI_FAILURE(status
)) {
184 ACPI_EXCEPTION((AE_INFO
, status
, "Evaluating _PRS"));
188 ACPI_DEBUG_PRINT((ACPI_DB_INFO
,
189 "Found %d possible IRQs\n",
190 link
->irq
.possible_count
));
195 static acpi_status
acpi_pci_link_check_current(struct acpi_resource
*resource
,
200 switch (resource
->type
) {
201 case ACPI_RESOURCE_TYPE_START_DEPENDENT
:
202 case ACPI_RESOURCE_TYPE_END_TAG
:
204 case ACPI_RESOURCE_TYPE_IRQ
:
206 struct acpi_resource_irq
*p
= &resource
->data
.irq
;
207 if (!p
|| !p
->interrupt_count
) {
209 * IRQ descriptors may have no IRQ# bits set,
210 * particularly those those w/ _STA disabled
212 ACPI_DEBUG_PRINT((ACPI_DB_INFO
,
213 "Blank _CRS IRQ resource\n"));
216 *irq
= p
->interrupts
[0];
219 case ACPI_RESOURCE_TYPE_EXTENDED_IRQ
:
221 struct acpi_resource_extended_irq
*p
=
222 &resource
->data
.extended_irq
;
223 if (!p
|| !p
->interrupt_count
) {
225 * extended IRQ descriptors must
226 * return at least 1 IRQ
228 printk(KERN_WARNING PREFIX
229 "Blank _CRS EXT IRQ resource\n");
232 *irq
= p
->interrupts
[0];
237 printk(KERN_ERR PREFIX
"_CRS resource type 0x%x isn't an IRQ\n",
242 return AE_CTRL_TERMINATE
;
246 * Run _CRS and set link->irq.active
252 static int acpi_pci_link_get_current(struct acpi_pci_link
*link
)
258 link
->irq
.active
= 0;
260 /* in practice, status disabled is meaningless, ignore it */
262 /* Query _STA, set link->device->status */
263 result
= acpi_bus_get_status(link
->device
);
265 printk(KERN_ERR PREFIX
"Unable to read status\n");
269 if (!link
->device
->status
.enabled
) {
270 ACPI_DEBUG_PRINT((ACPI_DB_INFO
, "Link disabled\n"));
276 * Query and parse _CRS to get the current IRQ assignment.
279 status
= acpi_walk_resources(link
->device
->handle
, METHOD_NAME__CRS
,
280 acpi_pci_link_check_current
, &irq
);
281 if (ACPI_FAILURE(status
)) {
282 ACPI_EXCEPTION((AE_INFO
, status
, "Evaluating _CRS"));
287 if (acpi_strict
&& !irq
) {
288 printk(KERN_ERR PREFIX
"_CRS returned 0\n");
292 link
->irq
.active
= irq
;
294 ACPI_DEBUG_PRINT((ACPI_DB_INFO
, "Link at IRQ %d \n", link
->irq
.active
));
300 static int acpi_pci_link_set(struct acpi_pci_link
*link
, int irq
)
305 struct acpi_resource res
;
306 struct acpi_resource end
;
308 struct acpi_buffer buffer
= { 0, NULL
};
313 resource
= kzalloc(sizeof(*resource
) + 1, irqs_disabled() ? GFP_ATOMIC
: GFP_KERNEL
);
317 buffer
.length
= sizeof(*resource
) + 1;
318 buffer
.pointer
= resource
;
320 switch (link
->irq
.resource_type
) {
321 case ACPI_RESOURCE_TYPE_IRQ
:
322 resource
->res
.type
= ACPI_RESOURCE_TYPE_IRQ
;
323 resource
->res
.length
= sizeof(struct acpi_resource
);
324 resource
->res
.data
.irq
.triggering
= link
->irq
.triggering
;
325 resource
->res
.data
.irq
.polarity
=
327 if (link
->irq
.triggering
== ACPI_EDGE_SENSITIVE
)
328 resource
->res
.data
.irq
.sharable
=
331 resource
->res
.data
.irq
.sharable
= ACPI_SHARED
;
332 resource
->res
.data
.irq
.interrupt_count
= 1;
333 resource
->res
.data
.irq
.interrupts
[0] = irq
;
336 case ACPI_RESOURCE_TYPE_EXTENDED_IRQ
:
337 resource
->res
.type
= ACPI_RESOURCE_TYPE_EXTENDED_IRQ
;
338 resource
->res
.length
= sizeof(struct acpi_resource
