usr/src/uts/intel/io/acpica/dispatcher/dswload.c

   1 /******************************************************************************
   2  *
   3  * Module Name: dswload - Dispatcher first pass namespace load callbacks
   4  *
   5  *****************************************************************************/
   6
   7 /*
   8  * Copyright (C) 2000 - 2016, Intel Corp.
   9  * All rights reserved.
  10  *
  11  * Redistribution and use in source and binary forms, with or without
  12  * modification, are permitted provided that the following conditions
  13  * are met:
  14  * 1. Redistributions of source code must retain the above copyright
  15  *    notice, this list of conditions, and the following disclaimer,
  16  *    without modification.
  17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  18  *    substantially similar to the "NO WARRANTY" disclaimer below
  19  *    ("Disclaimer") and any redistribution must be conditioned upon
  20  *    including a substantially similar Disclaimer requirement for further
  21  *    binary redistribution.
  22  * 3. Neither the names of the above-listed copyright holders nor the names
  23  *    of any contributors may be used to endorse or promote products derived
  24  *    from this software without specific prior written permission.
  25  *
  26  * Alternatively, this software may be distributed under the terms of the
  27  * GNU General Public License ("GPL") version 2 as published by the Free
  28  * Software Foundation.
  29  *
  30  * NO WARRANTY
  31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  41  * POSSIBILITY OF SUCH DAMAGES.
  42  */
  43
  44 #include "acpi.h"
  45 #include "accommon.h"
  46 #include "acparser.h"
  47 #include "amlcode.h"
  48 #include "acdispat.h"
  49 #include "acinterp.h"
  50 #include "acnamesp.h"
  51
  52 #ifdef ACPI_ASL_COMPILER
  53 #include "acdisasm.h"
  54 #endif
  55
  56 #define _COMPONENT          ACPI_DISPATCHER
  57         ACPI_MODULE_NAME    ("dswload")
  58
  59
  60 /*******************************************************************************
  61  *
  62  * FUNCTION:    AcpiDsInitCallbacks
  63  *
  64  * PARAMETERS:  WalkState       - Current state of the parse tree walk
  65  *              PassNumber      - 1, 2, or 3
  66  *
  67  * RETURN:      Status
  68  *
  69  * DESCRIPTION: Init walk state callbacks
  70  *
  71  ******************************************************************************/
  72
  73 ACPI_STATUS
  74 AcpiDsInitCallbacks (
  75     ACPI_WALK_STATE         *WalkState,
  76     UINT32                  PassNumber)
  77 {
  78
  79     switch (PassNumber)
  80     {
  81     case 0:
  82
  83         /* Parse only - caller will setup callbacks */
  84
  85         WalkState->ParseFlags         = ACPI_PARSE_LOAD_PASS1 |
  86                                         ACPI_PARSE_DELETE_TREE |
  87                                         ACPI_PARSE_DISASSEMBLE;
  88         WalkState->DescendingCallback = NULL;
  89         WalkState->AscendingCallback  = NULL;
  90         break;
  91
  92     case 1:
  93
  94         /* Load pass 1 */
  95
  96         WalkState->ParseFlags         = ACPI_PARSE_LOAD_PASS1 |
  97                                         ACPI_PARSE_DELETE_TREE;
  98         WalkState->DescendingCallback = AcpiDsLoad1BeginOp;
  99         WalkState->AscendingCallback  = AcpiDsLoad1EndOp;
 100         break;
 101
 102     case 2:
 103
 104         /* Load pass 2 */
 105
 106         WalkState->ParseFlags         = ACPI_PARSE_LOAD_PASS1 |
 107                                         ACPI_PARSE_DELETE_TREE;
 108         WalkState->DescendingCallback = AcpiDsLoad2BeginOp;
 109         WalkState->AscendingCallback  = AcpiDsLoad2EndOp;
 110         break;
 111
 112     case 3:
 113
 114         /* Execution pass */
 115
 116 #ifndef ACPI_NO_METHOD_EXECUTION
 117         WalkState->ParseFlags        |= ACPI_PARSE_EXECUTE  |
 118                                         ACPI_PARSE_DELETE_TREE;
 119         WalkState->DescendingCallback = AcpiDsExecBeginOp;
 120         WalkState->AscendingCallback  = AcpiDsExecEndOp;
 121 #endif
 122         break;
 123
 124     default:
 125
 126         return (AE_BAD_PARAMETER);
 127     }
 128
 129     return (AE_OK);
 130 }
 131
 132
 133 /*******************************************************************************
 134  *
 135  * FUNCTION:    AcpiDsLoad1BeginOp
 136  *
 137  * PARAMETERS:  WalkState       - Current state of the parse tree walk
 138  *              OutOp           - Where to return op if a new one is created
 139  *
 140  * RETURN:      Status
 141  *
 142  * DESCRIPTION: Descending callback used during the loading of ACPI tables.
