8322 nl: misleading-indentation
[unleashed/tickless.git] / usr / src / cmd / zoneadmd / zoneadmd.c
blob3d265063e7c3c5c8ec678e47f7d5387088412250
1 /*
2 * CDDL HEADER START
4 * The contents of this file are subject to the terms of the
5 * Common Development and Distribution License (the "License").
6 * You may not use this file except in compliance with the License.
8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9 * or http://www.opensolaris.org/os/licensing.
10 * See the License for the specific language governing permissions
11 * and limitations under the License.
13 * When distributing Covered Code, include this CDDL HEADER in each
14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15 * If applicable, add the following below this CDDL HEADER, with the
16 * fields enclosed by brackets "[]" replaced with your own identifying
17 * information: Portions Copyright [yyyy] [name of copyright owner]
19 * CDDL HEADER END
23 * Copyright (c) 2003, 2010, Oracle and/or its affiliates. All rights reserved.
24 * Copyright 2014 Nexenta Systems, Inc. All rights reserved.
25 * Copyright (c) 2016 by Delphix. All rights reserved.
29 * zoneadmd manages zones; one zoneadmd process is launched for each
30 * non-global zone on the system. This daemon juggles four jobs:
32 * - Implement setup and teardown of the zone "virtual platform": mount and
33 * unmount filesystems; create and destroy network interfaces; communicate
34 * with devfsadmd to lay out devices for the zone; instantiate the zone
35 * console device; configure process runtime attributes such as resource
36 * controls, pool bindings, fine-grained privileges.
38 * - Launch the zone's init(1M) process.
40 * - Implement a door server; clients (like zoneadm) connect to the door
41 * server and request zone state changes. The kernel is also a client of
42 * this door server. A request to halt or reboot the zone which originates
43 * *inside* the zone results in a door upcall from the kernel into zoneadmd.
45 * One minor problem is that messages emitted by zoneadmd need to be passed
46 * back to the zoneadm process making the request. These messages need to
47 * be rendered in the client's locale; so, this is passed in as part of the
48 * request. The exception is the kernel upcall to zoneadmd, in which case
49 * messages are syslog'd.
51 * To make all of this work, the Makefile adds -a to xgettext to extract *all*
52 * strings, and an exclusion file (zoneadmd.xcl) is used to exclude those
53 * strings which do not need to be translated.
55 * - Act as a console server for zlogin -C processes; see comments in zcons.c
56 * for more information about the zone console architecture.
58 * DESIGN NOTES
60 * Restart:
61 * A chief design constraint of zoneadmd is that it should be restartable in
62 * the case that the administrator kills it off, or it suffers a fatal error,
63 * without the running zone being impacted; this is akin to being able to
64 * reboot the service processor of a server without affecting the OS instance.
67 #include <sys/param.h>
68 #include <sys/mman.h>
69 #include <sys/types.h>
70 #include <sys/stat.h>
71 #include <sys/sysmacros.h>
73 #include <bsm/adt.h>
74 #include <bsm/adt_event.h>
76 #include <alloca.h>
77 #include <assert.h>
78 #include <errno.h>
79 #include <door.h>
80 #include <fcntl.h>
81 #include <locale.h>
82 #include <signal.h>
83 #include <stdarg.h>
84 #include <stdio.h>
85 #include <stdlib.h>
86 #include <string.h>
87 #include <strings.h>
88 #include <synch.h>
89 #include <syslog.h>
90 #include <thread.h>
91 #include <unistd.h>
92 #include <wait.h>
93 #include <limits.h>
94 #include <zone.h>
95 #include <libbrand.h>
96 #include <sys/brand.h>
97 #include <libcontract.h>
98 #include <libcontract_priv.h>
99 #include <sys/brand.h>
100 #include <sys/contract/process.h>
101 #include <sys/ctfs.h>
102 #include <libdladm.h>
103 #include <sys/dls_mgmt.h>
104 #include <libscf.h>
106 #include <libzonecfg.h>
107 #include <zonestat_impl.h>
108 #include "zoneadmd.h"
110 static char *progname;
111 char *zone_name; /* zone which we are managing */
112 char pool_name[MAXNAMELEN];
113 char default_brand[MAXNAMELEN];
114 char brand_name[MAXNAMELEN];
115 boolean_t zone_isnative;
116 boolean_t zone_iscluster;
117 boolean_t zone_islabeled;
118 boolean_t shutdown_in_progress;
119 static zoneid_t zone_id;
120 dladm_handle_t dld_handle = NULL;
122 static char pre_statechg_hook[2 * MAXPATHLEN];
123 static char post_statechg_hook[2 * MAXPATHLEN];
124 char query_hook[2 * MAXPATHLEN];
126 zlog_t logsys;
128 mutex_t lock = DEFAULTMUTEX; /* to serialize stuff */
129 mutex_t msglock = DEFAULTMUTEX; /* for calling setlocale() */
131 static sema_t scratch_sem; /* for scratch zones */
133 static char zone_door_path[MAXPATHLEN];
134 static int zone_door = -1;
136 boolean_t in_death_throes = B_FALSE; /* daemon is dying */
137 boolean_t bringup_failure_recovery = B_FALSE; /* ignore certain failures */
139 #if !defined(TEXT_DOMAIN) /* should be defined by cc -D */
140 #define TEXT_DOMAIN "SYS_TEST" /* Use this only if it wasn't */
141 #endif
143 #define DEFAULT_LOCALE "C"
145 static const char *
146 z_cmd_name(zone_cmd_t zcmd)
148 /* This list needs to match the enum in sys/zone.h */
149 static const char *zcmdstr[] = {
150 "ready", "boot", "forceboot", "reboot", "halt",
151 "note_uninstalling", "mount", "forcemount", "unmount",
152 "shutdown"
155 if (zcmd >= sizeof (zcmdstr) / sizeof (*zcmdstr))
156 return ("unknown");
157 else
158 return (zcmdstr[(int)zcmd]);
161 static char *
162 get_execbasename(char *execfullname)
164 char *last_slash, *execbasename;
166 /* guard against '/' at end of command invocation */
167 for (;;) {
168 last_slash = strrchr(execfullname, '/');
169 if (last_slash == NULL) {
170 execbasename = execfullname;
171 break;
172 } else {
173 execbasename = last_slash + 1;
174 if (*execbasename == '\0') {
175 *last_slash = '\0';
176 continue;
178 break;
181 return (execbasename);
184 static void
185 usage(void)
187 (void) fprintf(stderr, gettext("Usage: %s -z zonename\n"), progname);
188 (void) fprintf(stderr,
189 gettext("\tNote: %s should not be run directly.\n"), progname);
190 exit(2);
193 /* ARGSUSED */
194 static void
195 sigchld(int sig)
199 char *
200 localize_msg(char *locale, const char *msg)
202 char *out;
204 (void) mutex_lock(&msglock);
205 (void) setlocale(LC_MESSAGES, locale);
206 out = gettext(msg);
207 (void) setlocale(LC_MESSAGES, DEFAULT_LOCALE);
208 (void) mutex_unlock(&msglock);
209 return (out);
212 /* PRINTFLIKE3 */
213 void
214 zerror(zlog_t *zlogp, boolean_t use_strerror, const char *fmt, ...)
216 va_list alist;
217 char buf[MAXPATHLEN * 2]; /* enough space for err msg with a path */
218 char *bp;
219 int saved_errno = errno;
221 if (zlogp == NULL)
222 return;
223 if (zlogp == &logsys)
224 (void) snprintf(buf, sizeof (buf), "[zone '%s'] ",
225 zone_name);
226 else
227 buf[0] = '\0';
228 bp = &(buf[strlen(buf)]);
231 * In theory, the locale pointer should be set to either "C" or a
232 * char array, so it should never be NULL
234 assert(zlogp->locale != NULL);
235 /* Locale is per process, but we are multi-threaded... */
236 fmt = localize_msg(zlogp->locale, fmt);
238 va_start(alist, fmt);
239 (void) vsnprintf(bp, sizeof (buf) - (bp - buf), fmt, alist);
240 va_end(alist);
241 bp = &(buf[strlen(buf)]);
242 if (use_strerror)
243 (void) snprintf(bp, sizeof (buf) - (bp - buf), ": %s",
244 strerror(saved_errno));
245 if (zlogp == &logsys) {
246 (void) syslog(LOG_ERR, "%s", buf);
247 } else if (zlogp->logfile != NULL) {
248 (void) fprintf(zlogp->logfile, "%s\n", buf);
249 } else {
250 size_t buflen;
251 size_t copylen;
253 buflen = snprintf(zlogp->log, zlogp->loglen, "%s\n", buf);
254 copylen = MIN(buflen, zlogp->loglen);
255 zlogp->log += copylen;
256 zlogp->loglen -= copylen;
261 * Emit a warning for any boot arguments which are unrecognized. Since
262 * Solaris boot arguments are getopt(3c) compatible (see kernel(1m)), we
263 * put the arguments into an argv style array, use getopt to process them,
264 * and put the resultant argument string back into outargs.
266 * During the filtering, we pull out any arguments which are truly "boot"
267 * arguments, leaving only those which are to be passed intact to the
268 * progenitor process. The one we support at the moment is -i, which
269 * indicates to the kernel which program should be launched as 'init'.
271 * A return of Z_INVAL indicates specifically that the arguments are
272 * not valid; this is a non-fatal error. Except for Z_OK, all other return
273 * values are treated as fatal.
