include/configs/T104xRDB.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2014 Freescale Semiconductor, Inc.
   4  * Copyright 2020-2023 NXP
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 #include <linux/stringify.h>
  11
  12 /*
  13  * T104x RDB board configuration file
  14  */
  15 #include <asm/config_mpc85xx.h>
  16
  17 #ifdef CONFIG_RAMBOOT_PBL
  18 #define RESET_VECTOR_OFFSET             0x27FFC
  19 #define BOOT_PAGE_OFFSET                0x27000
  20
  21 #ifdef CONFIG_MTD_RAW_NAND
  22 #ifdef CONFIG_NXP_ESBC
  23 #define CFG_SYS_NAND_U_BOOT_SIZE        ((768 << 10) + (16 << 10))
  24 #else
  25 #define CFG_SYS_NAND_U_BOOT_SIZE        (768 << 10)
  26 #endif
  27 #define CFG_SYS_NAND_U_BOOT_DST 0x30000000
  28 #define CFG_SYS_NAND_U_BOOT_START       0x30000000
  29 #endif
  30
  31 #ifdef CONFIG_SPIFLASH
  32 #define CFG_RESET_VECTOR_ADDRESS                0x30000FFC
  33 #define CFG_SYS_SPI_FLASH_U_BOOT_SIZE   (768 << 10)
  34 #define CFG_SYS_SPI_FLASH_U_BOOT_DST            (0x30000000)
  35 #define CFG_SYS_SPI_FLASH_U_BOOT_START  (0x30000000)
  36 #define CFG_SYS_SPI_FLASH_U_BOOT_OFFS   (256 << 10)
  37 #endif
  38
  39 #ifdef CONFIG_SDCARD
  40 #define CFG_RESET_VECTOR_ADDRESS                0x30000FFC
  41 #define CFG_SYS_MMC_U_BOOT_SIZE (768 << 10)
  42 #define CFG_SYS_MMC_U_BOOT_DST  (0x30000000)
  43 #define CFG_SYS_MMC_U_BOOT_START        (0x30000000)
  44 #define CFG_SYS_MMC_U_BOOT_OFFS (260 << 10)
  45 #endif
  46
  47 #endif
  48
  49 /* High Level Configuration Options */
  50
  51 #ifndef CFG_RESET_VECTOR_ADDRESS
  52 #define CFG_RESET_VECTOR_ADDRESS        0xeffffffc
  53 #endif
  54
  55 #define CFG_SYS_NUM_CPC         CONFIG_SYS_NUM_DDR_CTLRS
  56
  57 /*
  58  * These can be toggled for performance analysis, otherwise use default.
  59  */
  60 #define CFG_SYS_INIT_L2CSR0             L2CSR0_L2E
  61
  62 /*
  63  *  Config the L3 Cache as L3 SRAM
  64  */
  65 #define CFG_SYS_INIT_L3_ADDR            0xFFFC0000
  66 /*
  67  * For Secure Boot CFG_SYS_INIT_L3_ADDR will be redefined and hence
  68  * Physical address (CFG_SYS_INIT_L3_ADDR) and virtual address
  69  * (CFG_SYS_INIT_L3_VADDR) will be different.
