usr/src/uts/sparc/ip/Makefile

   1 #
   2 # CDDL HEADER START
   3 #
   4 # The contents of this file are subject to the terms of the
   5 # Common Development and Distribution License (the "License").
   6 # You may not use this file except in compliance with the License.
   7 #
   8 # You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
   9 # or http://www.opensolaris.org/os/licensing.
  10 # See the License for the specific language governing permissions
  11 # and limitations under the License.
  12 #
  13 # When distributing Covered Code, include this CDDL HEADER in each
  14 # file and include the License file at usr/src/OPENSOLARIS.LICENSE.
  15 # If applicable, add the following below this CDDL HEADER, with the
  16 # fields enclosed by brackets "[]" replaced with your own identifying
  17 # information: Portions Copyright [yyyy] [name of copyright owner]
  18 #
  19 # CDDL HEADER END
  20 #
  21 #
  22 # Copyright 2009 Sun Microsystems, Inc.  All rights reserved.
  23 # Use is subject to license terms.
  24 #
  25 #
  26 #       This makefile drives the production of the ip driver
  27 #       kernel module.
  28 #
  29 #       sparc architecture dependent
  30 #
  31 #
  32 #       Path to the base of the uts directory tree (usually /usr/src/uts).
  33 #
  34 UTSBASE = ../..
  35
  36 #
  37 #       Define the module and object file sets.
  38 #
  39 MODULE          = ip
  40 OBJECTS         = $(IP_OBJS:%=$(OBJS_DIR)/%)
  41 LINTS           = $(IP_OBJS:%.o=$(LINTS_DIR)/%.ln)
  42 ROOTMODULE      = $(ROOT_DRV_DIR)/$(MODULE)
  43 ROOTLINK        = $(ROOT_STRMOD_DIR)/$(MODULE)
  44 CONF_SRCDIR     = $(UTSBASE)/common/inet/ip
  45
  46 #
  47 #       Include common rules.
  48 #
  49 include $(UTSBASE)/sparc/Makefile.sparc
  50
  51 #
  52 #       Define targets
  53 #
  54 ALL_TARGET      = $(BINARY) $(SRC_CONFFILE)
  55 LINT_TARGET     = $(MODULE).lint
  56 INSTALL_TARGET  = $(BINARY) $(ROOTMODULE) $(ROOTLINK) $(ROOT_CONFFILE)
  57
  58 #
  59 # lint pass one enforcement
  60 #
  61 CFLAGS          += $(CCVERBOSE)
  62 CFLAGS          += -xinline=tcp_set_ws_value
  63 #
  64 # To get the BPF header files included by ipnet.h
  65 #
  66 INC_PATH        += -I$(UTSBASE)/common/io/bpf
  67
  68 #
  69 # For now, disable these lint checks; maintainers should endeavor
  70 # to investigate and remove these for maximum lint coverage.
  71 # Please do not carry these forward to new Makefiles.
  72 #
  73 LINTTAGS        += -erroff=E_SUSPICIOUS_COMPARISON
  74 LINTTAGS        += -erroff=E_BAD_PTR_CAST_ALIGN
  75 LINTTAGS        += -erroff=E_SUPPRESSION_DIRECTIVE_UNUSED
  76 LINTTAGS        += -erroff=E_STATIC_UNUSED
  77 LINTTAGS        += -erroff=E_PTRDIFF_OVERFLOW
  78 LINTTAGS        += -erroff=E_ASSIGN_NARROW_CONV
  79
  80 CERRWARN        += -_gcc=-Wno-parentheses
  81 CERRWARN        += -_gcc=-Wno-unused-label
  82 CERRWARN        += -_gcc=-Wno-unused-function
  83 CERRWARN        += -_gcc=-Wno-unused-variable
  84 CERRWARN        += -_gcc=-Wno-switch
  85 CERRWARN        += -_gcc=-Wno-uninitialized
  86 CERRWARN        += -_gcc=-Wno-type-limits
  87
  88 #
  89 # Depends on md5 and swrand (for SCTP). SCTP needs to depend on
  90 # swrand as it needs random numbers early on during boot before
  91 # kCF subsystem can load swrand.
  92 #
  93 LDFLAGS         += -dy -Nmisc/md5 -Ncrypto/swrand -Nmisc/hook -Nmisc/neti
  94
  95 #
  96 #       Default build targets.
  97 #
  98 .KEEP_STATE:
  99
 100 def:            $(DEF_DEPS)
 101
 102 all:            $(ALL_DEPS) $(SISCHECK_DEPS)
 103
 104 clean:          $(CLEAN_DEPS) $(SISCLEAN_DEPS)
 105
 106 clobber:        $(CLOBBER_DEPS) $(SISCLEAN_DEPS)
 107
 108 lint:           $(LINT_DEPS)
 109
 110 modlintlib:     $(MODLINTLIB_DEPS)
 111
 112 clean.lint:     $(CLEAN_LINT_DEPS)
 113
 114 install:        $(INSTALL_DEPS) $(SISCHECK_DEPS)
 115
 116 $(ROOTLINK):    $(ROOT_STRMOD_DIR) $(ROOTMODULE)
 117         -$(RM) $@; ln $(ROOTMODULE) $@
 118
 119 #
 120 #       Include common targets.
 121 #
 122 include $(UTSBASE)/sparc/Makefile.targ
 123
 124 #
 125 # The ip CTF data is merged into the genunix module because these types are
 126 # complex and heavily shared.  The genunix build will execute one of the
 127 # rules below to create an archive, ipctf.a, containing the ip objects.  The
 128 # real ip will be uniquified against genunix later in the build, and will
 129 # emerge containing very few types.
 130 #
 131 $(OBJS_DIR)/ipctf.a: $(OBJECTS)
 132         -$(RM) $@
 133         $(AR) -r $@ $(OBJECTS)
 134
 135 $(OBJECTS): $(OBJS_DIR)
 136
 137 CLOBBERFILES += $(OBJS_DIR)/ipctf.a
 138
 139 ipctf.obj64: FRC
 140         @BUILD_TYPE=OBJ64 VERSION='$(VERSION)' $(MAKE) obj64/ipctf.a
 141
 142 ipctf.debug64: FRC
 143         @BUILD_TYPE=DBG64 VERSION='$(VERSION)' $(MAKE) debug64/ipctf.a