8322 nl: misleading-indentation

[unleashed/tickless.git] / usr / src / cmd / cmd-inet / usr.lib / bridged / events.c

/*
 * CDDL HEADER START
 *
 * The contents of this file are subject to the terms of the
 * Common Development and Distribution License (the "License").
 * You may not use this file except in compliance with the License.
 *
 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
 * or http://www.opensolaris.org/os/licensing.
 * See the License for the specific language governing permissions
 * and limitations under the License.
 *
 * When distributing Covered Code, include this CDDL HEADER in each
 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
 * If applicable, add the following below this CDDL HEADER, with the
 * fields enclosed by brackets "[]" replaced with your own identifying
 * information: Portions Copyright [yyyy] [name of copyright owner]
 *
 * CDDL HEADER END
 */

/*
 * Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved.
 */

/*
 * bridged - bridging control daemon.  This module handles events and general
 * port-related operations.
 */

#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <fcntl.h>
#include <string.h>
#include <sys/types.h>
#include <syslog.h>
#include <libdlpi.h>
#include <libdladm.h>
#include <libdllink.h>
#include <libdlbridge.h>
#include <libdlvlan.h>
#include <libdlstat.h>
#include <stp_in.h>
#include <stp_vectors.h>
#include <net/if_types.h>
#include <net/bridge.h>
#include <sys/ethernet.h>

#include "global.h"

int refresh_count = 1;  /* never zero */
dladm_bridge_prot_t protect = DLADM_BRIDGE_PROT_STP;

/*
 * The 'allports' array is an array of pointers to the struct portdata
 * structures.  We reallocate 'allports' as needed, but the portdata must
 * remain where it's initially allocated, because libdlpi's notification
 * mechanism has a copy of a pointer to this structure.
 */
uint_t nextport;
struct portdata **allports;

/* Port allocation increment (arbitrary) */
#define ALLOCINCR       10
static uint_t numports;

static datalink_id_t main_linkid;

int control_fd;

static void
linkdown(void)
{
        (void) dladm_destroy_datalink_id(dlhandle, main_linkid,
            DLADM_OPT_ACTIVE);
}

void
open_bridge_control(void)
{
        bridge_newbridge_t bnb;
        dladm_status_t status;
        char buf[DLADM_STRSIZE];

        if ((control_fd = open(BRIDGE_CTLPATH, O_RDWR | O_NONBLOCK)) == -1) {
                perror(BRIDGE_CTLPATH);
                exit(EXIT_FAILURE);
        }
        (void) snprintf(bnb.bnb_name, sizeof (bnb.bnb_name), "%s0",
            instance_name);
        status = dladm_name2info(dlhandle, bnb.bnb_name, &bnb.bnb_linkid, NULL,
            NULL, NULL);
        if (status != DLADM_STATUS_OK) {
                (void) fprintf(stderr, "bridged: %s: %s\n", bnb.bnb_name,
                    dladm_status2str(status, buf));
                exit(EXIT_FAILURE);
        }
        if (strioctl(control_fd, BRIOC_NEWBRIDGE, &bnb, sizeof (bnb)) == -1) {
                perror("NEWBRIDGE");
                exit(EXIT_FAILURE);
        }
        main_linkid = bnb.bnb_linkid;
        if (strioctl(control_fd, BRIOC_TABLEMAX, &tablemax,
            sizeof (tablemax)) == -1) {
                syslog(LOG_ERR, "cannot set table max %lu on bridge %s: %m",
                    tablemax, instance_name);
                exit(EXIT_FAILURE);
        }
        /*
         * This covers for any previous incarnation where we might have crashed
         * or been SIGKILL'd and failed to take down the datalink.
         */
        linkdown();
        (void) atexit(linkdown);
        status = dladm_up_datalink_id(dlhandle, bnb.bnb_linkid);
        if (status != DLADM_STATUS_OK) {
                (void) fprintf(stderr, "bridged: %s link up: %s\n",
                    bnb.bnb_name, dladm_status2str(status, buf));
                exit(EXIT_FAILURE);
        }
}

struct portdata *
find_by_linkid(datalink_id_t linkid)
{
        int i;
        struct portdata *port;

        for (i = 0; i < nextport; i++) {
                port = allports[i];
                if (port->linkid == linkid)
                        return (port);
        }
        return (NULL);
}

