8322 nl: misleading-indentation

[unleashed/tickless.git] / usr / src / uts / common / rpc / rpcmod.c

/*
 * CDDL HEADER START
 *
 * The contents of this file are subject to the terms of the
 * Common Development and Distribution License (the "License").
 * You may not use this file except in compliance with the License.
 *
 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
 * or http://www.opensolaris.org/os/licensing.
 * See the License for the specific language governing permissions
 * and limitations under the License.
 *
 * When distributing Covered Code, include this CDDL HEADER in each
 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
 * If applicable, add the following below this CDDL HEADER, with the
 * fields enclosed by brackets "[]" replaced with your own identifying
 * information: Portions Copyright [yyyy] [name of copyright owner]
 *
 * CDDL HEADER END
 */
/*
 * Copyright 2010 Sun Microsystems, Inc.  All rights reserved.
 * Use is subject to license terms.
 */
/*
 * Copyright 2012 Milan Jurik. All rights reserved.
 * Copyright 2013 Nexenta Systems, Inc.  All rights reserved.
 */
/* Copyright (c) 1990 Mentat Inc. */

/*      Copyright (c) 1984, 1986, 1987, 1988, 1989 AT&T */
/*        All Rights Reserved   */

/*
 * Kernel RPC filtering module
 */

#include <sys/param.h>
#include <sys/types.h>
#include <sys/stream.h>
#include <sys/stropts.h>
#include <sys/strsubr.h>
#include <sys/tihdr.h>
#include <sys/timod.h>
#include <sys/tiuser.h>
#include <sys/debug.h>
#include <sys/signal.h>
#include <sys/pcb.h>
#include <sys/user.h>
#include <sys/errno.h>
#include <sys/cred.h>
#include <sys/policy.h>
#include <sys/inline.h>
#include <sys/cmn_err.h>
#include <sys/kmem.h>
#include <sys/file.h>
#include <sys/sysmacros.h>
#include <sys/systm.h>
#include <sys/t_lock.h>
#include <sys/ddi.h>
#include <sys/vtrace.h>
#include <sys/callb.h>
#include <sys/strsun.h>

#include <sys/strlog.h>
#include <rpc/rpc_com.h>
#include <inet/common.h>
#include <rpc/types.h>
#include <sys/time.h>
#include <rpc/xdr.h>
#include <rpc/auth.h>
#include <rpc/clnt.h>
#include <rpc/rpc_msg.h>
#include <rpc/clnt.h>
#include <rpc/svc.h>
#include <rpc/rpcsys.h>
#include <rpc/rpc_rdma.h>

/*
 * This is the loadable module wrapper.
 */
#include <sys/conf.h>
#include <sys/modctl.h>
#include <sys/syscall.h>

extern struct streamtab rpcinfo;

static struct fmodsw fsw = {
        "rpcmod",
        &rpcinfo,
        D_NEW|D_MP,
};

/*
 * Module linkage information for the kernel.
 */

static struct modlstrmod modlstrmod = {
        &mod_strmodops, "rpc interface str mod", &fsw
};

/*
 * For the RPC system call.
 */
static struct sysent rpcsysent = {
        2,
        SE_32RVAL1 | SE_ARGC | SE_NOUNLOAD,
        rpcsys
};

static struct modlsys modlsys = {
        &mod_syscallops,
        "RPC syscall",
        &rpcsysent
};

#ifdef _SYSCALL32_IMPL
static struct modlsys modlsys32 = {
        &mod_syscallops32,
        "32-bit RPC syscall",
        &rpcsysent
};
#endif /* _SYSCALL32_IMPL */

static struct modlinkage modlinkage = {
        MODREV_1,
        {
                &modlsys,
#ifdef _SYSCALL32_IMPL
                &modlsys32,
#endif
                &modlstrmod,
                NULL
        }
};

int
_init(void)
{
        int error = 0;
        callb_id_t cid;
        int status;

        svc_init();
        clnt_init();
        cid = callb_add(connmgr_cpr_reset, 0, CB_CL_CPR_RPC, "rpc");

        if (error = mod_install(&modlinkage)) {
                /*
                 * Could not install module, cleanup previous
                 * initialization work.
                 */
                clnt_fini();
                if (cid != NULL)
                        (void) callb_delete(cid);

                return (error);
        }

        /*
         * Load up the RDMA plugins and initialize the stats. Even if the
         * plugins loadup fails, but rpcmod was successfully installed the
         * counters still get initialized.
         */
        rw_init(&rdma_lock, NULL, RW_DEFAULT, NULL);
        mutex_init(&rdma_modload_lock, NULL, MUTEX_DEFAULT, NULL);

        cv_init(&rdma_wait.svc_cv, NULL, CV_DEFAULT, NULL);
        mutex_init(&rdma_wait.svc_lock, NULL, MUTEX_DEFAULT, NULL);

        mt_kstat_init();

        /*
         * Get our identification into ldi.  This is used for loading
         * other modules, e.g. rpcib.
         */
        status = ldi_ident_from_mod(&modlinkage, &rpcmod_li);
        if (status != 0) {
                cmn_err(CE_WARN, "ldi_ident_from_mod fails with %d", status);
                rpcmod_li = NULL;
        }

        return (error);
}

/*
 * The unload entry point fails, because we advertise entry points into
 * rpcmod from the rest of kRPC: rpcmod_release().
 */
int
_fini(void)
{
        return (EBUSY);
}

int
_info(struct modinfo *modinfop)
{
        return (mod_info(&modlinkage, modinfop));
}

extern int nulldev();

#define RPCMOD_ID       2049

int rmm_open(queue_t *, dev_t *, int, int, cred_t *);
int rmm_close(queue_t *, int, cred_t *);

/*
 * To save instructions, since STREAMS ignores the return value
 * from these functions, they are defined as void here. Kind of icky, but...
 */
void rmm_rput(queue_t *, mblk_t *);
void rmm_wput(queue_t *, mblk_t *);
void rmm_rsrv(queue_t *);
void rmm_wsrv(queue_t *);

int rpcmodopen(queue_t *, dev_t *, int, int, cred_t *);
int rpcmodclose(queue_t *, int, cred_t *);
void rpcmodrput(queue_t *, mblk_t *);
void rpcmodwput(queue_t *, mblk_t *);
void rpcmodrsrv();
void rpcmodwsrv(queue_t *);

static  void    rpcmodwput_other(queue_t *, mblk_t *);
static  int     mir_close(queue_t *q);
static  int     mir_open(queue_t *q, dev_t *devp, int flag, int sflag,
                    cred_t *credp);
static  void    mir_rput(queue_t *q, mblk_t *mp);
static  void    mir_rsrv(queue_t *q);
static  void    mir_wput(queue_t *q, mblk_t *mp);
static  void    mir_wsrv(queue_t *q);

static struct module_info rpcmod_info =
        {RPCMOD_ID, "rpcmod", 0, INFPSZ, 256*1024, 1024};

static struct qinit rpcmodrinit = {
        (int (*)())rmm_rput,
        (int (*)())rmm_rsrv,
        rmm_open,
        rmm_close,
        nulldev,
        &rpcmod_info,
        NULL
};

/*
 * The write put procedure is simply putnext to conserve stack space.
 * The write service procedure is not used to queue data, but instead to
 * synchronize with flow control.
 */
static struct qinit rpcmodwinit = {
        (int (*)())rmm_wput,
        (int (*)())rmm_wsrv,
        rmm_open,
        rmm_close,
        nulldev,
        &rpcmod_info,
        NULL
};
struct streamtab rpcinfo = { &rpcmodrinit, &rpcmodwinit, NULL, NULL };

struct xprt_style_ops {
        int (*xo_open)();
        int (*xo_close)();
        void (*xo_wput)();
        void (*xo_wsrv)();
        void (*xo_rput)();
        void (*xo_rsrv)();
};

/*
 * Read side has no service procedure.
 */
static struct xprt_style_ops xprt_clts_ops = {
        rpcmodopen,
        rpcmodclose,
        rpcmodwput,
        rpcmodwsrv,
        rpcmodrput,
        NULL
};

static struct xprt_style_ops xprt_cots_ops = {
        mir_open,
        mir_close,
        mir_wput,
        mir_wsrv,
        mir_rput,
        mir_rsrv
};

/*
 * Per rpcmod "slot" data structure. q->q_ptr points to one of these.
 */
struct rpcm {
        void            *rm_krpc_cell;  /* Reserved for use by kRPC */
        struct          xprt_style_ops  *rm_ops;
        int             rm_type;        /* Client or server side stream */
#define RM_CLOSING      0x1             /* somebody is trying to close slot */
        uint_t          rm_state;       /* state of the slot. see above */
        uint_t          rm_ref;         /* cnt of external references to slot */
        kmutex_t        rm_lock;        /* mutex protecting above fields */
        kcondvar_t      rm_cwait;       /* condition for closing */
        zoneid_t        rm_zoneid;      /* zone which pushed rpcmod */
};

struct temp_slot {
        void *cell;
        struct xprt_style_ops *ops;
        int type;
        mblk_t *info_ack;
        kmutex_t lock;
        kcondvar_t wait;
};

typedef struct mir_s {
        void    *mir_krpc_cell; /* Reserved for kRPC use. This field */
                                        /* must be first in the structure. */
        struct xprt_style_ops   *rm_ops;
        int     mir_type;               /* Client or server side stream */

        mblk_t  *mir_head_mp;           /* RPC msg in progress */
                /*
                 * mir_head_mp points the first mblk being collected in
                 * the current RPC message.  Record headers are removed
                 * before data is linked into mir_head_mp.
                 */
        mblk_t  *mir_tail_mp;           /* Last mblk in mir_head_mp */
                /*
                 * mir_tail_mp points to the last mblk in the message
                 * chain starting at mir_head_mp.  It is only valid
                 * if mir_head_mp is non-NULL and is used to add new
                 * data blocks to the end of chain quickly.
                 */

        int32_t mir_frag_len;           /* Bytes seen in the current frag */
                /*
                 * mir_frag_len starts at -4 for beginning of each fragment.
                 * When this length is negative, it indicates the number of
                 * bytes that rpcmod needs to complete the record marker
                 * header.  When it is positive or zero, it holds the number
                 * of bytes that have arrived for the current fragment and
                 * are held in mir_header_mp.
                 */

        int32_t mir_frag_header;
                /*
                 * Fragment header as collected for the current fragment.
                 * It holds the last-fragment indicator and the number
                 * of bytes in the fragment.
                 */

        unsigned int
                mir_ordrel_pending : 1, /* Sent T_ORDREL_REQ */
                mir_hold_inbound : 1,   /* Hold inbound messages on server */
                                        /* side until outbound flow control */
                                        /* is relieved. */
                mir_closing : 1,        /* The stream is being closed */
                mir_inrservice : 1,     /* data queued or rd srv proc running */
                mir_inwservice : 1,     /* data queued or wr srv proc running */
                mir_inwflushdata : 1,   /* flush M_DATAs when srv runs */
                /*
                 * On client streams, mir_clntreq is 0 or 1; it is set
                 * to 1 whenever a new request is sent out (mir_wput)
                 * and cleared when the timer fires (mir_timer).  If
                 * the timer fires with this value equal to 0, then the
                 * stream is considered idle and kRPC is notified.
                 */
                mir_clntreq : 1,
                /*
                 * On server streams, stop accepting messages
                 */
                mir_svc_no_more_msgs : 1,
                mir_listen_stream : 1,  /* listen end point */
                mir_unused : 1, /* no longer used */
                mir_timer_call : 1,
                mir_junk_fill_thru_bit_31 : 21;

