4 * The contents of this file are subject to the terms of the
5 * Common Development and Distribution License (the "License").
6 * You may not use this file except in compliance with the License.
8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9 * or http://www.opensolaris.org/os/licensing.
10 * See the License for the specific language governing permissions
11 * and limitations under the License.
13 * When distributing Covered Code, include this CDDL HEADER in each
14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15 * If applicable, add the following below this CDDL HEADER, with the
16 * fields enclosed by brackets "[]" replaced with your own identifying
17 * information: Portions Copyright [yyyy] [name of copyright owner]
22 * Copyright (c) 2008, 2010, Oracle and/or its affiliates. All rights reserved.
23 * Copyright 2016 Gary Mills
24 * Copyright (c) 2011, 2016 by Delphix. All rights reserved.
25 * Copyright 2017 Joyent, Inc.
28 #include <sys/dsl_scan.h>
29 #include <sys/dsl_pool.h>
30 #include <sys/dsl_dataset.h>
31 #include <sys/dsl_prop.h>
32 #include <sys/dsl_dir.h>
33 #include <sys/dsl_synctask.h>
34 #include <sys/dnode.h>
35 #include <sys/dmu_tx.h>
36 #include <sys/dmu_objset.h>
40 #include <sys/zfs_context.h>
41 #include <sys/fs/zfs.h>
42 #include <sys/zfs_znode.h>
43 #include <sys/spa_impl.h>
44 #include <sys/vdev_impl.h>
45 #include <sys/zil_impl.h>
46 #include <sys/zio_checksum.h>
49 #include <sys/sa_impl.h>
50 #include <sys/zfeature.h>
53 #include <sys/zfs_vfsops.h>
56 typedef int (scan_cb_t
)(dsl_pool_t
*, const blkptr_t
*,
57 const zbookmark_phys_t
*);
59 static scan_cb_t dsl_scan_scrub_cb
;
60 static void dsl_scan_cancel_sync(void *, dmu_tx_t
*);
61 static void dsl_scan_sync_state(dsl_scan_t
*, dmu_tx_t
*);
62 static boolean_t
dsl_scan_restarting(dsl_scan_t
*, dmu_tx_t
*);
64 int zfs_top_maxinflight
= 32; /* maximum I/Os per top-level */
65 int zfs_resilver_delay
= 2; /* number of ticks to delay resilver */
66 int zfs_scrub_delay
= 4; /* number of ticks to delay scrub */
67 int zfs_scan_idle
= 50; /* idle window in clock ticks */
69 int zfs_scan_min_time_ms
= 1000; /* min millisecs to scrub per txg */
70 int zfs_free_min_time_ms
= 1000; /* min millisecs to free per txg */
71 int zfs_resilver_min_time_ms
= 3000; /* min millisecs to resilver per txg */
72 boolean_t zfs_no_scrub_io
= B_FALSE
; /* set to disable scrub i/o */
73 boolean_t zfs_no_scrub_prefetch
= B_FALSE
; /* set to disable scrub prefetch */
74 enum ddt_class zfs_scrub_ddt_class_max
= DDT_CLASS_DUPLICATE
;
75 int dsl_scan_delay_completion
= B_FALSE
; /* set to delay scan completion */
76 /* max number of blocks to free in a single TXG */
77 uint64_t zfs_free_max_blocks
= UINT64_MAX
;
79 #define DSL_SCAN_IS_SCRUB_RESILVER(scn) \
80 ((scn)->scn_phys.scn_func == POOL_SCAN_SCRUB || \
81 (scn)->scn_phys.scn_func == POOL_SCAN_RESILVER)
83 extern int zfs_txg_timeout
;
86 * Enable/disable the processing of the free_bpobj object.
88 boolean_t zfs_free_bpobj_enabled
= B_TRUE
;
90 /* the order has to match pool_scan_type */
91 static scan_cb_t
*scan_funcs
[POOL_SCAN_FUNCS
] = {
93 dsl_scan_scrub_cb
, /* POOL_SCAN_SCRUB */
94 dsl_scan_scrub_cb
, /* POOL_SCAN_RESILVER */
98 dsl_scan_init(dsl_pool_t
*dp
, uint64_t txg
)
102 spa_t
*spa
= dp
->dp_spa
;
105 scn
= dp
->dp_scan
= kmem_zalloc(sizeof (dsl_scan_t
), KM_SLEEP
);
109 * It's possible that we're resuming a scan after a reboot so
110 * make sure that the scan_async_destroying flag is initialized
113 ASSERT(!scn
->scn_async_destroying
);
114 scn
->scn_async_destroying
= spa_feature_is_active(dp
->dp_spa
,
115 SPA_FEATURE_ASYNC_DESTROY
);
117 err
= zap_lookup(dp
->dp_meta_objset
, DMU_POOL_DIRECTORY_OBJECT
,
118 "scrub_func", sizeof (uint64_t), 1, &f
);
121 * There was an old-style scrub in progress. Restart a
122 * new-style scrub from the beginning.
124 scn
->scn_restart_txg
= txg
;
125 zfs_dbgmsg("old-style scrub was in progress; "
126 "restarting new-style scrub in txg %llu",
127 scn
->scn_restart_txg
);
130 * Load the queue obj from the old location so that it
131 * can be freed by dsl_scan_done().
133 (void) zap_lookup(dp
->dp_meta_objset
, DMU_POOL_DIRECTORY_OBJECT
,
134 "scrub_queue", sizeof (uint64_t), 1,
135 &scn
->scn_phys
.scn_queue_obj
);
137 err
= zap_lookup(dp
->dp_meta_objset
, DMU_POOL_DIRECTORY_OBJECT
,
138 DMU_POOL_SCAN
, sizeof (uint64_t), SCAN_PHYS_NUMINTS
,
145 if (scn
->scn_phys
.scn_state
== DSS_SCANNING
&&
146 spa_prev_software_version(dp
->dp_spa
) < SPA_VERSION_SCAN
) {
148 * A new-type scrub was in progress on an old
149 * pool, and the pool was accessed by old
150 * software. Restart from the beginning, since
151 * the old software may have changed the pool in
154 scn
->scn_restart_txg
= txg
;
155 zfs_dbgmsg("new-style scrub was modified "
156 "by old software; restarting in txg %llu",
157 scn
->scn_restart_txg
);
161 spa_scan_stat_init(spa
);
166 dsl_scan_fini(dsl_pool_t
*dp
)
169 kmem_free(dp
->dp_scan
, sizeof (dsl_scan_t
));
176 dsl_scan_setup_check(void *arg
, dmu_tx_t
*tx
)
178 dsl_scan_t
*scn
= dmu_tx_pool(tx
)->dp_scan
;
180 if (scn
->scn_phys
.scn_state
== DSS_SCANNING
)
181 return (SET_ERROR(EBUSY
));
187 dsl_scan_setup_sync(void *arg
, dmu_tx_t
*tx
)
189 dsl_scan_t
*scn
= dmu_tx_pool(tx
)->dp_scan
;
190 pool_scan_func_t
*funcp
= arg
;
191 dmu_object_type_t ot
= 0;
192 dsl_pool_t
*dp
= scn
->scn_dp
;
193 spa_t
*spa
= dp
->dp_spa
;
195 ASSERT(scn
->scn_phys
.scn_state
!= DSS_SCANNING
);
196 ASSERT(*funcp
> POOL_SCAN_NONE
&& *funcp
< POOL_SCAN_FUNCS
);
197 bzero(&scn
->scn_phys
, sizeof (scn
->scn_phys
));
198 scn
->scn_phys
.scn_func
= *funcp
;
199 scn
->scn_phys
.scn_state
= DSS_SCANNING
;
200 scn
->scn_phys
.scn_min_txg
= 0;
201 scn
->scn_phys
.scn_max_txg
= tx
->tx_txg
;
202 scn
->scn_phys
.scn_ddt_class_max
= DDT_CLASSES
- 1; /* the entire DDT */
203 scn
->scn_phys
.scn_start_time
= gethrestime_sec();
204 scn
->scn_phys
.scn_errors
= 0;
205 scn
->scn_phys
.scn_to_examine
= spa
->spa_root_vdev
->vdev_stat
.vs_alloc
;
206 scn
->scn_restart_txg
= 0;
207 scn
->scn_done_txg
= 0;
208 spa_scan_stat_init(spa
);
210 if (DSL_SCAN_IS_SCRUB_RESILVER(scn
)) {
211 scn
->scn_phys
.scn_ddt_class_max
= zfs_scrub_ddt_class_max
;
213 /* rewrite all disk labels */
214 vdev_config_dirty(spa
->spa_root_vdev
);
216 if (vdev_resilver_needed(spa
->spa_root_vdev
,
217 &scn
->scn_phys
.scn_min_txg
, &scn
->scn_phys
.scn_max_txg
)) {
218 spa_event_notify(spa
, NULL
, NULL
,
219 ESC_ZFS_RESILVER_START
);
221 spa_event_notify(spa
, NULL
, NULL
, ESC_ZFS_SCRUB_START
);
224 spa
->spa_scrub_started
= B_TRUE
;
226 * If this is an incremental scrub, limit the DDT scrub phase
227 * to just the auto-ditto class (for correctness); the rest
228 * of the scrub should go faster using top-down pruning.