);
339 resource
->res
.data
.extended_irq
.producer_consumer
=
341 resource
->res
.data
.extended_irq
.triggering
=
342 link
->irq
.triggering
;
343 resource
->res
.data
.extended_irq
.polarity
=
345 if (link
->irq
.triggering
== ACPI_EDGE_SENSITIVE
)
346 resource
->res
.data
.irq
.sharable
=
349 resource
->res
.data
.irq
.sharable
= ACPI_SHARED
;
350 resource
->res
.data
.extended_irq
.interrupt_count
= 1;
351 resource
->res
.data
.extended_irq
.interrupts
[0] = irq
;
352 /* ignore resource_source, it's optional */
355 printk(KERN_ERR PREFIX
"Invalid Resource_type %d\n", link
->irq
.resource_type
);
360 resource
->end
.type
= ACPI_RESOURCE_TYPE_END_TAG
;
362 /* Attempt to set the resource */
363 status
= acpi_set_current_resources(link
->device
->handle
, &buffer
);
365 /* check for total failure */
366 if (ACPI_FAILURE(status
)) {
367 ACPI_EXCEPTION((AE_INFO
, status
, "Evaluating _SRS"));
372 /* Query _STA, set device->status */
373 result
= acpi_bus_get_status(link
->device
);
375 printk(KERN_ERR PREFIX
"Unable to read status\n");
378 if (!link
->device
->status
.enabled
) {
379 printk(KERN_WARNING PREFIX
380 "%s [%s] disabled and referenced, BIOS bug\n",
381 acpi_device_name(link
->device
),
382 acpi_device_bid(link
->device
));
385 /* Query _CRS, set link->irq.active */
386 result
= acpi_pci_link_get_current(link
);
392 * Is current setting not what we set?
393 * set link->irq.active
395 if (link
->irq
.active
!= irq
) {
397 * policy: when _CRS doesn't return what we just _SRS
398 * assume _SRS worked and override _CRS value.
400 printk(KERN_WARNING PREFIX
401 "%s [%s] BIOS reported IRQ %d, using IRQ %d\n",
402 acpi_device_name(link
->device
),
403 acpi_device_bid(link
->device
), link
->irq
.active
, irq
);
404 link
->irq
.active
= irq
;
407 ACPI_DEBUG_PRINT((ACPI_DB_INFO
, "Set IRQ %d\n", link
->irq
.active
));
414 /* --------------------------------------------------------------------------
415 PCI Link IRQ Management
416 -------------------------------------------------------------------------- */
419 * "acpi_irq_balance" (default in APIC mode) enables ACPI to use PIC Interrupt
420 * Link Devices to move the PIRQs around to minimize sharing.
422 * "acpi_irq_nobalance" (default in PIC mode) tells ACPI not to move any PIC IRQs
423 * that the BIOS has already set to active. This is necessary because
424 * ACPI has no automatic means of knowing what ISA IRQs are used. Note that
425 * if the BIOS doesn't set a Link Device active, ACPI needs to program it
426 * even if acpi_irq_nobalance is set.
428 * A tables of penalties avoids directing PCI interrupts to well known
429 * ISA IRQs. Boot params are available to over-ride the default table:
431 * List interrupts that are free for PCI use.
434 * List interrupts that should not be used for PCI:
437 * Note that PCI IRQ routers have a list of possible IRQs,
438 * which may not include the IRQs this table says are available.
440 * Since this heuristic can't tell the difference between a link
441 * that no device will attach to, vs. a link which may be shared
442 * by multiple active devices -- it is not optimal.