  70  */
  71 #define CFG_SYS_INIT_L3_VADDR   0xFFFC0000
  72 #define SPL_ENV_ADDR                    (CONFIG_SPL_GD_ADDR + 4 * 1024)
  73
  74 #define CFG_SYS_DCSRBAR         0xf0000000
  75 #define CFG_SYS_DCSRBAR_PHYS            0xf00000000ull
  76
  77 /*
  78  * DDR Setup
  79  */
  80 #define CFG_SYS_DDR_SDRAM_BASE  0x00000000
  81 #define CFG_SYS_SDRAM_BASE              CFG_SYS_DDR_SDRAM_BASE
  82
  83 #define SPD_EEPROM_ADDRESS      0x51
  84
  85 #define CFG_SYS_SDRAM_SIZE      4096    /* for fixed parameter use */
  86
  87 /*
  88  * IFC Definitions
  89  */
  90 #define CFG_SYS_FLASH_BASE      0xe8000000
  91 #define CFG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CFG_SYS_FLASH_BASE)
  92
  93 #define CFG_SYS_NOR_CSPR_EXT    (0xf)
  94 #define CFG_SYS_NOR_CSPR        (CSPR_PHYS_ADDR(CFG_SYS_FLASH_BASE) | \
  95                                 CSPR_PORT_SIZE_16 | \
  96                                 CSPR_MSEL_NOR | \
  97                                 CSPR_V)
  98 #define CFG_SYS_NOR_AMASK       IFC_AMASK(128*1024*1024)
  99
 100 /*
 101  * TDM Definition
 102  */
 103 #define T1040_TDM_QUIRK_CCSR_BASE       0xfe000000
 104
 105 /* NOR Flash Timing Params */
 106 #define CFG_SYS_NOR_CSOR        CSOR_NAND_TRHZ_80
 107 #define CFG_SYS_NOR_FTIM0       (FTIM0_NOR_TACSE(0x4) | \
 108                                 FTIM0_NOR_TEADC(0x5) | \
 109                                 FTIM0_NOR_TEAHC(0x5))
 110 #define CFG_SYS_NOR_FTIM1       (FTIM1_NOR_TACO(0x35) | \
 111                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 112                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 113 #define CFG_SYS_NOR_FTIM2       (FTIM2_NOR_TCS(0x4) | \
 114                                 FTIM2_NOR_TCH(0x4) | \
 115                                 FTIM2_NOR_TWPH(0x0E) | \
 116                                 FTIM2_NOR_TWP(0x1c))
 117 #define CFG_SYS_NOR_FTIM3       0x0
 118
 119 #define CFG_SYS_FLASH_BANKS_LIST        {CFG_SYS_FLASH_BASE_PHYS}
 120
 121 /* CPLD on IFC */
 122 #define CPLD_LBMAP_MASK                 0x3F
 123 #define CPLD_BANK_SEL_MASK              0x07
 124 #define CPLD_BANK_OVERRIDE              0x40
 125 #define CPLD_LBMAP_ALTBANK              0x44 /* BANK OR | BANK 4 */
 126 #define CPLD_LBMAP_DFLTBANK             0x40 /* BANK OR | BANK0 */
 127 #define CPLD_LBMAP_RESET                0xFF
 128 #define CPLD_LBMAP_SHIFT                0x03
 129
 130 #if defined(CONFIG_TARGET_T1042D4RDB)
 131 #define CPLD_DIU_SEL_DFP                0xc0
 132 #endif
 133
 134 #define CFG_SYS_CPLD_BASE       0xffdf0000
 135 #define CFG_SYS_CPLD_BASE_PHYS  (0xf00000000ull | CFG_SYS_CPLD_BASE)
 136 #define CFG_SYS_CSPR2_EXT       (0xf)
 137 #define CFG_SYS_CSPR2   (CSPR_PHYS_ADDR(CFG_SYS_CPLD_BASE_PHYS) \
 138                                 | CSPR_PORT_SIZE_8 \
 139                                 | CSPR_MSEL_GPCM \
 140                                 | CSPR_V)
 141 #define CFG_SYS_AMASK2  IFC_AMASK(64*1024)
 142 #define CFG_SYS_CSOR2   0x0
 143 /* CPLD Timing parameters for IFC CS2 */
 144 #define CFG_SYS_CS2_FTIM0               (FTIM0_GPCM_TACSE(0x0e) | \
 145                                         FTIM0_GPCM_TEADC(0x0e) | \
 146                                         FTIM0_GPCM_TEAHC(0x0e))
 147 #define CFG_SYS_CS2_FTIM1               (FTIM1_GPCM_TACO(0x0e) | \
 148                                         FTIM1_GPCM_TRAD(0x1f))
 149 #define CFG_SYS_CS2_FTIM2               (FTIM2_GPCM_TCS(0x0e) | \
 150                                         FTIM2_GPCM_TCH(0x8) | \
