usr/src/cmd/audio/utilities/device_ctl.c

   1 /*
   2  * CDDL HEADER START
   3  *
   4  * The contents of this file are subject to the terms of the
   5  * Common Development and Distribution License, Version 1.0 only
   6  * (the "License").  You may not use this file except in compliance
   7  * with the License.
   8  *
   9  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
  10  * or http://www.opensolaris.org/os/licensing.
  11  * See the License for the specific language governing permissions
  12  * and limitations under the License.
  13  *
  14  * When distributing Covered Code, include this CDDL HEADER in each
  15  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
  16  * If applicable, add the following below this CDDL HEADER, with the
  17  * fields enclosed by brackets "[]" replaced with your own identifying
  18  * information: Portions Copyright [yyyy] [name of copyright owner]
  19  *
  20  * CDDL HEADER END
  21  */
  22 /*
  23  * Copyright 1989-2003 Sun Microsystems, Inc.  All rights reserved.
  24  * Use is subject to license terms.
  25  */
  26
  27 #pragma ident   "%Z%%M% %I%     %E% SMI"
  28
  29 /*
  30  * This file contains routines to read and write the audio device state.
  31  */
  32
  33 #include <errno.h>
  34 #include <stropts.h>
  35 #include <sys/types.h>
  36 #include <sys/file.h>
  37 #include <sys/stat.h>
  38 #include <sys/ioctl.h>
  39
  40 #include <libaudio_impl.h>
  41 #include <audio_errno.h>
  42 #include <audio_hdr.h>
  43 #include <audio_device.h>
  44
  45
  46 /*
  47  * Get device information structure.
  48  */
  49 int
  50 audio_getinfo(int fd, Audio_info *ip)
  51 {
  52         if (ioctl(fd, AUDIO_GETINFO, (char *)ip) < 0) {
  53                 return (AUDIO_UNIXERROR);
  54         } else {
  55                 return (AUDIO_SUCCESS);
  56         }
  57 }
  58
  59 /*
  60  * Set device information structure.
  61  * The calling routine should use AUDIO_INITINFO prior to setting new values.
  62  */
  63 int
  64 audio_setinfo(int fd, Audio_info *ip)
  65 {
  66         if (ioctl(fd, AUDIO_SETINFO, (char *)ip) < 0) {
  67                 return (AUDIO_UNIXERROR);
  68         } else {
  69                 return (AUDIO_SUCCESS);
  70         }
  71 }
  72
  73 /*
  74  * Return an Audio_hdr corresponding to the encoding configuration
  75  * of the audio device on 'fd'.
  76  */
  77 int
  78 audio__setplayhdr(int fd, Audio_hdr *hdrp, unsigned int which)
  79 {
  80         Audio_hdr               thdr;
  81         Audio_info              info;
  82         struct audio_prinfo     *prinfo;
  83         int                     err;
  84
  85         if (which & AUDIO__PLAY)
  86                 prinfo = &info.play;
  87         else if (which & AUDIO__RECORD)
  88                 prinfo = &info.record;
  89         else
  90                 return (AUDIO_ERR_BADARG);
  91
  92         if (which & AUDIO__SET) {
  93                 thdr = *hdrp;                   /* save original hdr */
  94                 AUDIO_INITINFO(&info);
  95                 prinfo->sample_rate = hdrp->sample_rate;
  96                 prinfo->channels = hdrp->channels;
  97                 prinfo->encoding = hdrp->encoding;
  98                 prinfo->precision = hdrp->bytes_per_unit * 8;
  99                 err = audio_setinfo(fd, &info);
 100         } else {
 101                 err = audio_getinfo(fd, &info);
 102         }
 103
 104         /* Decode back into the header structure */
 105         /* since the I_SMSG is set, upon completion of updating         */
 106         /* the format, the driver sends the msg  so the                 */
 107         /* system call is interrupted.  For now, just ignore this       */
 108         if ((err == AUDIO_SUCCESS) || (errno == EINTR)) {
 109                 hdrp->sample_rate = prinfo->sample_rate;
