drivers/power/max8925_power.c

   1 /*
   2  * Battery driver for Maxim MAX8925
   3  *
   4  * Copyright (c) 2009-2010 Marvell International Ltd.
   5  *      Haojian Zhuang <haojian.zhuang@marvell.com>
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License version 2 as
   9  * published by the Free Software Foundation.
  10  */
  11
  12 #include <linux/module.h>
  13 #include <linux/err.h>
  14 #include <linux/slab.h>
  15 #include <linux/i2c.h>
  16 #include <linux/interrupt.h>
  17 #include <linux/platform_device.h>
  18 #include <linux/power_supply.h>
  19 #include <linux/mfd/max8925.h>
  20
  21 /* registers in GPM */
  22 #define MAX8925_OUT5VEN                 0x54
  23 #define MAX8925_OUT3VEN                 0x58
  24 #define MAX8925_CHG_CNTL1               0x7c
  25
  26 /* bits definition */
  27 #define MAX8925_CHG_STAT_VSYSLOW        (1 << 0)
  28 #define MAX8925_CHG_STAT_MODE_MASK      (3 << 2)
  29 #define MAX8925_CHG_STAT_EN_MASK        (1 << 4)
  30 #define MAX8925_CHG_MBDET               (1 << 1)
  31 #define MAX8925_CHG_AC_RANGE_MASK       (3 << 6)
  32
  33 /* registers in ADC */
  34 #define MAX8925_ADC_RES_CNFG1           0x06
  35 #define MAX8925_ADC_AVG_CNFG1           0x07
  36 #define MAX8925_ADC_ACQ_CNFG1           0x08
  37 #define MAX8925_ADC_ACQ_CNFG2           0x09
  38 /* 2 bytes registers in below. MSB is 1st, LSB is 2nd. */
  39 #define MAX8925_ADC_AUX2                0x62
  40 #define MAX8925_ADC_VCHG                0x64
  41 #define MAX8925_ADC_VBBATT              0x66
  42 #define MAX8925_ADC_VMBATT              0x68
  43 #define MAX8925_ADC_ISNS                0x6a
  44 #define MAX8925_ADC_THM                 0x6c
  45 #define MAX8925_ADC_TDIE                0x6e
  46 #define MAX8925_CMD_AUX2                0xc8
  47 #define MAX8925_CMD_VCHG                0xd0
  48 #define MAX8925_CMD_VBBATT              0xd8
  49 #define MAX8925_CMD_VMBATT              0xe0
  50 #define MAX8925_CMD_ISNS                0xe8
  51 #define MAX8925_CMD_THM                 0xf0
  52 #define MAX8925_CMD_TDIE                0xf8
  53
  54 enum {
  55         MEASURE_AUX2,
  56         MEASURE_VCHG,
  57         MEASURE_VBBATT,
  58         MEASURE_VMBATT,
  59         MEASURE_ISNS,
  60         MEASURE_THM,
  61         MEASURE_TDIE,
  62         MEASURE_MAX,
  63 };
  64
  65 struct max8925_power_info {
  66         struct max8925_chip     *chip;
  67         struct i2c_client       *gpm;
  68         struct i2c_client       *adc;
  69
  70         struct power_supply     ac;
  71         struct power_supply     usb;
  72         struct power_supply     battery;
  73         int                     irq_base;
  74         unsigned                ac_online:1;
  75         unsigned                usb_online:1;
  76         unsigned                bat_online:1;
  77         unsigned                chg_mode:2;
  78         unsigned                batt_detect:1;  /* detecing MB by ID pin */
  79         unsigned                topoff_threshold:2;
  80         unsigned                fast_charge:3;
  81
  82         int (*set_charger) (int);
  83 };
  84
  85 static int __set_charger(struct max8925_power_info *info, int enable)
  86 {
  87         struct max8925_chip *chip = info->chip;
  88         if (enable) {
  89                 /* enable charger in platform */
  90                 if (info->set_charger)
  91                         info->set_charger(1);
  92                 /* enable charger */
  93                 max8925_set_bits(info->gpm, MAX8925_CHG_CNTL1, 1 << 7, 0);
  94         } else {
  95                 /* disable charge */
  96                 max8925_set_bits(info->gpm, MAX8925_CHG_CNTL1, 1 << 7, 1 << 7);
  97                 if (info->set_charger)
  98                         info->set_charger(0);
  99         }
 100         dev_dbg(chip->dev, "%s\n", (enable) ? "Enable charger"
 101                 : "Disable charger");
 102         return 0;
 103 }
 104
 105 static irqreturn_t max8925_charger_handler(int irq, void *data)
 106 {