275 static int
276 filter_bootargs(zlog_t *zlogp, const char *inargs, char *outargs,
277 char *init_file, char *badarg)
279 int argc = 0, argc_save;
280 int i;
281 int err;
282 char *arg, *lasts, **argv = NULL, **argv_save;
283 char zonecfg_args[BOOTARGS_MAX];
284 char scratchargs[BOOTARGS_MAX], *sargs;
285 char c;
287 bzero(outargs, BOOTARGS_MAX);
288 bzero(badarg, BOOTARGS_MAX);
291 * If the user didn't specify transient boot arguments, check
292 * to see if there were any specified in the zone configuration,
293 * and use them if applicable.
295 if (inargs == NULL || inargs[0] == '\0') {
296 zone_dochandle_t handle;
297 if ((handle = zonecfg_init_handle()) == NULL) {
298 zerror(zlogp, B_TRUE,
299 "getting zone configuration handle");
300 return (Z_BAD_HANDLE);
302 err = zonecfg_get_snapshot_handle(zone_name, handle);
303 if (err != Z_OK) {
304 zerror(zlogp, B_FALSE,
305 "invalid configuration snapshot");
306 zonecfg_fini_handle(handle);
307 return (Z_BAD_HANDLE);
310 bzero(zonecfg_args, sizeof (zonecfg_args));
311 (void) zonecfg_get_bootargs(handle, zonecfg_args,
312 sizeof (zonecfg_args));
313 inargs = zonecfg_args;
314 zonecfg_fini_handle(handle);
317 if (strlen(inargs) >= BOOTARGS_MAX) {
318 zerror(zlogp, B_FALSE, "boot argument string too long");
319 return (Z_INVAL);
322 (void) strlcpy(scratchargs, inargs, sizeof (scratchargs));
323 sargs = scratchargs;
324 while ((arg = strtok_r(sargs, " \t", &lasts)) != NULL) {
325 sargs = NULL;
326 argc++;
329 if ((argv = calloc(argc + 1, sizeof (char *))) == NULL) {
330 zerror(zlogp, B_FALSE, "memory allocation failed");
331 return (Z_NOMEM);
334 argv_save = argv;
335 argc_save = argc;
337 (void) strlcpy(scratchargs, inargs, sizeof (scratchargs));
338 sargs = scratchargs;
339 i = 0;
340 while ((arg = strtok_r(sargs, " \t", &lasts)) != NULL) {
341 sargs = NULL;
342 if ((argv[i] = strdup(arg)) == NULL) {
343 err = Z_NOMEM;
344 zerror(zlogp, B_FALSE, "memory allocation failed");
345 goto done;
347 i++;
351 * We preserve compatibility with the Solaris system boot behavior,
352 * which allows:
354 * # reboot kernel/unix -s -m verbose
356 * In this example, kernel/unix tells the booter what file to
357 * boot. We don't want reboot in a zone to be gratuitously different,
358 * so we silently ignore the boot file, if necessary.
360 if (argv[0] == NULL)
361 goto done;
363 assert(argv[0][0] != ' ');
364 assert(argv[0][0] != '\t');
366 if (argv[0][0] != '-' && argv[0][0] != '\0') {
367 argv = &argv[1];
368 argc--;
371 optind = 0;
372 opterr = 0;
373 err = Z_OK;
374 while ((c = getopt(argc, argv, "fi:m:s")) != -1) {
375 switch (c) {
376 case 'i':
378 * -i is handled by the runtime and is not passed
379 * along to userland
381 (void) strlcpy(init_file, optarg, MAXPATHLEN);
382 break;
383 case 'f':
384 /* This has already been processed by zoneadm */
385 break;
386 case 'm':
387 case 's':
388 /* These pass through unmolested */
389 (void) snprintf(outargs, BOOTARGS_MAX,
390 "%s -%c %s ", outargs, c, optarg ? optarg : "");
391 break;
392 case '?':
394 * We warn about unknown arguments but pass them
395 * along anyway-- if someone wants to develop their
396 * own init replacement, they can pass it whatever
397 * args they want.
399 err = Z_INVAL;
400 (void) snprintf(outargs, BOOTARGS_MAX,
401 "%s -%c", outargs, optopt);
402 (void) snprintf(badarg, BOOTARGS_MAX,
403 "%s -%c", badarg, optopt);
404 break;
409 * For Solaris Zones we warn about and discard non-option arguments.
410 * Hence 'boot foo bar baz gub' --> 'boot'. However, to be similar
411 * to the kernel, we concat up all the other remaining boot args.
412 * and warn on them as a group.
414 if (optind < argc) {
415 err = Z_INVAL;
416 while (optind < argc) {
417 (void) snprintf(badarg, BOOTARGS_MAX, "%s%s%s",
418 badarg, strlen(badarg) > 0 ? " " : "",
419 argv[optind]);
420 optind++;
422 zerror(zlogp, B_FALSE, "WARNING: Unused or invalid boot "
423 "arguments `%s'.", badarg);
426 done:
427 for (i = 0; i < argc_save; i++) {
428 if (argv_save[i] != NULL)
429 free(argv_save[i]);
431 free(argv_save);
432 return (err);
436 static int
437 mkzonedir(zlog_t *zlogp)
439 struct stat st;
441 * We must create and lock everyone but root out of ZONES_TMPDIR
442 * since anyone can open any UNIX domain socket, regardless of
443 * its file system permissions. Sigh...
445 if (mkdir(ZONES_TMPDIR, S_IRWXU) < 0 && errno != EEXIST) {
446 zerror(zlogp, B_TRUE, "could not mkdir '%s'", ZONES_TMPDIR);
447 return (-1);
449 /* paranoia */
450 if ((stat(ZONES_TMPDIR, &st) < 0) || !S_ISDIR(st.st_mode)) {
451 zerror(zlogp, B_TRUE, "'%s' is not a directory", ZONES_TMPDIR);
452 return (-1);
454 (void) chmod(ZONES_TMPDIR, S_IRWXU);
455 return (0);
459 * Run the brand's pre-state change callback, if it exists.
461 static int
462 brand_prestatechg(zlog_t *zlogp, int state, int cmd)
464 char cmdbuf[2 * MAXPATHLEN];
465 const char *altroot;
467 if (pre_statechg_hook[0] == '\0')
468 return (0);
470 altroot = zonecfg_get_root();
471 if (snprintf(cmdbuf, sizeof (cmdbuf), "%s %d %d %s", pre_statechg_hook,
472 state, cmd, altroot) > sizeof (cmdbuf))
473 return (-1);
475 if (do_subproc(zlogp, cmdbuf, NULL) != 0)
476 return (-1);
478 return (0);
482 * Run the brand's post-state change callback, if it exists.
484 static int
485 brand_poststatechg(zlog_t *zlogp, int state, int cmd)
487 char cmdbuf[2 * MAXPATHLEN];
488 const char *altroot;
490 if (post_statechg_hook[0] == '\0')
491 return (0);
493 altroot = zonecfg_get_root();
494 if (snprintf(cmdbuf, sizeof (cmdbuf), "%s %d %d %s", post_statechg_hook,
495 state, cmd, altroot) > sizeof (cmdbuf))
496 return (-1);
498 if (do_subproc(zlogp, cmdbuf, NULL) != 0)
499 return (-1);
501 return (0);
505 * Notify zonestatd of the new zone. If zonestatd is not running, this
506 * will do nothing.
508 static void
509 notify_zonestatd(zoneid_t zoneid)
511 int cmd[2];
512 int fd;
513 door_arg_t params;
515 fd = open(ZS_DOOR_PATH, O_RDONLY);
516 if (fd < 0)
517 return;
519 cmd[0] = ZSD_CMD_NEW_ZONE;
520 cmd[1] = zoneid;
521 params.data_ptr = (char *)&cmd;
522 params.data_size = sizeof (cmd);
523 params.desc_ptr = NULL;
524 params.desc_num = 0;
525 params.rbuf = NULL;
526 params.rsize = NULL;
527 (void) door_call(fd, &params);
528 (void) close(fd);
532 * Bring a zone up to the pre-boot "ready" stage. The mount_cmd argument is
533 * 'true' if this is being invoked as part of the processing for the "mount"
534 * subcommand.
536 static int
537 zone_ready(zlog_t *zlogp, zone_mnt_t mount_cmd, int zstate)
539 int err;
541 if (brand_prestatechg(zlogp, zstate, Z_READY) != 0)
542 return (-1);
544 if ((err = zonecfg_create_snapshot(zone_name)) != Z_OK) {
545 zerror(zlogp, B_FALSE, "unable to create snapshot: %s",
546 zonecfg_strerror(err));
547 goto bad;
550 if ((zone_id = vplat_create(zlogp, mount_cmd)) == -1) {
551 if ((err = zonecfg_destroy_snapshot(zone_name)) != Z_OK)
552 zerror(zlogp, B_FALSE, "destroying snapshot: %s",
553 zonecfg_strerror(err));
554 goto bad;
556 if (vplat_bringup(zlogp, mount_cmd, zone_id) != 0) {
557 bringup_failure_recovery = B_TRUE;
558 (void) vplat_teardown(NULL, (mount_cmd != Z_MNT_BOOT), B_FALSE);
559 if ((err = zonecfg_destroy_snapshot(zone_name)) != Z_OK)
560 zerror(zlogp, B_FALSE, "destroying snapshot: %s",
561 zonecfg_strerror(err));
562 goto bad;
565 if (brand_poststatechg(zlogp, zstate, Z_READY) != 0)
566 goto bad;
568 return (0);
570 bad:
572 * If something goes wrong, we up the zones's state to the target
573 * state, READY, and then invoke the hook as if we're halting.
575 (void) brand_poststatechg(zlogp, ZONE_STATE_READY, Z_HALT);
576 return (-1);
580 init_template(void)
582 int fd;
583 int err = 0;
585 fd = open64(CTFS_ROOT "/process/template", O_RDWR);
586 if (fd == -1)
587 return (-1);
590 * For now, zoneadmd doesn't do anything with the contract.
