vis.h

   1 #ifndef VIS_H
   2 #define VIS_H
   3
   4 #include <signal.h>
   5 #include <stddef.h>
   6 #include <stdbool.h>
   7
   8 typedef struct Vis Vis;
   9 typedef struct File File;
  10 typedef struct Win Win;
  11
  12 #include "ui.h"
  13 #include "view.h"
  14 #include "text-regex.h"
  15 #include "libutf.h"
  16
  17 #ifndef CONFIG_HELP
  18 #define CONFIG_HELP 1
  19 #endif
  20
  21 #if CONFIG_HELP
  22 #define VIS_HELP_DECL(x) x
  23 #define VIS_HELP_USE(x) x
  24 #define VIS_HELP(x) (x),
  25 #else
  26 #define VIS_HELP_DECL(x)
  27 #define VIS_HELP_USE(x) NULL
  28 #define VIS_HELP(x)
  29 #endif
  30
  31 /* simplify utility renames by distribution packagers */
  32 #ifndef VIS_OPEN
  33 #define VIS_OPEN "vis-open"
  34 #endif
  35 #ifndef VIS_CLIPBOARD
  36 #define VIS_CLIPBOARD "vis-clipboard"
  37 #endif
  38
  39 /* maximum bytes needed for string representation of a (pseudo) key */
  40 #define VIS_KEY_LENGTH_MAX 64
  41
  42 /**
  43  * Editor event handlers.
  44  */
  45 typedef struct {
  46         void (*init)(Vis*);
  47         void (*start)(Vis*);
  48         void (*quit)(Vis*);
  49         void (*mode_insert_input)(Vis*, const char *key, size_t len);
  50         void (*mode_replace_input)(Vis*, const char *key, size_t len);
  51         void (*file_open)(Vis*, File*);
  52         bool (*file_save_pre)(Vis*, File*, const char *path);
  53         void (*file_save_post)(Vis*, File*, const char *path);
  54         void (*file_close)(Vis*, File*);
  55         void (*win_open)(Vis*, Win*);
  56         void (*win_close)(Vis*, Win*);
  57         void (*win_highlight)(Vis*, Win*);
  58         void (*win_status)(Vis*, Win*);
  59 } VisEvent;
  60
  61 /** Union used to pass arguments to key action functions. */
  62 typedef union {
  63         bool b;
  64         int i;
  65         const char *s;
  66         const void *v;
  67         void (*w)(View*);
  68         void (*f)(Vis*);
  69 } Arg;
  70
  71 /**
  72  * Key action handling function.
  73  * @param keys Input queue content *after* the binding which invoked this function.
  74  * @rst
  75  * .. note:: An empty string ``""`` indicates that no further input is available.
  76  * @endrst
  77  * @return Pointer to first non-cosumed key.
  78  * @rst
  79  * .. warning:: Must be in range ``[keys, keys+strlen(keys)]`` or ``NULL`` to
  80  *              indicate that not enough input was available. In the latter case
  81  *              the function will be called again once more input has been received.
  82  * @endrst
  83  * @ingroup vis_action
  84  */
  85 typedef const char *KeyActionFunction(Vis*, const char *keys, const Arg*);
  86
  87 /** Key action definition. */
  88 typedef struct {
  89         const char *name;                /**< Name of a pseudo key ``<name>`` which can be used in mappings. */
  90         VIS_HELP_DECL(const char *help;) /**< One line human readable description, displayed by ``:help``. */
  91         KeyActionFunction *func;         /**< Key action implementation function. */
  92         Arg arg;                         /**< Options passes as last argument to ``func``. */
  93 } KeyAction;
  94
  95 /**
  96  * A key binding, refers to an action or an alias
  97  * @rst
  98  * .. note:: Either ``action`` or ``alias`` must be ``NULL``.
  99  * @endrst
 100  */
 101 typedef struct {
 102         const char *key;         /**< Symbolic key to trigger this binding. */
 103         const KeyAction *action; /**< Action to invoke when triggering this binding. */
 104         const char *alias;       /**< Replaces ``key`` with ``alias`` at the front of the input queue. */
 105 } KeyBinding;
 106
 107 /**
 108  * @defgroup vis_lifecycle
 109  * @{
 110  */
 111 /** Create a new editor instance using the given user interface and event handlers. */
 112 Vis *vis_new(Ui*, VisEvent*);
 113 /** Free all resources associated with this editor instance, terminates UI. */
 114 void vis_free(Vis*);
 115 /**
 116  * Enter main loop, start processing user input.
