usr/src/uts/intel/io/acpica/executer/exoparg6.c

   1 /******************************************************************************
   2  *
   3  * Module Name: exoparg6 - AML execution - opcodes with 6 arguments
   4  *
   5  *****************************************************************************/
   6
   7 /*
   8  * Copyright (C) 2000 - 2016, Intel Corp.
   9  * All rights reserved.
  10  *
  11  * Redistribution and use in source and binary forms, with or without
  12  * modification, are permitted provided that the following conditions
  13  * are met:
  14  * 1. Redistributions of source code must retain the above copyright
  15  *    notice, this list of conditions, and the following disclaimer,
  16  *    without modification.
  17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  18  *    substantially similar to the "NO WARRANTY" disclaimer below
  19  *    ("Disclaimer") and any redistribution must be conditioned upon
  20  *    including a substantially similar Disclaimer requirement for further
  21  *    binary redistribution.
  22  * 3. Neither the names of the above-listed copyright holders nor the names
  23  *    of any contributors may be used to endorse or promote products derived
  24  *    from this software without specific prior written permission.
  25  *
  26  * Alternatively, this software may be distributed under the terms of the
  27  * GNU General Public License ("GPL") version 2 as published by the Free
  28  * Software Foundation.
  29  *
  30  * NO WARRANTY
  31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  41  * POSSIBILITY OF SUCH DAMAGES.
  42  */
  43
  44 #include "acpi.h"
  45 #include "accommon.h"
  46 #include "acinterp.h"
  47 #include "acparser.h"
  48 #include "amlcode.h"
  49
  50
  51 #define _COMPONENT          ACPI_EXECUTER
  52         ACPI_MODULE_NAME    ("exoparg6")
  53
  54
  55 /*!
  56  * Naming convention for AML interpreter execution routines.
  57  *
  58  * The routines that begin execution of AML opcodes are named with a common
  59  * convention based upon the number of arguments, the number of target operands,
  60  * and whether or not a value is returned:
  61  *
  62  *      AcpiExOpcode_xA_yT_zR
  63  *
  64  * Where:
  65  *
  66  * xA - ARGUMENTS:    The number of arguments (input operands) that are
  67  *                    required for this opcode type (1 through 6 args).
  68  * yT - TARGETS:      The number of targets (output operands) that are required
  69  *                    for this opcode type (0, 1, or 2 targets).
  70  * zR - RETURN VALUE: Indicates whether this opcode type returns a value
  71  *                    as the function return (0 or 1).
  72  *
  73  * The AcpiExOpcode* functions are called via the Dispatcher component with
  74  * fully resolved operands.
  75 !*/
  76
  77 /* Local prototypes */
  78
  79 static BOOLEAN
  80 AcpiExDoMatch (
  81     UINT32                  MatchOp,
  82     ACPI_OPERAND_OBJECT     *PackageObj,
  83     ACPI_OPERAND_OBJECT     *MatchObj);
  84
  85
  86 /*******************************************************************************
  87  *
  88  * FUNCTION:    AcpiExDoMatch
  89  *
  90  * PARAMETERS:  MatchOp         - The AML match operand
  91  *              PackageObj      - Object from the target package
  92  *              MatchObj        - Object to be matched
  93  *
  94  * RETURN:      TRUE if the match is successful, FALSE otherwise
  95  *
  96  * DESCRIPTION: Implements the low-level match for the ASL Match operator.
  97  *              Package elements will be implicitly converted to the type of
  98  *              the match object (Integer/Buffer/String).
  99  *
 100  ******************************************************************************/
 101
 102 static BOOLEAN
 103 AcpiExDoMatch (
 104     UINT32                  MatchOp,
 105     ACPI_OPERAND_OBJECT     *PackageObj,
 106     ACPI_OPERAND_OBJECT     *MatchObj)
 107 {
 108     BOOLEAN                 LogicalResult = TRUE;
 109     ACPI_STATUS             Status;
 110
 111
 112     /*
 113      * Note: Since the PackageObj/MatchObj ordering is opposite to that of
 114      * the standard logical operators, we have to reverse them when we call
 115      * DoLogicalOp in order to make the implicit conversion rules work
 116      * correctly. However, this means we have to flip the entire equation
 117      * also. A bit ugly perhaps, but overall, better than fussing the
 118      * parameters around at runtime, over and over again.
