8322 nl: misleading-indentation

[unleashed/tickless.git] / usr / src / uts / i86pc / io / pcplusmp / apic_common.c

/*
 * CDDL HEADER START
 *
 * The contents of this file are subject to the terms of the
 * Common Development and Distribution License (the "License").
 * You may not use this file except in compliance with the License.
 *
 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
 * or http://www.opensolaris.org/os/licensing.
 * See the License for the specific language governing permissions
 * and limitations under the License.
 *
 * When distributing Covered Code, include this CDDL HEADER in each
 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
 * If applicable, add the following below this CDDL HEADER, with the
 * fields enclosed by brackets "[]" replaced with your own identifying
 * information: Portions Copyright [yyyy] [name of copyright owner]
 *
 * CDDL HEADER END
 */

/*
 * Copyright (c) 2010, Oracle and/or its affiliates. All rights reserved.
 */
/*
 * Copyright (c) 2013, Joyent, Inc.  All rights reserved.
 * Copyright (c) 2016 by Delphix. All rights reserved.
 */

/*
 * PSMI 1.1 extensions are supported only in 2.6 and later versions.
 * PSMI 1.2 extensions are supported only in 2.7 and later versions.
 * PSMI 1.3 and 1.4 extensions are supported in Solaris 10.
 * PSMI 1.5 extensions are supported in Solaris Nevada.
 * PSMI 1.6 extensions are supported in Solaris Nevada.
 * PSMI 1.7 extensions are supported in Solaris Nevada.
 */
#define PSMI_1_7

#include <sys/processor.h>
#include <sys/time.h>
#include <sys/psm.h>
#include <sys/smp_impldefs.h>
#include <sys/cram.h>
#include <sys/acpi/acpi.h>
#include <sys/acpica.h>
#include <sys/psm_common.h>
#include <sys/apic.h>
#include <sys/pit.h>
#include <sys/ddi.h>
#include <sys/sunddi.h>
#include <sys/ddi_impldefs.h>
#include <sys/pci.h>
#include <sys/promif.h>
#include <sys/x86_archext.h>
#include <sys/cpc_impl.h>
#include <sys/uadmin.h>
#include <sys/panic.h>
#include <sys/debug.h>
#include <sys/archsystm.h>
#include <sys/trap.h>
#include <sys/machsystm.h>
#include <sys/sysmacros.h>
#include <sys/cpuvar.h>
#include <sys/rm_platter.h>
#include <sys/privregs.h>
#include <sys/note.h>
#include <sys/pci_intr_lib.h>
#include <sys/spl.h>
#include <sys/clock.h>
#include <sys/dditypes.h>
#include <sys/sunddi.h>
#include <sys/x_call.h>
#include <sys/reboot.h>
#include <sys/hpet.h>
#include <sys/apic_common.h>
#include <sys/apic_timer.h>

static void     apic_record_ioapic_rdt(void *intrmap_private,
                    ioapic_rdt_t *irdt);
static void     apic_record_msi(void *intrmap_private, msi_regs_t *mregs);

/*
 * Common routines between pcplusmp & apix (taken from apic.c).
 */

int     apic_clkinit(int);
hrtime_t apic_gethrtime(void);
void    apic_send_ipi(int, int);
void    apic_set_idlecpu(processorid_t);
void    apic_unset_idlecpu(processorid_t);
void    apic_shutdown(int, int);
void    apic_preshutdown(int, int);
processorid_t   apic_get_next_processorid(processorid_t);

hrtime_t apic_gettime();

enum apic_ioapic_method_type apix_mul_ioapic_method = APIC_MUL_IOAPIC_PCPLUSMP;

/* Now the ones for Dynamic Interrupt distribution */
int     apic_enable_dynamic_migration = 0;

/* maximum loop count when sending Start IPIs. */
int apic_sipi_max_loop_count = 0x1000;

/*
 * These variables are frequently accessed in apic_intr_enter(),
 * apic_intr_exit and apic_setspl, so group them together
 */
volatile uint32_t *apicadr =  NULL;     /* virtual addr of local APIC   */
int apic_setspl_delay = 1;              /* apic_setspl - delay enable   */
int apic_clkvect;

/* vector at which error interrupts come in */
int apic_errvect;
int apic_enable_error_intr = 1;
int apic_error_display_delay = 100;

/* vector at which performance counter overflow interrupts come in */
int apic_cpcovf_vect;
int apic_enable_cpcovf_intr = 1;

/* vector at which CMCI interrupts come in */
int apic_cmci_vect;
extern int cmi_enable_cmci;
extern void cmi_cmci_trap(void);

kmutex_t cmci_cpu_setup_lock;   /* protects cmci_cpu_setup_registered */
int cmci_cpu_setup_registered;

/* number of CPUs in power-on transition state */
static int apic_poweron_cnt = 0;
lock_t apic_mode_switch_lock;

/*
 * Patchable global variables.
 */
int     apic_forceload = 0;

int     apic_coarse_hrtime = 1;         /* 0 - use accurate slow gethrtime() */

int     apic_flat_model = 0;            /* 0 - clustered. 1 - flat */
int     apic_panic_on_nmi = 0;
int     apic_panic_on_apic_error = 0;

int     apic_verbose = 0;       /* 0x1ff */

#ifdef DEBUG
int     apic_debug = 0;
int     apic_restrict_vector = 0;

int     apic_debug_msgbuf[APIC_DEBUG_MSGBUFSIZE];
int     apic_debug_msgbufindex = 0;

#endif /* DEBUG */

uint_t apic_nticks = 0;
uint_t apic_skipped_redistribute = 0;

uint_t last_count_read = 0;
lock_t  apic_gethrtime_lock;
volatile int    apic_hrtime_stamp = 0;
volatile hrtime_t apic_nsec_since_boot = 0;

static  hrtime_t        apic_last_hrtime = 0;
int             apic_hrtime_error = 0;
int             apic_remote_hrterr = 0;
int             apic_num_nmis = 0;
int             apic_apic_error = 0;
int             apic_num_apic_errors = 0;
int             apic_num_cksum_errors = 0;

int     apic_error = 0;

static  int     apic_cmos_ssb_set = 0;

/* use to make sure only one cpu handles the nmi */
lock_t  apic_nmi_lock;
/* use to make sure only one cpu handles the error interrupt */
lock_t  apic_error_lock;

static  struct {
        uchar_t cntl;
        uchar_t data;
} aspen_bmc[] = {
        { CC_SMS_WR_START,      0x18 },         /* NetFn/LUN */
        { CC_SMS_WR_NEXT,       0x24 },         /* Cmd SET_WATCHDOG_TIMER */
        { CC_SMS_WR_NEXT,       0x84 },         /* DataByte 1: SMS/OS no log */
        { CC_SMS_WR_NEXT,       0x2 },          /* DataByte 2: Power Down */
        { CC_SMS_WR_NEXT,       0x0 },          /* DataByte 3: no pre-timeout */
        { CC_SMS_WR_NEXT,       0x0 },          /* DataByte 4: timer expir. */
        { CC_SMS_WR_NEXT,       0xa },          /* DataByte 5: init countdown */
        { CC_SMS_WR_END,        0x0 },          /* DataByte 6: init countdown */