 107         struct max8925_power_info *info = (struct max8925_power_info *)data;
 108         struct max8925_chip *chip = info->chip;
 109
 110         switch (irq - chip->irq_base) {
 111         case MAX8925_IRQ_VCHG_DC_R:
 112                 info->ac_online = 1;
 113                 __set_charger(info, 1);
 114                 dev_dbg(chip->dev, "Adapter inserted\n");
 115                 break;
 116         case MAX8925_IRQ_VCHG_DC_F:
 117                 info->ac_online = 0;
 118                 __set_charger(info, 0);
 119                 dev_dbg(chip->dev, "Adapter is removal\n");
 120                 break;
 121         case MAX8925_IRQ_VCHG_USB_R:
 122                 info->usb_online = 1;
 123                 __set_charger(info, 1);
 124                 dev_dbg(chip->dev, "USB inserted\n");
 125                 break;
 126         case MAX8925_IRQ_VCHG_USB_F:
 127                 info->usb_online = 0;
 128                 __set_charger(info, 0);
 129                 dev_dbg(chip->dev, "USB is removal\n");
 130                 break;
 131         case MAX8925_IRQ_VCHG_THM_OK_F:
 132                 /* Battery is not ready yet */
 133                 dev_dbg(chip->dev, "Battery temperature is out of range\n");
 134         case MAX8925_IRQ_VCHG_DC_OVP:
 135                 dev_dbg(chip->dev, "Error detection\n");
 136                 __set_charger(info, 0);
 137                 break;
 138         case MAX8925_IRQ_VCHG_THM_OK_R:
 139                 /* Battery is ready now */
 140                 dev_dbg(chip->dev, "Battery temperature is in range\n");
 141                 break;
 142         case MAX8925_IRQ_VCHG_SYSLOW_R:
 143                 /* VSYS is low */
 144                 dev_info(chip->dev, "Sys power is too low\n");
 145                 break;
 146         case MAX8925_IRQ_VCHG_SYSLOW_F:
 147                 dev_dbg(chip->dev, "Sys power is above low threshold\n");
 148                 break;
 149         case MAX8925_IRQ_VCHG_DONE:
 150                 __set_charger(info, 0);
 151                 dev_dbg(chip->dev, "Charging is done\n");
 152                 break;
 153         case MAX8925_IRQ_VCHG_TOPOFF:
 154                 dev_dbg(chip->dev, "Charging in top-off mode\n");
 155                 break;
 156         case MAX8925_IRQ_VCHG_TMR_FAULT:
 157                 __set_charger(info, 0);
 158                 dev_dbg(chip->dev, "Safe timer is expired\n");
 159                 break;
 160         case MAX8925_IRQ_VCHG_RST:
 161                 __set_charger(info, 0);
 162                 dev_dbg(chip->dev, "Charger is reset\n");
 163                 break;
 164         }
 165         return IRQ_HANDLED;
 166 }
 167
 168 static int start_measure(struct max8925_power_info *info, int type)
 169 {
 170         unsigned char buf[2] = {0, 0};
 171         int meas_reg = 0, ret;
 172
 173         switch (type) {
 174         case MEASURE_VCHG:
 175                 meas_reg = MAX8925_ADC_VCHG;
 176                 break;
 177         case MEASURE_VBBATT:
 178                 meas_reg = MAX8925_ADC_VBBATT;
 179                 break;
 180         case MEASURE_VMBATT:
 181                 meas_reg = MAX8925_ADC_VMBATT;
 182                 break;
 183         case MEASURE_ISNS:
 184                 meas_reg = MAX8925_ADC_ISNS;
 185                 break;
 186         default:
 187                 return -EINVAL;
 188         }
 189
 190         max8925_bulk_read(info->adc, meas_reg, 2, buf);
 191         ret = (buf[0] << 4) | (buf[1] >> 4);
 192
 193         return ret;
 194 }
 195
 196 static int max8925_ac_get_prop(struct power_supply *psy,
 197                                enum power_supply_property psp,
 198                                union power_supply_propval *val)
 199 {
 200         struct max8925_power_info *info = dev_get_drvdata(psy->dev->parent);
 201         int ret = 0;
 202
 203         switch (psp) {
 204         case POWER_SUPPLY_PROP_ONLINE:
 205                 val->intval = info->ac_online;
 206                 break;
 207         case POWER_SUPPLY_PROP_VOLTAGE_NOW:
 208                 if (info->ac_online) {
 209                         ret = start_measure(info, MEASURE_VCHG);
 210                         if (ret >= 0) {
 211                                 val->intval = ret << 1; /* unit is mV */
 212                                 goto out;
 213                         }
 214                 }
 215                 ret = -ENODATA;
 216                 break;
 217         default:
 218                 ret = -ENODEV;
 219                 break;
 220         }
 221 out:
 222         return ret;
 223 }
 224
 225 static enum power_supply_property max8925_ac_props[] = {
 226         POWER_SUPPLY_PROP_ONLINE,
 227         POWER_SUPPLY_PROP_VOLTAGE_NOW,
 228 };
 229
 230 static int max8925_usb_get_prop(struct power_supply *psy,
 231                                 enum power_supply_property psp,
 232                                 union power_supply_propval *val)
 233 {
 234         struct max8925_power_info *info = dev_get_drvdata(psy->dev->parent);
 235         int ret = 0;
 236
 237         switch (psp) {
 238         case POWER_SUPPLY_PROP_ONLINE:
 239                 val->intval = info->usb_online;
 240                 break;
 241         case POWER_SUPPLY_PROP_VOLTAGE_NOW:
 242                 if (info->usb_online) {
 243                         ret = start_measure(info, MEASURE_VCHG);
 244                         if (ret >= 0) {
 245                                 val->intval = ret << 1; /* unit is mV */
 246                                 goto out;
 247                         }
 248                 }
 249                 ret = -ENODATA;
 250                 break;
 251         default:
 252                 ret = -ENODEV;
 253                 break;
 254         }
 255 out:
 256         return ret;
 257 }
 258
 259 static enum power_supply_property max8925_usb_props[] = {
 260         POWER_SUPPLY_PROP_ONLINE,
 261         POWER_SUPPLY_PROP_VOLTAGE_NOW,
 262 };
 263
 264 static int max8925_bat_get_prop(struct power_supply *psy,
 265                                 enum power_supply_property psp,
 266                                 union power_supply_propval *val)
 267 {
 268         struct max8925_power_info *info = dev_get_drvdata(psy->dev->parent);
 269         long long int tmp = 0;
 270         int ret = 0;
 271
 272         switch (psp) {
 273         case POWER_SUPPLY_PROP_ONLINE:
 274                 val->intval = info->bat_online;
 275                 break;
 276         case POWER_SUPPLY_PROP_VOLTAGE_NOW:
 277                 if (info->bat_online) {
 278                         ret = start_measure(info, MEASURE_VMBATT);
 279                         if (ret >= 0) {
 280                                 val->intval = ret << 1; /* unit is mV */
 281                                 ret = 0;
 282                                 break;
 283                         }
 284                 }
 285                 ret = -ENODATA;
 286                 break;
 287         case POWER_SUPPLY_PROP_CURRENT_NOW:
 288                 if (info->bat_online) {
 289                         ret = start_measure(info, MEASURE_ISNS);
 290                         if (ret >= 0) {
 291                                 tmp = (long long int)ret * 6250 / 4096 - 3125;
 292                                 ret = (int)tmp;
 293                                 val->intval = 0;
 294                                 if (ret > 0)
 295                                         val->intval = ret; /* unit is mA */
 296                                 ret = 0;
 297                                 break;
 298                         }
 299                 }
 300                 ret = -ENODATA;
 301                 break;
 302         case POWER_SUPPLY_PROP_CHARGE_TYPE:
 303                 if (!info->bat_online) {
 304                         ret = -ENODATA;
 305                         break;
 306                 }
 307                 ret = max8925_reg_read(info->gpm, MAX8925_CHG_STATUS);
 308                 ret = (ret & MAX8925_CHG_STAT_MODE_MASK) >> 2;