/*ARGSUSED2*/
static int
set_vlan(dladm_handle_t handle, datalink_id_t linkid, void *arg)
{
        struct portdata *port;
        dladm_status_t status;
        dladm_vlan_attr_t vinfo;
        char pointless[DLADM_STRSIZE];
        bridge_vlanenab_t bve;

        status = dladm_vlan_info(handle, linkid, &vinfo, DLADM_OPT_ACTIVE);
        if (status != DLADM_STATUS_OK) {
                syslog(LOG_DEBUG, "can't get VLAN info on link ID %u: %s",
                    linkid, dladm_status2str(status, pointless));
                return (DLADM_WALK_CONTINUE);
        }

        port = find_by_linkid(vinfo.dv_linkid);
        if (port == NULL || !port->kern_added)
                return (DLADM_WALK_CONTINUE);

        bve.bve_linkid = port->linkid;
        bve.bve_vlan = vinfo.dv_vid;
        bve.bve_onoff = B_TRUE;
        if (strioctl(control_fd, BRIOC_VLANENAB, &bve, sizeof (bve)) == -1) {
                syslog(LOG_ERR, "unable to enable VLAN %d on linkid %u: %m",
                    vinfo.dv_vid, port->linkid);
                return (DLADM_WALK_TERMINATE);
        } else {
                return (DLADM_WALK_CONTINUE);
        }
}

/*
 * If the named port already exists, then update its configuration.  If it
 * doesn't, then create and enable it.
 */
static void
update_port(int vlan_id, const char *portname, datalink_id_t linkid,
    datalink_class_t class)
{
        int posn;
        struct portdata *port;
        struct pollfd *fds;
        int port_index;
        struct {
                datalink_id_t linkid;
                char linkname[MAXLINKNAMELEN];
        } adddata;
        bridge_setpvid_t bsv;
        uint_t propval, valcnt;
        dladm_status_t status;

        for (posn = 0; posn < nextport; posn++) {
                if (allports[posn]->linkid == linkid)
                        break;
        }

        /* If we need to allocate more array space, then do so in chunks. */
        if (posn >= numports) {
                struct portdata **newarr;

                newarr = realloc(allports,
                    sizeof (*newarr) * (nextport + ALLOCINCR));
                if (newarr != NULL)
                        allports = newarr;
                fds = realloc(fdarray,
                    sizeof (*fds) * (nextport + ALLOCINCR + FDOFFSET));
                if (fds != NULL)
                        fdarray = fds;
                if (newarr == NULL || fds == NULL) {
                        syslog(LOG_ERR, "unable to add %s; no memory",
                            portname);
                        return;
                }
                numports = nextport + ALLOCINCR;
        }

        port_index = posn + 1;
        fds = fdarray + posn + FDOFFSET;

        /* If our linkid search ran to the end, then this is a new port. */
        if (posn == nextport) {
                if ((port = calloc(1, sizeof (*port))) == NULL) {
                        syslog(LOG_ERR, "unable to add %s; no memory",
                            portname);
                        return;
                }
                allports[posn] = port;
                port->vlan_id = vlan_id;
                port->linkid = linkid;
                port->port_index = port_index;
                port->phys_status = B_TRUE;
                port->admin_status = B_TRUE;
                port->state = BLS_BLOCKLISTEN;
                nextport++;
        } else {
                /* Located port by linkid; we're just updating existing data */
                port = allports[posn];

                /*
                 * If it changed name, then close and reopen so we log under
                 * the most current name for this port.
                 */
                if (port->name != NULL && strcmp(portname, port->name) != 0) {
                        if (port->dlpi != NULL)
                                dlpi_close(port->dlpi);
                        port->dlpi = NULL;
                        port->name = NULL;
                        fds->fd = -1;
                        fds->events = 0;
                }
        }

