configs/kontron_sl28_defconfig

   1 CONFIG_ARM=y
   2 CONFIG_COUNTER_FREQUENCY=25000000
   3 CONFIG_TARGET_SL28=y
   4 CONFIG_SYS_MALLOC_LEN=0x202000
   5 CONFIG_SYS_MALLOC_F_LEN=0x4000
   6 CONFIG_SPL_LIBCOMMON_SUPPORT=y
   7 CONFIG_SPL_LIBGENERIC_SUPPORT=y
   8 CONFIG_NR_DRAM_BANKS=2
   9 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
  10 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1800eff0
  11 CONFIG_ENV_SIZE=0x2000
  12 CONFIG_ENV_OFFSET=0x3e0000
  13 CONFIG_ENV_SECT_SIZE=0x10000
  14 CONFIG_DEFAULT_DEVICE_TREE="freescale/fsl-ls1028a-kontron-sl28"
  15 CONFIG_SYS_FSL_SDHC_CLK_DIV=1
  16 CONFIG_OF_LIBFDT_OVERLAY=y
  17 CONFIG_SYS_MONITOR_LEN=1048576
  18 CONFIG_SPL_MMC=y
  19 CONFIG_SPL_SERIAL=y
  20 CONFIG_SPL_STACK=0x18009ff0
  21 CONFIG_SPL_TEXT_BASE=0x18010000
  22 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
  23 CONFIG_SPL_BSS_START_ADDR=0x80100000
  24 CONFIG_SPL_BSS_MAX_SIZE=0x100000
  25 CONFIG_SYS_BOOTM_LEN=0x800000
  26 CONFIG_SYS_LOAD_ADDR=0x82000000
  27 CONFIG_SPL_SIZE_LIMIT=0x20000
  28 CONFIG_SPL=y
  29 CONFIG_ENV_OFFSET_REDUND=0x3f0000
  30 CONFIG_SPL_SPI_FLASH_SUPPORT=y
  31 CONFIG_SPL_SPI=y
  32 # CONFIG_PSCI_RESET is not set
  33 CONFIG_ARMV8_PSCI=y
  34 CONFIG_ARMV8_PSCI_RELOCATE=y
  35 CONFIG_AHCI=y
  36 CONFIG_SYS_FSL_NUM_CC_PLLS=3
  37 CONFIG_MP=y
  38 CONFIG_EFI_SET_TIME=y
  39 CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y
  40 CONFIG_EFI_CAPSULE_FIRMWARE_FIT=y
  41 CONFIG_FIT=y
  42 CONFIG_SPL_LOAD_FIT=y
  43 CONFIG_DISTRO_DEFAULTS=y
  44 CONFIG_BOOTDELAY=10
  45 CONFIG_OF_BOARD_SETUP=y
  46 CONFIG_OF_STDOUT_VIA_ALIAS=y
  47 CONFIG_USE_BOOTARGS=y
  48 CONFIG_SYS_CBSIZE=256
  49 CONFIG_SYS_PBSIZE=276
  50 CONFIG_BOARD_LATE_INIT=y
  51 # CONFIG_HWCONFIG is not set
  52 CONFIG_PCI_INIT_R=y
  53 CONFIG_SPL_MAX_SIZE=0x20000
  54 CONFIG_SPL_BOARD_INIT=y
  55 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
  56 CONFIG_SPL_SYS_MALLOC=y
  57 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
  58 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x900
  59 CONFIG_SPL_MPC8XXX_INIT_DDR=y
  60 CONFIG_SPL_SPI_LOAD=y
  61 CONFIG_CMDLINE_PS_SUPPORT=y
  62 CONFIG_CMD_ASKENV=y
  63 CONFIG_CMD_GREPENV=y
  64 CONFIG_CMD_NVEDIT_EFI=y
  65 CONFIG_CMD_DFU=y
  66 CONFIG_CMD_GPIO=y
  67 CONFIG_CMD_GPT=y
  68 CONFIG_CMD_I2C=y
  69 CONFIG_CMD_MMC=y
  70 CONFIG_CMD_PCI=y
  71 CONFIG_CMD_USB=y
  72 CONFIG_CMD_USB_MASS_STORAGE=y
  73 CONFIG_CMD_WDT=y
  74 CONFIG_CMD_CACHE=y
  75 CONFIG_CMD_EFIDEBUG=y
  76 CONFIG_CMD_RNG=y
  77 CONFIG_OF_CONTROL=y
  78 CONFIG_SPL_OF_CONTROL=y
  79 CONFIG_OF_UPSTREAM=y
  80 CONFIG_OF_LIST="freescale/fsl-ls1028a-kontron-sl28 freescale/fsl-ls1028a-kontron-sl28-var1 freescale/fsl-ls1028a-kontron-sl28-var2 freescale/fsl-ls1028a-kontron-sl28-var4"
  81 CONFIG_ENV_OVERWRITE=y
  82 CONFIG_ENV_IS_IN_SPI_FLASH=y
  83 CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
  84 CONFIG_SYS_RX_ETH_BUFFER=8
  85 CONFIG_SPL_DM_SEQ_ALIAS=y
  86 CONFIG_SATA=y
  87 CONFIG_SCSI_AHCI=y
  88 CONFIG_SATA_CEVA=y
  89 CONFIG_FSL_CAAM=y
  90 CONFIG_SYS_FSL_DDR3=y
  91 CONFIG_DDR_ECC=y
  92 CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
  93 CONFIG_DFU_MMC=y
  94 CONFIG_DFU_SF=y
  95 CONFIG_SL28CPLD_GPIO=y
  96 CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
  97 CONFIG_I2C_MUX=y
  98 CONFIG_SL28CPLD=y
  99 CONFIG_MMC_HS400_SUPPORT=y
 100 CONFIG_FSL_ESDHC=y
 101 CONFIG_FSL_ESDHC_SUPPORT_ADMA2=y
 102 # CONFIG_SPI_FLASH_UNLOCK_ALL is not set
 103 CONFIG_SPI_FLASH_WINBOND=y
 104 # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
 105 CONFIG_PHYLIB=y
 106 CONFIG_PHY_ATHEROS=y
 107 CONFIG_PHY_FIXED=y
 108 CONFIG_DM_DSA=y
 109 CONFIG_PHY_GIGE=y
 110 CONFIG_E1000=y
 111 CONFIG_MSCC_FELIX_SWITCH=y
 112 CONFIG_NVME_PCI=y
 113 CONFIG_PCIE_ECAM_GENERIC=y
 114 CONFIG_PCIE_LAYERSCAPE_RC=y
 115 CONFIG_RTC_RV8803=y
 116 CONFIG_SYS_NS16550=y
 117 CONFIG_SPI=y
 118 CONFIG_FSL_DSPI=y
 119 CONFIG_NXP_FSPI=y
 120 CONFIG_USB=y
 121 # CONFIG_SPL_DM_USB is not set
 122 CONFIG_DM_USB_GADGET=y
 123 CONFIG_USB_XHCI_HCD=y
 124 # CONFIG_USB_XHCI_FSL is not set
 125 CONFIG_USB_DWC3=y
 126 CONFIG_USB_DWC3_LAYERSCAPE=y
 127 CONFIG_USB_GADGET=y
 128 CONFIG_USB_GADGET_DOWNLOAD=y
 129 # CONFIG_WATCHDOG is not set
 130 # CONFIG_WATCHDOG_AUTOSTART is not set
 131 CONFIG_WDT=y
 132 CONFIG_WDT_SL28CPLD=y
 133 CONFIG_WDT_SP805=y