 309                 switch (ret) {
 310                 case 1:
 311                         val->intval = POWER_SUPPLY_CHARGE_TYPE_FAST;
 312                         break;
 313                 case 0:
 314                 case 2:
 315                         val->intval = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
 316                         break;
 317                 case 3:
 318                         val->intval = POWER_SUPPLY_CHARGE_TYPE_NONE;
 319                         break;
 320                 }
 321                 ret = 0;
 322                 break;
 323         case POWER_SUPPLY_PROP_STATUS:
 324                 if (!info->bat_online) {
 325                         ret = -ENODATA;
 326                         break;
 327                 }
 328                 ret = max8925_reg_read(info->gpm, MAX8925_CHG_STATUS);
 329                 if (info->usb_online || info->ac_online) {
 330                         val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
 331                         if (ret & MAX8925_CHG_STAT_EN_MASK)
 332                                 val->intval = POWER_SUPPLY_STATUS_CHARGING;
 333                 } else
 334                         val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
 335                 ret = 0;
 336                 break;
 337         default:
 338                 ret = -ENODEV;
 339                 break;
 340         }
 341         return ret;
 342 }
 343
 344 static enum power_supply_property max8925_battery_props[] = {
 345         POWER_SUPPLY_PROP_ONLINE,
 346         POWER_SUPPLY_PROP_VOLTAGE_NOW,
 347         POWER_SUPPLY_PROP_CURRENT_NOW,
 348         POWER_SUPPLY_PROP_CHARGE_TYPE,
 349         POWER_SUPPLY_PROP_STATUS,
 350 };
 351
 352 #define REQUEST_IRQ(_irq, _name)                                        \
 353 do {                                                                    \
 354         ret = request_threaded_irq(chip->irq_base + _irq, NULL,         \
 355                                     max8925_charger_handler,            \
 356                                     IRQF_ONESHOT, _name, info);         \
 357         if (ret)                                                        \
 358                 dev_err(chip->dev, "Failed to request IRQ #%d: %d\n",   \
 359                         _irq, ret);                                     \
 360 } while (0)
 361
 362 static __devinit int max8925_init_charger(struct max8925_chip *chip,
 363                                           struct max8925_power_info *info)
 364 {
 365         int ret;
 366
 367         REQUEST_IRQ(MAX8925_IRQ_VCHG_DC_OVP, "ac-ovp");
 368         REQUEST_IRQ(MAX8925_IRQ_VCHG_DC_F, "ac-remove");
 369         REQUEST_IRQ(MAX8925_IRQ_VCHG_DC_R, "ac-insert");
 370         REQUEST_IRQ(MAX8925_IRQ_VCHG_USB_OVP, "usb-ovp");
 371         REQUEST_IRQ(MAX8925_IRQ_VCHG_USB_F, "usb-remove");
 372         REQUEST_IRQ(MAX8925_IRQ_VCHG_USB_R, "usb-insert");
 373         REQUEST_IRQ(MAX8925_IRQ_VCHG_THM_OK_R, "batt-temp-in-range");
 374         REQUEST_IRQ(MAX8925_IRQ_VCHG_THM_OK_F, "batt-temp-out-range");
 375         REQUEST_IRQ(MAX8925_IRQ_VCHG_SYSLOW_F, "vsys-high");
 376         REQUEST_IRQ(MAX8925_IRQ_VCHG_SYSLOW_R, "vsys-low");
 377         REQUEST_IRQ(MAX8925_IRQ_VCHG_RST, "charger-reset");
 378         REQUEST_IRQ(MAX8925_IRQ_VCHG_DONE, "charger-done");
 379         REQUEST_IRQ(MAX8925_IRQ_VCHG_TOPOFF, "charger-topoff");
 380         REQUEST_IRQ(MAX8925_IRQ_VCHG_TMR_FAULT, "charger-timer-expire");
 381
 382         info->ac_online = 0;
 383         info->usb_online = 0;
 384         info->bat_online = 0;
 385         ret = max8925_reg_read(info->gpm, MAX8925_CHG_STATUS);
 386         if (ret >= 0) {
 387                 /*
 388                  * If battery detection is enabled, ID pin of battery is
 389                  * connected to MBDET pin of MAX8925. It could be used to
 390                  * detect battery presence.
 391                  * Otherwise, we have to assume that battery is always on.
