usr/src/uts/intel/io/acpica/executer/exstore.c

   1 /******************************************************************************
   2  *
   3  * Module Name: exstore - AML Interpreter object store support
   4  *
   5  *****************************************************************************/
   6
   7 /*
   8  * Copyright (C) 2000 - 2016, Intel Corp.
   9  * All rights reserved.
  10  *
  11  * Redistribution and use in source and binary forms, with or without
  12  * modification, are permitted provided that the following conditions
  13  * are met:
  14  * 1. Redistributions of source code must retain the above copyright
  15  *    notice, this list of conditions, and the following disclaimer,
  16  *    without modification.
  17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  18  *    substantially similar to the "NO WARRANTY" disclaimer below
  19  *    ("Disclaimer") and any redistribution must be conditioned upon
  20  *    including a substantially similar Disclaimer requirement for further
  21  *    binary redistribution.
  22  * 3. Neither the names of the above-listed copyright holders nor the names
  23  *    of any contributors may be used to endorse or promote products derived
  24  *    from this software without specific prior written permission.
  25  *
  26  * Alternatively, this software may be distributed under the terms of the
  27  * GNU General Public License ("GPL") version 2 as published by the Free
  28  * Software Foundation.
  29  *
  30  * NO WARRANTY
  31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  41  * POSSIBILITY OF SUCH DAMAGES.
  42  */
  43
  44 #include "acpi.h"
  45 #include "accommon.h"
  46 #include "acdispat.h"
  47 #include "acinterp.h"
  48 #include "amlcode.h"
  49 #include "acnamesp.h"
  50
  51
  52 #define _COMPONENT          ACPI_EXECUTER
  53         ACPI_MODULE_NAME    ("exstore")
  54
  55 /* Local prototypes */
  56
  57 static ACPI_STATUS
  58 AcpiExStoreObjectToIndex (
  59     ACPI_OPERAND_OBJECT     *ValDesc,
  60     ACPI_OPERAND_OBJECT     *DestDesc,
  61     ACPI_WALK_STATE         *WalkState);
  62
  63 static ACPI_STATUS
  64 AcpiExStoreDirectToNode (
  65     ACPI_OPERAND_OBJECT     *SourceDesc,
  66     ACPI_NAMESPACE_NODE     *Node,
  67     ACPI_WALK_STATE         *WalkState);
  68
  69
  70 /*******************************************************************************
  71  *
  72  * FUNCTION:    AcpiExStore
  73  *
  74  * PARAMETERS:  *SourceDesc         - Value to be stored
  75  *              *DestDesc           - Where to store it. Must be an NS node
  76  *                                    or ACPI_OPERAND_OBJECT of type
  77  *                                    Reference;
  78  *              WalkState           - Current walk state
  79  *
  80  * RETURN:      Status
  81  *
  82  * DESCRIPTION: Store the value described by SourceDesc into the location
  83  *              described by DestDesc. Called by various interpreter
  84  *              functions to store the result of an operation into
  85  *              the destination operand -- not just simply the actual "Store"
  86  *              ASL operator.
  87  *
  88  ******************************************************************************/
  89
  90 ACPI_STATUS
  91 AcpiExStore (
  92     ACPI_OPERAND_OBJECT     *SourceDesc,
  93     ACPI_OPERAND_OBJECT     *DestDesc,
  94     ACPI_WALK_STATE         *WalkState)
  95 {
  96     ACPI_STATUS             Status = AE_OK;
  97     ACPI_OPERAND_OBJECT     *RefDesc = DestDesc;
  98
  99
 100     ACPI_FUNCTION_TRACE_PTR (ExStore, DestDesc);
 101
 102
 103     /* Validate parameters */
 104
 105     if (!SourceDesc || !DestDesc)
 106     {
 107         ACPI_ERROR ((AE_INFO, "Null parameter"));
 108         return_ACPI_STATUS (AE_AML_NO_OPERAND);
 109     }
 110
 111     /* DestDesc can be either a namespace node or an ACPI object */
 112
 113     if (ACPI_GET_DESCRIPTOR_TYPE (DestDesc) == ACPI_DESC_TYPE_NAMED)
 114     {
 115         /*
 116          * Dest is a namespace node,
 117          * Storing an object into a Named node.
