8322 nl: misleading-indentation

[unleashed/tickless.git] / usr / src / uts / common / rpc / clnt_clts.c

/*
 * CDDL HEADER START
 *
 * The contents of this file are subject to the terms of the
 * Common Development and Distribution License (the "License").
 * You may not use this file except in compliance with the License.
 *
 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
 * or http://www.opensolaris.org/os/licensing.
 * See the License for the specific language governing permissions
 * and limitations under the License.
 *
 * When distributing Covered Code, include this CDDL HEADER in each
 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
 * If applicable, add the following below this CDDL HEADER, with the
 * fields enclosed by brackets "[]" replaced with your own identifying
 * information: Portions Copyright [yyyy] [name of copyright owner]
 *
 * CDDL HEADER END
 */

/*
 * Copyright 2015 Nexenta Systems, Inc.  All rights reserved.
 */

/*
 * Copyright 2009 Sun Microsystems, Inc.  All rights reserved.
 * Use is subject to license terms.
 */

/*
 * Copyright (c) 1983, 1984, 1985, 1986, 1987, 1988, 1989 AT&T
 * All Rights Reserved
 */

/*
 * Portions of this source code were derived from Berkeley 4.3 BSD
 * under license from the Regents of the University of California.
 */


/*
 * Implements a kernel based, client side RPC.
 */

#include <sys/param.h>
#include <sys/types.h>
#include <sys/systm.h>
#include <sys/sysmacros.h>
#include <sys/stream.h>
#include <sys/strsubr.h>
#include <sys/ddi.h>
#include <sys/tiuser.h>
#include <sys/tihdr.h>
#include <sys/t_kuser.h>
#include <sys/errno.h>
#include <sys/kmem.h>
#include <sys/debug.h>
#include <sys/kstat.h>
#include <sys/t_lock.h>
#include <sys/cmn_err.h>
#include <sys/conf.h>
#include <sys/disp.h>
#include <sys/taskq.h>
#include <sys/list.h>
#include <sys/atomic.h>
#include <sys/zone.h>
#include <netinet/in.h>
#include <rpc/types.h>
#include <rpc/xdr.h>
#include <rpc/auth.h>
#include <rpc/clnt.h>
#include <rpc/rpc_msg.h>

#include <sys/sdt.h>

static enum clnt_stat clnt_clts_kcallit(CLIENT *, rpcproc_t, xdrproc_t,
                    caddr_t, xdrproc_t, caddr_t, struct timeval);
static void     clnt_clts_kabort(CLIENT *);
static void     clnt_clts_kerror(CLIENT *, struct rpc_err *);
static bool_t   clnt_clts_kfreeres(CLIENT *, xdrproc_t, caddr_t);
static bool_t   clnt_clts_kcontrol(CLIENT *, int, char *);
static void     clnt_clts_kdestroy(CLIENT *);
static int      clnt_clts_ksettimers(CLIENT *, struct rpc_timers *,
                    struct rpc_timers *, int, void (*)(), caddr_t, uint32_t);

/*
 * Operations vector for CLTS based RPC
 */
static struct clnt_ops clts_ops = {
        clnt_clts_kcallit,      /* do rpc call */
        clnt_clts_kabort,       /* abort call */
        clnt_clts_kerror,       /* return error status */
        clnt_clts_kfreeres,     /* free results */
        clnt_clts_kdestroy,     /* destroy rpc handle */
        clnt_clts_kcontrol,     /* the ioctl() of rpc */
        clnt_clts_ksettimers    /* set retry timers */
};

/*
 * Endpoint for CLTS (INET, INET6, loopback, etc.)
 */
typedef struct endpnt_type {
        struct endpnt_type *e_next;     /* pointer to next endpoint type */
        list_t          e_pool;         /* list of available endpoints */
        list_t          e_ilist;        /* list of idle endpoints */
        struct endpnt   *e_pcurr;       /* pointer to current endpoint */
        char            e_protofmly[KNC_STRSIZE];       /* protocol family */
        dev_t           e_rdev;         /* device */
        kmutex_t        e_plock;        /* pool lock */
        kmutex_t        e_ilock;        /* idle list lock */
        timeout_id_t    e_itimer;       /* timer to dispatch the taskq */
        uint_t          e_cnt;          /* number of endpoints in the pool */
        zoneid_t        e_zoneid;       /* zoneid of endpoint type */
        kcondvar_t      e_async_cv;     /* cv for asynchronous reap threads */
        uint_t          e_async_count;  /* count of asynchronous reap threads */
} endpnt_type_t;

typedef struct endpnt {
        list_node_t     e_node;         /* link to the pool */
        list_node_t     e_idle;         /* link to the idle list */
        endpnt_type_t   *e_type;        /* back pointer to endpoint type */
        TIUSER          *e_tiptr;       /* pointer to transport endpoint */
        queue_t         *e_wq;          /* write queue */
        uint_t          e_flags;        /* endpoint flags */
        uint_t          e_ref;          /* ref count on endpoint */
        kcondvar_t      e_cv;           /* condition variable */
        kmutex_t        e_lock;         /* protects cv and flags */
        time_t          e_itime;        /* time when rele'd */
} endpnt_t;

#define ENDPNT_ESTABLISHED      0x1     /* endpoint is established */
#define ENDPNT_WAITING          0x2     /* thread waiting for endpoint */
#define ENDPNT_BOUND            0x4     /* endpoint is bound */
#define ENDPNT_STALE            0x8     /* endpoint is dead */
#define ENDPNT_ONIDLE           0x10    /* endpoint is on the idle list */

static krwlock_t        endpnt_type_lock; /* protects endpnt_type_list */
static endpnt_type_t    *endpnt_type_list = NULL; /* list of CLTS endpoints */
static struct kmem_cache        *endpnt_cache; /* cache of endpnt_t's */
static taskq_t                  *endpnt_taskq; /* endpnt_t reaper thread */
static bool_t                   taskq_created; /* flag for endpnt_taskq */
static kmutex_t                 endpnt_taskq_lock; /* taskq lock */
static zone_key_t               endpnt_destructor_key;

#define DEFAULT_ENDPOINT_REAP_INTERVAL 60 /* 1 minute */
#define DEFAULT_INTERVAL_SHIFT 30 /* 30 seconds */

/*
 * Endpoint tunables
 */
static int      clnt_clts_max_endpoints = -1;
static int      clnt_clts_hash_size = DEFAULT_HASH_SIZE;
static time_t   clnt_clts_endpoint_reap_interval = -1;
static clock_t  clnt_clts_taskq_dispatch_interval;

/*
 * Response completion hash queue
 */
static call_table_t *clts_call_ht;

/*
 * Routines for the endpoint manager
 */
static struct endpnt_type *endpnt_type_create(struct knetconfig *);
static void endpnt_type_free(struct endpnt_type *);
static int check_endpnt(struct endpnt *, struct endpnt **);
static struct endpnt *endpnt_get(struct knetconfig *, int);
static void endpnt_rele(struct endpnt *);
static void endpnt_reap_settimer(endpnt_type_t *);
static void endpnt_reap(endpnt_type_t *);
static void endpnt_reap_dispatch(void *);
static void endpnt_reclaim(zoneid_t);


/*
 * Request dipatching function.
 */
static int clnt_clts_dispatch_send(queue_t *q, mblk_t *, struct netbuf *addr,
                                        calllist_t *, uint_t, cred_t *);

/*
 * The size of the preserialized RPC header information.
 */
#define CKU_HDRSIZE     20
/*
 * The initial allocation size.  It is small to reduce space requirements.
 */
#define CKU_INITSIZE    2048
/*
 * The size of additional allocations, if required.  It is larger to
 * reduce the number of actual allocations.
 */
#define CKU_ALLOCSIZE   8192

/*
 * Private data per rpc handle.  This structure is allocated by
 * clnt_clts_kcreate, and freed by clnt_clts_kdestroy.
 */
struct cku_private {
        CLIENT                   cku_client;    /* client handle */
        int                      cku_retrys;    /* request retrys */
        calllist_t               cku_call;
        struct endpnt           *cku_endpnt;    /* open end point */
        struct knetconfig        cku_config;
        struct netbuf            cku_addr;      /* remote address */
        struct rpc_err           cku_err;       /* error status */
        XDR                      cku_outxdr;    /* xdr stream for output */
        XDR                      cku_inxdr;     /* xdr stream for input */
        char                     cku_rpchdr[CKU_HDRSIZE + 4]; /* rpc header */
        struct cred             *cku_cred;      /* credentials */
        struct rpc_timers       *cku_timers;    /* for estimating RTT */
        struct rpc_timers       *cku_timeall;   /* for estimating RTT */
        void                     (*cku_feedback)(int, int, caddr_t);
                                                /* ptr to feedback rtn */
        caddr_t                  cku_feedarg;   /* argument for feedback func */
        uint32_t                 cku_xid;       /* current XID */
        bool_t                   cku_bcast;     /* RPC broadcast hint */
        int                     cku_useresvport; /* Use reserved port */
        struct rpc_clts_client  *cku_stats;     /* counters for the zone */
};

static const struct rpc_clts_client {
        kstat_named_t   rccalls;
        kstat_named_t   rcbadcalls;
        kstat_named_t   rcretrans;
        kstat_named_t   rcbadxids;
        kstat_named_t   rctimeouts;
        kstat_named_t   rcnewcreds;
        kstat_named_t   rcbadverfs;
        kstat_named_t   rctimers;
        kstat_named_t   rcnomem;
        kstat_named_t   rccantsend;
} clts_rcstat_tmpl = {
        { "calls",      KSTAT_DATA_UINT64 },
        { "badcalls",   KSTAT_DATA_UINT64 },
        { "retrans",    KSTAT_DATA_UINT64 },
        { "badxids",    KSTAT_DATA_UINT64 },
        { "timeouts",   KSTAT_DATA_UINT64 },
        { "newcreds",   KSTAT_DATA_UINT64 },
        { "badverfs",   KSTAT_DATA_UINT64 },
        { "timers",     KSTAT_DATA_UINT64 },
        { "nomem",      KSTAT_DATA_UINT64 },
        { "cantsend",   KSTAT_DATA_UINT64 },
};

static uint_t clts_rcstat_ndata =
        sizeof (clts_rcstat_tmpl) / sizeof (kstat_named_t);