        { CC_SMS_WR_START,      0x18 },         /* NetFn/LUN */
        { CC_SMS_WR_END,        0x22 }          /* Cmd RESET_WATCHDOG_TIMER */
};

static  struct {
        int     port;
        uchar_t data;
} sitka_bmc[] = {
        { SMS_COMMAND_REGISTER, SMS_WRITE_START },
        { SMS_DATA_REGISTER,    0x18 },         /* NetFn/LUN */
        { SMS_DATA_REGISTER,    0x24 },         /* Cmd SET_WATCHDOG_TIMER */
        { SMS_DATA_REGISTER,    0x84 },         /* DataByte 1: SMS/OS no log */
        { SMS_DATA_REGISTER,    0x2 },          /* DataByte 2: Power Down */
        { SMS_DATA_REGISTER,    0x0 },          /* DataByte 3: no pre-timeout */
        { SMS_DATA_REGISTER,    0x0 },          /* DataByte 4: timer expir. */
        { SMS_DATA_REGISTER,    0xa },          /* DataByte 5: init countdown */
        { SMS_COMMAND_REGISTER, SMS_WRITE_END },
        { SMS_DATA_REGISTER,    0x0 },          /* DataByte 6: init countdown */

        { SMS_COMMAND_REGISTER, SMS_WRITE_START },
        { SMS_DATA_REGISTER,    0x18 },         /* NetFn/LUN */
        { SMS_COMMAND_REGISTER, SMS_WRITE_END },
        { SMS_DATA_REGISTER,    0x22 }          /* Cmd RESET_WATCHDOG_TIMER */
};

/* Patchable global variables. */
int             apic_kmdb_on_nmi = 0;           /* 0 - no, 1 - yes enter kmdb */
uint32_t        apic_divide_reg_init = 0;       /* 0 - divide by 2 */

/* default apic ops without interrupt remapping */
static apic_intrmap_ops_t apic_nointrmap_ops = {
        (int (*)(int))return_instr,
        (void (*)(int))return_instr,
        (void (*)(void **, dev_info_t *, uint16_t, int, uchar_t))return_instr,
        (void (*)(void *, void *, uint16_t, int))return_instr,
        (void (*)(void **))return_instr,
        apic_record_ioapic_rdt,
        apic_record_msi,
};

apic_intrmap_ops_t *apic_vt_ops = &apic_nointrmap_ops;
apic_cpus_info_t        *apic_cpus = NULL;
cpuset_t        apic_cpumask;
uint_t          apic_picinit_called;

/* Flag to indicate that we need to shut down all processors */
static uint_t   apic_shutdown_processors;

/*
 * Probe the ioapic method for apix module. Called in apic_probe_common()
 */
int
apic_ioapic_method_probe()
{
        if (apix_enable == 0)
                return (PSM_SUCCESS);

        /*
         * Set IOAPIC EOI handling method. The priority from low to high is:
         *      1. IOxAPIC: with EOI register
         *      2. IOMMU interrupt mapping
         *      3. Mask-Before-EOI method for systems without boot
         *      interrupt routing, such as systems with only one IOAPIC;
         *      NVIDIA CK8-04/MCP55 systems; systems with bridge solution
         *      which disables the boot interrupt routing already.
         *      4. Directed EOI
         */
        if (apic_io_ver[0] >= 0x20)
                apix_mul_ioapic_method = APIC_MUL_IOAPIC_IOXAPIC;
        if ((apic_io_max == 1) || (apic_nvidia_io_max == apic_io_max))
                apix_mul_ioapic_method = APIC_MUL_IOAPIC_MASK;
        if (apic_directed_EOI_supported())
                apix_mul_ioapic_method = APIC_MUL_IOAPIC_DEOI;

        /* fall back to pcplusmp */
        if (apix_mul_ioapic_method == APIC_MUL_IOAPIC_PCPLUSMP) {
                /* make sure apix is after pcplusmp in /etc/mach */
                apix_enable = 0; /* go ahead with pcplusmp install next */
                return (PSM_FAILURE);
        }

        return (PSM_SUCCESS);
}

/*
 * handler for APIC Error interrupt. Just print a warning and continue
 */
int
apic_error_intr()
{
        uint_t  error0, error1, error;
        uint_t  i;

        /*
         * We need to write before read as per 7.4.17 of system prog manual.
         * We do both and or the results to be safe
         */
        error0 = apic_reg_ops->apic_read(APIC_ERROR_STATUS);
        apic_reg_ops->apic_write(APIC_ERROR_STATUS, 0);
        error1 = apic_reg_ops->apic_read(APIC_ERROR_STATUS);
        error = error0 | error1;

        /*
         * Clear the APIC error status (do this on all cpus that enter here)
         * (two writes are required due to the semantics of accessing the
         * error status register.)
         */
        apic_reg_ops->apic_write(APIC_ERROR_STATUS, 0);
        apic_reg_ops->apic_write(APIC_ERROR_STATUS, 0);

        /*
         * Prevent more than 1 CPU from handling error interrupt causing
         * double printing (interleave of characters from multiple
         * CPU's when using prom_printf)
         */
        if (lock_try(&apic_error_lock) == 0)
                return (error ? DDI_INTR_CLAIMED : DDI_INTR_UNCLAIMED);
        if (error) {
#if     DEBUG
                if (apic_debug)
                        debug_enter("pcplusmp: APIC Error interrupt received");
#endif /* DEBUG */
                if (apic_panic_on_apic_error)
                        cmn_err(CE_PANIC,
                            "APIC Error interrupt on CPU %d. Status = %x",
                            psm_get_cpu_id(), error);
                else {
                        if ((error & ~APIC_CS_ERRORS) == 0) {
                                /* cksum error only */
                                apic_error |= APIC_ERR_APIC_ERROR;
                                apic_apic_error |= error;
                                apic_num_apic_errors++;
                                apic_num_cksum_errors++;
                        } else {
                                /*
                                 * prom_printf is the best shot we have of
                                 * something which is problem free from
                                 * high level/NMI type of interrupts
                                 */
                                prom_printf("APIC Error interrupt on CPU %d. "
                                    "Status 0 = %x, Status 1 = %x\n",
                                    psm_get_cpu_id(), error0, error1);
                                apic_error |= APIC_ERR_APIC_ERROR;
                                apic_apic_error |= error;
                                apic_num_apic_errors++;
                                for (i = 0; i < apic_error_display_delay; i++) {
                                        tenmicrosec();
                                }
                                /*
                                 * provide more delay next time limited to
                                 * roughly 1 clock tick time
                                 */
                                if (apic_error_display_delay < 500)
                                        apic_error_display_delay *= 2;
                        }
                }
                lock_clear(&apic_error_lock);
                return (DDI_INTR_CLAIMED);
        } else {
                lock_clear(&apic_error_lock);
                return (DDI_INTR_UNCLAIMED);
        }
}

/*
 * Turn off the mask bit in the performance counter Local Vector Table entry.
 */
void
apic_cpcovf_mask_clear(void)
{
        apic_reg_ops->apic_write(APIC_PCINT_VECT,
            (apic_reg_ops->apic_read(APIC_PCINT_VECT) & ~APIC_LVT_MASK));
}

/*ARGSUSED*/
static int
apic_cmci_enable(xc_arg_t arg1, xc_arg_t arg2, xc_arg_t arg3)
{
        apic_reg_ops->apic_write(APIC_CMCI_VECT, apic_cmci_vect);
        return (0);
}

/*ARGSUSED*/
static int
apic_cmci_disable(xc_arg_t arg1, xc_arg_t arg2, xc_arg_t arg3)
{
        apic_reg_ops->apic_write(APIC_CMCI_VECT, apic_cmci_vect | AV_MASK);
        return (0);
}

/*ARGSUSED*/
int
cmci_cpu_setup(cpu_setup_t what, int cpuid, void *arg)
{
        cpuset_t        cpu_set;