230 if (scn
->scn_phys
.scn_min_txg
> TXG_INITIAL
)
231 scn
->scn_phys
.scn_ddt_class_max
= DDT_CLASS_DITTO
;
235 /* back to the generic stuff */
237 if (dp
->dp_blkstats
== NULL
) {
239 kmem_alloc(sizeof (zfs_all_blkstats_t
), KM_SLEEP
);
241 bzero(dp
->dp_blkstats
, sizeof (zfs_all_blkstats_t
));
243 if (spa_version(spa
) < SPA_VERSION_DSL_SCRUB
)
244 ot
= DMU_OT_ZAP_OTHER
;
246 scn
->scn_phys
.scn_queue_obj
= zap_create(dp
->dp_meta_objset
,
247 ot
? ot
: DMU_OT_SCAN_QUEUE
, DMU_OT_NONE
, 0, tx
);
249 dsl_scan_sync_state(scn
, tx
);
251 spa_history_log_internal(spa
, "scan setup", tx
,
252 "func=%u mintxg=%llu maxtxg=%llu",
253 *funcp
, scn
->scn_phys
.scn_min_txg
, scn
->scn_phys
.scn_max_txg
);
258 dsl_scan_done(dsl_scan_t
*scn
, boolean_t complete
, dmu_tx_t
*tx
)
260 static const char *old_names
[] = {
262 "scrub_ddt_bookmark",
263 "scrub_ddt_class_max",
272 dsl_pool_t
*dp
= scn
->scn_dp
;
273 spa_t
*spa
= dp
->dp_spa
;
276 /* Remove any remnants of an old-style scrub. */
277 for (i
= 0; old_names
[i
]; i
++) {
278 (void) zap_remove(dp
->dp_meta_objset
,
279 DMU_POOL_DIRECTORY_OBJECT
, old_names
[i
], tx
);
282 if (scn
->scn_phys
.scn_queue_obj
!= 0) {
283 VERIFY(0 == dmu_object_free(dp
->dp_meta_objset
,
284 scn
->scn_phys
.scn_queue_obj
, tx
));
285 scn
->scn_phys
.scn_queue_obj
= 0;
289 * If we were "restarted" from a stopped state, don't bother
290 * with anything else.
292 if (scn
->scn_phys
.scn_state
!= DSS_SCANNING
)
296 scn
->scn_phys
.scn_state
= DSS_FINISHED
;
298 scn
->scn_phys
.scn_state
= DSS_CANCELED
;
300 if (dsl_scan_restarting(scn
, tx
))
301 spa_history_log_internal(spa
, "scan aborted, restarting", tx
,
302 "errors=%llu", spa_get_errlog_size(spa
));
304 spa_history_log_internal(spa
, "scan cancelled", tx
,
305 "errors=%llu", spa_get_errlog_size(spa
));
307 spa_history_log_internal(spa
, "scan done", tx
,
308 "errors=%llu", spa_get_errlog_size(spa
));
310 if (DSL_SCAN_IS_SCRUB_RESILVER(scn
)) {
311 mutex_enter(&spa
->spa_scrub_lock
);
312 while (spa
->spa_scrub_inflight
> 0) {
313 cv_wait(&spa
->spa_scrub_io_cv
,
314 &spa
->spa_scrub_lock
);
316 mutex_exit(&spa
->spa_scrub_lock
);
317 spa
->spa_scrub_started
= B_FALSE
;
318 spa
->spa_scrub_active
= B_FALSE
;
321 * If the scrub/resilver completed, update all DTLs to
322 * reflect this. Whether it succeeded or not, vacate
323 * all temporary scrub DTLs.
325 vdev_dtl_reassess(spa
->spa_root_vdev
, tx
->tx_txg
,
326 complete
? scn
->scn_phys
.scn_max_txg
: 0, B_TRUE
);
328 spa_event_notify(spa
, NULL
, NULL
,
329 scn
->scn_phys
.scn_min_txg
?
330 ESC_ZFS_RESILVER_FINISH
: ESC_ZFS_SCRUB_FINISH
);
332 spa_errlog_rotate(spa
);
335 * We may have finished replacing a device.
336 * Let the async thread assess this and handle the detach.
338 spa_async_request(spa
, SPA_ASYNC_RESILVER_DONE
);
341 scn
->scn_phys
.scn_end_time
= gethrestime_sec();
346 dsl_scan_cancel_check(void *arg
, dmu_tx_t
*tx
)
348 dsl_scan_t
*scn
= dmu_tx_pool(tx
)->dp_scan
;
350 if (scn
->scn_phys
.scn_state
!= DSS_SCANNING
)
351 return (SET_ERROR(ENOENT
));
357 dsl_scan_cancel_sync(void *arg
, dmu_tx_t
*tx
)
359 dsl_scan_t
*scn
= dmu_tx_pool(tx
)->dp_scan
;
361 dsl_scan_done(scn
, B_FALSE
, tx
);
362 dsl_scan_sync_state(scn
, tx
);
366 dsl_scan_cancel(dsl_pool_t
*dp
)
368 return (dsl_sync_task(spa_name(dp
->dp_spa
), dsl_scan_cancel_check
,
369 dsl_scan_cancel_sync
, NULL
, 3, ZFS_SPACE_CHECK_RESERVED
));
372 static void dsl_scan_visitbp(blkptr_t
*bp
, const zbookmark_phys_t
*zb
,
373 dnode_phys_t
*dnp
, dsl_dataset_t
*ds
, dsl_scan_t
*scn
,
374 dmu_objset_type_t ostype
, dmu_tx_t
*tx
);
375 static void dsl_scan_visitdnode(dsl_scan_t
*, dsl_dataset_t
*ds
,
376 dmu_objset_type_t ostype
,
377 dnode_phys_t
*dnp
, uint64_t object
, dmu_tx_t
*tx
);
380 dsl_free(dsl_pool_t
*dp
, uint64_t txg
, const blkptr_t
*bp
)
382 zio_free(dp
->dp_spa
, txg
, bp
);
386 dsl_free_sync(zio_t
*pio
, dsl_pool_t
*dp
, uint64_t txg
, const blkptr_t
*bpp
)
388 ASSERT(dsl_pool_sync_context(dp
));
389 zio_nowait(zio_free_sync(pio
, dp
->dp_spa
, txg
, bpp
, pio
->io_flags
));
393 dsl_scan_ds_maxtxg(dsl_dataset_t
*ds
)
395 uint64_t smt
= ds
->ds_dir
->dd_pool
->dp_scan
->scn_phys
.scn_max_txg
;
396 if (ds
->ds_is_snapshot
)
397 return (MIN(smt
, dsl_dataset_phys(ds
)->ds_creation_txg
));
402 dsl_scan_sync_state(dsl_scan_t
*scn
, dmu_tx_t
*tx
)
404 VERIFY0(zap_update(scn
->scn_dp
->dp_meta_objset
,
405 DMU_POOL_DIRECTORY_OBJECT
,
406 DMU_POOL_SCAN
, sizeof (uint64_t), SCAN_PHYS_NUMINTS
,
407 &scn
->scn_phys
, tx
));
410 extern int zfs_vdev_async_write_active_min_dirty_percent
;
413 dsl_scan_check_pause(dsl_scan_t
*scn
, const zbookmark_phys_t
*zb
)
415 /* we never skip user/group accounting objects */
416 if (zb
&& (int64_t)zb
->zb_object
< 0)
419 if (scn
->scn_pausing
)
420 return (B_TRUE
); /* we're already pausing */
422 if (!ZB_IS_ZERO(&scn
->scn_phys
.scn_bookmark
))
423 return (B_FALSE
); /* we're resuming */
425 /* We only know how to resume from level-0 blocks. */
426 if (zb
&& zb
->zb_level
!= 0)
431 * - we have scanned for the maximum time: an entire txg
432 * timeout (default 5 sec)
434 * - we have scanned for at least the minimum time (default 1 sec
435 * for scrub, 3 sec for resilver), and either we have sufficient
436 * dirty data that we are starting to write more quickly
437 * (default 30%), or someone is explicitly waiting for this txg
440 * - the spa is shutting down because this pool is being exported
441 * or the machine is rebooting.
443 int mintime
= (scn
->scn_phys
.scn_func
== POOL_SCAN_RESILVER
) ?
444 zfs_resilver_min_time_ms
: zfs_scan_min_time_ms
;
445 uint64_t elapsed_nanosecs
= gethrtime() - scn
->scn_sync_start_time
;
446 int dirty_pct
= scn
->scn_dp
->dp_dirty_total
* 100 / zfs_dirty_data_max
;
447 if (elapsed_nanosecs
/ NANOSEC
>= zfs_txg_timeout
||
448 (NSEC2MSEC(elapsed_nanosecs
) > mintime
&&
449 (txg_sync_waiting(scn
->scn_dp
) ||
450 dirty_pct
>= zfs_vdev_async_write_active_min_dirty_percent
)) ||
451 spa_shutting_down(scn
->scn_dp
->dp_spa
)) {
453 dprintf("pausing at bookmark %llx/%llx/%llx/%llx\n",
454 (longlong_t
)zb
->zb_objset
,
455 (longlong_t
)zb
->zb_object
,
456 (longlong_t
)zb
->zb_level
,
457 (longlong_t
)zb
->zb_blkid
);
458 scn
->scn_phys
.scn_bookmark
= *zb
;
460 dprintf("pausing at DDT bookmark %llx/%llx/%llx/%llx\n",
461 (longlong_t
)scn
->scn_phys
.scn_ddt_bookmark
.ddb_class
,
462 (longlong_t
)scn
->scn_phys
.scn_ddt_bookmark
.ddb_type
,
463 (longlong_t
)scn
->scn_phys
.scn_ddt_bookmark
.ddb_checksum
,
464 (longlong_t
)scn
->scn_phys
.scn_ddt_bookmark
.ddb_cursor
);
465 scn
->scn_pausing
= B_TRUE
;
471 typedef struct zil_scan_arg
{
473 zil_header_t
*zsa_zh
;
478 dsl_scan_zil_block(zilog_t
*zilog
, blkptr_t
*bp
, void *arg
, uint64_t claim_txg
)
480 zil_scan_arg_t
*zsa
= arg
;
481 dsl_pool_t
*dp
= zsa
->zsa_dp
;
482 dsl_scan_t
*scn
= dp
->dp_scan
;
483 zil_header_t
*zh
= zsa
->zsa_zh
;
486 if (BP_IS_HOLE(bp
) || bp
->blk_birth
<= scn
->scn_phys
.scn_cur_min_txg
)
490 * One block ("stubby") can be allocated a long time ago; we
491 * want to visit that one because it has been allocated
492 * (on-disk) even if it hasn't been claimed (even though for
493 * scrub there's nothing to do to it).
