dmake: do not set MAKEFLAGS=k

[unleashed/tickless.git] / usr / src / cmd / syseventd / modules / zfs_mod / zfs_mod.c

/*
 * CDDL HEADER START
 *
 * The contents of this file are subject to the terms of the
 * Common Development and Distribution License (the "License").
 * You may not use this file except in compliance with the License.
 *
 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
 * or http://www.opensolaris.org/os/licensing.
 * See the License for the specific language governing permissions
 * and limitations under the License.
 *
 * When distributing Covered Code, include this CDDL HEADER in each
 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
 * If applicable, add the following below this CDDL HEADER, with the
 * fields enclosed by brackets "[]" replaced with your own identifying
 * information: Portions Copyright [yyyy] [name of copyright owner]
 *
 * CDDL HEADER END
 */
/*
 * Copyright (c) 2007, 2010, Oracle and/or its affiliates. All rights reserved.
 * Copyright (c) 2012 by Delphix. All rights reserved.
 * Copyright 2016 Nexenta Systems, Inc. All rights reserved.
 */

/*
 * ZFS syseventd module.
 *
 * The purpose of this module is to identify when devices are added to the
 * system, and appropriately online or replace the affected vdevs.
 *
 * When a device is added to the system:
 *
 *      1. Search for any vdevs whose devid matches that of the newly added
 *         device.
 *
 *      2. If no vdevs are found, then search for any vdevs whose devfs path
 *         matches that of the new device.
 *
 *      3. If no vdevs match by either method, then ignore the event.
 *
 *      4. Attempt to online the device with a flag to indicate that it should
 *         be unspared when resilvering completes.  If this succeeds, then the
 *         same device was inserted and we should continue normally.
 *
 *      5. If the pool does not have the 'autoreplace' property set, attempt to
 *         online the device again without the unspare flag, which will
 *         generate a FMA fault.
 *
 *      6. If the pool has the 'autoreplace' property set, and the matching vdev
 *         is a whole disk, then label the new disk and attempt a 'zpool
 *         replace'.
 *
 * The module responds to EC_DEV_ADD events for both disks and lofi devices,
 * with the latter used for testing.  The special ESC_ZFS_VDEV_CHECK event
 * indicates that a device failed to open during pool load, but the autoreplace
 * property was set.  In this case, we deferred the associated FMA fault until
 * our module had a chance to process the autoreplace logic.  If the device
 * could not be replaced, then the second online attempt will trigger the FMA
 * fault that we skipped earlier.
 */

#include <alloca.h>
#include <devid.h>
#include <fcntl.h>
#include <libnvpair.h>
#include <libsysevent.h>
#include <libzfs.h>
#include <limits.h>
#include <stdlib.h>
#include <string.h>
#include <syslog.h>
#include <sys/list.h>
#include <sys/sunddi.h>
#include <sys/sysevent/eventdefs.h>
#include <sys/sysevent/dev.h>
#include <thread_pool.h>
#include <unistd.h>
#include "syseventd.h"

#if defined(__i386) || defined(__amd64)
#define PHYS_PATH       ":q"
#define RAW_SLICE       "p0"
#elif defined(__sparc)
#define PHYS_PATH       ":c"
#define RAW_SLICE       "s2"
#else
#error Unknown architecture
#endif

typedef void (*zfs_process_func_t)(zpool_handle_t *, nvlist_t *, boolean_t);

libzfs_handle_t *g_zfshdl;
list_t g_pool_list;
tpool_t *g_tpool;
boolean_t g_enumeration_done;
thread_t g_zfs_tid;

typedef struct unavailpool {
        zpool_handle_t  *uap_zhp;
        list_node_t     uap_node;
} unavailpool_t;

int
zfs_toplevel_state(zpool_handle_t *zhp)
{
        nvlist_t *nvroot;
        vdev_stat_t *vs;
        unsigned int c;

        verify(nvlist_lookup_nvlist(zpool_get_config(zhp, NULL),
            ZPOOL_CONFIG_VDEV_TREE, &nvroot) == 0);
        verify(nvlist_lookup_uint64_array(nvroot, ZPOOL_CONFIG_VDEV_STATS,
            (uint64_t **)&vs, &c) == 0);
        return (vs->vs_state);
}

static int
zfs_unavail_pool(zpool_handle_t *zhp, void *data)
{
        if (zfs_toplevel_state(zhp) < VDEV_STATE_DEGRADED) {
                unavailpool_t *uap;
                uap = malloc(sizeof (unavailpool_t));
                uap->uap_zhp = zhp;
                list_insert_tail((list_t *)data, uap);
        } else {
                zpool_close(zhp);
        }
        return (0);
}