        int     mir_setup_complete;     /* server has initialized everything */
        timeout_id_t mir_timer_id;      /* Timer for idle checks */
        clock_t mir_idle_timeout;       /* Allowed idle time before shutdown */
                /*
                 * This value is copied from clnt_idle_timeout or
                 * svc_idle_timeout during the appropriate ioctl.
                 * Kept in milliseconds
                 */
        clock_t mir_use_timestamp;      /* updated on client with each use */
                /*
                 * This value is set to lbolt
                 * every time a client stream sends or receives data.
                 * Even if the timer message arrives, we don't shutdown
                 * client unless:
                 *    lbolt >= MSEC_TO_TICK(mir_idle_timeout)+mir_use_timestamp.
                 * This value is kept in HZ.
                 */

        uint_t  *mir_max_msg_sizep;     /* Reference to sanity check size */
                /*
                 * This pointer is set to &clnt_max_msg_size or
                 * &svc_max_msg_size during the appropriate ioctl.
                 */
        zoneid_t mir_zoneid;    /* zone which pushed rpcmod */
        /* Server-side fields. */
        int     mir_ref_cnt;            /* Reference count: server side only */
                                        /* counts the number of references */
                                        /* that a kernel RPC server thread */
                                        /* (see svc_run()) has on this rpcmod */
                                        /* slot. Effectively, it is the */
                                        /* number of unprocessed messages */
                                        /* that have been passed up to the */
                                        /* kRPC layer */

        mblk_t  *mir_svc_pend_mp;       /* Pending T_ORDREL_IND or */
                                        /* T_DISCON_IND */

        /*
         * these fields are for both client and server, but for debugging,
         * it is easier to have these last in the structure.
         */
        kmutex_t        mir_mutex;      /* Mutex and condvar for close */
        kcondvar_t      mir_condvar;    /* synchronization. */
        kcondvar_t      mir_timer_cv;   /* Timer routine sync. */
} mir_t;

void tmp_rput(queue_t *q, mblk_t *mp);

struct xprt_style_ops tmpops = {
        NULL,
        NULL,
        putnext,
        NULL,
        tmp_rput,
        NULL
};

void
tmp_rput(queue_t *q, mblk_t *mp)
{
        struct temp_slot *t = (struct temp_slot *)(q->q_ptr);
        struct T_info_ack *pptr;

        switch (mp->b_datap->db_type) {
        case M_PCPROTO:
                pptr = (struct T_info_ack *)mp->b_rptr;
                switch (pptr->PRIM_type) {
                case T_INFO_ACK:
                        mutex_enter(&t->lock);
                        t->info_ack = mp;
                        cv_signal(&t->wait);
                        mutex_exit(&t->lock);
                        return;
                default:
                        break;
                }
        default:
                break;
        }

        /*
         * Not an info-ack, so free it. This is ok because we should
         * not be receiving data until the open finishes: rpcmod
         * is pushed well before the end-point is bound to an address.
         */
        freemsg(mp);
}

int
rmm_open(queue_t *q, dev_t *devp, int flag, int sflag, cred_t *crp)
{
        mblk_t *bp;
        struct temp_slot ts, *t;
        struct T_info_ack *pptr;
        int error = 0;

        ASSERT(q != NULL);
        /*
         * Check for re-opens.
         */
        if (q->q_ptr) {
                TRACE_1(TR_FAC_KRPC, TR_RPCMODOPEN_END,
                    "rpcmodopen_end:(%s)", "q->qptr");
                return (0);
        }

        t = &ts;
        bzero(t, sizeof (*t));
        q->q_ptr = (void *)t;
        WR(q)->q_ptr = (void *)t;

        /*
         * Allocate the required messages upfront.
         */
        if ((bp = allocb_cred(sizeof (struct T_info_req) +
            sizeof (struct T_info_ack), crp, curproc->p_pid)) == NULL) {
                return (ENOBUFS);
        }

        mutex_init(&t->lock, NULL, MUTEX_DEFAULT, NULL);
        cv_init(&t->wait, NULL, CV_DEFAULT, NULL);

        t->ops = &tmpops;

        qprocson(q);
        bp->b_datap->db_type = M_PCPROTO;
        *(int32_t *)bp->b_wptr = (int32_t)T_INFO_REQ;
        bp->b_wptr += sizeof (struct T_info_req);
        putnext(WR(q), bp);

        mutex_enter(&t->lock);
        while (t->info_ack == NULL) {
                if (cv_wait_sig(&t->wait, &t->lock) == 0) {
                        error = EINTR;
                        break;
                }
        }
        mutex_exit(&t->lock);

        if (error)
                goto out;

        pptr = (struct T_info_ack *)t->info_ack->b_rptr;

        if (pptr->SERV_type == T_CLTS) {
                if ((error = rpcmodopen(q, devp, flag, sflag, crp)) == 0)
                        ((struct rpcm *)q->q_ptr)->rm_ops = &xprt_clts_ops;
        } else {
                if ((error = mir_open(q, devp, flag, sflag, crp)) == 0)
                        ((mir_t *)q->q_ptr)->rm_ops = &xprt_cots_ops;
        }

out:
        if (error)
                qprocsoff(q);

        freemsg(t->info_ack);
        mutex_destroy(&t->lock);
        cv_destroy(&t->wait);

        return (error);
}

void
rmm_rput(queue_t *q, mblk_t  *mp)
{
        (*((struct temp_slot *)q->q_ptr)->ops->xo_rput)(q, mp);
}

void
rmm_rsrv(queue_t *q)
{
        (*((struct temp_slot *)q->q_ptr)->ops->xo_rsrv)(q);
}

void
rmm_wput(queue_t *q, mblk_t *mp)
{
        (*((struct temp_slot *)q->q_ptr)->ops->xo_wput)(q, mp);
}

void
rmm_wsrv(queue_t *q)
{
        (*((struct temp_slot *)q->q_ptr)->ops->xo_wsrv)(q);
}

int
rmm_close(queue_t *q, int flag, cred_t *crp)
{
        return ((*((struct temp_slot *)q->q_ptr)->ops->xo_close)(q, flag, crp));
}

static void rpcmod_release(queue_t *, mblk_t *, bool_t);
/*
 * rpcmodopen - open routine gets called when the module gets pushed
 *              onto the stream.
 */
/*ARGSUSED*/
int
rpcmodopen(queue_t *q, dev_t *devp, int flag, int sflag, cred_t *crp)
{
        struct rpcm *rmp;

        extern void (*rpc_rele)(queue_t *, mblk_t *, bool_t);

        TRACE_0(TR_FAC_KRPC, TR_RPCMODOPEN_START, "rpcmodopen_start:");

        /*
         * Initialize entry points to release a rpcmod slot (and an input
         * message if supplied) and to send an output message to the module
         * below rpcmod.
         */
        if (rpc_rele == NULL)
                rpc_rele = rpcmod_release;

        /*
         * Only sufficiently privileged users can use this module, and it
         * is assumed that they will use this module properly, and NOT send
         * bulk data from downstream.
         */
        if (secpolicy_rpcmod_open(crp) != 0)
                return (EPERM);

        /*
         * Allocate slot data structure.
         */
        rmp = kmem_zalloc(sizeof (*rmp), KM_SLEEP);

        mutex_init(&rmp->rm_lock, NULL, MUTEX_DEFAULT, NULL);
        cv_init(&rmp->rm_cwait, NULL, CV_DEFAULT, NULL);
        rmp->rm_zoneid = rpc_zoneid();
        /*
         * slot type will be set by kRPC client and server ioctl's
         */
        rmp->rm_type = 0;

        q->q_ptr = (void *)rmp;
        WR(q)->q_ptr = (void *)rmp;

        TRACE_1(TR_FAC_KRPC, TR_RPCMODOPEN_END, "rpcmodopen_end:(%s)", "end");
        return (0);
}

/*
 * rpcmodclose - This routine gets called when the module gets popped
 * off of the stream.
 */
/*ARGSUSED*/
int
rpcmodclose(queue_t *q, int flag, cred_t *crp)
{
        struct rpcm *rmp;

        ASSERT(q != NULL);
        rmp = (struct rpcm *)q->q_ptr;

        /*
         * Mark our state as closing.
         */
        mutex_enter(&rmp->rm_lock);
        rmp->rm_state |= RM_CLOSING;

        /*
         * Check and see if there are any messages on the queue.  If so, send
         * the messages, regardless whether the downstream module is ready to
         * accept data.
         */
        if (rmp->rm_type == RPC_SERVER) {
                flushq(q, FLUSHDATA);

                qenable(WR(q));

                if (rmp->rm_ref) {
                        mutex_exit(&rmp->rm_lock);
                        /*
                         * call into SVC to clean the queue
                         */
                        svc_queueclean(q);
                        mutex_enter(&rmp->rm_lock);

                        /*
                         * Block while there are kRPC threads with a reference
                         * to this message.
                         */
                        while (rmp->rm_ref)
                                cv_wait(&rmp->rm_cwait, &rmp->rm_lock);
                }

                mutex_exit(&rmp->rm_lock);

                /*
                 * It is now safe to remove this queue from the stream. No kRPC
                 * threads have a reference to the stream, and none ever will,
                 * because RM_CLOSING is set.
                 */
                qprocsoff(q);

                /* Notify kRPC that this stream is going away. */
                svc_queueclose(q);
        } else {
                mutex_exit(&rmp->rm_lock);
                qprocsoff(q);
        }

        q->q_ptr = NULL;
        WR(q)->q_ptr = NULL;
        mutex_destroy(&rmp->rm_lock);
        cv_destroy(&rmp->rm_cwait);
        kmem_free(rmp, sizeof (*rmp));
        return (0);
}

/*
 * rpcmodrput - Module read put procedure.  This is called from
 *              the module, driver, or stream head downstream.
 */
void
rpcmodrput(queue_t *q, mblk_t *mp)
{
        struct rpcm *rmp;
        union T_primitives *pptr;
        int hdrsz;

        TRACE_0(TR_FAC_KRPC, TR_RPCMODRPUT_START, "rpcmodrput_start:");

        ASSERT(q != NULL);
        rmp = (struct rpcm *)q->q_ptr;

        if (rmp->rm_type == 0) {
                freemsg(mp);
                return;
        }

        switch (mp->b_datap->db_type) {
        default:
                putnext(q, mp);
                break;

        case M_PROTO:
        case M_PCPROTO:
                ASSERT((mp->b_wptr - mp->b_rptr) >= sizeof (int32_t));
                pptr = (union T_primitives *)mp->b_rptr;

                /*
                 * Forward this message to kRPC if it is data.
                 */
                if (pptr->type == T_UNITDATA_IND) {
                        /*
                         * Check if the module is being popped.
                         */
                        mutex_enter(&rmp->rm_lock);
                        if (rmp->rm_state & RM_CLOSING) {
                                mutex_exit(&rmp->rm_lock);
                                putnext(q, mp);
                                break;
                        }

                        switch (rmp->rm_type) {
                        case RPC_CLIENT:
                                mutex_exit(&rmp->rm_lock);
                                hdrsz = mp->b_wptr - mp->b_rptr;

