usr/src/cmd/cmd-inet/usr.sbin/in.routed/svc-route

   1 #!/sbin/sh
   2 #
   3 # CDDL HEADER START
   4 #
   5 # The contents of this file are subject to the terms of the
   6 # Common Development and Distribution License (the "License").
   7 # You may not use this file except in compliance with the License.
   8 #
   9 # You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
  10 # or http://www.opensolaris.org/os/licensing.
  11 # See the License for the specific language governing permissions
  12 # and limitations under the License.
  13 #
  14 # When distributing Covered Code, include this CDDL HEADER in each
  15 # file and include the License file at usr/src/OPENSOLARIS.LICENSE.
  16 # If applicable, add the following below this CDDL HEADER, with the
  17 # fields enclosed by brackets "[]" replaced with your own identifying
  18 # information: Portions Copyright [yyyy] [name of copyright owner]
  19 #
  20 # CDDL HEADER END
  21 #
  22 #
  23 # Copyright 2009 Sun Microsystems, Inc.  All rights reserved.
  24 # Use is subject to license terms.
  25 #
  26 # Copyright 2016 Hans Rosenfeld <rosenfeld@grumpf.hope-2000.org>
  27 #
  28
  29 . /lib/svc/share/smf_include.sh
  30 . /lib/svc/share/routing_include.sh
  31 . /lib/svc/share/ipf_include.sh
  32
  33 smf_configure_ip || exit $SMF_EXIT_OK
  34
  35 create_ipf_rules()
  36 {
  37         FMRI=$1
  38         file=`fmri_to_file ${FMRI} $IPF_SUFFIX`
  39
  40         #
  41         # route:default is enabled iff route discovery is required. Allow
  42         # incoming icmp from routers for successful discovery.
  43         echo "# $FMRI" >$file
  44         gen_IRDP_rules $file
  45
  46         #
  47         # A potential router so apply policy to RIP, 520 udp
  48         #
  49         policy=`get_policy $FMRI`
  50         iana_name=`svcprop -p $FW_CONTEXT_PG/name ${FMRI} 2>/dev/null`
  51
  52         tport=`$SERVINFO -p -t -s $iana_name 2>/dev/null`
  53         uport=`$SERVINFO -p -u -s $iana_name 2>/dev/null`
  54
  55         if [ -n "$tport" ]; then
  56                 generate_rules $FMRI $policy "tcp" $tport $file
  57         fi
  58
  59         if [ -n "$uport" ]; then
  60                 generate_rules $FMRI $policy "udp" $uport $file
  61         fi
  62 }
  63
  64 if [ -n "$1" -a "$1" = "ipfilter" ]; then
  65         create_ipf_rules $2
  66         exit "$SMF_EXIT_OK"
  67 fi
  68
  69 daemon_args=`get_daemon_args $SMF_FMRI`
  70 options="AdghmnqsStvVzT:F:P:"
  71
  72 #
  73 # Handle upgrade - routing/daemon-args property must be mapped to properties
  74 # in routeadm property group.  Note that the SMF-incompatible -t option is not
  75 # supported, since it requires that in.routed run in the foreground.
  76 #
  77 if [ -n "$daemon_args" ]; then
  78         set_daemon_boolean_property "$SMF_FMRI" "$daemon_args" \
  79             "$options" "A" ignore_auth false true
  80         set_daemon_ordered_multivalue_property "$SMF_FMRI" "$daemon_args" \
  81             "$options" "F" minimize_routes
  82         set_daemon_boolean_property "$SMF_FMRI" "$daemon_args" \
  83             "$options" "g" offer_default_route true false
  84         set_daemon_boolean_property "$SMF_FMRI" "$daemon_args" \
  85             "$options" "h" advertise_host_routes false true
  86         set_daemon_boolean_property "$SMF_FMRI" "$daemon_args" \
  87             "$options" "m" advertise_host_routes_primary true false
  88         set_daemon_boolean_property "$SMF_FMRI" "$daemon_args" \
  89             "$options" "n" install_routes false true
  90         set_daemon_ordered_multivalue_property "$SMF_FMRI" "$daemon_args" \
  91             "$options" "P" parameters
  92         set_daemon_boolean_property "$SMF_FMRI" "$daemon_args" \
  93             "$options" "q" quiet_mode true false
  94         set_daemon_boolean_property "$SMF_FMRI" "$daemon_args" \
  95             "$options" "s" supply_routes true false
  96         set_daemon_boolean_property "$SMF_FMRI" "$daemon_args" \
  97             "$options" "S" default_routes_only true false
  98         set_daemon_value_property "$SMF_FMRI" "$daemon_args" \
  99             "$options" "T" log_file
 100         set_daemon_boolean_property "$SMF_FMRI" "$daemon_args" \
 101             "$options" "v" debug true false
 102         set_daemon_boolean_property "$SMF_FMRI" "$daemon_args" \
 103             "$options" "z" debug true
 104         clear_daemon_args $SMF_FMRI
 105 fi
 106
 107 #
 108 # Assemble arguments to daemon from properties
 109 #
 110 args="`get_daemon_option_from_boolean_property $SMF_FMRI ignore_auth \
 111         A false`"
 112 args="$args`get_daemon_option_from_boolean_property $SMF_FMRI \
 113         offer_default_route g true`"
 114 args="$args`get_daemon_option_from_boolean_property $SMF_FMRI \
 115         advertise_host_routes h false`"
 116 args="$args`get_daemon_option_from_boolean_property $SMF_FMRI \
 117         advertise_host_routes_primary m true`"
 118 args="$args`get_daemon_option_from_boolean_property $SMF_FMRI \
 119         install_routes n false`"
 120 args="$args`get_daemon_option_from_boolean_property $SMF_FMRI \
 121         quiet_mode q true`"
 122 args="$args`get_daemon_option_from_boolean_property $SMF_FMRI \
 123                 supply_routes s true`"
 124 args="$args`get_daemon_option_from_boolean_property $SMF_FMRI \
 125         default_routes_only S true`"
 126 args="$args`get_daemon_option_from_boolean_property $SMF_FMRI \
 127         debug z true`"
 128 if [ -n "$args" ]; then
 129         args="-${args}"
 130 fi
 131 args="$args `get_daemon_ordered_multivalue_option_from_property $SMF_FMRI \
 132         minimize_routes F`"
 133 args="$args `get_daemon_ordered_multivalue_option_from_property \
 134         $SMF_FMRI parameters P`"
 135 args="$args `get_daemon_option_from_property $SMF_FMRI \
 136         log_file T`"
 137
 138 /usr/sbin/in.routed $args
 139
 140 [ "$?" = 0 ] || exit $SMF_EXIT_ERR_FATAL
 141
 142 exit "$SMF_EXIT_OK"