/*
 * The device associated with the given vdev (either by devid or physical path)
 * has been added to the system.  If 'isdisk' is set, then we only attempt a
 * replacement if it's a whole disk.  This also implies that we should label the
 * disk first.
 *
 * First, we attempt to online the device (making sure to undo any spare
 * operation when finished).  If this succeeds, then we're done.  If it fails,
 * and the new state is VDEV_CANT_OPEN, it indicates that the device was opened,
 * but that the label was not what we expected.  If the 'autoreplace' property
 * is not set, then we relabel the disk (if specified), and attempt a 'zpool
 * replace'.  If the online is successful, but the new state is something else
 * (REMOVED or FAULTED), it indicates that we're out of sync or in some sort of
 * race, and we should avoid attempting to relabel the disk.
 */
static void
zfs_process_add(zpool_handle_t *zhp, nvlist_t *vdev, boolean_t isdisk)
{
        char *path;
        vdev_state_t newstate;
        nvlist_t *nvroot, *newvd;
        uint64_t wholedisk = 0ULL;
        uint64_t offline = 0ULL;
        char *physpath = NULL;
        char rawpath[PATH_MAX], fullpath[PATH_MAX];
        zpool_boot_label_t boot_type;
        uint64_t boot_size;
        size_t len;

        if (nvlist_lookup_string(vdev, ZPOOL_CONFIG_PATH, &path) != 0)
                return;

        (void) nvlist_lookup_string(vdev, ZPOOL_CONFIG_PHYS_PATH, &physpath);
        (void) nvlist_lookup_uint64(vdev, ZPOOL_CONFIG_WHOLE_DISK, &wholedisk);
        (void) nvlist_lookup_uint64(vdev, ZPOOL_CONFIG_OFFLINE, &offline);

        /*
         * We should have a way to online a device by guid.  With the current
         * interface, we are forced to chop off the 's0' for whole disks.
         */
        (void) strlcpy(fullpath, path, sizeof (fullpath));
        if (wholedisk)
                fullpath[strlen(fullpath) - 2] = '\0';

        /*
         * Attempt to online the device.  It would be nice to online this by
         * GUID, but the current interface only supports lookup by path.
         */
        if (offline ||
            (zpool_vdev_online(zhp, fullpath,
            ZFS_ONLINE_CHECKREMOVE | ZFS_ONLINE_UNSPARE, &newstate) == 0 &&
            (newstate == VDEV_STATE_HEALTHY ||
            newstate == VDEV_STATE_DEGRADED)))
                return;

        /*
         * If the pool doesn't have the autoreplace property set, then attempt a
         * true online (without the unspare flag), which will trigger a FMA
         * fault.
         */
        if (!zpool_get_prop_int(zhp, ZPOOL_PROP_AUTOREPLACE, NULL) ||
            (isdisk && !wholedisk)) {
                (void) zpool_vdev_online(zhp, fullpath, ZFS_ONLINE_FORCEFAULT,
                    &newstate);
                return;
        }

        if (isdisk) {
                /*
                 * If this is a request to label a whole disk, then attempt to
                 * write out the label.  Before we can label the disk, we need
                 * access to a raw node.  Ideally, we'd like to walk the devinfo
                 * tree and find a raw node from the corresponding parent node.
                 * This is overly complicated, and since we know how we labeled
                 * this device in the first place, we know it's save to switch
                 * from /dev/dsk to /dev/rdsk and append the backup slice.
                 *
                 * If any part of this process fails, then do a force online to
                 * trigger a ZFS fault for the device (and any hot spare
                 * replacement).
                 */
                if (strncmp(path, ZFS_DISK_ROOTD,
                    strlen(ZFS_DISK_ROOTD)) != 0) {
                        (void) zpool_vdev_online(zhp, fullpath,
                            ZFS_ONLINE_FORCEFAULT, &newstate);
                        return;
                }

