8322 nl: misleading-indentation

[unleashed/tickless.git] / usr / src / cmd / mdb / common / kmdb / kmdb_promif.c

/*
 * CDDL HEADER START
 *
 * The contents of this file are subject to the terms of the
 * Common Development and Distribution License (the "License").
 * You may not use this file except in compliance with the License.
 *
 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
 * or http://www.opensolaris.org/os/licensing.
 * See the License for the specific language governing permissions
 * and limitations under the License.
 *
 * When distributing Covered Code, include this CDDL HEADER in each
 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
 * If applicable, add the following below this CDDL HEADER, with the
 * fields enclosed by brackets "[]" replaced with your own identifying
 * information: Portions Copyright [yyyy] [name of copyright owner]
 *
 * CDDL HEADER END
 */

/*
 * Copyright 2009 Sun Microsystems, Inc.  All rights reserved.
 * Use is subject to license terms.
 */

#include <sys/types.h>
#include <sys/termios.h>
#include <sys/promif.h>
#ifdef sun4v
#include <sys/promif_impl.h>
#endif
#include <unistd.h>
#include <string.h>
#include <stdlib.h>

#include <kmdb/kmdb_promif_impl.h>
#include <kmdb/kmdb_kdi.h>
#include <kmdb/kmdb_dpi.h>
#include <mdb/mdb_debug.h>
#include <mdb/mdb_err.h>
#include <mdb/mdb_frame.h>
#include <mdb/mdb_string.h>
#include <mdb/mdb.h>

#define KMDB_PROM_DEF_CONS_MODE "9600,n,1,-,-"

#define KMDB_PROM_READBUF_SIZE  1024

static char kmdb_prom_readbuf[KMDB_PROM_READBUF_SIZE];
static int kmdb_prom_readbuf_head;
static int kmdb_prom_readbuf_tail;

static int
kmdb_prom_getchar(int wait)
{
        struct cons_polledio *pio = mdb.m_pio;
        uintptr_t ischar;
        uintptr_t getchar;
        uintptr_t arg;

        if (pio == NULL || pio->cons_polledio_getchar == NULL) {
                int c;
                while ((c = prom_mayget()) == -1) {
                        if (!wait)
                                return (-1);
                }
                return (c);
        }

        ischar = (uintptr_t)pio->cons_polledio_ischar;
        getchar = (uintptr_t)pio->cons_polledio_getchar;
        arg = (uintptr_t)pio->cons_polledio_argument;

        if (!wait && ischar != NULL && !kmdb_dpi_call(ischar, 1, &arg))
                return (-1);

        return ((int)kmdb_dpi_call(getchar, 1, &arg));
}

static ssize_t
kmdb_prom_polled_write(caddr_t buf, size_t len)
{
        uintptr_t args[2];
        int i;

        args[0] = (uintptr_t)mdb.m_pio->cons_polledio_argument;

        for (i = 0; i < len; i++) {
                args[1] = *buf++;
                (void) kmdb_dpi_call(
                    (uintptr_t)mdb.m_pio->cons_polledio_putchar, 2, args);
        }

        return (len);
}

static ssize_t
kmdb_prom_reader(caddr_t buf, size_t len, int wait)
{
        int nread = 0;
        int c;

        while (nread < len) {
                if ((c = kmdb_prom_getchar(wait)) == -1)
                        break;

                *buf++ = (char)c;
                nread++;
                wait = 0;
        }

        return (nread);
}

static ssize_t
kmdb_prom_writer(caddr_t buf, size_t len)
{
        if (mdb.m_pio != NULL && mdb.m_pio->cons_polledio_putchar != NULL)
                return (kmdb_prom_polled_write(buf, len));

        return (kmdb_prom_obp_writer(buf, len));
}

/*
 * Due to the nature of kmdb, we don't have signals.  This prevents us from
 * receiving asynchronous notification when the user would like to abort active
 * dcmds.  Whereas mdb can simply declare a SIGINT handler, we must
 * occasionally poll the input stream, looking for pending ^C characters.  To
 * give the illusion of asynchronous interrupt delivery, this polling is
 * triggered from several commonly-used functions, such as kmdb_prom_write and
 * the *read and *write target ops.  When an interrupt check is triggered, we
 * read through pending input, looking for interrupt characters.  If we find
 * one, we deliver an interrupt immediately.
 *
 * In a read context, we can deliver the interrupt character directly back to
 * the termio handler rather than raising an interrupt.
 *
 * OBP doesn't have an "unget" facility.  Any character read for interrupt
 * checking is gone forever, unless we save it.  Loss of these characters
 * would prevent us from supporting typeahead.  We like typeahead, so we're
 * going to save characters gathered during interrupt checking.  As with
 * ungetc(3c), however, we can only store a finite number of characters in
 * our typeahead buffer.  Characters read beyond that will be silently dropped
 * after they undergo interrupt processing.
 *
 * The typeahead facility is implemented as a ring buffer, stored in
 * kmdb_prom_readbuf.
 */
static size_t
kmdb_prom_drain_readbuf(void *buf, size_t len)
{
        size_t n, tailread;