#define RCSTAT_INCR(s, x)                       \
        atomic_inc_64(&(s)->x.value.ui64)

#define ptoh(p)         (&((p)->cku_client))
#define htop(h)         ((struct cku_private *)((h)->cl_private))

/*
 * Times to retry
 */
#define SNDTRIES        4
#define REFRESHES       2       /* authentication refreshes */

/*
 * The following is used to determine the global default behavior for
 * CLTS when binding to a local port.
 *
 * If the value is set to 1 the default will be to select a reserved
 * (aka privileged) port, if the value is zero the default will be to
 * use non-reserved ports.  Users of kRPC may override this by using
 * CLNT_CONTROL() and CLSET_BINDRESVPORT.
 */
static int clnt_clts_do_bindresvport = 1;

#define BINDRESVPORT_RETRIES 5

void
clnt_clts_stats_init(zoneid_t zoneid, struct rpc_clts_client **statsp)
{
        kstat_t *ksp;
        kstat_named_t *knp;

        knp = rpcstat_zone_init_common(zoneid, "unix", "rpc_clts_client",
            (const kstat_named_t *)&clts_rcstat_tmpl,
            sizeof (clts_rcstat_tmpl));
        /*
         * Backwards compatibility for old kstat clients
         */
        ksp = kstat_create_zone("unix", 0, "rpc_client", "rpc",
            KSTAT_TYPE_NAMED, clts_rcstat_ndata,
            KSTAT_FLAG_VIRTUAL | KSTAT_FLAG_WRITABLE, zoneid);
        if (ksp) {
                ksp->ks_data = knp;
                kstat_install(ksp);
        }
        *statsp = (struct rpc_clts_client *)knp;
}

void
clnt_clts_stats_fini(zoneid_t zoneid, struct rpc_clts_client **statsp)
{
        rpcstat_zone_fini_common(zoneid, "unix", "rpc_clts_client");
        kstat_delete_byname_zone("unix", 0, "rpc_client", zoneid);
        kmem_free(*statsp, sizeof (clts_rcstat_tmpl));
}

/*
 * Create an rpc handle for a clts rpc connection.
 * Allocates space for the handle structure and the private data.
 */
/* ARGSUSED */
int
clnt_clts_kcreate(struct knetconfig *config, struct netbuf *addr,
        rpcprog_t pgm, rpcvers_t vers, int retrys, struct cred *cred,
        CLIENT **cl)
{
        CLIENT *h;
        struct cku_private *p;
        struct rpc_msg call_msg;
        int error;
        int plen;

        if (cl == NULL)
                return (EINVAL);

        *cl = NULL;
        error = 0;

        p = kmem_zalloc(sizeof (*p), KM_SLEEP);

        h = ptoh(p);

        /* handle */
        h->cl_ops = &clts_ops;
        h->cl_private = (caddr_t)p;
        h->cl_auth = authkern_create();

        /* call message, just used to pre-serialize below */
        call_msg.rm_xid = 0;
        call_msg.rm_direction = CALL;
        call_msg.rm_call.cb_rpcvers = RPC_MSG_VERSION;
        call_msg.rm_call.cb_prog = pgm;
        call_msg.rm_call.cb_vers = vers;

        /* private */
        clnt_clts_kinit(h, addr, retrys, cred);

        xdrmem_create(&p->cku_outxdr, p->cku_rpchdr, CKU_HDRSIZE, XDR_ENCODE);

        /* pre-serialize call message header */
        if (!xdr_callhdr(&p->cku_outxdr, &call_msg)) {
                XDR_DESTROY(&p->cku_outxdr);
                error = EINVAL;         /* XXX */
                goto bad;
        }
        XDR_DESTROY(&p->cku_outxdr);

        p->cku_config.knc_rdev = config->knc_rdev;
        p->cku_config.knc_semantics = config->knc_semantics;
        plen = strlen(config->knc_protofmly) + 1;
        p->cku_config.knc_protofmly = kmem_alloc(plen, KM_SLEEP);
        bcopy(config->knc_protofmly, p->cku_config.knc_protofmly, plen);
        p->cku_useresvport = -1; /* value is has not been set */

        cv_init(&p->cku_call.call_cv, NULL, CV_DEFAULT, NULL);
        mutex_init(&p->cku_call.call_lock, NULL, MUTEX_DEFAULT, NULL);

        *cl = h;
        return (0);

bad:
        auth_destroy(h->cl_auth);
        kmem_free(p->cku_addr.buf, addr->maxlen);
        kmem_free(p, sizeof (struct cku_private));

        return (error);
}

void
clnt_clts_kinit(CLIENT *h, struct netbuf *addr, int retrys, cred_t *cred)
{
        /* LINTED pointer alignment */
        struct cku_private *p = htop(h);
        struct rpcstat *rsp;

        rsp = zone_getspecific(rpcstat_zone_key, rpc_zone());
        ASSERT(rsp != NULL);

        p->cku_retrys = retrys;

        if (p->cku_addr.maxlen < addr->len) {
                if (p->cku_addr.maxlen != 0 && p->cku_addr.buf != NULL)
                        kmem_free(p->cku_addr.buf, p->cku_addr.maxlen);

                p->cku_addr.buf = kmem_zalloc(addr->maxlen, KM_SLEEP);
                p->cku_addr.maxlen = addr->maxlen;
        }

        p->cku_addr.len = addr->len;
        bcopy(addr->buf, p->cku_addr.buf, addr->len);

        p->cku_cred = cred;
        p->cku_xid = 0;
        p->cku_timers = NULL;
        p->cku_timeall = NULL;
        p->cku_feedback = NULL;
        p->cku_bcast = FALSE;
        p->cku_call.call_xid = 0;
        p->cku_call.call_hash = 0;
        p->cku_call.call_notified = FALSE;
        p->cku_call.call_next = NULL;
        p->cku_call.call_prev = NULL;
        p->cku_call.call_reply = NULL;
        p->cku_call.call_wq = NULL;
        p->cku_stats = rsp->rpc_clts_client;
}

/*
 * set the timers.  Return current retransmission timeout.
 */
static int
clnt_clts_ksettimers(CLIENT *h, struct rpc_timers *t, struct rpc_timers *all,
        int minimum, void (*feedback)(int, int, caddr_t), caddr_t arg,
        uint32_t xid)
{
        /* LINTED pointer alignment */
        struct cku_private *p = htop(h);
        int value;

        p->cku_feedback = feedback;
        p->cku_feedarg = arg;
        p->cku_timers = t;
        p->cku_timeall = all;
        if (xid)
                p->cku_xid = xid;
        value = all->rt_rtxcur;
        value += t->rt_rtxcur;
        if (value < minimum)
                return (minimum);
        RCSTAT_INCR(p->cku_stats, rctimers);
        return (value);
}

/*
 * Time out back off function. tim is in HZ
 */
#define MAXTIMO (20 * hz)
#define backoff(tim)    (((tim) < MAXTIMO) ? dobackoff(tim) : (tim))
#define dobackoff(tim)  ((((tim) << 1) > MAXTIMO) ? MAXTIMO : ((tim) << 1))

#define RETRY_POLL_TIMO 30

/*
 * Call remote procedure.
 * Most of the work of rpc is done here.  We serialize what is left
 * of the header (some was pre-serialized in the handle), serialize
 * the arguments, and send it off.  We wait for a reply or a time out.
 * Timeout causes an immediate return, other packet problems may cause
 * a retry on the receive.  When a good packet is received we deserialize
 * it, and check verification.  A bad reply code will cause one retry
 * with full (longhand) credentials.
 */
enum clnt_stat
clnt_clts_kcallit_addr(CLIENT *h, rpcproc_t procnum, xdrproc_t xdr_args,
        caddr_t argsp, xdrproc_t xdr_results, caddr_t resultsp,
        struct timeval wait, struct netbuf *sin)
{
        /* LINTED pointer alignment */
        struct cku_private *p = htop(h);
        XDR *xdrs;
        int stries = p->cku_retrys;
        int refreshes = REFRESHES;      /* number of times to refresh cred */
        int round_trip;                 /* time the RPC */
        int error;
        mblk_t *mp;
        mblk_t *mpdup;
        mblk_t *resp = NULL;
        mblk_t *tmp;
        calllist_t *call = &p->cku_call;
        clock_t ori_timout, timout;
        bool_t interrupted;
        enum clnt_stat status;
        struct rpc_msg reply_msg;
        enum clnt_stat re_status;
        endpnt_t *endpt;

        RCSTAT_INCR(p->cku_stats, rccalls);

        RPCLOG(2, "clnt_clts_kcallit_addr: wait.tv_sec: %ld\n", wait.tv_sec);
        RPCLOG(2, "clnt_clts_kcallit_addr: wait.tv_usec: %ld\n", wait.tv_usec);

        timout = TIMEVAL_TO_TICK(&wait);
        ori_timout = timout;

        if (p->cku_xid == 0) {
                p->cku_xid = alloc_xid();
                if (p->cku_endpnt != NULL)
                        endpnt_rele(p->cku_endpnt);
                p->cku_endpnt = NULL;
        }
        call->call_zoneid = rpc_zoneid();

        mpdup = NULL;
call_again:

        if (mpdup == NULL) {

                while ((mp = allocb(CKU_INITSIZE, BPRI_LO)) == NULL) {
                        if (strwaitbuf(CKU_INITSIZE, BPRI_LO)) {
                                p->cku_err.re_status = RPC_SYSTEMERROR;
                                p->cku_err.re_errno = ENOSR;
                                goto done;
                        }
                }

                xdrs = &p->cku_outxdr;
                xdrmblk_init(xdrs, mp, XDR_ENCODE, CKU_ALLOCSIZE);

                if (h->cl_auth->ah_cred.oa_flavor != RPCSEC_GSS) {
                        /*
                         * Copy in the preserialized RPC header
                         * information.
                         */
                        bcopy(p->cku_rpchdr, mp->b_rptr, CKU_HDRSIZE);