        /*
         * If the port is not yet attached to the bridge in the kernel, then do
         * that now.
         */
        if (!port->kern_added) {
                adddata.linkid = linkid;
                (void) strlcpy(adddata.linkname, portname,
                    sizeof (adddata.linkname));
                if (strioctl(control_fd, BRIOC_ADDLINK, &adddata,
                    sizeof (adddata.linkid) + strlen(adddata.linkname)) == -1) {
                        syslog(LOG_ERR, "cannot bridge %s: %m", portname);
                        goto failure;
                }
                port->kern_added = B_TRUE;
        }

        port->referenced = B_TRUE;

        valcnt = 1;
        status = dladm_get_linkprop_values(dlhandle, linkid,
            DLADM_PROP_VAL_PERSISTENT, "forward", &propval, &valcnt);
        if (status == DLADM_STATUS_OK)
                port->admin_status = propval;

        bsv.bsv_vlan = 1;
        status = dladm_get_linkprop_values(dlhandle, linkid,
            DLADM_PROP_VAL_PERSISTENT, "default_tag", &propval, &valcnt);
        if (status == DLADM_STATUS_OK)
                bsv.bsv_vlan = propval;

        bsv.bsv_linkid = linkid;
        if (strioctl(control_fd, BRIOC_SETPVID, &bsv, sizeof (bsv)) == -1) {
                syslog(LOG_ERR, "can't set PVID on %s: %m", portname);
                goto failure;
        }

        if (port->dlpi == NULL) {
                if (!port_dlpi_open(portname, port, class))
                        goto failure;
                fds->fd = dlpi_fd(port->dlpi);
                fds->events = POLLIN;
        }

        if (rstp_add_port(port))
                return;

failure:
        if (port->dlpi != NULL) {
                dlpi_close(port->dlpi);
                port->dlpi = NULL;
                port->name = NULL;
                fds->fd = -1;
                fds->events = 0;
        }
        if (port->kern_added) {
                if (strioctl(control_fd, BRIOC_REMLINK, &port->linkid,
                    sizeof (port->linkid)) == -1)
                        syslog(LOG_ERR, "cannot remove from bridge %s: %m",
                            portname);
                else
                        port->kern_added = B_FALSE;
        }
        if (posn + 1 == nextport) {
                free(port);
                nextport--;
        }
}

/*ARGSUSED2*/
static int
update_link(dladm_handle_t handle, datalink_id_t linkid, void *arg)
{
        dladm_status_t status;
        char bridge[MAXLINKNAMELEN], linkname[MAXLINKNAMELEN];
        char pointless[DLADM_STRSIZE];
        datalink_class_t class;

        status = dladm_bridge_getlink(handle, linkid, bridge, sizeof (bridge));
        if (status == DLADM_STATUS_OK && strcmp(bridge, instance_name) == 0) {
                status = dladm_datalink_id2info(handle, linkid, NULL, &class,
                    NULL, linkname, sizeof (linkname));
                if (status == DLADM_STATUS_OK) {
                        update_port(0, linkname, linkid, class);
                } else {
                        syslog(LOG_ERR, "unable to get link info for ID %u: %s",
                            linkid, dladm_status2str(status, pointless));
                }
        } else if (debugging) {
                if (status != DLADM_STATUS_OK)
                        syslog(LOG_DEBUG,
                            "unable to get bridge data for ID %u: %s",
                            linkid, dladm_status2str(status, pointless));
                else
                        syslog(LOG_DEBUG, "link ID %u is on bridge %s, not %s",
                            linkid, bridge, instance_name);
        }
        return (DLADM_WALK_CONTINUE);
}

/*
 * Refresh action - reread configuration properties.
 */
static void
handle_refresh(int sigfd)
{
        int i;
        struct portdata *pdp;
        struct pollfd *fdp;
        char buf[16];
        dladm_status_t status;
        boolean_t new_debug;
        uint32_t new_tablemax;

        /* Drain signal events from pipe */
        if (sigfd != -1)
                (void) read(sigfd, buf, sizeof (buf));

        status = dladm_bridge_get_privprop(instance_name, &new_debug,
            &new_tablemax);
        if (status == DLADM_STATUS_OK) {
                if (debugging && !new_debug)
                        syslog(LOG_DEBUG, "disabling debugging");
                debugging = new_debug;
                if (new_tablemax != tablemax) {
                        syslog(LOG_DEBUG, "changed tablemax from %lu to %lu",
                            tablemax, new_tablemax);
                        if (strioctl(control_fd, BRIOC_TABLEMAX, &new_tablemax,
                            sizeof (tablemax)) == -1)
                                syslog(LOG_ERR, "cannot set table max "
                                    "%lu on bridge %s: %m", tablemax,
                                    instance_name);
                        else
                                tablemax = new_tablemax;
                }
        } else {
                syslog(LOG_ERR, "%s: unable to refresh bridge properties: %s",
                    instance_name, dladm_status2str(status, buf));
        }

        rstp_refresh();

        for (i = 0; i < nextport; i++)
                allports[i]->referenced = B_FALSE;