        /*
         * If head > tail, life is easy - we can simply read as much as we need
         * in one gulp.
         */
        if (kmdb_prom_readbuf_head > kmdb_prom_readbuf_tail) {
                n = MIN(kmdb_prom_readbuf_head - kmdb_prom_readbuf_tail, len);
                bcopy(kmdb_prom_readbuf + kmdb_prom_readbuf_tail, buf, n);
                kmdb_prom_readbuf_tail += n;
                return (n);

        } else if (kmdb_prom_readbuf_head == kmdb_prom_readbuf_tail) {
                return (0);
        }

        /*
         * The consumable slots wrap around zero (there are slots from tail to
         * zero, and from zero to head).  We have to read them in two parts.
         */
        n = MIN(KMDB_PROM_READBUF_SIZE - kmdb_prom_readbuf_tail, len);
        bcopy(kmdb_prom_readbuf + kmdb_prom_readbuf_tail, buf, n);
        kmdb_prom_readbuf_tail = (kmdb_prom_readbuf_tail + n) %
            KMDB_PROM_READBUF_SIZE;

        if (n == len) {
                /*
                 * We filled the passed buffer from the first part, so there's
                 * no need to read the second.
                 */
                return (n);
        } else {
                tailread = n;
        }

        n = MIN(kmdb_prom_readbuf_head, len - tailread);
        buf = (void *)((uintptr_t)buf + tailread);
        bcopy(kmdb_prom_readbuf, buf, n);

        kmdb_prom_readbuf_tail = (kmdb_prom_readbuf_tail + n) %
            KMDB_PROM_READBUF_SIZE;

        return (tailread + n);
}

static void
check_int(char *buf, size_t len)
{
        int i;

        for (i = 0; i < len; i++) {
                if (buf[i] == CTRL('c')) {
                        kmdb_prom_readbuf_tail = kmdb_prom_readbuf_head;
                        if (mdb.m_intr == 0)
                                longjmp(mdb.m_frame->f_pcb, MDB_ERR_SIGINT);
                        else
                                mdb.m_pend++;
                }
        }
}

/*
 * Attempt to refill the ring buffer from the input stream.  This called from
 * two contexts:
 *
 * Direct read: read the input into our buffer until input is exhausted, or the
 * buffer is full.
 *
 * Interrupt check: called 'asynchronously' from the normal read routines; read
 * the input into our buffer until it is exhausted, discarding input if the
 * buffer is full.  In this case we look ahead for any interrupt characters,
 * delivering an interrupt directly if we find one.
 */
static void
kmdb_prom_fill_readbuf(int check_for_int, int wait)
{
        int oldhead, left, n;

        /*
         * Calculate the number of slots left before we wrap around to the
         * beginning again.
         */
        left = KMDB_PROM_READBUF_SIZE - kmdb_prom_readbuf_head;
        if (kmdb_prom_readbuf_tail == 0)
                left--;

        if (kmdb_prom_readbuf_head == kmdb_prom_readbuf_tail ||
            (kmdb_prom_readbuf_head > kmdb_prom_readbuf_tail && left > 0)) {
                /*
                 * head > tail, so we have to read in two parts - the slots
                 * from head until we wrap back around to zero, and the ones
                 * from zero to tail.  We handle the first part here, and let
                 * the common code handle the second.
                 */
                if ((n = kmdb_prom_reader(kmdb_prom_readbuf +
                    kmdb_prom_readbuf_head, left, wait)) <= 0)
                        return;

                oldhead = kmdb_prom_readbuf_head;
                kmdb_prom_readbuf_head = (kmdb_prom_readbuf_head + n) %
                    KMDB_PROM_READBUF_SIZE;

                if (check_for_int)
                        check_int(kmdb_prom_readbuf + oldhead, n);