                                /*
                                 * Make sure the header is sane.
                                 */
                                if (hdrsz < TUNITDATAINDSZ ||
                                    hdrsz < (pptr->unitdata_ind.OPT_length +
                                    pptr->unitdata_ind.OPT_offset) ||
                                    hdrsz < (pptr->unitdata_ind.SRC_length +
                                    pptr->unitdata_ind.SRC_offset)) {
                                        freemsg(mp);
                                        return;
                                }

                                /*
                                 * Call clnt_clts_dispatch_notify, so that it
                                 * can pass the message to the proper caller.
                                 * Don't discard the header just yet since the
                                 * client may need the sender's address.
                                 */
                                clnt_clts_dispatch_notify(mp, hdrsz,
                                    rmp->rm_zoneid);
                                return;
                        case RPC_SERVER:
                                /*
                                 * rm_krpc_cell is exclusively used by the kRPC
                                 * CLTS server. Try to submit the message to
                                 * kRPC. Since this is an unreliable channel, we
                                 * can just free the message in case the kRPC
                                 * does not accept new messages.
                                 */
                                if (rmp->rm_krpc_cell &&
                                    svc_queuereq(q, mp, TRUE)) {
                                        /*
                                         * Raise the reference count on this
                                         * module to prevent it from being
                                         * popped before kRPC generates the
                                         * reply.
                                         */
                                        rmp->rm_ref++;
                                        mutex_exit(&rmp->rm_lock);
                                } else {
                                        mutex_exit(&rmp->rm_lock);
                                        freemsg(mp);
                                }
                                return;
                        default:
                                mutex_exit(&rmp->rm_lock);
                                freemsg(mp);
                                return;
                        } /* end switch(rmp->rm_type) */
                } else if (pptr->type == T_UDERROR_IND) {
                        mutex_enter(&rmp->rm_lock);
                        hdrsz = mp->b_wptr - mp->b_rptr;

                        /*
                         * Make sure the header is sane
                         */
                        if (hdrsz < TUDERRORINDSZ ||
                            hdrsz < (pptr->uderror_ind.OPT_length +
                            pptr->uderror_ind.OPT_offset) ||
                            hdrsz < (pptr->uderror_ind.DEST_length +
                            pptr->uderror_ind.DEST_offset)) {
                                mutex_exit(&rmp->rm_lock);
                                freemsg(mp);
                                return;
                        }

                        /*
                         * In the case where a unit data error has been
                         * received, all we need to do is clear the message from
                         * the queue.
                         */
                        mutex_exit(&rmp->rm_lock);
                        freemsg(mp);
                        RPCLOG(32, "rpcmodrput: unitdata error received at "
                            "%ld\n", gethrestime_sec());
                        return;
                } /* end else if (pptr->type == T_UDERROR_IND) */

                putnext(q, mp);
                break;
        } /* end switch (mp->b_datap->db_type) */

        TRACE_0(TR_FAC_KRPC, TR_RPCMODRPUT_END,
            "rpcmodrput_end:");
        /*
         * Return codes are not looked at by the STREAMS framework.
         */
}

/*
 * write put procedure
 */
void
rpcmodwput(queue_t *q, mblk_t *mp)
{
        struct rpcm     *rmp;

        ASSERT(q != NULL);

        switch (mp->b_datap->db_type) {
                case M_PROTO:
                case M_PCPROTO:
                        break;
                default:
                        rpcmodwput_other(q, mp);
                        return;
        }

        /*
         * Check to see if we can send the message downstream.
         */
        if (canputnext(q)) {
                putnext(q, mp);
                return;
        }

        rmp = (struct rpcm *)q->q_ptr;
        ASSERT(rmp != NULL);

        /*
         * The first canputnext failed.  Try again except this time with the
         * lock held, so that we can check the state of the stream to see if
         * it is closing.  If either of these conditions evaluate to true
         * then send the meesage.
         */
        mutex_enter(&rmp->rm_lock);
        if (canputnext(q) || (rmp->rm_state & RM_CLOSING)) {
                mutex_exit(&rmp->rm_lock);
                putnext(q, mp);
        } else {
                /*
                 * canputnext failed again and the stream is not closing.
                 * Place the message on the queue and let the service
                 * procedure handle the message.
                 */
                mutex_exit(&rmp->rm_lock);
                (void) putq(q, mp);
        }
}

static void
rpcmodwput_other(queue_t *q, mblk_t *mp)
{
        struct rpcm     *rmp;
        struct iocblk   *iocp;

        rmp = (struct rpcm *)q->q_ptr;
        ASSERT(rmp != NULL);

        switch (mp->b_datap->db_type) {
                case M_IOCTL:
                        iocp = (struct iocblk *)mp->b_rptr;
                        ASSERT(iocp != NULL);
                        switch (iocp->ioc_cmd) {
                                case RPC_CLIENT:
                                case RPC_SERVER:
                                        mutex_enter(&rmp->rm_lock);
                                        rmp->rm_type = iocp->ioc_cmd;
                                        mutex_exit(&rmp->rm_lock);
                                        mp->b_datap->db_type = M_IOCACK;
                                        qreply(q, mp);
                                        return;
                                default:
                                /*
                                 * pass the ioctl downstream and hope someone
                                 * down there knows how to handle it.
                                 */
                                        putnext(q, mp);
                                        return;
                        }
                default:
                        break;
        }
        /*
         * This is something we definitely do not know how to handle, just
         * pass the message downstream
         */
        putnext(q, mp);
}

/*
 * Module write service procedure. This is called by downstream modules
 * for back enabling during flow control.
 */
void
rpcmodwsrv(queue_t *q)
{
        struct rpcm     *rmp;
        mblk_t          *mp = NULL;

        rmp = (struct rpcm *)q->q_ptr;
        ASSERT(rmp != NULL);

        /*
         * Get messages that may be queued and send them down stream
         */
        while ((mp = getq(q)) != NULL) {
                /*
                 * Optimize the service procedure for the server-side, by
                 * avoiding a call to canputnext().
                 */
                if (rmp->rm_type == RPC_SERVER || canputnext(q)) {
                        putnext(q, mp);
                        continue;
                }
                (void) putbq(q, mp);
                return;
        }
}

/* ARGSUSED */
static void
rpcmod_release(queue_t *q, mblk_t *bp, bool_t enable)
{
        struct rpcm *rmp;

        /*
         * For now, just free the message.
         */
        if (bp)
                freemsg(bp);
        rmp = (struct rpcm *)q->q_ptr;

        mutex_enter(&rmp->rm_lock);
        rmp->rm_ref--;

        if (rmp->rm_ref == 0 && (rmp->rm_state & RM_CLOSING)) {
                cv_broadcast(&rmp->rm_cwait);
        }

        mutex_exit(&rmp->rm_lock);
}

/*
 * This part of rpcmod is pushed on a connection-oriented transport for use
 * by RPC.  It serves to bypass the Stream head, implements
 * the record marking protocol, and dispatches incoming RPC messages.
 */

/* Default idle timer values */
#define MIR_CLNT_IDLE_TIMEOUT   (5 * (60 * 1000L))      /* 5 minutes */
#define MIR_SVC_IDLE_TIMEOUT    (6 * (60 * 1000L))      /* 6 minutes */
#define MIR_SVC_ORDREL_TIMEOUT  (10 * (60 * 1000L))     /* 10 minutes */
#define MIR_LASTFRAG    0x80000000      /* Record marker */

#define MIR_SVC_QUIESCED(mir)   \
        (mir->mir_ref_cnt == 0 && mir->mir_inrservice == 0)

#define MIR_CLEAR_INRSRV(mir_ptr)       {       \
        (mir_ptr)->mir_inrservice = 0;  \
        if ((mir_ptr)->mir_type == RPC_SERVER &&        \
                (mir_ptr)->mir_closing) \
                cv_signal(&(mir_ptr)->mir_condvar);     \
}

/*
 * Don't block service procedure (and mir_close) if
 * we are in the process of closing.
 */
#define MIR_WCANPUTNEXT(mir_ptr, write_q)       \
        (canputnext(write_q) || ((mir_ptr)->mir_svc_no_more_msgs == 1))

static int      mir_clnt_dup_request(queue_t *q, mblk_t *mp);
static void     mir_rput_proto(queue_t *q, mblk_t *mp);
static int      mir_svc_policy_notify(queue_t *q, int event);
static void     mir_svc_release(queue_t *wq, mblk_t *mp, bool_t);
static void     mir_svc_start(queue_t *wq);
static void     mir_svc_idle_start(queue_t *, mir_t *);
static void     mir_svc_idle_stop(queue_t *, mir_t *);
static void     mir_svc_start_close(queue_t *, mir_t *);
static void     mir_clnt_idle_do_stop(queue_t *);
static void     mir_clnt_idle_stop(queue_t *, mir_t *);
static void     mir_clnt_idle_start(queue_t *, mir_t *);
static void     mir_wput(queue_t *q, mblk_t *mp);
static void     mir_wput_other(queue_t *q, mblk_t *mp);
static void     mir_wsrv(queue_t *q);
static  void    mir_disconnect(queue_t *, mir_t *ir);
static  int     mir_check_len(queue_t *, mblk_t *);
static  void    mir_timer(void *);

extern void     (*mir_rele)(queue_t *, mblk_t *, bool_t);
extern void     (*mir_start)(queue_t *);
extern void     (*clnt_stop_idle)(queue_t *);

clock_t clnt_idle_timeout = MIR_CLNT_IDLE_TIMEOUT;
clock_t svc_idle_timeout = MIR_SVC_IDLE_TIMEOUT;

/*
 * Timeout for subsequent notifications of idle connection.  This is
 * typically used to clean up after a wedged orderly release.
 */
clock_t svc_ordrel_timeout = MIR_SVC_ORDREL_TIMEOUT; /* milliseconds */

extern  uint_t  *clnt_max_msg_sizep;
extern  uint_t  *svc_max_msg_sizep;
uint_t  clnt_max_msg_size = RPC_MAXDATASIZE;
uint_t  svc_max_msg_size = RPC_MAXDATASIZE;
uint_t  mir_krpc_cell_null;

static void
mir_timer_stop(mir_t *mir)
{
        timeout_id_t tid;

        ASSERT(MUTEX_HELD(&mir->mir_mutex));

        /*
         * Since the mir_mutex lock needs to be released to call
         * untimeout(), we need to make sure that no other thread
         * can start/stop the timer (changing mir_timer_id) during
         * that time.  The mir_timer_call bit and the mir_timer_cv
         * condition variable are used to synchronize this.  Setting
         * mir_timer_call also tells mir_timer() (refer to the comments
         * in mir_timer()) that it does not need to do anything.
         */
        while (mir->mir_timer_call)
                cv_wait(&mir->mir_timer_cv, &mir->mir_mutex);
        mir->mir_timer_call = B_TRUE;

        if ((tid = mir->mir_timer_id) != 0) {
                mir->mir_timer_id = 0;
                mutex_exit(&mir->mir_mutex);
                (void) untimeout(tid);
                mutex_enter(&mir->mir_mutex);
        }
        mir->mir_timer_call = B_FALSE;
        cv_broadcast(&mir->mir_timer_cv);
}

static void
mir_timer_start(queue_t *q, mir_t *mir, clock_t intrvl)
{
        timeout_id_t tid;