591 * Deliver no events, don't inherit, and allow it to be orphaned.
593 err |= ct_tmpl_set_critical(fd, 0);
594 err |= ct_tmpl_set_informative(fd, 0);
595 err |= ct_pr_tmpl_set_fatal(fd, CT_PR_EV_HWERR);
596 err |= ct_pr_tmpl_set_param(fd, CT_PR_PGRPONLY | CT_PR_REGENT);
597 if (err || ct_tmpl_activate(fd)) {
598 (void) close(fd);
599 return (-1);
602 return (fd);
605 typedef struct fs_callback {
606 zlog_t *zlogp;
607 zoneid_t zoneid;
608 boolean_t mount_cmd;
609 } fs_callback_t;
611 static int
612 mount_early_fs(void *data, const char *spec, const char *dir,
613 const char *fstype, const char *opt)
615 zlog_t *zlogp = ((fs_callback_t *)data)->zlogp;
616 zoneid_t zoneid = ((fs_callback_t *)data)->zoneid;
617 boolean_t mount_cmd = ((fs_callback_t *)data)->mount_cmd;
618 char rootpath[MAXPATHLEN];
619 pid_t child;
620 int child_status;
621 int tmpl_fd;
622 int rv;
623 ctid_t ct;
625 /* determine the zone rootpath */
626 if (mount_cmd) {
627 char zonepath[MAXPATHLEN];
628 char luroot[MAXPATHLEN];
630 if (zone_get_zonepath(zone_name,
631 zonepath, sizeof (zonepath)) != Z_OK) {
632 zerror(zlogp, B_FALSE, "unable to determine zone path");
633 return (-1);
636 (void) snprintf(luroot, sizeof (luroot), "%s/lu", zonepath);
637 resolve_lofs(zlogp, luroot, sizeof (luroot));
638 (void) strlcpy(rootpath, luroot, sizeof (rootpath));
639 } else {
640 if (zone_get_rootpath(zone_name,
641 rootpath, sizeof (rootpath)) != Z_OK) {
642 zerror(zlogp, B_FALSE, "unable to determine zone root");
643 return (-1);
647 if ((rv = valid_mount_path(zlogp, rootpath, spec, dir, fstype)) < 0) {
648 zerror(zlogp, B_FALSE, "%s%s is not a valid mount point",
649 rootpath, dir);
650 return (-1);
651 } else if (rv > 0) {
652 /* The mount point path doesn't exist, create it now. */
653 if (make_one_dir(zlogp, rootpath, dir,
654 DEFAULT_DIR_MODE, DEFAULT_DIR_USER,
655 DEFAULT_DIR_GROUP) != 0) {
656 zerror(zlogp, B_FALSE, "failed to create mount point");
657 return (-1);
661 * Now this might seem weird, but we need to invoke
662 * valid_mount_path() again. Why? Because it checks
663 * to make sure that the mount point path is canonical,
664 * which it can only do if the path exists, so now that
665 * we've created the path we have to verify it again.
667 if ((rv = valid_mount_path(zlogp, rootpath, spec, dir,
668 fstype)) < 0) {
669 zerror(zlogp, B_FALSE,
670 "%s%s is not a valid mount point", rootpath, dir);
671 return (-1);
675 if ((tmpl_fd = init_template()) == -1) {
676 zerror(zlogp, B_TRUE, "failed to create contract");
677 return (-1);
680 if ((child = fork()) == -1) {
681 (void) ct_tmpl_clear(tmpl_fd);
682 (void) close(tmpl_fd);
683 zerror(zlogp, B_TRUE, "failed to fork");
684 return (-1);
686 } else if (child == 0) { /* child */
687 char opt_buf[MAX_MNTOPT_STR];
688 int optlen = 0;
689 int mflag = MS_DATA;
691 (void) ct_tmpl_clear(tmpl_fd);
693 * Even though there are no procs running in the zone, we
694 * do this for paranoia's sake.
696 (void) closefrom(0);
698 if (zone_enter(zoneid) == -1) {
699 _exit(errno);
701 if (opt != NULL) {
703 * The mount() system call is incredibly annoying.
704 * If options are specified, we need to copy them
705 * into a temporary buffer since the mount() system
706 * call will overwrite the options string. It will
707 * also fail if the new option string it wants to
708 * write is bigger than the one we passed in, so
709 * you must pass in a buffer of the maximum possible
710 * option string length. sigh.
712 (void) strlcpy(opt_buf, opt, sizeof (opt_buf));
713 opt = opt_buf;
714 optlen = MAX_MNTOPT_STR;
715 mflag = MS_OPTIONSTR;
717 if (mount(spec, dir, mflag, fstype, NULL, 0, opt, optlen) != 0)
718 _exit(errno);
719 _exit(0);
722 /* parent */
723 if (contract_latest(&ct) == -1)
724 ct = -1;
725 (void) ct_tmpl_clear(tmpl_fd);
726 (void) close(tmpl_fd);
727 if (waitpid(child, &child_status, 0) != child) {
728 /* unexpected: we must have been signalled */
729 (void) contract_abandon_id(ct);
730 return (-1);
732 (void) contract_abandon_id(ct);
733 if (WEXITSTATUS(child_status) != 0) {
734 errno = WEXITSTATUS(child_status);
735 zerror(zlogp, B_TRUE, "mount of %s failed", dir);
736 return (-1);
739 return (0);
743 * If retstr is not NULL, the output of the subproc is returned in the str,
744 * otherwise it is output using zerror(). Any memory allocated for retstr
745 * should be freed by the caller.
748 do_subproc(zlog_t *zlogp, char *cmdbuf, char **retstr)
750 char buf[1024]; /* arbitrary large amount */
751 char *inbuf;
752 FILE *file;
753 int status;
754 int rd_cnt;
756 if (retstr != NULL) {
757 if ((*retstr = malloc(1024)) == NULL) {
758 zerror(zlogp, B_FALSE, "out of memory");
759 return (-1);
761 inbuf = *retstr;
762 rd_cnt = 0;
763 } else {
764 inbuf = buf;
767 file = popen(cmdbuf, "r");
768 if (file == NULL) {
769 zerror(zlogp, B_TRUE, "could not launch: %s", cmdbuf);
770 return (-1);
773 while (fgets(inbuf, 1024, file) != NULL) {
774 if (retstr == NULL) {
775 if (zlogp != &logsys)
776 zerror(zlogp, B_FALSE, "%s", inbuf);
777 } else {
778 char *p;
780 rd_cnt += 1024 - 1;
781 if ((p = realloc(*retstr, rd_cnt + 1024)) == NULL) {
782 zerror(zlogp, B_FALSE, "out of memory");
783 (void) pclose(file);
784 return (-1);
787 *retstr = p;
788 inbuf = *retstr + rd_cnt;
791 status = pclose(file);
793 if (WIFSIGNALED(status)) {
794 zerror(zlogp, B_FALSE, "%s unexpectedly terminated due to "
795 "signal %d", cmdbuf, WTERMSIG(status));
796 return (-1);
798 assert(WIFEXITED(status));
799 if (WEXITSTATUS(status) == ZEXIT_EXEC) {
800 zerror(zlogp, B_FALSE, "failed to exec %s", cmdbuf);
801 return (-1);
803 return (WEXITSTATUS(status));
806 static int
807 zone_bootup(zlog_t *zlogp, const char *bootargs, int zstate)
809 zoneid_t zoneid;
810 struct stat st;
811 char zpath[MAXPATHLEN], initpath[MAXPATHLEN], init_file[MAXPATHLEN];
812 char nbootargs[BOOTARGS_MAX];
813 char cmdbuf[MAXPATHLEN];
814 fs_callback_t cb;
815 brand_handle_t bh;
816 zone_iptype_t iptype;
817 boolean_t links_loaded = B_FALSE;
818 dladm_status_t status;
819 char errmsg[DLADM_STRSIZE];
820 int err;
821 boolean_t restart_init;
823 if (brand_prestatechg(zlogp, zstate, Z_BOOT) != 0)
824 return (-1);
826 if ((zoneid = getzoneidbyname(zone_name)) == -1) {
827 zerror(zlogp, B_TRUE, "unable to get zoneid");
828 goto bad;
831 cb.zlogp = zlogp;
832 cb.zoneid = zoneid;
833 cb.mount_cmd = B_FALSE;
835 /* Get a handle to the brand info for this zone */
836 if ((bh = brand_open(brand_name)) == NULL) {
837 zerror(zlogp, B_FALSE, "unable to determine zone brand");
838 goto bad;
842 * Get the list of filesystems to mount from the brand
843 * configuration. These mounts are done via a thread that will
844 * enter the zone, so they are done from within the context of the
845 * zone.
847 if (brand_platform_iter_mounts(bh, mount_early_fs, &cb) != 0) {
848 zerror(zlogp, B_FALSE, "unable to mount filesystems");
849 brand_close(bh);
850 goto bad;
854 * Get the brand's boot callback if it exists.