495 if (claim_txg
== 0 && bp
->blk_birth
>= spa_first_txg(dp
->dp_spa
))
498 SET_BOOKMARK(&zb
, zh
->zh_log
.blk_cksum
.zc_word
[ZIL_ZC_OBJSET
],
499 ZB_ZIL_OBJECT
, ZB_ZIL_LEVEL
, bp
->blk_cksum
.zc_word
[ZIL_ZC_SEQ
]);
501 VERIFY(0 == scan_funcs
[scn
->scn_phys
.scn_func
](dp
, bp
, &zb
));
507 dsl_scan_zil_record(zilog_t
*zilog
, lr_t
*lrc
, void *arg
, uint64_t claim_txg
)
509 if (lrc
->lrc_txtype
== TX_WRITE
) {
510 zil_scan_arg_t
*zsa
= arg
;
511 dsl_pool_t
*dp
= zsa
->zsa_dp
;
512 dsl_scan_t
*scn
= dp
->dp_scan
;
513 zil_header_t
*zh
= zsa
->zsa_zh
;
514 lr_write_t
*lr
= (lr_write_t
*)lrc
;
515 blkptr_t
*bp
= &lr
->lr_blkptr
;
518 if (BP_IS_HOLE(bp
) ||
519 bp
->blk_birth
<= scn
->scn_phys
.scn_cur_min_txg
)
523 * birth can be < claim_txg if this record's txg is
524 * already txg sync'ed (but this log block contains
525 * other records that are not synced)
527 if (claim_txg
== 0 || bp
->blk_birth
< claim_txg
)
530 SET_BOOKMARK(&zb
, zh
->zh_log
.blk_cksum
.zc_word
[ZIL_ZC_OBJSET
],
531 lr
->lr_foid
, ZB_ZIL_LEVEL
,
532 lr
->lr_offset
/ BP_GET_LSIZE(bp
));
534 VERIFY(0 == scan_funcs
[scn
->scn_phys
.scn_func
](dp
, bp
, &zb
));
540 dsl_scan_zil(dsl_pool_t
*dp
, zil_header_t
*zh
)
542 uint64_t claim_txg
= zh
->zh_claim_txg
;
543 zil_scan_arg_t zsa
= { dp
, zh
};
547 * We only want to visit blocks that have been claimed but not yet
548 * replayed (or, in read-only mode, blocks that *would* be claimed).
550 if (claim_txg
== 0 && spa_writeable(dp
->dp_spa
))
553 zilog
= zil_alloc(dp
->dp_meta_objset
, zh
);
555 (void) zil_parse(zilog
, dsl_scan_zil_block
, dsl_scan_zil_record
, &zsa
,
563 dsl_scan_prefetch(dsl_scan_t
*scn
, arc_buf_t
*buf
, blkptr_t
*bp
,
564 uint64_t objset
, uint64_t object
, uint64_t blkid
)
566 zbookmark_phys_t czb
;
567 arc_flags_t flags
= ARC_FLAG_NOWAIT
| ARC_FLAG_PREFETCH
;
569 if (zfs_no_scrub_prefetch
)
572 if (BP_IS_HOLE(bp
) || bp
->blk_birth
<= scn
->scn_phys
.scn_min_txg
||
573 (BP_GET_LEVEL(bp
) == 0 && BP_GET_TYPE(bp
) != DMU_OT_DNODE
))
576 SET_BOOKMARK(&czb
, objset
, object
, BP_GET_LEVEL(bp
), blkid
);
578 (void) arc_read(scn
->scn_zio_root
, scn
->scn_dp
->dp_spa
, bp
,
579 NULL
, NULL
, ZIO_PRIORITY_ASYNC_READ
,
580 ZIO_FLAG_CANFAIL
| ZIO_FLAG_SCAN_THREAD
, &flags
, &czb
);
584 dsl_scan_check_resume(dsl_scan_t
*scn
, const dnode_phys_t
*dnp
,
585 const zbookmark_phys_t
*zb
)
588 * We never skip over user/group accounting objects (obj<0)
590 if (!ZB_IS_ZERO(&scn
->scn_phys
.scn_bookmark
) &&
591 (int64_t)zb
->zb_object
>= 0) {
593 * If we already visited this bp & everything below (in
594 * a prior txg sync), don't bother doing it again.
596 if (zbookmark_subtree_completed(dnp
, zb
,
597 &scn
->scn_phys
.scn_bookmark
))
601 * If we found the block we're trying to resume from, or
602 * we went past it to a different object, zero it out to
603 * indicate that it's OK to start checking for pausing
606 if (bcmp(zb
, &scn
->scn_phys
.scn_bookmark
, sizeof (*zb
)) == 0 ||
607 zb
->zb_object
> scn
->scn_phys
.scn_bookmark
.zb_object
) {
608 dprintf("resuming at %llx/%llx/%llx/%llx\n",
609 (longlong_t
)zb
->zb_objset
,
610 (longlong_t
)zb
->zb_object
,
611 (longlong_t
)zb
->zb_level
,
612 (longlong_t
)zb
->zb_blkid
);
613 bzero(&scn
->scn_phys
.scn_bookmark
, sizeof (*zb
));
620 * Return nonzero on i/o error.
621 * Return new buf to write out in *bufp.
624 dsl_scan_recurse(dsl_scan_t
*scn
, dsl_dataset_t
*ds
, dmu_objset_type_t ostype
,
625 dnode_phys_t
*dnp
, const blkptr_t
*bp
,
626 const zbookmark_phys_t
*zb
, dmu_tx_t
*tx
)
628 dsl_pool_t
*dp
= scn
->scn_dp
;
629 int zio_flags
= ZIO_FLAG_CANFAIL
| ZIO_FLAG_SCAN_THREAD
;
632 if (BP_GET_LEVEL(bp
) > 0) {
633 arc_flags_t flags
= ARC_FLAG_WAIT
;
636 int epb
= BP_GET_LSIZE(bp
) >> SPA_BLKPTRSHIFT
;
639 err
= arc_read(NULL
, dp
->dp_spa
, bp
, arc_getbuf_func
, &buf
,
640 ZIO_PRIORITY_ASYNC_READ
, zio_flags
, &flags
, zb
);
642 scn
->scn_phys
.scn_errors
++;
645 for (i
= 0, cbp
= buf
->b_data
; i
< epb
; i
++, cbp
++) {
646 dsl_scan_prefetch(scn
, buf
, cbp
, zb
->zb_objset
,
647 zb
->zb_object
, zb
->zb_blkid
* epb
+ i
);
649 for (i
= 0, cbp
= buf
->b_data
; i
< epb
; i
++, cbp
++) {
650 zbookmark_phys_t czb
;
652 SET_BOOKMARK(&czb
, zb
->zb_objset
, zb
->zb_object
,
654 zb
->zb_blkid
* epb
+ i
);
655 dsl_scan_visitbp(cbp
, &czb
, dnp
,
656 ds
, scn
, ostype
, tx
);
658 arc_buf_destroy(buf
, &buf
);
659 } else if (BP_GET_TYPE(bp
) == DMU_OT_DNODE
) {
660 arc_flags_t flags
= ARC_FLAG_WAIT
;
663 int epb
= BP_GET_LSIZE(bp
) >> DNODE_SHIFT
;
666 err
= arc_read(NULL
, dp
->dp_spa
, bp
, arc_getbuf_func
, &buf
,
667 ZIO_PRIORITY_ASYNC_READ
, zio_flags
, &flags
, zb
);
669 scn
->scn_phys
.scn_errors
++;
672 for (i
= 0, cdnp
= buf
->b_data
; i
< epb
; i
++, cdnp
++) {
673 for (j
= 0; j
< cdnp
->dn_nblkptr
; j
++) {
674 blkptr_t
*cbp
= &cdnp
->dn_blkptr
[j
];
675 dsl_scan_prefetch(scn
, buf
, cbp
,
676 zb
->zb_objset
, zb
->zb_blkid
* epb
+ i
, j
);
679 for (i
= 0, cdnp
= buf
->b_data
; i
< epb
; i
++, cdnp
++) {
680 dsl_scan_visitdnode(scn
, ds
, ostype
,
681 cdnp
, zb
->zb_blkid
* epb
+ i
, tx
);
684 arc_buf_destroy(buf
, &buf
);
685 } else if (BP_GET_TYPE(bp
) == DMU_OT_OBJSET
) {
686 arc_flags_t flags
= ARC_FLAG_WAIT
;
690 err
= arc_read(NULL
, dp
->dp_spa
, bp
, arc_getbuf_func
, &buf
,
691 ZIO_PRIORITY_ASYNC_READ
, zio_flags
, &flags
, zb
);
693 scn
->scn_phys
.scn_errors
++;
699 dsl_scan_visitdnode(scn
, ds
, osp
->os_type
,
700 &osp
->os_meta_dnode
, DMU_META_DNODE_OBJECT
, tx
);
702 if (OBJSET_BUF_HAS_USERUSED(buf
)) {
704 * We also always visit user/group accounting
705 * objects, and never skip them, even if we are
706 * pausing. This is necessary so that the space
707 * deltas from this txg get integrated.
709 dsl_scan_visitdnode(scn
, ds
, osp
->os_type
,
710 &osp
->os_groupused_dnode
,
711 DMU_GROUPUSED_OBJECT
, tx
);
712 dsl_scan_visitdnode(scn
, ds
, osp
->os_type
,
713 &osp
->os_userused_dnode
,
714 DMU_USERUSED_OBJECT
, tx
);
716 arc_buf_destroy(buf
, &buf
);
723 dsl_scan_visitdnode(dsl_scan_t
*scn
, dsl_dataset_t
*ds
,
724 dmu_objset_type_t ostype
, dnode_phys_t
*dnp
,
725 uint64_t object
, dmu_tx_t
*tx
)
729 for (j
= 0; j
< dnp
->dn_nblkptr
; j
++) {
730 zbookmark_phys_t czb
;
732 SET_BOOKMARK(&czb
, ds
? ds
->ds_object
: 0, object
,
733 dnp
->dn_nlevels
- 1, j
);
734 dsl_scan_visitbp(&dnp
->dn_blkptr
[j
],
735 &czb
, dnp
, ds
, scn
, ostype
, tx
);
738 if (dnp
->dn_flags
& DNODE_FLAG_SPILL_BLKPTR
) {
739 zbookmark_phys_t czb
;
740 SET_BOOKMARK(&czb
, ds
? ds
->ds_object
: 0, object
,
742 dsl_scan_visitbp(&dnp
->dn_spill
,
743 &czb
, dnp
, ds
, scn
, ostype
, tx
);
748 * The arguments are in this order because mdb can only print the
749 * first 5; we want them to be useful.