444 * If interrupt performance is that important, get an IO-APIC system
445 * with a pin dedicated to each device. Or for that matter, an MSI
449 #define ACPI_MAX_IRQS 256
450 #define ACPI_MAX_ISA_IRQ 16
452 #define PIRQ_PENALTY_PCI_AVAILABLE (0)
453 #define PIRQ_PENALTY_PCI_POSSIBLE (16*16)
454 #define PIRQ_PENALTY_PCI_USING (16*16*16)
455 #define PIRQ_PENALTY_ISA_TYPICAL (16*16*16*16)
456 #define PIRQ_PENALTY_ISA_USED (16*16*16*16*16)
457 #define PIRQ_PENALTY_ISA_ALWAYS (16*16*16*16*16*16)
459 static int acpi_irq_penalty
[ACPI_MAX_IRQS
] = {
460 PIRQ_PENALTY_ISA_ALWAYS
, /* IRQ0 timer */
461 PIRQ_PENALTY_ISA_ALWAYS
, /* IRQ1 keyboard */
462 PIRQ_PENALTY_ISA_ALWAYS
, /* IRQ2 cascade */
463 PIRQ_PENALTY_ISA_TYPICAL
, /* IRQ3 serial */
464 PIRQ_PENALTY_ISA_TYPICAL
, /* IRQ4 serial */
465 PIRQ_PENALTY_ISA_TYPICAL
, /* IRQ5 sometimes SoundBlaster */
466 PIRQ_PENALTY_ISA_TYPICAL
, /* IRQ6 */
467 PIRQ_PENALTY_ISA_TYPICAL
, /* IRQ7 parallel, spurious */
468 PIRQ_PENALTY_ISA_TYPICAL
, /* IRQ8 rtc, sometimes */
469 PIRQ_PENALTY_PCI_AVAILABLE
, /* IRQ9 PCI, often acpi */
470 PIRQ_PENALTY_PCI_AVAILABLE
, /* IRQ10 PCI */
471 PIRQ_PENALTY_PCI_AVAILABLE
, /* IRQ11 PCI */
472 PIRQ_PENALTY_ISA_USED
, /* IRQ12 mouse */
473 PIRQ_PENALTY_ISA_USED
, /* IRQ13 fpe, sometimes */
474 PIRQ_PENALTY_ISA_USED
, /* IRQ14 ide0 */
475 PIRQ_PENALTY_ISA_USED
, /* IRQ15 ide1 */
479 int __init
acpi_irq_penalty_init(void)
481 struct acpi_pci_link
*link
;
485 * Update penalties to facilitate IRQ balancing.
487 list_for_each_entry(link
, &acpi_link_list
, list
) {
490 * reflect the possible and active irqs in the penalty table --
491 * useful for breaking ties.
493 if (link
->irq
.possible_count
) {
495 PIRQ_PENALTY_PCI_POSSIBLE
/
496 link
->irq
.possible_count
;
498 for (i
= 0; i
< link
->irq
.possible_count
; i
++) {
499 if (link
->irq
.possible
[i
] < ACPI_MAX_ISA_IRQ
)
500 acpi_irq_penalty
[link
->irq
.
505 } else if (link
->irq
.active
) {
506 acpi_irq_penalty
[link
->irq
.active
] +=
507 PIRQ_PENALTY_PCI_POSSIBLE
;
510 /* Add a penalty for the SCI */
511 acpi_irq_penalty
[acpi_gbl_FADT
.sci_interrupt
] += PIRQ_PENALTY_PCI_USING
;
515 static int acpi_irq_balance
= -1; /* 0: static, 1: balance */
517 static int acpi_pci_link_allocate(struct acpi_pci_link
*link
)
522 if (link
->irq
.initialized
) {
523 if (link
->refcnt
== 0)
524 /* This means the link is disabled but initialized */
525 acpi_pci_link_set(link
, link
->irq
.active
);
530 * search for active IRQ in list of possible IRQs.
532 for (i
= 0; i
< link
->irq
.possible_count
; ++i
) {
533 if (link
->irq
.active
== link
->irq
.possible
[i
])
537 * forget active IRQ that is not in possible list
539 if (i
== link
->irq
.possible_count
) {
541 printk(KERN_WARNING PREFIX
"_CRS %d not found"
542 " in _PRS\n", link
->irq
.active
);
543 link
->irq
.active
= 0;
547 * if active found, use it; else pick entry from end of possible list.
549 if (link
->irq
.active
)
550 irq
= link
->irq
.active
;
552 irq
= link
->irq
.possible
[link
->irq
.possible_count
- 1];
554 if (acpi_irq_balance
|| !link
->irq
.active
) {
556 * Select the best IRQ. This is done in reverse to promote
557 * the use of IRQs 9, 10, 11, and >15.