                        /*
                         * transaction id is the 1st thing in the output
                         * buffer.
                         */
                        /* LINTED pointer alignment */
                        (*(uint32_t *)(mp->b_rptr)) = p->cku_xid;

                        /* Skip the preserialized stuff. */
                        XDR_SETPOS(xdrs, CKU_HDRSIZE);

                        /* Serialize dynamic stuff into the output buffer. */
                        if ((!XDR_PUTINT32(xdrs, (int32_t *)&procnum)) ||
                            (!AUTH_MARSHALL(h->cl_auth, xdrs, p->cku_cred)) ||
                            (!(*xdr_args)(xdrs, argsp))) {
                                XDR_DESTROY(xdrs);
                                freemsg(mp);
                                p->cku_err.re_status = RPC_CANTENCODEARGS;
                                p->cku_err.re_errno = EIO;
                                goto done;
                        }
                } else {
                        uint32_t *uproc = (uint32_t *)
                            &p->cku_rpchdr[CKU_HDRSIZE];
                        IXDR_PUT_U_INT32(uproc, procnum);

                        (*(uint32_t *)(&p->cku_rpchdr[0])) = p->cku_xid;
                        XDR_SETPOS(xdrs, 0);

                        /* Serialize the procedure number and the arguments. */
                        if (!AUTH_WRAP(h->cl_auth, (caddr_t)p->cku_rpchdr,
                            CKU_HDRSIZE+4, xdrs, xdr_args, argsp)) {
                                XDR_DESTROY(xdrs);
                                freemsg(mp);
                                p->cku_err.re_status = RPC_CANTENCODEARGS;
                                p->cku_err.re_errno = EIO;
                                goto done;
                        }
                }

                XDR_DESTROY(xdrs);
        } else
                mp = mpdup;

        mpdup = dupmsg(mp);
        if (mpdup == NULL) {
                freemsg(mp);
                p->cku_err.re_status = RPC_SYSTEMERROR;
                p->cku_err.re_errno = ENOSR;
                goto done;
        }

        /*
         * Grab an endpnt only if the endpoint is NULL.  We could be retrying
         * the request and in this case we want to go through the same
         * source port, so that the duplicate request cache may detect a
         * retry.
         */

        if (p->cku_endpnt == NULL)
                p->cku_endpnt = endpnt_get(&p->cku_config, p->cku_useresvport);

        if (p->cku_endpnt == NULL) {
                freemsg(mp);
                p->cku_err.re_status = RPC_SYSTEMERROR;
                p->cku_err.re_errno = ENOSR;
                goto done;
        }

        round_trip = ddi_get_lbolt();

        error = clnt_clts_dispatch_send(p->cku_endpnt->e_wq, mp,
            &p->cku_addr, call, p->cku_xid, p->cku_cred);

        if (error != 0) {
                freemsg(mp);
                p->cku_err.re_status = RPC_CANTSEND;
                p->cku_err.re_errno = error;
                RCSTAT_INCR(p->cku_stats, rccantsend);
                goto done1;
        }

        RPCLOG(64, "clnt_clts_kcallit_addr: sent call for xid 0x%x\n",
            p->cku_xid);

        /*
         * There are two reasons for which we go back to to tryread.
         *
         * a) In case the status is RPC_PROCUNAVAIL and we sent out a
         *    broadcast we should not get any invalid messages with the
         *    RPC_PROCUNAVAIL error back. Some broken RPC implementations
         *    send them and for this we have to ignore them ( as we would
         *    have never received them ) and look for another message
         *    which might contain the valid response because we don't know
         *    how many broken implementations are in the network. So we are
         *    going to loop until
         *    - we received a valid response
         *    - we have processed all invalid responses and
         *      got a time out when we try to receive again a
         *      message.
         *
         * b) We will jump back to tryread also in case we failed
         *    within the AUTH_VALIDATE. In this case we should move
         *    on and loop until we received a valid response or we
         *    have processed all responses with broken authentication
         *    and we got a time out when we try to receive a message.
         */
tryread:
        mutex_enter(&call->call_lock);
        interrupted = FALSE;
        if (call->call_notified == FALSE) {
                klwp_t *lwp = ttolwp(curthread);
                clock_t cv_wait_ret = 1; /* init to > 0 */
                clock_t cv_timout = timout;

                if (lwp != NULL)
                        lwp->lwp_nostop++;

                cv_timout += ddi_get_lbolt();

                if (h->cl_nosignal)
                        while ((cv_wait_ret =
                            cv_timedwait(&call->call_cv,
                            &call->call_lock, cv_timout)) > 0 &&
                            call->call_notified == FALSE)
                                ;
                else
                        while ((cv_wait_ret =
                            cv_timedwait_sig(&call->call_cv,
                            &call->call_lock, cv_timout)) > 0 &&
                            call->call_notified == FALSE)
                                ;

                if (cv_wait_ret == 0)
                        interrupted = TRUE;

                if (lwp != NULL)
                        lwp->lwp_nostop--;
        }
        resp = call->call_reply;
        call->call_reply = NULL;
        status = call->call_status;
        /*
         * We have to reset the call_notified here. In case we have
         * to do a retry ( e.g. in case we got a RPC_PROCUNAVAIL
         * error ) we need to set this to false to ensure that
         * we will wait for the next message. When the next message
         * is going to arrive the function clnt_clts_dispatch_notify
         * will set this to true again.
         */
        call->call_notified = FALSE;
        call->call_status = RPC_TIMEDOUT;
        mutex_exit(&call->call_lock);

        if (status == RPC_TIMEDOUT) {
                if (interrupted) {
                        /*
                         * We got interrupted, bail out
                         */
                        p->cku_err.re_status = RPC_INTR;
                        p->cku_err.re_errno = EINTR;
                        goto done1;
                } else {
                        RPCLOG(8, "clnt_clts_kcallit_addr: "
                            "request w/xid 0x%x timedout "
                            "waiting for reply\n", p->cku_xid);
#if 0 /* XXX not yet */
                        /*
                         * Timeout may be due to a dead gateway. Send
                         * an ioctl downstream advising deletion of
                         * route when we reach the half-way point to
                         * timing out.
                         */
                        if (stries == p->cku_retrys/2) {
                                t_kadvise(p->cku_endpnt->e_tiptr,
                                    (uchar_t *)p->cku_addr.buf,
                                    p->cku_addr.len);
                        }
#endif /* not yet */
                        p->cku_err.re_status = RPC_TIMEDOUT;
                        p->cku_err.re_errno = ETIMEDOUT;
                        RCSTAT_INCR(p->cku_stats, rctimeouts);
                        goto done1;
                }
        }

        ASSERT(resp != NULL);

        /*
         * Prepare the message for further processing.  We need to remove
         * the datagram header and copy the source address if necessary.  No
         * need to verify the header since rpcmod took care of that.
         */
        /*
         * Copy the source address if the caller has supplied a netbuf.
         */
        if (sin != NULL) {
                union T_primitives *pptr;

                pptr = (union T_primitives *)resp->b_rptr;
                bcopy(resp->b_rptr + pptr->unitdata_ind.SRC_offset, sin->buf,
                    pptr->unitdata_ind.SRC_length);
                sin->len = pptr->unitdata_ind.SRC_length;
        }

        /*
         * Pop off the datagram header.
         * It was retained in rpcmodrput().
         */
        tmp = resp;
        resp = resp->b_cont;
        tmp->b_cont = NULL;
        freeb(tmp);

        round_trip = ddi_get_lbolt() - round_trip;
        /*
         * Van Jacobson timer algorithm here, only if NOT a retransmission.
         */
        if (p->cku_timers != NULL && stries == p->cku_retrys) {
                int rt;

                rt = round_trip;
                rt -= (p->cku_timers->rt_srtt >> 3);
                p->cku_timers->rt_srtt += rt;
                if (rt < 0)
                        rt = - rt;
                rt -= (p->cku_timers->rt_deviate >> 2);
                p->cku_timers->rt_deviate += rt;
                p->cku_timers->rt_rtxcur =
                    (clock_t)((p->cku_timers->rt_srtt >> 2) +
                    p->cku_timers->rt_deviate) >> 1;

                rt = round_trip;
                rt -= (p->cku_timeall->rt_srtt >> 3);
                p->cku_timeall->rt_srtt += rt;
                if (rt < 0)
                        rt = - rt;
                rt -= (p->cku_timeall->rt_deviate >> 2);
                p->cku_timeall->rt_deviate += rt;
                p->cku_timeall->rt_rtxcur =
                    (clock_t)((p->cku_timeall->rt_srtt >> 2) +
                    p->cku_timeall->rt_deviate) >> 1;
                if (p->cku_feedback != NULL) {
                        (*p->cku_feedback)(FEEDBACK_OK, procnum,
                            p->cku_feedarg);
                }
        }

        /*
         * Process reply
         */
        xdrs = &(p->cku_inxdr);
        xdrmblk_init(xdrs, resp, XDR_DECODE, 0);

        reply_msg.rm_direction = REPLY;
        reply_msg.rm_reply.rp_stat = MSG_ACCEPTED;
        reply_msg.acpted_rply.ar_stat = SUCCESS;
        reply_msg.acpted_rply.ar_verf = _null_auth;
        /*
         *  xdr_results will be done in AUTH_UNWRAP.
         */
        reply_msg.acpted_rply.ar_results.where = NULL;
        reply_msg.acpted_rply.ar_results.proc = xdr_void;

        /*
         * Decode and validate the response.
         */
        if (!xdr_replymsg(xdrs, &reply_msg)) {
                p->cku_err.re_status = RPC_CANTDECODERES;
                p->cku_err.re_errno = EIO;
                (void) xdr_rpc_free_verifier(xdrs, &reply_msg);
                XDR_DESTROY(xdrs);
                goto done1;
        }