                (void) strlcpy(rawpath, path + 9, sizeof (rawpath));
                len = strlen(rawpath);
                rawpath[len - 2] = '\0';

                if (zpool_is_bootable(zhp))
                        boot_type = ZPOOL_COPY_BOOT_LABEL;
                else
                        boot_type = ZPOOL_NO_BOOT_LABEL;

                boot_size = zpool_get_prop_int(zhp, ZPOOL_PROP_BOOTSIZE, NULL);
                if (zpool_label_disk(g_zfshdl, zhp, rawpath,
                    boot_type, boot_size, NULL) != 0) {
                        (void) zpool_vdev_online(zhp, fullpath,
                            ZFS_ONLINE_FORCEFAULT, &newstate);
                        return;
                }
        }

        /*
         * Cosntruct the root vdev to pass to zpool_vdev_attach().  While adding
         * the entire vdev structure is harmless, we construct a reduced set of
         * path/physpath/wholedisk to keep it simple.
         */
        if (nvlist_alloc(&nvroot, NV_UNIQUE_NAME, 0) != 0)
                return;

        if (nvlist_alloc(&newvd, NV_UNIQUE_NAME, 0) != 0) {
                nvlist_free(nvroot);
                return;
        }

        if (nvlist_add_string(newvd, ZPOOL_CONFIG_TYPE, VDEV_TYPE_DISK) != 0 ||
            nvlist_add_string(newvd, ZPOOL_CONFIG_PATH, path) != 0 ||
            (physpath != NULL && nvlist_add_string(newvd,
            ZPOOL_CONFIG_PHYS_PATH, physpath) != 0) ||
            nvlist_add_uint64(newvd, ZPOOL_CONFIG_WHOLE_DISK, wholedisk) != 0 ||
            nvlist_add_string(nvroot, ZPOOL_CONFIG_TYPE, VDEV_TYPE_ROOT) != 0 ||
            nvlist_add_nvlist_array(nvroot, ZPOOL_CONFIG_CHILDREN, &newvd,
            1) != 0) {
                nvlist_free(newvd);
                nvlist_free(nvroot);
                return;
        }

        nvlist_free(newvd);

        (void) zpool_vdev_attach(zhp, fullpath, path, nvroot, B_TRUE);

        nvlist_free(nvroot);

}

/*
 * Utility functions to find a vdev matching given criteria.
 */
typedef struct dev_data {
        const char              *dd_compare;
        const char              *dd_prop;
        zfs_process_func_t      dd_func;
        boolean_t               dd_found;
        boolean_t               dd_isdisk;
        uint64_t                dd_pool_guid;
        uint64_t                dd_vdev_guid;
} dev_data_t;

static void
zfs_iter_vdev(zpool_handle_t *zhp, nvlist_t *nvl, void *data)
{
        dev_data_t *dp = data;
        char *path;
        uint_t c, children;
        nvlist_t **child;
        size_t len;
        uint64_t guid;

        /*
         * First iterate over any children.
         */
        if (nvlist_lookup_nvlist_array(nvl, ZPOOL_CONFIG_CHILDREN,
            &child, &children) == 0) {
                for (c = 0; c < children; c++)
                        zfs_iter_vdev(zhp, child[c], data);
                return;
        }

        if (dp->dd_vdev_guid != 0) {
                if (nvlist_lookup_uint64(nvl, ZPOOL_CONFIG_GUID,
                    &guid) != 0 || guid != dp->dd_vdev_guid)
                        return;
        } else if (dp->dd_compare != NULL) {
                len = strlen(dp->dd_compare);

                if (nvlist_lookup_string(nvl, dp->dd_prop, &path) != 0 ||
                    strncmp(dp->dd_compare, path, len) != 0)
                        return;

                /*
                 * Normally, we want to have an exact match for the comparison
                 * string.  However, we allow substring matches in the following
                 * cases:
                 *
                 *      <path>:         This is a devpath, and the target is one
                 *                      of its children.
                 *
                 *      <path/>         This is a devid for a whole disk, and
                 *                      the target is one of its children.
                 */
                if (path[len] != '\0' && path[len] != ':' &&
                    path[len - 1] != '/')
                        return;
        }

        (dp->dd_func)(zhp, nvl, dp->dd_isdisk);
}

void
zfs_enable_ds(void *arg)
{
        unavailpool_t *pool = (unavailpool_t *)arg;

