release/src/router/openssl/crypto/engine/eng_openssl.c

   1 /* crypto/engine/eng_openssl.c */
   2 /* Written by Geoff Thorpe (geoff@geoffthorpe.net) for the OpenSSL
   3  * project 2000.
   4  */
   5 /* ====================================================================
   6  * Copyright (c) 1999-2001 The OpenSSL Project.  All rights reserved.
   7  *
   8  * Redistribution and use in source and binary forms, with or without
   9  * modification, are permitted provided that the following conditions
  10  * are met:
  11  *
  12  * 1. Redistributions of source code must retain the above copyright
  13  *    notice, this list of conditions and the following disclaimer.
  14  *
  15  * 2. Redistributions in binary form must reproduce the above copyright
  16  *    notice, this list of conditions and the following disclaimer in
  17  *    the documentation and/or other materials provided with the
  18  *    distribution.
  19  *
  20  * 3. All advertising materials mentioning features or use of this
  21  *    software must display the following acknowledgment:
  22  *    "This product includes software developed by the OpenSSL Project
  23  *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
  24  *
  25  * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
  26  *    endorse or promote products derived from this software without
  27  *    prior written permission. For written permission, please contact
  28  *    licensing@OpenSSL.org.
  29  *
  30  * 5. Products derived from this software may not be called "OpenSSL"
  31  *    nor may "OpenSSL" appear in their names without prior written
  32  *    permission of the OpenSSL Project.
  33  *
  34  * 6. Redistributions of any form whatsoever must retain the following
  35  *    acknowledgment:
  36  *    "This product includes software developed by the OpenSSL Project
  37  *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
  38  *
  39  * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
  40  * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  41  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
  42  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
  43  * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
  44  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
  45  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
  46  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  47  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  48  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
  49  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
  50  * OF THE POSSIBILITY OF SUCH DAMAGE.
  51  * ====================================================================
  52  *
  53  * This product includes cryptographic software written by Eric Young
  54  * (eay@cryptsoft.com).  This product includes software written by Tim
  55  * Hudson (tjh@cryptsoft.com).
  56  *
  57  */
  58 /* ====================================================================
  59  * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED.
  60  * ECDH support in OpenSSL originally developed by
  61  * SUN MICROSYSTEMS, INC., and contributed to the OpenSSL project.
  62  */
  63
  64
  65 #include <stdio.h>
  66 #include <openssl/crypto.h>
  67 #include "cryptlib.h"
  68 #include <openssl/engine.h>
  69 #include <openssl/dso.h>
  70 #include <openssl/pem.h>
  71 #include <openssl/evp.h>
  72 #include <openssl/rand.h>
  73 #ifndef OPENSSL_NO_RSA
  74 #include <openssl/rsa.h>
  75 #endif
  76 #ifndef OPENSSL_NO_DSA
  77 #include <openssl/dsa.h>
  78 #endif
  79 #ifndef OPENSSL_NO_DH
  80 #include <openssl/dh.h>
  81 #endif
  82
  83 /* This testing gunk is implemented (and explained) lower down. It also assumes
  84  * the application explicitly calls "ENGINE_load_openssl()" because this is no
  85  * longer automatic in ENGINE_load_builtin_engines(). */
  86 #define TEST_ENG_OPENSSL_RC4
  87 #define TEST_ENG_OPENSSL_PKEY
  88 /* #define TEST_ENG_OPENSSL_RC4_OTHERS */
  89 #define TEST_ENG_OPENSSL_RC4_P_INIT
  90 /* #define TEST_ENG_OPENSSL_RC4_P_CIPHER */
  91 #define TEST_ENG_OPENSSL_SHA
  92 /* #define TEST_ENG_OPENSSL_SHA_OTHERS */
  93 /* #define TEST_ENG_OPENSSL_SHA_P_INIT */
  94 /* #define TEST_ENG_OPENSSL_SHA_P_UPDATE */
  95 /* #define TEST_ENG_OPENSSL_SHA_P_FINAL */
  96
  97 /* Now check what of those algorithms are actually enabled */
  98 #ifdef OPENSSL_NO_RC4
  99 #undef TEST_ENG_OPENSSL_RC4
 100 #undef TEST_ENG_OPENSSL_RC4_OTHERS