 118          */
 119         Status = AcpiExStoreObjectToNode (SourceDesc,
 120             (ACPI_NAMESPACE_NODE *) DestDesc, WalkState,
 121             ACPI_IMPLICIT_CONVERSION);
 122
 123         return_ACPI_STATUS (Status);
 124     }
 125
 126     /* Destination object must be a Reference or a Constant object */
 127
 128     switch (DestDesc->Common.Type)
 129     {
 130     case ACPI_TYPE_LOCAL_REFERENCE:
 131
 132         break;
 133
 134     case ACPI_TYPE_INTEGER:
 135
 136         /* Allow stores to Constants -- a Noop as per ACPI spec */
 137
 138         if (DestDesc->Common.Flags & AOPOBJ_AML_CONSTANT)
 139         {
 140             return_ACPI_STATUS (AE_OK);
 141         }
 142
 143         /*lint -fallthrough */
 144
 145     default:
 146
 147         /* Destination is not a Reference object */
 148
 149         ACPI_ERROR ((AE_INFO,
 150             "Target is not a Reference or Constant object - [%s] %p",
 151             AcpiUtGetObjectTypeName (DestDesc), DestDesc));
 152
 153         return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
 154     }
 155
 156     /*
 157      * Examine the Reference class. These cases are handled:
 158      *
 159      * 1) Store to Name (Change the object associated with a name)
 160      * 2) Store to an indexed area of a Buffer or Package
 161      * 3) Store to a Method Local or Arg
 162      * 4) Store to the debug object
 163      */
 164     switch (RefDesc->Reference.Class)
 165     {
 166     case ACPI_REFCLASS_REFOF:
 167
 168         /* Storing an object into a Name "container" */
 169
 170         Status = AcpiExStoreObjectToNode (SourceDesc,
 171             RefDesc->Reference.Object,
 172             WalkState, ACPI_IMPLICIT_CONVERSION);
 173         break;
 174
 175     case ACPI_REFCLASS_INDEX:
 176
 177         /* Storing to an Index (pointer into a packager or buffer) */
 178
 179         Status = AcpiExStoreObjectToIndex (SourceDesc, RefDesc, WalkState);
 180         break;
 181
 182     case ACPI_REFCLASS_LOCAL:
 183     case ACPI_REFCLASS_ARG:
 184
 185         /* Store to a method local/arg  */
 186
 187         Status = AcpiDsStoreObjectToLocal (RefDesc->Reference.Class,
 188             RefDesc->Reference.Value, SourceDesc, WalkState);
 189         break;
 190
 191     case ACPI_REFCLASS_DEBUG:
 192         /*
 193          * Storing to the Debug object causes the value stored to be
 194          * displayed and otherwise has no effect -- see ACPI Specification
 195          */
 196         ACPI_DEBUG_PRINT ((ACPI_DB_EXEC,
 197             "**** Write to Debug Object: Object %p [%s] ****:\n\n",
 198             SourceDesc, AcpiUtGetObjectTypeName (SourceDesc)));
 199
 200         ACPI_DEBUG_OBJECT (SourceDesc, 0, 0);
 201         break;
 202
 203     default:
 204
 205         ACPI_ERROR ((AE_INFO, "Unknown Reference Class 0x%2.2X",
 206             RefDesc->Reference.Class));
 207         ACPI_DUMP_ENTRY (RefDesc, ACPI_LV_INFO);
 208
 209         Status = AE_AML_INTERNAL;
 210         break;
 211     }
 212
 213     return_ACPI_STATUS (Status);
 214 }
 215
 216
 217 /*******************************************************************************
 218  *
 219  * FUNCTION:    AcpiExStoreObjectToIndex
 220  *
 221  * PARAMETERS:  *SourceDesc             - Value to be stored
 222  *              *DestDesc               - Named object to receive the value
 223  *              WalkState               - Current walk state
 224  *
 225  * RETURN:      Status
 226  *