856 if (zone_get_zonepath(zone_name, zpath, sizeof (zpath)) != Z_OK) {
857 zerror(zlogp, B_FALSE, "unable to determine zone path");
858 brand_close(bh);
859 goto bad;
861 (void) strcpy(cmdbuf, EXEC_PREFIX);
862 if (brand_get_boot(bh, zone_name, zpath, cmdbuf + EXEC_LEN,
863 sizeof (cmdbuf) - EXEC_LEN) != 0) {
864 zerror(zlogp, B_FALSE,
865 "unable to determine branded zone's boot callback");
866 brand_close(bh);
867 goto bad;
870 /* Get the path for this zone's init(1M) (or equivalent) process. */
871 if (brand_get_initname(bh, init_file, MAXPATHLEN) != 0) {
872 zerror(zlogp, B_FALSE,
873 "unable to determine zone's init(1M) location");
874 brand_close(bh);
875 goto bad;
878 /* See if this zone's brand should restart init if it dies. */
879 restart_init = brand_restartinit(bh);
881 brand_close(bh);
883 err = filter_bootargs(zlogp, bootargs, nbootargs, init_file,
884 bad_boot_arg);
885 if (err == Z_INVAL)
886 eventstream_write(Z_EVT_ZONE_BADARGS);
887 else if (err != Z_OK)
888 goto bad;
890 assert(init_file[0] != '\0');
892 /* Try to anticipate possible problems: Make sure init is executable. */
893 if (zone_get_rootpath(zone_name, zpath, sizeof (zpath)) != Z_OK) {
894 zerror(zlogp, B_FALSE, "unable to determine zone root");
895 goto bad;
898 (void) snprintf(initpath, sizeof (initpath), "%s%s", zpath, init_file);
900 if (stat(initpath, &st) == -1) {
901 zerror(zlogp, B_TRUE, "could not stat %s", initpath);
902 goto bad;
905 if ((st.st_mode & S_IXUSR) == 0) {
906 zerror(zlogp, B_FALSE, "%s is not executable", initpath);
907 goto bad;
911 * Exclusive stack zones interact with the dlmgmtd running in the
912 * global zone. dladm_zone_boot() tells dlmgmtd that this zone is
913 * booting, and loads its datalinks from the zone's datalink
914 * configuration file.
916 if (vplat_get_iptype(zlogp, &iptype) == 0 && iptype == ZS_EXCLUSIVE) {
917 status = dladm_zone_boot(dld_handle, zoneid);
918 if (status != DLADM_STATUS_OK) {
919 zerror(zlogp, B_FALSE, "unable to load zone datalinks: "
920 " %s", dladm_status2str(status, errmsg));
921 goto bad;
923 links_loaded = B_TRUE;
927 * If there is a brand 'boot' callback, execute it now to give the
928 * brand one last chance to do any additional setup before the zone
929 * is booted.
931 if ((strlen(cmdbuf) > EXEC_LEN) &&
932 (do_subproc(zlogp, cmdbuf, NULL) != Z_OK)) {
933 zerror(zlogp, B_FALSE, "%s failed", cmdbuf);
934 goto bad;
937 if (zone_setattr(zoneid, ZONE_ATTR_INITNAME, init_file, 0) == -1) {
938 zerror(zlogp, B_TRUE, "could not set zone boot file");
939 goto bad;
942 if (zone_setattr(zoneid, ZONE_ATTR_BOOTARGS, nbootargs, 0) == -1) {
943 zerror(zlogp, B_TRUE, "could not set zone boot arguments");
944 goto bad;
947 if (!restart_init && zone_setattr(zoneid, ZONE_ATTR_INITNORESTART,
948 NULL, 0) == -1) {
949 zerror(zlogp, B_TRUE, "could not set zone init-no-restart");
950 goto bad;
954 * Inform zonestatd of a new zone so that it can install a door for
955 * the zone to contact it.
957 notify_zonestatd(zone_id);
959 if (zone_boot(zoneid) == -1) {
960 zerror(zlogp, B_TRUE, "unable to boot zone");
961 goto bad;
964 if (brand_poststatechg(zlogp, zstate, Z_BOOT) != 0)
965 goto bad;
967 return (0);
969 bad:
971 * If something goes wrong, we up the zones's state to the target
972 * state, RUNNING, and then invoke the hook as if we're halting.
974 (void) brand_poststatechg(zlogp, ZONE_STATE_RUNNING, Z_HALT);
975 if (links_loaded)
976 (void) dladm_zone_halt(dld_handle, zoneid);
977 return (-1);
980 static int
981 zone_halt(zlog_t *zlogp, boolean_t unmount_cmd, boolean_t rebooting, int zstate)
983 int err;
985 if (brand_prestatechg(zlogp, zstate, Z_HALT) != 0)
986 return (-1);
988 if (vplat_teardown(zlogp, unmount_cmd, rebooting) != 0) {
989 if (!bringup_failure_recovery)
990 zerror(zlogp, B_FALSE, "unable to destroy zone");
991 return (-1);
994 if ((err = zonecfg_destroy_snapshot(zone_name)) != Z_OK)
995 zerror(zlogp, B_FALSE, "destroying snapshot: %s",
996 zonecfg_strerror(err));
998 if (brand_poststatechg(zlogp, zstate, Z_HALT) != 0)
999 return (-1);
1001 return (0);
1004 static int
1005 zone_graceful_shutdown(zlog_t *zlogp)
1007 zoneid_t zoneid;
1008 pid_t child;
1009 char cmdbuf[MAXPATHLEN];
1010 brand_handle_t bh = NULL;
1011 char zpath[MAXPATHLEN];
1012 ctid_t ct;
1013 int tmpl_fd;
1014 int child_status;
1016 if (shutdown_in_progress) {
1017 zerror(zlogp, B_FALSE, "shutdown already in progress");
1018 return (-1);
1021 if ((zoneid = getzoneidbyname(zone_name)) == -1) {
1022 zerror(zlogp, B_TRUE, "unable to get zoneid");
1023 return (-1);
1026 /* Get a handle to the brand info for this zone */
1027 if ((bh = brand_open(brand_name)) == NULL) {
1028 zerror(zlogp, B_FALSE, "unable to determine zone brand");
1029 return (-1);
1032 if (zone_get_zonepath(zone_name, zpath, sizeof (zpath)) != Z_OK) {
1033 zerror(zlogp, B_FALSE, "unable to determine zone path");
1034 brand_close(bh);
1035 return (-1);
1039 * If there is a brand 'shutdown' callback, execute it now to give the
1040 * brand a chance to cleanup any custom configuration.
1042 (void) strcpy(cmdbuf, EXEC_PREFIX);
1043 if (brand_get_shutdown(bh, zone_name, zpath, cmdbuf + EXEC_LEN,
1044 sizeof (cmdbuf) - EXEC_LEN) != 0 || strlen(cmdbuf) <= EXEC_LEN) {
1045 (void) strcat(cmdbuf, SHUTDOWN_DEFAULT);
1047 brand_close(bh);
1049 if ((tmpl_fd = init_template()) == -1) {
1050 zerror(zlogp, B_TRUE, "failed to create contract");
1051 return (-1);
1054 if ((child = fork()) == -1) {
1055 (void) ct_tmpl_clear(tmpl_fd);
1056 (void) close(tmpl_fd);
1057 zerror(zlogp, B_TRUE, "failed to fork");
1058 return (-1);
1059 } else if (child == 0) {
1060 (void) ct_tmpl_clear(tmpl_fd);
1061 if (zone_enter(zoneid) == -1) {
1062 _exit(errno);
1064 _exit(execl("/bin/sh", "sh", "-c", cmdbuf, (char *)NULL));
1067 if (contract_latest(&ct) == -1)
1068 ct = -1;
1069 (void) ct_tmpl_clear(tmpl_fd);
1070 (void) close(tmpl_fd);
1072 if (waitpid(child, &child_status, 0) != child) {
1073 /* unexpected: we must have been signalled */
1074 (void) contract_abandon_id(ct);
1075 return (-1);
1078 (void) contract_abandon_id(ct);
1079 if (WEXITSTATUS(child_status) != 0) {
1080 errno = WEXITSTATUS(child_status);
1081 zerror(zlogp, B_FALSE, "unable to shutdown zone");
1082 return (-1);
1085 shutdown_in_progress = B_TRUE;
1087 return (0);
1090 static int
1091 zone_wait_shutdown(zlog_t *zlogp)
1093 zone_state_t zstate;
1094 uint64_t *tm = NULL;
1095 scf_simple_prop_t *prop = NULL;
1096 int timeout;
1097 int tries;
1098 int rc = -1;
1100 /* Get default stop timeout from SMF framework */
1101 timeout = SHUTDOWN_WAIT;
1102 if ((prop = scf_simple_prop_get(NULL, SHUTDOWN_FMRI, "stop",
1103 SCF_PROPERTY_TIMEOUT)) != NULL) {
1104 if ((tm = scf_simple_prop_next_count(prop)) != NULL) {
1105 if (tm != 0)
1106 timeout = *tm;
1108 scf_simple_prop_free(prop);
1111 /* allow time for zone to shutdown cleanly */
1112 for (tries = 0; tries < timeout; tries ++) {
1113 (void) sleep(1);
1114 if (zone_get_state(zone_name, &zstate) == Z_OK &&
1115 zstate == ZONE_STATE_INSTALLED) {
1116 rc = 0;
1117 break;
1121 if (rc != 0)
1122 zerror(zlogp, B_FALSE, "unable to shutdown zone");
1124 shutdown_in_progress = B_FALSE;
1126 return (rc);
1132 * Generate AUE_zone_state for a command that boots a zone.
1134 static void
1135 audit_put_record(zlog_t *zlogp, ucred_t *uc, int return_val,
1136 char *new_state)
1138 adt_session_data_t *ah;
1139 adt_event_data_t *event;
1140 int pass_fail, fail_reason;
1142 if (!adt_audit_enabled())
1143 return;
1145 if (return_val == 0) {
1146 pass_fail = ADT_SUCCESS;
1147 fail_reason = ADT_SUCCESS;
1148 } else {
1149 pass_fail = ADT_FAILURE;
1150 fail_reason = ADT_FAIL_VALUE_PROGRAM;
1153 if (adt_start_session(&ah, NULL, 0)) {
1154 zerror(zlogp, B_TRUE, gettext("audit failure."));
1155 return;
1157 if (adt_set_from_ucred(ah, uc, ADT_NEW)) {
1158 zerror(zlogp, B_TRUE, gettext("audit failure."));
1159 (void) adt_end_session(ah);
1160 return;
1163 event = adt_alloc_event(ah, ADT_zone_state);
1164 if (event == NULL) {
1165 zerror(zlogp, B_TRUE, gettext("audit failure."));
1166 (void) adt_end_session(ah);
1167 return;
1169 event->adt_zone_state.zonename = zone_name;
1170 event->adt_zone_state.new_state = new_state;
1172 if (adt_put_event(event, pass_fail, fail_reason))
1173 zerror(zlogp, B_TRUE, gettext("audit failure."));
1175 adt_free_event(event);
1177 (void) adt_end_session(ah);
1181 * The main routine for the door server that deals with zone state transitions.