        ASSERT(MUTEX_HELD(&mir->mir_mutex));

        while (mir->mir_timer_call)
                cv_wait(&mir->mir_timer_cv, &mir->mir_mutex);
        mir->mir_timer_call = B_TRUE;

        if ((tid = mir->mir_timer_id) != 0) {
                mutex_exit(&mir->mir_mutex);
                (void) untimeout(tid);
                mutex_enter(&mir->mir_mutex);
        }
        /* Only start the timer when it is not closing. */
        if (!mir->mir_closing) {
                mir->mir_timer_id = timeout(mir_timer, q,
                    MSEC_TO_TICK(intrvl));
        }
        mir->mir_timer_call = B_FALSE;
        cv_broadcast(&mir->mir_timer_cv);
}

static int
mir_clnt_dup_request(queue_t *q, mblk_t *mp)
{
        mblk_t  *mp1;
        uint32_t  new_xid;
        uint32_t  old_xid;

        ASSERT(MUTEX_HELD(&((mir_t *)q->q_ptr)->mir_mutex));
        new_xid = BE32_TO_U32(&mp->b_rptr[4]);
        /*
         * This loop is a bit tacky -- it walks the STREAMS list of
         * flow-controlled messages.
         */
        if ((mp1 = q->q_first) != NULL) {
                do {
                        old_xid = BE32_TO_U32(&mp1->b_rptr[4]);
                        if (new_xid == old_xid)
                                return (1);
                } while ((mp1 = mp1->b_next) != NULL);
        }
        return (0);
}

static int
mir_close(queue_t *q)
{
        mir_t   *mir = q->q_ptr;
        mblk_t  *mp;
        bool_t queue_cleaned = FALSE;

        RPCLOG(32, "rpcmod: mir_close of q 0x%p\n", (void *)q);
        ASSERT(MUTEX_NOT_HELD(&mir->mir_mutex));
        mutex_enter(&mir->mir_mutex);
        if ((mp = mir->mir_head_mp) != NULL) {
                mir->mir_head_mp = NULL;
                mir->mir_tail_mp = NULL;
                freemsg(mp);
        }
        /*
         * Set mir_closing so we get notified when MIR_SVC_QUIESCED()
         * is TRUE.  And mir_timer_start() won't start the timer again.
         */
        mir->mir_closing = B_TRUE;
        mir_timer_stop(mir);

        if (mir->mir_type == RPC_SERVER) {
                flushq(q, FLUSHDATA);   /* Ditch anything waiting on read q */

                /*
                 * This will prevent more requests from arriving and
                 * will force rpcmod to ignore flow control.
                 */
                mir_svc_start_close(WR(q), mir);

                while ((!MIR_SVC_QUIESCED(mir)) || mir->mir_inwservice == 1) {

                        if (mir->mir_ref_cnt && !mir->mir_inrservice &&
                            (queue_cleaned == FALSE)) {
                                /*
                                 * call into SVC to clean the queue
                                 */
                                mutex_exit(&mir->mir_mutex);
                                svc_queueclean(q);
                                queue_cleaned = TRUE;
                                mutex_enter(&mir->mir_mutex);
                                continue;
                        }

                        /*
                         * Bugid 1253810 - Force the write service
                         * procedure to send its messages, regardless
                         * whether the downstream  module is ready
                         * to accept data.
                         */
                        if (mir->mir_inwservice == 1)
                                qenable(WR(q));

                        cv_wait(&mir->mir_condvar, &mir->mir_mutex);
                }

                mutex_exit(&mir->mir_mutex);
                qprocsoff(q);

                /* Notify kRPC that this stream is going away. */
                svc_queueclose(q);
        } else {
                mutex_exit(&mir->mir_mutex);
                qprocsoff(q);
        }

        mutex_destroy(&mir->mir_mutex);
        cv_destroy(&mir->mir_condvar);
        cv_destroy(&mir->mir_timer_cv);
        kmem_free(mir, sizeof (mir_t));
        return (0);
}

/*
 * This is server side only (RPC_SERVER).
 *
 * Exit idle mode.
 */
static void
mir_svc_idle_stop(queue_t *q, mir_t *mir)
{
        ASSERT(MUTEX_HELD(&mir->mir_mutex));
        ASSERT((q->q_flag & QREADR) == 0);
        ASSERT(mir->mir_type == RPC_SERVER);
        RPCLOG(16, "rpcmod: mir_svc_idle_stop of q 0x%p\n", (void *)q);

        mir_timer_stop(mir);
}

/*
 * This is server side only (RPC_SERVER).
 *
 * Start idle processing, which will include setting idle timer if the
 * stream is not being closed.
 */
static void
mir_svc_idle_start(queue_t *q, mir_t *mir)
{
        ASSERT(MUTEX_HELD(&mir->mir_mutex));
        ASSERT((q->q_flag & QREADR) == 0);
        ASSERT(mir->mir_type == RPC_SERVER);
        RPCLOG(16, "rpcmod: mir_svc_idle_start q 0x%p\n", (void *)q);

        /*
         * Don't re-start idle timer if we are closing queues.
         */
        if (mir->mir_closing) {
                RPCLOG(16, "mir_svc_idle_start - closing: 0x%p\n",
                    (void *)q);

                /*
                 * We will call mir_svc_idle_start() whenever MIR_SVC_QUIESCED()
                 * is true.  When it is true, and we are in the process of
                 * closing the stream, signal any thread waiting in
                 * mir_close().
                 */
                if (mir->mir_inwservice == 0)
                        cv_signal(&mir->mir_condvar);

        } else {
                RPCLOG(16, "mir_svc_idle_start - reset %s timer\n",
                    mir->mir_ordrel_pending ? "ordrel" : "normal");
                /*
                 * Normal condition, start the idle timer.  If an orderly
                 * release has been sent, set the timeout to wait for the
                 * client to close its side of the connection.  Otherwise,
                 * use the normal idle timeout.
                 */
                mir_timer_start(q, mir, mir->mir_ordrel_pending ?
                    svc_ordrel_timeout : mir->mir_idle_timeout);
        }
}

/* ARGSUSED */
static int
mir_open(queue_t *q, dev_t *devp, int flag, int sflag, cred_t *credp)
{
        mir_t   *mir;

        RPCLOG(32, "rpcmod: mir_open of q 0x%p\n", (void *)q);
        /* Set variables used directly by kRPC. */
        if (!mir_rele)
                mir_rele = mir_svc_release;
        if (!mir_start)
                mir_start = mir_svc_start;
        if (!clnt_stop_idle)
                clnt_stop_idle = mir_clnt_idle_do_stop;
        if (!clnt_max_msg_sizep)
                clnt_max_msg_sizep = &clnt_max_msg_size;
        if (!svc_max_msg_sizep)
                svc_max_msg_sizep = &svc_max_msg_size;

        /* Allocate a zero'ed out mir structure for this stream. */
        mir = kmem_zalloc(sizeof (mir_t), KM_SLEEP);

        /*
         * We set hold inbound here so that incoming messages will
         * be held on the read-side queue until the stream is completely
         * initialized with a RPC_CLIENT or RPC_SERVER ioctl.  During
         * the ioctl processing, the flag is cleared and any messages that
         * arrived between the open and the ioctl are delivered to kRPC.
         *
         * Early data should never arrive on a client stream since
         * servers only respond to our requests and we do not send any.
         * until after the stream is initialized.  Early data is
         * very common on a server stream where the client will start
         * sending data as soon as the connection is made (and this
         * is especially true with TCP where the protocol accepts the
         * connection before nfsd or kRPC is notified about it).
         */

        mir->mir_hold_inbound = 1;

        /*
         * Start the record marker looking for a 4-byte header.  When
         * this length is negative, it indicates that rpcmod is looking
         * for bytes to consume for the record marker header.  When it
         * is positive, it holds the number of bytes that have arrived
         * for the current fragment and are being held in mir_header_mp.
         */

        mir->mir_frag_len = -(int32_t)sizeof (uint32_t);

        mir->mir_zoneid = rpc_zoneid();
        mutex_init(&mir->mir_mutex, NULL, MUTEX_DEFAULT, NULL);
        cv_init(&mir->mir_condvar, NULL, CV_DRIVER, NULL);
        cv_init(&mir->mir_timer_cv, NULL, CV_DRIVER, NULL);

        q->q_ptr = (char *)mir;
        WR(q)->q_ptr = (char *)mir;

        /*
         * We noenable the read-side queue because we don't want it
         * automatically enabled by putq.  We enable it explicitly
         * in mir_wsrv when appropriate. (See additional comments on
         * flow control at the beginning of mir_rsrv.)
         */
        noenable(q);

        qprocson(q);
        return (0);
}

/*
 * Read-side put routine for both the client and server side.  Does the
 * record marking for incoming RPC messages, and when complete, dispatches
 * the message to either the client or server.
 */
static void
mir_rput(queue_t *q, mblk_t *mp)
{
        int     excess;
        int32_t frag_len, frag_header;
        mblk_t  *cont_mp, *head_mp, *tail_mp, *mp1;
        mir_t   *mir = q->q_ptr;
        boolean_t stop_timer = B_FALSE;

        ASSERT(mir != NULL);

        /*
         * If the stream has not been set up as a RPC_CLIENT or RPC_SERVER
         * with the corresponding ioctl, then don't accept
         * any inbound data.  This should never happen for streams
         * created by nfsd or client-side kRPC because they are careful
         * to set the mode of the stream before doing anything else.
         */
        if (mir->mir_type == 0) {
                freemsg(mp);
                return;
        }

        ASSERT(MUTEX_NOT_HELD(&mir->mir_mutex));

        switch (mp->b_datap->db_type) {
        case M_DATA:
                break;
        case M_PROTO:
        case M_PCPROTO:
                if (MBLKL(mp) < sizeof (t_scalar_t)) {
                        RPCLOG(1, "mir_rput: runt TPI message (%d bytes)\n",
                            (int)MBLKL(mp));
                        freemsg(mp);
                        return;
                }
                if (((union T_primitives *)mp->b_rptr)->type != T_DATA_IND) {
                        mir_rput_proto(q, mp);
                        return;
                }

                /* Throw away the T_DATA_IND block and continue with data. */
                mp1 = mp;
                mp = mp->b_cont;
                freeb(mp1);
                break;
        case M_SETOPTS:
                /*
                 * If a module on the stream is trying set the Stream head's
                 * high water mark, then set our hiwater to the requested
                 * value.  We are the "stream head" for all inbound
                 * data messages since messages are passed directly to kRPC.
                 */
                if (MBLKL(mp) >= sizeof (struct stroptions)) {
                        struct stroptions       *stropts;

                        stropts = (struct stroptions *)mp->b_rptr;
                        if ((stropts->so_flags & SO_HIWAT) &&
                            !(stropts->so_flags & SO_BAND)) {
                                (void) strqset(q, QHIWAT, 0, stropts->so_hiwat);
                        }
                }
                putnext(q, mp);
                return;
        case M_FLUSH:
                RPCLOG(32, "mir_rput: ignoring M_FLUSH %x ", *mp->b_rptr);
                RPCLOG(32, "on q 0x%p\n", (void *)q);
                putnext(q, mp);
                return;
        default:
                putnext(q, mp);
                return;
        }

        mutex_enter(&mir->mir_mutex);

        /*
         * If this connection is closing, don't accept any new messages.
         */
        if (mir->mir_svc_no_more_msgs) {
                ASSERT(mir->mir_type == RPC_SERVER);
                mutex_exit(&mir->mir_mutex);
                freemsg(mp);
                return;
        }

