drivers/spi/ti_qspi.c

   1 /*
   2  * TI QSPI driver
   3  *
   4  * Copyright (C) 2013, Texas Instruments, Incorporated
   5  *
   6  * SPDX-License-Identifier: GPL-2.0+
   7  */
   8
   9 #include <common.h>
  10 #include <asm/io.h>
  11 #include <asm/arch/omap.h>
  12 #include <malloc.h>
  13 #include <spi.h>
  14 #include <asm/gpio.h>
  15 #include <asm/omap_gpio.h>
  16
  17 /* ti qpsi register bit masks */
  18 #define QSPI_TIMEOUT                    2000000
  19 #define QSPI_FCLK                       192000000
  20 /* clock control */
  21 #define QSPI_CLK_EN                     (1 << 31)
  22 #define QSPI_CLK_DIV_MAX                0xffff
  23 /* command */
  24 #define QSPI_EN_CS(n)                   (n << 28)
  25 #define QSPI_WLEN(n)                    ((n-1) << 19)
  26 #define QSPI_3_PIN                      (1 << 18)
  27 #define QSPI_RD_SNGL                    (1 << 16)
  28 #define QSPI_WR_SNGL                    (2 << 16)
  29 #define QSPI_INVAL                      (4 << 16)
  30 #define QSPI_RD_QUAD                    (7 << 16)
  31 /* device control */
  32 #define QSPI_DD(m, n)                   (m << (3 + n*8))
  33 #define QSPI_CKPHA(n)                   (1 << (2 + n*8))
  34 #define QSPI_CSPOL(n)                   (1 << (1 + n*8))
  35 #define QSPI_CKPOL(n)                   (1 << (n*8))
  36 /* status */
  37 #define QSPI_WC                         (1 << 1)
  38 #define QSPI_BUSY                       (1 << 0)
  39 #define QSPI_WC_BUSY                    (QSPI_WC | QSPI_BUSY)
  40 #define QSPI_XFER_DONE                  QSPI_WC
  41 #define MM_SWITCH                       0x01
  42 #define MEM_CS                          0x100
  43 #define MEM_CS_UNSELECT                 0xfffff0ff
  44 #define MMAP_START_ADDR_DRA             0x5c000000
  45 #define MMAP_START_ADDR_AM43x           0x30000000
  46 #define CORE_CTRL_IO                    0x4a002558
  47
  48 #define QSPI_CMD_READ                   (0x3 << 0)
  49 #define QSPI_CMD_READ_QUAD              (0x6b << 0)
  50 #define QSPI_CMD_READ_FAST              (0x0b << 0)
  51 #define QSPI_SETUP0_NUM_A_BYTES         (0x2 << 8)
  52 #define QSPI_SETUP0_NUM_D_BYTES_NO_BITS (0x0 << 10)
  53 #define QSPI_SETUP0_NUM_D_BYTES_8_BITS  (0x1 << 10)
  54 #define QSPI_SETUP0_READ_NORMAL         (0x0 << 12)
  55 #define QSPI_SETUP0_READ_QUAD           (0x3 << 12)
  56 #define QSPI_CMD_WRITE                  (0x2 << 16)
  57 #define QSPI_NUM_DUMMY_BITS             (0x0 << 24)
  58
  59 /* ti qspi register set */
  60 struct ti_qspi_regs {
  61         u32 pid;
  62         u32 pad0[3];
  63         u32 sysconfig;
  64         u32 pad1[3];
  65         u32 int_stat_raw;
  66         u32 int_stat_en;
  67         u32 int_en_set;
  68         u32 int_en_ctlr;
  69         u32 intc_eoi;
  70         u32 pad2[3];
  71         u32 clk_ctrl;
  72         u32 dc;
  73         u32 cmd;
  74         u32 status;
  75         u32 data;
  76         u32 setup0;
  77         u32 setup1;
  78         u32 setup2;
  79         u32 setup3;
  80         u32 memswitch;
  81         u32 data1;
  82         u32 data2;
  83         u32 data3;
  84 };
  85
  86 /* ti qspi slave */
  87 struct ti_qspi_slave {
  88         struct spi_slave slave;
  89         struct ti_qspi_regs *base;
  90         unsigned int mode;
  91         u32 cmd;
  92         u32 dc;
  93 };
  94
  95 static inline struct ti_qspi_slave *to_ti_qspi_slave(struct spi_slave *slave)
  96 {
  97         return container_of(slave, struct ti_qspi_slave, slave);
  98 }
  99
 100 static void ti_spi_setup_spi_register(struct ti_qspi_slave *qslave)
 101 {
 102         struct spi_slave *slave = &qslave->slave;
 103         u32 memval = 0;
 104
 105 #ifdef CONFIG_DRA7XX
 106         slave->memory_map = (void *)MMAP_START_ADDR_DRA;
 107 #else
 108         slave->memory_map = (void *)MMAP_START_ADDR_AM43x;
 109 #endif
 110
 111         memval |= QSPI_CMD_READ | QSPI_SETUP0_NUM_A_BYTES |
 112                         QSPI_SETUP0_NUM_D_BYTES_NO_BITS |