 227  * DESCRIPTION: Store the object to indexed Buffer or Package element
 228  *
 229  ******************************************************************************/
 230
 231 static ACPI_STATUS
 232 AcpiExStoreObjectToIndex (
 233     ACPI_OPERAND_OBJECT     *SourceDesc,
 234     ACPI_OPERAND_OBJECT     *IndexDesc,
 235     ACPI_WALK_STATE         *WalkState)
 236 {
 237     ACPI_STATUS             Status = AE_OK;
 238     ACPI_OPERAND_OBJECT     *ObjDesc;
 239     ACPI_OPERAND_OBJECT     *NewDesc;
 240     UINT8                   Value = 0;
 241     UINT32                  i;
 242
 243
 244     ACPI_FUNCTION_TRACE (ExStoreObjectToIndex);
 245
 246
 247     /*
 248      * Destination must be a reference pointer, and
 249      * must point to either a buffer or a package
 250      */
 251     switch (IndexDesc->Reference.TargetType)
 252     {
 253     case ACPI_TYPE_PACKAGE:
 254         /*
 255          * Storing to a package element. Copy the object and replace
 256          * any existing object with the new object. No implicit
 257          * conversion is performed.
 258          *
 259          * The object at *(IndexDesc->Reference.Where) is the
 260          * element within the package that is to be modified.
 261          * The parent package object is at IndexDesc->Reference.Object
 262          */
 263         ObjDesc = *(IndexDesc->Reference.Where);
 264
 265         if (SourceDesc->Common.Type == ACPI_TYPE_LOCAL_REFERENCE &&
 266             SourceDesc->Reference.Class == ACPI_REFCLASS_TABLE)
 267         {
 268             /* This is a DDBHandle, just add a reference to it */
 269
 270             AcpiUtAddReference (SourceDesc);
 271             NewDesc = SourceDesc;
 272         }
 273         else
 274         {
 275             /* Normal object, copy it */
 276
 277             Status = AcpiUtCopyIobjectToIobject (
 278                 SourceDesc, &NewDesc, WalkState);
 279             if (ACPI_FAILURE (Status))
 280             {
 281                 return_ACPI_STATUS (Status);
 282             }
 283         }
 284
 285         if (ObjDesc)
 286         {
 287             /* Decrement reference count by the ref count of the parent package */
 288
 289             for (i = 0;
 290                  i < ((ACPI_OPERAND_OBJECT *)
 291                         IndexDesc->Reference.Object)->Common.ReferenceCount;
 292                  i++)
 293             {
 294                 AcpiUtRemoveReference (ObjDesc);
 295             }
 296         }
 297
 298         *(IndexDesc->Reference.Where) = NewDesc;
 299
 300         /* Increment ref count by the ref count of the parent package-1 */
 301
 302         for (i = 1;
 303              i < ((ACPI_OPERAND_OBJECT *)
 304                     IndexDesc->Reference.Object)->Common.ReferenceCount;
 305              i++)
 306         {
 307             AcpiUtAddReference (NewDesc);
 308         }
 309
 310         break;
 311
 312     case ACPI_TYPE_BUFFER_FIELD:
 313         /*
 314          * Store into a Buffer or String (not actually a real BufferField)
 315          * at a location defined by an Index.
 316          *
 317          * The first 8-bit element of the source object is written to the
 318          * 8-bit Buffer location defined by the Index destination object,
 319          * according to the ACPI 2.0 specification.
 320          */
 321
 322         /*
 323          * Make sure the target is a Buffer or String. An error should
 324          * not happen here, since the ReferenceObject was constructed
 325          * by the INDEX_OP code.