        _seterr_reply(&reply_msg, &(p->cku_err));

        re_status = p->cku_err.re_status;
        if (re_status == RPC_SUCCESS) {
                /*
                 * Reply is good, check auth.
                 */
                if (!AUTH_VALIDATE(h->cl_auth,
                    &reply_msg.acpted_rply.ar_verf)) {
                        p->cku_err.re_status = RPC_AUTHERROR;
                        p->cku_err.re_why = AUTH_INVALIDRESP;
                        RCSTAT_INCR(p->cku_stats, rcbadverfs);
                        (void) xdr_rpc_free_verifier(xdrs, &reply_msg);
                        XDR_DESTROY(xdrs);
                        goto tryread;
                }
                if (!AUTH_UNWRAP(h->cl_auth, xdrs, xdr_results, resultsp)) {
                        p->cku_err.re_status = RPC_CANTDECODERES;
                        p->cku_err.re_errno = EIO;
                }
                (void) xdr_rpc_free_verifier(xdrs, &reply_msg);
                XDR_DESTROY(xdrs);
                goto done1;
        }
        /* set errno in case we can't recover */
        if (re_status != RPC_VERSMISMATCH &&
            re_status != RPC_AUTHERROR && re_status != RPC_PROGVERSMISMATCH)
                p->cku_err.re_errno = EIO;
        /*
         * Determine whether or not we're doing an RPC
         * broadcast. Some server implementations don't
         * follow RFC 1050, section 7.4.2 in that they
         * don't remain silent when they see a proc
         * they don't support. Therefore we keep trying
         * to receive on RPC_PROCUNAVAIL, hoping to get
         * a valid response from a compliant server.
         */
        if (re_status == RPC_PROCUNAVAIL && p->cku_bcast) {
                (void) xdr_rpc_free_verifier(xdrs, &reply_msg);
                XDR_DESTROY(xdrs);
                goto tryread;
        }
        if (re_status == RPC_AUTHERROR) {

                (void) xdr_rpc_free_verifier(xdrs, &reply_msg);
                XDR_DESTROY(xdrs);
                call_table_remove(call);
                if (call->call_reply != NULL) {
                        freemsg(call->call_reply);
                        call->call_reply = NULL;
                }

                /*
                 * Maybe our credential need to be refreshed
                 */
                if (refreshes > 0 &&
                    AUTH_REFRESH(h->cl_auth, &reply_msg, p->cku_cred)) {
                        /*
                         * The credential is refreshed. Try the request again.
                         * Even if stries == 0, we still retry as long as
                         * refreshes > 0. This prevents a soft authentication
                         * error turning into a hard one at an upper level.
                         */
                        refreshes--;
                        RCSTAT_INCR(p->cku_stats, rcbadcalls);
                        RCSTAT_INCR(p->cku_stats, rcnewcreds);

                        freemsg(mpdup);
                        mpdup = NULL;
                        freemsg(resp);
                        resp = NULL;
                        goto call_again;
                }
                /*
                 * We have used the client handle to do an AUTH_REFRESH
                 * and the RPC status may be set to RPC_SUCCESS;
                 * Let's make sure to set it to RPC_AUTHERROR.
                 */
                p->cku_err.re_status = RPC_CANTDECODERES;

                /*
                 * Map recoverable and unrecoverable
                 * authentication errors to appropriate errno
                 */
                switch (p->cku_err.re_why) {
                case AUTH_TOOWEAK:
                        /*
                         * Could be an nfsportmon failure, set
                         * useresvport and try again.
                         */
                        if (p->cku_useresvport != 1) {
                                p->cku_useresvport = 1;

                                freemsg(mpdup);
                                mpdup = NULL;
                                freemsg(resp);
                                resp = NULL;

                                endpt = p->cku_endpnt;
                                if (endpt->e_tiptr != NULL) {
                                        mutex_enter(&endpt->e_lock);
                                        endpt->e_flags &= ~ENDPNT_BOUND;
                                        (void) t_kclose(endpt->e_tiptr, 1);
                                        endpt->e_tiptr = NULL;
                                        mutex_exit(&endpt->e_lock);

                                }

                                p->cku_xid = alloc_xid();
                                endpnt_rele(p->cku_endpnt);
                                p->cku_endpnt = NULL;
                                goto call_again;
                        }
                        /* FALLTHRU */
                case AUTH_BADCRED:
                case AUTH_BADVERF:
                case AUTH_INVALIDRESP:
                case AUTH_FAILED:
                case RPCSEC_GSS_NOCRED:
                case RPCSEC_GSS_FAILED:
                        p->cku_err.re_errno = EACCES;
                        break;
                case AUTH_REJECTEDCRED:
                case AUTH_REJECTEDVERF:
                default:
                        p->cku_err.re_errno = EIO;
                        break;
                }
                RPCLOG(1, "clnt_clts_kcallit : authentication failed "
                    "with RPC_AUTHERROR of type %d\n",
                    p->cku_err.re_why);
                goto done;
        }

        (void) xdr_rpc_free_verifier(xdrs, &reply_msg);
        XDR_DESTROY(xdrs);

done1:
        call_table_remove(call);
        if (call->call_reply != NULL) {
                freemsg(call->call_reply);
                call->call_reply = NULL;
        }
        RPCLOG(64, "clnt_clts_kcallit_addr: xid 0x%x taken off dispatch list",
            p->cku_xid);

done:
        if (resp != NULL) {
                freemsg(resp);
                resp = NULL;
        }

        if ((p->cku_err.re_status != RPC_SUCCESS) &&
            (p->cku_err.re_status != RPC_INTR) &&
            (p->cku_err.re_status != RPC_UDERROR) &&
            !IS_UNRECOVERABLE_RPC(p->cku_err.re_status)) {
                if (p->cku_feedback != NULL && stries == p->cku_retrys) {
                        (*p->cku_feedback)(FEEDBACK_REXMIT1, procnum,
                            p->cku_feedarg);
                }

                timout = backoff(timout);
                if (p->cku_timeall != (struct rpc_timers *)0)
                        p->cku_timeall->rt_rtxcur = timout;

                if (p->cku_err.re_status == RPC_SYSTEMERROR ||
                    p->cku_err.re_status == RPC_CANTSEND) {
                        /*
                         * Errors due to lack of resources, wait a bit
                         * and try again.
                         */
                        (void) delay(hz/10);
                }
                if (stries-- > 0) {
                        RCSTAT_INCR(p->cku_stats, rcretrans);
                        goto call_again;
                }
        }

        if (mpdup != NULL)
                freemsg(mpdup);

        if (p->cku_err.re_status != RPC_SUCCESS) {
                RCSTAT_INCR(p->cku_stats, rcbadcalls);
        }

        /*
         * Allow the endpoint to be held by the client handle in case this
         * RPC was not successful.  A retry may occur at a higher level and
         * in this case we may want to send the request over the same
         * source port.
         * Endpoint is also released for one-way RPC: no reply, nor retransmit
         * is expected.
         */
        if ((p->cku_err.re_status == RPC_SUCCESS ||
            (p->cku_err.re_status == RPC_TIMEDOUT && ori_timout == 0)) &&
            p->cku_endpnt != NULL) {
                endpnt_rele(p->cku_endpnt);
                p->cku_endpnt = NULL;
        } else {
                DTRACE_PROBE2(clnt_clts_kcallit_done, int, p->cku_err.re_status,
                    struct endpnt *, p->cku_endpnt);
        }

        return (p->cku_err.re_status);
}

static enum clnt_stat
clnt_clts_kcallit(CLIENT *h, rpcproc_t procnum, xdrproc_t xdr_args,
        caddr_t argsp, xdrproc_t xdr_results, caddr_t resultsp,
        struct timeval wait)
{
        return (clnt_clts_kcallit_addr(h, procnum, xdr_args, argsp,
            xdr_results, resultsp, wait, NULL));
}

/*
 * Return error info on this handle.
 */
static void
clnt_clts_kerror(CLIENT *h, struct rpc_err *err)
{
        /* LINTED pointer alignment */
        struct cku_private *p = htop(h);

        *err = p->cku_err;
}

/*ARGSUSED*/
static bool_t
clnt_clts_kfreeres(CLIENT *h, xdrproc_t xdr_res, caddr_t res_ptr)
{
        xdr_free(xdr_res, res_ptr);

        return (TRUE);
}

/*ARGSUSED*/
static void
clnt_clts_kabort(CLIENT *h)
{
}

static bool_t
clnt_clts_kcontrol(CLIENT *h, int cmd, char *arg)
{
        /* LINTED pointer alignment */
        struct cku_private *p = htop(h);

        switch (cmd) {
        case CLSET_XID:
                p->cku_xid = *((uint32_t *)arg);
                return (TRUE);

        case CLGET_XID:
                *((uint32_t *)arg) = p->cku_xid;
                return (TRUE);

        case CLSET_BCAST:
                p->cku_bcast = *((uint32_t *)arg);
                return (TRUE);

        case CLGET_BCAST:
                *((uint32_t *)arg) = p->cku_bcast;
                return (TRUE);
        case CLSET_BINDRESVPORT:
                if (arg == NULL)
                        return (FALSE);

                if (*(int *)arg != 1 && *(int *)arg != 0)
                        return (FALSE);

                p->cku_useresvport = *(int *)arg;

                return (TRUE);

        case CLGET_BINDRESVPORT:
                if (arg == NULL)
                        return (FALSE);

                *(int *)arg = p->cku_useresvport;

                return (TRUE);

        default:
                return (FALSE);
        }
}

/*
 * Destroy rpc handle.
 * Frees the space used for output buffer, private data, and handle
 * structure, and the file pointer/TLI data on last reference.
 */
static void
clnt_clts_kdestroy(CLIENT *h)
{
        /* LINTED pointer alignment */
        struct cku_private *p = htop(h);
        calllist_t *call = &p->cku_call;

        int plen;

        RPCLOG(8, "clnt_clts_kdestroy h: %p\n", (void *)h);
        RPCLOG(8, "clnt_clts_kdestroy h: xid=0x%x\n", p->cku_xid);

        if (p->cku_endpnt != NULL)
                endpnt_rele(p->cku_endpnt);

        cv_destroy(&call->call_cv);
        mutex_destroy(&call->call_lock);

        plen = strlen(p->cku_config.knc_protofmly) + 1;
        kmem_free(p->cku_config.knc_protofmly, plen);
        kmem_free(p->cku_addr.buf, p->cku_addr.maxlen);
        kmem_free(p, sizeof (*p));
}