 113                         QSPI_SETUP0_READ_NORMAL | QSPI_CMD_WRITE |
 114                         QSPI_NUM_DUMMY_BITS;
 115
 116         writel(memval, &qslave->base->setup0);
 117 }
 118
 119 static void ti_spi_set_speed(struct spi_slave *slave, uint hz)
 120 {
 121         struct ti_qspi_slave *qslave = to_ti_qspi_slave(slave);
 122         uint clk_div;
 123
 124         debug("ti_spi_set_speed: hz: %d, clock divider %d\n", hz, clk_div);
 125
 126         if (!hz)
 127                 clk_div = 0;
 128         else
 129                 clk_div = (QSPI_FCLK / hz) - 1;
 130
 131         /* disable SCLK */
 132         writel(readl(&qslave->base->clk_ctrl) & ~QSPI_CLK_EN,
 133                &qslave->base->clk_ctrl);
 134
 135         /* assign clk_div values */
 136         if (clk_div < 0)
 137                 clk_div = 0;
 138         else if (clk_div > QSPI_CLK_DIV_MAX)
 139                 clk_div = QSPI_CLK_DIV_MAX;
 140
 141         /* enable SCLK */
 142         writel(QSPI_CLK_EN | clk_div, &qslave->base->clk_ctrl);
 143 }
 144
 145 int spi_cs_is_valid(unsigned int bus, unsigned int cs)
 146 {
 147         return 1;
 148 }
 149
 150 void spi_cs_activate(struct spi_slave *slave)
 151 {
 152         /* CS handled in xfer */
 153         return;
 154 }
 155
 156 void spi_cs_deactivate(struct spi_slave *slave)
 157 {
 158         struct ti_qspi_slave *qslave = to_ti_qspi_slave(slave);
 159
 160         debug("spi_cs_deactivate: 0x%08x\n", (u32)slave);
 161
 162         writel(qslave->cmd | QSPI_INVAL, &qslave->base->cmd);
 163 }
 164
 165 void spi_init(void)
 166 {
 167         /* nothing to do */
 168 }
 169
 170 struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
 171                                   unsigned int max_hz, unsigned int mode)
 172 {
 173         struct ti_qspi_slave *qslave;
 174
 175 #ifdef CONFIG_AM43XX
 176         gpio_request(CONFIG_QSPI_SEL_GPIO, "qspi_gpio");
 177         gpio_direction_output(CONFIG_QSPI_SEL_GPIO, 1);
 178 #endif
 179
 180         qslave = spi_alloc_slave(struct ti_qspi_slave, bus, cs);
 181         if (!qslave) {
 182                 printf("SPI_error: Fail to allocate ti_qspi_slave\n");
 183                 return NULL;
 184         }
 185
 186         qslave->base = (struct ti_qspi_regs *)QSPI_BASE;
 187         qslave->mode = mode;
 188
 189         ti_spi_set_speed(&qslave->slave, max_hz);
 190
 191 #ifdef CONFIG_TI_SPI_MMAP
 192         ti_spi_setup_spi_register(qslave);
 193 #endif
 194
 195         return &qslave->slave;
 196 }
 197
 198 void spi_free_slave(struct spi_slave *slave)
 199 {
 200         struct ti_qspi_slave *qslave = to_ti_qspi_slave(slave);
 201         free(qslave);
 202 }
 203
 204 int spi_claim_bus(struct spi_slave *slave)
 205 {
 206         struct ti_qspi_slave *qslave = to_ti_qspi_slave(slave);
 207
 208         debug("spi_claim_bus: bus:%i cs:%i\n", slave->bus, slave->cs);
 209
 210         qslave->dc = 0;
 211         if (qslave->mode & SPI_CPHA)
 212                 qslave->dc |= QSPI_CKPHA(slave->cs);
 213         if (qslave->mode & SPI_CPOL)
 214                 qslave->dc |= QSPI_CKPOL(slave->cs);
 215         if (qslave->mode & SPI_CS_HIGH)
 216                 qslave->dc |= QSPI_CSPOL(slave->cs);
 217
 218         writel(qslave->dc, &qslave->base->dc);
 219         writel(0, &qslave->base->cmd);
 220         writel(0, &qslave->base->data);
 221
 222         return 0;
 223 }
 224
 225 void spi_release_bus(struct spi_slave *slave)
 226 {
 227         struct ti_qspi_slave *qslave = to_ti_qspi_slave(slave);
 228
 229         debug("spi_release_bus: bus:%i cs:%i\n", slave->bus, slave->cs);
 230
 231         writel(0, &qslave->base->dc);
 232         writel(0, &qslave->base->cmd);
 233         writel(0, &qslave->base->data);
 234 }
 235
 236 int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
 237              void *din, unsigned long flags)
 238 {
 239         struct ti_qspi_slave *qslave = to_ti_qspi_slave(slave);
 240         uint words = bitlen >> 3; /* fixed 8-bit word length */