 117  * @return The editor exit status code.
 118  */
 119 int vis_run(Vis*);
 120 /** Terminate editing session, the given ``status`` will be the return value of `vis_run`. */
 121 void vis_exit(Vis*, int status);
 122 /**
 123  * Emergency exit, print given message, perform minimal UI cleanup and exit process.
 124  * @rst
 125  * .. note:: This function does not return.
 126  * @endrst
 127  */
 128 void vis_die(Vis*, const char *msg, ...) __attribute__((noreturn,format(printf, 2, 3)));
 129
 130 /**
 131  * Temporarily supsend the editor process.
 132  * @rst
 133  * .. note:: This function will generate a ``SIGTSTP`` signal.
 134  * @endrst
 135  **/
 136 void vis_suspend(Vis*);
 137 /**
 138  * Resume editor process.
 139  * @rst
 140  * .. note:: This function is usually called in response to a ``SIGCONT`` signal.
 141  * @endrst
 142  */
 143 void vis_resume(Vis*);
 144 /**
 145  * Inform the editor core that a signal occured.
 146  * @return Whether the signal was handled.
 147  * @rst
 148  * .. note:: Being designed as a library the editor core does *not* register any
 149  *           signal handlers on its own.
 150  * .. note:: The remaining arguments match the prototype of ``sa_sigaction`` as
 151  *           specified in `sigaction(2)`.
 152  * @endrst
 153  */
 154 bool vis_signal_handler(Vis*, int signum, const siginfo_t *siginfo, const void *context);
 155 /**
 156  * Interrupt long running operation.
 157  * @rst
 158  * .. warning:: There is no guarantee that a long running operation is actually
 159  *              interrupted. It is analogous to cooperative multitasking where
 160  *              the operation has to voluntarily yield control.
 161  * .. note:: It is invoked from `vis_signal_handler` when receiving ``SIGINT``.
 162  * @endrst
 163  */
 164 void vis_interrupt(Vis*);
 165 /** Check whether interruption was requested. */
 166 bool vis_interrupt_requested(Vis*);
 167 /**
 168  * @}
 169  * @defgroup vis_draw
 170  * @{
 171  */
 172 /** Draw user interface. */
 173 void vis_draw(Vis*);
 174 /** Completely redraw user interface. */
 175 void vis_redraw(Vis*);
 176 /** Blit user interface state to output device. */
 177 void vis_update(Vis*);
 178 /**
 179  * @}
 180  * @defgroup vis_windows
 181  * @{
 182  */
 183 /**
 184  * Create a new window and load the given file.
 185  * @param filename If ``NULL`` a unamed, empty buffer is created.
 186  * @rst
 187  * .. note:: If the given file name is already opened in another window,
 188  *           the underlying File object is shared.
 189  * .. warning:: This duplication detection is currently based on normalized,
 190  *              absolute file names. TODO: compare inodes instead.
 191  * @endrst
 192  */
 193 bool vis_window_new(Vis*, const char *filename);
 194 /**
 195  * Create a new window associated with a file descriptor.
 196  * @rst
 197  * .. note:: No data is read from `fd`, but write commands without an
 198  *           explicit filename will instead write to the file descriptor.
 199  * @endrst
 200  */
 201 bool vis_window_new_fd(Vis*, int fd);
 202 /** Reload the file currently displayed in the window from disk. */
 203 bool vis_window_reload(Win*);
 204 /** Check whether closing the window would loose unsaved changes. */
 205 bool vis_window_closable(Win*);
 206 /** Close window, redraw user interface. */
 207 void vis_window_close(Win*);
 208 /** Split the window, shares the underlying file object. */
 209 bool vis_window_split(Win*);
 210 /** Change status message of this window. */
 211 void vis_window_status(Win*, const char *status);
 212 void vis_window_draw(Win*);
 213 void vis_window_invalidate(Win*);
 214 /** Focus next window. */
 215 void vis_window_next(Vis*);
 216 /** Focus previous window. */
 217 void vis_window_prev(Vis*);
 218 /** Change currently focused window, receiving user input. */
 219 void vis_window_focus(Win*);
 220 /** Swap location of two windows. */
 221 void vis_window_swap(Win*, Win*);
 222 /** Query window dimension. */
 223 int vis_window_width_get(const Win*);
 224 /** Query window dimension. */
 225 int vis_window_height_get(const Win*);
 226 /**
 227  * @}
 228  * @defgroup vis_info
 229  * @{
 230  */
 231 /**
 232  * Display a user prompt with a certain title.
