2 * Copyright (C) 2012 Samsung Electronics
3 * R. Chandrasekar <rcsekar@samsung.com>
5 * SPDX-License-Identifier: GPL-2.0+
16 #include <asm/arch/sound.h>
21 #define SOUND_400_HZ 400
22 #define SOUND_BITS_IN_BYTE 8
24 static struct i2stx_info g_i2stx_pri
;
27 * get_sound_i2s_values gets values for i2s parameters
29 * @param i2stx_info i2s transmitter transfer param structure
30 * @param blob FDT blob if enabled else NULL
32 static int get_sound_i2s_values(struct i2stx_info
*i2s
, const void *blob
)
38 node
= fdt_path_offset(blob
, "i2s");
40 debug("EXYNOS_SOUND: No node for sound in device tree\n");
45 * Get the pre-defined sound specific values from FDT.
46 * All of these are expected to be correct otherwise
47 * wrong register values in i2s setup parameters
48 * may result in no sound play.
50 base
= fdtdec_get_addr(blob
, node
, "reg");
51 if (base
== FDT_ADDR_T_NONE
) {
52 debug("%s: Missing i2s base\n", __func__
);
55 i2s
->base_address
= base
;
57 i2s
->audio_pll_clk
= fdtdec_get_int(blob
,
58 node
, "samsung,i2s-epll-clock-frequency", -1);
59 error
|= i2s
->audio_pll_clk
;
60 debug("audio_pll_clk = %d\n", i2s
->audio_pll_clk
);
61 i2s
->samplingrate
= fdtdec_get_int(blob
,
62 node
, "samsung,i2s-sampling-rate", -1);
63 error
|= i2s
->samplingrate
;
64 debug("samplingrate = %d\n", i2s
->samplingrate
);
65 i2s
->bitspersample
= fdtdec_get_int(blob
,
66 node
, "samsung,i2s-bits-per-sample", -1);
67 error
|= i2s
->bitspersample
;
68 debug("bitspersample = %d\n", i2s
->bitspersample
);
69 i2s
->channels
= fdtdec_get_int(blob
,
70 node
, "samsung,i2s-channels", -1);
71 error
|= i2s
->channels
;
72 debug("channels = %d\n", i2s
->channels
);
73 i2s
->rfs
= fdtdec_get_int(blob
,
74 node
, "samsung,i2s-lr-clk-framesize", -1);
76 debug("rfs = %d\n", i2s
->rfs
);
77 i2s
->bfs
= fdtdec_get_int(blob
,
78 node
, "samsung,i2s-bit-clk-framesize", -1);
80 debug("bfs = %d\n", i2s
->bfs
);
82 i2s
->id
= fdtdec_get_int(blob
, node
, "samsung,i2s-id", -1);
84 debug("id = %d\n", i2s
->id
);
87 debug("fail to get sound i2s node properties\n");
97 * @param blob FDT blob
98 * @param pi2s_tx i2s parameters required by codec
99 * @return int value, 0 for success
101 static int codec_init(const void *blob
, struct i2stx_info
*pi2s_tx
)
104 const char *codectype
;
107 /* Get the node from FDT for sound */
108 node
= fdt_path_offset(blob
, "i2s");
110 debug("EXYNOS_SOUND: No node for sound in device tree\n");
111 debug("node = %d\n", node
);
116 * Get the pre-defined sound codec specific values from FDT.
117 * All of these are expected to be correct otherwise sound
120 codectype
= fdt_getprop(blob
, node
, "samsung,codec-type", NULL
);
121 debug("device = %s\n", codectype
);
122 if (!strcmp(codectype
, "wm8994")) {
123 /* Check the codec type and initialise the same */
124 ret
= wm8994_init(blob
, pi2s_tx
->id
+ 1,
125 pi2s_tx
->samplingrate
,
126 (pi2s_tx
->samplingrate
* (pi2s_tx
->rfs
)),
127 pi2s_tx
->bitspersample
, pi2s_tx
->channels
);
128 } else if (!strcmp(codectype
, "max98095")) {
129 ret
= max98095_init(blob
, pi2s_tx
->id
+ 1,
130 pi2s_tx
->samplingrate
,
131 (pi2s_tx
->samplingrate
* (pi2s_tx
->rfs
)),
132 pi2s_tx
->bitspersample
);
134 debug("%s: Unknown codec type %s\n", __func__
, codectype
);
139 debug("%s: Codec init failed\n", __func__
);
146 int sound_init(const void *blob
)
149 struct i2stx_info
*pi2s_tx
= &g_i2stx_pri
;
151 /* Get the I2S Values */
152 if (get_sound_i2s_values(pi2s_tx
, blob
) < 0) {
153 debug(" FDT I2S values failed\n");
157 if (codec_init(blob
, pi2s_tx
) < 0) {
158 debug(" Codec init failed\n");
162 ret
= i2s_tx_init(pi2s_tx
);
164 debug("%s: Failed to init i2c transmit: ret=%d\n", __func__
,
173 int sound_play(uint32_t msec
, uint32_t frequency
)
176 unsigned long data_size
;
177 unsigned int ret
= 0;
179 /*Buffer length computation */
180 data_size
= g_i2stx_pri
.samplingrate
* g_i2stx_pri
.channels
;
181 data_size
*= (g_i2stx_pri
.bitspersample
/ SOUND_BITS_IN_BYTE
);
182 data
= malloc(data_size
);
185 debug("%s: malloc failed\n", __func__
);
189 sound_create_square_wave((unsigned short *)data
,
190 data_size
/ sizeof(unsigned short),
193 while (msec
>= 1000) {
194 ret
= i2s_transfer_tx_data(&g_i2stx_pri
, data
,
195 (data_size
/ sizeof(int)));
200 (data_size
* msec
) / (sizeof(int) * 1000);
202 ret
= i2s_transfer_tx_data(&g_i2stx_pri
, data
, size
);