/*
 * The connectionless (CLTS) kRPC endpoint management subsystem.
 *
 * Because endpoints are potentially shared among threads making RPC calls,
 * they are managed in a pool according to type (endpnt_type_t).  Each
 * endpnt_type_t points to a list of usable endpoints through the e_pool
 * field, which is of type list_t.  list_t is a doubly-linked list.
 * The number of endpoints in the pool is stored in the e_cnt field of
 * endpnt_type_t and the endpoints are reference counted using the e_ref field
 * in the endpnt_t structure.
 *
 * As an optimization, endpoints that have no references are also linked
 * to an idle list via e_ilist which is also of type list_t.  When a thread
 * calls endpnt_get() to obtain a transport endpoint, the idle list is first
 * consulted and if such an endpoint exists, it is removed from the idle list
 * and returned to the caller.
 *
 * If the idle list is empty, then a check is made to see if more endpoints
 * can be created.  If so, we proceed and create a new endpoint which is added
 * to the pool and returned to the caller.  If we have reached the limit and
 * cannot make a new endpoint then one is returned to the caller via round-
 * robin policy.
 *
 * When an endpoint is placed on the idle list by a thread calling
 * endpnt_rele(), it is timestamped and then a reaper taskq is scheduled to
 * be dispatched if one hasn't already been.  When the timer fires, the
 * taskq traverses the idle list and checks to see which endpoints are
 * eligible to be closed.  It determines this by checking if the timestamp
 * when the endpoint was released has exceeded the the threshold for how long
 * it should stay alive.
 *
 * endpnt_t structures remain persistent until the memory reclaim callback,
 * endpnt_reclaim(), is invoked.
 *
 * Here is an example of how the data structures would be laid out by the
 * subsystem:
 *
 *       endpnt_type_t
 *
 *       loopback                                 inet
 *       _______________                          ______________
 *      | e_next        |----------------------->| e_next       |---->>
 *      | e_pool        |<---+                   | e_pool       |<----+
 *      | e_ilist       |<---+--+                | e_ilist      |<----+--+
 *   +->| e_pcurr       |----+--+--+          +->| e_pcurr      |-----+--+--+
 *   |  | ...           |    |  |  |          |  | ...          |     |  |  |
 *   |  | e_itimer (90) |    |  |  |          |  | e_itimer (0) |     |  |  |
 *   |  | e_cnt (1)     |    |  |  |          |  | e_cnt (3)    |     |  |  |
 *   |  +---------------+    |  |  |          |  +--------------+     |  |  |
 *   |                       |  |  |          |                       |  |  |
 *   |   endpnt_t            |  |  |          |                       |  |  |
 *   |   ____________        |  |  |          |   ____________        |  |  |
 *   |  | e_node     |<------+  |  |          |  | e_node     |<------+  |  |
 *   |  | e_idle     |<---------+  |          |  | e_idle     |       |  |  |
 *   +--| e_type     |<------------+          +--| e_type     |       |  |  |
 *      | e_tiptr    |                        |  | e_tiptr    |       |  |  |
 *      | ...        |                        |  | ...        |       |  |  |
 *      | e_lock     |                        |  | e_lock     |       |  |  |
 *      | ...        |                        |  | ...        |       |  |  |
 *      | e_ref (0)  |                        |  | e_ref (2)  |       |  |  |
 *      | e_itime    |                        |  | e_itime    |       |  |  |
 *      +------------+                        |  +------------+       |  |  |
 *                                            |                       |  |  |
 *                                            |                       |  |  |
 *                                            |   ____________        |  |  |
 *                                            |  | e_node     |<------+  |  |
 *                                            |  | e_idle     |<------+--+  |
 *                                            +--| e_type     |       |     |
 *                                            |  | e_tiptr    |       |     |
 *                                            |  | ...        |       |     |
 *                                            |  | e_lock     |       |     |
 *                                            |  | ...        |       |     |
 *                                            |  | e_ref (0)  |       |     |
 *                                            |  | e_itime    |       |     |
 *                                            |  +------------+       |     |
 *                                            |                       |     |
 *                                            |                       |     |
 *                                            |   ____________        |     |
 *                                            |  | e_node     |<------+     |
 *                                            |  | e_idle     |             |
 *                                            +--| e_type     |<------------+
 *                                               | e_tiptr    |
 *                                               | ...        |
 *                                               | e_lock     |
 *                                               | ...        |
 *                                               | e_ref (1)  |
 *                                               | e_itime    |
 *                                               +------------+
 *
 * Endpoint locking strategy:
 *
 * The following functions manipulate lists which hold the endpoint and the
 * endpoints themselves:
 *
 * endpnt_get()/check_endpnt()/endpnt_rele()/endpnt_reap()/do_endpnt_reclaim()
 *
 * Lock description follows:
 *
 * endpnt_type_lock: Global reader/writer lock which protects accesses to the
 *                   endpnt_type_list.
 *
 * e_plock: Lock defined in the endpnt_type_t.  It is intended to
 *          protect accesses to the pool of endopints (e_pool) for a given
 *          endpnt_type_t.
 *
 * e_ilock: Lock defined in endpnt_type_t.  It is intended to protect accesses
 *          to the idle list (e_ilist) of available endpoints for a given
 *          endpnt_type_t.  It also protects access to the e_itimer, e_async_cv,
 *          and e_async_count fields in endpnt_type_t.
 *
 * e_lock: Lock defined in the endpnt structure.  It is intended to protect
 *         flags, cv, and ref count.
 *
 * The order goes as follows so as not to induce deadlock.
 *
 * endpnt_type_lock -> e_plock -> e_ilock -> e_lock
 *
 * Interaction with Zones and shutting down:
 *
 * endpnt_type_ts are uniquely identified by the (e_zoneid, e_rdev, e_protofmly)
 * tuple, which means that a zone may not reuse another zone's idle endpoints
 * without first doing a t_kclose().
 *
 * A zone's endpnt_type_ts are destroyed when a zone is shut down; e_async_cv
 * and e_async_count are used to keep track of the threads in endpnt_taskq
 * trying to reap endpnt_ts in the endpnt_type_t.
 */

/*
 * Allocate and initialize an endpnt_type_t
 */
static struct endpnt_type *
endpnt_type_create(struct knetconfig *config)
{
        struct endpnt_type      *etype;

        /*
         * Allocate a new endpoint type to hang a list of
         * endpoints off of it.
         */
        etype = kmem_alloc(sizeof (struct endpnt_type), KM_SLEEP);
        etype->e_next = NULL;
        etype->e_pcurr = NULL;
        etype->e_itimer = 0;
        etype->e_cnt = 0;

        (void) strncpy(etype->e_protofmly, config->knc_protofmly, KNC_STRSIZE);
        mutex_init(&etype->e_plock, NULL, MUTEX_DEFAULT, NULL);
        mutex_init(&etype->e_ilock, NULL, MUTEX_DEFAULT, NULL);
        etype->e_rdev = config->knc_rdev;
        etype->e_zoneid = rpc_zoneid();
        etype->e_async_count = 0;
        cv_init(&etype->e_async_cv, NULL, CV_DEFAULT, NULL);

        list_create(&etype->e_pool, sizeof (endpnt_t),
            offsetof(endpnt_t, e_node));
        list_create(&etype->e_ilist, sizeof (endpnt_t),
            offsetof(endpnt_t, e_idle));

        /*
         * Check to see if we need to create a taskq for endpoint
         * reaping
         */
        mutex_enter(&endpnt_taskq_lock);
        if (taskq_created == FALSE) {
                taskq_created = TRUE;
                mutex_exit(&endpnt_taskq_lock);
                ASSERT(endpnt_taskq == NULL);
                endpnt_taskq = taskq_create("clts_endpnt_taskq", 1,
                    minclsyspri, 200, INT_MAX, 0);
        } else
                mutex_exit(&endpnt_taskq_lock);

        return (etype);
}

/*
 * Free an endpnt_type_t
 */
static void
endpnt_type_free(struct endpnt_type *etype)
{
        mutex_destroy(&etype->e_plock);
        mutex_destroy(&etype->e_ilock);
        list_destroy(&etype->e_pool);
        list_destroy(&etype->e_ilist);
        kmem_free(etype, sizeof (endpnt_type_t));
}

/*
 * Check the endpoint to ensure that it is suitable for use.
 *
 * Possible return values:
 *
 * return (1) - Endpoint is established, but needs to be re-opened.
 * return (0) && *newp == NULL - Endpoint is established, but unusable.
 * return (0) && *newp != NULL - Endpoint is established and usable.
 */
static int
check_endpnt(struct endpnt *endp, struct endpnt **newp)
{
        *newp = endp;

        mutex_enter(&endp->e_lock);
        ASSERT(endp->e_ref >= 1);

        /*
         * The first condition we check for is if the endpoint has been
         * allocated, but is unusable either because it has been closed or
         * has been marked stale.  Only *one* thread will be allowed to
         * execute the then clause.  This is enforced because the first thread
         * to check this condition will clear the flags, so that subsequent
         * thread(s) checking this endpoint will move on.
         */
        if ((endp->e_flags & ENDPNT_ESTABLISHED) &&
            (!(endp->e_flags & ENDPNT_BOUND) ||
            (endp->e_flags & ENDPNT_STALE))) {
                /*
                 * Clear the flags here since they will be
                 * set again by this thread.  They need to be
                 * individually cleared because we want to maintain
                 * the state for ENDPNT_ONIDLE.
                 */
                endp->e_flags &= ~(ENDPNT_ESTABLISHED |
                    ENDPNT_WAITING | ENDPNT_BOUND | ENDPNT_STALE);
                mutex_exit(&endp->e_lock);
                return (1);
        }

        /*
         * The second condition is meant for any thread that is waiting for
         * an endpoint to become established.  It will cv_wait() until
         * the condition for the endpoint has been changed to ENDPNT_BOUND or
         * ENDPNT_STALE.
         */
        while (!(endp->e_flags & ENDPNT_BOUND) &&
            !(endp->e_flags & ENDPNT_STALE)) {
                endp->e_flags |= ENDPNT_WAITING;
                cv_wait(&endp->e_cv, &endp->e_lock);
        }