        (void) zpool_enable_datasets(pool->uap_zhp, NULL, 0);
        zpool_close(pool->uap_zhp);
        free(pool);
}

static int
zfs_iter_pool(zpool_handle_t *zhp, void *data)
{
        nvlist_t *config, *nvl;
        dev_data_t *dp = data;
        uint64_t pool_guid;
        unavailpool_t *pool;

        if ((config = zpool_get_config(zhp, NULL)) != NULL) {
                if (dp->dd_pool_guid == 0 ||
                    (nvlist_lookup_uint64(config, ZPOOL_CONFIG_POOL_GUID,
                    &pool_guid) == 0 && pool_guid == dp->dd_pool_guid)) {
                        (void) nvlist_lookup_nvlist(config,
                            ZPOOL_CONFIG_VDEV_TREE, &nvl);
                        zfs_iter_vdev(zhp, nvl, data);
                }
        }
        if (g_enumeration_done)  {
                for (pool = list_head(&g_pool_list); pool != NULL;
                    pool = list_next(&g_pool_list, pool)) {

                        if (strcmp(zpool_get_name(zhp),
                            zpool_get_name(pool->uap_zhp)))
                                continue;
                        if (zfs_toplevel_state(zhp) >= VDEV_STATE_DEGRADED) {
                                list_remove(&g_pool_list, pool);
                                (void) tpool_dispatch(g_tpool, zfs_enable_ds,
                                    pool);
                                break;
                        }
                }
        }

        zpool_close(zhp);
        return (0);
}

/*
 * Given a physical device path, iterate over all (pool, vdev) pairs which
 * correspond to the given path.
 */
static boolean_t
devpath_iter(const char *devpath, zfs_process_func_t func, boolean_t wholedisk)
{
        dev_data_t data = { 0 };

        data.dd_compare = devpath;
        data.dd_func = func;
        data.dd_prop = ZPOOL_CONFIG_PHYS_PATH;
        data.dd_found = B_FALSE;
        data.dd_isdisk = wholedisk;

        (void) zpool_iter(g_zfshdl, zfs_iter_pool, &data);

        return (data.dd_found);
}

/*
 * Given a /devices path, lookup the corresponding devid for each minor node,
 * and find any vdevs with matching devids.  Doing this straight up would be
 * rather inefficient, O(minor nodes * vdevs in system), so we take advantage of
 * the fact that each devid ends with "/<minornode>".  Once we find any valid
 * minor node, we chop off the portion after the last slash, and then search for
 * matching vdevs, which is O(vdevs in system).
 */
static boolean_t
devid_iter(const char *devpath, zfs_process_func_t func, boolean_t wholedisk)
{
        size_t len = strlen(devpath) + sizeof ("/devices") +
            sizeof (PHYS_PATH) - 1;
        char *fullpath;
        int fd;
        ddi_devid_t devid;
        char *devidstr, *fulldevid;
        dev_data_t data = { 0 };

        /*
         * Try to open a known minor node.
         */
        fullpath = alloca(len);
        (void) snprintf(fullpath, len, "/devices%s%s", devpath, PHYS_PATH);
        if ((fd = open(fullpath, O_RDONLY)) < 0)
                return (B_FALSE);

        /*
         * Determine the devid as a string, with no trailing slash for the minor
         * node.
         */
        if (devid_get(fd, &devid) != 0) {
                (void) close(fd);
                return (B_FALSE);
        }
        (void) close(fd);

        if ((devidstr = devid_str_encode(devid, NULL)) == NULL) {
                devid_free(devid);
                return (B_FALSE);
        }

        len = strlen(devidstr) + 2;
        fulldevid = alloca(len);
        (void) snprintf(fulldevid, len, "%s/", devidstr);

        data.dd_compare = fulldevid;
        data.dd_func = func;
        data.dd_prop = ZPOOL_CONFIG_DEVID;
        data.dd_found = B_FALSE;
        data.dd_isdisk = wholedisk;

        (void) zpool_iter(g_zfshdl, zfs_iter_pool, &data);

        devid_str_free(devidstr);
        devid_free(devid);

        return (data.dd_found);
}

/*
 * This function is called when we receive a devfs add event.  This can be
 * either a disk event or a lofi event, and the behavior is slightly different
 * depending on which it is.
 */
static int
zfs_deliver_add(nvlist_t *nvl, boolean_t is_lofi)
{
        char *devpath, *devname;
        char path[PATH_MAX], realpath[PATH_MAX];
        char *colon, *raw;
        int ret;

        /*
         * The main unit of operation is the physical device path.  For disks,
         * this is the device node, as all minor nodes are affected.  For lofi
         * devices, this includes the minor path.  Unfortunately, this isn't
         * represented in the DEV_PHYS_PATH for various reasons.
         */
        if (nvlist_lookup_string(nvl, DEV_PHYS_PATH, &devpath) != 0)
                return (-1);