 233  * @rst
 234  * .. note:: The prompt is currently implemented as a single line height window.
 235  * @endrst
 236  */
 237 void vis_prompt_show(Vis*, const char *title);
 238
 239 /**
 240  * Display a single line message.
 241  * @rst
 242  * .. note:: The message will automatically be hidden upon next input.
 243  * @endrst
 244  */
 245 void vis_info_show(Vis*, const char *msg, ...) __attribute__((format(printf, 2, 3)));
 246 /** Hide informational message. */
 247 void vis_info_hide(Vis*);
 248
 249 /** Display arbitrary long message in a dedicated window. */
 250 void vis_message_show(Vis*, const char *msg);
 251 /** Close message window. */
 252 void vis_message_hide(Vis*);
 253 /**
 254  * @}
 255  * @defgroup vis_changes
 256  * @{
 257  */
 258 void vis_insert(Vis*, size_t pos, const char *data, size_t len);
 259 void vis_delete(Vis*, size_t pos, size_t len);
 260 void vis_replace(Vis*, size_t pos, const char *data, size_t len);
 261 /** Perform insertion at all cursor positions. */
 262 void vis_insert_key(Vis*, const char *data, size_t len);
 263 /**
 264  * Perform character subsitution at all cursor positions.
 265  * @rst
 266  * .. note:: Does not replace new line characters.
 267  * @endrst
 268  */
 269 void vis_replace_key(Vis*, const char *data, size_t len);
 270 /**
 271  * Insert a tab at all cursor positions.
 272  * @rst
 273  * .. note:: Performs tab expansion according to current settings.
 274  * @endrst
 275  */
 276 void vis_insert_tab(Vis*);
 277 /**
 278  * Inserts a new line character at every cursor position.
 279  * @rst
 280  * .. note:: Performs auto indentation according to current settings.
 281  * @endrst
 282  */
 283 void vis_insert_nl(Vis*);
 284
 285 /** @} */
 286 /** Mode specifiers. */
 287 enum VisMode {
 288         VIS_MODE_NORMAL,
 289         VIS_MODE_OPERATOR_PENDING,
 290         VIS_MODE_VISUAL,
 291         VIS_MODE_VISUAL_LINE, /**< Sub mode of `VIS_MODE_VISUAL`. */
 292         VIS_MODE_INSERT,
 293         VIS_MODE_REPLACE, /**< Sub mode of `VIS_MODE_INSERT`. */
 294         VIS_MODE_INVALID,
 295 };
 296
 297 /**
 298  * @defgroup vis_modes
 299  * @{
 300  */
 301 /**
 302  * Switch mode.
 303  * @rst
 304  * .. note:: Will first trigger the leave event of the currently active
 305  *           mode, followed by an enter event of the new mode.
 306  *           No events are emitted, if the specified mode is already active.
 307  * @endrst
 308  */
 309 void vis_mode_switch(Vis*, enum VisMode);
 310 /** Get currently active mode. */
 311 enum VisMode vis_mode_get(Vis*);
 312 /** Translate human readable mode name to constant. */
 313 enum VisMode vis_mode_from(Vis*, const char *name);
 314
 315 /**
 316  * @}
 317  * @defgroup vis_keybind
 318  * @{
 319  */
 320 KeyBinding *vis_binding_new(Vis*);
 321 void vis_binding_free(Vis*, KeyBinding*);
 322
 323 /**
 324  * Set up a key binding.
 325  * @param force Whether an existing mapping should be discarded.
 326  * @param key The symbolic key to map.
 327  * @param binding The binding to map.
 328  * @rst
 329  * .. note:: ``binding->key`` is always ignored in favor of ``key``.