752 dsl_scan_visitbp(blkptr_t
*bp
, const zbookmark_phys_t
*zb
,
753 dnode_phys_t
*dnp
, dsl_dataset_t
*ds
, dsl_scan_t
*scn
,
754 dmu_objset_type_t ostype
, dmu_tx_t
*tx
)
756 dsl_pool_t
*dp
= scn
->scn_dp
;
757 arc_buf_t
*buf
= NULL
;
758 blkptr_t bp_toread
= *bp
;
760 /* ASSERT(pbuf == NULL || arc_released(pbuf)); */
762 if (dsl_scan_check_pause(scn
, zb
))
765 if (dsl_scan_check_resume(scn
, dnp
, zb
))
771 scn
->scn_visited_this_txg
++;
774 "visiting ds=%p/%llu zb=%llx/%llx/%llx/%llx bp=%p",
775 ds
, ds
? ds
->ds_object
: 0,
776 zb
->zb_objset
, zb
->zb_object
, zb
->zb_level
, zb
->zb_blkid
,
779 if (bp
->blk_birth
<= scn
->scn_phys
.scn_cur_min_txg
)
782 if (dsl_scan_recurse(scn
, ds
, ostype
, dnp
, &bp_toread
, zb
, tx
) != 0)
786 * If dsl_scan_ddt() has already visited this block, it will have
787 * already done any translations or scrubbing, so don't call the
790 if (ddt_class_contains(dp
->dp_spa
,
791 scn
->scn_phys
.scn_ddt_class_max
, bp
)) {
797 * If this block is from the future (after cur_max_txg), then we
798 * are doing this on behalf of a deleted snapshot, and we will
799 * revisit the future block on the next pass of this dataset.
800 * Don't scan it now unless we need to because something
801 * under it was modified.
803 if (BP_PHYSICAL_BIRTH(bp
) <= scn
->scn_phys
.scn_cur_max_txg
) {
804 scan_funcs
[scn
->scn_phys
.scn_func
](dp
, bp
, zb
);
809 dsl_scan_visit_rootbp(dsl_scan_t
*scn
, dsl_dataset_t
*ds
, blkptr_t
*bp
,
814 SET_BOOKMARK(&zb
, ds
? ds
->ds_object
: DMU_META_OBJSET
,
815 ZB_ROOT_OBJECT
, ZB_ROOT_LEVEL
, ZB_ROOT_BLKID
);
816 dsl_scan_visitbp(bp
, &zb
, NULL
,
817 ds
, scn
, DMU_OST_NONE
, tx
);
819 dprintf_ds(ds
, "finished scan%s", "");
823 dsl_scan_ds_destroyed(dsl_dataset_t
*ds
, dmu_tx_t
*tx
)
825 dsl_pool_t
*dp
= ds
->ds_dir
->dd_pool
;
826 dsl_scan_t
*scn
= dp
->dp_scan
;
829 if (scn
->scn_phys
.scn_state
!= DSS_SCANNING
)
832 if (scn
->scn_phys
.scn_bookmark
.zb_objset
== ds
->ds_object
) {
833 if (ds
->ds_is_snapshot
) {
836 * - scn_cur_{min,max}_txg stays the same.
837 * - Setting the flag is not really necessary if
838 * scn_cur_max_txg == scn_max_txg, because there
839 * is nothing after this snapshot that we care
840 * about. However, we set it anyway and then
841 * ignore it when we retraverse it in
842 * dsl_scan_visitds().
844 scn
->scn_phys
.scn_bookmark
.zb_objset
=
845 dsl_dataset_phys(ds
)->ds_next_snap_obj
;
846 zfs_dbgmsg("destroying ds %llu; currently traversing; "
847 "reset zb_objset to %llu",
848 (u_longlong_t
)ds
->ds_object
,
849 (u_longlong_t
)dsl_dataset_phys(ds
)->
851 scn
->scn_phys
.scn_flags
|= DSF_VISIT_DS_AGAIN
;
853 SET_BOOKMARK(&scn
->scn_phys
.scn_bookmark
,
854 ZB_DESTROYED_OBJSET
, 0, 0, 0);
855 zfs_dbgmsg("destroying ds %llu; currently traversing; "
856 "reset bookmark to -1,0,0,0",
857 (u_longlong_t
)ds
->ds_object
);
859 } else if (zap_lookup_int_key(dp
->dp_meta_objset
,
860 scn
->scn_phys
.scn_queue_obj
, ds
->ds_object
, &mintxg
) == 0) {
861 ASSERT3U(dsl_dataset_phys(ds
)->ds_num_children
, <=, 1);
862 VERIFY3U(0, ==, zap_remove_int(dp
->dp_meta_objset
,
863 scn
->scn_phys
.scn_queue_obj
, ds
->ds_object
, tx
));
864 if (ds
->ds_is_snapshot
) {
866 * We keep the same mintxg; it could be >
867 * ds_creation_txg if the previous snapshot was
870 VERIFY(zap_add_int_key(dp
->dp_meta_objset
,
871 scn
->scn_phys
.scn_queue_obj
,
872 dsl_dataset_phys(ds
)->ds_next_snap_obj
,
874 zfs_dbgmsg("destroying ds %llu; in queue; "
875 "replacing with %llu",
876 (u_longlong_t
)ds
->ds_object
,
877 (u_longlong_t
)dsl_dataset_phys(ds
)->
880 zfs_dbgmsg("destroying ds %llu; in queue; removing",
881 (u_longlong_t
)ds
->ds_object
);
886 * dsl_scan_sync() should be called after this, and should sync
887 * out our changed state, but just to be safe, do it here.
889 dsl_scan_sync_state(scn
, tx
);
893 dsl_scan_ds_snapshotted(dsl_dataset_t
*ds
, dmu_tx_t
*tx
)
895 dsl_pool_t
*dp
= ds
->ds_dir
->dd_pool
;
896 dsl_scan_t
*scn
= dp
->dp_scan
;
899 if (scn
->scn_phys
.scn_state
!= DSS_SCANNING
)
902 ASSERT(dsl_dataset_phys(ds
)->ds_prev_snap_obj
!= 0);
904 if (scn
->scn_phys
.scn_bookmark
.zb_objset
== ds
->ds_object
) {
905 scn
->scn_phys
.scn_bookmark
.zb_objset
=
906 dsl_dataset_phys(ds
)->ds_prev_snap_obj
;
907 zfs_dbgmsg("snapshotting ds %llu; currently traversing; "
908 "reset zb_objset to %llu",
909 (u_longlong_t
)ds
->ds_object
,
910 (u_longlong_t
)dsl_dataset_phys(ds
)->ds_prev_snap_obj
);
911 } else if (zap_lookup_int_key(dp
->dp_meta_objset
,
912 scn
->scn_phys
.scn_queue_obj
, ds
->ds_object
, &mintxg
) == 0) {
913 VERIFY3U(0, ==, zap_remove_int(dp
->dp_meta_objset
,
914 scn
->scn_phys
.scn_queue_obj
, ds
->ds_object
, tx
));
915 VERIFY(zap_add_int_key(dp
->dp_meta_objset
,
916 scn
->scn_phys
.scn_queue_obj
,
917 dsl_dataset_phys(ds
)->ds_prev_snap_obj
, mintxg
, tx
) == 0);
918 zfs_dbgmsg("snapshotting ds %llu; in queue; "
919 "replacing with %llu",
920 (u_longlong_t
)ds
->ds_object
,
921 (u_longlong_t
)dsl_dataset_phys(ds
)->ds_prev_snap_obj
);
923 dsl_scan_sync_state(scn
, tx
);
927 dsl_scan_ds_clone_swapped(dsl_dataset_t
*ds1
, dsl_dataset_t
*ds2
, dmu_tx_t
*tx
)
929 dsl_pool_t
*dp
= ds1
->ds_dir
->dd_pool
;
930 dsl_scan_t
*scn
= dp
->dp_scan
;
933 if (scn
->scn_phys
.scn_state
!= DSS_SCANNING
)
936 if (scn
->scn_phys
.scn_bookmark
.zb_objset
== ds1
->ds_object
) {
937 scn
->scn_phys
.scn_bookmark
.zb_objset
= ds2
->ds_object
;
938 zfs_dbgmsg("clone_swap ds %llu; currently traversing; "
939 "reset zb_objset to %llu",
940 (u_longlong_t
)ds1
->ds_object
,
941 (u_longlong_t
)ds2
->ds_object
);
942 } else if (scn
->scn_phys
.scn_bookmark
.zb_objset
== ds2
->ds_object
) {
943 scn
->scn_phys
.scn_bookmark
.zb_objset
= ds1
->ds_object
;
944 zfs_dbgmsg("clone_swap ds %llu; currently traversing; "
945 "reset zb_objset to %llu",
946 (u_longlong_t
)ds2
->ds_object
,
947 (u_longlong_t
)ds1
->ds_object
);
950 if (zap_lookup_int_key(dp
->dp_meta_objset
, scn
->scn_phys
.scn_queue_obj
,
951 ds1
->ds_object
, &mintxg
) == 0) {
954 ASSERT3U(mintxg
, ==, dsl_dataset_phys(ds1
)->ds_prev_snap_txg
);
955 ASSERT3U(mintxg
, ==, dsl_dataset_phys(ds2
)->ds_prev_snap_txg
);
956 VERIFY3U(0, ==, zap_remove_int(dp
->dp_meta_objset
,
957 scn
->scn_phys
.scn_queue_obj
, ds1
->ds_object
, tx
));
958 err
= zap_add_int_key(dp
->dp_meta_objset
,
959 scn
->scn_phys
.scn_queue_obj
, ds2
->ds_object
, mintxg
, tx
);
960 VERIFY(err
== 0 || err
== EEXIST
);
962 /* Both were there to begin with */
963 VERIFY(0 == zap_add_int_key(dp
->dp_meta_objset
,
964 scn
->scn_phys
.scn_queue_obj
,
965 ds1
->ds_object
, mintxg
, tx
));
967 zfs_dbgmsg("clone_swap ds %llu; in queue; "
968 "replacing with %llu",
969 (u_longlong_t
)ds1
->ds_object
,
970 (u_longlong_t
)ds2
->ds_object
);
971 } else if (zap_lookup_int_key(dp
->dp_meta_objset
,
972 scn
->scn_phys
.scn_queue_obj
, ds2
->ds_object
, &mintxg
) == 0) {
973 ASSERT3U(mintxg
, ==, dsl_dataset_phys(ds1
)->ds_prev_snap_txg
);
974 ASSERT3U(mintxg
, ==, dsl_dataset_phys(ds2
)->ds_prev_snap_txg
);
975 VERIFY3U(0, ==, zap_remove_int(dp
->dp_meta_objset
,
976 scn
->scn_phys
.scn_queue_obj
, ds2
->ds_object
, tx
));
977 VERIFY(0 == zap_add_int_key(dp
->dp_meta_objset
,
978 scn
->scn_phys
.scn_queue_obj
, ds1
->ds_object
, mintxg
, tx
));
979 zfs_dbgmsg("clone_swap ds %llu; in queue; "
980 "replacing with %llu",
981 (u_longlong_t
)ds2
->ds_object
,
982 (u_longlong_t
)ds1
->ds_object
);
985 dsl_scan_sync_state(scn
, tx
);
988 struct enqueue_clones_arg
{
995 enqueue_clones_cb(dsl_pool_t
*dp
, dsl_dataset_t
*hds
, void *arg
)
997 struct enqueue_clones_arg
*eca
= arg
;
1000 dsl_scan_t
*scn
= dp
->dp_scan
;
1002 if (dsl_dir_phys(hds
->ds_dir
)->dd_origin_obj
!= eca
->originobj
)
1005 err
= dsl_dataset_hold_obj(dp
, hds
->ds_object
, FTAG
, &ds
);
1009 while (dsl_dataset_phys(ds
)->ds_prev_snap_obj
!= eca
->originobj
) {
1010 dsl_dataset_t
*prev
;
1011 err
= dsl_dataset_hold_obj(dp
,
1012 dsl_dataset_phys(ds
)->ds_prev_snap_obj
, FTAG
, &prev
);
1014 dsl_dataset_rele(ds
, FTAG
);
1019 VERIFY(zap_add_int_key(dp
->dp_meta_objset
,
1020 scn
->scn_phys
.scn_queue_obj
, ds
->ds_object
,
1021 dsl_dataset_phys(ds
)->ds_prev_snap_txg
, eca
->tx
) == 0);
1022 dsl_dataset_rele(ds
, FTAG
);
1027 dsl_scan_visitds(dsl_scan_t
*scn
, uint64_t dsobj
, dmu_tx_t
*tx
)
1029 dsl_pool_t
*dp
= scn
->scn_dp
;
1033 VERIFY3U(0, ==, dsl_dataset_hold_obj(dp
, dsobj
, FTAG
, &ds
));
1035 if (scn
->scn_phys
.scn_cur_min_txg
>=
1036 scn
->scn_phys
.scn_max_txg
) {
1038 * This can happen if this snapshot was created after the
1039 * scan started, and we already completed a previous snapshot
1040 * that was created after the scan started. This snapshot
1041 * only references blocks with:
1043 * birth < our ds_creation_txg
1044 * cur_min_txg is no less than ds_creation_txg.