 101 #undef TEST_ENG_OPENSSL_RC4_P_INIT
 102 #undef TEST_ENG_OPENSSL_RC4_P_CIPHER
 103 #endif
 104 #if defined(OPENSSL_NO_SHA) || defined(OPENSSL_NO_SHA0) || defined(OPENSSL_NO_SHA1)
 105 #undef TEST_ENG_OPENSSL_SHA
 106 #undef TEST_ENG_OPENSSL_SHA_OTHERS
 107 #undef TEST_ENG_OPENSSL_SHA_P_INIT
 108 #undef TEST_ENG_OPENSSL_SHA_P_UPDATE
 109 #undef TEST_ENG_OPENSSL_SHA_P_FINAL
 110 #endif
 111
 112 #ifdef TEST_ENG_OPENSSL_RC4
 113 static int openssl_ciphers(ENGINE *e, const EVP_CIPHER **cipher,
 114                                 const int **nids, int nid);
 115 #endif
 116 #ifdef TEST_ENG_OPENSSL_SHA
 117 static int openssl_digests(ENGINE *e, const EVP_MD **digest,
 118                                 const int **nids, int nid);
 119 #endif
 120
 121 #ifdef TEST_ENG_OPENSSL_PKEY
 122 static EVP_PKEY *openssl_load_privkey(ENGINE *eng, const char *key_id,
 123         UI_METHOD *ui_method, void *callback_data);
 124 #endif
 125
 126 /* The constants used when creating the ENGINE */
 127 static const char *engine_openssl_id = "openssl";
 128 static const char *engine_openssl_name = "Software engine support";
 129
 130 /* This internal function is used by ENGINE_openssl() and possibly by the
 131  * "dynamic" ENGINE support too */
 132 static int bind_helper(ENGINE *e)
 133         {
 134         if(!ENGINE_set_id(e, engine_openssl_id)
 135                         || !ENGINE_set_name(e, engine_openssl_name)
 136 #ifndef TEST_ENG_OPENSSL_NO_ALGORITHMS
 137 #ifndef OPENSSL_NO_RSA
 138                         || !ENGINE_set_RSA(e, RSA_get_default_method())
 139 #endif
 140 #ifndef OPENSSL_NO_DSA
 141                         || !ENGINE_set_DSA(e, DSA_get_default_method())
 142 #endif
 143 #ifndef OPENSSL_NO_ECDH
 144                         || !ENGINE_set_ECDH(e, ECDH_OpenSSL())
 145 #endif
 146 #ifndef OPENSSL_NO_ECDSA
 147                         || !ENGINE_set_ECDSA(e, ECDSA_OpenSSL())
 148 #endif
 149 #ifndef OPENSSL_NO_DH
 150                         || !ENGINE_set_DH(e, DH_get_default_method())
 151 #endif
 152                         || !ENGINE_set_RAND(e, RAND_SSLeay())
 153 #ifdef TEST_ENG_OPENSSL_RC4
 154                         || !ENGINE_set_ciphers(e, openssl_ciphers)
 155 #endif
 156 #ifdef TEST_ENG_OPENSSL_SHA
 157                         || !ENGINE_set_digests(e, openssl_digests)
 158 #endif
 159 #endif
 160 #ifdef TEST_ENG_OPENSSL_PKEY
 161                         || !ENGINE_set_load_privkey_function(e, openssl_load_privkey)
 162 #endif
 163                         )
 164                 return 0;
 165         /* If we add errors to this ENGINE, ensure the error handling is setup here */
 166         /* openssl_load_error_strings(); */
 167         return 1;
 168         }
 169
 170 static ENGINE *engine_openssl(void)
 171         {
 172         ENGINE *ret = ENGINE_new();
 173         if(!ret)
 174                 return NULL;
 175         if(!bind_helper(ret))
 176                 {
 177                 ENGINE_free(ret);
 178                 return NULL;
 179                 }
 180         return ret;
 181         }
 182
 183 void ENGINE_load_openssl(void)
 184         {
 185         ENGINE *toadd = engine_openssl();
 186         if(!toadd) return;
 187         ENGINE_add(toadd);
 188         /* If the "add" worked, it gets a structural reference. So either way,
 189          * we release our just-created reference. */
 190         ENGINE_free(toadd);
 191         ERR_clear_error();
 192         }
 193
 194 /* This stuff is needed if this ENGINE is being compiled into a self-contained
 195  * shared-library. */
 196 #ifdef ENGINE_DYNAMIC_SUPPORT
 197 static int bind_fn(ENGINE *e, const char *id)
 198         {
 199         if(id && (strcmp(id, engine_openssl_id) != 0))
 200                 return 0;
 201         if(!bind_helper(e))
 202                 return 0;
 203         return 1;
 204         }
 205 IMPLEMENT_DYNAMIC_CHECK_FN()
 206 IMPLEMENT_DYNAMIC_BIND_FN(bind_fn)
 207 #endif /* ENGINE_DYNAMIC_SUPPORT */
 208
 209 #ifdef TEST_ENG_OPENSSL_RC4
 210 /* This section of code compiles an "alternative implementation" of two modes of
 211  * RC4 into this ENGINE. The result is that EVP_CIPHER operation for "rc4"
 212  * should under normal circumstances go via this support rather than the default
 213  * EVP support. There are other symbols to tweak the testing;
 214  *    TEST_ENC_OPENSSL_RC4_OTHERS - print a one line message to stderr each time
 215  *        we're asked for a cipher we don't support (should not happen).