 330  * @endrst
 331  */
 332 bool vis_mode_map(Vis*, enum VisMode, bool force, const char *key, const KeyBinding*);
 333 /** Analogous to `vis_mode_map`, but window specific. */
 334 bool vis_window_mode_map(Win*, enum VisMode, bool force, const char *key, const KeyBinding*);
 335 /** Unmap a symbolic key in a given mode. */
 336 bool vis_mode_unmap(Vis*, enum VisMode, const char *key);
 337 /** Analogous to `vis_mode_unmap`, but window specific. */
 338 bool vis_window_mode_unmap(Win*, enum VisMode, const char *key);
 339 /**
 340  * @}
 341  * @defgroup vis_action
 342  * @{
 343  */
 344 /**
 345  * Create new key action.
 346  * @param name The name to be used as symbolic key when registering.
 347  * @param help Optional single line help text.
 348  * @param func The function implementing the key action logic.
 349  * @param arg Argument passed to function.
 350  */
 351 KeyAction *vis_action_new(Vis*, const char *name, const char *help, KeyActionFunction*, Arg);
 352 void vis_action_free(Vis*, KeyAction*);
 353 /**
 354  * Register key action.
 355  * @rst
 356  * .. note:: Makes the key action available under the pseudo key name specified
 357  *           in ``keyaction->name``.
 358  * @endrst
 359  */
 360 bool vis_action_register(Vis*, const KeyAction*);
 361
 362 /**
 363  * @}
 364  * @defgroup vis_keymap
 365  * @{
 366  */
 367
 368 /** Add a key translation. */
 369 bool vis_keymap_add(Vis*, const char *key, const char *mapping);
 370 /** Temporarily disable the keymap for the next key press. */
 371 void vis_keymap_disable(Vis*);
 372
 373 /** @} */
 374 /** Operator specifiers. */
 375 enum VisOperator {
 376         VIS_OP_DELETE,
 377         VIS_OP_CHANGE,
 378         VIS_OP_YANK,
 379         VIS_OP_PUT_AFTER,
 380         VIS_OP_SHIFT_RIGHT,
 381         VIS_OP_SHIFT_LEFT,
 382         VIS_OP_JOIN,
 383         VIS_OP_MODESWITCH,
 384         VIS_OP_REPLACE,
 385         VIS_OP_CURSOR_SOL,
 386         VIS_OP_CASE_SWAP,
 387         VIS_OP_FILTER,
 388         VIS_OP_INVALID, /* denotes the end of the "real" operators */
 389         /* pseudo operators: keep them at the end to save space in array definition */
 390         VIS_OP_CASE_LOWER,
 391         VIS_OP_CASE_UPPER,
 392         VIS_OP_CURSOR_EOL,
 393         VIS_OP_PUT_AFTER_END,
 394         VIS_OP_PUT_BEFORE,
 395         VIS_OP_PUT_BEFORE_END,
 396         VIS_OP_LAST, /* has to be last enum member */
 397 };
 398
 399 /**
 400  * @defgroup vis_operators
 401  * @{
 402  */
 403 typedef struct OperatorContext OperatorContext;
 404
 405 /**
 406  * An operator performs a certain function on a given text range.
 407  * @rst
 408  * .. note:: The operator must return the new cursor position or ``EPOS`` if
 409  *           the cursor should be disposed.
 410  * .. note:: The last used operator can be repeated using `vis_repeat`.
 411  * @endrst
 412  */
 413 typedef size_t (VisOperatorFunction)(Vis*, Text*, OperatorContext*);
 414
 415 /**
 416  * Register an operator.
 417  * @return Operator ID. Negative values indicate an error, positive ones can be
 418  *         used with `vis_operator`.
 419  */
 420 int vis_operator_register(Vis*, VisOperatorFunction*, void *context);
 421
 422 /**
 423  * Set operator to execute.
 424  *
 425  * Has immediate effect if:
 426  *  - A visual mode is active.
 427  *  - The same operator was already set (range will be the current line).
 428  *
 429  * Otherwise the operator will be executed on the range determinded by:
 430  *  - A motion (see `vis_motion`).
 431  *  - A text object (`vis_textobject`).
 432  *
 433  * The expected varying arguments are:
 434  *
 435  *  - `VIS_OP_FILTER`     a char pointer referring to the command to run.
 436  *  - `VIS_OP_JOIN`       a char pointer referring to the text to insert between lines.
 437  *  - `VIS_OP_MODESWITCH` an ``enum VisMode`` indicating the mode to switch to.
 438  *  - `VIS_OP_REPLACE`    a char pointer reffering to the replacement character.