        /* Get local copies for quicker access. */
        frag_len = mir->mir_frag_len;
        frag_header = mir->mir_frag_header;
        head_mp = mir->mir_head_mp;
        tail_mp = mir->mir_tail_mp;

        /* Loop, processing each message block in the mp chain separately. */
        do {
                cont_mp = mp->b_cont;
                mp->b_cont = NULL;

                /*
                 * Drop zero-length mblks to prevent unbounded kernel memory
                 * consumption.
                 */
                if (MBLKL(mp) == 0) {
                        freeb(mp);
                        continue;
                }

                /*
                 * If frag_len is negative, we're still in the process of
                 * building frag_header -- try to complete it with this mblk.
                 */
                while (frag_len < 0 && mp->b_rptr < mp->b_wptr) {
                        frag_len++;
                        frag_header <<= 8;
                        frag_header += *mp->b_rptr++;
                }

                if (MBLKL(mp) == 0 && frag_len < 0) {
                        /*
                         * We consumed this mblk while trying to complete the
                         * fragment header.  Free it and move on.
                         */
                        freeb(mp);
                        continue;
                }

                ASSERT(frag_len >= 0);

                /*
                 * Now frag_header has the number of bytes in this fragment
                 * and we're just waiting to collect them all.  Chain our
                 * latest mblk onto the list and see if we now have enough
                 * bytes to complete the fragment.
                 */
                if (head_mp == NULL) {
                        ASSERT(tail_mp == NULL);
                        head_mp = tail_mp = mp;
                } else {
                        tail_mp->b_cont = mp;
                        tail_mp = mp;
                }

                frag_len += MBLKL(mp);
                excess = frag_len - (frag_header & ~MIR_LASTFRAG);
                if (excess < 0) {
                        /*
                         * We still haven't received enough data to complete
                         * the fragment, so continue on to the next mblk.
                         */
                        continue;
                }

                /*
                 * We've got a complete fragment.  If there are excess bytes,
                 * then they're part of the next fragment's header (of either
                 * this RPC message or the next RPC message).  Split that part
                 * into its own mblk so that we can safely freeb() it when
                 * building frag_header above.
                 */
                if (excess > 0) {
                        if ((mp1 = dupb(mp)) == NULL &&
                            (mp1 = copyb(mp)) == NULL) {
                                freemsg(head_mp);
                                freemsg(cont_mp);
                                RPCLOG0(1, "mir_rput: dupb/copyb failed\n");
                                mir->mir_frag_header = 0;
                                mir->mir_frag_len = -(int32_t)sizeof (uint32_t);
                                mir->mir_head_mp = NULL;
                                mir->mir_tail_mp = NULL;
                                mir_disconnect(q, mir); /* drops mir_mutex */
                                return;
                        }

                        /*
                         * Relink the message chain so that the next mblk is
                         * the next fragment header, followed by the rest of
                         * the message chain.
                         */
                        mp1->b_cont = cont_mp;
                        cont_mp = mp1;

                        /*
                         * Data in the new mblk begins at the next fragment,
                         * and data in the old mblk ends at the next fragment.
                         */
                        mp1->b_rptr = mp1->b_wptr - excess;
                        mp->b_wptr -= excess;
                }

                /*
                 * Reset frag_len and frag_header for the next fragment.
                 */
                frag_len = -(int32_t)sizeof (uint32_t);
                if (!(frag_header & MIR_LASTFRAG)) {
                        /*
                         * The current fragment is complete, but more
                         * fragments need to be processed before we can
                         * pass along the RPC message headed at head_mp.
                         */
                        frag_header = 0;
                        continue;
                }
                frag_header = 0;

                /*
                 * We've got a complete RPC message; pass it to the
                 * appropriate consumer.
                 */
                switch (mir->mir_type) {
                case RPC_CLIENT:
                        if (clnt_dispatch_notify(head_mp, mir->mir_zoneid)) {
                                /*
                                 * Mark this stream as active.  This marker
                                 * is used in mir_timer().
                                 */
                                mir->mir_clntreq = 1;
                                mir->mir_use_timestamp = ddi_get_lbolt();
                        } else {
                                freemsg(head_mp);
                        }
                        break;

                case RPC_SERVER:
                        /*
                         * Check for flow control before passing the
                         * message to kRPC.
                         */
                        if (!mir->mir_hold_inbound) {
                                if (mir->mir_krpc_cell) {

                                        if (mir_check_len(q, head_mp))
                                                return;

                                        if (q->q_first == NULL &&
                                            svc_queuereq(q, head_mp, TRUE)) {
                                                /*
                                                 * If the reference count is 0
                                                 * (not including this
                                                 * request), then the stream is
                                                 * transitioning from idle to
                                                 * non-idle.  In this case, we
                                                 * cancel the idle timer.
                                                 */
                                                if (mir->mir_ref_cnt++ == 0)
                                                        stop_timer = B_TRUE;
                                        } else {
                                                (void) putq(q, head_mp);
                                                mir->mir_inrservice = B_TRUE;
                                        }
                                } else {
                                        /*
                                         * Count # of times this happens. Should
                                         * be never, but experience shows
                                         * otherwise.
                                         */
                                        mir_krpc_cell_null++;
                                        freemsg(head_mp);
                                }
                        } else {
                                /*
                                 * If the outbound side of the stream is
                                 * flow controlled, then hold this message
                                 * until client catches up. mir_hold_inbound
                                 * is set in mir_wput and cleared in mir_wsrv.
                                 */
                                (void) putq(q, head_mp);
                                mir->mir_inrservice = B_TRUE;
                        }
                        break;
                default:
                        RPCLOG(1, "mir_rput: unknown mir_type %d\n",
                            mir->mir_type);
                        freemsg(head_mp);
                        break;
                }

                /*
                 * Reset the chain since we're starting on a new RPC message.
                 */
                head_mp = tail_mp = NULL;
        } while ((mp = cont_mp) != NULL);

        /*
         * Sanity check the message length; if it's too large mir_check_len()
         * will shutdown the connection, drop mir_mutex, and return non-zero.
         */
        if (head_mp != NULL && mir->mir_setup_complete &&
            mir_check_len(q, head_mp))
                return;

        /* Save our local copies back in the mir structure. */
        mir->mir_frag_header = frag_header;
        mir->mir_frag_len = frag_len;
        mir->mir_head_mp = head_mp;
        mir->mir_tail_mp = tail_mp;

        /*
         * The timer is stopped after the whole message chain is processed.
         * The reason is that stopping the timer releases the mir_mutex
         * lock temporarily.  This means that the request can be serviced
         * while we are still processing the message chain.  This is not
         * good.  So we stop the timer here instead.
         *
         * Note that if the timer fires before we stop it, it will not
         * do any harm as MIR_SVC_QUIESCED() is false and mir_timer()
         * will just return.
         */
        if (stop_timer) {
                RPCLOG(16, "mir_rput: stopping idle timer on 0x%p because "
                    "ref cnt going to non zero\n", (void *)WR(q));
                mir_svc_idle_stop(WR(q), mir);
        }
        mutex_exit(&mir->mir_mutex);
}

static void
mir_rput_proto(queue_t *q, mblk_t *mp)
{
        mir_t   *mir = (mir_t *)q->q_ptr;
        uint32_t        type;
        uint32_t reason = 0;

        ASSERT(MUTEX_NOT_HELD(&mir->mir_mutex));

        type = ((union T_primitives *)mp->b_rptr)->type;
        switch (mir->mir_type) {
        case RPC_CLIENT:
                switch (type) {
                case T_DISCON_IND:
                        reason = ((struct T_discon_ind *)
                            (mp->b_rptr))->DISCON_reason;
                        /*FALLTHROUGH*/
                case T_ORDREL_IND:
                        mutex_enter(&mir->mir_mutex);
                        if (mir->mir_head_mp) {
                                freemsg(mir->mir_head_mp);
                                mir->mir_head_mp = (mblk_t *)0;
                                mir->mir_tail_mp = (mblk_t *)0;
                        }
                        /*
                         * We are disconnecting, but not necessarily
                         * closing. By not closing, we will fail to
                         * pick up a possibly changed global timeout value,
                         * unless we store it now.
                         */
                        mir->mir_idle_timeout = clnt_idle_timeout;
                        mir_clnt_idle_stop(WR(q), mir);

                        /*
                         * Even though we are unconnected, we still
                         * leave the idle timer going on the client. The
                         * reason for is that if we've disconnected due
                         * to a server-side disconnect, reset, or connection
                         * timeout, there is a possibility the client may
                         * retry the RPC request. This retry needs to done on
                         * the same bound address for the server to interpret
                         * it as such. However, we don't want
                         * to wait forever for that possibility. If the
                         * end-point stays unconnected for mir_idle_timeout
                         * units of time, then that is a signal to the
                         * connection manager to give up waiting for the
                         * application (eg. NFS) to send a retry.
                         */
                        mir_clnt_idle_start(WR(q), mir);
                        mutex_exit(&mir->mir_mutex);
                        clnt_dispatch_notifyall(WR(q), type, reason);
                        freemsg(mp);
                        return;
                case T_ERROR_ACK:
                {
                        struct T_error_ack      *terror;

                        terror = (struct T_error_ack *)mp->b_rptr;
                        RPCLOG(1, "mir_rput_proto T_ERROR_ACK for queue 0x%p",
                            (void *)q);
                        RPCLOG(1, " ERROR_prim: %s,",
                            rpc_tpiprim2name(terror->ERROR_prim));
                        RPCLOG(1, " TLI_error: %s,",
                            rpc_tpierr2name(terror->TLI_error));
                        RPCLOG(1, " UNIX_error: %d\n", terror->UNIX_error);
                        if (terror->ERROR_prim == T_DISCON_REQ)  {
                                clnt_dispatch_notifyall(WR(q), type, reason);
                                freemsg(mp);
                                return;
                        } else {
                                if (clnt_dispatch_notifyconn(WR(q), mp))
                                        return;
                        }
                        break;
                }
                case T_OK_ACK:
                {
                        struct T_ok_ack *tok = (struct T_ok_ack *)mp->b_rptr;

                        if (tok->CORRECT_prim == T_DISCON_REQ) {
                                clnt_dispatch_notifyall(WR(q), type, reason);
                                freemsg(mp);
                                return;
                        } else {
                                if (clnt_dispatch_notifyconn(WR(q), mp))
                                        return;
                        }
                        break;
                }
                case T_CONN_CON:
                case T_INFO_ACK:
                case T_OPTMGMT_ACK:
                        if (clnt_dispatch_notifyconn(WR(q), mp))
                                return;
                        break;
                case T_BIND_ACK:
                        break;
                default:
                        RPCLOG(1, "mir_rput: unexpected message %d "
                            "for kRPC client\n",
                            ((union T_primitives *)mp->b_rptr)->type);
                        break;
                }
                break;

        case RPC_SERVER:
                switch (type) {
                case T_BIND_ACK:
                {
                        struct T_bind_ack       *tbind;

                        /*
                         * If this is a listening stream, then shut
                         * off the idle timer.
                         */
                        tbind = (struct T_bind_ack *)mp->b_rptr;
                        if (tbind->CONIND_number > 0) {
                                mutex_enter(&mir->mir_mutex);
                                mir_svc_idle_stop(WR(q), mir);

                                /*
                                 * mark this as a listen endpoint
                                 * for special handling.
                                 */