 392                  */
 393                 if (info->batt_detect)
 394                         info->bat_online = (ret & MAX8925_CHG_MBDET) ? 0 : 1;
 395                 else
 396                         info->bat_online = 1;
 397                 if (ret & MAX8925_CHG_AC_RANGE_MASK)
 398                         info->ac_online = 1;
 399                 else
 400                         info->ac_online = 0;
 401         }
 402         /* disable charge */
 403         max8925_set_bits(info->gpm, MAX8925_CHG_CNTL1, 1 << 7, 1 << 7);
 404         /* set charging current in charge topoff mode */
 405         max8925_set_bits(info->gpm, MAX8925_CHG_CNTL1, 3 << 5,
 406                          info->topoff_threshold << 5);
 407         /* set charing current in fast charge mode */
 408         max8925_set_bits(info->gpm, MAX8925_CHG_CNTL1, 7, info->fast_charge);
 409
 410         return 0;
 411 }
 412
 413 static __devexit int max8925_deinit_charger(struct max8925_power_info *info)
 414 {
 415         struct max8925_chip *chip = info->chip;
 416         int irq;
 417
 418         irq = chip->irq_base + MAX8925_IRQ_VCHG_DC_OVP;
 419         for (; irq <= chip->irq_base + MAX8925_IRQ_VCHG_TMR_FAULT; irq++)
 420                 free_irq(irq, info);
 421
 422         return 0;
 423 }
 424
 425 static __devinit int max8925_power_probe(struct platform_device *pdev)
 426 {
 427         struct max8925_chip *chip = dev_get_drvdata(pdev->dev.parent);
 428         struct max8925_platform_data *max8925_pdata;
 429         struct max8925_power_pdata *pdata = NULL;
 430         struct max8925_power_info *info;
 431         int ret;
 432
 433         if (pdev->dev.parent->platform_data) {
 434                 max8925_pdata = pdev->dev.parent->platform_data;
 435                 pdata = max8925_pdata->power;
 436         }
 437
 438         if (!pdata) {
 439                 dev_err(&pdev->dev, "platform data isn't assigned to "
 440                         "power supply\n");
 441                 return -EINVAL;
 442         }
 443
 444         info = kzalloc(sizeof(struct max8925_power_info), GFP_KERNEL);
 445         if (!info)
 446                 return -ENOMEM;
 447         info->chip = chip;
 448         info->gpm = chip->i2c;
 449         info->adc = chip->adc;
 450
 451         info->ac.name = "max8925-ac";
 452         info->ac.type = POWER_SUPPLY_TYPE_MAINS;
 453         info->ac.properties = max8925_ac_props;
 454         info->ac.num_properties = ARRAY_SIZE(max8925_ac_props);
 455         info->ac.get_property = max8925_ac_get_prop;
 456         ret = power_supply_register(&pdev->dev, &info->ac);
 457         if (ret)
 458                 goto out;
 459         info->ac.dev->parent = &pdev->dev;
 460
 461         info->usb.name = "max8925-usb";
 462         info->usb.type = POWER_SUPPLY_TYPE_USB;
 463         info->usb.properties = max8925_usb_props;
 464         info->usb.num_properties = ARRAY_SIZE(max8925_usb_props);
 465         info->usb.get_property = max8925_usb_get_prop;
 466         ret = power_supply_register(&pdev->dev, &info->usb);
 467         if (ret)
 468                 goto out_usb;
 469         info->usb.dev->parent = &pdev->dev;
 470
 471         info->battery.name = "max8925-battery";
 472         info->battery.type = POWER_SUPPLY_TYPE_BATTERY;
 473         info->battery.properties = max8925_battery_props;
 474         info->battery.num_properties = ARRAY_SIZE(max8925_battery_props);
 475         info->battery.get_property = max8925_bat_get_prop;
 476         ret = power_supply_register(&pdev->dev, &info->battery);
 477         if (ret)
 478                 goto out_battery;
 479         info->battery.dev->parent = &pdev->dev;
 480
 481         info->batt_detect = pdata->batt_detect;
 482         info->topoff_threshold = pdata->topoff_threshold;
 483         info->fast_charge = pdata->fast_charge;
 484         info->set_charger = pdata->set_charger;
 485         dev_set_drvdata(&pdev->dev, info);
 486         platform_set_drvdata(pdev, info);
 487
 488         max8925_init_charger(chip, info);
 489         return 0;
 490 out_battery:
 491         power_supply_unregister(&info->battery);
 492 out_usb:
 493         power_supply_unregister(&info->ac);
 494 out:
 495         kfree(info);
 496         return ret;
 497 }
 498
 499 static __devexit int max8925_power_remove(struct platform_device *pdev)
 500 {
 501         struct max8925_power_info *info = platform_get_drvdata(pdev);
 502
 503         if (info) {
 504                 power_supply_unregister(&info->ac);
 505                 power_supply_unregister(&info->usb);
 506                 power_supply_unregister(&info->battery);
 507                 max8925_deinit_charger(info);
 508                 kfree(info);
 509         }
 510         return 0;
 511 }
 512
 513 static struct platform_driver max8925_power_driver = {
 514         .probe  = max8925_power_probe,
 515         .remove = __devexit_p(max8925_power_remove),
 516         .driver = {
 517                 .name   = "max8925-power",
 518         },
 519 };
 520
 521 static int __init max8925_power_init(void)
 522 {
 523         return platform_driver_register(&max8925_power_driver);
 524 }
 525 module_init(max8925_power_init);
 526
 527 static void __exit max8925_power_exit(void)
 528 {
 529         platform_driver_unregister(&max8925_power_driver);
 530 }
 531 module_exit(max8925_power_exit);
 532
 533 MODULE_LICENSE("GPL");
 534 MODULE_DESCRIPTION("Power supply driver for MAX8925");
 535 MODULE_ALIAS("platform:max8925-power");