 119      *
 120      * Below, P[i] refers to the package element, M refers to the Match object.
 121      */
 122     switch (MatchOp)
 123     {
 124     case MATCH_MTR:
 125
 126         /* Always true */
 127
 128         break;
 129
 130     case MATCH_MEQ:
 131         /*
 132          * True if equal: (P[i] == M)
 133          * Change to:     (M == P[i])
 134          */
 135         Status = AcpiExDoLogicalOp (
 136             AML_LEQUAL_OP, MatchObj, PackageObj, &LogicalResult);
 137         if (ACPI_FAILURE (Status))
 138         {
 139             return (FALSE);
 140         }
 141         break;
 142
 143     case MATCH_MLE:
 144         /*
 145          * True if less than or equal: (P[i] <= M) (P[i] NotGreater than M)
 146          * Change to:                  (M >= P[i]) (M NotLess than P[i])
 147          */
 148         Status = AcpiExDoLogicalOp (
 149             AML_LLESS_OP, MatchObj, PackageObj, &LogicalResult);
 150         if (ACPI_FAILURE (Status))
 151         {
 152             return (FALSE);
 153         }
 154         LogicalResult = (BOOLEAN) !LogicalResult;
 155         break;
 156
 157     case MATCH_MLT:
 158         /*
 159          * True if less than: (P[i] < M)
 160          * Change to:         (M > P[i])
 161          */
 162         Status = AcpiExDoLogicalOp (
 163             AML_LGREATER_OP, MatchObj, PackageObj, &LogicalResult);
 164         if (ACPI_FAILURE (Status))
 165         {
 166             return (FALSE);
 167         }
 168         break;
 169
 170     case MATCH_MGE:
 171         /*
 172          * True if greater than or equal: (P[i] >= M) (P[i] NotLess than M)
 173          * Change to:                     (M <= P[i]) (M NotGreater than P[i])
 174          */
 175         Status = AcpiExDoLogicalOp (
 176             AML_LGREATER_OP, MatchObj, PackageObj, &LogicalResult);
 177         if (ACPI_FAILURE (Status))
 178         {
 179             return (FALSE);
 180         }
 181         LogicalResult = (BOOLEAN)!LogicalResult;
 182         break;
 183
 184     case MATCH_MGT:
 185         /*
 186          * True if greater than: (P[i] > M)
 187          * Change to:            (M < P[i])
 188          */
 189         Status = AcpiExDoLogicalOp (
 190             AML_LLESS_OP, MatchObj, PackageObj, &LogicalResult);
 191         if (ACPI_FAILURE (Status))
 192         {
 193             return (FALSE);
 194         }
 195         break;
 196
 197     default:
 198
 199         /* Undefined */
 200
 201         return (FALSE);
 202     }
 203
 204     return (LogicalResult);
 205 }
 206
 207
 208 /*******************************************************************************
 209  *
 210  * FUNCTION:    AcpiExOpcode_6A_0T_1R
 211  *
 212  * PARAMETERS:  WalkState           - Current walk state
 213  *
 214  * RETURN:      Status
 215  *
 216  * DESCRIPTION: Execute opcode with 6 arguments, no target, and a return value
 217  *
 218  ******************************************************************************/
 219
 220 ACPI_STATUS
 221 AcpiExOpcode_6A_0T_1R (
 222     ACPI_WALK_STATE         *WalkState)
 223 {
 224     ACPI_OPERAND_OBJECT     **Operand = &WalkState->Operands[0];
 225     ACPI_OPERAND_OBJECT     *ReturnDesc = NULL;
 226     ACPI_STATUS             Status = AE_OK;
 227     UINT64                  Index;
 228     ACPI_OPERAND_OBJECT     *ThisElement;
 229
 230
 231     ACPI_FUNCTION_TRACE_STR (ExOpcode_6A_0T_1R,
 232         AcpiPsGetOpcodeName (WalkState->Opcode));
 233
 234
 235     switch (WalkState->Opcode)
 236     {
 237     case AML_MATCH_OP:
 238         /*
 239          * Match (SearchPkg[0], MatchOp1[1], MatchObj1[2],
 240          *                      MatchOp2[3], MatchObj2[4], StartIndex[5])
 241          */
 242