 143  *
 144  ******************************************************************************/
 145
 146 ACPI_STATUS
 147 AcpiDsLoad1BeginOp (
 148     ACPI_WALK_STATE         *WalkState,
 149     ACPI_PARSE_OBJECT       **OutOp)
 150 {
 151     ACPI_PARSE_OBJECT       *Op;
 152     ACPI_NAMESPACE_NODE     *Node;
 153     ACPI_STATUS             Status;
 154     ACPI_OBJECT_TYPE        ObjectType;
 155     char                    *Path;
 156     UINT32                  Flags;
 157
 158
 159     ACPI_FUNCTION_TRACE (DsLoad1BeginOp);
 160
 161
 162     Op = WalkState->Op;
 163     ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH, "Op=%p State=%p\n", Op, WalkState));
 164
 165     /* We are only interested in opcodes that have an associated name */
 166
 167     if (Op)
 168     {
 169         if (!(WalkState->OpInfo->Flags & AML_NAMED))
 170         {
 171             *OutOp = Op;
 172             return_ACPI_STATUS (AE_OK);
 173         }
 174
 175         /* Check if this object has already been installed in the namespace */
 176
 177         if (Op->Common.Node)
 178         {
 179             *OutOp = Op;
 180             return_ACPI_STATUS (AE_OK);
 181         }
 182     }
 183
 184     Path = AcpiPsGetNextNamestring (&WalkState->ParserState);
 185
 186     /* Map the raw opcode into an internal object type */
 187
 188     ObjectType = WalkState->OpInfo->ObjectType;
 189
 190     ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH,
 191         "State=%p Op=%p [%s]\n", WalkState, Op,
 192         AcpiUtGetTypeName (ObjectType)));
 193
 194     switch (WalkState->Opcode)
 195     {
 196     case AML_SCOPE_OP:
 197         /*
 198          * The target name of the Scope() operator must exist at this point so
 199          * that we can actually open the scope to enter new names underneath it.
 200          * Allow search-to-root for single namesegs.
 201          */
 202         Status = AcpiNsLookup (WalkState->ScopeInfo, Path, ObjectType,
 203             ACPI_IMODE_EXECUTE, ACPI_NS_SEARCH_PARENT, WalkState, &(Node));
 204 #ifdef ACPI_ASL_COMPILER
 205         if (Status == AE_NOT_FOUND)
 206         {
 207             /*
 208              * Table disassembly:
 209              * Target of Scope() not found. Generate an External for it, and
 210              * insert the name into the namespace.
 211              */
 212             AcpiDmAddOpToExternalList (Op, Path, ACPI_TYPE_DEVICE, 0, 0);
 213             Status = AcpiNsLookup (WalkState->ScopeInfo, Path, ObjectType,
 214                ACPI_IMODE_LOAD_PASS1, ACPI_NS_SEARCH_PARENT,
 215                WalkState, &Node);
 216         }
 217 #endif
 218         if (ACPI_FAILURE (Status))
 219         {
 220             ACPI_ERROR_NAMESPACE (Path, Status);
 221             return_ACPI_STATUS (Status);
 222         }
 223
 224         /*
 225          * Check to make sure that the target is
 226          * one of the opcodes that actually opens a scope
 227          */
 228         switch (Node->Type)
 229         {
 230         case ACPI_TYPE_ANY:
 231         case ACPI_TYPE_LOCAL_SCOPE:         /* Scope  */
 232         case ACPI_TYPE_DEVICE:
 233         case ACPI_TYPE_POWER:
 234         case ACPI_TYPE_PROCESSOR:
 235         case ACPI_TYPE_THERMAL:
 236
 237             /* These are acceptable types */
 238             break;
 239
 240         case ACPI_TYPE_INTEGER:
 241         case ACPI_TYPE_STRING:
 242         case ACPI_TYPE_BUFFER:
 243             /*
 244              * These types we will allow, but we will change the type.