 439  */
 440 bool vis_operator(Vis*, enum VisOperator, ...);
 441
 442 /** Repeat last operator, possibly with a new count if one was provided in the meantime. */
 443 void vis_repeat(Vis*);
 444
 445 /** Cancel pending operator, reset count, motion, text object, register etc. */
 446 void vis_cancel(Vis*);
 447
 448 /** @} */
 449 /** Motion specifiers. */
 450 enum VisMotion {
 451         VIS_MOVE_LINE_DOWN,
 452         VIS_MOVE_LINE_UP,
 453         VIS_MOVE_SCREEN_LINE_UP,
 454         VIS_MOVE_SCREEN_LINE_DOWN,
 455         VIS_MOVE_SCREEN_LINE_BEGIN,
 456         VIS_MOVE_SCREEN_LINE_MIDDLE,
 457         VIS_MOVE_SCREEN_LINE_END,
 458         VIS_MOVE_LINE_PREV,
 459         VIS_MOVE_LINE_BEGIN,
 460         VIS_MOVE_LINE_START,
 461         VIS_MOVE_LINE_FINISH,
 462         VIS_MOVE_LINE_LASTCHAR,
 463         VIS_MOVE_LINE_END,
 464         VIS_MOVE_LINE_NEXT,
 465         VIS_MOVE_LINE,
 466         VIS_MOVE_COLUMN,
 467         VIS_MOVE_CHAR_PREV,
 468         VIS_MOVE_CHAR_NEXT,
 469         VIS_MOVE_LINE_CHAR_PREV,
 470         VIS_MOVE_LINE_CHAR_NEXT,
 471         VIS_MOVE_CODEPOINT_PREV,
 472         VIS_MOVE_CODEPOINT_NEXT,
 473         VIS_MOVE_WORD_NEXT,
 474         VIS_MOVE_WORD_START_NEXT,
 475         VIS_MOVE_WORD_END_PREV,
 476         VIS_MOVE_WORD_END_NEXT,
 477         VIS_MOVE_WORD_START_PREV,
 478         VIS_MOVE_LONGWORD_NEXT,
 479         VIS_MOVE_LONGWORD_START_PREV,
 480         VIS_MOVE_LONGWORD_START_NEXT,
 481         VIS_MOVE_LONGWORD_END_PREV,
 482         VIS_MOVE_LONGWORD_END_NEXT,
 483         VIS_MOVE_SENTENCE_PREV,
 484         VIS_MOVE_SENTENCE_NEXT,
 485         VIS_MOVE_PARAGRAPH_PREV,
 486         VIS_MOVE_PARAGRAPH_NEXT,
 487         VIS_MOVE_FUNCTION_START_PREV,
 488         VIS_MOVE_FUNCTION_START_NEXT,
 489         VIS_MOVE_FUNCTION_END_PREV,
 490         VIS_MOVE_FUNCTION_END_NEXT,
 491         VIS_MOVE_BLOCK_START,
 492         VIS_MOVE_BLOCK_END,
 493         VIS_MOVE_PARENTHESE_START,
 494         VIS_MOVE_PARENTHESE_END,
 495         VIS_MOVE_BRACKET_MATCH,
 496         VIS_MOVE_LEFT_TO,
 497         VIS_MOVE_RIGHT_TO,
 498         VIS_MOVE_LEFT_TILL,
 499         VIS_MOVE_RIGHT_TILL,
 500         VIS_MOVE_FILE_BEGIN,
 501         VIS_MOVE_FILE_END,
 502         VIS_MOVE_MARK,
 503         VIS_MOVE_MARK_LINE,
 504         VIS_MOVE_SEARCH_WORD_FORWARD,
 505         VIS_MOVE_SEARCH_WORD_BACKWARD,
 506         VIS_MOVE_SEARCH_REPEAT_FORWARD,
 507         VIS_MOVE_SEARCH_REPEAT_BACKWARD,
 508         VIS_MOVE_WINDOW_LINE_TOP,
 509         VIS_MOVE_WINDOW_LINE_MIDDLE,
 510         VIS_MOVE_WINDOW_LINE_BOTTOM,
 511         VIS_MOVE_CHANGELIST_NEXT,
 512         VIS_MOVE_CHANGELIST_PREV,
 513         VIS_MOVE_JUMPLIST_NEXT,
 514         VIS_MOVE_JUMPLIST_PREV,
 515         VIS_MOVE_NOP,
 516         VIS_MOVE_PERCENT,
 517         VIS_MOVE_BYTE,
 518         VIS_MOVE_BYTE_LEFT,
 519         VIS_MOVE_BYTE_RIGHT,
 520         VIS_MOVE_INVALID, /* denotes the end of the "real" motions */
 521         /* pseudo motions: keep them at the end to save space in array definition */
 522         VIS_MOVE_TOTILL_REPEAT,
 523         VIS_MOVE_TOTILL_REVERSE,
 524         VIS_MOVE_SEARCH_FORWARD,
 525         VIS_MOVE_SEARCH_BACKWARD,
 526         VIS_MOVE_SEARCH_REPEAT,
 527         VIS_MOVE_SEARCH_REPEAT_REVERSE,
 528         VIS_MOVE_LAST, /* denotes the end of all motions */
 529 };
 530
 531 /**
 532  * @defgroup vis_motions
 533  * @{
 534  */
 535 /**
 536  * Set motion to perform.