 241         const uchar *txp = dout;
 242         uchar *rxp = din;
 243         uint status;
 244         int timeout;
 245
 246 #ifdef CONFIG_DRA7XX
 247         int val;
 248 #endif
 249
 250         debug("spi_xfer: bus:%i cs:%i bitlen:%i words:%i flags:%lx\n",
 251               slave->bus, slave->cs, bitlen, words, flags);
 252
 253         /* Setup mmap flags */
 254         if (flags & SPI_XFER_MMAP) {
 255                 writel(MM_SWITCH, &qslave->base->memswitch);
 256 #ifdef CONFIG_DRA7XX
 257                 val = readl(CORE_CTRL_IO);
 258                 val |= MEM_CS;
 259                 writel(val, CORE_CTRL_IO);
 260 #endif
 261                 return 0;
 262         } else if (flags & SPI_XFER_MMAP_END) {
 263                 writel(~MM_SWITCH, &qslave->base->memswitch);
 264 #ifdef CONFIG_DRA7XX
 265                 val = readl(CORE_CTRL_IO);
 266                 val &= MEM_CS_UNSELECT;
 267                 writel(val, CORE_CTRL_IO);
 268 #endif
 269                 return 0;
 270         }
 271
 272         if (bitlen == 0)
 273                 return -1;
 274
 275         if (bitlen % 8) {
 276                 debug("spi_xfer: Non byte aligned SPI transfer\n");
 277                 return -1;
 278         }
 279
 280         /* Setup command reg */
 281         qslave->cmd = 0;
 282         qslave->cmd |= QSPI_WLEN(8);
 283         qslave->cmd |= QSPI_EN_CS(slave->cs);
 284         if (flags & SPI_3WIRE)
 285                 qslave->cmd |= QSPI_3_PIN;
 286         qslave->cmd |= 0xfff;
 287
 288 /* FIXME: This delay is required for successfull
 289  * completion of read/write/erase. Once its root
 290  * caused, it will be remove from the driver.
 291  */
 292 #ifdef CONFIG_AM43XX
 293         udelay(100);
 294 #endif
 295         while (words--) {
 296                 if (txp) {
 297                         debug("tx cmd %08x dc %08x data %02x\n",
 298                               qslave->cmd | QSPI_WR_SNGL, qslave->dc, *txp);
 299                         writel(*txp++, &qslave->base->data);
 300                         writel(qslave->cmd | QSPI_WR_SNGL,
 301                                &qslave->base->cmd);
 302                         status = readl(&qslave->base->status);
 303                         timeout = QSPI_TIMEOUT;
 304                         while ((status & QSPI_WC_BUSY) != QSPI_XFER_DONE) {
 305                                 if (--timeout < 0) {
 306                                         printf("spi_xfer: TX timeout!\n");
 307                                         return -1;
 308                                 }
 309                                 status = readl(&qslave->base->status);
 310                         }
 311                         debug("tx done, status %08x\n", status);
 312                 }
 313                 if (rxp) {
 314                         qslave->cmd |= QSPI_RD_SNGL;
 315                         debug("rx cmd %08x dc %08x\n",
 316                               qslave->cmd, qslave->dc);
 317                         writel(qslave->cmd, &qslave->base->cmd);
 318                         status = readl(&qslave->base->status);
 319                         timeout = QSPI_TIMEOUT;
 320                         while ((status & QSPI_WC_BUSY) != QSPI_XFER_DONE) {
 321                                 if (--timeout < 0) {
 322                                         printf("spi_xfer: RX timeout!\n");
 323                                         return -1;
 324                                 }
 325                                 status = readl(&qslave->base->status);
 326                         }
 327                         *rxp++ = readl(&qslave->base->data);
 328                         debug("rx done, status %08x, read %02x\n",
 329                               status, *(rxp-1));
 330                 }
 331         }
 332
 333         /* Terminate frame */
 334         if (flags & SPI_XFER_END)
 335                 spi_cs_deactivate(slave);
 336
 337         return 0;
 338 }