                                mir->mir_listen_stream = 1;
                                mutex_exit(&mir->mir_mutex);
                        }
                        break;
                }
                case T_DISCON_IND:
                case T_ORDREL_IND:
                        RPCLOG(16, "mir_rput_proto: got %s indication\n",
                            type == T_DISCON_IND ? "disconnect"
                            : "orderly release");

                        /*
                         * For listen endpoint just pass
                         * on the message.
                         */

                        if (mir->mir_listen_stream)
                                break;

                        mutex_enter(&mir->mir_mutex);

                        /*
                         * If client wants to break off connection, record
                         * that fact.
                         */
                        mir_svc_start_close(WR(q), mir);

                        /*
                         * If we are idle, then send the orderly release
                         * or disconnect indication to nfsd.
                         */
                        if (MIR_SVC_QUIESCED(mir)) {
                                mutex_exit(&mir->mir_mutex);
                                break;
                        }

                        RPCLOG(16, "mir_rput_proto: not idle, so "
                            "disconnect/ord rel indication not passed "
                            "upstream on 0x%p\n", (void *)q);

                        /*
                         * Hold the indication until we get idle
                         * If there already is an indication stored,
                         * replace it if the new one is a disconnect. The
                         * reasoning is that disconnection takes less time
                         * to process, and once a client decides to
                         * disconnect, we should do that.
                         */
                        if (mir->mir_svc_pend_mp) {
                                if (type == T_DISCON_IND) {
                                        RPCLOG(16, "mir_rput_proto: replacing"
                                            " held disconnect/ord rel"
                                            " indication with disconnect on"
                                            " 0x%p\n", (void *)q);

                                        freemsg(mir->mir_svc_pend_mp);
                                        mir->mir_svc_pend_mp = mp;
                                } else {
                                        RPCLOG(16, "mir_rput_proto: already "
                                            "held a disconnect/ord rel "
                                            "indication. freeing ord rel "
                                            "ind on 0x%p\n", (void *)q);
                                        freemsg(mp);
                                }
                        } else
                                mir->mir_svc_pend_mp = mp;

                        mutex_exit(&mir->mir_mutex);
                        return;

                default:
                        /* nfsd handles server-side non-data messages. */
                        break;
                }
                break;

        default:
                break;
        }

        putnext(q, mp);
}

/*
 * The server-side read queues are used to hold inbound messages while
 * outbound flow control is exerted.  When outbound flow control is
 * relieved, mir_wsrv qenables the read-side queue.  Read-side queues
 * are not enabled by STREAMS and are explicitly noenable'ed in mir_open.
 */
static void
mir_rsrv(queue_t *q)
{
        mir_t   *mir;
        mblk_t  *mp;
        boolean_t stop_timer = B_FALSE;

        mir = (mir_t *)q->q_ptr;
        mutex_enter(&mir->mir_mutex);

        mp = NULL;
        switch (mir->mir_type) {
        case RPC_SERVER:
                if (mir->mir_ref_cnt == 0)
                        mir->mir_hold_inbound = 0;
                if (mir->mir_hold_inbound)
                        break;

                while (mp = getq(q)) {
                        if (mir->mir_krpc_cell &&
                            (mir->mir_svc_no_more_msgs == 0)) {

                                if (mir_check_len(q, mp))
                                        return;

                                if (svc_queuereq(q, mp, TRUE)) {
                                        /*
                                         * If we were idle, turn off idle timer
                                         * since we aren't idle any more.
                                         */
                                        if (mir->mir_ref_cnt++ == 0)
                                                stop_timer = B_TRUE;
                                } else {
                                        (void) putbq(q, mp);
                                        break;
                                }
                        } else {
                                /*
                                 * Count # of times this happens. Should be
                                 * never, but experience shows otherwise.
                                 */
                                if (mir->mir_krpc_cell == NULL)
                                        mir_krpc_cell_null++;
                                freemsg(mp);
                        }
                }
                break;
        case RPC_CLIENT:
                break;
        default:
                RPCLOG(1, "mir_rsrv: unexpected mir_type %d\n", mir->mir_type);

                if (q->q_first == NULL)
                        MIR_CLEAR_INRSRV(mir);

                mutex_exit(&mir->mir_mutex);

                return;
        }

        /*
         * The timer is stopped after all the messages are processed.
         * The reason is that stopping the timer releases the mir_mutex
         * lock temporarily.  This means that the request can be serviced
         * while we are still processing the message queue.  This is not
         * good.  So we stop the timer here instead.
         */
        if (stop_timer)  {
                RPCLOG(16, "mir_rsrv stopping idle timer on 0x%p because ref "
                    "cnt going to non zero\n", (void *)WR(q));
                mir_svc_idle_stop(WR(q), mir);
        }

        if (q->q_first == NULL) {
                mblk_t  *cmp = NULL;

                MIR_CLEAR_INRSRV(mir);

                if (mir->mir_type == RPC_SERVER && MIR_SVC_QUIESCED(mir)) {
                        cmp = mir->mir_svc_pend_mp;
                        mir->mir_svc_pend_mp = NULL;
                }

                mutex_exit(&mir->mir_mutex);

                if (cmp != NULL) {
                        RPCLOG(16, "mir_rsrv: line %d: sending a held "
                            "disconnect/ord rel indication upstream\n",
                            __LINE__);
                        putnext(q, cmp);
                }

                return;
        }
        mutex_exit(&mir->mir_mutex);
}

static int mir_svc_policy_fails;

/*
 * Called to send an event code to nfsd/lockd so that it initiates
 * connection close.
 */
static int
mir_svc_policy_notify(queue_t *q, int event)
{
        mblk_t  *mp;
#ifdef DEBUG
        mir_t *mir = (mir_t *)q->q_ptr;
        ASSERT(MUTEX_NOT_HELD(&mir->mir_mutex));
#endif
        ASSERT(q->q_flag & QREADR);

        /*
         * Create an M_DATA message with the event code and pass it to the
         * Stream head (nfsd or whoever created the stream will consume it).
         */
        mp = allocb(sizeof (int), BPRI_HI);

        if (!mp) {

                mir_svc_policy_fails++;
                RPCLOG(16, "mir_svc_policy_notify: could not allocate event "
                    "%d\n", event);
                return (ENOMEM);
        }

        U32_TO_BE32(event, mp->b_rptr);
        mp->b_wptr = mp->b_rptr + sizeof (int);
        putnext(q, mp);
        return (0);
}

/*
 * Server side: start the close phase. We want to get this rpcmod slot in an
 * idle state before mir_close() is called.
 */
static void
mir_svc_start_close(queue_t *wq, mir_t *mir)
{
        ASSERT(MUTEX_HELD(&mir->mir_mutex));
        ASSERT((wq->q_flag & QREADR) == 0);
        ASSERT(mir->mir_type == RPC_SERVER);

        /*
         * Do not accept any more messages.
         */
        mir->mir_svc_no_more_msgs = 1;

        /*
         * Next two statements will make the read service procedure
         * free everything stuck in the streams read queue.
         * It's not necessary because enabling the write queue will
         * have the same effect, but why not speed the process along?
         */
        mir->mir_hold_inbound = 0;
        qenable(RD(wq));

        /*
         * Meanwhile force the write service procedure to send the
         * responses downstream, regardless of flow control.
         */
        qenable(wq);
}

/*
 * This routine is called directly by kRPC after a request is completed,
 * whether a reply was sent or the request was dropped.
 */
static void
mir_svc_release(queue_t *wq, mblk_t *mp, bool_t enable)
{
        mir_t   *mir = (mir_t *)wq->q_ptr;
        mblk_t  *cmp = NULL;

        ASSERT((wq->q_flag & QREADR) == 0);
        if (mp)
                freemsg(mp);

        if (enable)
                qenable(RD(wq));

        mutex_enter(&mir->mir_mutex);

        /*
         * Start idle processing if this is the last reference.
         */
        if ((mir->mir_ref_cnt == 1) && (mir->mir_inrservice == 0)) {
                cmp = mir->mir_svc_pend_mp;
                mir->mir_svc_pend_mp = NULL;
        }

        if (cmp) {
                RPCLOG(16, "mir_svc_release: sending a held "
                    "disconnect/ord rel indication upstream on queue 0x%p\n",
                    (void *)RD(wq));

                mutex_exit(&mir->mir_mutex);

                putnext(RD(wq), cmp);

                mutex_enter(&mir->mir_mutex);
        }

        /*
         * Start idle processing if this is the last reference.
         */
        if (mir->mir_ref_cnt == 1 && mir->mir_inrservice == 0) {

                RPCLOG(16, "mir_svc_release starting idle timer on 0x%p "
                    "because ref cnt is zero\n", (void *) wq);

                mir_svc_idle_start(wq, mir);
        }

        mir->mir_ref_cnt--;
        ASSERT(mir->mir_ref_cnt >= 0);

        /*
         * Wake up the thread waiting to close.
         */

        if ((mir->mir_ref_cnt == 0) && mir->mir_closing)
                cv_signal(&mir->mir_condvar);

        mutex_exit(&mir->mir_mutex);
}

/*
 * This routine is called by server-side kRPC when it is ready to
 * handle inbound messages on the stream.
 */
static void
mir_svc_start(queue_t *wq)
{
        mir_t   *mir = (mir_t *)wq->q_ptr;

        /*
         * no longer need to take the mir_mutex because the
         * mir_setup_complete field has been moved out of
         * the binary field protected by the mir_mutex.
         */

        mir->mir_setup_complete = 1;
        qenable(RD(wq));
}

/*
 * client side wrapper for stopping timer with normal idle timeout.
 */
static void
mir_clnt_idle_stop(queue_t *wq, mir_t *mir)
{
        ASSERT(MUTEX_HELD(&mir->mir_mutex));
        ASSERT((wq->q_flag & QREADR) == 0);
        ASSERT(mir->mir_type == RPC_CLIENT);

        mir_timer_stop(mir);
}

/*
 * client side wrapper for stopping timer with normal idle timeout.
 */
static void
mir_clnt_idle_start(queue_t *wq, mir_t *mir)
{
        ASSERT(MUTEX_HELD(&mir->mir_mutex));
        ASSERT((wq->q_flag & QREADR) == 0);
        ASSERT(mir->mir_type == RPC_CLIENT);

        mir_timer_start(wq, mir, mir->mir_idle_timeout);
}

/*
 * client side only. Forces rpcmod to stop sending T_ORDREL_REQs on
 * end-points that aren't connected.
 */
static void
mir_clnt_idle_do_stop(queue_t *wq)
{
        mir_t   *mir = (mir_t *)wq->q_ptr;

        RPCLOG(1, "mir_clnt_idle_do_stop: wq 0x%p\n", (void *)wq);
        ASSERT(MUTEX_NOT_HELD(&mir->mir_mutex));
        mutex_enter(&mir->mir_mutex);
        mir_clnt_idle_stop(wq, mir);
        mutex_exit(&mir->mir_mutex);
}

/*
 * Timer handler.  It handles idle timeout and memory shortage problem.
 */
static void
mir_timer(void *arg)
{
        queue_t *wq = (queue_t *)arg;
        mir_t *mir = (mir_t *)wq->q_ptr;
        boolean_t notify;
        clock_t now;

        mutex_enter(&mir->mir_mutex);