 245              * This enables some existing code of the form:
 246              *
 247              *  Name (DEB, 0)
 248              *  Scope (DEB) { ... }
 249              *
 250              * Note: silently change the type here. On the second pass,
 251              * we will report a warning
 252              */
 253             ACPI_DEBUG_PRINT ((ACPI_DB_INFO,
 254                 "Type override - [%4.4s] had invalid type (%s) "
 255                 "for Scope operator, changed to type ANY\n",
 256                 AcpiUtGetNodeName (Node), AcpiUtGetTypeName (Node->Type)));
 257
 258             Node->Type = ACPI_TYPE_ANY;
 259             WalkState->ScopeInfo->Common.Value = ACPI_TYPE_ANY;
 260             break;
 261
 262         case ACPI_TYPE_METHOD:
 263             /*
 264              * Allow scope change to root during execution of module-level
 265              * code. Root is typed METHOD during this time.
 266              */
 267             if ((Node == AcpiGbl_RootNode) &&
 268                 (WalkState->ParseFlags & ACPI_PARSE_MODULE_LEVEL))
 269             {
 270                 break;
 271             }
 272
 273             /*lint -fallthrough */
 274
 275         default:
 276
 277             /* All other types are an error */
 278
 279             ACPI_ERROR ((AE_INFO,
 280                 "Invalid type (%s) for target of "
 281                 "Scope operator [%4.4s] (Cannot override)",
 282                 AcpiUtGetTypeName (Node->Type), AcpiUtGetNodeName (Node)));
 283
 284             return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
 285         }
 286         break;
 287
 288     default:
 289         /*
 290          * For all other named opcodes, we will enter the name into
 291          * the namespace.
 292          *
 293          * Setup the search flags.
 294          * Since we are entering a name into the namespace, we do not want to
 295          * enable the search-to-root upsearch.
 296          *
 297          * There are only two conditions where it is acceptable that the name
 298          * already exists:
 299          *    1) the Scope() operator can reopen a scoping object that was
 300          *       previously defined (Scope, Method, Device, etc.)
 301          *    2) Whenever we are parsing a deferred opcode (OpRegion, Buffer,
 302          *       BufferField, or Package), the name of the object is already
 303          *       in the namespace.
 304          */
 305         if (WalkState->DeferredNode)
 306         {
 307             /* This name is already in the namespace, get the node */
 308
 309             Node = WalkState->DeferredNode;
 310             Status = AE_OK;
 311             break;
 312         }
 313
 314         /*
 315          * If we are executing a method, do not create any namespace objects
 316          * during the load phase, only during execution.
 317          */
 318         if (WalkState->MethodNode)
 319         {
 320             Node = NULL;
 321             Status = AE_OK;
 322             break;
 323         }
 324
 325         Flags = ACPI_NS_NO_UPSEARCH;
 326         if ((WalkState->Opcode != AML_SCOPE_OP) &&
 327             (!(WalkState->ParseFlags & ACPI_PARSE_DEFERRED_OP)))
 328         {
 329             if (WalkState->NamespaceOverride)
 330             {
 331                 Flags |= ACPI_NS_OVERRIDE_IF_FOUND;
 332                 ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH, "[%s] Override allowed\n",
 333                     AcpiUtGetTypeName (ObjectType)));
 334             }
 335             else
 336             {
 337                 Flags |= ACPI_NS_ERROR_IF_FOUND;
 338                 ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH, "[%s] Cannot already exist\n",
 339                     AcpiUtGetTypeName (ObjectType)));
 340             }
 341         }
 342         else
 343         {
 344             ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH,
 345                 "[%s] Both Find or Create allowed\n",
 346                 AcpiUtGetTypeName (ObjectType)));
 347         }
 348
 349         /*
 350          * Enter the named type into the internal namespace. We enter the name
 351          * as we go downward in the parse tree. Any necessary subobjects that
 352          * involve arguments to the opcode must be created as we go back up the
 353          * parse tree later.