                if (n != left)
                        return;
        }

        left = kmdb_prom_readbuf_tail - kmdb_prom_readbuf_head - 1;
        if (left > 0) {
                if ((n = kmdb_prom_reader(kmdb_prom_readbuf +
                    kmdb_prom_readbuf_head, left, wait)) <= 0)
                        return;

                oldhead = kmdb_prom_readbuf_head;
                kmdb_prom_readbuf_head = (kmdb_prom_readbuf_head + n) %
                    KMDB_PROM_READBUF_SIZE;

                if (check_for_int)
                        check_int(kmdb_prom_readbuf + oldhead, n);

                if (n != left)
                        return;
        }

        if (check_for_int) {
                char c;

                while (kmdb_prom_reader(&c, 1, 0) == 1)
                        check_int(&c, 1);
        }
}

void
kmdb_prom_check_interrupt(void)
{
        kmdb_prom_fill_readbuf(1, 0);
}

/*
 * OBP reads are always non-blocking.  If there are characters available,
 * we'll return as many as we can.  If nothing is available, we'll spin
 * until one shows up.
 */
ssize_t
kmdb_prom_read(void *buf, size_t len, struct termios *tio)
{
        size_t totread = 0;
        size_t thisread;
        char *c = (char *)buf;
        int wait = 1;

        for (;;) {
                kmdb_prom_fill_readbuf(0, wait);
                thisread = kmdb_prom_drain_readbuf(c, len);
                len -= thisread;
                totread += thisread;
                c += thisread;

                /* wait until something shows up */
                if (totread == 0)
                        continue;

                wait = 0;

                /*
                 * We're done if we've exhausted available input or if we've
                 * filled the provided buffer.
                 */
                if (len == 0 || thisread == 0)
                        break;
        }

        if (tio->c_iflag & ICRNL) {
                char *cbuf = buf;
                int i;

                for (i = 0; i < totread; i++) {
                        if (cbuf[i] == '\r')
                                cbuf[i] = '\n';
                }
        }

        if (tio->c_lflag & ECHO)
                (void) kmdb_prom_write(buf, totread, tio);

        return (totread);
}

/*ARGSUSED*/
ssize_t
kmdb_prom_write(const void *bufp, size_t len, struct termios *tio)
{
        caddr_t buf = (caddr_t)bufp;
        size_t left = len;
        char *nl = "\r\n";
        char *c;

        kmdb_prom_check_interrupt();

        if (!(tio->c_oflag & ONLCR))
                return (kmdb_prom_writer(buf, left));

        /* translate every \n into \r\n */
        while ((c = strnchr(buf, '\n', left)) != NULL) {
                if (c != buf) {
                        size_t sz = (size_t)(c - buf);
                        (void) kmdb_prom_writer(buf, sz);
                        left -= sz;
                }

                buf = c + 1;
                left--;

                (void) kmdb_prom_writer(nl, 2);
        }

        if (*buf != '\0')
                (void) kmdb_prom_writer(buf, left);

        return (len);
}

static char *
kmdb_get_ttyio_mode(kmdb_auxv_t *kav, char *devname)
{
        char *modepname, *modepval;

        modepname = mdb_alloc(strlen(devname) + 5 + 1, UM_SLEEP);
        (void) strcpy(modepname, devname);
        (void) strcat(modepname, "-mode");

        modepval = kmdb_prom_get_ddi_prop(kav, modepname);

        strfree(modepname);

        return (modepval);
}

static int
termios_setispeed(struct termios *tip, speed_t s)
{
        if (s > (2 * CBAUD + 1))
                return (-1);

        if ((s << IBSHIFT) > CIBAUD) {
                tip->c_cflag |= CIBAUDEXT;
                s -= ((CIBAUD >> IBSHIFT) + 1);
        } else
                tip->c_cflag &= ~CIBAUDEXT;

        tip->c_cflag = (tip->c_cflag & ~CIBAUD) | ((s << IBSHIFT) & CIBAUD);

        return (0);
}

static int
termios_setospeed(struct termios *tip, speed_t s)
{
        if (s > (2 * CBAUD + 1))
                return (-1);

        if (s > CBAUD) {
                tip->c_cflag |= CBAUDEXT;
                s -= (CBAUD + 1);
        } else
                tip->c_cflag &= ~CBAUDEXT;

        tip->c_cflag = (tip->c_cflag & ~CBAUD) | (s & CBAUD);

        return (0);
}

static int
kmdb_parse_mode(const char *mode, struct termios *tip, int in)
{
        static const uint_t baudmap[] = {
                0, 50, 75, 110, 134, 150, 200, 300, 600, 1200,
                1800, 2400, 4800, 9600, 19200, 38400, 57600,
                76800, 115200, 153600, 230400, 307200, 460800, 921600
        };
        static const uint_t bitsmap[] = { CS6, CS6, CS7, CS8 };
        char *m = strdup(mode);
        char *w;
        int rc = -1;
        speed_t speed;
        int baud, i;