 110                 hdrp->channels = prinfo->channels;
 111                 hdrp->data_size = AUDIO_UNKNOWN_SIZE;
 112                 hdrp->encoding = prinfo->encoding;
 113                 switch (hdrp->encoding) {
 114                 case AUDIO_ENCODING_ULAW:
 115                 case AUDIO_ENCODING_ALAW:
 116                 case AUDIO_ENCODING_LINEAR:
 117                 case AUDIO_ENCODING_LINEAR8:
 118                 case AUDIO_ENCODING_FLOAT:
 119                         hdrp->bytes_per_unit = prinfo->precision / 8;
 120                         hdrp->samples_per_unit = 1;
 121                         break;
 122                 default:
 123                         return (AUDIO_ERR_ENCODING);
 124                 }
 125                 if (which & AUDIO__SET) {
 126                         /* Check to see if *all* changes took effect */
 127                         if (audio_cmp_hdr(hdrp, &thdr) != 0)
 128                                 return (AUDIO_ERR_NOEFFECT);
 129                 }
 130         }
 131         return (err);
 132 }
 133
 134
 135 /*
 136  * Attempt to configure the audio device to match a particular encoding.
 137  */
 138
 139 /*
 140  * Set and/or set individual state values.
 141  * This routine is generally invoked by using the audio_set_*()
 142  * and audio_get_*() macros.
 143  * The 'valp' argument is always a pointer to an unsigned int.
 144  * Conversions to/from (unsigned char) flags are taken care of.
 145  */
 146 int
 147 audio__setval(int fd, unsigned int *valp, unsigned int which)
 148 {
 149         Audio_info              info;
 150         struct audio_prinfo     *prinfo;
 151         int                     err;
 152         unsigned                *up;
 153         unsigned char           *cp;
 154
 155         /* Set a pointer to the value of interest */
 156         if (which & AUDIO__PLAY)
 157                 prinfo = &info.play;
 158         else if (which & AUDIO__RECORD)
 159                 prinfo = &info.record;
 160         else if ((which & AUDIO__SETVAL_MASK) != AUDIO__MONGAIN)
 161                 return (AUDIO_ERR_BADARG);
 162
 163         up = NULL;
 164         switch (which & AUDIO__SETVAL_MASK) {
 165         case AUDIO__PORT:
 166                 up = &prinfo->port; break;
 167         case AUDIO__SAMPLES:
 168                 up = &prinfo->samples; break;
 169         case AUDIO__ERROR:
 170                 cp = &prinfo->error; break;
 171         case AUDIO__EOF:
 172                 up = &prinfo->eof; break;
 173         case AUDIO__OPEN:
 174                 cp = &prinfo->open; break;
 175         case AUDIO__ACTIVE:
 176                 cp = &prinfo->active; break;
 177         case AUDIO__WAITING:
 178                 cp = &prinfo->waiting; break;
 179         case AUDIO__GAIN:
 180                 up = &prinfo->gain; break;
 181         case AUDIO__MONGAIN:
 182                 up = &info.monitor_gain; break;
 183         case AUDIO__BALANCE:
 184                 cp = &prinfo->balance; break;
 185         default:
 186                 return (AUDIO_ERR_BADARG);
 187         }
 188
 189         if (which & AUDIO__SET) {
 190                 /* Init so that only the value of interest is changed */
 191                 AUDIO_INITINFO(&info);
 192                 if (up != NULL) {
 193                         *up = *valp;
 194                 } else {
 195                         *cp = (unsigned char) *valp;
 196                 }
 197                 err = audio_setinfo(fd, &info);
 198         } else {
 199                 err = audio_getinfo(fd, &info);
 200         }
 201         if (err == AUDIO_SUCCESS) {
 202                 if (up != NULL)
 203                         *valp = *up;
 204                 else
 205                         *valp = (unsigned)*cp;
 206         }
 207         return (err);
 208 }
 209
 210 /*
 211  * Get/set gain value.