        /*
         * If this is a lofi device, then also get the minor instance name.
         * Unfortunately, the current payload doesn't include an easy way to get
         * this information.  So we cheat by resolving the 'dev_name' (which
         * refers to the raw device) and taking the portion between ':(*),raw'.
         */
        (void) strlcpy(realpath, devpath, sizeof (realpath));
        if (is_lofi) {
                if (nvlist_lookup_string(nvl, DEV_NAME,
                    &devname) == 0 &&
                    (ret = resolvepath(devname, path,
                    sizeof (path))) > 0) {
                        path[ret] = '\0';
                        colon = strchr(path, ':');
                        if (colon != NULL)
                                raw = strstr(colon + 1, ",raw");
                        if (colon != NULL && raw != NULL) {
                                *raw = '\0';
                                (void) snprintf(realpath,
                                    sizeof (realpath), "%s%s",
                                    devpath, colon);
                                *raw = ',';
                        }
                }
        }

        /*
         * Iterate over all vdevs with a matching devid, and then those with a
         * matching /devices path.  For disks, we only want to pay attention to
         * vdevs marked as whole disks.  For lofi, we don't care (because we're
         * matching an exact minor name).
         */
        if (!devid_iter(realpath, zfs_process_add, !is_lofi))
                (void) devpath_iter(realpath, zfs_process_add, !is_lofi);

        return (0);
}

/*
 * Called when we receive a VDEV_CHECK event, which indicates a device could not
 * be opened during initial pool open, but the autoreplace property was set on
 * the pool.  In this case, we treat it as if it were an add event.
 */
static int
zfs_deliver_check(nvlist_t *nvl)
{
        dev_data_t data = { 0 };

        if (nvlist_lookup_uint64(nvl, ZFS_EV_POOL_GUID,
            &data.dd_pool_guid) != 0 ||
            nvlist_lookup_uint64(nvl, ZFS_EV_VDEV_GUID,
            &data.dd_vdev_guid) != 0 ||
            data.dd_vdev_guid == 0)
                return (0);

        data.dd_isdisk = B_TRUE;
        data.dd_func = zfs_process_add;

        (void) zpool_iter(g_zfshdl, zfs_iter_pool, &data);

        return (0);
}

#define DEVICE_PREFIX   "/devices"

static int
zfsdle_vdev_online(zpool_handle_t *zhp, void *data)
{
        char *devname = data;
        boolean_t avail_spare, l2cache;
        vdev_state_t newstate;
        nvlist_t *tgt;

        syseventd_print(9, "zfsdle_vdev_online: searching for %s in pool %s\n",
            devname, zpool_get_name(zhp));

        if ((tgt = zpool_find_vdev_by_physpath(zhp, devname,
            &avail_spare, &l2cache, NULL)) != NULL) {
                char *path, fullpath[MAXPATHLEN];
                uint64_t wholedisk = 0ULL;

                verify(nvlist_lookup_string(tgt, ZPOOL_CONFIG_PATH,
                    &path) == 0);
                verify(nvlist_lookup_uint64(tgt, ZPOOL_CONFIG_WHOLE_DISK,
                    &wholedisk) == 0);

                (void) strlcpy(fullpath, path, sizeof (fullpath));
                if (wholedisk) {
                        fullpath[strlen(fullpath) - 2] = '\0';

                        /*
                         * We need to reopen the pool associated with this
                         * device so that the kernel can update the size
                         * of the expanded device.
                         */
                        (void) zpool_reopen(zhp);
                }

                if (zpool_get_prop_int(zhp, ZPOOL_PROP_AUTOEXPAND, NULL)) {
                        syseventd_print(9, "zfsdle_vdev_online: setting device"
                            " device %s to ONLINE state in pool %s.\n",
                            fullpath, zpool_get_name(zhp));
                        if (zpool_get_state(zhp) != POOL_STATE_UNAVAIL)
                                (void) zpool_vdev_online(zhp, fullpath, 0,
                                    &newstate);
                }
                zpool_close(zhp);
                return (1);
        }
        zpool_close(zhp);
        return (0);
}

