include/configs/mx53ppd.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2011 Freescale Semiconductor, Inc.
   4  * Jason Liu <r64343@freescale.com>
   5  *
   6  * Configuration settings for Freescale MX53 low cost board.
   7  */
   8
   9 #ifndef __CONFIG_H
  10 #define __CONFIG_H
  11
  12 #include <asm/arch/imx-regs.h>
  13
  14 /* USB Configs */
  15 #define CFG_MXC_USB_FLAGS       0
  16
  17 /* Command definition */
  18
  19 #define PPD_CONFIG_NFS \
  20         "nfsserver=192.168.252.95\0" \
  21         "gatewayip=192.168.252.95\0" \
  22         "netmask=255.255.255.0\0" \
  23         "ipaddr=192.168.252.99\0" \
  24         "kernsize=0x2000\0" \
  25         "use_dhcp=0\0" \
  26         "nfsroot=/opt/springdale/rd\0" \
  27         "bootargs_nfs=setenv bootargs ${bootargs} root=/dev/nfs " \
  28                 "${kern_ipconf} nfsroot=${nfsserver}:${nfsroot},v3,tcp rw\0" \
  29         "choose_ip=if test $use_dhcp = 1; then setenv kern_ipconf ip=dhcp; " \
  30                 "setenv getcmd dhcp; else setenv kern_ipconf " \
  31                 "ip=${ipaddr}:${nfsserver}:${gatewayip}:${netmask}::eth0:off; " \
  32                 "setenv getcmd tftp; fi\0" \
  33         "nfs=run choose_ip setargs bootargs_nfs; ${getcmd} ${loadaddr} " \
  34                 "${nfsserver}:${image}; bootm ${loadaddr}\0" \
  35
  36 #define CFG_EXTRA_ENV_SETTINGS \
  37         PPD_CONFIG_NFS \
  38         "image=/boot/fitImage\0" \
  39         "dev=mmc\0" \
  40         "devnum=2\0" \
  41         "rootdev=mmcblk0p\0" \
  42         "quiet=quiet loglevel=0\0" \
  43         "lvds=ldb\0" \
  44         "setargs=setenv bootargs ${lvds} jtag=on mem=2G " \
  45                 "vt.global_cursor_default=0 bootcause=${bootcause} ${quiet}\0" \
  46         "bootargs_emmc=setenv bootargs root=/dev/${rootdev}${partnum} ro " \
  47                 "rootwait ${bootargs}\0" \
  48         "doquiet=" \
  49                 "if ext2load ${dev} ${devnum}:5 0x7000A000 /boot/console; " \
  50                         "then setenv quiet; fi\0" \
  51         "hasfirstboot=" \
  52                 "test -e ${dev} ${devnum}:${partnum} /boot/bootcause/firstboot\0" \
  53         "swappartitions=" \
  54                 "setexpr partnum 3 - ${partnum}\0" \
  55         "failbootcmd=" \
  56                 "cls; " \
  57                 "setcurs 5 4; " \
  58                 "lcdputs \"Monitor failed to start. " \
  59                 "Try again, or contact GE Service for support.\"; " \
  60                 "bootcount reset; " \
  61                 "while true; do sleep 1; done; \0" \
  62         "altbootcmd=" \
  63                 "run doquiet; " \
  64                 "setenv partnum 1; run hasfirstboot || setenv partnum 2; " \
  65                 "run hasfirstboot || setenv partnum 0; " \
  66                 "if test ${partnum} != 0; then " \
  67                         "run swappartitions loadimage doboot; " \
  68                 "fi; " \
  69                 "run failbootcmd\0" \
  70         "loadimage=" \
  71                 "ext2load ${dev} ${devnum}:${partnum} ${loadaddr} ${image}\0" \
  72         "doboot=" \
  73                 "echo Booting from ${dev}:${devnum}:${partnum} ...; " \
  74                 "run setargs; " \
  75                 "run bootargs_emmc; " \
  76                 "bootm ${loadaddr}\0" \
  77         "tryboot=" \
  78                 "setenv partnum 1; run hasfirstboot || setenv partnum 2; " \
  79                 "run loadimage || run swappartitions && run loadimage || " \
  80                         "setenv partnum 0 && echo MISSING IMAGE;" \
  81                 "run doboot; " \
  82                 "run failbootcmd\0" \
  83         "video-mode=" \
  84                 "lcd:800x480-24@60,monitor=lcd\0" \
  85
  86 /* Miscellaneous configurable options */
  87
  88 #define CFG_SYS_BOOTMAPSZ (256 << 20)     /* 256M */
  89
  90 /* Physical Memory Map */
  91 #define PHYS_SDRAM_1                    CSD0_BASE_ADDR
  92 #define PHYS_SDRAM_1_SIZE               (gd->bd->bi_dram[0].size)
  93 #define PHYS_SDRAM_2                    CSD1_BASE_ADDR
  94 #define PHYS_SDRAM_2_SIZE               (gd->bd->bi_dram[1].size)
  95 #define PHYS_SDRAM_SIZE                 (gd->ram_size)
  96
  97 #define CFG_SYS_SDRAM_BASE              (PHYS_SDRAM_1)
  98 #define CFG_SYS_INIT_RAM_ADDR   (IRAM_BASE_ADDR)
  99 #define CFG_SYS_INIT_RAM_SIZE   (IRAM_SIZE)
 100
 101 /* FLASH and environment organization */
 102
 103 #endif                          /* __CONFIG_H */