        /*
         * termios supports different baud rates and flow control types for
         * input and output, but it requires character width, parity, and stop
         * bits to be equal in input and output.  obp allows them to be
         * different, but we're going to (silently) assume that nobody will use
         * it that way.
         */

        /* baud rate - see baudmap above */
        if ((w = strtok(m, ",")) == NULL)
                goto parse_mode_bail;

        baud = strtol(w, NULL, 10);
        speed = 0;
        for (i = 0; i < sizeof (baudmap) / sizeof (baudmap[0]); i++) {
                if (baudmap[i] == baud) {
                        speed = i;
                        break;
                }
        }
        if (speed == 0)
                goto parse_mode_bail;

        if (in == 1)
                (void) termios_setispeed(tip, speed);
        else
                (void) termios_setospeed(tip, speed);

        /* character width (bits) - 5, 6, 7, or 8 */
        if ((w = strtok(NULL, ",")) == NULL || strlen(w) != 1 || *w < '5' ||
            *w > '8')
                goto parse_mode_bail;
        tip->c_cflag = (tip->c_cflag & ~CSIZE) | bitsmap[*w - '5'];

        /* parity - `n' (none), `e' (even), or `o' (odd) */
        if ((w = strtok(NULL, ",")) == NULL || strlen(w) != 1 ||
            strchr("neo", *w) == NULL)
                goto parse_mode_bail;

        tip->c_cflag = (tip->c_cflag & ~(PARENB|PARODD));
        switch (*w) {
        case 'n':
                /* nothing */
                break;
        case 'e':
                tip->c_cflag |= PARENB;
                break;
        case 'o':
                tip->c_cflag |= PARENB|PARODD;
                break;
        }

        /*
         * stop bits - 1, or 2.  obp can, in theory, support 1.5 bits,
         * but we can't.  how many angels can dance on half of a bit?
         */
        if ((w = strtok(NULL, ",")) == NULL || strlen(w) != 1 || *w < '1' ||
            *w > '2')
                goto parse_mode_bail;

        if (*w == '1')
                tip->c_cflag &= ~CSTOPB;
        else
                tip->c_cflag |= CSTOPB;

        /* flow control - `-' (none), `h' (h/w), or `s' (s/w - XON/XOFF) */
        if ((w = strtok(NULL, ",")) == NULL || strlen(w) != 1 ||
            strchr("-hs", *w) == NULL)
                goto parse_mode_bail;

        tip->c_cflag &= ~(CRTSXOFF|CRTSCTS);
        tip->c_iflag &= ~(IXON|IXANY|IXOFF);

        switch (*w) {
        case 'h':
                tip->c_cflag |= (in == 1 ? CRTSXOFF : CRTSCTS);
                break;

        case 's':
                tip->c_iflag |= (in == 1 ? IXOFF : IXON);
                break;
        }

        rc = 0;

parse_mode_bail:
        strfree(m);

        return (rc);
}

#ifdef __sparc
#define ATTACHED_TERM_TYPE      "sun"
#else
#define ATTACHED_TERM_TYPE      "sun-color"
#endif

static void
kmdb_prom_term_init(kmdb_auxv_t *kav, kmdb_promif_t *pif)
{
        const char ccs[NCCS] = { 0x03, 0x1c, 0x08, 0x15, 0x04, 0x00, 0x00,
            0x00, 0x11, 0x13, 0x1a, 0x19, 0x12, 0x0f, 0x17, 0x16 };
        char *conin = NULL, *conout = NULL;

        if (kmdb_prom_stdout_is_framebuffer(kav))
                pif->pif_oterm = ATTACHED_TERM_TYPE;

        bzero(&pif->pif_tios, sizeof (struct termios));