1045 * We have already visited these blocks.
1047 * birth > scn_max_txg
1048 * The scan requested not to visit these blocks.
1050 * Subsequent snapshots (and clones) can reference our
1051 * blocks, or blocks with even higher birth times.
1052 * Therefore we do not need to visit them either,
1053 * so we do not add them to the work queue.
1055 * Note that checking for cur_min_txg >= cur_max_txg
1056 * is not sufficient, because in that case we may need to
1057 * visit subsequent snapshots. This happens when min_txg > 0,
1058 * which raises cur_min_txg. In this case we will visit
1059 * this dataset but skip all of its blocks, because the
1060 * rootbp's birth time is < cur_min_txg. Then we will
1061 * add the next snapshots/clones to the work queue.
1063 char *dsname
= kmem_alloc(MAXNAMELEN
, KM_SLEEP
);
1064 dsl_dataset_name(ds
, dsname
);
1065 zfs_dbgmsg("scanning dataset %llu (%s) is unnecessary because "
1066 "cur_min_txg (%llu) >= max_txg (%llu)",
1068 scn
->scn_phys
.scn_cur_min_txg
,
1069 scn
->scn_phys
.scn_max_txg
);
1070 kmem_free(dsname
, MAXNAMELEN
);
1075 if (dmu_objset_from_ds(ds
, &os
))
1079 * Only the ZIL in the head (non-snapshot) is valid. Even though
1080 * snapshots can have ZIL block pointers (which may be the same
1081 * BP as in the head), they must be ignored. So we traverse the
1082 * ZIL here, rather than in scan_recurse(), because the regular
1083 * snapshot block-sharing rules don't apply to it.
1085 if (DSL_SCAN_IS_SCRUB_RESILVER(scn
) && !ds
->ds_is_snapshot
)
1086 dsl_scan_zil(dp
, &os
->os_zil_header
);
1089 * Iterate over the bps in this ds.
1091 dmu_buf_will_dirty(ds
->ds_dbuf
, tx
);
1092 rrw_enter(&ds
->ds_bp_rwlock
, RW_READER
, FTAG
);
1093 dsl_scan_visit_rootbp(scn
, ds
, &dsl_dataset_phys(ds
)->ds_bp
, tx
);
1094 rrw_exit(&ds
->ds_bp_rwlock
, FTAG
);
1096 char *dsname
= kmem_alloc(ZFS_MAX_DATASET_NAME_LEN
, KM_SLEEP
);
1097 dsl_dataset_name(ds
, dsname
);
1098 zfs_dbgmsg("scanned dataset %llu (%s) with min=%llu max=%llu; "
1100 (longlong_t
)dsobj
, dsname
,
1101 (longlong_t
)scn
->scn_phys
.scn_cur_min_txg
,
1102 (longlong_t
)scn
->scn_phys
.scn_cur_max_txg
,
1103 (int)scn
->scn_pausing
);
1104 kmem_free(dsname
, ZFS_MAX_DATASET_NAME_LEN
);
1106 if (scn
->scn_pausing
)
1110 * We've finished this pass over this dataset.
1114 * If we did not completely visit this dataset, do another pass.
1116 if (scn
->scn_phys
.scn_flags
& DSF_VISIT_DS_AGAIN
) {
1117 zfs_dbgmsg("incomplete pass; visiting again");
1118 scn
->scn_phys
.scn_flags
&= ~DSF_VISIT_DS_AGAIN
;
1119 VERIFY(zap_add_int_key(dp
->dp_meta_objset
,
1120 scn
->scn_phys
.scn_queue_obj
, ds
->ds_object
,
1121 scn
->scn_phys
.scn_cur_max_txg
, tx
) == 0);
1126 * Add descendent datasets to work queue.
1128 if (dsl_dataset_phys(ds
)->ds_next_snap_obj
!= 0) {
1129 VERIFY(zap_add_int_key(dp
->dp_meta_objset
,
1130 scn
->scn_phys
.scn_queue_obj
,
1131 dsl_dataset_phys(ds
)->ds_next_snap_obj
,
1132 dsl_dataset_phys(ds
)->ds_creation_txg
, tx
) == 0);
1134 if (dsl_dataset_phys(ds
)->ds_num_children
> 1) {
1135 boolean_t usenext
= B_FALSE
;
1136 if (dsl_dataset_phys(ds
)->ds_next_clones_obj
!= 0) {
1139 * A bug in a previous version of the code could
1140 * cause upgrade_clones_cb() to not set
1141 * ds_next_snap_obj when it should, leading to a
1142 * missing entry. Therefore we can only use the
1143 * next_clones_obj when its count is correct.
1145 int err
= zap_count(dp
->dp_meta_objset
,
1146 dsl_dataset_phys(ds
)->ds_next_clones_obj
, &count
);
1148 count
== dsl_dataset_phys(ds
)->ds_num_children
- 1)
1153 VERIFY0(zap_join_key(dp
->dp_meta_objset
,
1154 dsl_dataset_phys(ds
)->ds_next_clones_obj
,
1155 scn
->scn_phys
.scn_queue_obj
,
1156 dsl_dataset_phys(ds
)->ds_creation_txg
, tx
));
1158 struct enqueue_clones_arg eca
;
1160 eca
.originobj
= ds
->ds_object
;
1162 VERIFY0(dmu_objset_find_dp(dp
, dp
->dp_root_dir_obj
,
1163 enqueue_clones_cb
, &eca
, DS_FIND_CHILDREN
));
1168 dsl_dataset_rele(ds
, FTAG
);
1173 enqueue_cb(dsl_pool_t
*dp
, dsl_dataset_t
*hds
, void *arg
)
1178 dsl_scan_t
*scn
= dp
->dp_scan
;
1180 err
= dsl_dataset_hold_obj(dp
, hds
->ds_object
, FTAG
, &ds
);
1184 while (dsl_dataset_phys(ds
)->ds_prev_snap_obj
!= 0) {
1185 dsl_dataset_t
*prev
;
1186 err
= dsl_dataset_hold_obj(dp
,
1187 dsl_dataset_phys(ds
)->ds_prev_snap_obj
, FTAG
, &prev
);
1189 dsl_dataset_rele(ds
, FTAG
);
1194 * If this is a clone, we don't need to worry about it for now.
1196 if (dsl_dataset_phys(prev
)->ds_next_snap_obj
!= ds
->ds_object
) {
1197 dsl_dataset_rele(ds
, FTAG
);
1198 dsl_dataset_rele(prev
, FTAG
);
1201 dsl_dataset_rele(ds
, FTAG
);
1205 VERIFY(zap_add_int_key(dp
->dp_meta_objset
, scn
->scn_phys
.scn_queue_obj
,
1206 ds
->ds_object
, dsl_dataset_phys(ds
)->ds_prev_snap_txg
, tx
) == 0);
1207 dsl_dataset_rele(ds
, FTAG
);
1212 * Scrub/dedup interaction.
1214 * If there are N references to a deduped block, we don't want to scrub it
1215 * N times -- ideally, we should scrub it exactly once.
1217 * We leverage the fact that the dde's replication class (enum ddt_class)
1218 * is ordered from highest replication class (DDT_CLASS_DITTO) to lowest
1219 * (DDT_CLASS_UNIQUE) so that we may walk the DDT in that order.
1221 * To prevent excess scrubbing, the scrub begins by walking the DDT
1222 * to find all blocks with refcnt > 1, and scrubs each of these once.
1223 * Since there are two replication classes which contain blocks with
1224 * refcnt > 1, we scrub the highest replication class (DDT_CLASS_DITTO) first.