        ASSERT(endp->e_flags & ENDPNT_ESTABLISHED);

        /*
         * The last case we check for is if the endpoint has been marked stale.
         * If this is the case then set *newp to NULL and return, so that the
         * caller is notified of the error and can take appropriate action.
         */
        if (endp->e_flags & ENDPNT_STALE) {
                endp->e_ref--;
                *newp = NULL;
        }
        mutex_exit(&endp->e_lock);
        return (0);
}

#ifdef DEBUG
/*
 * Provide a fault injection setting to test error conditions.
 */
static int endpnt_get_return_null = 0;
#endif

/*
 * Returns a handle (struct endpnt *) to an open and bound endpoint
 * specified by the knetconfig passed in.  Returns NULL if no valid endpoint
 * can be obtained.
 */
static struct endpnt *
endpnt_get(struct knetconfig *config, int useresvport)
{
        struct endpnt_type      *n_etype = NULL;
        struct endpnt_type      *np = NULL;
        struct endpnt           *new = NULL;
        struct endpnt           *endp = NULL;
        struct endpnt           *next = NULL;
        TIUSER                  *tiptr = NULL;
        int                     rtries = BINDRESVPORT_RETRIES;
        int                     i = 0;
        int                     error;
        int                     retval;
        zoneid_t                zoneid = rpc_zoneid();
        cred_t                  *cr;

        RPCLOG(1, "endpnt_get: protofmly %s, ", config->knc_protofmly);
        RPCLOG(1, "rdev %ld\n", config->knc_rdev);

#ifdef DEBUG
        /*
         * Inject fault if desired.  Pretend we have a stale endpoint
         * and return NULL.
         */
        if (endpnt_get_return_null > 0) {
                endpnt_get_return_null--;
                return (NULL);
        }
#endif
        rw_enter(&endpnt_type_lock, RW_READER);

top:
        for (np = endpnt_type_list; np != NULL; np = np->e_next)
                if ((np->e_zoneid == zoneid) &&
                    (np->e_rdev == config->knc_rdev) &&
                    (strcmp(np->e_protofmly,
                    config->knc_protofmly) == 0))
                        break;

        if (np == NULL && n_etype != NULL) {
                ASSERT(rw_write_held(&endpnt_type_lock));

                /*
                 * Link the endpoint type onto the list
                 */
                n_etype->e_next = endpnt_type_list;
                endpnt_type_list = n_etype;
                np = n_etype;
                n_etype = NULL;
        }

        if (np == NULL) {
                /*
                 * The logic here is that we were unable to find an
                 * endpnt_type_t that matched our criteria, so we allocate a
                 * new one.  Because kmem_alloc() needs to be called with
                 * KM_SLEEP, we drop our locks so that we don't induce
                 * deadlock.  After allocating and initializing the
                 * endpnt_type_t, we reaquire the lock and go back to check
                 * if this entry needs to be added to the list.  Since we do
                 * some operations without any locking other threads may
                 * have been looking for the same endpnt_type_t and gone
                 * through this code path.  We check for this case and allow
                 * one thread to link its endpnt_type_t to the list and the
                 * other threads will simply free theirs.
                 */
                rw_exit(&endpnt_type_lock);
                n_etype = endpnt_type_create(config);

                /*
                 * We need to reaquire the lock with RW_WRITER here so that
                 * we can safely link the new endpoint type onto the list.
                 */
                rw_enter(&endpnt_type_lock, RW_WRITER);
                goto top;
        }

        rw_exit(&endpnt_type_lock);
        /*
         * If n_etype is not NULL, then another thread was able to
         * insert an endpnt_type_t of this type  onto the list before
         * we did.  Go ahead and free ours.
         */
        if (n_etype != NULL)
                endpnt_type_free(n_etype);

        mutex_enter(&np->e_ilock);
        /*
         * The algorithm to hand out endpoints is to first
         * give out those that are idle if such endpoints
         * exist.  Otherwise, create a new one if we haven't
         * reached the max threshold.  Finally, we give out
         * endpoints in a pseudo LRU fashion (round-robin).
         *
         * Note:  The idle list is merely a hint of those endpoints
         * that should be idle.  There exists a window after the
         * endpoint is released and before it is linked back onto the
         * idle list where a thread could get a reference to it and
         * use it.  This is okay, since the reference counts will
         * still be consistent.
         */
        if ((endp = (endpnt_t *)list_head(&np->e_ilist)) != NULL) {
                timeout_id_t t_id = 0;

                mutex_enter(&endp->e_lock);
                endp->e_ref++;
                endp->e_itime = 0;
                endp->e_flags &= ~ENDPNT_ONIDLE;
                mutex_exit(&endp->e_lock);

                /*
                 * Pop the endpoint off the idle list and hand it off
                 */
                list_remove(&np->e_ilist, endp);

                if (np->e_itimer != 0) {
                        t_id = np->e_itimer;
                        np->e_itimer = 0;
                }
                mutex_exit(&np->e_ilock);
                /*
                 * Reset the idle timer if it has been set
                 */
                if (t_id != (timeout_id_t)0)
                        (void) untimeout(t_id);

                if (check_endpnt(endp, &new) == 0)
                        return (new);
        } else if (np->e_cnt >= clnt_clts_max_endpoints) {
                /*
                 * There are no idle endpoints currently, so
                 * create a new one if we have not reached the maximum or
                 * hand one out in round-robin.
                 */
                mutex_exit(&np->e_ilock);
                mutex_enter(&np->e_plock);
                endp = np->e_pcurr;
                mutex_enter(&endp->e_lock);
                endp->e_ref++;
                mutex_exit(&endp->e_lock);

                ASSERT(endp != NULL);
                /*
                 * Advance the pointer to the next eligible endpoint, if
                 * necessary.
                 */
                if (np->e_cnt > 1) {
                        next = (endpnt_t *)list_next(&np->e_pool, np->e_pcurr);
                        if (next == NULL)
                                next = (endpnt_t *)list_head(&np->e_pool);
                        np->e_pcurr = next;
                }

                mutex_exit(&np->e_plock);

                /*
                 * We need to check to see if this endpoint is bound or
                 * not.  If it is in progress then just wait until
                 * the set up is complete
                 */
                if (check_endpnt(endp, &new) == 0)
                        return (new);
        } else {
                mutex_exit(&np->e_ilock);
                mutex_enter(&np->e_plock);

                /*
                 * Allocate a new endpoint to use.  If we can't allocate any
                 * more memory then use one that is already established if any
                 * such endpoints exist.
                 */
                new = kmem_cache_alloc(endpnt_cache, KM_NOSLEEP);
                if (new == NULL) {
                        RPCLOG0(1, "endpnt_get: kmem_cache_alloc failed\n");
                        /*
                         * Try to recover by using an existing endpoint.
                         */
                        if (np->e_cnt <= 0) {
                                mutex_exit(&np->e_plock);
                                return (NULL);
                        }
                        endp = np->e_pcurr;
                        if ((next = list_next(&np->e_pool, np->e_pcurr)) !=
                            NULL)
                                np->e_pcurr = next;
                        ASSERT(endp != NULL);
                        mutex_enter(&endp->e_lock);
                        endp->e_ref++;
                        mutex_exit(&endp->e_lock);
                        mutex_exit(&np->e_plock);

                        if (check_endpnt(endp, &new) == 0)
                                return (new);
                } else {
                        /*
                         * Partially init an endpoint structure and put
                         * it on the list, so that other interested threads
                         * know that one is being created
                         */
                        bzero(new, sizeof (struct endpnt));

                        cv_init(&new->e_cv, NULL, CV_DEFAULT, NULL);
                        mutex_init(&new->e_lock, NULL, MUTEX_DEFAULT, NULL);
                        new->e_ref = 1;
                        new->e_type = np;

                        /*
                         * Link the endpoint into the pool.
                         */
                        list_insert_head(&np->e_pool, new);
                        np->e_cnt++;
                        if (np->e_pcurr == NULL)
                                np->e_pcurr = new;
                        mutex_exit(&np->e_plock);
                }
        }

        /*
         * The transport should be opened with sufficient privs
         */
        cr = zone_kcred();
        error = t_kopen(NULL, config->knc_rdev, FREAD|FWRITE|FNDELAY, &tiptr,
            cr);
        if (error) {
                RPCLOG(1, "endpnt_get: t_kopen: %d\n", error);
                goto bad;
        }

        new->e_tiptr = tiptr;
        rpc_poptimod(tiptr->fp->f_vnode);

        /*
         * Allow the kernel to push the module on behalf of the user.
         */
        error = strioctl(tiptr->fp->f_vnode, I_PUSH, (intptr_t)"rpcmod", 0,
            K_TO_K, cr, &retval);
        if (error) {
                RPCLOG(1, "endpnt_get: kstr_push on rpcmod failed %d\n", error);
                goto bad;
        }

        error = strioctl(tiptr->fp->f_vnode, RPC_CLIENT, 0, 0, K_TO_K,
            cr, &retval);
        if (error) {
                RPCLOG(1, "endpnt_get: strioctl failed %d\n", error);
                goto bad;
        }

        /*
         * Connectionless data flow should bypass the stream head.
         */
        new->e_wq = tiptr->fp->f_vnode->v_stream->sd_wrq->q_next;

        error = strioctl(tiptr->fp->f_vnode, I_PUSH, (intptr_t)"timod", 0,
            K_TO_K, cr, &retval);
        if (error) {
                RPCLOG(1, "endpnt_get: kstr_push on timod failed %d\n", error);
                goto bad;
        }

        /*
         * Attempt to bind the endpoint.  If we fail then propogate
         * error back to calling subsystem, so that it can be handled
         * appropriately.
         * If the caller has not specified reserved port usage then
         * take the system default.
         */
        if (useresvport == -1)
                useresvport = clnt_clts_do_bindresvport;

        if (useresvport &&
            (strcmp(config->knc_protofmly, NC_INET) == 0 ||
            strcmp(config->knc_protofmly, NC_INET6) == 0)) {

                while ((error =
                    bindresvport(new->e_tiptr, NULL, NULL, FALSE)) != 0) {
                        RPCLOG(1,
                            "endpnt_get: bindresvport error %d\n", error);
                        if (error != EPROTO) {
                                if (rtries-- <= 0)
                                        goto bad;