        /*
         * libdladm doesn't guarantee anything about link ordering in a walk,
         * so we do this walk twice: once to pick up the ports, and a second
         * time to get the enabled VLANs on all ports.
         */
        (void) dladm_walk_datalink_id(update_link, dlhandle, NULL,
            DATALINK_CLASS_ALL, DATALINK_ANY_MEDIATYPE, DLADM_OPT_ACTIVE);

        (void) dladm_walk_datalink_id(set_vlan, dlhandle, NULL,
            DATALINK_CLASS_VLAN, DATALINK_ANY_MEDIATYPE, DLADM_OPT_ACTIVE);

        /*
         * If any ports now show up as unreferenced, then they've been removed
         * from the configuration.
         */
        for (i = 0; i < nextport; i++) {
                pdp = allports[i];
                fdp = fdarray + i + FDOFFSET;
                if (!pdp->referenced) {
                        if (pdp->stp_added) {
                                (void) STP_IN_port_remove(pdp->vlan_id,
                                    pdp->port_index);
                                pdp->stp_added = B_FALSE;
                        }
                        if (pdp->dlpi != NULL) {
                                dlpi_close(pdp->dlpi);
                                pdp->dlpi = NULL;
                                pdp->name = NULL;
                                fdp->fd = -1;
                                fdp->events = 0;
                        }
                        if (pdp->kern_added) {
                                if (strioctl(control_fd, BRIOC_REMLINK,
                                    &pdp->linkid, sizeof (pdp->linkid)) == -1)
                                        syslog(LOG_ERR, "cannot remove linkid "
                                            "%u from bridge %s: %m",
                                            pdp->linkid, instance_name);
                                pdp->kern_added = B_FALSE;
                        }
                }
        }

        if (++refresh_count == 0)
                refresh_count = 1;
}

/*
 * Handle messages on the common control stream.  This currently just deals
 * with port SDU mismatches.
 */
static void
handle_control(void)
{
        bridge_ctl_t bc;
        ssize_t retv;
        struct portdata *port;
        int rc;

        retv = read(control_fd, &bc, sizeof (bc));
        if (retv != sizeof (bc))
                return;
        if ((port = find_by_linkid(bc.bc_linkid)) == NULL)
                return;
        if (port->sdu_failed == bc.bc_failed)
                return;
        port->sdu_failed = bc.bc_failed;
        if (!port->phys_status || !port->admin_status ||
            protect != DLADM_BRIDGE_PROT_STP)
                return;
        if (port->admin_non_stp) {
                bridge_setstate_t bss;

                bss.bss_linkid = port->linkid;
                bss.bss_state = !port->sdu_failed && !port->bpdu_protect ?
                    BLS_FORWARDING : BLS_BLOCKLISTEN;
                if (strioctl(control_fd, BRIOC_SETSTATE, &bss,
                    sizeof (bss)) == -1) {
                        syslog(LOG_ERR, "cannot set STP state on %s: %m",
                            port->name);
                }
        }
        if ((rc = STP_IN_enable_port(port->port_index, !bc.bc_failed)) != 0)
                syslog(LOG_ERR, "STP can't %s port %s for SDU failure: %s",
                    port->name, bc.bc_failed ? "disable" : "enable",
                    STP_IN_get_error_explanation(rc));
}

static void
receive_packet(struct portdata *port)
{
        int rc;
        size_t buflen;
        uint16_t buffer[ETHERMAX / sizeof (uint16_t)];
        struct ether_header *eh;
        char sender[ETHERADDRL * 3];

        buflen = sizeof (buffer);
        rc = dlpi_recv(port->dlpi, NULL, NULL, buffer, &buflen, 1, NULL);
        if (rc != DLPI_SUCCESS) {
                if (rc != DLPI_ETIMEDOUT)
                        syslog(LOG_ERR, "receive failure on %s: %s", port->name,
                            dlpi_strerror(rc));
                return;
        }

        /*
         * If we're administratively disabled, then don't deliver packets to
         * the STP state machine.  It will re-enable the port because it uses
         * the same variable for both link status and administrative state.
         */
        if (!port->admin_status || protect != DLADM_BRIDGE_PROT_STP) {
                if (debugging)
                        syslog(LOG_DEBUG,
                            "discard BPDU on non-forwarding interface %s",
                            port->name);
                return;
        }