559 for (i
= (link
->irq
.possible_count
- 1); i
>= 0; i
--) {
560 if (acpi_irq_penalty
[irq
] >
561 acpi_irq_penalty
[link
->irq
.possible
[i
]])
562 irq
= link
->irq
.possible
[i
];
566 /* Attempt to enable the link device at this IRQ. */
567 if (acpi_pci_link_set(link
, irq
)) {
568 printk(KERN_ERR PREFIX
"Unable to set IRQ for %s [%s]. "
569 "Try pci=noacpi or acpi=off\n",
570 acpi_device_name(link
->device
),
571 acpi_device_bid(link
->device
));
574 acpi_irq_penalty
[link
->irq
.active
] += PIRQ_PENALTY_PCI_USING
;
575 printk(KERN_WARNING PREFIX
"%s [%s] enabled at IRQ %d\n",
576 acpi_device_name(link
->device
),
577 acpi_device_bid(link
->device
), link
->irq
.active
);
580 link
->irq
.initialized
= 1;
585 * acpi_pci_link_allocate_irq
586 * success: return IRQ >= 0
589 int acpi_pci_link_allocate_irq(acpi_handle handle
, int index
, int *triggering
,
590 int *polarity
, char **name
)
593 struct acpi_device
*device
;
594 struct acpi_pci_link
*link
;
596 result
= acpi_bus_get_device(handle
, &device
);
598 printk(KERN_ERR PREFIX
"Invalid link device\n");
602 link
= acpi_driver_data(device
);
604 printk(KERN_ERR PREFIX
"Invalid link context\n");
608 /* TBD: Support multiple index (IRQ) entries per Link Device */
610 printk(KERN_ERR PREFIX
"Invalid index %d\n", index
);
614 mutex_lock(&acpi_link_lock
);
615 if (acpi_pci_link_allocate(link
)) {
616 mutex_unlock(&acpi_link_lock
);
620 if (!link
->irq
.active
) {
621 mutex_unlock(&acpi_link_lock
);
622 printk(KERN_ERR PREFIX
"Link active IRQ is 0!\n");
626 mutex_unlock(&acpi_link_lock
);
629 *triggering
= link
->irq
.triggering
;
631 *polarity
= link
->irq
.polarity
;
633 *name
= acpi_device_bid(link
->device
);
634 ACPI_DEBUG_PRINT((ACPI_DB_INFO
,
635 "Link %s is referenced\n",
636 acpi_device_bid(link
->device
)));
637 return (link
->irq
.active
);
641 * We don't change link's irq information here. After it is reenabled, we
642 * continue use the info
644 int acpi_pci_link_free_irq(acpi_handle handle
)
646 struct acpi_device
*device
;
647 struct acpi_pci_link
*link
;
650 result
= acpi_bus_get_device(handle
, &device
);
652 printk(KERN_ERR PREFIX
"Invalid link device\n");
656 link
= acpi_driver_data(device
);
658 printk(KERN_ERR PREFIX
"Invalid link context\n");
662 mutex_lock(&acpi_link_lock
);
663 if (!link
->irq
.initialized
) {
664 mutex_unlock(&acpi_link_lock
);
665 printk(KERN_ERR PREFIX
"Link isn't initialized\n");
670 * The Link reference count allows us to _DISable an unused link
671 * and suspend time, and set it again on resume.
672 * However, 2.6.12 still has irq_router.resume
673 * which blindly restores the link state.
674 * So we disable the reference count method
675 * to prevent duplicate acpi_pci_link_set()
676 * which would harm some systems
680 ACPI_DEBUG_PRINT((ACPI_DB_INFO
,
681 "Link %s is dereferenced\n",
682 acpi_device_bid(link
->device
)));
684 if (link
->refcnt
== 0)
685 acpi_evaluate_object(link
->device
->handle
, "_DIS", NULL
, NULL
);
687 mutex_unlock(&acpi_link_lock
);
688 return (link
->irq
.active
);
691 /* --------------------------------------------------------------------------
693 -------------------------------------------------------------------------- */
695 static int acpi_pci_link_add(struct acpi_device
*device
)
698 struct acpi_pci_link
*link
;
702 link
= kzalloc(sizeof(struct acpi_pci_link
), GFP_KERNEL
);
706 link
->device
= device
;
707 strcpy(acpi_device_name(device
), ACPI_PCI_LINK_DEVICE_NAME
);
708 strcpy(acpi_device_class(device
), ACPI_PCI_LINK_CLASS
);
709 device
->driver_data
= link
;
711 mutex_lock(&acpi_link_lock
);
712 result
= acpi_pci_link_get_possible(link
);
716 /* query and set link->irq.active */
717 acpi_pci_link_get_current(link
);
719 printk(KERN_INFO PREFIX
"%s [%s] (IRQs", acpi_device_name(device
),
720 acpi_device_bid(device