 151                                         FTIM2_GPCM_TWP(0x1f))
 152 #define CFG_SYS_CS2_FTIM3               0x0
 153
 154 /* NAND Flash on IFC */
 155 #define CFG_SYS_NAND_BASE               0xff800000
 156 #define CFG_SYS_NAND_BASE_PHYS  (0xf00000000ull | CFG_SYS_NAND_BASE)
 157
 158 #define CFG_SYS_NAND_CSPR_EXT   (0xf)
 159 #define CFG_SYS_NAND_CSPR       (CSPR_PHYS_ADDR(CFG_SYS_NAND_BASE_PHYS) \
 160                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 161                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 162                                 | CSPR_V)
 163 #define CFG_SYS_NAND_AMASK      IFC_AMASK(64*1024)
 164
 165 #define CFG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 166                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 167                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 168                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
 169                                 | CSOR_NAND_PGS_4K      /* Page Size = 4K */ \
 170                                 | CSOR_NAND_SPRZ_224/* Spare size = 224 */ \
 171                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 172
 173 /* ONFI NAND Flash mode0 Timing Params */
 174 #define CFG_SYS_NAND_FTIM0              (FTIM0_NAND_TCCST(0x07) | \
 175                                         FTIM0_NAND_TWP(0x18)   | \
 176                                         FTIM0_NAND_TWCHT(0x07) | \
 177                                         FTIM0_NAND_TWH(0x0a))
 178 #define CFG_SYS_NAND_FTIM1              (FTIM1_NAND_TADLE(0x32) | \
 179                                         FTIM1_NAND_TWBE(0x39)  | \
 180                                         FTIM1_NAND_TRR(0x0e)   | \
 181                                         FTIM1_NAND_TRP(0x18))
 182 #define CFG_SYS_NAND_FTIM2              (FTIM2_NAND_TRAD(0x0f) | \
 183                                         FTIM2_NAND_TREH(0x0a) | \
 184                                         FTIM2_NAND_TWHRE(0x1e))
 185 #define CFG_SYS_NAND_FTIM3              0x0
 186
 187 #define CFG_SYS_NAND_BASE_LIST  { CFG_SYS_NAND_BASE }
 188
 189 #if defined(CONFIG_MTD_RAW_NAND)
 190 #define CFG_SYS_CSPR0_EXT               CFG_SYS_NAND_CSPR_EXT
 191 #define CFG_SYS_CSPR0           CFG_SYS_NAND_CSPR
 192 #define CFG_SYS_AMASK0          CFG_SYS_NAND_AMASK
 193 #define CFG_SYS_CSOR0           CFG_SYS_NAND_CSOR
 194 #define CFG_SYS_CS0_FTIM0               CFG_SYS_NAND_FTIM0
 195 #define CFG_SYS_CS0_FTIM1               CFG_SYS_NAND_FTIM1
 196 #define CFG_SYS_CS0_FTIM2               CFG_SYS_NAND_FTIM2
 197 #define CFG_SYS_CS0_FTIM3               CFG_SYS_NAND_FTIM3
 198 #define CFG_SYS_CSPR1_EXT               CFG_SYS_NOR_CSPR_EXT
 199 #define CFG_SYS_CSPR1           CFG_SYS_NOR_CSPR
 200 #define CFG_SYS_AMASK1          CFG_SYS_NOR_AMASK
 201 #define CFG_SYS_CSOR1           CFG_SYS_NOR_CSOR
 202 #define CFG_SYS_CS1_FTIM0               CFG_SYS_NOR_FTIM0
 203 #define CFG_SYS_CS1_FTIM1               CFG_SYS_NOR_FTIM1
 204 #define CFG_SYS_CS1_FTIM2               CFG_SYS_NOR_FTIM2
 205 #define CFG_SYS_CS1_FTIM3               CFG_SYS_NOR_FTIM3
 206 #else
 207 #define CFG_SYS_CSPR0_EXT               CFG_SYS_NOR_CSPR_EXT
 208 #define CFG_SYS_CSPR0           CFG_SYS_NOR_CSPR
 209 #define CFG_SYS_AMASK0          CFG_SYS_NOR_AMASK
 210 #define CFG_SYS_CSOR0           CFG_SYS_NOR_CSOR
 211 #define CFG_SYS_CS0_FTIM0               CFG_SYS_NOR_FTIM0
 212 #define CFG_SYS_CS0_FTIM1               CFG_SYS_NOR_FTIM1
 213 #define CFG_SYS_CS0_FTIM2               CFG_SYS_NOR_FTIM2
 214 #define CFG_SYS_CS0_FTIM3               CFG_SYS_NOR_FTIM3