 537  *
 538  * The following motions take an additional argument:
 539  *
 540  *  - `VIS_MOVE_SEARCH_FORWARD` and `VIS_MOVE_SEARCH_BACKWARD`
 541  *
 542  *     The search pattern as ``const char *``.
 543  *
 544  *  - ``VIS_MOVE_{LEFT,RIGHT}_{TO,TILL}``
 545  *
 546  *     The character to search for as ``const char *``.
 547  *
 548  *  - `VIS_MOVE_MARK` and `VIS_MOVE_MARK_LINE`
 549  *
 550  *     A valid ``enum VisMark``.
 551  */
 552 bool vis_motion(Vis*, enum VisMotion, ...);
 553
 554 enum VisMotionType {
 555         VIS_MOTIONTYPE_LINEWISE  = 1 << 0,
 556         VIS_MOTIONTYPE_CHARWISE  = 1 << 1,
 557 };
 558
 559 /** Force currently specified motion to behave in line or character wise mode. */
 560 void vis_motion_type(Vis *vis, enum VisMotionType);
 561
 562 /**
 563  * Motions take a starting position and transform it to an end position.
 564  * @rst
 565  * .. note:: Should a motion not be possible, the original position must be returned.
 566  *           TODO: we might want to change that to ``EPOS``?
 567  * @endrst
 568  */
 569 typedef size_t (VisMotionFunction)(Vis*, Win*, void *context, size_t pos);
 570
 571 /**
 572  * Register a motion function.
 573  * @return Motion ID. Negative values indicate an error, positive ones can be
 574  *         used with `vis_motion`.
 575  */
 576 int vis_motion_register(Vis*, enum VisMotionType, void *context, VisMotionFunction*);
 577
 578 /**
 579  * @}
 580  * @defgroup vis_count
 581  * @{
 582  */
 583 /** No count was specified. */
 584 #define VIS_COUNT_UNKNOWN (-1)
 585 /** Get count, might return `VIS_COUNT_UNKNOWN`. */
 586 int vis_count_get(Vis*);
 587 /** Get count, if none was specified, return ``def``. */
 588 int vis_count_get_default(Vis*, int def);
 589 /** Set a count. */
 590 void vis_count_set(Vis*, int count);
 591
 592 typedef struct {
 593         Vis *vis;
 594         int iteration;
 595         int count;
 596 } VisCountIterator;
 597
 598 /** Get iterator initialized with current count or ``def`` if not specified. */
 599 VisCountIterator vis_count_iterator_get(Vis*, int def);
 600 /** Get iterator initialized with a count value. */
 601 VisCountIterator vis_count_iterator_init(Vis*, int count);
 602 /**
 603  * Increment iterator counter.
 604  * @return Whether iteration should continue.
 605  * @rst
 606  * .. note:: Terminates iteration if the edtior was
 607  *           `interrupted <vis_interrupt>`_ in the meantime.
