configs/imx6ul_geam_nand_defconfig

   1 CONFIG_ARM=y
   2 CONFIG_ARCH_MX6=y
   3 CONFIG_TEXT_BASE=0x87800000
   4 CONFIG_SYS_MALLOC_LEN=0x1000000
   5 CONFIG_SPL_GPIO=y
   6 CONFIG_SPL_LIBCOMMON_SUPPORT=y
   7 CONFIG_SPL_LIBGENERIC_SUPPORT=y
   8 CONFIG_NR_DRAM_BANKS=1
   9 CONFIG_ENV_SIZE=0x20000
  10 CONFIG_ENV_OFFSET=0x400000
  11 CONFIG_MX6UL=y
  12 CONFIG_TARGET_MX6UL_ENGICAM=y
  13 CONFIG_DEFAULT_DEVICE_TREE="imx6ul-geam"
  14 CONFIG_SPL_SERIAL=y
  15 CONFIG_SPL=y
  16 # CONFIG_CMD_BMODE is not set
  17 CONFIG_SYS_MEMTEST_START=0x80000000
  18 CONFIG_SYS_MEMTEST_END=0x88000000
  19 CONFIG_FIT=y
  20 CONFIG_FIT_SIGNATURE=y
  21 CONFIG_FIT_VERBOSE=y
  22 CONFIG_LEGACY_IMAGE_FORMAT=y
  23 CONFIG_SUPPORT_RAW_INITRD=y
  24 CONFIG_BOOTDELAY=3
  25 CONFIG_USE_BOOTCOMMAND=y
  26 CONFIG_BOOTCOMMAND="run $modeboot"
  27 CONFIG_SYS_PBSIZE=538
  28 CONFIG_SPL_SYS_MALLOC=y
  29 CONFIG_SPL_DMA=y
  30 CONFIG_SPL_NAND_SUPPORT=y
  31 CONFIG_SPL_WATCHDOG=y
  32 CONFIG_HUSH_PARSER=y
  33 CONFIG_SYS_PROMPT="geam6ul> "
  34 CONFIG_SYS_MAXARGS=32
  35 CONFIG_CRC32_VERIFY=y
  36 CONFIG_CMD_MEMTEST=y
  37 CONFIG_CMD_GPIO=y
  38 CONFIG_CMD_I2C=y
  39 CONFIG_CMD_MMC=y
  40 CONFIG_CMD_MII=y
  41 CONFIG_CMD_PING=y
  42 CONFIG_CMD_CACHE=y
  43 CONFIG_CMD_EXT4=y
  44 CONFIG_CMD_EXT4_WRITE=y
  45 CONFIG_CMD_FAT=y
  46 CONFIG_CMD_FS_GENERIC=y
  47 CONFIG_CMD_MTDPARTS=y
  48 CONFIG_MTDIDS_DEFAULT="nand0=gpmi-nand"
  49 CONFIG_MTDPARTS_DEFAULT="mtdparts=gpmi-nand:2m(spl),2m(uboot),1m(env),8m(kernel),1m(dtb),-(rootfs)"
  50 CONFIG_CMD_UBI=y
  51 CONFIG_ENV_OVERWRITE=y
  52 CONFIG_ENV_IS_IN_NAND=y
  53 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
  54 CONFIG_BOUNCE_BUFFER=y
  55 CONFIG_SYS_I2C_MXC=y
  56 CONFIG_FSL_USDHC=y
  57 CONFIG_MTD=y
  58 CONFIG_MTD_RAW_NAND=y
  59 CONFIG_NAND_MXS=y
  60 CONFIG_SYS_NAND_ONFI_DETECTION=y
  61 CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
  62 CONFIG_SYS_NAND_U_BOOT_OFFS=0x200000
  63 CONFIG_PHYLIB=y
  64 CONFIG_PHY_SMSC=y
  65 CONFIG_FEC_MXC=y
  66 CONFIG_MII=y
  67 CONFIG_PINCTRL=y
  68 CONFIG_PINCTRL_IMX6=y
  69 CONFIG_MXC_UART=y
  70 CONFIG_IMX_THERMAL=y