1183 /* ARGSUSED */
1184 static void
1185 server(void *cookie, char *args, size_t alen, door_desc_t *dp,
1186 uint_t n_desc)
1188 ucred_t *uc = NULL;
1189 const priv_set_t *eset;
1191 zone_state_t zstate;
1192 zone_cmd_t cmd;
1193 zone_cmd_arg_t *zargp;
1195 boolean_t kernelcall;
1197 int rval = -1;
1198 uint64_t uniqid;
1199 zoneid_t zoneid = -1;
1200 zlog_t zlog;
1201 zlog_t *zlogp;
1202 zone_cmd_rval_t *rvalp;
1203 size_t rlen = getpagesize(); /* conservative */
1204 fs_callback_t cb;
1205 brand_handle_t bh;
1206 boolean_t wait_shut = B_FALSE;
1208 /* LINTED E_BAD_PTR_CAST_ALIGN */
1209 zargp = (zone_cmd_arg_t *)args;
1212 * When we get the door unref message, we've fdetach'd the door, and
1213 * it is time for us to shut down zoneadmd.
1215 if (zargp == DOOR_UNREF_DATA) {
1217 * See comment at end of main() for info on the last rites.
1219 exit(0);
1222 if (zargp == NULL) {
1223 (void) door_return(NULL, 0, 0, 0);
1226 rvalp = alloca(rlen);
1227 bzero(rvalp, rlen);
1228 zlog.logfile = NULL;
1229 zlog.buflen = zlog.loglen = rlen - sizeof (zone_cmd_rval_t) + 1;
1230 zlog.buf = rvalp->errbuf;
1231 zlog.log = zlog.buf;
1232 /* defer initialization of zlog.locale until after credential check */
1233 zlogp = &zlog;
1235 if (alen != sizeof (zone_cmd_arg_t)) {
1237 * This really shouldn't be happening.
1239 zerror(&logsys, B_FALSE, "argument size (%d bytes) "
1240 "unexpected (expected %d bytes)", alen,
1241 sizeof (zone_cmd_arg_t));
1242 goto out;
1244 cmd = zargp->cmd;
1246 if (door_ucred(&uc) != 0) {
1247 zerror(&logsys, B_TRUE, "door_ucred");
1248 goto out;
1250 eset = ucred_getprivset(uc, PRIV_EFFECTIVE);
1251 if (ucred_getzoneid(uc) != GLOBAL_ZONEID ||
1252 (eset != NULL ? !priv_ismember(eset, PRIV_SYS_CONFIG) :
1253 ucred_geteuid(uc) != 0)) {
1254 zerror(&logsys, B_FALSE, "insufficient privileges");
1255 goto out;
1258 kernelcall = ucred_getpid(uc) == 0;
1261 * This is safe because we only use a zlog_t throughout the
1262 * duration of a door call; i.e., by the time the pointer
1263 * might become invalid, the door call would be over.
1265 zlog.locale = kernelcall ? DEFAULT_LOCALE : zargp->locale;
1267 (void) mutex_lock(&lock);
1270 * Once we start to really die off, we don't want more connections.
1272 if (in_death_throes) {
1273 (void) mutex_unlock(&lock);
1274 ucred_free(uc);
1275 (void) door_return(NULL, 0, 0, 0);
1276 thr_exit(NULL);
1280 * Check for validity of command.
1282 if (cmd != Z_READY && cmd != Z_BOOT && cmd != Z_FORCEBOOT &&
1283 cmd != Z_REBOOT && cmd != Z_SHUTDOWN && cmd != Z_HALT &&
1284 cmd != Z_NOTE_UNINSTALLING && cmd != Z_MOUNT &&
1285 cmd != Z_FORCEMOUNT && cmd != Z_UNMOUNT) {
1286 zerror(&logsys, B_FALSE, "invalid command %d", (int)cmd);
1287 goto out;
1290 if (kernelcall && (cmd != Z_HALT && cmd != Z_REBOOT)) {
1292 * Can't happen
1294 zerror(&logsys, B_FALSE, "received unexpected kernel upcall %d",
1295 cmd);
1296 goto out;
1299 * We ignore the possibility of someone calling zone_create(2)
1300 * explicitly; all requests must come through zoneadmd.
1302 if (zone_get_state(zone_name, &zstate) != Z_OK) {
1304 * Something terribly wrong happened
1306 zerror(&logsys, B_FALSE, "unable to determine state of zone");
1307 goto out;
1310 if (kernelcall) {
1312 * Kernel-initiated requests may lose their validity if the
1313 * zone_t the kernel was referring to has gone away.
1315 if ((zoneid = getzoneidbyname(zone_name)) == -1 ||
1316 zone_getattr(zoneid, ZONE_ATTR_UNIQID, &uniqid,
1317 sizeof (uniqid)) == -1 || uniqid != zargp->uniqid) {
1319 * We're not talking about the same zone. The request
1320 * must have arrived too late. Return error.
1322 rval = -1;
1323 goto out;
1325 zlogp = &logsys; /* Log errors to syslog */
1329 * If we are being asked to forcibly mount or boot a zone, we
1330 * pretend that an INCOMPLETE zone is actually INSTALLED.
1332 if (zstate == ZONE_STATE_INCOMPLETE &&
1333 (cmd == Z_FORCEBOOT || cmd == Z_FORCEMOUNT))
1334 zstate = ZONE_STATE_INSTALLED;
1336 switch (zstate) {
1337 case ZONE_STATE_CONFIGURED:
1338 case ZONE_STATE_INCOMPLETE:
1340 * Not our area of expertise; we just print a nice message
1341 * and die off.
1343 zerror(zlogp, B_FALSE,
1344 "%s operation is invalid for zones in state '%s'",
1345 z_cmd_name(cmd), zone_state_str(zstate));
1346 break;
1348 case ZONE_STATE_INSTALLED:
1349 switch (cmd) {
1350 case Z_READY:
1351 rval = zone_ready(zlogp, Z_MNT_BOOT, zstate);
1352 if (rval == 0)
1353 eventstream_write(Z_EVT_ZONE_READIED);
1354 break;
1355 case Z_BOOT:
1356 case Z_FORCEBOOT:
1357 eventstream_write(Z_EVT_ZONE_BOOTING);
1358 if ((rval = zone_ready(zlogp, Z_MNT_BOOT, zstate))
1359 == 0) {
1360 rval = zone_bootup(zlogp, zargp->bootbuf,
1361 zstate);
1363 audit_put_record(zlogp, uc, rval, "boot");
1364 if (rval != 0) {
1365 bringup_failure_recovery = B_TRUE;
1366 (void) zone_halt(zlogp, B_FALSE, B_FALSE,
1367 zstate);
1368 eventstream_write(Z_EVT_ZONE_BOOTFAILED);
1370 break;
1371 case Z_SHUTDOWN:
1372 case Z_HALT:
1373 if (kernelcall) /* Invalid; can't happen */
1374 abort();
1376 * We could have two clients racing to halt this
1377 * zone; the second client loses, but its request
1378 * doesn't fail, since the zone is now in the desired
1379 * state.
1381 zerror(zlogp, B_FALSE, "zone is already halted");
1382 rval = 0;
1383 break;
1384 case Z_REBOOT:
1385 if (kernelcall) /* Invalid; can't happen */
1386 abort();
1387 zerror(zlogp, B_FALSE, "%s operation is invalid "
1388 "for zones in state '%s'", z_cmd_name(cmd),
1389 zone_state_str(zstate));
1390 rval = -1;
1391 break;
1392 case Z_NOTE_UNINSTALLING:
1393 if (kernelcall) /* Invalid; can't happen */
1394 abort();
1396 * Tell the console to print out a message about this.
1397 * Once it does, we will be in_death_throes.
1399 eventstream_write(Z_EVT_ZONE_UNINSTALLING);
1400 break;
1401 case Z_MOUNT:
1402 case Z_FORCEMOUNT:
1403 if (kernelcall) /* Invalid; can't happen */
1404 abort();
1405 if (!zone_isnative && !zone_iscluster &&
1406 !zone_islabeled) {
1408 * -U mounts the zone without lofs mounting
1409 * zone file systems back into the scratch
1410 * zone. This is required when mounting
1411 * non-native branded zones.
1413 (void) strlcpy(zargp->bootbuf, "-U",
1414 BOOTARGS_MAX);
1417 rval = zone_ready(zlogp,
1418 strcmp(zargp->bootbuf, "-U") == 0 ?
1419 Z_MNT_UPDATE : Z_MNT_SCRATCH, zstate);
1420 if (rval != 0)
1421 break;
1423 eventstream_write(Z_EVT_ZONE_READIED);
1426 * Get a handle to the default brand info.
1427 * We must always use the default brand file system
1428 * list when mounting the zone.
1430 if ((bh = brand_open(default_brand)) == NULL) {
1431 rval = -1;
1432 break;
1436 * Get the list of filesystems to mount from
1437 * the brand configuration. These mounts are done
1438 * via a thread that will enter the zone, so they
1439 * are done from within the context of the zone.