1225 * Finally the top-down scrub begins, only visiting blocks with refcnt == 1.
1227 * There would be nothing more to say if a block's refcnt couldn't change
1228 * during a scrub, but of course it can so we must account for changes
1229 * in a block's replication class.
1231 * Here's an example of what can occur:
1233 * If a block has refcnt > 1 during the DDT scrub phase, but has refcnt == 1
1234 * when visited during the top-down scrub phase, it will be scrubbed twice.
1235 * This negates our scrub optimization, but is otherwise harmless.
1237 * If a block has refcnt == 1 during the DDT scrub phase, but has refcnt > 1
1238 * on each visit during the top-down scrub phase, it will never be scrubbed.
1239 * To catch this, ddt_sync_entry() notifies the scrub code whenever a block's
1240 * reference class transitions to a higher level (i.e DDT_CLASS_UNIQUE to
1241 * DDT_CLASS_DUPLICATE); if it transitions from refcnt == 1 to refcnt > 1
1242 * while a scrub is in progress, it scrubs the block right then.
1245 dsl_scan_ddt(dsl_scan_t
*scn
, dmu_tx_t
*tx
)
1247 ddt_bookmark_t
*ddb
= &scn
->scn_phys
.scn_ddt_bookmark
;
1248 ddt_entry_t dde
= { 0 };
1252 while ((error
= ddt_walk(scn
->scn_dp
->dp_spa
, ddb
, &dde
)) == 0) {
1255 if (ddb
->ddb_class
> scn
->scn_phys
.scn_ddt_class_max
)
1257 dprintf("visiting ddb=%llu/%llu/%llu/%llx\n",
1258 (longlong_t
)ddb
->ddb_class
,
1259 (longlong_t
)ddb
->ddb_type
,
1260 (longlong_t
)ddb
->ddb_checksum
,
1261 (longlong_t
)ddb
->ddb_cursor
);
1263 /* There should be no pending changes to the dedup table */
1264 ddt
= scn
->scn_dp
->dp_spa
->spa_ddt
[ddb
->ddb_checksum
];
1265 ASSERT(avl_first(&ddt
->ddt_tree
) == NULL
);
1267 dsl_scan_ddt_entry(scn
, ddb
->ddb_checksum
, &dde
, tx
);
1270 if (dsl_scan_check_pause(scn
, NULL
))
1274 zfs_dbgmsg("scanned %llu ddt entries with class_max = %u; pausing=%u",
1275 (longlong_t
)n
, (int)scn
->scn_phys
.scn_ddt_class_max
,
1276 (int)scn
->scn_pausing
);
1278 ASSERT(error
== 0 || error
== ENOENT
);
1279 ASSERT(error
!= ENOENT
||
1280 ddb
->ddb_class
> scn
->scn_phys
.scn_ddt_class_max
);
1285 dsl_scan_ddt_entry(dsl_scan_t
*scn
, enum zio_checksum checksum
,
1286 ddt_entry_t
*dde
, dmu_tx_t
*tx
)
1288 const ddt_key_t
*ddk
= &dde
->dde_key
;
1289 ddt_phys_t
*ddp
= dde
->dde_phys
;
1291 zbookmark_phys_t zb
= { 0 };
1293 if (scn
->scn_phys
.scn_state
!= DSS_SCANNING
)
1296 for (int p
= 0; p
< DDT_PHYS_TYPES
; p
++, ddp
++) {
1297 if (ddp
->ddp_phys_birth
== 0 ||
1298 ddp
->ddp_phys_birth
> scn
->scn_phys
.scn_max_txg
)
1300 ddt_bp_create(checksum
, ddk
, ddp
, &bp
);
1302 scn
->scn_visited_this_txg
++;
1303 scan_funcs
[scn
->scn_phys
.scn_func
](scn
->scn_dp
, &bp
, &zb
);
1308 dsl_scan_visit(dsl_scan_t
*scn
, dmu_tx_t
*tx
)
1310 dsl_pool_t
*dp
= scn
->scn_dp
;
1314 if (scn
->scn_phys
.scn_ddt_bookmark
.ddb_class
<=
1315 scn
->scn_phys
.scn_ddt_class_max
) {
1316 scn
->scn_phys
.scn_cur_min_txg
= scn
->scn_phys
.scn_min_txg
;
1317 scn
->scn_phys
.scn_cur_max_txg
= scn
->scn_phys
.scn_max_txg
;
1318 dsl_scan_ddt(scn
, tx
);
1319 if (scn
->scn_pausing
)
1323 if (scn
->scn_phys
.scn_bookmark
.zb_objset
== DMU_META_OBJSET
) {
1324 /* First do the MOS & ORIGIN */
1326 scn
->scn_phys
.scn_cur_min_txg
= scn
->scn_phys
.scn_min_txg
;
1327 scn
->scn_phys
.scn_cur_max_txg
= scn
->scn_phys
.scn_max_txg
;
1328 dsl_scan_visit_rootbp(scn
, NULL
,
1329 &dp
->dp_meta_rootbp
, tx
);
1330 spa_set_rootblkptr(dp
->dp_spa
, &dp
->dp_meta_rootbp
);
1331 if (scn
->scn_pausing
)
1334 if (spa_version(dp
->dp_spa
) < SPA_VERSION_DSL_SCRUB
) {
1335 VERIFY0(dmu_objset_find_dp(dp
, dp
->dp_root_dir_obj
,
1336 enqueue_cb
, tx
, DS_FIND_CHILDREN
));
1338 dsl_scan_visitds(scn
,
1339 dp
->dp_origin_snap
->ds_object
, tx
);
1341 ASSERT(!scn
->scn_pausing
);
1342 } else if (scn
->scn_phys
.scn_bookmark
.zb_objset
!=
1343 ZB_DESTROYED_OBJSET
) {
1345 * If we were paused, continue from here. Note if the
1346 * ds we were paused on was deleted, the zb_objset may
1347 * be -1, so we will skip this and find a new objset
1350 dsl_scan_visitds(scn
, scn
->scn_phys
.scn_bookmark
.zb_objset
, tx
);
1351 if (scn
->scn_pausing
)
1356 * In case we were paused right at the end of the ds, zero the
1357 * bookmark so we don't think that we're still trying to resume.
1359 bzero(&scn
->scn_phys
.scn_bookmark
, sizeof (zbookmark_phys_t
));
1361 /* keep pulling things out of the zap-object-as-queue */
1362 while (zap_cursor_init(&zc
, dp
->dp_meta_objset
,
1363 scn
->scn_phys
.scn_queue_obj
),
1364 zap_cursor_retrieve(&zc
, &za
) == 0) {
1368 dsobj
= zfs_strtonum(za
.za_name
, NULL
);
1369 VERIFY3U(0, ==, zap_remove_int(dp
->dp_meta_objset
,
1370 scn
->scn_phys
.scn_queue_obj
, dsobj
, tx
));
1372 /* Set up min/max txg */
1373 VERIFY3U(0, ==, dsl_dataset_hold_obj(dp
, dsobj
, FTAG
, &ds
));
1374 if (za
.za_first_integer
!= 0) {
1375 scn
->scn_phys
.scn_cur_min_txg
=
1376 MAX(scn
->scn_phys
.scn_min_txg
,
1377 za
.za_first_integer
);
1379 scn
->scn_phys
.scn_cur_min_txg
=
1380 MAX(scn
->scn_phys
.scn_min_txg
,
1381 dsl_dataset_phys(ds
)->ds_prev_snap_txg
);
1383 scn
->scn_phys
.scn_cur_max_txg
= dsl_scan_ds_maxtxg(ds
);
1384 dsl_dataset_rele(ds
, FTAG
);
1386 dsl_scan_visitds(scn
, dsobj
, tx
);
1387 zap_cursor_fini(&zc
);
1388 if (scn
->scn_pausing
)
1391 zap_cursor_fini(&zc
);
1395 dsl_scan_free_should_pause(dsl_scan_t
*scn
)
1397 uint64_t elapsed_nanosecs
;
1402 if (scn
->scn_visited_this_txg
>= zfs_free_max_blocks
)
1405 elapsed_nanosecs
= gethrtime() - scn
->scn_sync_start_time
;
1406 return (elapsed_nanosecs
/ NANOSEC
> zfs_txg_timeout
||
1407 (NSEC2MSEC(elapsed_nanosecs
) > zfs_free_min_time_ms
&&
1408 txg_sync_waiting(scn
->scn_dp
)) ||
1409 spa_shutting_down(scn
->scn_dp
->dp_spa
));
1413 dsl_scan_free_block_cb(void *arg
, const blkptr_t
*bp
, dmu_tx_t
*tx
)
1415 dsl_scan_t
*scn
= arg
;
1417 if (!scn
->scn_is_bptree
||
1418 (BP_GET_LEVEL(bp
) == 0 && BP_GET_TYPE(bp
) != DMU_OT_OBJSET
)) {
1419 if (dsl_scan_free_should_pause(scn
))
1420 return (SET_ERROR(ERESTART
));
1423 zio_nowait(zio_free_sync(scn
->scn_zio_root
, scn
->scn_dp
->dp_spa
,
1424 dmu_tx_get_txg(tx
), bp
, 0));
1425 dsl_dir_diduse_space(tx
->tx_pool
->dp_free_dir
, DD_USED_HEAD
,
1426 -bp_get_dsize_sync(scn
->scn_dp
->dp_spa
, bp
),
1427 -BP_GET_PSIZE(bp
), -BP_GET_UCSIZE(bp
), tx
);
1428 scn
->scn_visited_this_txg
++;
1433 dsl_scan_active(dsl_scan_t
*scn
)
1435 spa_t
*spa
= scn
->scn_dp
->dp_spa
;
1436 uint64_t used
= 0, comp
, uncomp
;
1438 if (spa
->spa_load_state
!= SPA_LOAD_NONE
)
1440 if (spa_shutting_down(spa
))
1442 if (scn
->scn_phys
.scn_state
== DSS_SCANNING
||
1443 (scn
->scn_async_destroying
&& !scn
->scn_async_stalled
))
1446 if (spa_version(scn
->scn_dp
->dp_spa
) >= SPA_VERSION_DEADLISTS
) {
1447 (void) bpobj_space(&scn
->scn_dp
->dp_free_bpobj
,
1448 &used
, &comp
, &uncomp
);
1453 /* Called whenever a txg syncs. */
1455 dsl_scan_sync(dsl_pool_t
*dp
, dmu_tx_t
*tx
)
1457 dsl_scan_t
*scn
= dp
->dp_scan
;
1458 spa_t
*spa
= dp
->dp_spa
;
1462 * Check for scn_restart_txg before checking spa_load_state, so
1463 * that we can restart an old-style scan while the pool is being
1464 * imported (see dsl_scan_init).