        /*
         * There's a mismatch between the librstp and libdlpi expectations on
         * receive.  librstp wants the packet to start with the 802 length
         * field, not the destination address.
         */
        eh = (struct ether_header *)buffer;
        rc = STP_IN_check_bpdu_header((BPDU_T *)&eh->ether_type, buflen);

        /*
         * Note that we attempt to avoid calling the relatively expensive
         * _link_ntoa function unless we're going to use the result.  In normal
         * usage, we don't need this string.
         */
        if (rc == 0) {
                if (port->admin_non_stp && !port->bpdu_protect) {
                        bridge_setstate_t bss;

                        (void) _link_ntoa(eh->ether_shost.ether_addr_octet,
                            sender, ETHERADDRL, IFT_OTHER);
                        syslog(LOG_WARNING, "unexpected BPDU on %s from %s; "
                            "forwarding disabled", port->name, sender);
                        port->bpdu_protect = B_TRUE;
                        bss.bss_linkid = port->linkid;
                        bss.bss_state = BLS_BLOCKLISTEN;
                        if (strioctl(control_fd, BRIOC_SETSTATE, &bss,
                            sizeof (bss)) == -1) {
                                syslog(LOG_ERR, "cannot set STP state on "
                                    "%s: %m", port->name);
                        }
                        return;
                }
                if (debugging) {
                        (void) _link_ntoa(eh->ether_shost.ether_addr_octet,
                            sender, ETHERADDRL, IFT_OTHER);
                        syslog(LOG_DEBUG, "got BPDU from %s on %s; %d bytes",
                            sender, port->name, buflen);
                }
                rc = STP_IN_rx_bpdu(port->vlan_id, port->port_index,
                    (BPDU_T *)&eh->ether_type, buflen);
        }
        if (rc != 0) {
                (void) _link_ntoa(eh->ether_shost.ether_addr_octet, sender,
                    ETHERADDRL, IFT_OTHER);
                syslog(LOG_DEBUG,
                    "discarded malformed packet on %s from %s: %s",
                    port->name, sender, STP_IN_get_error_explanation(rc));
        }
}

void
get_dladm_speed(struct portdata *port)
{
        dladm_status_t status;
        uint64_t ifspeed;

        status = dladm_get_single_mac_stat(dlhandle, port->linkid, "ifspeed",
            KSTAT_DATA_UINT64, &ifspeed);
        if (status == DLADM_STATUS_OK && ifspeed != 0)
                port->speed = ifspeed / 1000000;
        else
                port->speed = 10UL;
}

void
enable_forwarding(struct portdata *port)
{
        bridge_setstate_t bss;

        bss.bss_linkid = port->linkid;
        bss.bss_state = BLS_FORWARDING;
        if (strioctl(control_fd, BRIOC_SETSTATE, &bss, sizeof (bss)) == -1)
                syslog(LOG_ERR, "cannot set STP state on %s: %m", port->name);
}

void
event_loop(void)
{
        int i;
        hrtime_t last_time, now;
        int tout;

        if (lock_engine() != 0) {
                syslog(LOG_ERR, "mutex lock");
                exit(EXIT_FAILURE);
        }

        /* Bootstrap configuration */
        handle_refresh(-1);

        last_time = gethrtime();
        while (!shutting_down) {
                now = gethrtime();
                if (now - last_time >= 1000000000ll) {
                        (void) STP_IN_one_second();
                        tout = 1000;
                        last_time = now;
                } else {
                        tout = 1000 - (now - last_time) / 1000000ll;
                }
                unlock_engine();
                (void) poll(fdarray, nextport + FDOFFSET, tout);
                if (lock_engine() != 0) {
                        syslog(LOG_ERR, "mutex lock");
                        exit(EXIT_FAILURE);
                }
                if (fdarray[0].revents & POLLIN)
                        handle_refresh(fdarray[0].fd);
                if (fdarray[1].revents & POLLIN)
                        handle_control();
                for (i = 0; i < nextport; i++) {
                        if (fdarray[i + FDOFFSET].revents & POLLIN)
                                receive_packet(allports[i]);
                }
        }
        unlock_engine();
}