        /* output device characteristics */
        if ((conout = kmdb_prom_get_ddi_prop(kav, "output-device")) ==
            NULL || strcmp(conout, "screen") == 0) {
                (void) kmdb_parse_mode(KMDB_PROM_DEF_CONS_MODE,
                    &pif->pif_tios, 0);
        } else if (*conout == '/') {
                /*
                 * We're not going to be able to get characteristics for a
                 * device that's specified as a path, so don't even try.
                 * Conveniently, this allows us to avoid chattering on
                 * Serengetis.
                 */
                (void) kmdb_parse_mode(KMDB_PROM_DEF_CONS_MODE,
                    &pif->pif_tios, 0);
        } else {
                char *mode = kmdb_get_ttyio_mode(kav, conout);

#ifdef __sparc
                /*
                 * Some platforms (Starfire) define a value of `ttya' for
                 * output-device, but neglect to provide a specific property
                 * with the characteristics.  We'll provide a default value.
                 */
                if (mode == NULL && strcmp(conout, "ttya") == 0) {
                        (void) kmdb_parse_mode(KMDB_PROM_DEF_CONS_MODE,
                            &pif->pif_tios, 0);
                } else
#endif
                {
                        if (mode == NULL || kmdb_parse_mode(mode,
                            &pif->pif_tios, 0) < 0) {
                                /*
                                 * Either we couldn't retrieve the
                                 * characteristics for this console, or they
                                 * weren't parseable.  The console hasn't been
                                 * set up yet, so we can't warn.  We'll have to
                                 * silently fall back to the default
                                 * characteristics.
                                 */
                                (void) kmdb_parse_mode(KMDB_PROM_DEF_CONS_MODE,
                                    &pif->pif_tios, 0);
                        }
                }

                if (mode != NULL)
                        kmdb_prom_free_ddi_prop(mode);
        }

        /* input device characteristics */
        if ((conin = kmdb_prom_get_ddi_prop(kav, "input-device")) == NULL ||
            strcmp(conin, "keyboard") == 0) {
                (void) kmdb_parse_mode(KMDB_PROM_DEF_CONS_MODE,
                    &pif->pif_tios, 1);
        } else if (*conin == '/') {
                /* See similar case in output-device above */
                (void) kmdb_parse_mode(KMDB_PROM_DEF_CONS_MODE,
                    &pif->pif_tios, 1);
        } else {
                char *mode = kmdb_get_ttyio_mode(kav, conin);

#ifdef __sparc
                /*
                 * Some platforms (Starfire) define a value of `ttya' for
                 * input-device, but neglect to provide a specific property
                 * with the characteristics.  We'll provide a default value.
                 */
                if (mode == NULL && strcmp(conin, "ttya") == 0) {
                        (void) kmdb_parse_mode(KMDB_PROM_DEF_CONS_MODE,
                            &pif->pif_tios, 1);
                } else
#endif
                {
                        if (mode == NULL || kmdb_parse_mode(mode,
                            &pif->pif_tios, 1) < 0) {
                                /*
                                 * Either we couldn't retrieve the
                                 * characteristics for this console, or they
                                 * weren't parseable.  The console hasn't been
                                 * set up yet, so we can't warn.  We'll have to
                                 * silently fall back to the default
                                 * characteristics.
                                 */
                                (void) kmdb_parse_mode(KMDB_PROM_DEF_CONS_MODE,
                                    &pif->pif_tios, 1);
                        }
                }

                if (mode != NULL)
                        kmdb_prom_free_ddi_prop(mode);
        }

        /* various characteristics of the prom read/write interface */
        pif->pif_tios.c_iflag |= ICRNL;
        pif->pif_tios.c_lflag |= ECHO;
        bcopy(ccs, &pif->pif_tios.c_cc, sizeof (ccs));

        if (conin != NULL)
                kmdb_prom_free_ddi_prop(conin);
        if (conout != NULL)
                kmdb_prom_free_ddi_prop(conout);
}

char *
kmdb_prom_term_type(void)
{
        return (mdb.m_promif->pif_oterm);
}

int
kmdb_prom_term_ctl(int req, void *arg)
{
        switch (req) {
        case TCGETS: {
                struct termios *ti = arg;
                bcopy(&mdb.m_promif->pif_tios, ti, sizeof (struct termios));
                return (0);
        }
        case TIOCGWINSZ:
                /*
                 * When kmdb is used over a serial console, we have no idea how
                 * large the terminal window is.  When we're invoked on a local
                 * console, however, we do, and need to share that information
                 * with the debugger in order to contradict potentially
                 * incorrect sizing information retrieved from the terminfo
                 * database.  One specific case where this happens is with the
                 * Intel console, which is 80x25.  The terminfo entry for
                 * sun-color -- the default terminal type for local Intel
                 * consoles -- was cloned from sun, which has a height of 34
                 * rows.
                 */
                if (mdb.m_promif->pif_oterm != NULL) {
                        struct winsize *wsz = arg;
                        wsz->ws_row = KMDB_PIF_WINSIZE_ROWS;
                        wsz->ws_col = KMDB_PIF_WINSIZE_COLS;
                        wsz->ws_xpixel = wsz->ws_ypixel = 0;
                        return (0);
                }