 354          */
 355         Status = AcpiNsLookup (WalkState->ScopeInfo, Path, ObjectType,
 356             ACPI_IMODE_LOAD_PASS1, Flags, WalkState, &Node);
 357         if (ACPI_FAILURE (Status))
 358         {
 359             if (Status == AE_ALREADY_EXISTS)
 360             {
 361                 /* The name already exists in this scope */
 362
 363                 if (Node->Flags & ANOBJ_IS_EXTERNAL)
 364                 {
 365                     /*
 366                      * Allow one create on an object or segment that was
 367                      * previously declared External
 368                      */
 369                     Node->Flags &= ~ANOBJ_IS_EXTERNAL;
 370                     Node->Type = (UINT8) ObjectType;
 371
 372                     /* Just retyped a node, probably will need to open a scope */
 373
 374                     if (AcpiNsOpensScope (ObjectType))
 375                     {
 376                         Status = AcpiDsScopeStackPush (
 377                             Node, ObjectType, WalkState);
 378                         if (ACPI_FAILURE (Status))
 379                         {
 380                             return_ACPI_STATUS (Status);
 381                         }
 382                     }
 383
 384                     Status = AE_OK;
 385                 }
 386             }
 387
 388             if (ACPI_FAILURE (Status))
 389             {
 390                 ACPI_ERROR_NAMESPACE (Path, Status);
 391                 return_ACPI_STATUS (Status);
 392             }
 393         }
 394         break;
 395     }
 396
 397     /* Common exit */
 398
 399     if (!Op)
 400     {
 401         /* Create a new op */
 402
 403         Op = AcpiPsAllocOp (WalkState->Opcode, WalkState->Aml);
 404         if (!Op)
 405         {
 406             return_ACPI_STATUS (AE_NO_MEMORY);
 407         }
 408     }
 409
 410     /* Initialize the op */
 411
 412 #if (defined (ACPI_NO_METHOD_EXECUTION) || defined (ACPI_CONSTANT_EVAL_ONLY))
 413     Op->Named.Path = ACPI_CAST_PTR (UINT8, Path);
 414 #endif
 415
 416     if (Node)
 417     {
 418         /*
 419          * Put the Node in the "op" object that the parser uses, so we
 420          * can get it again quickly when this scope is closed
 421          */
 422         Op->Common.Node = Node;
 423         Op->Named.Name = Node->Name.Integer;
 424     }
 425
 426     AcpiPsAppendArg (AcpiPsGetParentScope (&WalkState->ParserState), Op);
 427     *OutOp = Op;
 428     return_ACPI_STATUS (Status);
 429 }
 430
 431
 432 /*******************************************************************************
 433  *
 434  * FUNCTION:    AcpiDsLoad1EndOp
 435  *
 436  * PARAMETERS:  WalkState       - Current state of the parse tree walk
 437  *
 438  * RETURN:      Status
 439  *
 440  * DESCRIPTION: Ascending callback used during the loading of the namespace,
 441  *              both control methods and everything else.
 442  *
 443  ******************************************************************************/
 444
 445 ACPI_STATUS
 446 AcpiDsLoad1EndOp (
 447     ACPI_WALK_STATE         *WalkState)
 448 {
 449     ACPI_PARSE_OBJECT       *Op;
 450     ACPI_OBJECT_TYPE        ObjectType;
 451     ACPI_STATUS             Status = AE_OK;
 452
 453
 454     ACPI_FUNCTION_TRACE (DsLoad1EndOp);
 455
 456
 457     Op = WalkState->Op;
 458     ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH, "Op=%p State=%p\n", Op, WalkState));
 459
 460     /* We are only interested in opcodes that have an associated name */
 461
 462     if (!(WalkState->OpInfo->Flags & (AML_NAMED | AML_FIELD)))
 463     {
 464         return_ACPI_STATUS (AE_OK);
 465     }
 466
 467     /* Get the object type to determine if we should pop the scope */
 468
 469     ObjectType = WalkState->OpInfo->ObjectType;
 470
 471 #ifndef ACPI_NO_METHOD_EXECUTION
 472     if (WalkState->OpInfo->Flags & AML_FIELD)
 473     {
 474         /*
 475          * If we are executing a method, do not create any namespace objects
 476          * during the load phase, only during execution.