        CPUSET_ONLY(cpu_set, cpuid);

        switch (what) {
                case CPU_ON:
                        xc_call(NULL, NULL, NULL, CPUSET2BV(cpu_set),
                            (xc_func_t)apic_cmci_enable);
                        break;

                case CPU_OFF:
                        xc_call(NULL, NULL, NULL, CPUSET2BV(cpu_set),
                            (xc_func_t)apic_cmci_disable);
                        break;

                default:
                        break;
        }

        return (0);
}

static void
apic_disable_local_apic(void)
{
        apic_reg_ops->apic_write_task_reg(APIC_MASK_ALL);
        apic_reg_ops->apic_write(APIC_LOCAL_TIMER, AV_MASK);

        /* local intr reg 0 */
        apic_reg_ops->apic_write(APIC_INT_VECT0, AV_MASK);

        /* disable NMI */
        apic_reg_ops->apic_write(APIC_INT_VECT1, AV_MASK);

        /* and error interrupt */
        apic_reg_ops->apic_write(APIC_ERR_VECT, AV_MASK);

        /* and perf counter intr */
        apic_reg_ops->apic_write(APIC_PCINT_VECT, AV_MASK);

        apic_reg_ops->apic_write(APIC_SPUR_INT_REG, APIC_SPUR_INTR);
}

static void
apic_cpu_send_SIPI(processorid_t cpun, boolean_t start)
{
        int             loop_count;
        uint32_t        vector;
        uint_t          apicid;
        ulong_t         iflag;

        apicid =  apic_cpus[cpun].aci_local_id;

        /*
         * Interrupts on current CPU will be disabled during the
         * steps in order to avoid unwanted side effects from
         * executing interrupt handlers on a problematic BIOS.
         */
        iflag = intr_clear();

        if (start) {
                outb(CMOS_ADDR, SSB);
                outb(CMOS_DATA, BIOS_SHUTDOWN);
        }

        /*
         * According to X2APIC specification in section '2.3.5.1' of
         * Interrupt Command Register Semantics, the semantics of
         * programming the Interrupt Command Register to dispatch an interrupt
         * is simplified. A single MSR write to the 64-bit ICR is required
         * for dispatching an interrupt. Specifically, with the 64-bit MSR
         * interface to ICR, system software is not required to check the
         * status of the delivery status bit prior to writing to the ICR
         * to send an IPI. With the removal of the Delivery Status bit,
         * system software no longer has a reason to read the ICR. It remains
         * readable only to aid in debugging.
         */
#ifdef  DEBUG
        APIC_AV_PENDING_SET();
#else
        if (apic_mode == LOCAL_APIC) {
                APIC_AV_PENDING_SET();
        }
#endif /* DEBUG */

        /* for integrated - make sure there is one INIT IPI in buffer */
        /* for external - it will wake up the cpu */
        apic_reg_ops->apic_write_int_cmd(apicid, AV_ASSERT | AV_RESET);

        /* If only 1 CPU is installed, PENDING bit will not go low */
        for (loop_count = apic_sipi_max_loop_count; loop_count; loop_count--) {
                if (apic_mode == LOCAL_APIC &&
                    apic_reg_ops->apic_read(APIC_INT_CMD1) & AV_PENDING)
                        apic_ret();
                else
                        break;
        }

        apic_reg_ops->apic_write_int_cmd(apicid, AV_DEASSERT | AV_RESET);
        drv_usecwait(20000);            /* 20 milli sec */

        if (apic_cpus[cpun].aci_local_ver >= APIC_INTEGRATED_VERS) {
                /* integrated apic */

                vector = (rm_platter_pa >> MMU_PAGESHIFT) &
                    (APIC_VECTOR_MASK | APIC_IPL_MASK);

                /* to offset the INIT IPI queue up in the buffer */
                apic_reg_ops->apic_write_int_cmd(apicid, vector | AV_STARTUP);
                drv_usecwait(200);              /* 20 micro sec */

                /*
                 * send the second SIPI (Startup IPI) as recommended by Intel
                 * software development manual.
                 */
                apic_reg_ops->apic_write_int_cmd(apicid, vector | AV_STARTUP);
                drv_usecwait(200);      /* 20 micro sec */
        }

        intr_restore(iflag);
}

/*ARGSUSED1*/
int
apic_cpu_start(processorid_t cpun, caddr_t arg)
{
        ASSERT(MUTEX_HELD(&cpu_lock));

        if (!apic_cpu_in_range(cpun)) {
                return (EINVAL);
        }

        /*
         * Switch to apic_common_send_ipi for safety during starting other CPUs.
         */
        if (apic_mode == LOCAL_X2APIC) {
                apic_switch_ipi_callback(B_TRUE);
        }

        apic_cmos_ssb_set = 1;
        apic_cpu_send_SIPI(cpun, B_TRUE);

        return (0);
}

/*
 * Put CPU into halted state with interrupts disabled.
 */
/*ARGSUSED1*/
int
apic_cpu_stop(processorid_t cpun, caddr_t arg)
{
        int             rc;
        cpu_t           *cp;
        extern cpuset_t cpu_ready_set;
        extern void cpu_idle_intercept_cpu(cpu_t *cp);

        ASSERT(MUTEX_HELD(&cpu_lock));

        if (!apic_cpu_in_range(cpun)) {
                return (EINVAL);
        }
        if (apic_cpus[cpun].aci_local_ver < APIC_INTEGRATED_VERS) {
                return (ENOTSUP);
        }

        cp = cpu_get(cpun);
        ASSERT(cp != NULL);
        ASSERT((cp->cpu_flags & CPU_OFFLINE) != 0);
        ASSERT((cp->cpu_flags & CPU_QUIESCED) != 0);
        ASSERT((cp->cpu_flags & CPU_ENABLE) == 0);

        /* Clear CPU_READY flag to disable cross calls. */
        cp->cpu_flags &= ~CPU_READY;
        CPUSET_ATOMIC_DEL(cpu_ready_set, cpun);
        rc = xc_flush_cpu(cp);
        if (rc != 0) {
                CPUSET_ATOMIC_ADD(cpu_ready_set, cpun);
                cp->cpu_flags |= CPU_READY;
                return (rc);
        }

        /* Intercept target CPU at a safe point before powering it off. */
        cpu_idle_intercept_cpu(cp);

        apic_cpu_send_SIPI(cpun, B_FALSE);
        cp->cpu_flags &= ~CPU_RUNNING;

        return (0);
}

int
apic_cpu_ops(psm_cpu_request_t *reqp)
{
        if (reqp == NULL) {
                return (EINVAL);
        }

        switch (reqp->pcr_cmd) {
        case PSM_CPU_ADD:
                return (apic_cpu_add(reqp));

        case PSM_CPU_REMOVE:
                return (apic_cpu_remove(reqp));

        case PSM_CPU_STOP:
                return (apic_cpu_stop(reqp->req.cpu_stop.cpuid,
                    reqp->req.cpu_stop.ctx));

        default:
                return (ENOTSUP);
        }
}

#ifdef  DEBUG
int     apic_break_on_cpu = 9;
int     apic_stretch_interrupts = 0;
int     apic_stretch_ISR = 1 << 3;      /* IPL of 3 matches nothing now */
#endif /* DEBUG */

/*
 * generates an interprocessor interrupt to another CPU. Any changes made to
 * this routine must be accompanied by similar changes to
 * apic_common_send_ipi().
 */
void
apic_send_ipi(int cpun, int ipl)
{
        int vector;
        ulong_t flag;

        vector = apic_resv_vector[ipl];

        ASSERT((vector >= APIC_BASE_VECT) && (vector <= APIC_SPUR_INTR));

        flag = intr_clear();