 326          */
 327         ObjDesc = IndexDesc->Reference.Object;
 328         if ((ObjDesc->Common.Type != ACPI_TYPE_BUFFER) &&
 329             (ObjDesc->Common.Type != ACPI_TYPE_STRING))
 330         {
 331             return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
 332         }
 333
 334         /*
 335          * The assignment of the individual elements will be slightly
 336          * different for each source type.
 337          */
 338         switch (SourceDesc->Common.Type)
 339         {
 340         case ACPI_TYPE_INTEGER:
 341
 342             /* Use the least-significant byte of the integer */
 343
 344             Value = (UINT8) (SourceDesc->Integer.Value);
 345             break;
 346
 347         case ACPI_TYPE_BUFFER:
 348         case ACPI_TYPE_STRING:
 349
 350             /* Note: Takes advantage of common string/buffer fields */
 351
 352             Value = SourceDesc->Buffer.Pointer[0];
 353             break;
 354
 355         default:
 356
 357             /* All other types are invalid */
 358
 359             ACPI_ERROR ((AE_INFO,
 360                 "Source must be type [Integer/Buffer/String], found [%s]",
 361                 AcpiUtGetObjectTypeName (SourceDesc)));
 362             return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
 363         }
 364
 365         /* Store the source value into the target buffer byte */
 366
 367         ObjDesc->Buffer.Pointer[IndexDesc->Reference.Value] = Value;
 368         break;
 369
 370     default:
 371         ACPI_ERROR ((AE_INFO,
 372             "Target is not of type [Package/BufferField]"));
 373         Status = AE_AML_TARGET_TYPE;
 374         break;
 375     }
 376
 377     return_ACPI_STATUS (Status);
 378 }
 379
 380
 381 /*******************************************************************************
 382  *
 383  * FUNCTION:    AcpiExStoreObjectToNode
 384  *
 385  * PARAMETERS:  SourceDesc              - Value to be stored
 386  *              Node                    - Named object to receive the value
 387  *              WalkState               - Current walk state
 388  *              ImplicitConversion      - Perform implicit conversion (yes/no)
 389  *
 390  * RETURN:      Status
 391  *
 392  * DESCRIPTION: Store the object to the named object.
 393  *
 394  * The assignment of an object to a named object is handled here.
 395  * The value passed in will replace the current value (if any)
 396  * with the input value.
 397  *
 398  * When storing into an object the data is converted to the
 399  * target object type then stored in the object. This means
 400  * that the target object type (for an initialized target) will
 401  * not be changed by a store operation. A CopyObject can change
 402  * the target type, however.
 403  *
 404  * The ImplicitConversion flag is set to NO/FALSE only when
 405  * storing to an ArgX -- as per the rules of the ACPI spec.
 406  *
 407  * Assumes parameters are already validated.
 408  *
 409  ******************************************************************************/
 410
 411 ACPI_STATUS
 412 AcpiExStoreObjectToNode (
 413     ACPI_OPERAND_OBJECT     *SourceDesc,
 414     ACPI_NAMESPACE_NODE     *Node,
 415     ACPI_WALK_STATE         *WalkState,
 416     UINT8                   ImplicitConversion)
 417 {
 418     ACPI_STATUS             Status = AE_OK;
 419     ACPI_OPERAND_OBJECT     *TargetDesc;
 420     ACPI_OPERAND_OBJECT     *NewDesc;
 421     ACPI_OBJECT_TYPE        TargetType;
 422
 423
 424     ACPI_FUNCTION_TRACE_PTR (ExStoreObjectToNode, SourceDesc);
 425
 426
 427     /* Get current type of the node, and object attached to Node */
 428
 429     TargetType = AcpiNsGetType (Node);
 430     TargetDesc = AcpiNsGetAttachedObject (Node);
 431
 432     ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "Storing %p [%s] to node %p [%s]\n",
 433         SourceDesc, AcpiUtGetObjectTypeName (SourceDesc),
 434         Node, AcpiUtGetTypeName (TargetType)));
 435
 436     /* Only limited target types possible for everything except CopyObject */
 437
 438     if (WalkState->Opcode != AML_COPY_OP)
 439     {
 440         /*
 441          * Only CopyObject allows all object types to be overwritten. For
 442          * TargetRef(s), there are restrictions on the object types that
 443          * are allowed.