 215 #define CFG_SYS_CSPR1_EXT               CFG_SYS_NAND_CSPR_EXT
 216 #define CFG_SYS_CSPR1           CFG_SYS_NAND_CSPR
 217 #define CFG_SYS_AMASK1          CFG_SYS_NAND_AMASK
 218 #define CFG_SYS_CSOR1           CFG_SYS_NAND_CSOR
 219 #define CFG_SYS_CS1_FTIM0               CFG_SYS_NAND_FTIM0
 220 #define CFG_SYS_CS1_FTIM1               CFG_SYS_NAND_FTIM1
 221 #define CFG_SYS_CS1_FTIM2               CFG_SYS_NAND_FTIM2
 222 #define CFG_SYS_CS1_FTIM3               CFG_SYS_NAND_FTIM3
 223 #endif
 224
 225 /* define to use L1 as initial stack */
 226 #define CFG_SYS_INIT_RAM_ADDR   0xfdd00000      /* Initial L1 address */
 227 #define CFG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
 228 #define CFG_SYS_INIT_RAM_ADDR_PHYS_LOW  0xfe03c000
 229 /* The assembler doesn't like typecast */
 230 #define CFG_SYS_INIT_RAM_ADDR_PHYS \
 231         ((CFG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 232           CFG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 233 #define CFG_SYS_INIT_RAM_SIZE           0x00004000
 234
 235 #define CFG_SYS_INIT_SP_OFFSET  (CFG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 236
 237 /* Serial Port - controlled on board with jumper J8
 238  * open - index 2
 239  * shorted - index 1
 240  */
 241 #if !CONFIG_IS_ENABLED(DM_SERIAL)
 242 #define CFG_SYS_NS16550_CLK             (get_bus_freq(0)/2)
 243 #endif
 244
 245 #define CFG_SYS_BAUDRATE_TABLE  \
 246         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 247
 248 #define CFG_SYS_NS16550_COM1    (CFG_SYS_CCSRBAR+0x11C500)
 249 #define CFG_SYS_NS16550_COM2    (CFG_SYS_CCSRBAR+0x11C600)
 250 #define CFG_SYS_NS16550_COM3    (CFG_SYS_CCSRBAR+0x11D500)
 251 #define CFG_SYS_NS16550_COM4    (CFG_SYS_CCSRBAR+0x11D600)
 252
 253 /* I2C bus multiplexer */
 254 #define I2C_MUX_PCA_ADDR                0x70
 255 #define I2C_MUX_CH_DEFAULT      0x8
 256
 257 #if defined(CONFIG_TARGET_T1042D4RDB)
 258 /*
 259  * RTC configuration
 260  */
 261 #define CFG_SYS_I2C_RTC_ADDR         0x68
 262
 263 #endif
 264
 265 /*
 266  * eSPI - Enhanced SPI
 267  */
 268
 269 /*
 270  * General PCI
 271  * Memory space is mapped 1-1, but I/O space must start from 0.
 272  */
 273
 274 #ifdef CONFIG_PCI
 275 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 276 #ifdef CONFIG_PCIE1
 277 #define CFG_SYS_PCIE1_MEM_VIRT  0x80000000
 278 #define CFG_SYS_PCIE1_MEM_PHYS  0xc00000000ull
 279 #define CFG_SYS_PCIE1_IO_VIRT   0xf8000000
 280 #define CFG_SYS_PCIE1_IO_PHYS   0xff8000000ull
 281 #endif
 282
 283 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 284 #ifdef CONFIG_PCIE2
 285 #define CFG_SYS_PCIE2_MEM_VIRT  0x90000000
 286 #define CFG_SYS_PCIE2_MEM_PHYS  0xc10000000ull
 287 #define CFG_SYS_PCIE2_IO_VIRT   0xf8010000
 288 #define CFG_SYS_PCIE2_IO_PHYS   0xff8010000ull
 289 #endif
 290
 291 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 292 #ifdef CONFIG_PCIE3
 293 #define CFG_SYS_PCIE3_MEM_VIRT  0xa0000000
 294 #define CFG_SYS_PCIE3_MEM_PHYS  0xc20000000ull
 295 #endif
 296
 297 /* controller 4, Base address 203000 */
 298 #ifdef CONFIG_PCIE4
 299 #define CFG_SYS_PCIE4_MEM_VIRT  0xb0000000
 300 #define CFG_SYS_PCIE4_MEM_PHYS  0xc30000000ull
 301 #endif
 302 #endif  /* CONFIG_PCI */
 303
 304 /*
 305 * USB
 306 */
 307
 308 #ifdef CONFIG_MMC
 309 #define CFG_SYS_FSL_ESDHC_ADDR       CFG_SYS_MPC85xx_ESDHC_ADDR
 310 #endif
 311
 312 /* Qman/Bman */
 313 #ifndef CONFIG_NOBQFMAN
 314 #define CFG_SYS_BMAN_NUM_PORTALS        10
 315 #define CFG_SYS_BMAN_MEM_BASE   0xf4000000
 316 #define CFG_SYS_BMAN_MEM_PHYS   0xff4000000ull