 212  * NOTE: legal values are floating-point double 0. - 1.
 213  */
 214 int
 215 audio__setgain(int fd, double *valp, unsigned int which)
 216 {
 217         int             err;
 218         unsigned        x;
 219
 220         if (which & AUDIO__SET) {
 221                 if ((*valp < 0.) || (*valp > 1.))
 222                         return (AUDIO_ERR_BADARG);
 223
 224                 /* Map value into legal range */
 225                 x = ((unsigned)(*valp * (AUDIO_MAX_GAIN - AUDIO_MIN_GAIN))) +
 226                     AUDIO_MIN_GAIN;
 227         }
 228
 229         /* Get or set the new value */
 230         err = audio__setval(fd, &x, which);
 231         if (err == AUDIO_SUCCESS) {
 232                 /* Map value back to double */
 233                 *valp = ((double)(x - AUDIO_MIN_GAIN) /
 234                     (AUDIO_MAX_GAIN - AUDIO_MIN_GAIN));
 235         }
 236         return (err);
 237 }
 238
 239 /*
 240  * Set Pause/resume flags.
 241  * Can set play and record individually or together.
 242  */
 243 int
 244 audio__setpause(int fd, unsigned int which)
 245 {
 246         Audio_info      info;
 247         int             err;
 248         unsigned char   x;
 249
 250         AUDIO_INITINFO(&info);
 251
 252         if ((which & AUDIO__SETVAL_MASK) == AUDIO__PAUSE) {
 253                 x = TRUE;
 254         } else if ((which & AUDIO__SETVAL_MASK) == AUDIO__RESUME) {
 255                 x = FALSE;
 256         } else {
 257                 return (AUDIO_ERR_BADARG);
 258         }
 259
 260         if (which & AUDIO__PLAY) {
 261                 info.play.pause = x;
 262         }
 263         if (which & AUDIO__RECORD) {
 264                 info.record.pause = x;
 265         }
 266
 267         /* Set the new value */
 268         err = audio_setinfo(fd, &info);
 269
 270         /* Check to see if this took effect */
 271         if (err == AUDIO_SUCCESS) {
 272                 if (((which & AUDIO__PLAY) && (info.play.pause != x)) ||
 273                     ((which & AUDIO__RECORD) && (info.record.pause != x)))
 274                         return (AUDIO_ERR_NOEFFECT);
 275         }
 276         return (err);
 277 }
 278
 279
 280 /*
 281  * Flush play and/or record buffers.
 282  */
 283 int
 284 audio__flush(int fd, unsigned int which)
 285 {
 286         int             flag;
 287
 288         flag = (which & AUDIO__PLAY) ? FLUSHW : 0;
 289         flag |= (which & AUDIO__RECORD) ? FLUSHR : 0;
 290
 291         return ((ioctl(fd, I_FLUSH, flag) < 0) ?
 292             AUDIO_UNIXERROR : AUDIO_SUCCESS);
 293 }
 294
 295
 296 /*
 297  * Wait synchronously for output buffers to finish playing.
 298  * If 'sig' is TRUE, signals may interrupt the drain.
 299  */
 300 int
 301 audio_drain(int fd, int sig)
 302 {
 303         while (ioctl(fd, AUDIO_DRAIN, 0) < 0) {
 304                 if (errno != EINTR) {
 305                         return (AUDIO_UNIXERROR);
 306                 }
 307
 308                 if (sig) {
 309                         return (AUDIO_ERR_INTERRUPTED);
 310                 }
 311         }
 312         return (AUDIO_SUCCESS);
 313 }
 314
 315 /*
 316  * Write an EOF marker to the output audio stream.
 317  */
 318 int
 319 audio_play_eof(int fd)
 320 {
 321         return (write(fd, (char *)NULL, 0) < 0 ?
 322             AUDIO_UNIXERROR : AUDIO_SUCCESS);
 323 }