1441 cb.zlogp = zlogp;
1442 cb.zoneid = zone_id;
1443 cb.mount_cmd = B_TRUE;
1444 rval = brand_platform_iter_mounts(bh,
1445 mount_early_fs, &cb);
1447 brand_close(bh);
1450 * Ordinarily, /dev/fd would be mounted inside the zone
1451 * by svc:/system/filesystem/usr:default, but since
1452 * we're not booting the zone, we need to do this
1453 * manually.
1455 if (rval == 0)
1456 rval = mount_early_fs(&cb,
1457 "fd", "/dev/fd", "fd", NULL);
1458 break;
1459 case Z_UNMOUNT:
1460 if (kernelcall) /* Invalid; can't happen */
1461 abort();
1462 zerror(zlogp, B_FALSE, "zone is already unmounted");
1463 rval = 0;
1464 break;
1466 break;
1468 case ZONE_STATE_READY:
1469 switch (cmd) {
1470 case Z_READY:
1472 * We could have two clients racing to ready this
1473 * zone; the second client loses, but its request
1474 * doesn't fail, since the zone is now in the desired
1475 * state.
1477 zerror(zlogp, B_FALSE, "zone is already ready");
1478 rval = 0;
1479 break;
1480 case Z_BOOT:
1481 (void) strlcpy(boot_args, zargp->bootbuf,
1482 sizeof (boot_args));
1483 eventstream_write(Z_EVT_ZONE_BOOTING);
1484 rval = zone_bootup(zlogp, zargp->bootbuf, zstate);
1485 audit_put_record(zlogp, uc, rval, "boot");
1486 if (rval != 0) {
1487 bringup_failure_recovery = B_TRUE;
1488 (void) zone_halt(zlogp, B_FALSE, B_TRUE,
1489 zstate);
1490 eventstream_write(Z_EVT_ZONE_BOOTFAILED);
1492 boot_args[0] = '\0';
1493 break;
1494 case Z_HALT:
1495 if (kernelcall) /* Invalid; can't happen */
1496 abort();
1497 if ((rval = zone_halt(zlogp, B_FALSE, B_FALSE, zstate))
1498 != 0)
1499 break;
1500 eventstream_write(Z_EVT_ZONE_HALTED);
1501 break;
1502 case Z_SHUTDOWN:
1503 case Z_REBOOT:
1504 case Z_NOTE_UNINSTALLING:
1505 case Z_MOUNT:
1506 case Z_UNMOUNT:
1507 if (kernelcall) /* Invalid; can't happen */
1508 abort();
1509 zerror(zlogp, B_FALSE, "%s operation is invalid "
1510 "for zones in state '%s'", z_cmd_name(cmd),
1511 zone_state_str(zstate));
1512 rval = -1;
1513 break;
1515 break;
1517 case ZONE_STATE_MOUNTED:
1518 switch (cmd) {
1519 case Z_UNMOUNT:
1520 if (kernelcall) /* Invalid; can't happen */
1521 abort();
1522 rval = zone_halt(zlogp, B_TRUE, B_FALSE, zstate);
1523 if (rval == 0) {
1524 eventstream_write(Z_EVT_ZONE_HALTED);
1525 (void) sema_post(&scratch_sem);
1527 break;
1528 default:
1529 if (kernelcall) /* Invalid; can't happen */
1530 abort();
1531 zerror(zlogp, B_FALSE, "%s operation is invalid "
1532 "for zones in state '%s'", z_cmd_name(cmd),
1533 zone_state_str(zstate));
1534 rval = -1;
1535 break;
1537 break;
1539 case ZONE_STATE_RUNNING:
1540 case ZONE_STATE_SHUTTING_DOWN:
1541 case ZONE_STATE_DOWN:
1542 switch (cmd) {
1543 case Z_READY:
1544 if ((rval = zone_halt(zlogp, B_FALSE, B_TRUE, zstate))
1545 != 0)
1546 break;
1547 if ((rval = zone_ready(zlogp, Z_MNT_BOOT, zstate)) == 0)
1548 eventstream_write(Z_EVT_ZONE_READIED);
1549 else
1550 eventstream_write(Z_EVT_ZONE_HALTED);
1551 break;
1552 case Z_BOOT:
1554 * We could have two clients racing to boot this
1555 * zone; the second client loses, but its request
1556 * doesn't fail, since the zone is now in the desired
1557 * state.
1559 zerror(zlogp, B_FALSE, "zone is already booted");
1560 rval = 0;
1561 break;
1562 case Z_HALT:
1563 if ((rval = zone_halt(zlogp, B_FALSE, B_FALSE, zstate))
1564 != 0)
1565 break;
1566 eventstream_write(Z_EVT_ZONE_HALTED);
1567 break;
1568 case Z_REBOOT:
1569 (void) strlcpy(boot_args, zargp->bootbuf,
1570 sizeof (boot_args));
1571 eventstream_write(Z_EVT_ZONE_REBOOTING);
1572 if ((rval = zone_halt(zlogp, B_FALSE, B_TRUE, zstate))
1573 != 0) {
1574 eventstream_write(Z_EVT_ZONE_BOOTFAILED);
1575 boot_args[0] = '\0';
1576 break;
1578 if ((rval = zone_ready(zlogp, Z_MNT_BOOT, zstate))
1579 != 0) {
1580 eventstream_write(Z_EVT_ZONE_BOOTFAILED);
1581 boot_args[0] = '\0';
1582 break;
1584 rval = zone_bootup(zlogp, zargp->bootbuf, zstate);
1585 audit_put_record(zlogp, uc, rval, "reboot");
1586 if (rval != 0) {
1587 (void) zone_halt(zlogp, B_FALSE, B_TRUE,
1588 zstate);
1589 eventstream_write(Z_EVT_ZONE_BOOTFAILED);
1591 boot_args[0] = '\0';
1592 break;
1593 case Z_SHUTDOWN:
1594 if ((rval = zone_graceful_shutdown(zlogp)) == 0) {
1595 wait_shut = B_TRUE;
1597 break;
1598 case Z_NOTE_UNINSTALLING:
1599 case Z_MOUNT:
1600 case Z_UNMOUNT:
1601 zerror(zlogp, B_FALSE, "%s operation is invalid "
1602 "for zones in state '%s'", z_cmd_name(cmd),
1603 zone_state_str(zstate));
1604 rval = -1;
1605 break;
1607 break;
1608 default:
1609 abort();
1613 * Because the state of the zone may have changed, we make sure
1614 * to wake the console poller, which is in charge of initiating
1615 * the shutdown procedure as necessary.
1617 eventstream_write(Z_EVT_NULL);
1619 out:
1620 (void) mutex_unlock(&lock);
1622 /* Wait for the Z_SHUTDOWN commands to complete */
1623 if (wait_shut)
1624 rval = zone_wait_shutdown(zlogp);
1626 if (kernelcall) {
1627 rvalp = NULL;
1628 rlen = 0;
1629 } else {
1630 rvalp->rval = rval;
1632 if (uc != NULL)
1633 ucred_free(uc);
1634 (void) door_return((char *)rvalp, rlen, NULL, 0);
1635 thr_exit(NULL);
1638 static int
1639 setup_door(zlog_t *zlogp)
1641 if ((zone_door = door_create(server, NULL,
1642 DOOR_UNREF | DOOR_REFUSE_DESC | DOOR_NO_CANCEL)) < 0) {
1643 zerror(zlogp, B_TRUE, "%s failed", "door_create");
1644 return (-1);
1646 (void) fdetach(zone_door_path);
1648 if (fattach(zone_door, zone_door_path) != 0) {
1649 zerror(zlogp, B_TRUE, "fattach to %s failed", zone_door_path);
1650 (void) door_revoke(zone_door);
1651 (void) fdetach(zone_door_path);
1652 zone_door = -1;
1653 return (-1);
1655 return (0);
1659 * zoneadm(1m) will start zoneadmd if it thinks it isn't running; this
1660 * is where zoneadmd itself will check to see that another instance of
1661 * zoneadmd isn't already controlling this zone.
1663 * The idea here is that we want to open the path to which we will
1664 * attach our door, lock it, and then make sure that no-one has beat us
1665 * to fattach(3c)ing onto it.
1667 * fattach(3c) is really a mount, so there are actually two possible
1668 * vnodes we could be dealing with. Our strategy is as follows:
1670 * - If the file we opened is a regular file (common case):
1671 * There is no fattach(3c)ed door, so we have a chance of becoming
1672 * the managing zoneadmd. We attempt to lock the file: if it is
1673 * already locked, that means someone else raced us here, so we
1674 * lose and give up. zoneadm(1m) will try to contact the zoneadmd
1675 * that beat us to it.
1677 * - If the file we opened is a namefs file:
1678 * This means there is already an established door fattach(3c)'ed
1679 * to the rendezvous path. We've lost the race, so we give up.
1680 * Note that in this case we also try to grab the file lock, and
1681 * will succeed in acquiring it since the vnode locked by the
1682 * "winning" zoneadmd was a regular one, and the one we locked was
1683 * the fattach(3c)'ed door node. At any rate, no harm is done, and
1684 * we just return to zoneadm(1m) which knows to retry.