 216  *    TEST_ENG_OPENSSL_RC4_P_INIT - print a one line message to stderr each time
 217  *        the "init_key" handler is called.
 218  *    TEST_ENG_OPENSSL_RC4_P_CIPHER - ditto for the "cipher" handler.
 219  */
 220 #include <openssl/rc4.h>
 221 #define TEST_RC4_KEY_SIZE               16
 222 static int test_cipher_nids[] = {NID_rc4,NID_rc4_40};
 223 static int test_cipher_nids_number = 2;
 224 typedef struct {
 225         unsigned char key[TEST_RC4_KEY_SIZE];
 226         RC4_KEY ks;
 227         } TEST_RC4_KEY;
 228 #define test(ctx) ((TEST_RC4_KEY *)(ctx)->cipher_data)
 229 static int test_rc4_init_key(EVP_CIPHER_CTX *ctx, const unsigned char *key,
 230                         const unsigned char *iv, int enc)
 231         {
 232 #ifdef TEST_ENG_OPENSSL_RC4_P_INIT
 233         fprintf(stderr, "(TEST_ENG_OPENSSL_RC4) test_init_key() called\n");
 234 #endif
 235         memcpy(&test(ctx)->key[0],key,EVP_CIPHER_CTX_key_length(ctx));
 236         RC4_set_key(&test(ctx)->ks,EVP_CIPHER_CTX_key_length(ctx),
 237                 test(ctx)->key);
 238         return 1;
 239         }
 240 static int test_rc4_cipher(EVP_CIPHER_CTX *ctx, unsigned char *out,
 241                       const unsigned char *in, size_t inl)
 242         {
 243 #ifdef TEST_ENG_OPENSSL_RC4_P_CIPHER
 244         fprintf(stderr, "(TEST_ENG_OPENSSL_RC4) test_cipher() called\n");
 245 #endif
 246         RC4(&test(ctx)->ks,inl,in,out);
 247         return 1;
 248         }
 249 static const EVP_CIPHER test_r4_cipher=
 250         {
 251         NID_rc4,
 252         1,TEST_RC4_KEY_SIZE,0,
 253         EVP_CIPH_VARIABLE_LENGTH,
 254         test_rc4_init_key,
 255         test_rc4_cipher,
 256         NULL,
 257         sizeof(TEST_RC4_KEY),
 258         NULL,
 259         NULL,
 260         NULL,
 261         NULL
 262         };
 263 static const EVP_CIPHER test_r4_40_cipher=
 264         {
 265         NID_rc4_40,
 266         1,5 /* 40 bit */,0,
 267         EVP_CIPH_VARIABLE_LENGTH,
 268         test_rc4_init_key,
 269         test_rc4_cipher,
 270         NULL,
 271         sizeof(TEST_RC4_KEY),
 272         NULL,
 273         NULL,
 274         NULL,
 275         NULL
 276         };
 277 static int openssl_ciphers(ENGINE *e, const EVP_CIPHER **cipher,
 278                         const int **nids, int nid)
 279         {
 280         if(!cipher)
 281                 {
 282                 /* We are returning a list of supported nids */
 283                 *nids = test_cipher_nids;
 284                 return test_cipher_nids_number;
 285                 }
 286         /* We are being asked for a specific cipher */
 287         if(nid == NID_rc4)
 288                 *cipher = &test_r4_cipher;
 289         else if(nid == NID_rc4_40)
 290                 *cipher = &test_r4_40_cipher;
 291         else
 292                 {
 293 #ifdef TEST_ENG_OPENSSL_RC4_OTHERS
 294                 fprintf(stderr, "(TEST_ENG_OPENSSL_RC4) returning NULL for "
 295                                 "nid %d\n", nid);
 296 #endif
 297                 *cipher = NULL;