 444          *
 445          * Allowable operations/typing for Store:
 446          *
 447          * 1) Simple Store
 448          *      Integer     --> Integer (Named/Local/Arg)
 449          *      String      --> String  (Named/Local/Arg)
 450          *      Buffer      --> Buffer  (Named/Local/Arg)
 451          *      Package     --> Package (Named/Local/Arg)
 452          *
 453          * 2) Store with implicit conversion
 454          *      Integer     --> String or Buffer  (Named)
 455          *      String      --> Integer or Buffer (Named)
 456          *      Buffer      --> Integer or String (Named)
 457          */
 458         switch (TargetType)
 459         {
 460         case ACPI_TYPE_PACKAGE:
 461             /*
 462              * Here, can only store a package to an existing package.
 463              * Storing a package to a Local/Arg is OK, and handled
 464              * elsewhere.
 465              */
 466             if (WalkState->Opcode == AML_STORE_OP)
 467             {
 468                 if (SourceDesc->Common.Type != ACPI_TYPE_PACKAGE)
 469                 {
 470                     ACPI_ERROR ((AE_INFO,
 471                         "Cannot assign type [%s] to [Package] "
 472                         "(source must be type Pkg)",
 473                         AcpiUtGetObjectTypeName (SourceDesc)));
 474
 475                     return_ACPI_STATUS (AE_AML_TARGET_TYPE);
 476                 }
 477                 break;
 478             }
 479
 480         /* Fallthrough */
 481
 482         case ACPI_TYPE_DEVICE:
 483         case ACPI_TYPE_EVENT:
 484         case ACPI_TYPE_MUTEX:
 485         case ACPI_TYPE_REGION:
 486         case ACPI_TYPE_POWER:
 487         case ACPI_TYPE_PROCESSOR:
 488         case ACPI_TYPE_THERMAL:
 489
 490             ACPI_ERROR ((AE_INFO,
 491                 "Target must be [Buffer/Integer/String/Reference]"
 492                 ", found [%s] (%4.4s)",
 493                 AcpiUtGetTypeName (Node->Type), Node->Name.Ascii));
 494
 495             return_ACPI_STATUS (AE_AML_TARGET_TYPE);
 496
 497         default:
 498             break;
 499         }
 500     }
 501
 502     /*
 503      * Resolve the source object to an actual value
 504      * (If it is a reference object)
 505      */
 506     Status = AcpiExResolveObject (&SourceDesc, TargetType, WalkState);
 507     if (ACPI_FAILURE (Status))
 508     {
 509         return_ACPI_STATUS (Status);
 510     }
 511
 512     /* Do the actual store operation */
 513
 514     switch (TargetType)
 515     {
 516         /*
 517          * The simple data types all support implicit source operand
 518          * conversion before the store.
 519          */
 520     case ACPI_TYPE_INTEGER:
 521     case ACPI_TYPE_STRING:
 522     case ACPI_TYPE_BUFFER:
 523
 524         if ((WalkState->Opcode == AML_COPY_OP) ||
 525             !ImplicitConversion)
 526         {
 527             /*
 528              * However, CopyObject and Stores to ArgX do not perform
 529              * an implicit conversion, as per the ACPI specification.
 530              * A direct store is performed instead.
 531              */
 532             Status = AcpiExStoreDirectToNode (SourceDesc, Node, WalkState);
 533             break;
 534         }
 535
 536         /* Store with implicit source operand conversion support */
 537
 538         Status = AcpiExStoreObjectToObject (SourceDesc, TargetDesc,
 539             &NewDesc, WalkState);
 540         if (ACPI_FAILURE (Status))
 541         {
 542             return_ACPI_STATUS (Status);
 543         }
 544
 545         if (NewDesc != TargetDesc)
 546         {
 547             /*
 548              * Store the new NewDesc as the new value of the Name, and set
 549              * the Name's type to that of the value being stored in it.