));
721 for (i
= 0; i
< link
->irq
.possible_count
; i
++) {
722 if (link
->irq
.active
== link
->irq
.possible
[i
]) {
723 printk(" *%d", link
->irq
.possible
[i
]);
726 printk(" %d", link
->irq
.possible
[i
]);
732 printk(" *%d", link
->irq
.active
);
734 if (!link
->device
->status
.enabled
)
735 printk(", disabled.");
739 list_add_tail(&link
->list
, &acpi_link_list
);
742 /* disable all links -- to be activated on use */
743 acpi_evaluate_object(device
->handle
, "_DIS", NULL
, NULL
);
744 mutex_unlock(&acpi_link_lock
);
752 static int acpi_pci_link_resume(struct acpi_pci_link
*link
)
754 if (link
->refcnt
&& link
->irq
.active
&& link
->irq
.initialized
)
755 return (acpi_pci_link_set(link
, link
->irq
.active
));
760 static int irqrouter_resume(struct sys_device
*dev
)
762 struct acpi_pci_link
*link
;
764 list_for_each_entry(link
, &acpi_link_list
, list
) {
765 acpi_pci_link_resume(link
);
770 static int acpi_pci_link_remove(struct acpi_device
*device
, int type
)
772 struct acpi_pci_link
*link
;
774 link
= acpi_driver_data(device
);
776 mutex_lock(&acpi_link_lock
);
777 list_del(&link
->list
);
778 mutex_unlock(&acpi_link_lock
);
785 * modify acpi_irq_penalty[] from cmdline
787 static int __init
acpi_irq_penalty_update(char *str
, int used
)
791 for (i
= 0; i
< 16; i
++) {
795 retval
= get_option(&str
, &irq
);
798 break; /* no number found */
803 if (irq
>= ARRAY_SIZE(acpi_irq_penalty
))
807 acpi_irq_penalty
[irq
] += PIRQ_PENALTY_ISA_USED
;
809 acpi_irq_penalty
[irq
] = PIRQ_PENALTY_PCI_AVAILABLE
;
811 if (retval
!= 2) /* no next number */
818 * We'd like PNP to call this routine for the
819 * single ISA_USED value for each legacy device.
820 * But instead it calls us with each POSSIBLE setting.
821 * There is no ISA_POSSIBLE weight, so we simply use
822 * the (small) PCI_USING penalty.
824 void acpi_penalize_isa_irq(int irq
, int active
)
826 if (irq
>= 0 && irq
< ARRAY_SIZE(acpi_irq_penalty
)) {
828 acpi_irq_penalty
[irq
] += PIRQ_PENALTY_ISA_USED
;
830 acpi_irq_penalty
[irq
] += PIRQ_PENALTY_PCI_USING
;
835 * Over-ride default table to reserve additional IRQs for use by ISA
836 * e.g. acpi_irq_isa=5
837 * Useful for telling ACPI how not to interfere with your ISA sound card.
839 static int __init
acpi_irq_isa(char *str
)
841 return acpi_irq_penalty_update(str
, 1);
844 __setup("acpi_irq_isa=", acpi_irq_isa
);
847 * Over-ride default table to free additional IRQs for use by PCI
848 * e.g. acpi_irq_pci=7,15
849 * Used for acpi_irq_balance to free up IRQs to reduce PCI IRQ sharing.
851 static int __init
acpi_irq_pci(char *str
)
853 return acpi_irq_penalty_update(str
, 0);
856 __setup("acpi_irq_pci=", acpi_irq_pci
);
858 static int __init
acpi_irq_nobalance_set(char *str
)
860 acpi_irq_balance
= 0;
864 __setup("acpi_irq_nobalance", acpi_irq_nobalance_set
);
866 static int __init
acpi_irq_balance_set(char *str
)
868 acpi_irq_balance
= 1;
872 __setup("acpi_irq_balance", acpi_irq_balance_set
);
874 /* FIXME: we will remove this interface after all drivers call pci_disable_device */
875 static struct sysdev_class irqrouter_sysdev_class
= {
877 .resume
= irqrouter_resume
,
880 static struct sys_device device_irqrouter
= {
882 .cls
= &irqrouter_sysdev_class
,
885 static int __init
irqrouter_init_sysfs(void)
889 if (acpi_disabled
|| acpi_noirq
)
892 error
= sysdev_class_register(&irqrouter_sysdev_class
);
894 error
= sysdev_register(&device_irqrouter
);
899 device_initcall(irqrouter_init_sysfs
);
901 static int __init
acpi_pci_link_init(void)
906 if (acpi_irq_balance
== -1) {
907 /* no command line switch: enable balancing in IOAPIC mode */
908 if (acpi_irq_model
== ACPI_IRQ_MODEL_IOAPIC
)
909 acpi_irq_balance
= 1;
911 acpi_irq_balance
= 0;
914 if (acpi_bus_register_driver(&acpi_pci_link_driver
) < 0)
920 subsys_initcall(acpi_pci_link_init
);