 298                 return 0;
 299                 }
 300         return 1;
 301         }
 302 #endif
 303
 304 #ifdef TEST_ENG_OPENSSL_SHA
 305 /* Much the same sort of comment as for TEST_ENG_OPENSSL_RC4 */
 306 #include <openssl/sha.h>
 307 static int test_digest_nids[] = {NID_sha1};
 308 static int test_digest_nids_number = 1;
 309 static int test_sha1_init(EVP_MD_CTX *ctx)
 310         {
 311 #ifdef TEST_ENG_OPENSSL_SHA_P_INIT
 312         fprintf(stderr, "(TEST_ENG_OPENSSL_SHA) test_sha1_init() called\n");
 313 #endif
 314         return SHA1_Init(ctx->md_data);
 315         }
 316 static int test_sha1_update(EVP_MD_CTX *ctx,const void *data,size_t count)
 317         {
 318 #ifdef TEST_ENG_OPENSSL_SHA_P_UPDATE
 319         fprintf(stderr, "(TEST_ENG_OPENSSL_SHA) test_sha1_update() called\n");
 320 #endif
 321         return SHA1_Update(ctx->md_data,data,count);
 322         }
 323 static int test_sha1_final(EVP_MD_CTX *ctx,unsigned char *md)
 324         {
 325 #ifdef TEST_ENG_OPENSSL_SHA_P_FINAL
 326         fprintf(stderr, "(TEST_ENG_OPENSSL_SHA) test_sha1_final() called\n");
 327 #endif
 328         return SHA1_Final(md,ctx->md_data);
 329         }
 330 static const EVP_MD test_sha_md=
 331         {
 332         NID_sha1,
 333         NID_sha1WithRSAEncryption,
 334         SHA_DIGEST_LENGTH,
 335         0,
 336         test_sha1_init,
 337         test_sha1_update,
 338         test_sha1_final,
 339         NULL,
 340         NULL,
 341         EVP_PKEY_RSA_method,
 342         SHA_CBLOCK,
 343         sizeof(EVP_MD *)+sizeof(SHA_CTX),
 344         };
 345 static int openssl_digests(ENGINE *e, const EVP_MD **digest,
 346                         const int **nids, int nid)
 347         {
 348         if(!digest)
 349                 {
 350                 /* We are returning a list of supported nids */
 351                 *nids = test_digest_nids;
 352                 return test_digest_nids_number;
 353                 }
 354         /* We are being asked for a specific digest */
 355         if(nid == NID_sha1)
 356                 *digest = &test_sha_md;
 357         else
 358                 {
 359 #ifdef TEST_ENG_OPENSSL_SHA_OTHERS
 360                 fprintf(stderr, "(TEST_ENG_OPENSSL_SHA) returning NULL for "
 361                                 "nid %d\n", nid);
 362 #endif
 363                 *digest = NULL;
 364                 return 0;
 365                 }
 366         return 1;
 367         }
 368 #endif
 369
 370 #ifdef TEST_ENG_OPENSSL_PKEY
 371 static EVP_PKEY *openssl_load_privkey(ENGINE *eng, const char *key_id,
 372         UI_METHOD *ui_method, void *callback_data)
 373         {
 374         BIO *in;
 375         EVP_PKEY *key;
 376         fprintf(stderr, "(TEST_ENG_OPENSSL_PKEY)Loading Private key %s\n", key_id);
 377         in = BIO_new_file(key_id, "r");
 378         if (!in)
 379                 return NULL;
 380         key = PEM_read_bio_PrivateKey(in, NULL, 0, NULL);
 381         BIO_free(in);
 382         return key;
 383         }
 384 #endif