1466 if (dsl_scan_restarting(scn
, tx
)) {
1467 pool_scan_func_t func
= POOL_SCAN_SCRUB
;
1468 dsl_scan_done(scn
, B_FALSE
, tx
);
1469 if (vdev_resilver_needed(spa
->spa_root_vdev
, NULL
, NULL
))
1470 func
= POOL_SCAN_RESILVER
;
1471 zfs_dbgmsg("restarting scan func=%u txg=%llu",
1473 dsl_scan_setup_sync(&func
, tx
);
1477 * Only process scans in sync pass 1.
1479 if (spa_sync_pass(dp
->dp_spa
) > 1)
1483 * If the spa is shutting down, then stop scanning. This will
1484 * ensure that the scan does not dirty any new data during the
1487 if (spa_shutting_down(spa
))
1491 * If the scan is inactive due to a stalled async destroy, try again.
1493 if (!scn
->scn_async_stalled
&& !dsl_scan_active(scn
))
1496 scn
->scn_visited_this_txg
= 0;
1497 scn
->scn_pausing
= B_FALSE
;
1498 scn
->scn_sync_start_time
= gethrtime();
1499 spa
->spa_scrub_active
= B_TRUE
;
1502 * First process the async destroys. If we pause, don't do
1503 * any scrubbing or resilvering. This ensures that there are no
1504 * async destroys while we are scanning, so the scan code doesn't
1505 * have to worry about traversing it. It is also faster to free the
1506 * blocks than to scrub them.
1508 if (zfs_free_bpobj_enabled
&&
1509 spa_version(dp
->dp_spa
) >= SPA_VERSION_DEADLISTS
) {
1510 scn
->scn_is_bptree
= B_FALSE
;
1511 scn
->scn_zio_root
= zio_root(dp
->dp_spa
, NULL
,
1512 NULL
, ZIO_FLAG_MUSTSUCCEED
);
1513 err
= bpobj_iterate(&dp
->dp_free_bpobj
,
1514 dsl_scan_free_block_cb
, scn
, tx
);
1515 VERIFY3U(0, ==, zio_wait(scn
->scn_zio_root
));
1517 if (err
!= 0 && err
!= ERESTART
)
1518 zfs_panic_recover("error %u from bpobj_iterate()", err
);
1521 if (err
== 0 && spa_feature_is_active(spa
, SPA_FEATURE_ASYNC_DESTROY
)) {
1522 ASSERT(scn
->scn_async_destroying
);
1523 scn
->scn_is_bptree
= B_TRUE
;
1524 scn
->scn_zio_root
= zio_root(dp
->dp_spa
, NULL
,
1525 NULL
, ZIO_FLAG_MUSTSUCCEED
);
1526 err
= bptree_iterate(dp
->dp_meta_objset
,
1527 dp
->dp_bptree_obj
, B_TRUE
, dsl_scan_free_block_cb
, scn
, tx
);
1528 VERIFY0(zio_wait(scn
->scn_zio_root
));
1530 if (err
== EIO
|| err
== ECKSUM
) {
1532 } else if (err
!= 0 && err
!= ERESTART
) {
1533 zfs_panic_recover("error %u from "
1534 "traverse_dataset_destroyed()", err
);
1537 if (bptree_is_empty(dp
->dp_meta_objset
, dp
->dp_bptree_obj
)) {
1538 /* finished; deactivate async destroy feature */
1539 spa_feature_decr(spa
, SPA_FEATURE_ASYNC_DESTROY
, tx
);
1540 ASSERT(!spa_feature_is_active(spa
,
1541 SPA_FEATURE_ASYNC_DESTROY
));
1542 VERIFY0(zap_remove(dp
->dp_meta_objset
,
1543 DMU_POOL_DIRECTORY_OBJECT
,
1544 DMU_POOL_BPTREE_OBJ
, tx
));
1545 VERIFY0(bptree_free(dp
->dp_meta_objset
,
1546 dp
->dp_bptree_obj
, tx
));
1547 dp
->dp_bptree_obj
= 0;
1548 scn
->scn_async_destroying
= B_FALSE
;
1549 scn
->scn_async_stalled
= B_FALSE
;
1552 * If we didn't make progress, mark the async
1553 * destroy as stalled, so that we will not initiate
1554 * a spa_sync() on its behalf. Note that we only
1555 * check this if we are not finished, because if the
1556 * bptree had no blocks for us to visit, we can
1557 * finish without "making progress".
1559 scn
->scn_async_stalled
=
1560 (scn
->scn_visited_this_txg
== 0);
1563 if (scn
->scn_visited_this_txg
) {
1564 zfs_dbgmsg("freed %llu blocks in %llums from "
1565 "free_bpobj/bptree txg %llu; err=%u",
1566 (longlong_t
)scn
->scn_visited_this_txg
,
1568 NSEC2MSEC(gethrtime() - scn
->scn_sync_start_time
),
1569 (longlong_t
)tx
->tx_txg
, err
);
1570 scn
->scn_visited_this_txg
= 0;
1573 * Write out changes to the DDT that may be required as a
1574 * result of the blocks freed. This ensures that the DDT
1575 * is clean when a scrub/resilver runs.
1577 ddt_sync(spa
, tx
->tx_txg
);
1581 if (dp
->dp_free_dir
!= NULL
&& !scn
->scn_async_destroying
&&
1582 zfs_free_leak_on_eio
&&
1583 (dsl_dir_phys(dp
->dp_free_dir
)->dd_used_bytes
!= 0 ||
1584 dsl_dir_phys(dp
->dp_free_dir
)->dd_compressed_bytes
!= 0 ||
1585 dsl_dir_phys(dp
->dp_free_dir
)->dd_uncompressed_bytes
!= 0)) {
1587 * We have finished background destroying, but there is still
1588 * some space left in the dp_free_dir. Transfer this leaked
1589 * space to the dp_leak_dir.
1591 if (dp
->dp_leak_dir
== NULL
) {
1592 rrw_enter(&dp
->dp_config_rwlock
, RW_WRITER
, FTAG
);
1593 (void) dsl_dir_create_sync(dp
, dp
->dp_root_dir
,
1595 VERIFY0(dsl_pool_open_special_dir(dp
,
1596 LEAK_DIR_NAME
, &dp
->dp_leak_dir
));
1597 rrw_exit(&dp
->dp_config_rwlock
, FTAG
);
1599 dsl_dir_diduse_space(dp
->dp_leak_dir
, DD_USED_HEAD
,
1600 dsl_dir_phys(dp
->dp_free_dir
)->dd_used_bytes
,
1601 dsl_dir_phys(dp
->dp_free_dir
)->dd_compressed_bytes
,
1602 dsl_dir_phys(dp
->dp_free_dir
)->dd_uncompressed_bytes
, tx
);
1603 dsl_dir_diduse_space(dp
->dp_free_dir
, DD_USED_HEAD
,
1604 -dsl_dir_phys(dp
->dp_free_dir
)->dd_used_bytes
,
1605 -dsl_dir_phys(dp
->dp_free_dir
)->dd_compressed_bytes
,
1606 -dsl_dir_phys(dp
->dp_free_dir
)->dd_uncompressed_bytes
, tx
);
1608 if (dp
->dp_free_dir
!= NULL
&& !scn
->scn_async_destroying
) {
1609 /* finished; verify that space accounting went to zero */
1610 ASSERT0(dsl_dir_phys(dp
->dp_free_dir
)->dd_used_bytes
);
1611 ASSERT0(dsl_dir_phys(dp
->dp_free_dir
)->dd_compressed_bytes
);
1612 ASSERT0(dsl_dir_phys(dp
->dp_free_dir
)->dd_uncompressed_bytes
);
1615 if (scn
->scn_phys
.scn_state
!= DSS_SCANNING
)
1618 if (scn
->scn_done_txg
== tx
->tx_txg
) {
1619 ASSERT(!scn
->scn_pausing
);
1620 /* finished with scan. */
1621 zfs_dbgmsg("txg %llu scan complete", tx
->tx_txg
);
1622 dsl_scan_done(scn
, B_TRUE
, tx
);
1623 ASSERT3U(spa
->spa_scrub_inflight
, ==, 0);
1624 dsl_scan_sync_state(scn
, tx
);
1628 if (scn
->scn_phys
.scn_ddt_bookmark
.ddb_class
<=
1629 scn
->scn_phys
.scn_ddt_class_max
) {
1630 zfs_dbgmsg("doing scan sync txg %llu; "
1631 "ddt bm=%llu/%llu/%llu/%llx",
1632 (longlong_t
)tx
->tx_txg
,
1633 (longlong_t
)scn
->scn_phys
.scn_ddt_bookmark
.ddb_class
,
1634 (longlong_t
)scn
->scn_phys
.scn_ddt_bookmark
.ddb_type
,
1635 (longlong_t
)scn
->scn_phys
.scn_ddt_bookmark
.ddb_checksum
,
1636 (longlong_t
)scn
->scn_phys
.scn_ddt_bookmark
.ddb_cursor
);
1637 ASSERT(scn
->scn_phys
.scn_bookmark
.zb_objset
== 0);
1638 ASSERT(scn
->scn_phys
.scn_bookmark
.zb_object
== 0);
1639 ASSERT(scn
->scn_phys
.scn_bookmark
.zb_level
== 0);
1640 ASSERT(scn
->scn_phys
.scn_bookmark
.zb_blkid
== 0);
1642 zfs_dbgmsg("doing scan sync txg %llu; bm=%llu/%llu/%llu/%llu",
1643 (longlong_t
)tx
->tx_txg
,
1644 (longlong_t
)scn
->scn_phys
.scn_bookmark
.zb_objset
,
1645 (longlong_t
)scn
->scn_phys
.scn_bookmark
.zb_object
,
1646 (longlong_t
)scn
->scn_phys
.scn_bookmark
.zb_level
,
1647 (longlong_t
)scn
->scn_phys
.scn_bookmark
.zb_blkid
);
1650 scn
->scn_zio_root
= zio_root(dp
->dp_spa
, NULL
,
1651 NULL
, ZIO_FLAG_CANFAIL
);
1652 dsl_pool_config_enter(dp
, FTAG
);
1653 dsl_scan_visit(scn
, tx
);
1654 dsl_pool_config_exit(dp
, FTAG
);
1655 (void) zio_wait(scn
->scn_zio_root
);
1656 scn
->scn_zio_root
= NULL
;
1658 zfs_dbgmsg("visited %llu blocks in %llums",
1659 (longlong_t
)scn
->scn_visited_this_txg
,
1660 (longlong_t
)NSEC2MSEC(gethrtime() - scn
->scn_sync_start_time
));
1662 if (!scn
->scn_pausing
) {
1663 scn
->scn_done_txg
= tx
->tx_txg
+ 1;
1664 zfs_dbgmsg("txg %llu traversal complete, waiting till txg %llu",
1665 tx
->tx_txg
, scn
->scn_done_txg
);
1668 if (DSL_SCAN_IS_SCRUB_RESILVER(scn
)) {
1669 mutex_enter(&spa
->spa_scrub_lock
);
1670 while (spa
->spa_scrub_inflight
> 0) {
1671 cv_wait(&spa
->spa_scrub_io_cv
,
1672 &spa
->spa_scrub_lock
);
1674 mutex_exit(&spa
->spa_scrub_lock
);
1677 dsl_scan_sync_state(scn
, tx
);
1681 * This will start a new scan, or restart an existing one.