 550              * SourceDesc reference count is incremented by AttachObject.
 551              *
 552              * Note: This may change the type of the node if an explicit
 553              * store has been performed such that the node/object type
 554              * has been changed.
 555              */
 556             Status = AcpiNsAttachObject (
 557                 Node, NewDesc, NewDesc->Common.Type);
 558
 559             ACPI_DEBUG_PRINT ((ACPI_DB_EXEC,
 560                 "Store type [%s] into [%s] via Convert/Attach\n",
 561                 AcpiUtGetObjectTypeName (SourceDesc),
 562                 AcpiUtGetObjectTypeName (NewDesc)));
 563         }
 564         break;
 565
 566     case ACPI_TYPE_BUFFER_FIELD:
 567     case ACPI_TYPE_LOCAL_REGION_FIELD:
 568     case ACPI_TYPE_LOCAL_BANK_FIELD:
 569     case ACPI_TYPE_LOCAL_INDEX_FIELD:
 570         /*
 571          * For all fields, always write the source data to the target
 572          * field. Any required implicit source operand conversion is
 573          * performed in the function below as necessary. Note, field
 574          * objects must retain their original type permanently.
 575          */
 576         Status = AcpiExWriteDataToField (SourceDesc, TargetDesc,
 577             &WalkState->ResultObj);
 578         break;
 579
 580     default:
 581         /*
 582          * CopyObject operator: No conversions for all other types.
 583          * Instead, directly store a copy of the source object.
 584          *
 585          * This is the ACPI spec-defined behavior for the CopyObject
 586          * operator. (Note, for this default case, all normal
 587          * Store/Target operations exited above with an error).
 588          */
 589         Status = AcpiExStoreDirectToNode (SourceDesc, Node, WalkState);
 590         break;
 591     }
 592
 593     return_ACPI_STATUS (Status);
 594 }
 595
 596
 597 /*******************************************************************************
 598  *
 599  * FUNCTION:    AcpiExStoreDirectToNode
 600  *
 601  * PARAMETERS:  SourceDesc              - Value to be stored
 602  *              Node                    - Named object to receive the value
 603  *              WalkState               - Current walk state
 604  *
 605  * RETURN:      Status
 606  *
 607  * DESCRIPTION: "Store" an object directly to a node. This involves a copy
 608  *              and an attach.
 609  *
 610  ******************************************************************************/
 611
 612 static ACPI_STATUS
 613 AcpiExStoreDirectToNode (
 614     ACPI_OPERAND_OBJECT     *SourceDesc,
 615     ACPI_NAMESPACE_NODE     *Node,
 616     ACPI_WALK_STATE         *WalkState)
 617 {
 618     ACPI_STATUS             Status;
 619     ACPI_OPERAND_OBJECT     *NewDesc;
 620
 621
 622     ACPI_FUNCTION_TRACE (ExStoreDirectToNode);
 623
 624
 625     ACPI_DEBUG_PRINT ((ACPI_DB_EXEC,
 626         "Storing [%s] (%p) directly into node [%s] (%p)"
 627         " with no implicit conversion\n",
 628         AcpiUtGetObjectTypeName (SourceDesc), SourceDesc,
 629         AcpiUtGetTypeName (Node->Type), Node));
 630
 631     /* Copy the source object to a new object */
 632
 633     Status = AcpiUtCopyIobjectToIobject (SourceDesc, &NewDesc, WalkState);
 634     if (ACPI_FAILURE (Status))
 635     {
 636         return_ACPI_STATUS (Status);
 637     }
 638
 639     /* Attach the new object to the node */
 640
 641     Status = AcpiNsAttachObject (Node, NewDesc, NewDesc->Common.Type);
 642     AcpiUtRemoveReference (NewDesc);
 643     return_ACPI_STATUS (Status);
 644 }