        /*
         * mir_timer_call is set only when either mir_timer_[start|stop]
         * is progressing.  And mir_timer() can only be run while they
         * are progressing if the timer is being stopped.  So just
         * return.
         */
        if (mir->mir_timer_call) {
                mutex_exit(&mir->mir_mutex);
                return;
        }
        mir->mir_timer_id = 0;

        switch (mir->mir_type) {
        case RPC_CLIENT:

                /*
                 * For clients, the timer fires at clnt_idle_timeout
                 * intervals.  If the activity marker (mir_clntreq) is
                 * zero, then the stream has been idle since the last
                 * timer event and we notify kRPC.  If mir_clntreq is
                 * non-zero, then the stream is active and we just
                 * restart the timer for another interval.  mir_clntreq
                 * is set to 1 in mir_wput for every request passed
                 * downstream.
                 *
                 * If this was a memory shortage timer reset the idle
                 * timeout regardless; the mir_clntreq will not be a
                 * valid indicator.
                 *
                 * The timer is initially started in mir_wput during
                 * RPC_CLIENT ioctl processing.
                 *
                 * The timer interval can be changed for individual
                 * streams with the ND variable "mir_idle_timeout".
                 */
                now = ddi_get_lbolt();
                if (mir->mir_clntreq > 0 && mir->mir_use_timestamp +
                    MSEC_TO_TICK(mir->mir_idle_timeout) - now >= 0) {
                        clock_t tout;

                        tout = mir->mir_idle_timeout -
                            TICK_TO_MSEC(now - mir->mir_use_timestamp);
                        if (tout < 0)
                                tout = 1000;
#if 0
                        printf("mir_timer[%d < %d + %d]: reset client timer "
                            "to %d (ms)\n", TICK_TO_MSEC(now),
                            TICK_TO_MSEC(mir->mir_use_timestamp),
                            mir->mir_idle_timeout, tout);
#endif
                        mir->mir_clntreq = 0;
                        mir_timer_start(wq, mir, tout);
                        mutex_exit(&mir->mir_mutex);
                        return;
                }
#if 0
printf("mir_timer[%d]: doing client timeout\n", now / hz);
#endif
                /*
                 * We are disconnecting, but not necessarily
                 * closing. By not closing, we will fail to
                 * pick up a possibly changed global timeout value,
                 * unless we store it now.
                 */
                mir->mir_idle_timeout = clnt_idle_timeout;
                mir_clnt_idle_start(wq, mir);

                mutex_exit(&mir->mir_mutex);
                /*
                 * We pass T_ORDREL_REQ as an integer value
                 * to kRPC as the indication that the stream
                 * is idle.  This is not a T_ORDREL_REQ message,
                 * it is just a convenient value since we call
                 * the same kRPC routine for T_ORDREL_INDs and
                 * T_DISCON_INDs.
                 */
                clnt_dispatch_notifyall(wq, T_ORDREL_REQ, 0);
                return;

        case RPC_SERVER:

                /*
                 * For servers, the timer is only running when the stream
                 * is really idle or memory is short.  The timer is started
                 * by mir_wput when mir_type is set to RPC_SERVER and
                 * by mir_svc_idle_start whenever the stream goes idle
                 * (mir_ref_cnt == 0).  The timer is cancelled in
                 * mir_rput whenever a new inbound request is passed to kRPC
                 * and the stream was previously idle.
                 *
                 * The timer interval can be changed for individual
                 * streams with the ND variable "mir_idle_timeout".
                 *
                 * If the stream is not idle do nothing.
                 */
                if (!MIR_SVC_QUIESCED(mir)) {
                        mutex_exit(&mir->mir_mutex);
                        return;
                }

                notify = !mir->mir_inrservice;
                mutex_exit(&mir->mir_mutex);

                /*
                 * If there is no packet queued up in read queue, the stream
                 * is really idle so notify nfsd to close it.
                 */
                if (notify) {
                        RPCLOG(16, "mir_timer: telling stream head listener "
                            "to close stream (0x%p)\n", (void *) RD(wq));
                        (void) mir_svc_policy_notify(RD(wq), 1);
                }
                return;
        default:
                RPCLOG(1, "mir_timer: unexpected mir_type %d\n",
                    mir->mir_type);
                mutex_exit(&mir->mir_mutex);
                return;
        }
}

/*
 * Called by the RPC package to send either a call or a return, or a
 * transport connection request.  Adds the record marking header.
 */
static void
mir_wput(queue_t *q, mblk_t *mp)
{
        uint_t  frag_header;
        mir_t   *mir = (mir_t *)q->q_ptr;
        uchar_t *rptr = mp->b_rptr;

        if (!mir) {
                freemsg(mp);
                return;
        }

        if (mp->b_datap->db_type != M_DATA) {
                mir_wput_other(q, mp);
                return;
        }

        if (mir->mir_ordrel_pending == 1) {
                freemsg(mp);
                RPCLOG(16, "mir_wput wq 0x%p: got data after T_ORDREL_REQ\n",
                    (void *)q);
                return;
        }

        frag_header = (uint_t)DLEN(mp);
        frag_header |= MIR_LASTFRAG;

        /* Stick in the 4 byte record marking header. */
        if ((rptr - mp->b_datap->db_base) < sizeof (uint32_t) ||
            !IS_P2ALIGNED(mp->b_rptr, sizeof (uint32_t))) {
                /*
                 * Since we know that M_DATA messages are created exclusively
                 * by kRPC, we expect that kRPC will leave room for our header
                 * and 4 byte align which is normal for XDR.
                 * If kRPC (or someone else) does not cooperate, then we
                 * just throw away the message.
                 */
                RPCLOG(1, "mir_wput: kRPC did not leave space for record "
                    "fragment header (%d bytes left)\n",
                    (int)(rptr - mp->b_datap->db_base));
                freemsg(mp);
                return;
        }
        rptr -= sizeof (uint32_t);
        *(uint32_t *)rptr = htonl(frag_header);
        mp->b_rptr = rptr;

        mutex_enter(&mir->mir_mutex);
        if (mir->mir_type == RPC_CLIENT) {
                /*
                 * For the client, set mir_clntreq to indicate that the
                 * connection is active.
                 */
                mir->mir_clntreq = 1;
                mir->mir_use_timestamp = ddi_get_lbolt();
        }

        /*
         * If we haven't already queued some data and the downstream module
         * can accept more data, send it on, otherwise we queue the message
         * and take other actions depending on mir_type.
         */
        if (!mir->mir_inwservice && MIR_WCANPUTNEXT(mir, q)) {
                mutex_exit(&mir->mir_mutex);

                /*
                 * Now we pass the RPC message downstream.
                 */
                putnext(q, mp);
                return;
        }

        switch (mir->mir_type) {
        case RPC_CLIENT:
                /*
                 * Check for a previous duplicate request on the
                 * queue.  If there is one, then we throw away
                 * the current message and let the previous one
                 * go through.  If we can't find a duplicate, then
                 * send this one.  This tap dance is an effort
                 * to reduce traffic and processing requirements
                 * under load conditions.
                 */
                if (mir_clnt_dup_request(q, mp)) {
                        mutex_exit(&mir->mir_mutex);
                        freemsg(mp);
                        return;
                }
                break;
        case RPC_SERVER:
                /*
                 * Set mir_hold_inbound so that new inbound RPC
                 * messages will be held until the client catches
                 * up on the earlier replies.  This flag is cleared
                 * in mir_wsrv after flow control is relieved;
                 * the read-side queue is also enabled at that time.
                 */
                mir->mir_hold_inbound = 1;
                break;
        default:
                RPCLOG(1, "mir_wput: unexpected mir_type %d\n", mir->mir_type);
                break;
        }
        mir->mir_inwservice = 1;
        (void) putq(q, mp);
        mutex_exit(&mir->mir_mutex);
}

static void
mir_wput_other(queue_t *q, mblk_t *mp)
{
        mir_t   *mir = (mir_t *)q->q_ptr;
        struct iocblk   *iocp;
        uchar_t *rptr = mp->b_rptr;
        bool_t  flush_in_svc = FALSE;

        ASSERT(MUTEX_NOT_HELD(&mir->mir_mutex));
        switch (mp->b_datap->db_type) {
        case M_IOCTL:
                iocp = (struct iocblk *)rptr;
                switch (iocp->ioc_cmd) {
                case RPC_CLIENT:
                        mutex_enter(&mir->mir_mutex);
                        if (mir->mir_type != 0 &&
                            mir->mir_type != iocp->ioc_cmd) {
ioc_eperm:
                                mutex_exit(&mir->mir_mutex);
                                iocp->ioc_error = EPERM;
                                iocp->ioc_count = 0;
                                mp->b_datap->db_type = M_IOCACK;
                                qreply(q, mp);
                                return;
                        }

                        mir->mir_type = iocp->ioc_cmd;

                        /*
                         * Clear mir_hold_inbound which was set to 1 by
                         * mir_open.  This flag is not used on client
                         * streams.
                         */
                        mir->mir_hold_inbound = 0;
                        mir->mir_max_msg_sizep = &clnt_max_msg_size;

                        /*
                         * Start the idle timer.  See mir_timer() for more
                         * information on how client timers work.
                         */
                        mir->mir_idle_timeout = clnt_idle_timeout;
                        mir_clnt_idle_start(q, mir);
                        mutex_exit(&mir->mir_mutex);

                        mp->b_datap->db_type = M_IOCACK;
                        qreply(q, mp);
                        return;
                case RPC_SERVER:
                        mutex_enter(&mir->mir_mutex);
                        if (mir->mir_type != 0 &&
                            mir->mir_type != iocp->ioc_cmd)
                                goto ioc_eperm;

                        /*
                         * We don't clear mir_hold_inbound here because
                         * mir_hold_inbound is used in the flow control
                         * model. If we cleared it here, then we'd commit
                         * a small violation to the model where the transport
                         * might immediately block downstream flow.
                         */

                        mir->mir_type = iocp->ioc_cmd;
                        mir->mir_max_msg_sizep = &svc_max_msg_size;

                        /*
                         * Start the idle timer.  See mir_timer() for more
                         * information on how server timers work.
                         *
                         * Note that it is important to start the idle timer
                         * here so that connections time out even if we
                         * never receive any data on them.
                         */
                        mir->mir_idle_timeout = svc_idle_timeout;
                        RPCLOG(16, "mir_wput_other starting idle timer on 0x%p "
                            "because we got RPC_SERVER ioctl\n", (void *)q);
                        mir_svc_idle_start(q, mir);
                        mutex_exit(&mir->mir_mutex);

                        mp->b_datap->db_type = M_IOCACK;
                        qreply(q, mp);
                        return;
                default:
                        break;
                }
                break;

        case M_PROTO:
                if (mir->mir_type == RPC_CLIENT) {
                        /*
                         * We are likely being called from the context of a
                         * service procedure. So we need to enqueue. However
                         * enqueing may put our message behind data messages.
                         * So flush the data first.
                         */
                        flush_in_svc = TRUE;
                }
                if ((mp->b_wptr - rptr) < sizeof (uint32_t) ||
                    !IS_P2ALIGNED(rptr, sizeof (uint32_t)))
                        break;

                switch (((union T_primitives *)rptr)->type) {
                case T_DATA_REQ:
                        /* Don't pass T_DATA_REQ messages downstream. */
                        freemsg(mp);
                        return;
                case T_ORDREL_REQ:
                        RPCLOG(8, "mir_wput_other wq 0x%p: got T_ORDREL_REQ\n",
                            (void *)q);
                        mutex_enter(&mir->mir_mutex);
                        if (mir->mir_type != RPC_SERVER) {
                                /*
                                 * We are likely being called from
                                 * clnt_dispatch_notifyall(). Sending
                                 * a T_ORDREL_REQ will result in
                                 * a some kind of _IND message being sent,
                                 * will be another call to
                                 * clnt_dispatch_notifyall(). To keep the stack
                                 * lean, queue this message.
                                 */
                                mir->mir_inwservice = 1;
                                (void) putq(q, mp);
                                mutex_exit(&mir->mir_mutex);
                                return;
                        }