        APIC_AV_PENDING_SET();

        apic_reg_ops->apic_write_int_cmd(apic_cpus[cpun].aci_local_id,
            vector);

        intr_restore(flag);
}


/*ARGSUSED*/
void
apic_set_idlecpu(processorid_t cpun)
{
}

/*ARGSUSED*/
void
apic_unset_idlecpu(processorid_t cpun)
{
}


void
apic_ret()
{
}

/*
 * If apic_coarse_time == 1, then apic_gettime() is used instead of
 * apic_gethrtime().  This is used for performance instead of accuracy.
 */

hrtime_t
apic_gettime()
{
        int old_hrtime_stamp;
        hrtime_t temp;

        /*
         * In one-shot mode, we do not keep time, so if anyone
         * calls psm_gettime() directly, we vector over to
         * gethrtime().
         * one-shot mode MUST NOT be enabled if this psm is the source of
         * hrtime.
         */

        if (apic_oneshot)
                return (gethrtime());


gettime_again:
        while ((old_hrtime_stamp = apic_hrtime_stamp) & 1)
                apic_ret();

        temp = apic_nsec_since_boot;

        if (apic_hrtime_stamp != old_hrtime_stamp) {    /* got an interrupt */
                goto gettime_again;
        }
        return (temp);
}

/*
 * Here we return the number of nanoseconds since booting.  Note every
 * clock interrupt increments apic_nsec_since_boot by the appropriate
 * amount.
 */
hrtime_t
apic_gethrtime(void)
{
        int curr_timeval, countval, elapsed_ticks;
        int old_hrtime_stamp, status;
        hrtime_t temp;
        uint32_t cpun;
        ulong_t oflags;

        /*
         * In one-shot mode, we do not keep time, so if anyone
         * calls psm_gethrtime() directly, we vector over to
         * gethrtime().
         * one-shot mode MUST NOT be enabled if this psm is the source of
         * hrtime.
         */

        if (apic_oneshot)
                return (gethrtime());

        oflags = intr_clear();  /* prevent migration */

        cpun = apic_reg_ops->apic_read(APIC_LID_REG);
        if (apic_mode == LOCAL_APIC)
                cpun >>= APIC_ID_BIT_OFFSET;

        lock_set(&apic_gethrtime_lock);

gethrtime_again:
        while ((old_hrtime_stamp = apic_hrtime_stamp) & 1)
                apic_ret();

        /*
         * Check to see which CPU we are on.  Note the time is kept on
         * the local APIC of CPU 0.  If on CPU 0, simply read the current
         * counter.  If on another CPU, issue a remote read command to CPU 0.
         */
        if (cpun == apic_cpus[0].aci_local_id) {
                countval = apic_reg_ops->apic_read(APIC_CURR_COUNT);
        } else {
#ifdef  DEBUG
                APIC_AV_PENDING_SET();
#else
                if (apic_mode == LOCAL_APIC)
                        APIC_AV_PENDING_SET();
#endif /* DEBUG */

                apic_reg_ops->apic_write_int_cmd(
                    apic_cpus[0].aci_local_id, APIC_CURR_ADD | AV_REMOTE);

                while ((status = apic_reg_ops->apic_read(APIC_INT_CMD1))
                    & AV_READ_PENDING) {
                        apic_ret();
                }

                if (status & AV_REMOTE_STATUS)  /* 1 = valid */
                        countval = apic_reg_ops->apic_read(APIC_REMOTE_READ);
                else {  /* 0 = invalid */
                        apic_remote_hrterr++;
                        /*
                         * return last hrtime right now, will need more
                         * testing if change to retry
                         */
                        temp = apic_last_hrtime;

                        lock_clear(&apic_gethrtime_lock);

                        intr_restore(oflags);

                        return (temp);
                }
        }
        if (countval > last_count_read)
                countval = 0;
        else
                last_count_read = countval;

        elapsed_ticks = apic_hertz_count - countval;

        curr_timeval = APIC_TICKS_TO_NSECS(elapsed_ticks);
        temp = apic_nsec_since_boot + curr_timeval;

        if (apic_hrtime_stamp != old_hrtime_stamp) {    /* got an interrupt */
                /* we might have clobbered last_count_read. Restore it */
                last_count_read = apic_hertz_count;
                goto gethrtime_again;
        }

        if (temp < apic_last_hrtime) {
                /* return last hrtime if error occurs */
                apic_hrtime_error++;
                temp = apic_last_hrtime;
        }
        else
                apic_last_hrtime = temp;

        lock_clear(&apic_gethrtime_lock);
        intr_restore(oflags);

        return (temp);
}

/* apic NMI handler */
/*ARGSUSED*/
void
apic_nmi_intr(caddr_t arg, struct regs *rp)
{
        if (apic_shutdown_processors) {
                apic_disable_local_apic();
                return;
        }

        apic_error |= APIC_ERR_NMI;

        if (!lock_try(&apic_nmi_lock))
                return;
        apic_num_nmis++;

        if (apic_kmdb_on_nmi && psm_debugger()) {
                debug_enter("NMI received: entering kmdb\n");
        } else if (apic_panic_on_nmi) {
                /* Keep panic from entering kmdb. */
                nopanicdebug = 1;
                panic("NMI received\n");
        } else {
                /*
                 * prom_printf is the best shot we have of something which is
                 * problem free from high level/NMI type of interrupts
                 */
                prom_printf("NMI received\n");
        }

        lock_clear(&apic_nmi_lock);
}

processorid_t
apic_get_next_processorid(processorid_t cpu_id)
{

        int i;

        if (cpu_id == -1)
                return ((processorid_t)0);

        for (i = cpu_id + 1; i < NCPU; i++) {
                if (apic_cpu_in_range(i))
                        return (i);
        }

        return ((processorid_t)-1);
}

int
apic_cpu_add(psm_cpu_request_t *reqp)
{
        int i, rv = 0;
        ulong_t iflag;
        boolean_t first = B_TRUE;
        uchar_t localver;
        uint32_t localid, procid;
        processorid_t cpuid = (processorid_t)-1;
        mach_cpu_add_arg_t *ap;

        ASSERT(reqp != NULL);
        reqp->req.cpu_add.cpuid = (processorid_t)-1;

        /* Check whether CPU hotplug is supported. */
        if (!plat_dr_support_cpu() || apic_max_nproc == -1) {
                return (ENOTSUP);
        }

        ap = (mach_cpu_add_arg_t *)reqp->req.cpu_add.argp;
        switch (ap->type) {
        case MACH_CPU_ARG_LOCAL_APIC:
                localid = ap->arg.apic.apic_id;
                procid = ap->arg.apic.proc_id;
                if (localid >= 255 || procid > 255) {
                        cmn_err(CE_WARN,
                            "!apic: apicid(%u) or procid(%u) is invalid.",
                            localid, procid);
                        return (EINVAL);
                }
                break;

        case MACH_CPU_ARG_LOCAL_X2APIC:
                localid = ap->arg.apic.apic_id;
                procid = ap->arg.apic.proc_id;
                if (localid >= UINT32_MAX) {
                        cmn_err(CE_WARN,
                            "!apic: x2apicid(%u) is invalid.", localid);
                        return (EINVAL);
                } else if (localid >= 255 && apic_mode == LOCAL_APIC) {
                        cmn_err(CE_WARN, "!apic: system is in APIC mode, "
                            "can't support x2APIC processor.");
                        return (ENOTSUP);
                }
                break;

        default:
                cmn_err(CE_WARN,
                    "!apic: unknown argument type %d to apic_cpu_add().",
                    ap->type);
                return (EINVAL);
        }