                return (set_errno(ENOTSUP));
        default:
                return (set_errno(EINVAL));
        }
}

int
kmdb_prom_vtop(uintptr_t virt, physaddr_t *pap)
{
        physaddr_t pa;
        int rc = kmdb_kdi_vtop(virt, &pa);

#ifdef  __sparc
        if (rc < 0 && errno == EAGAIN)
                rc = kmdb_prom_translate_virt(virt, &pa);
#endif

        if (rc == 0 && pap != NULL)
                *pap = pa;

        return (rc);
}

void
kmdb_prom_debugger_entry(void)
{
        /*
         * While kmdb_prom_debugger_entry and kmdb_prom_debugger_exit are not
         * guaranteed to be called an identical number of times (an intentional
         * debugger fault will cause an additional entry call without a matching
         * exit call), we must ensure that the polled I/O entry and exit calls
         * match.
         */
        if (mdb.m_pio == NULL) {
                mdb.m_pio = kmdb_kdi_get_polled_io();

                if (mdb.m_pio != NULL &&
                    mdb.m_pio->cons_polledio_enter != NULL) {
                        (void) kmdb_dpi_call(
                            (uintptr_t)mdb.m_pio->cons_polledio_enter, 1,
                            (uintptr_t *)&mdb.m_pio->cons_polledio_argument);
                }
        }
}

void
kmdb_prom_debugger_exit(void)
{
        if (mdb.m_pio != NULL && mdb.m_pio->cons_polledio_exit != NULL) {
                (void) kmdb_dpi_call((uintptr_t)mdb.m_pio->cons_polledio_exit,
                    1, (uintptr_t *)&mdb.m_pio->cons_polledio_argument);
        }

        mdb.m_pio = NULL;
}

#ifdef DEBUG
/*
 * The prom_* files use ASSERT, which is #defined as assfail().
 * We need to redirect that to our assert function.
 */
int
kmdb_prom_assfail(const char *assertion, const char *file, int line)
{
        (void) mdb_dassert(assertion, file, line);
        /*NOTREACHED*/
        return (0);
}
#endif

/*
 * Begin the initialization of the debugger/PROM interface.  Initialization is
 * performed in two steps due to interlocking dependencies between promif and
 * both the memory allocator and mdb_create.  The first phase is performed
 * before either of the others have been initialized, and thus must neither
 * attempt to allocate memory nor access/write to `mdb'.
 */
void
kmdb_prom_init_begin(char *pgmname, kmdb_auxv_t *kav)
{
#ifdef sun4v
        if (kav->kav_domaining)
                kmdb_prom_init_promif(pgmname, kav);
        else
                prom_init(pgmname, kav->kav_romp);
#else
        prom_init(pgmname, kav->kav_romp);
#endif

        /* Initialize the interrupt ring buffer */
        kmdb_prom_readbuf_head = kmdb_prom_readbuf_tail;

#if defined(__i386) || defined(__amd64)
        kmdb_sysp = kav->kav_romp;
#endif
}

#ifdef sun4v
void
kmdb_prom_init_promif(char *pgmname, kmdb_auxv_t *kav)
{
        ASSERT(kav->kav_domaining);
        cif_init(pgmname, kav->kav_promif_root,
            kav->kav_promif_in, kav->kav_promif_out,
            kav->kav_promif_pin, kav->kav_promif_pout,
            kav->kav_promif_chosennode, kav->kav_promif_optionsnode);
}
#endif

/*
 * Conclude the initialization of the debugger/PROM interface.  Memory
 * allocation and the global `mdb' object are now available.
 */
void
kmdb_prom_init_finish(kmdb_auxv_t *kav)
{
        mdb.m_promif = mdb_zalloc(sizeof (kmdb_promif_t), UM_SLEEP);
        kmdb_prom_term_init(kav, mdb.m_promif);
}