 243         /* Validate both Match Term Operators (MTR, MEQ, etc.) */
 244
 245         if ((Operand[1]->Integer.Value > MAX_MATCH_OPERATOR) ||
 246             (Operand[3]->Integer.Value > MAX_MATCH_OPERATOR))
 247         {
 248             ACPI_ERROR ((AE_INFO, "Match operator out of range"));
 249             Status = AE_AML_OPERAND_VALUE;
 250             goto Cleanup;
 251         }
 252
 253         /* Get the package StartIndex, validate against the package length */
 254
 255         Index = Operand[5]->Integer.Value;
 256         if (Index >= Operand[0]->Package.Count)
 257         {
 258             ACPI_ERROR ((AE_INFO,
 259                 "Index (0x%8.8X%8.8X) beyond package end (0x%X)",
 260                 ACPI_FORMAT_UINT64 (Index), Operand[0]->Package.Count));
 261             Status = AE_AML_PACKAGE_LIMIT;
 262             goto Cleanup;
 263         }
 264
 265         /* Create an integer for the return value */
 266         /* Default return value is ACPI_UINT64_MAX if no match found */
 267
 268         ReturnDesc = AcpiUtCreateIntegerObject (ACPI_UINT64_MAX);
 269         if (!ReturnDesc)
 270         {
 271             Status = AE_NO_MEMORY;
 272             goto Cleanup;
 273
 274         }
 275
 276         /*
 277          * Examine each element until a match is found. Both match conditions
 278          * must be satisfied for a match to occur. Within the loop,
 279          * "continue" signifies that the current element does not match
 280          * and the next should be examined.
 281          *
 282          * Upon finding a match, the loop will terminate via "break" at
 283          * the bottom. If it terminates "normally", MatchValue will be
 284          * ACPI_UINT64_MAX (Ones) (its initial value) indicating that no
 285          * match was found.
 286          */
 287         for ( ; Index < Operand[0]->Package.Count; Index++)
 288         {
 289             /* Get the current package element */
 290
 291             ThisElement = Operand[0]->Package.Elements[Index];
 292
 293             /* Treat any uninitialized (NULL) elements as non-matching */
 294
 295             if (!ThisElement)
 296             {
 297                 continue;
 298             }
 299
 300             /*
 301              * Both match conditions must be satisfied. Execution of a continue
 302              * (proceed to next iteration of enclosing for loop) signifies a
 303              * non-match.
 304              */
 305             if (!AcpiExDoMatch ((UINT32) Operand[1]->Integer.Value,
 306                     ThisElement, Operand[2]))
 307             {
 308                 continue;
 309             }
 310
 311             if (!AcpiExDoMatch ((UINT32) Operand[3]->Integer.Value,
 312                     ThisElement, Operand[4]))
 313             {
 314                 continue;
 315             }
 316
 317             /* Match found: Index is the return value */
 318
 319             ReturnDesc->Integer.Value = Index;
 320             break;
 321         }
 322         break;
 323
 324     case AML_LOAD_TABLE_OP:
 325
 326         Status = AcpiExLoadTableOp (WalkState, &ReturnDesc);
 327         break;
 328
 329     default:
 330
 331         ACPI_ERROR ((AE_INFO, "Unknown AML opcode 0x%X",
 332             WalkState->Opcode));
 333
 334         Status = AE_AML_BAD_OPCODE;
 335         goto Cleanup;
 336     }
 337
 338
 339 Cleanup:
 340
 341     /* Delete return object on error */
 342
 343     if (ACPI_FAILURE (Status))
 344     {
 345         AcpiUtRemoveReference (ReturnDesc);
 346     }
 347
 348     /* Save return object on success */
 349
 350     else
 351     {
 352         WalkState->ResultObj = ReturnDesc;
 353     }
 354
 355     return_ACPI_STATUS (Status);
 356 }