/*
 * This function is called for each vdev of a pool for which any of the
 * following events was recieved:
 *  - ESC_ZFS_vdev_add
 *  - ESC_ZFS_vdev_attach
 *  - ESC_ZFS_vdev_clear
 *  - ESC_ZFS_vdev_online
 *  - ESC_ZFS_pool_create
 *  - ESC_ZFS_pool_import
 * It will update the vdevs FRU property if it is out of date.
 */
/*ARGSUSED2*/
static void
zfs_update_vdev_fru(zpool_handle_t *zhp, nvlist_t *vdev, boolean_t isdisk)
{
        char *devpath, *cptr, *oldfru = NULL;
        const char *newfru;
        uint64_t vdev_guid;

        (void) nvlist_lookup_uint64(vdev, ZPOOL_CONFIG_GUID, &vdev_guid);
        (void) nvlist_lookup_string(vdev, ZPOOL_CONFIG_PHYS_PATH, &devpath);
        (void) nvlist_lookup_string(vdev, ZPOOL_CONFIG_FRU, &oldfru);

        /* remove :<slice> from devpath */
        cptr = strrchr(devpath, ':');
        if (cptr != NULL)
                *cptr = '\0';

        newfru = libzfs_fru_lookup(g_zfshdl, devpath);
        if (newfru == NULL) {
                syseventd_print(9, "zfs_update_vdev_fru: no FRU for %s\n",
                    devpath);
                return;
        }

        /* do nothing if the FRU hasn't changed */
        if (oldfru != NULL && libzfs_fru_compare(g_zfshdl, oldfru, newfru)) {
                syseventd_print(9, "zfs_update_vdev_fru: FRU unchanged\n");
                return;
        }

        syseventd_print(9, "zfs_update_vdev_fru: devpath = %s\n", devpath);
        syseventd_print(9, "zfs_update_vdev_fru: FRU = %s\n", newfru);

        (void) zpool_fru_set(zhp, vdev_guid, newfru);
}

/*
 * This function handles the following events:
 *  - ESC_ZFS_vdev_add
 *  - ESC_ZFS_vdev_attach
 *  - ESC_ZFS_vdev_clear
 *  - ESC_ZFS_vdev_online
 *  - ESC_ZFS_pool_create
 *  - ESC_ZFS_pool_import
 * It will iterate over the pool vdevs to update the FRU property.
 */
int
zfs_deliver_update(nvlist_t *nvl)
{
        dev_data_t dd = { 0 };
        char *pname;
        zpool_handle_t *zhp;
        nvlist_t *config, *vdev;

        if (nvlist_lookup_string(nvl, "pool_name", &pname) != 0) {
                syseventd_print(9, "zfs_deliver_update: no pool name\n");
                return (-1);
        }

        /*
         * If this event was triggered by a pool export or destroy we cannot
         * open the pool. This is not an error, just return 0 as we don't care
         * about these events.
         */
        zhp = zpool_open_canfail(g_zfshdl, pname);
        if (zhp == NULL)
                return (0);

        config = zpool_get_config(zhp, NULL);
        if (config == NULL) {
                syseventd_print(9, "zfs_deliver_update: "
                    "failed to get pool config for %s\n", pname);
                zpool_close(zhp);
                return (-1);
        }

        if (nvlist_lookup_nvlist(config, ZPOOL_CONFIG_VDEV_TREE, &vdev) != 0) {
                syseventd_print(0, "zfs_deliver_update: "
                    "failed to get vdev tree for %s\n", pname);
                zpool_close(zhp);
                return (-1);
        }

        libzfs_fru_refresh(g_zfshdl);

        dd.dd_func = zfs_update_vdev_fru;
        zfs_iter_vdev(zhp, vdev, &dd);

        zpool_close(zhp);
        return (0);
}

int
zfs_deliver_dle(nvlist_t *nvl)
{
        char *devname;
        if (nvlist_lookup_string(nvl, DEV_PHYS_PATH, &devname) != 0) {
                syseventd_print(9, "zfs_deliver_event: no physpath\n");
                return (-1);
        }
        if (strncmp(devname, DEVICE_PREFIX, strlen(DEVICE_PREFIX)) != 0) {
                syseventd_print(9, "zfs_deliver_event: invalid "
                    "device '%s'", devname);
                return (-1);
        }

        /*
         * We try to find the device using the physical
         * path that has been supplied. We need to strip off
         * the /devices prefix before starting our search.
         */
        devname += strlen(DEVICE_PREFIX);
        if (zpool_iter(g_zfshdl, zfsdle_vdev_online, devname) != 1) {
                syseventd_print(9, "zfs_deliver_event: device '%s' not"
                    " found\n", devname);
                return (1);
        }
        return (0);
}