                        /*
                         * Mark the structure such that we don't accept any
                         * more requests from client. We could defer this
                         * until we actually send the orderly release
                         * request downstream, but all that does is delay
                         * the closing of this stream.
                         */
                        RPCLOG(16, "mir_wput_other wq 0x%p: got T_ORDREL_REQ "
                            " so calling mir_svc_start_close\n", (void *)q);

                        mir_svc_start_close(q, mir);

                        /*
                         * If we have sent down a T_ORDREL_REQ, don't send
                         * any more.
                         */
                        if (mir->mir_ordrel_pending) {
                                freemsg(mp);
                                mutex_exit(&mir->mir_mutex);
                                return;
                        }

                        /*
                         * If the stream is not idle, then we hold the
                         * orderly release until it becomes idle.  This
                         * ensures that kRPC will be able to reply to
                         * all requests that we have passed to it.
                         *
                         * We also queue the request if there is data already
                         * queued, because we cannot allow the T_ORDREL_REQ
                         * to go before data. When we had a separate reply
                         * count, this was not a problem, because the
                         * reply count was reconciled when mir_wsrv()
                         * completed.
                         */
                        if (!MIR_SVC_QUIESCED(mir) ||
                            mir->mir_inwservice == 1) {
                                mir->mir_inwservice = 1;
                                (void) putq(q, mp);

                                RPCLOG(16, "mir_wput_other: queuing "
                                    "T_ORDREL_REQ on 0x%p\n", (void *)q);

                                mutex_exit(&mir->mir_mutex);
                                return;
                        }

                        /*
                         * Mark the structure so that we know we sent
                         * an orderly release request, and reset the idle timer.
                         */
                        mir->mir_ordrel_pending = 1;

                        RPCLOG(16, "mir_wput_other: calling mir_svc_idle_start"
                            " on 0x%p because we got T_ORDREL_REQ\n",
                            (void *)q);

                        mir_svc_idle_start(q, mir);
                        mutex_exit(&mir->mir_mutex);

                        /*
                         * When we break, we will putnext the T_ORDREL_REQ.
                         */
                        break;

                case T_CONN_REQ:
                        mutex_enter(&mir->mir_mutex);
                        if (mir->mir_head_mp != NULL) {
                                freemsg(mir->mir_head_mp);
                                mir->mir_head_mp = NULL;
                                mir->mir_tail_mp = NULL;
                        }
                        mir->mir_frag_len = -(int32_t)sizeof (uint32_t);
                        /*
                         * Restart timer in case mir_clnt_idle_do_stop() was
                         * called.
                         */
                        mir->mir_idle_timeout = clnt_idle_timeout;
                        mir_clnt_idle_stop(q, mir);
                        mir_clnt_idle_start(q, mir);
                        mutex_exit(&mir->mir_mutex);
                        break;

                default:
                        /*
                         * T_DISCON_REQ is one of the interesting default
                         * cases here. Ideally, an M_FLUSH is done before
                         * T_DISCON_REQ is done. However, that is somewhat
                         * cumbersome for clnt_cots.c to do. So we queue
                         * T_DISCON_REQ, and let the service procedure
                         * flush all M_DATA.
                         */
                        break;
                }
                /* fallthru */;
        default:
                if (mp->b_datap->db_type >= QPCTL) {
                        if (mp->b_datap->db_type == M_FLUSH) {
                                if (mir->mir_type == RPC_CLIENT &&
                                    *mp->b_rptr & FLUSHW) {
                                        RPCLOG(32, "mir_wput_other: flushing "
                                            "wq 0x%p\n", (void *)q);
                                        if (*mp->b_rptr & FLUSHBAND) {
                                                flushband(q, *(mp->b_rptr + 1),
                                                    FLUSHDATA);
                                        } else {
                                                flushq(q, FLUSHDATA);
                                        }
                                } else {
                                        RPCLOG(32, "mir_wput_other: ignoring "
                                            "M_FLUSH on wq 0x%p\n", (void *)q);
                                }
                        }
                        break;
                }

                mutex_enter(&mir->mir_mutex);
                if (mir->mir_inwservice == 0 && MIR_WCANPUTNEXT(mir, q)) {
                        mutex_exit(&mir->mir_mutex);
                        break;
                }
                mir->mir_inwservice = 1;
                mir->mir_inwflushdata = flush_in_svc;
                (void) putq(q, mp);
                mutex_exit(&mir->mir_mutex);
                qenable(q);

                return;
        }
        putnext(q, mp);
}

static void
mir_wsrv(queue_t *q)
{
        mblk_t  *mp;
        mir_t   *mir;
        bool_t flushdata;

        mir = (mir_t *)q->q_ptr;
        mutex_enter(&mir->mir_mutex);

        flushdata = mir->mir_inwflushdata;
        mir->mir_inwflushdata = 0;

        while (mp = getq(q)) {
                if (mp->b_datap->db_type == M_DATA) {
                        /*
                         * Do not send any more data if we have sent
                         * a T_ORDREL_REQ.
                         */
                        if (flushdata || mir->mir_ordrel_pending == 1) {
                                freemsg(mp);
                                continue;
                        }

                        /*
                         * Make sure that the stream can really handle more
                         * data.
                         */
                        if (!MIR_WCANPUTNEXT(mir, q)) {
                                (void) putbq(q, mp);
                                mutex_exit(&mir->mir_mutex);
                                return;
                        }

                        /*
                         * Now we pass the RPC message downstream.
                         */
                        mutex_exit(&mir->mir_mutex);
                        putnext(q, mp);
                        mutex_enter(&mir->mir_mutex);
                        continue;
                }

                /*
                 * This is not an RPC message, pass it downstream
                 * (ignoring flow control) if the server side is not sending a
                 * T_ORDREL_REQ downstream.
                 */
                if (mir->mir_type != RPC_SERVER ||
                    ((union T_primitives *)mp->b_rptr)->type !=
                    T_ORDREL_REQ) {
                        mutex_exit(&mir->mir_mutex);
                        putnext(q, mp);
                        mutex_enter(&mir->mir_mutex);
                        continue;
                }

                if (mir->mir_ordrel_pending == 1) {
                        /*
                         * Don't send two T_ORDRELs
                         */
                        freemsg(mp);
                        continue;
                }

                /*
                 * Mark the structure so that we know we sent an orderly
                 * release request.  We will check to see slot is idle at the
                 * end of this routine, and if so, reset the idle timer to
                 * handle orderly release timeouts.
                 */
                mir->mir_ordrel_pending = 1;
                RPCLOG(16, "mir_wsrv: sending ordrel req on q 0x%p\n",
                    (void *)q);
                /*
                 * Send the orderly release downstream. If there are other
                 * pending replies we won't be able to send them.  However,
                 * the only reason we should send the orderly release is if
                 * we were idle, or if an unusual event occurred.
                 */
                mutex_exit(&mir->mir_mutex);
                putnext(q, mp);
                mutex_enter(&mir->mir_mutex);
        }

        if (q->q_first == NULL)
                /*
                 * If we call mir_svc_idle_start() below, then
                 * clearing mir_inwservice here will also result in
                 * any thread waiting in mir_close() to be signaled.
                 */
                mir->mir_inwservice = 0;

        if (mir->mir_type != RPC_SERVER) {
                mutex_exit(&mir->mir_mutex);
                return;
        }

        /*
         * If idle we call mir_svc_idle_start to start the timer (or wakeup
         * a close). Also make sure not to start the idle timer on the
         * listener stream. This can cause nfsd to send an orderly release
         * command on the listener stream.
         */
        if (MIR_SVC_QUIESCED(mir) && !(mir->mir_listen_stream)) {
                RPCLOG(16, "mir_wsrv: calling mir_svc_idle_start on 0x%p "
                    "because mir slot is idle\n", (void *)q);
                mir_svc_idle_start(q, mir);
        }

        /*
         * If outbound flow control has been relieved, then allow new
         * inbound requests to be processed.
         */
        if (mir->mir_hold_inbound) {
                mir->mir_hold_inbound = 0;
                qenable(RD(q));
        }
        mutex_exit(&mir->mir_mutex);
}

static void
mir_disconnect(queue_t *q, mir_t *mir)
{
        ASSERT(MUTEX_HELD(&mir->mir_mutex));

        switch (mir->mir_type) {
        case RPC_CLIENT:
                /*
                 * We are disconnecting, but not necessarily
                 * closing. By not closing, we will fail to
                 * pick up a possibly changed global timeout value,
                 * unless we store it now.
                 */
                mir->mir_idle_timeout = clnt_idle_timeout;
                mir_clnt_idle_start(WR(q), mir);
                mutex_exit(&mir->mir_mutex);

                /*
                 * T_DISCON_REQ is passed to kRPC as an integer value
                 * (this is not a TPI message).  It is used as a
                 * convenient value to indicate a sanity check
                 * failure -- the same kRPC routine is also called
                 * for T_DISCON_INDs and T_ORDREL_INDs.
                 */
                clnt_dispatch_notifyall(WR(q), T_DISCON_REQ, 0);
                break;

        case RPC_SERVER:
                mir->mir_svc_no_more_msgs = 1;
                mir_svc_idle_stop(WR(q), mir);
                mutex_exit(&mir->mir_mutex);
                RPCLOG(16, "mir_disconnect: telling "
                    "stream head listener to disconnect stream "
                    "(0x%p)\n", (void *) q);
                (void) mir_svc_policy_notify(q, 2);
                break;

        default:
                mutex_exit(&mir->mir_mutex);
                break;
        }
}

/*
 * Sanity check the message length, and if it's too large, shutdown the
 * connection.  Returns 1 if the connection is shutdown; 0 otherwise.
 */
static int
mir_check_len(queue_t *q, mblk_t *head_mp)
{
        mir_t *mir = q->q_ptr;
        uint_t maxsize = 0;
        size_t msg_len = msgdsize(head_mp);

        if (mir->mir_max_msg_sizep != NULL)
                maxsize = *mir->mir_max_msg_sizep;

        if (maxsize == 0 || msg_len <= maxsize)
                return (0);

        freemsg(head_mp);
        mir->mir_head_mp = NULL;
        mir->mir_tail_mp = NULL;
        mir->mir_frag_header = 0;
        mir->mir_frag_len = -(int32_t)sizeof (uint32_t);
        if (mir->mir_type != RPC_SERVER || mir->mir_setup_complete) {
                cmn_err(CE_NOTE,
                    "kRPC: record fragment from %s of size(%lu) exceeds "
                    "maximum (%u). Disconnecting",
                    (mir->mir_type == RPC_CLIENT) ? "server" :
                    (mir->mir_type == RPC_SERVER) ? "client" :
                    "test tool", msg_len, maxsize);
        }

        mir_disconnect(q, mir);
        return (1);
}