        /* Use apic_ioapic_lock to sync with apic_get_next_bind_cpu. */
        iflag = intr_clear();
        lock_set(&apic_ioapic_lock);

        /* Check whether local APIC id already exists. */
        for (i = 0; i < apic_nproc; i++) {
                if (!CPU_IN_SET(apic_cpumask, i))
                        continue;
                if (apic_cpus[i].aci_local_id == localid) {
                        lock_clear(&apic_ioapic_lock);
                        intr_restore(iflag);
                        cmn_err(CE_WARN,
                            "!apic: local apic id %u already exists.",
                            localid);
                        return (EEXIST);
                } else if (apic_cpus[i].aci_processor_id == procid) {
                        lock_clear(&apic_ioapic_lock);
                        intr_restore(iflag);
                        cmn_err(CE_WARN,
                            "!apic: processor id %u already exists.",
                            (int)procid);
                        return (EEXIST);
                }

                /*
                 * There's no local APIC version number available in MADT table,
                 * so assume that all CPUs are homogeneous and use local APIC
                 * version number of the first existing CPU.
                 */
                if (first) {
                        first = B_FALSE;
                        localver = apic_cpus[i].aci_local_ver;
                }
        }
        ASSERT(first == B_FALSE);

        /*
         * Try to assign the same cpuid if APIC id exists in the dirty cache.
         */
        for (i = 0; i < apic_max_nproc; i++) {
                if (CPU_IN_SET(apic_cpumask, i)) {
                        ASSERT((apic_cpus[i].aci_status & APIC_CPU_FREE) == 0);
                        continue;
                }
                ASSERT(apic_cpus[i].aci_status & APIC_CPU_FREE);
                if ((apic_cpus[i].aci_status & APIC_CPU_DIRTY) &&
                    apic_cpus[i].aci_local_id == localid &&
                    apic_cpus[i].aci_processor_id == procid) {
                        cpuid = i;
                        break;
                }
        }

        /* Avoid the dirty cache and allocate fresh slot if possible. */
        if (cpuid == (processorid_t)-1) {
                for (i = 0; i < apic_max_nproc; i++) {
                        if ((apic_cpus[i].aci_status & APIC_CPU_FREE) &&
                            (apic_cpus[i].aci_status & APIC_CPU_DIRTY) == 0) {
                                cpuid = i;
                                break;
                        }
                }
        }

        /* Try to find any free slot as last resort. */
        if (cpuid == (processorid_t)-1) {
                for (i = 0; i < apic_max_nproc; i++) {
                        if (apic_cpus[i].aci_status & APIC_CPU_FREE) {
                                cpuid = i;
                                break;
                        }
                }
        }

        if (cpuid == (processorid_t)-1) {
                lock_clear(&apic_ioapic_lock);
                intr_restore(iflag);
                cmn_err(CE_NOTE,
                    "!apic: failed to allocate cpu id for processor %u.",
                    procid);
                rv = EAGAIN;
        } else if (ACPI_FAILURE(acpica_map_cpu(cpuid, procid))) {
                lock_clear(&apic_ioapic_lock);
                intr_restore(iflag);
                cmn_err(CE_NOTE,
                    "!apic: failed to build mapping for processor %u.",
                    procid);
                rv = EBUSY;
        } else {
                ASSERT(cpuid >= 0 && cpuid < NCPU);
                ASSERT(cpuid < apic_max_nproc && cpuid < max_ncpus);
                bzero(&apic_cpus[cpuid], sizeof (apic_cpus[0]));
                apic_cpus[cpuid].aci_processor_id = procid;
                apic_cpus[cpuid].aci_local_id = localid;
                apic_cpus[cpuid].aci_local_ver = localver;
                CPUSET_ATOMIC_ADD(apic_cpumask, cpuid);
                if (cpuid >= apic_nproc) {
                        apic_nproc = cpuid + 1;
                }
                lock_clear(&apic_ioapic_lock);
                intr_restore(iflag);
                reqp->req.cpu_add.cpuid = cpuid;
        }

        return (rv);
}

int
apic_cpu_remove(psm_cpu_request_t *reqp)
{
        int i;
        ulong_t iflag;
        processorid_t cpuid;

        /* Check whether CPU hotplug is supported. */
        if (!plat_dr_support_cpu() || apic_max_nproc == -1) {
                return (ENOTSUP);
        }

        cpuid = reqp->req.cpu_remove.cpuid;

        /* Use apic_ioapic_lock to sync with apic_get_next_bind_cpu. */
        iflag = intr_clear();
        lock_set(&apic_ioapic_lock);

        if (!apic_cpu_in_range(cpuid)) {
                lock_clear(&apic_ioapic_lock);
                intr_restore(iflag);
                cmn_err(CE_WARN,
                    "!apic: cpuid %d doesn't exist in apic_cpus array.",
                    cpuid);
                return (ENODEV);
        }
        ASSERT((apic_cpus[cpuid].aci_status & APIC_CPU_FREE) == 0);

        if (ACPI_FAILURE(acpica_unmap_cpu(cpuid))) {
                lock_clear(&apic_ioapic_lock);
                intr_restore(iflag);
                return (ENOENT);
        }

        if (cpuid == apic_nproc - 1) {
                /*
                 * We are removing the highest numbered cpuid so we need to
                 * find the next highest cpuid as the new value for apic_nproc.
                 */
                for (i = apic_nproc; i > 0; i--) {
                        if (CPU_IN_SET(apic_cpumask, i - 1)) {
                                apic_nproc = i;
                                break;
                        }
                }
                /* at least one CPU left */
                ASSERT(i > 0);
        }
        CPUSET_ATOMIC_DEL(apic_cpumask, cpuid);
        /* mark slot as free and keep it in the dirty cache */
        apic_cpus[cpuid].aci_status = APIC_CPU_FREE | APIC_CPU_DIRTY;

        lock_clear(&apic_ioapic_lock);
        intr_restore(iflag);

        return (0);
}

/*
 * Return the number of APIC clock ticks elapsed for 8245 to decrement
 * (APIC_TIME_COUNT + pit_ticks_adj) ticks.
 */
uint_t
apic_calibrate(volatile uint32_t *addr, uint16_t *pit_ticks_adj)
{
        uint8_t         pit_tick_lo;
        uint16_t        pit_tick, target_pit_tick;
        uint32_t        start_apic_tick, end_apic_tick;
        ulong_t         iflag;
        uint32_t        reg;

        reg = addr + APIC_CURR_COUNT - apicadr;

        iflag = intr_clear();

        do {
                pit_tick_lo = inb(PITCTR0_PORT);
                pit_tick = (inb(PITCTR0_PORT) << 8) | pit_tick_lo;
        } while (pit_tick < APIC_TIME_MIN ||
            pit_tick_lo <= APIC_LB_MIN || pit_tick_lo >= APIC_LB_MAX);

        /*
         * Wait for the 8254 to decrement by 5 ticks to ensure
         * we didn't start in the middle of a tick.
         * Compare with 0x10 for the wrap around case.
         */
        target_pit_tick = pit_tick - 5;
        do {
                pit_tick_lo = inb(PITCTR0_PORT);
                pit_tick = (inb(PITCTR0_PORT) << 8) | pit_tick_lo;
        } while (pit_tick > target_pit_tick || pit_tick_lo < 0x10);

        start_apic_tick = apic_reg_ops->apic_read(reg);