 317 #define CFG_SYS_BMAN_MEM_SIZE   0x02000000
 318 #define CFG_SYS_BMAN_SP_CENA_SIZE    0x4000
 319 #define CFG_SYS_BMAN_SP_CINH_SIZE    0x1000
 320 #define CFG_SYS_BMAN_CENA_BASE       CFG_SYS_BMAN_MEM_BASE
 321 #define CFG_SYS_BMAN_CENA_SIZE       (CFG_SYS_BMAN_MEM_SIZE >> 1)
 322 #define CFG_SYS_BMAN_CINH_BASE       (CFG_SYS_BMAN_MEM_BASE + \
 323                                         CFG_SYS_BMAN_CENA_SIZE)
 324 #define CFG_SYS_BMAN_CINH_SIZE       (CFG_SYS_BMAN_MEM_SIZE >> 1)
 325 #define CFG_SYS_BMAN_SWP_ISDR_REG       0xE08
 326 #define CFG_SYS_QMAN_NUM_PORTALS        10
 327 #define CFG_SYS_QMAN_MEM_BASE   0xf6000000
 328 #define CFG_SYS_QMAN_MEM_PHYS   0xff6000000ull
 329 #define CFG_SYS_QMAN_MEM_SIZE   0x02000000
 330 #define CFG_SYS_QMAN_SP_CINH_SIZE    0x1000
 331 #define CFG_SYS_QMAN_CENA_SIZE       (CFG_SYS_QMAN_MEM_SIZE >> 1)
 332 #define CFG_SYS_QMAN_CINH_BASE       (CFG_SYS_QMAN_MEM_BASE + \
 333                                         CFG_SYS_QMAN_CENA_SIZE)
 334 #define CFG_SYS_QMAN_CINH_SIZE       (CFG_SYS_QMAN_MEM_SIZE >> 1)
 335 #define CFG_SYS_QMAN_SWP_ISDR_REG       0xE08
 336 #endif /* CONFIG_NOBQFMAN */
 337
 338 #ifdef CONFIG_FMAN_ENET
 339 #if defined(CONFIG_TARGET_T1042D4RDB)
 340 #define CFG_SYS_SGMII1_PHY_ADDR             0x02
 341 #define CFG_SYS_SGMII2_PHY_ADDR             0x03
 342 #define CFG_SYS_SGMII3_PHY_ADDR             0x01
 343 #endif
 344
 345 #define CFG_SYS_RGMII1_PHY_ADDR             0x01
 346 #define CFG_SYS_RGMII2_PHY_ADDR             0x02
 347 #endif
 348
 349 /*
 350  * Miscellaneous configurable options
 351  */
 352
 353 /*
 354  * For booting Linux, the board info and command line data
 355  * have to be in the first 64 MB of memory, since this is
 356  * the maximum mapped by the Linux kernel during initialization.
 357  */
 358 #define CFG_SYS_BOOTMAPSZ       (64 << 20)      /* Initial map for Linux*/
 359
 360 /*
 361  * Dynamic MTD Partition support with mtdparts
 362  */
 363
 364 /*
 365  * Environment Configuration
 366  */
 367
 368 #define __USB_PHY_TYPE  utmi
 369 #define RAMDISKFILE     "t104xrdb/ramdisk.uboot"
 370
 371 #if defined(CONFIG_TARGET_T1042D4RDB)
 372 #define FDTFILE         "t1042rdb/t1042d4rdb.dtb"
 373 #endif
 374
 375 #define CFG_EXTRA_ENV_SETTINGS                          \
 376         "hwconfig=fsl_ddr:bank_intlv=cs0_cs1;"                  \
 377         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\
 378         "usb2:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 379         "netdev=eth0\0"                                         \
 380         "uboot=" CONFIG_UBOOTPATH "\0"          \
 381         "ubootaddr=" __stringify(CONFIG_TEXT_BASE) "\0" \
 382         "tftpflash=tftpboot $loadaddr $uboot && "               \
 383         "protect off $ubootaddr +$filesize && "                 \
 384         "erase $ubootaddr +$filesize && "                       \
 385         "cp.b $loadaddr $ubootaddr $filesize && "               \
 386         "protect on $ubootaddr +$filesize && "                  \
 387         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 388         "consoledev=ttyS0\0"                                    \
 389         "ramdiskaddr=2000000\0"                                 \
 390         "ramdiskfile=" __stringify(RAMDISKFILE) "\0"            \
 391         "fdtaddr=1e00000\0"                                     \
 392         "fdtfile=" __stringify(FDTFILE) "\0"                    \
 393         "bdev=sda3\0"
 394
 395 #include <asm/fsl_secure_boot.h>
 396
 397 #endif  /* __CONFIG_H */