1686 static int
1687 make_daemon_exclusive(zlog_t *zlogp)
1689 int doorfd = -1;
1690 int err, ret = -1;
1691 struct stat st;
1692 struct flock flock;
1693 zone_state_t zstate;
1695 top:
1696 if ((err = zone_get_state(zone_name, &zstate)) != Z_OK) {
1697 zerror(zlogp, B_FALSE, "failed to get zone state: %s",
1698 zonecfg_strerror(err));
1699 goto out;
1701 if ((doorfd = open(zone_door_path, O_CREAT|O_RDWR,
1702 S_IREAD|S_IWRITE)) < 0) {
1703 zerror(zlogp, B_TRUE, "failed to open %s", zone_door_path);
1704 goto out;
1706 if (fstat(doorfd, &st) < 0) {
1707 zerror(zlogp, B_TRUE, "failed to stat %s", zone_door_path);
1708 goto out;
1711 * Lock the file to synchronize with other zoneadmd
1713 flock.l_type = F_WRLCK;
1714 flock.l_whence = SEEK_SET;
1715 flock.l_start = (off_t)0;
1716 flock.l_len = (off_t)0;
1717 if (fcntl(doorfd, F_SETLK, &flock) < 0) {
1719 * Someone else raced us here and grabbed the lock file
1720 * first. A warning here is inappropriate since nothing
1721 * went wrong.
1723 goto out;
1726 if (strcmp(st.st_fstype, "namefs") == 0) {
1727 struct door_info info;
1730 * There is already something fattach()'ed to this file.
1731 * Lets see what the door is up to.
1733 if (door_info(doorfd, &info) == 0 && info.di_target != -1) {
1735 * Another zoneadmd process seems to be in
1736 * control of the situation and we don't need to
1737 * be here. A warning here is inappropriate
1738 * since nothing went wrong.
1740 * If the door has been revoked, the zoneadmd
1741 * process currently managing the zone is going
1742 * away. We'll return control to zoneadm(1m)
1743 * which will try again (by which time zoneadmd
1744 * will hopefully have exited).
1746 goto out;
1750 * If we got this far, there's a fattach(3c)'ed door
1751 * that belongs to a process that has exited, which can
1752 * happen if the previous zoneadmd died unexpectedly.
1754 * Let user know that something is amiss, but that we can
1755 * recover; if the zone is in the installed state, then don't
1756 * message, since having a running zoneadmd isn't really
1757 * expected/needed. We want to keep occurences of this message
1758 * limited to times when zoneadmd is picking back up from a
1759 * zoneadmd that died while the zone was in some non-trivial
1760 * state.
1762 if (zstate > ZONE_STATE_INSTALLED) {
1763 zerror(zlogp, B_FALSE,
1764 "zone '%s': WARNING: zone is in state '%s', but "
1765 "zoneadmd does not appear to be available; "
1766 "restarted zoneadmd to recover.",
1767 zone_name, zone_state_str(zstate));
1770 (void) fdetach(zone_door_path);
1771 (void) close(doorfd);
1772 goto top;
1774 ret = 0;
1775 out:
1776 (void) close(doorfd);
1777 return (ret);
1781 * Setup the brand's pre and post state change callbacks, as well as the
1782 * query callback, if any of these exist.
1784 static int
1785 brand_callback_init(brand_handle_t bh, char *zone_name)
1787 char zpath[MAXPATHLEN];
1789 if (zone_get_zonepath(zone_name, zpath, sizeof (zpath)) != Z_OK)
1790 return (-1);
1792 (void) strlcpy(pre_statechg_hook, EXEC_PREFIX,
1793 sizeof (pre_statechg_hook));
1795 if (brand_get_prestatechange(bh, zone_name, zpath,
1796 pre_statechg_hook + EXEC_LEN,
1797 sizeof (pre_statechg_hook) - EXEC_LEN) != 0)
1798 return (-1);
1800 if (strlen(pre_statechg_hook) <= EXEC_LEN)
1801 pre_statechg_hook[0] = '\0';
1803 (void) strlcpy(post_statechg_hook, EXEC_PREFIX,
1804 sizeof (post_statechg_hook));
1806 if (brand_get_poststatechange(bh, zone_name, zpath,
1807 post_statechg_hook + EXEC_LEN,
1808 sizeof (post_statechg_hook) - EXEC_LEN) != 0)
1809 return (-1);
1811 if (strlen(post_statechg_hook) <= EXEC_LEN)
1812 post_statechg_hook[0] = '\0';
1814 (void) strlcpy(query_hook, EXEC_PREFIX,
1815 sizeof (query_hook));
1817 if (brand_get_query(bh, zone_name, zpath, query_hook + EXEC_LEN,
1818 sizeof (query_hook) - EXEC_LEN) != 0)
1819 return (-1);
1821 if (strlen(query_hook) <= EXEC_LEN)
1822 query_hook[0] = '\0';
1824 return (0);
1828 main(int argc, char *argv[])
1830 int opt;
1831 zoneid_t zid;
1832 priv_set_t *privset;
1833 zone_state_t zstate;
1834 char parents_locale[MAXPATHLEN];
1835 brand_handle_t bh;
1836 int err;
1838 pid_t pid;
1839 sigset_t blockset;
1840 sigset_t block_cld;
1842 struct {
1843 sema_t sem;
1844 int status;
1845 zlog_t log;
1846 } *shstate;
1847 size_t shstatelen = getpagesize();
1849 zlog_t errlog;
1850 zlog_t *zlogp;
1852 int ctfd;
1854 progname = get_execbasename(argv[0]);
1857 * Make sure stderr is unbuffered
1859 (void) setbuffer(stderr, NULL, 0);
1862 * Get out of the way of mounted filesystems, since we will daemonize
1863 * soon.
1865 (void) chdir("/");
1868 * Use the default system umask per PSARC 1998/110 rather than
1869 * anything that may have been set by the caller.
1871 (void) umask(CMASK);
1874 * Initially we want to use our parent's locale.
1876 (void) setlocale(LC_ALL, "");
1877 (void) textdomain(TEXT_DOMAIN);
1878 (void) strlcpy(parents_locale, setlocale(LC_MESSAGES, NULL),
1879 sizeof (parents_locale));
1882 * This zlog_t is used for writing to stderr
1884 errlog.logfile = stderr;
1885 errlog.buflen = errlog.loglen = 0;
1886 errlog.buf = errlog.log = NULL;
1887 errlog.locale = parents_locale;
1890 * We start off writing to stderr until we're ready to daemonize.
1892 zlogp = &errlog;
1895 * Process options.
1897 while ((opt = getopt(argc, argv, "R:z:")) != EOF) {
1898 switch (opt) {
1899 case 'R':
1900 zonecfg_set_root(optarg);
1901 break;
1902 case 'z':
1903 zone_name = optarg;
1904 break;
1905 default:
1906 usage();
1910 if (zone_name == NULL)
1911 usage();
1914 * Because usage() prints directly to stderr, it has gettext()
1915 * wrapping, which depends on the locale. But since zerror() calls
1916 * localize() which tweaks the locale, it is not safe to call zerror()
1917 * until after the last call to usage(). Fortunately, the last call
1918 * to usage() is just above and the first call to zerror() is just
1919 * below. Don't mess this up.
1921 if (strcmp(zone_name, GLOBAL_ZONENAME) == 0) {
1922 zerror(zlogp, B_FALSE, "cannot manage the %s zone",
1923 GLOBAL_ZONENAME);
1924 return (1);
1927 if (zone_get_id(zone_name, &zid) != 0) {
1928 zerror(zlogp, B_FALSE, "could not manage %s: %s", zone_name,
1929 zonecfg_strerror(Z_NO_ZONE));
1930 return (1);
1933 if ((err = zone_get_state(zone_name, &zstate)) != Z_OK) {
1934 zerror(zlogp, B_FALSE, "failed to get zone state: %s",
1935 zonecfg_strerror(err));
1936 return (1);
1938 if (zstate < ZONE_STATE_INCOMPLETE) {
1939 zerror(zlogp, B_FALSE,
1940 "cannot manage a zone which is in state '%s'",
1941 zone_state_str(zstate));
1942 return (1);
1945 if (zonecfg_default_brand(default_brand,
1946 sizeof (default_brand)) != Z_OK) {
1947 zerror(zlogp, B_FALSE, "unable to determine default brand");
1948 return (1);
1951 /* Get a handle to the brand info for this zone */
1952 if (zone_get_brand(zone_name, brand_name, sizeof (brand_name))
1953 != Z_OK) {
1954 zerror(zlogp, B_FALSE, "unable to determine zone brand");
1955 return (1);
1957 zone_isnative = (strcmp(brand_name, NATIVE_BRAND_NAME) == 0);
1958 zone_islabeled = (strcmp(brand_name, LABELED_BRAND_NAME) == 0);
1961 * In the alternate root environment, the only supported
1962 * operations are mount and unmount. In this case, just treat
1963 * the zone as native if it is cluster. Cluster zones can be
1964 * native for the purpose of LU or upgrade, and the cluster
1965 * brand may not exist in the miniroot (such as in net install
1966 * upgrade).
1968 if (strcmp(brand_name, CLUSTER_BRAND_NAME) == 0) {
1969 zone_iscluster = B_TRUE;
1970 if (zonecfg_in_alt_root()) {
1971 (void) strlcpy(brand_name, default_brand,
1972 sizeof (brand_name));
1974 } else {
1975 zone_iscluster = B_FALSE;
1978 if ((bh = brand_open(brand_name)) == NULL) {
1979 zerror(zlogp, B_FALSE, "unable to open zone brand");
1980 return (1);
1983 /* Get state change brand hooks. */
1984 if (brand_callback_init(bh, zone_name) == -1) {
1985 zerror(zlogp, B_TRUE,
1986 "failed to initialize brand state change hooks");
1987 brand_close(bh);
1988 return (1);
1991 brand_close(bh);
1994 * Check that we have all privileges. It would be nice to pare
1995 * this down, but this is at least a first cut.