        /*
         * Wait for the 8254 to decrement by
         * (APIC_TIME_COUNT + pit_ticks_adj) ticks
         */
        target_pit_tick = pit_tick - APIC_TIME_COUNT;
        do {
                pit_tick_lo = inb(PITCTR0_PORT);
                pit_tick = (inb(PITCTR0_PORT) << 8) | pit_tick_lo;
        } while (pit_tick > target_pit_tick || pit_tick_lo < 0x10);

        end_apic_tick = apic_reg_ops->apic_read(reg);

        *pit_ticks_adj = target_pit_tick - pit_tick;

        intr_restore(iflag);

        return (start_apic_tick - end_apic_tick);
}

/*
 * Initialise the APIC timer on the local APIC of CPU 0 to the desired
 * frequency.  Note at this stage in the boot sequence, the boot processor
 * is the only active processor.
 * hertz value of 0 indicates a one-shot mode request.  In this case
 * the function returns the resolution (in nanoseconds) for the hardware
 * timer interrupt.  If one-shot mode capability is not available,
 * the return value will be 0. apic_enable_oneshot is a global switch
 * for disabling the functionality.
 * A non-zero positive value for hertz indicates a periodic mode request.
 * In this case the hardware will be programmed to generate clock interrupts
 * at hertz frequency and returns the resolution of interrupts in
 * nanosecond.
 */

int
apic_clkinit(int hertz)
{
        int             ret;

        apic_int_busy_mark = (apic_int_busy_mark *
            apic_sample_factor_redistribution) / 100;
        apic_int_free_mark = (apic_int_free_mark *
            apic_sample_factor_redistribution) / 100;
        apic_diff_for_redistribution = (apic_diff_for_redistribution *
            apic_sample_factor_redistribution) / 100;

        ret = apic_timer_init(hertz);
        return (ret);

}

/*
 * apic_preshutdown:
 * Called early in shutdown whilst we can still access filesystems to do
 * things like loading modules which will be required to complete shutdown
 * after filesystems are all unmounted.
 */
void
apic_preshutdown(int cmd, int fcn)
{
        APIC_VERBOSE_POWEROFF(("apic_preshutdown(%d,%d); m=%d a=%d\n",
            cmd, fcn, apic_poweroff_method, apic_enable_acpi));
}

void
apic_shutdown(int cmd, int fcn)
{
        int restarts, attempts;
        int i;
        uchar_t byte;
        ulong_t iflag;

        hpet_acpi_fini();

        /* Send NMI to all CPUs except self to do per processor shutdown */
        iflag = intr_clear();
#ifdef  DEBUG
        APIC_AV_PENDING_SET();
#else
        if (apic_mode == LOCAL_APIC)
                APIC_AV_PENDING_SET();
#endif /* DEBUG */
        apic_shutdown_processors = 1;
        apic_reg_ops->apic_write(APIC_INT_CMD1,
            AV_NMI | AV_LEVEL | AV_SH_ALL_EXCSELF);

        /* restore cmos shutdown byte before reboot */
        if (apic_cmos_ssb_set) {
                outb(CMOS_ADDR, SSB);
                outb(CMOS_DATA, 0);
        }

        ioapic_disable_redirection();

        /*      disable apic mode if imcr present       */
        if (apic_imcrp) {
                outb(APIC_IMCR_P1, (uchar_t)APIC_IMCR_SELECT);
                outb(APIC_IMCR_P2, (uchar_t)APIC_IMCR_PIC);
        }

        apic_disable_local_apic();

        intr_restore(iflag);

        /* remainder of function is for shutdown cases only */
        if (cmd != A_SHUTDOWN)
                return;

        /*
         * Switch system back into Legacy-Mode if using ACPI and
         * not powering-off.  Some BIOSes need to remain in ACPI-mode
         * for power-off to succeed (Dell Dimension 4600)
         * Do not disable ACPI while doing fastreboot
         */
        if (apic_enable_acpi && fcn != AD_POWEROFF && fcn != AD_FASTREBOOT)
                (void) AcpiDisable();

        if (fcn == AD_FASTREBOOT) {
                apic_reg_ops->apic_write(APIC_INT_CMD1,
                    AV_ASSERT | AV_RESET | AV_SH_ALL_EXCSELF);
        }

        /* remainder of function is for shutdown+poweroff case only */
        if (fcn != AD_POWEROFF)
                return;

        switch (apic_poweroff_method) {
                case APIC_POWEROFF_VIA_RTC:

                        /* select the extended NVRAM bank in the RTC */
                        outb(CMOS_ADDR, RTC_REGA);
                        byte = inb(CMOS_DATA);
                        outb(CMOS_DATA, (byte | EXT_BANK));

                        outb(CMOS_ADDR, PFR_REG);

                        /* for Predator must toggle the PAB bit */
                        byte = inb(CMOS_DATA);

                        /*
                         * clear power active bar, wakeup alarm and
                         * kickstart
                         */
                        byte &= ~(PAB_CBIT | WF_FLAG | KS_FLAG);
                        outb(CMOS_DATA, byte);

                        /* delay before next write */
                        drv_usecwait(1000);

                        /* for S40 the following would suffice */
                        byte = inb(CMOS_DATA);

                        /* power active bar control bit */
                        byte |= PAB_CBIT;
                        outb(CMOS_DATA, byte);

                        break;

                case APIC_POWEROFF_VIA_ASPEN_BMC:
                        restarts = 0;
restart_aspen_bmc:
                        if (++restarts == 3)
                                break;
                        attempts = 0;
                        do {
                                byte = inb(MISMIC_FLAG_REGISTER);
                                byte &= MISMIC_BUSY_MASK;
                                if (byte != 0) {
                                        drv_usecwait(1000);
                                        if (attempts >= 3)
                                                goto restart_aspen_bmc;
                                        ++attempts;
                                }
                        } while (byte != 0);
                        outb(MISMIC_CNTL_REGISTER, CC_SMS_GET_STATUS);
                        byte = inb(MISMIC_FLAG_REGISTER);
                        byte |= 0x1;
                        outb(MISMIC_FLAG_REGISTER, byte);
                        i = 0;
                        for (; i < (sizeof (aspen_bmc)/sizeof (aspen_bmc[0]));
                            i++) {
                                attempts = 0;
                                do {
                                        byte = inb(MISMIC_FLAG_REGISTER);
                                        byte &= MISMIC_BUSY_MASK;
                                        if (byte != 0) {
                                                drv_usecwait(1000);
                                                if (attempts >= 3)
                                                        goto restart_aspen_bmc;
                                                ++attempts;
                                        }
                                } while (byte != 0);
                                outb(MISMIC_CNTL_REGISTER, aspen_bmc[i].cntl);
                                outb(MISMIC_DATA_REGISTER, aspen_bmc[i].data);
                                byte = inb(MISMIC_FLAG_REGISTER);
                                byte |= 0x1;
                                outb(MISMIC_FLAG_REGISTER, byte);
                        }
                        break;

                case APIC_POWEROFF_VIA_SITKA_BMC:
                        restarts = 0;
restart_sitka_bmc:
                        if (++restarts == 3)
                                break;
                        attempts = 0;
                        do {
                                byte = inb(SMS_STATUS_REGISTER);
                                byte &= SMS_STATE_MASK;
                                if ((byte == SMS_READ_STATE) ||
                                    (byte == SMS_WRITE_STATE)) {
                                        drv_usecwait(1000);
                                        if (attempts >= 3)
                                                goto restart_sitka_bmc;
                                        ++attempts;
                                }
                        } while ((byte == SMS_READ_STATE) ||
                            (byte == SMS_WRITE_STATE));
                        outb(SMS_COMMAND_REGISTER, SMS_GET_STATUS);
                        i = 0;
                        for (; i < (sizeof (sitka_bmc)/sizeof (sitka_bmc[0]));
                            i++) {
                                attempts = 0;
                                do {
                                        byte = inb(SMS_STATUS_REGISTER);
                                        byte &= SMS_IBF_MASK;
                                        if (byte != 0) {
                                                drv_usecwait(1000);
                                                if (attempts >= 3)
                                                        goto restart_sitka_bmc;
                                                ++attempts;
                                        }
                                } while (byte != 0);
                                outb(sitka_bmc[i].port, sitka_bmc[i].data);
                        }
                        break;

                case APIC_POWEROFF_NONE:

                        /* If no APIC direct method, we will try using ACPI */
                        if (apic_enable_acpi) {
                                if (acpi_poweroff() == 1)
                                        return;
                        } else
                                return;

                        break;
        }
        /*
         * Wait a limited time here for power to go off.
         * If the power does not go off, then there was a
         * problem and we should continue to the halt which
         * prints a message for the user to press a key to
         * reboot.
         */
        drv_usecwait(7000000); /* wait seven seconds */

}

cyclic_id_t apic_cyclic_id;

/*
 * The following functions are in the platform specific file so that they
 * can be different functions depending on whether we are running on
 * bare metal or a hypervisor.
 */

/*
 * map an apic for memory-mapped access
 */
uint32_t *
mapin_apic(uint32_t addr, size_t len, int flags)
{
        return ((void *)psm_map_phys(addr, len, flags));
}

uint32_t *
mapin_ioapic(uint32_t addr, size_t len, int flags)
{
        return (mapin_apic(addr, len, flags));
}

/*
 * unmap an apic
 */
void
mapout_apic(caddr_t addr, size_t len)
{
        psm_unmap_phys(addr, len);
}

void
mapout_ioapic(caddr_t addr, size_t len)
{
        mapout_apic(addr, len);
}

uint32_t
ioapic_read(int ioapic_ix, uint32_t reg)
{
        volatile uint32_t *ioapic;

        ioapic = apicioadr[ioapic_ix];
        ioapic[APIC_IO_REG] = reg;
        return (ioapic[APIC_IO_DATA]);
}

void
ioapic_write(int ioapic_ix, uint32_t reg, uint32_t value)
{
        volatile uint32_t *ioapic;

        ioapic = apicioadr[ioapic_ix];
        ioapic[APIC_IO_REG] = reg;
        ioapic[APIC_IO_DATA] = value;
}

void
ioapic_write_eoi(int ioapic_ix, uint32_t value)
{
        volatile uint32_t *ioapic;

        ioapic = apicioadr[ioapic_ix];
        ioapic[APIC_IO_EOI] = value;
}

/*
 * Round-robin algorithm to find the next CPU with interrupts enabled.
 * It can't share the same static variable apic_next_bind_cpu with
 * apic_get_next_bind_cpu(), since that will cause all interrupts to be
 * bound to CPU1 at boot time.  During boot, only CPU0 is online with
 * interrupts enabled when apic_get_next_bind_cpu() and apic_find_cpu()
 * are called.  However, the pcplusmp driver assumes that there will be
 * boot_ncpus CPUs configured eventually so it tries to distribute all
 * interrupts among CPU0 - CPU[boot_ncpus - 1].  Thus to prevent all
 * interrupts being targetted at CPU1, we need to use a dedicated static
 * variable for find_next_cpu() instead of sharing apic_next_bind_cpu.
 */

processorid_t
apic_find_cpu(int flag)
{
        int i;
        static processorid_t acid = 0;

        /* Find the first CPU with the passed-in flag set */
        for (i = 0; i < apic_nproc; i++) {
                if (++acid >= apic_nproc) {
                        acid = 0;
                }
                if (apic_cpu_in_range(acid) &&
                    (apic_cpus[acid].aci_status & flag)) {
                        break;
                }
        }

        ASSERT((apic_cpus[acid].aci_status & flag) != 0);
        return (acid);
}

/*
 * Switch between safe and x2APIC IPI sending method.
 * CPU may power on in xapic mode or x2apic mode. If CPU needs to send IPI to
 * other CPUs before entering x2APIC mode, it still needs to xAPIC method.
 * Before sending StartIPI to target CPU, psm_send_ipi will be changed to
 * apic_common_send_ipi, which detects current local APIC mode and use right
 * method to send IPI. If some CPUs fail to start up, apic_poweron_cnt
 * won't return to zero, so apic_common_send_ipi will always be used.
 * psm_send_ipi can't be simply changed back to x2apic_send_ipi if some CPUs
 * failed to start up because those failed CPUs may recover itself later at
 * unpredictable time.
 */
void
apic_switch_ipi_callback(boolean_t enter)
{
        ulong_t iflag;
        struct psm_ops *pops = psmops;

        iflag = intr_clear();
        lock_set(&apic_mode_switch_lock);
        if (enter) {
                ASSERT(apic_poweron_cnt >= 0);
                if (apic_poweron_cnt == 0) {
                        pops->psm_send_ipi = apic_common_send_ipi;
                        send_dirintf = pops->psm_send_ipi;
                }
                apic_poweron_cnt++;
        } else {
                ASSERT(apic_poweron_cnt > 0);
                apic_poweron_cnt--;
                if (apic_poweron_cnt == 0) {
                        pops->psm_send_ipi = x2apic_send_ipi;
                        send_dirintf = pops->psm_send_ipi;
                }
        }
        lock_clear(&apic_mode_switch_lock);
        intr_restore(iflag);
}

void
apic_intrmap_init(int apic_mode)
{
        int suppress_brdcst_eoi = 0;

        /*
         * Intel Software Developer's Manual 3A, 10.12.7:
         *
         * Routing of device interrupts to local APIC units operating in
         * x2APIC mode requires use of the interrupt-remapping architecture
         * specified in the Intel Virtualization Technology for Directed
         * I/O, Revision 1.3.  Because of this, BIOS must enumerate support
         * for and software must enable this interrupt remapping with
         * Extended Interrupt Mode Enabled before it enabling x2APIC mode in
         * the local APIC units.
         *
         *
         * In other words, to use the APIC in x2APIC mode, we need interrupt
         * remapping.  Since we don't start up the IOMMU by default, we
         * won't be able to do any interrupt remapping and therefore have to
         * use the APIC in traditional 'local APIC' mode with memory mapped
         * I/O.
         */

        if (psm_vt_ops != NULL) {
                if (((apic_intrmap_ops_t *)psm_vt_ops)->
                    apic_intrmap_init(apic_mode) == DDI_SUCCESS) {

                        apic_vt_ops = psm_vt_ops;

                        /*
                         * We leverage the interrupt remapping engine to
                         * suppress broadcast EOI; thus we must send the
                         * directed EOI with the directed-EOI handler.
                         */
                        if (apic_directed_EOI_supported() == 0) {
                                suppress_brdcst_eoi = 1;
                        }

                        apic_vt_ops->apic_intrmap_enable(suppress_brdcst_eoi);

                        if (apic_detect_x2apic()) {
                                apic_enable_x2apic();
                        }

                        if (apic_directed_EOI_supported() == 0) {
                                apic_set_directed_EOI_handler();
                        }
                }
        }
}

/*ARGSUSED*/
static void
apic_record_ioapic_rdt(void *intrmap_private, ioapic_rdt_t *irdt)
{
        irdt->ir_hi <<= APIC_ID_BIT_OFFSET;
}