1684 dsl_resilver_restart(dsl_pool_t
*dp
, uint64_t txg
)
1688 tx
= dmu_tx_create_dd(dp
->dp_mos_dir
);
1689 VERIFY(0 == dmu_tx_assign(tx
, TXG_WAIT
));
1691 txg
= dmu_tx_get_txg(tx
);
1692 dp
->dp_scan
->scn_restart_txg
= txg
;
1695 dp
->dp_scan
->scn_restart_txg
= txg
;
1697 zfs_dbgmsg("restarting resilver txg=%llu", txg
);
1701 dsl_scan_resilvering(dsl_pool_t
*dp
)
1703 return (dp
->dp_scan
->scn_phys
.scn_state
== DSS_SCANNING
&&
1704 dp
->dp_scan
->scn_phys
.scn_func
== POOL_SCAN_RESILVER
);
1712 count_block(zfs_all_blkstats_t
*zab
, const blkptr_t
*bp
)
1717 * If we resume after a reboot, zab will be NULL; don't record
1718 * incomplete stats in that case.
1723 for (i
= 0; i
< 4; i
++) {
1724 int l
= (i
< 2) ? BP_GET_LEVEL(bp
) : DN_MAX_LEVELS
;
1725 int t
= (i
& 1) ? BP_GET_TYPE(bp
) : DMU_OT_TOTAL
;
1726 if (t
& DMU_OT_NEWTYPE
)
1728 zfs_blkstat_t
*zb
= &zab
->zab_type
[l
][t
];
1732 zb
->zb_asize
+= BP_GET_ASIZE(bp
);
1733 zb
->zb_lsize
+= BP_GET_LSIZE(bp
);
1734 zb
->zb_psize
+= BP_GET_PSIZE(bp
);
1735 zb
->zb_gangs
+= BP_COUNT_GANG(bp
);
1737 switch (BP_GET_NDVAS(bp
)) {
1739 if (DVA_GET_VDEV(&bp
->blk_dva
[0]) ==
1740 DVA_GET_VDEV(&bp
->blk_dva
[1]))
1741 zb
->zb_ditto_2_of_2_samevdev
++;
1744 equal
= (DVA_GET_VDEV(&bp
->blk_dva
[0]) ==
1745 DVA_GET_VDEV(&bp
->blk_dva
[1])) +
1746 (DVA_GET_VDEV(&bp
->blk_dva
[0]) ==
1747 DVA_GET_VDEV(&bp
->blk_dva
[2])) +
1748 (DVA_GET_VDEV(&bp
->blk_dva
[1]) ==
1749 DVA_GET_VDEV(&bp
->blk_dva
[2]));
1751 zb
->zb_ditto_2_of_3_samevdev
++;
1752 else if (equal
== 3)
1753 zb
->zb_ditto_3_of_3_samevdev
++;
1760 dsl_scan_scrub_done(zio_t
*zio
)
1762 spa_t
*spa
= zio
->io_spa
;
1764 abd_free(zio
->io_abd
);
1766 mutex_enter(&spa
->spa_scrub_lock
);
1767 spa
->spa_scrub_inflight
--;
1768 cv_broadcast(&spa
->spa_scrub_io_cv
);
1770 if (zio
->io_error
&& (zio
->io_error
!= ECKSUM
||
1771 !(zio
->io_flags
& ZIO_FLAG_SPECULATIVE
))) {
1772 spa
->spa_dsl_pool
->dp_scan
->scn_phys
.scn_errors
++;
1774 mutex_exit(&spa
->spa_scrub_lock
);
1778 dsl_scan_scrub_cb(dsl_pool_t
*dp
,
1779 const blkptr_t
*bp
, const zbookmark_phys_t
*zb
)
1781 dsl_scan_t
*scn
= dp
->dp_scan
;
1782 size_t size
= BP_GET_PSIZE(bp
);
1783 spa_t
*spa
= dp
->dp_spa
;
1784 uint64_t phys_birth
= BP_PHYSICAL_BIRTH(bp
);
1786 int zio_flags
= ZIO_FLAG_SCAN_THREAD
| ZIO_FLAG_RAW
| ZIO_FLAG_CANFAIL
;
1789 if (phys_birth
<= scn
->scn_phys
.scn_min_txg
||
1790 phys_birth
>= scn
->scn_phys
.scn_max_txg
)
1793 count_block(dp
->dp_blkstats
, bp
);
1795 if (BP_IS_EMBEDDED(bp
))
1798 ASSERT(DSL_SCAN_IS_SCRUB_RESILVER(scn
));
1799 if (scn
->scn_phys
.scn_func
== POOL_SCAN_SCRUB
) {
1800 zio_flags
|= ZIO_FLAG_SCRUB
;
1802 scan_delay
= zfs_scrub_delay
;
1804 ASSERT3U(scn
->scn_phys
.scn_func
, ==, POOL_SCAN_RESILVER
);
1805 zio_flags
|= ZIO_FLAG_RESILVER
;
1807 scan_delay
= zfs_resilver_delay
;
1810 /* If it's an intent log block, failure is expected. */
1811 if (zb
->zb_level
== ZB_ZIL_LEVEL
)
1812 zio_flags
|= ZIO_FLAG_SPECULATIVE
;
1814 for (int d
= 0; d
< BP_GET_NDVAS(bp
); d
++) {
1815 vdev_t
*vd
= vdev_lookup_top(spa
,
1816 DVA_GET_VDEV(&bp
->blk_dva
[d
]));
1819 * Keep track of how much data we've examined so that
1820 * zpool(1M) status can make useful progress reports.
1822 scn
->scn_phys
.scn_examined
+= DVA_GET_ASIZE(&bp
->blk_dva
[d
]);
1823 spa
->spa_scan_pass_exam
+= DVA_GET_ASIZE(&bp
->blk_dva
[d
]);
1825 /* if it's a resilver, this may not be in the target range */
1827 if (DVA_GET_GANG(&bp
->blk_dva
[d
])) {
1829 * Gang members may be spread across multiple
1830 * vdevs, so the best estimate we have is the
1831 * scrub range, which has already been checked.
1832 * XXX -- it would be better to change our
1833 * allocation policy to ensure that all
1834 * gang members reside on the same vdev.
1838 needs_io
= vdev_dtl_contains(vd
, DTL_PARTIAL
,
1844 if (needs_io
&& !zfs_no_scrub_io
) {
1845 vdev_t
*rvd
= spa
->spa_root_vdev
;
1846 uint64_t maxinflight
= rvd
->vdev_children
* zfs_top_maxinflight
;
1848 mutex_enter(&spa
->spa_scrub_lock
);
1849 while (spa
->spa_scrub_inflight
>= maxinflight
)
1850 cv_wait(&spa
->spa_scrub_io_cv
, &spa
->spa_scrub_lock
);
1851 spa
->spa_scrub_inflight
++;
1852 mutex_exit(&spa
->spa_scrub_lock
);
1855 * If we're seeing recent (zfs_scan_idle) "important" I/Os
1856 * then throttle our workload to limit the impact of a scan.
1858 if (ddi_get_lbolt64() - spa
->spa_last_io
<= zfs_scan_idle
)
1861 zio_nowait(zio_read(NULL
, spa
, bp
,
1862 abd_alloc_for_io(size
, B_FALSE
), size
, dsl_scan_scrub_done
,
1863 NULL
, ZIO_PRIORITY_SCRUB
, zio_flags
, zb
));
1866 /* do not relocate this block */
1870 /* Called by the ZFS_IOC_POOL_SCAN ioctl to start a scrub or resilver */
1872 dsl_scan(dsl_pool_t
*dp
, pool_scan_func_t func
)
1874 spa_t
*spa
= dp
->dp_spa
;
1877 * Purge all vdev caches and probe all devices. We do this here
1878 * rather than in sync context because this requires a writer lock
1879 * on the spa_config lock, which we can't do from sync context. The
1880 * spa_scrub_reopen flag indicates that vdev_open() should not
1881 * attempt to start another scrub.
1883 spa_vdev_state_enter(spa
, SCL_NONE
);
1884 spa
->spa_scrub_reopen
= B_TRUE
;
1885 vdev_reopen(spa
->spa_root_vdev
);
1886 spa
->spa_scrub_reopen
= B_FALSE
;
1887 (void) spa_vdev_state_exit(spa
, NULL
, 0);
1889 return (dsl_sync_task(spa_name(spa
), dsl_scan_setup_check
,
1890 dsl_scan_setup_sync
, &func
, 0, ZFS_SPACE_CHECK_NONE
));
1894 dsl_scan_restarting(dsl_scan_t
*scn
, dmu_tx_t
*tx
)
1896 return (scn
->scn_restart_txg
!= 0 &&
1897 scn
->scn_restart_txg
<= tx
->tx_txg
);