 477          */
 478         if (!WalkState->MethodNode)
 479         {
 480             if (WalkState->Opcode == AML_FIELD_OP          ||
 481                 WalkState->Opcode == AML_BANK_FIELD_OP     ||
 482                 WalkState->Opcode == AML_INDEX_FIELD_OP)
 483             {
 484                 Status = AcpiDsInitFieldObjects (Op, WalkState);
 485             }
 486         }
 487         return_ACPI_STATUS (Status);
 488     }
 489
 490     /*
 491      * If we are executing a method, do not create any namespace objects
 492      * during the load phase, only during execution.
 493      */
 494     if (!WalkState->MethodNode)
 495     {
 496         if (Op->Common.AmlOpcode == AML_REGION_OP)
 497         {
 498             Status = AcpiExCreateRegion (Op->Named.Data, Op->Named.Length,
 499                 (ACPI_ADR_SPACE_TYPE)
 500                     ((Op->Common.Value.Arg)->Common.Value.Integer),
 501                 WalkState);
 502             if (ACPI_FAILURE (Status))
 503             {
 504                 return_ACPI_STATUS (Status);
 505             }
 506         }
 507         else if (Op->Common.AmlOpcode == AML_DATA_REGION_OP)
 508         {
 509             Status = AcpiExCreateRegion (Op->Named.Data, Op->Named.Length,
 510                 ACPI_ADR_SPACE_DATA_TABLE, WalkState);
 511             if (ACPI_FAILURE (Status))
 512             {
 513                 return_ACPI_STATUS (Status);
 514             }
 515         }
 516     }
 517 #endif
 518
 519     if (Op->Common.AmlOpcode == AML_NAME_OP)
 520     {
 521         /* For Name opcode, get the object type from the argument */
 522
 523         if (Op->Common.Value.Arg)
 524         {
 525             ObjectType = (AcpiPsGetOpcodeInfo (
 526                 (Op->Common.Value.Arg)->Common.AmlOpcode))->ObjectType;
 527
 528             /* Set node type if we have a namespace node */
 529
 530             if (Op->Common.Node)
 531             {
 532                 Op->Common.Node->Type = (UINT8) ObjectType;
 533             }
 534         }
 535     }
 536
 537     /*
 538      * If we are executing a method, do not create any namespace objects
 539      * during the load phase, only during execution.
 540      */
 541     if (!WalkState->MethodNode)
 542     {
 543         if (Op->Common.AmlOpcode == AML_METHOD_OP)
 544         {
 545             /*
 546              * MethodOp PkgLength NameString MethodFlags TermList
 547              *
 548              * Note: We must create the method node/object pair as soon as we
 549              * see the method declaration. This allows later pass1 parsing
 550              * of invocations of the method (need to know the number of
 551              * arguments.)
 552              */
 553             ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH,
 554                 "LOADING-Method: State=%p Op=%p NamedObj=%p\n",
 555                 WalkState, Op, Op->Named.Node));
 556
 557             if (!AcpiNsGetAttachedObject (Op->Named.Node))
 558             {
 559                 WalkState->Operands[0] = ACPI_CAST_PTR (void, Op->Named.Node);
 560                 WalkState->NumOperands = 1;
 561
 562                 Status = AcpiDsCreateOperands (
 563                     WalkState, Op->Common.Value.Arg);
 564                 if (ACPI_SUCCESS (Status))
 565                 {
 566                     Status = AcpiExCreateMethod (Op->Named.Data,
 567                         Op->Named.Length, WalkState);
 568                 }
 569
 570                 WalkState->Operands[0] = NULL;
 571                 WalkState->NumOperands = 0;
 572
 573                 if (ACPI_FAILURE (Status))
 574                 {
 575                     return_ACPI_STATUS (Status);
 576                 }
 577             }
 578         }
 579     }
 580
 581     /* Pop the scope stack (only if loading a table) */
 582
 583     if (!WalkState->MethodNode &&
 584         AcpiNsOpensScope (ObjectType))
 585     {
 586         ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH, "(%s): Popping scope for Op %p\n",
 587             AcpiUtGetTypeName (ObjectType), Op));
 588
 589         Status = AcpiDsScopeStackPop (WalkState);
 590     }
 591
 592     return_ACPI_STATUS (Status);
 593 }