/*ARGSUSED*/
static void
apic_record_msi(void *intrmap_private, msi_regs_t *mregs)
{
        mregs->mr_addr = MSI_ADDR_HDR |
            (MSI_ADDR_RH_FIXED << MSI_ADDR_RH_SHIFT) |
            (MSI_ADDR_DM_PHYSICAL << MSI_ADDR_DM_SHIFT) |
            (mregs->mr_addr << MSI_ADDR_DEST_SHIFT);
        mregs->mr_data = (MSI_DATA_TM_EDGE << MSI_DATA_TM_SHIFT) |
            mregs->mr_data;
}

/*
 * Functions from apic_introp.c
 *
 * Those functions are used by apic_intr_ops().
 */

/*
 * MSI support flag:
 * reflects whether MSI is supported at APIC level
 * it can also be patched through /etc/system
 *
 *  0 = default value - don't know and need to call apic_check_msi_support()
 *      to find out then set it accordingly
 *  1 = supported
 * -1 = not supported
 */
int     apic_support_msi = 0;

/* Multiple vector support for MSI-X */
int     apic_msix_enable = 1;

/* Multiple vector support for MSI */
int     apic_multi_msi_enable = 1;

/*
 * Check whether the system supports MSI.
 *
 * MSI is required for PCI-E and for PCI versions later than 2.2, so if we find
 * a PCI-E bus or we find a PCI bus whose version we know is >= 2.2, then we
 * return PSM_SUCCESS to indicate this system supports MSI.
 *
 * (Currently the only way we check whether a given PCI bus supports >= 2.2 is
 * by detecting if we are running inside the KVM hypervisor, which guarantees
 * this version number.)
 */
int
apic_check_msi_support()
{
        dev_info_t *cdip;
        char dev_type[16];
        int dev_len;

        DDI_INTR_IMPLDBG((CE_CONT, "apic_check_msi_support:\n"));

        /*
         * check whether the first level children of root_node have
         * PCI-E or PCI capability.
         */
        for (cdip = ddi_get_child(ddi_root_node()); cdip != NULL;
            cdip = ddi_get_next_sibling(cdip)) {

                DDI_INTR_IMPLDBG((CE_CONT, "apic_check_msi_support: cdip: 0x%p,"
                    " driver: %s, binding: %s, nodename: %s\n", (void *)cdip,
                    ddi_driver_name(cdip), ddi_binding_name(cdip),
                    ddi_node_name(cdip)));
                dev_len = sizeof (dev_type);
                if (ddi_getlongprop_buf(DDI_DEV_T_ANY, cdip, DDI_PROP_DONTPASS,
                    "device_type", (caddr_t)dev_type, &dev_len)
                    != DDI_PROP_SUCCESS)
                        continue;
                if (strcmp(dev_type, "pciex") == 0)
                        return (PSM_SUCCESS);
                if (strcmp(dev_type, "pci") == 0 && get_hwenv() == HW_KVM)
                        return (PSM_SUCCESS);
        }

        /* MSI is not supported on this system */
        DDI_INTR_IMPLDBG((CE_CONT, "apic_check_msi_support: no 'pciex' "
            "device_type found\n"));
        return (PSM_FAILURE);
}

/*
 * apic_pci_msi_unconfigure:
 *
 * This and next two interfaces are copied from pci_intr_lib.c
 * Do ensure that these two files stay in sync.
 * These needed to be copied over here to avoid a deadlock situation on
 * certain mp systems that use MSI interrupts.
 *
 * IMPORTANT regards next three interfaces:
 * i) are called only for MSI/X interrupts.
 * ii) called with interrupts disabled, and must not block
 */
void
apic_pci_msi_unconfigure(dev_info_t *rdip, int type, int inum)
{
        ushort_t                msi_ctrl;
        int                     cap_ptr = i_ddi_get_msi_msix_cap_ptr(rdip);
        ddi_acc_handle_t        handle = i_ddi_get_pci_config_handle(rdip);

        ASSERT((handle != NULL) && (cap_ptr != 0));

        if (type == DDI_INTR_TYPE_MSI) {
                msi_ctrl = pci_config_get16(handle, cap_ptr + PCI_MSI_CTRL);
                msi_ctrl &= (~PCI_MSI_MME_MASK);
                pci_config_put16(handle, cap_ptr + PCI_MSI_CTRL, msi_ctrl);
                pci_config_put32(handle, cap_ptr + PCI_MSI_ADDR_OFFSET, 0);

                if (msi_ctrl &  PCI_MSI_64BIT_MASK) {
                        pci_config_put16(handle,
                            cap_ptr + PCI_MSI_64BIT_DATA, 0);
                        pci_config_put32(handle,
                            cap_ptr + PCI_MSI_ADDR_OFFSET + 4, 0);
                } else {
                        pci_config_put16(handle,
                            cap_ptr + PCI_MSI_32BIT_DATA, 0);
                }

        } else if (type == DDI_INTR_TYPE_MSIX) {
                uintptr_t       off;
                uint32_t        mask;
                ddi_intr_msix_t *msix_p = i_ddi_get_msix(rdip);

                ASSERT(msix_p != NULL);

                /* Offset into "inum"th entry in the MSI-X table & mask it */
                off = (uintptr_t)msix_p->msix_tbl_addr + (inum *
                    PCI_MSIX_VECTOR_SIZE) + PCI_MSIX_VECTOR_CTRL_OFFSET;

                mask = ddi_get32(msix_p->msix_tbl_hdl, (uint32_t *)off);

                ddi_put32(msix_p->msix_tbl_hdl, (uint32_t *)off, (mask | 1));

                /* Offset into the "inum"th entry in the MSI-X table */
                off = (uintptr_t)msix_p->msix_tbl_addr +
                    (inum * PCI_MSIX_VECTOR_SIZE);

                /* Reset the "data" and "addr" bits */
                ddi_put32(msix_p->msix_tbl_hdl,
                    (uint32_t *)(off + PCI_MSIX_DATA_OFFSET), 0);
                ddi_put64(msix_p->msix_tbl_hdl, (uint64_t *)off, 0);
        }
}

/*
 * apic_pci_msi_disable_mode:
 */
void
apic_pci_msi_disable_mode(dev_info_t *rdip, int type)
{
        ushort_t                msi_ctrl;
        int                     cap_ptr = i_ddi_get_msi_msix_cap_ptr(rdip);
        ddi_acc_handle_t        handle = i_ddi_get_pci_config_handle(rdip);

        ASSERT((handle != NULL) && (cap_ptr != 0));

        if (type == DDI_INTR_TYPE_MSI) {
                msi_ctrl = pci_config_get16(handle, cap_ptr + PCI_MSI_CTRL);
                if (!(msi_ctrl & PCI_MSI_ENABLE_BIT))
                        return;

                msi_ctrl &= ~PCI_MSI_ENABLE_BIT;        /* MSI disable */
                pci_config_put16(handle, cap_ptr + PCI_MSI_CTRL, msi_ctrl);

        } else if (type == DDI_INTR_TYPE_MSIX) {
                msi_ctrl = pci_config_get16(handle, cap_ptr + PCI_MSIX_CTRL);
                if (msi_ctrl & PCI_MSIX_ENABLE_BIT) {
                        msi_ctrl &= ~PCI_MSIX_ENABLE_BIT;
                        pci_config_put16(handle, cap_ptr + PCI_MSIX_CTRL,
                            msi_ctrl);
                }
        }
}

uint32_t
apic_get_localapicid(uint32_t cpuid)
{
        ASSERT(cpuid < apic_nproc && apic_cpus != NULL);

        return (apic_cpus[cpuid].aci_local_id);
}

uchar_t
apic_get_ioapicid(uchar_t ioapicindex)
{
        ASSERT(ioapicindex < MAX_IO_APIC);

        return (apic_io_id[ioapicindex]);
}