/*ARGSUSED*/
static int
zfs_deliver_event(sysevent_t *ev, int unused)
{
        const char *class = sysevent_get_class_name(ev);
        const char *subclass = sysevent_get_subclass_name(ev);
        nvlist_t *nvl;
        int ret;
        boolean_t is_lofi = B_FALSE, is_check = B_FALSE;
        boolean_t is_dle = B_FALSE, is_update = B_FALSE;

        if (strcmp(class, EC_DEV_ADD) == 0) {
                /*
                 * We're mainly interested in disk additions, but we also listen
                 * for new lofi devices, to allow for simplified testing.
                 */
                if (strcmp(subclass, ESC_DISK) == 0)
                        is_lofi = B_FALSE;
                else if (strcmp(subclass, ESC_LOFI) == 0)
                        is_lofi = B_TRUE;
                else
                        return (0);

                is_check = B_FALSE;
        } else if (strcmp(class, EC_ZFS) == 0) {
                if (strcmp(subclass, ESC_ZFS_VDEV_CHECK) == 0) {
                        /*
                         * This event signifies that a device failed to open
                         * during pool load, but the 'autoreplace' property was
                         * set, so we should pretend it's just been added.
                         */
                        is_check = B_TRUE;
                } else if ((strcmp(subclass, ESC_ZFS_VDEV_ADD) == 0) ||
                    (strcmp(subclass, ESC_ZFS_VDEV_ATTACH) == 0) ||
                    (strcmp(subclass, ESC_ZFS_VDEV_CLEAR) == 0) ||
                    (strcmp(subclass, ESC_ZFS_VDEV_ONLINE) == 0) ||
                    (strcmp(subclass, ESC_ZFS_POOL_CREATE) == 0) ||
                    (strcmp(subclass, ESC_ZFS_POOL_IMPORT) == 0)) {
                        /*
                         * When we receive these events we check the pool
                         * configuration and update the vdev FRUs if necessary.
                         */
                        is_update = B_TRUE;
                }
        } else if (strcmp(class, EC_DEV_STATUS) == 0 &&
            strcmp(subclass, ESC_DEV_DLE) == 0) {
                is_dle = B_TRUE;
        } else {
                return (0);
        }

        if (sysevent_get_attr_list(ev, &nvl) != 0)
                return (-1);

        if (is_dle)
                ret = zfs_deliver_dle(nvl);
        else if (is_update)
                ret = zfs_deliver_update(nvl);
        else if (is_check)
                ret = zfs_deliver_check(nvl);
        else
                ret = zfs_deliver_add(nvl, is_lofi);

        nvlist_free(nvl);
        return (ret);
}

/*ARGSUSED*/
void *
zfs_enum_pools(void *arg)
{
        (void) zpool_iter(g_zfshdl, zfs_unavail_pool, (void *)&g_pool_list);
        if (!list_is_empty(&g_pool_list))
                g_tpool = tpool_create(1, sysconf(_SC_NPROCESSORS_ONLN),
                    0, NULL);
        g_enumeration_done = B_TRUE;
        return (NULL);
}

static struct slm_mod_ops zfs_mod_ops = {
        SE_MAJOR_VERSION, SE_MINOR_VERSION, 10, zfs_deliver_event
};

struct slm_mod_ops *
slm_init()
{
        if ((g_zfshdl = libzfs_init()) == NULL)
                return (NULL);
        /*
         * collect a list of unavailable pools (asynchronously,
         * since this can take a while)
         */
        list_create(&g_pool_list, sizeof (struct unavailpool),
            offsetof(struct unavailpool, uap_node));
        if (thr_create(NULL, 0, zfs_enum_pools, NULL, 0, &g_zfs_tid) != 0)
                return (NULL);
        return (&zfs_mod_ops);
}

void
slm_fini()
{
        unavailpool_t *pool;

        (void) thr_join(g_zfs_tid, NULL, NULL);
        if (g_tpool != NULL) {
                tpool_wait(g_tpool);
                tpool_destroy(g_tpool);
        }
        while ((pool = (list_head(&g_pool_list))) != NULL) {
                list_remove(&g_pool_list, pool);
                zpool_close(pool->uap_zhp);
                free(pool);
        }
        list_destroy(&g_pool_list);
        libzfs_fini(g_zfshdl);
}