                                delay(hz << i++);
                                continue;
                        }

                        (void) t_kclose(new->e_tiptr, 1);
                        /*
                         * reopen with all privileges
                         */
                        error = t_kopen(NULL, config->knc_rdev,
                            FREAD|FWRITE|FNDELAY,
                            &new->e_tiptr, cr);
                        if (error) {
                                RPCLOG(1, "endpnt_get: t_kopen: %d\n", error);
                                        new->e_tiptr = NULL;
                                        goto bad;
                        }
                }
        } else if ((error = t_kbind(new->e_tiptr, NULL, NULL)) != 0) {
                RPCLOG(1, "endpnt_get: t_kbind failed: %d\n", error);
                goto bad;
        }

        /*
         * Set the flags and notify and waiters that we have an established
         * endpoint.
         */
        mutex_enter(&new->e_lock);
        new->e_flags |= ENDPNT_ESTABLISHED;
        new->e_flags |= ENDPNT_BOUND;
        if (new->e_flags & ENDPNT_WAITING) {
                cv_broadcast(&new->e_cv);
                new->e_flags &= ~ENDPNT_WAITING;
        }
        mutex_exit(&new->e_lock);

        return (new);

bad:
        ASSERT(new != NULL);
        /*
         * mark this endpoint as stale and notify any threads waiting
         * on this endpoint that it will be going away.
         */
        mutex_enter(&new->e_lock);
        if (new->e_ref > 0) {
                new->e_flags |= ENDPNT_ESTABLISHED;
                new->e_flags |= ENDPNT_STALE;
                if (new->e_flags & ENDPNT_WAITING) {
                        cv_broadcast(&new->e_cv);
                        new->e_flags &= ~ENDPNT_WAITING;
                }
        }
        new->e_ref--;
        new->e_tiptr = NULL;
        mutex_exit(&new->e_lock);

        /*
         * If there was a transport endopoint opened, then close it.
         */
        if (tiptr != NULL)
                (void) t_kclose(tiptr, 1);

        return (NULL);
}

/*
 * Release a referece to the endpoint
 */
static void
endpnt_rele(struct endpnt *sp)
{
        mutex_enter(&sp->e_lock);
        ASSERT(sp->e_ref > 0);
        sp->e_ref--;
        /*
         * If the ref count is zero, then start the idle timer and link
         * the endpoint onto the idle list.
         */
        if (sp->e_ref == 0) {
                sp->e_itime = gethrestime_sec();

                /*
                 * Check to see if the endpoint is already linked to the idle
                 * list, so that we don't try to reinsert it.
                 */
                if (sp->e_flags & ENDPNT_ONIDLE) {
                        mutex_exit(&sp->e_lock);
                        mutex_enter(&sp->e_type->e_ilock);
                        endpnt_reap_settimer(sp->e_type);
                        mutex_exit(&sp->e_type->e_ilock);
                        return;
                }

                sp->e_flags |= ENDPNT_ONIDLE;
                mutex_exit(&sp->e_lock);
                mutex_enter(&sp->e_type->e_ilock);
                list_insert_tail(&sp->e_type->e_ilist, sp);
                endpnt_reap_settimer(sp->e_type);
                mutex_exit(&sp->e_type->e_ilock);
        } else
                mutex_exit(&sp->e_lock);
}

static void
endpnt_reap_settimer(endpnt_type_t *etp)
{
        if (etp->e_itimer == (timeout_id_t)0)
                etp->e_itimer = timeout(endpnt_reap_dispatch, (void *)etp,
                    clnt_clts_taskq_dispatch_interval);
}

static void
endpnt_reap_dispatch(void *a)
{
        endpnt_type_t *etp = a;

        /*
         * The idle timer has fired, so dispatch the taskq to close the
         * endpoint.
         */
        if (taskq_dispatch(endpnt_taskq, (task_func_t *)endpnt_reap, etp,
            TQ_NOSLEEP) == NULL)
                return;
        mutex_enter(&etp->e_ilock);
        etp->e_async_count++;
        mutex_exit(&etp->e_ilock);
}

/*
 * Traverse the idle list and close those endpoints that have reached their
 * timeout interval.
 */
static void
endpnt_reap(endpnt_type_t *etp)
{
        struct endpnt *e;
        struct endpnt *next_node = NULL;

        mutex_enter(&etp->e_ilock);
        e = list_head(&etp->e_ilist);
        while (e != NULL) {
                next_node = list_next(&etp->e_ilist, e);

                mutex_enter(&e->e_lock);
                if (e->e_ref > 0) {
                        mutex_exit(&e->e_lock);
                        e = next_node;
                        continue;
                }

                ASSERT(e->e_ref == 0);
                if (e->e_itime > 0 &&
                    (e->e_itime + clnt_clts_endpoint_reap_interval) <
                    gethrestime_sec()) {
                        e->e_flags &= ~ENDPNT_BOUND;
                        (void) t_kclose(e->e_tiptr, 1);
                        e->e_tiptr = NULL;
                        e->e_itime = 0;
                }
                mutex_exit(&e->e_lock);
                e = next_node;
        }
        etp->e_itimer = 0;
        if (--etp->e_async_count == 0)
                cv_signal(&etp->e_async_cv);
        mutex_exit(&etp->e_ilock);
}

static void
endpnt_reclaim(zoneid_t zoneid)
{
        struct endpnt_type *np;
        struct endpnt *e;
        struct endpnt *next_node = NULL;
        list_t free_list;
        int rcnt = 0;

        list_create(&free_list, sizeof (endpnt_t), offsetof(endpnt_t, e_node));

        RPCLOG0(1, "endpnt_reclaim: reclaim callback started\n");
        rw_enter(&endpnt_type_lock, RW_READER);
        for (np = endpnt_type_list; np != NULL; np = np->e_next) {
                if (zoneid != ALL_ZONES && zoneid != np->e_zoneid)
                        continue;

                mutex_enter(&np->e_plock);
                RPCLOG(1, "endpnt_reclaim: protofmly %s, ",
                    np->e_protofmly);
                RPCLOG(1, "rdev %ld\n", np->e_rdev);
                RPCLOG(1, "endpnt_reclaim: found %d endpoint(s)\n",
                    np->e_cnt);

                if (np->e_cnt == 0) {
                        mutex_exit(&np->e_plock);
                        continue;
                }

                /*
                 * The nice thing about maintaining an idle list is that if
                 * there are any endpoints to reclaim, they are going to be
                 * on this list.  Just go through and reap the one's that
                 * have ref counts of zero.
                 */
                mutex_enter(&np->e_ilock);
                e = list_head(&np->e_ilist);
                while (e != NULL) {
                        next_node = list_next(&np->e_ilist, e);
                        mutex_enter(&e->e_lock);
                        if (e->e_ref > 0) {
                                mutex_exit(&e->e_lock);
                                e = next_node;
                                continue;
                        }
                        ASSERT(e->e_ref == 0);
                        mutex_exit(&e->e_lock);

                        list_remove(&np->e_ilist, e);
                        list_remove(&np->e_pool, e);
                        list_insert_head(&free_list, e);

                        rcnt++;
                        np->e_cnt--;
                        e = next_node;
                }
                mutex_exit(&np->e_ilock);
                /*
                 * Reset the current pointer to be safe
                 */
                if ((e = (struct endpnt *)list_head(&np->e_pool)) != NULL)
                        np->e_pcurr = e;
                else {
                        ASSERT(np->e_cnt == 0);
                        np->e_pcurr = NULL;
                }

                mutex_exit(&np->e_plock);
        }
        rw_exit(&endpnt_type_lock);

        while ((e = list_head(&free_list)) != NULL) {
                list_remove(&free_list, e);
                if (e->e_tiptr != NULL)
                        (void) t_kclose(e->e_tiptr, 1);

                cv_destroy(&e->e_cv);
                mutex_destroy(&e->e_lock);
                kmem_cache_free(endpnt_cache, e);
        }
        list_destroy(&free_list);
        RPCLOG(1, "endpnt_reclaim: reclaimed %d endpoint(s)\n", rcnt);
}

/*
 * Endpoint reclaim zones destructor callback routine.
 *
 * After reclaiming any cached entries, we basically go through the endpnt_type
 * list, canceling outstanding timeouts and free'ing data structures.
 */
/* ARGSUSED */
static void
endpnt_destructor(zoneid_t zoneid, void *a)
{
        struct endpnt_type **npp;
        struct endpnt_type *np;
        struct endpnt_type *free_list = NULL;
        timeout_id_t t_id = 0;
        extern void clcleanup_zone(zoneid_t);
        extern void clcleanup4_zone(zoneid_t);

        /* Make sure NFS client handles are released. */
        clcleanup_zone(zoneid);
        clcleanup4_zone(zoneid);

        endpnt_reclaim(zoneid);
        /*
         * We don't need to be holding on to any locks across the call to
         * endpnt_reclaim() and the code below; we know that no-one can
         * be holding open connections for this zone (all processes and kernel
         * threads are gone), so nothing could be adding anything to the list.
         */
        rw_enter(&endpnt_type_lock, RW_WRITER);
        npp = &endpnt_type_list;
        while ((np = *npp) != NULL) {
                if (np->e_zoneid != zoneid) {
                        npp = &np->e_next;
                        continue;
                }
                mutex_enter(&np->e_plock);
                mutex_enter(&np->e_ilock);
                if (np->e_itimer != 0) {
                        t_id = np->e_itimer;
                        np->e_itimer = 0;
                }
                ASSERT(np->e_cnt == 0);
                ASSERT(list_head(&np->e_pool) == NULL);
                ASSERT(list_head(&np->e_ilist) == NULL);

                mutex_exit(&np->e_ilock);
                mutex_exit(&np->e_plock);