1997 if ((privset = priv_allocset()) == NULL) {
1998 zerror(zlogp, B_TRUE, "%s failed", "priv_allocset");
1999 return (1);
2002 if (getppriv(PRIV_EFFECTIVE, privset) != 0) {
2003 zerror(zlogp, B_TRUE, "%s failed", "getppriv");
2004 priv_freeset(privset);
2005 return (1);
2008 if (priv_isfullset(privset) == B_FALSE) {
2009 zerror(zlogp, B_FALSE, "You lack sufficient privilege to "
2010 "run this command (all privs required)");
2011 priv_freeset(privset);
2012 return (1);
2014 priv_freeset(privset);
2016 if (mkzonedir(zlogp) != 0)
2017 return (1);
2020 * Pre-fork: setup shared state
2022 if ((shstate = (void *)mmap(NULL, shstatelen,
2023 PROT_READ|PROT_WRITE, MAP_SHARED|MAP_ANON, -1, (off_t)0)) ==
2024 MAP_FAILED) {
2025 zerror(zlogp, B_TRUE, "%s failed", "mmap");
2026 return (1);
2028 if (sema_init(&shstate->sem, 0, USYNC_PROCESS, NULL) != 0) {
2029 zerror(zlogp, B_TRUE, "%s failed", "sema_init()");
2030 (void) munmap((char *)shstate, shstatelen);
2031 return (1);
2033 shstate->log.logfile = NULL;
2034 shstate->log.buflen = shstatelen - sizeof (*shstate);
2035 shstate->log.loglen = shstate->log.buflen;
2036 shstate->log.buf = (char *)shstate + sizeof (*shstate);
2037 shstate->log.log = shstate->log.buf;
2038 shstate->log.locale = parents_locale;
2039 shstate->status = -1;
2042 * We need a SIGCHLD handler so the sema_wait() below will wake
2043 * up if the child dies without doing a sema_post().
2045 (void) sigset(SIGCHLD, sigchld);
2047 * We must mask SIGCHLD until after we've coped with the fork
2048 * sufficiently to deal with it; otherwise we can race and
2049 * receive the signal before pid has been initialized
2050 * (yes, this really happens).
2052 (void) sigemptyset(&block_cld);
2053 (void) sigaddset(&block_cld, SIGCHLD);
2054 (void) sigprocmask(SIG_BLOCK, &block_cld, NULL);
2057 * The parent only needs stderr after the fork, so close other fd's
2058 * that we inherited from zoneadm so that the parent doesn't have those
2059 * open while waiting. The child will close the rest after the fork.
2061 closefrom(3);
2063 if ((ctfd = init_template()) == -1) {
2064 zerror(zlogp, B_TRUE, "failed to create contract");
2065 return (1);
2069 * Do not let another thread localize a message while we are forking.
2071 (void) mutex_lock(&msglock);
2072 pid = fork();
2073 (void) mutex_unlock(&msglock);
2076 * In all cases (parent, child, and in the event of an error) we
2077 * don't want to cause creation of contracts on subsequent fork()s.
2079 (void) ct_tmpl_clear(ctfd);
2080 (void) close(ctfd);
2082 if (pid == -1) {
2083 zerror(zlogp, B_TRUE, "could not fork");
2084 return (1);
2086 } else if (pid > 0) { /* parent */
2087 (void) sigprocmask(SIG_UNBLOCK, &block_cld, NULL);
2089 * This marks a window of vulnerability in which we receive
2090 * the SIGCLD before falling into sema_wait (normally we would
2091 * get woken up from sema_wait with EINTR upon receipt of
2092 * SIGCLD). So we may need to use some other scheme like
2093 * sema_posting in the sigcld handler.
2094 * blech
2096 (void) sema_wait(&shstate->sem);
2097 (void) sema_destroy(&shstate->sem);
2098 if (shstate->status != 0)
2099 (void) waitpid(pid, NULL, WNOHANG);
2101 * It's ok if we die with SIGPIPE. It's not like we could have
2102 * done anything about it.
2104 (void) fprintf(stderr, "%s", shstate->log.buf);
2105 _exit(shstate->status == 0 ? 0 : 1);
2109 * The child charges on.
2111 (void) sigset(SIGCHLD, SIG_DFL);
2112 (void) sigprocmask(SIG_UNBLOCK, &block_cld, NULL);
2115 * SIGPIPE can be delivered if we write to a socket for which the
2116 * peer endpoint is gone. That can lead to too-early termination
2117 * of zoneadmd, and that's not good eats.
2119 (void) sigset(SIGPIPE, SIG_IGN);
2121 * Stop using stderr
2123 zlogp = &shstate->log;
2126 * We don't need stdout/stderr from now on.
2128 closefrom(0);
2131 * Initialize the syslog zlog_t. This needs to be done after
2132 * the call to closefrom().
2134 logsys.buf = logsys.log = NULL;
2135 logsys.buflen = logsys.loglen = 0;
2136 logsys.logfile = NULL;
2137 logsys.locale = DEFAULT_LOCALE;
2139 openlog("zoneadmd", LOG_PID, LOG_DAEMON);
2142 * The eventstream is used to publish state changes in the zone
2143 * from the door threads to the console I/O poller.
2145 if (eventstream_init() == -1) {
2146 zerror(zlogp, B_TRUE, "unable to create eventstream");
2147 goto child_out;
2150 (void) snprintf(zone_door_path, sizeof (zone_door_path),
2151 "%s" ZONE_DOOR_PATH, zonecfg_get_root(), zone_name);
2154 * See if another zoneadmd is running for this zone. If not, then we
2155 * can now modify system state.
2157 if (make_daemon_exclusive(zlogp) == -1)
2158 goto child_out;
2162 * Create/join a new session; we need to be careful of what we do with
2163 * the console from now on so we don't end up being the session leader
2164 * for the terminal we're going to be handing out.
2166 (void) setsid();
2169 * This thread shouldn't be receiving any signals; in particular,
2170 * SIGCHLD should be received by the thread doing the fork().
2172 (void) sigfillset(&blockset);
2173 (void) thr_sigsetmask(SIG_BLOCK, &blockset, NULL);
2176 * Setup the console device and get ready to serve the console;
2177 * once this has completed, we're ready to let console clients
2178 * make an attempt to connect (they will block until
2179 * serve_console_sock() below gets called, and any pending
2180 * connection is accept()ed).
2182 if (!zonecfg_in_alt_root() && init_console(zlogp) < 0)
2183 goto child_out;
2186 * Take the lock now, so that when the door server gets going, we
2187 * are guaranteed that it won't take a request until we are sure
2188 * that everything is completely set up. See the child_out: label
2189 * below to see why this matters.
2191 (void) mutex_lock(&lock);
2193 /* Init semaphore for scratch zones. */
2194 if (sema_init(&scratch_sem, 0, USYNC_THREAD, NULL) == -1) {
2195 zerror(zlogp, B_TRUE,
2196 "failed to initialize semaphore for scratch zone");
2197 goto child_out;
2200 /* open the dladm handle */
2201 if (dladm_open(&dld_handle) != DLADM_STATUS_OK) {
2202 zerror(zlogp, B_FALSE, "failed to open dladm handle");
2203 goto child_out;
2207 * Note: door setup must occur *after* the console is setup.
2208 * This is so that as zlogin tests the door to see if zoneadmd
2209 * is ready yet, we know that the console will get serviced
2210 * once door_info() indicates that the door is "up".
2212 if (setup_door(zlogp) == -1)
2213 goto child_out;
2216 * Things seem OK so far; tell the parent process that we're done
2217 * with setup tasks. This will cause the parent to exit, signalling
2218 * to zoneadm, zlogin, or whatever forked it that we are ready to
2219 * service requests.
2221 shstate->status = 0;
2222 (void) sema_post(&shstate->sem);
2223 (void) munmap((char *)shstate, shstatelen);
2224 shstate = NULL;
2226 (void) mutex_unlock(&lock);
2229 * zlogp is now invalid, so reset it to the syslog logger.
2231 zlogp = &logsys;
2234 * Now that we are free of any parents, switch to the default locale.
2236 (void) setlocale(LC_ALL, DEFAULT_LOCALE);
2239 * At this point the setup portion of main() is basically done, so
2240 * we reuse this thread to manage the zone console. When
2241 * serve_console() has returned, we are past the point of no return
2242 * in the life of this zoneadmd.
2244 if (zonecfg_in_alt_root()) {
2246 * This is just awful, but mounted scratch zones don't (and
2247 * can't) have consoles. We just wait for unmount instead.
2249 while (sema_wait(&scratch_sem) == EINTR)
2251 } else {
2252 serve_console(zlogp);
2253 assert(in_death_throes);
2257 * This is the next-to-last part of the exit interlock. Upon calling
2258 * fdetach(), the door will go unreferenced; once any
2259 * outstanding requests (like the door thread doing Z_HALT) are
2260 * done, the door will get an UNREF notification; when it handles
2261 * the UNREF, the door server will cause the exit. It's possible
2262 * that fdetach() can fail because the file is in use, in which
2263 * case we'll retry the operation.
2265 assert(!MUTEX_HELD(&lock));
2266 for (;;) {
2267 if ((fdetach(zone_door_path) == 0) || (errno != EBUSY))
2268 break;
2269 yield();
2272 for (;;)
2273 (void) pause();
2275 child_out:
2276 assert(pid == 0);
2277 if (shstate != NULL) {
2278 shstate->status = -1;
2279 (void) sema_post(&shstate->sem);
2280 (void) munmap((char *)shstate, shstatelen);
2284 * This might trigger an unref notification, but if so,
2285 * we are still holding the lock, so our call to exit will
2286 * ultimately win the race and will publish the right exit
2287 * code.
2289 if (zone_door != -1) {
2290 assert(MUTEX_HELD(&lock));
2291 (void) door_revoke(zone_door);
2292 (void) fdetach(zone_door_path);
2295 if (dld_handle != NULL)
2296 dladm_close(dld_handle);
2298 return (1); /* return from main() forcibly exits an MT process */