                /*
                 * untimeout() any outstanding timers that have not yet fired.
                 */
                if (t_id != (timeout_id_t)0)
                        (void) untimeout(t_id);
                *npp = np->e_next;
                np->e_next = free_list;
                free_list = np;
        }
        rw_exit(&endpnt_type_lock);

        while (free_list != NULL) {
                np = free_list;
                free_list = free_list->e_next;
                /*
                 * Wait for threads in endpnt_taskq trying to reap endpnt_ts in
                 * the endpnt_type_t.
                 */
                mutex_enter(&np->e_ilock);
                while (np->e_async_count > 0)
                        cv_wait(&np->e_async_cv, &np->e_ilock);
                cv_destroy(&np->e_async_cv);
                mutex_destroy(&np->e_plock);
                mutex_destroy(&np->e_ilock);
                list_destroy(&np->e_pool);
                list_destroy(&np->e_ilist);
                kmem_free(np, sizeof (endpnt_type_t));
        }
}

/*
 * Endpoint reclaim kmem callback routine.
 */
/* ARGSUSED */
static void
endpnt_repossess(void *a)
{
        /*
         * Reclaim idle endpnt's from all zones.
         */
        if (endpnt_taskq != NULL)
                (void) taskq_dispatch(endpnt_taskq,
                    (task_func_t *)endpnt_reclaim, (void *)ALL_ZONES,
                    TQ_NOSLEEP);
}

/*
 * RPC request dispatch routine.  Constructs a datagram message and wraps it
 * around the RPC request to pass downstream.
 */
static int
clnt_clts_dispatch_send(queue_t *q, mblk_t *mp, struct netbuf *addr,
    calllist_t *cp, uint_t xid, cred_t *cr)
{
        mblk_t *bp;
        int msgsz;
        struct T_unitdata_req *udreq;

        /*
         * Set up the call record.
         */
        cp->call_wq = q;
        cp->call_xid = xid;
        cp->call_status = RPC_TIMEDOUT;
        cp->call_notified = FALSE;
        RPCLOG(64,
            "clnt_clts_dispatch_send: putting xid 0x%x on "
            "dispatch list\n", xid);
        cp->call_hash = call_hash(xid, clnt_clts_hash_size);
        cp->call_bucket = &clts_call_ht[cp->call_hash];
        call_table_enter(cp);

        /*
         * Construct the datagram
         */
        msgsz = (int)TUNITDATAREQSZ;
        /*
         * Note: if the receiver uses SCM_UCRED/getpeerucred the pid will
         * appear as -1.
         */
        while (!(bp = allocb_cred(msgsz + addr->len, cr, NOPID))) {
                if (strwaitbuf(msgsz + addr->len, BPRI_LO))
                        return (ENOSR);
        }

        udreq = (struct T_unitdata_req *)bp->b_wptr;
        udreq->PRIM_type = T_UNITDATA_REQ;
        udreq->DEST_length = addr->len;

        if (addr->len) {
                bcopy(addr->buf, bp->b_wptr + msgsz, addr->len);
                udreq->DEST_offset = (t_scalar_t)msgsz;
                msgsz += addr->len;
        } else
                udreq->DEST_offset = 0;
        udreq->OPT_length = 0;
        udreq->OPT_offset = 0;

        bp->b_datap->db_type = M_PROTO;
        bp->b_wptr += msgsz;

        /*
         * Link the datagram header with the actual data
         */
        linkb(bp, mp);

        /*
         * Send downstream.
         */
        if (canput(cp->call_wq)) {
                put(cp->call_wq, bp);
                return (0);
        }

        return (EIO);
}

/*
 * RPC response delivery routine.  Deliver the response to the waiting
 * thread by matching the xid.
 */
void
clnt_clts_dispatch_notify(mblk_t *mp, int resp_off, zoneid_t zoneid)
{
        calllist_t *e = NULL;
        call_table_t *chtp;
        uint32_t xid;
        uint_t hash;
        unsigned char *hdr_offset;
        mblk_t *resp;

        /*
         * If the RPC response is not contained in the same mblk as the
         * datagram header, then move to the next mblk.
         */
        hdr_offset = mp->b_rptr;
        resp = mp;
        if ((mp->b_wptr - (mp->b_rptr + resp_off)) == 0)
                resp = mp->b_cont;
        else
                resp->b_rptr += resp_off;

        ASSERT(resp != NULL);

        if ((IS_P2ALIGNED(resp->b_rptr, sizeof (uint32_t))) &&
            (resp->b_wptr - resp->b_rptr) >= sizeof (xid))
                xid = *((uint32_t *)resp->b_rptr);
        else {
                int i = 0;
                unsigned char *p = (unsigned char *)&xid;
                unsigned char *rptr;
                mblk_t *tmp = resp;

                /*
                 * Copy the xid, byte-by-byte into xid.
                 */
                while (tmp) {
                        rptr = tmp->b_rptr;
                        while (rptr < tmp->b_wptr) {
                                *p++ = *rptr++;
                                if (++i >= sizeof (xid))
                                        goto done_xid_copy;
                        }
                        tmp = tmp->b_cont;
                }

                /*
                 * If we got here, we ran out of mblk space before the
                 * xid could be copied.
                 */
                ASSERT(tmp == NULL && i < sizeof (xid));

                RPCLOG0(1,
                    "clnt_dispatch_notify(clts): message less than "
                    "size of xid\n");

                freemsg(mp);
                return;
        }

done_xid_copy:

        /*
         * Reset the read pointer back to the beginning of the protocol
         * header if we moved it.
         */
        if (mp->b_rptr != hdr_offset)
                mp->b_rptr = hdr_offset;

        hash = call_hash(xid, clnt_clts_hash_size);
        chtp = &clts_call_ht[hash];
        /* call_table_find returns with the hash bucket locked */
        call_table_find(chtp, xid, e);

        if (e != NULL) {
                mutex_enter(&e->call_lock);

                /*
                 * verify that the reply is coming in on
                 * the same zone that it was sent from.
                 */
                if (e->call_zoneid != zoneid) {
                        mutex_exit(&e->call_lock);
                        mutex_exit(&chtp->ct_lock);
                        RPCLOG0(8, "clnt_dispatch_notify (clts): incorrect "
                            "zoneid\n");
                        freemsg(mp);
                        return;
                }

                /*
                 * found thread waiting for this reply.
                 */
                if (e->call_reply) {
                        RPCLOG(8,
                            "clnt_dispatch_notify (clts): discarding old "
                            "reply for xid 0x%x\n",
                            xid);
                        freemsg(e->call_reply);
                }
                e->call_notified = TRUE;
                e->call_reply = mp;
                e->call_status = RPC_SUCCESS;
                cv_signal(&e->call_cv);
                mutex_exit(&e->call_lock);
                mutex_exit(&chtp->ct_lock);
        } else {
                zone_t *zone;
                struct rpcstat *rpcstat;

                mutex_exit(&chtp->ct_lock);
                RPCLOG(8, "clnt_dispatch_notify (clts): no caller for reply "
                    "0x%x\n", xid);
                freemsg(mp);
                /*
                 * This is unfortunate, but we need to lookup the zone so we
                 * can increment its "rcbadxids" counter.
                 */
                zone = zone_find_by_id(zoneid);
                if (zone == NULL) {
                        /*
                         * The zone went away...
                         */
                        return;
                }
                rpcstat = zone_getspecific(rpcstat_zone_key, zone);
                if (zone_status_get(zone) >= ZONE_IS_SHUTTING_DOWN) {
                        /*
                         * Not interested
                         */
                        zone_rele(zone);
                        return;
                }
                RCSTAT_INCR(rpcstat->rpc_clts_client, rcbadxids);
                zone_rele(zone);
        }
}

/*
 * Init routine.  Called when rpcmod is loaded.
 */
void
clnt_clts_init(void)
{
        endpnt_cache = kmem_cache_create("clnt_clts_endpnt_cache",
            sizeof (struct endpnt), 0, NULL, NULL, endpnt_repossess, NULL,
            NULL, 0);

        rw_init(&endpnt_type_lock, NULL, RW_DEFAULT, NULL);

        /*
         * Perform simple bounds checking to make sure that the setting is
         * reasonable
         */
        if (clnt_clts_max_endpoints <= 0) {
                if (clnt_clts_do_bindresvport)
                        clnt_clts_max_endpoints = RESERVED_PORTSPACE;
                else
                        clnt_clts_max_endpoints = NONRESERVED_PORTSPACE;
        }

        if (clnt_clts_do_bindresvport &&
            clnt_clts_max_endpoints > RESERVED_PORTSPACE)
                clnt_clts_max_endpoints = RESERVED_PORTSPACE;
        else if (clnt_clts_max_endpoints > NONRESERVED_PORTSPACE)
                clnt_clts_max_endpoints = NONRESERVED_PORTSPACE;

        if (clnt_clts_hash_size < DEFAULT_MIN_HASH_SIZE)
                clnt_clts_hash_size = DEFAULT_MIN_HASH_SIZE;

        /*
         * Defer creating the taskq until rpcmod gets pushed.  If we are
         * in diskless boot mode, rpcmod will get loaded early even before
         * thread_create() is available.
         */
        endpnt_taskq = NULL;
        taskq_created = FALSE;
        mutex_init(&endpnt_taskq_lock, NULL, MUTEX_DEFAULT, NULL);

        if (clnt_clts_endpoint_reap_interval < DEFAULT_ENDPOINT_REAP_INTERVAL)
                clnt_clts_endpoint_reap_interval =
                    DEFAULT_ENDPOINT_REAP_INTERVAL;

        /*
         * Dispatch the taskq at an interval which is offset from the
         * interval that the endpoints should be reaped.
         */
        clnt_clts_taskq_dispatch_interval =
            (clnt_clts_endpoint_reap_interval + DEFAULT_INTERVAL_SHIFT) * hz;

        /*
         * Initialize the completion queue
         */
        clts_call_ht = call_table_init(clnt_clts_hash_size);
        /*
         * Initialize the zone destructor callback.
         */
        zone_key_create(&endpnt_destructor_key, NULL, NULL, endpnt_destructor);
}

void
clnt_clts_fini(void)
{
        (void) zone_key_delete(endpnt_destructor_key);
}