 608  * @endrst
 609  */
 610 bool vis_count_iterator_next(VisCountIterator*);
 611
 612 /** @} */
 613 /** Text object specifier. */
 614 enum VisTextObject {
 615         VIS_TEXTOBJECT_INNER_WORD,
 616         VIS_TEXTOBJECT_OUTER_WORD,
 617         VIS_TEXTOBJECT_INNER_LONGWORD,
 618         VIS_TEXTOBJECT_OUTER_LONGWORD,
 619         VIS_TEXTOBJECT_SENTENCE,
 620         VIS_TEXTOBJECT_PARAGRAPH,
 621         VIS_TEXTOBJECT_OUTER_SQUARE_BRACKET,
 622         VIS_TEXTOBJECT_INNER_SQUARE_BRACKET,
 623         VIS_TEXTOBJECT_OUTER_CURLY_BRACKET,
 624         VIS_TEXTOBJECT_INNER_CURLY_BRACKET,
 625         VIS_TEXTOBJECT_OUTER_ANGLE_BRACKET,
 626         VIS_TEXTOBJECT_INNER_ANGLE_BRACKET,
 627         VIS_TEXTOBJECT_OUTER_PARANTHESE,
 628         VIS_TEXTOBJECT_INNER_PARANTHESE,
 629         VIS_TEXTOBJECT_OUTER_QUOTE,
 630         VIS_TEXTOBJECT_INNER_QUOTE,
 631         VIS_TEXTOBJECT_OUTER_SINGLE_QUOTE,
 632         VIS_TEXTOBJECT_INNER_SINGLE_QUOTE,
 633         VIS_TEXTOBJECT_OUTER_BACKTICK,
 634         VIS_TEXTOBJECT_INNER_BACKTICK,
 635         VIS_TEXTOBJECT_OUTER_ENTIRE,
 636         VIS_TEXTOBJECT_INNER_ENTIRE,
 637         VIS_TEXTOBJECT_OUTER_LINE,
 638         VIS_TEXTOBJECT_INNER_LINE,
 639         VIS_TEXTOBJECT_INDENTATION,
 640         VIS_TEXTOBJECT_SEARCH_FORWARD,
 641         VIS_TEXTOBJECT_SEARCH_BACKWARD,
 642         VIS_TEXTOBJECT_INVALID,
 643 };
 644
 645 /**
 646  * @defgroup vis_textobjs
 647  * @{
 648  */
 649
 650 /**
 651  * Text objects take a starting position and return a text range.
 652  * @rst
 653  * .. note:: The originating position does not necessarily have to be contained in
 654  *           the resulting range.
 655  * @endrst
 656  */
 657 typedef Filerange (VisTextObjectFunction)(Vis*, Win*, void *context, size_t pos);
 658
 659 /**
 660  * Register a new text object.
 661  * @return Text object ID. Negative values indicate an error, positive ones can be
 662  *         used with `vis_textobject`.
 663  */
 664 int vis_textobject_register(Vis*, int type, void *data, VisTextObjectFunction*);
 665
 666 /** Set text object to use. */
 667 bool vis_textobject(Vis*, enum VisTextObject);
 668
 669 /** @} */
 670 /** Mark specifiers. */
 671 enum VisMark {
 672         VIS_MARK_SELECTION_START, /* '< */
 673         VIS_MARK_SELECTION_END,   /* '> */
 674         VIS_MARK_a, VIS_MARK_b, VIS_MARK_c, VIS_MARK_d, VIS_MARK_e,
 675         VIS_MARK_f, VIS_MARK_g, VIS_MARK_h, VIS_MARK_i, VIS_MARK_j,
 676         VIS_MARK_k, VIS_MARK_l, VIS_MARK_m, VIS_MARK_n, VIS_MARK_o,
 677         VIS_MARK_p, VIS_MARK_q, VIS_MARK_r, VIS_MARK_s, VIS_MARK_t,
 678         VIS_MARK_u, VIS_MARK_v, VIS_MARK_w, VIS_MARK_x, VIS_MARK_y,
 679         VIS_MARK_z,
 680         VIS_MARK_INVALID,     /* has to be the last enum member */
 681 };
 682
 683 /**
 684  * @}
 685  * @defgroup vis_marks
 686  * @{
 687  */
 688 /** Translate single character mark name to corresponding constant. */
 689 enum VisMark vis_mark_from(Vis*, char mark);
 690 /**
 691  * Set a mark.
 692  * @rst
 693  * .. note:: The same semantics as for `text_mark_set` apply.
 694  * @endrst
 695  */
 696 void vis_mark_set(Vis*, enum VisMark mark, size_t pos);
 697
 698 /** @} */
 699 /** Register specifiers. */
 700 enum VisRegister {
 701         VIS_REG_DEFAULT,    /* used when no other register is specified */
 702         VIS_REG_ZERO,       /* yank register */
 703         VIS_REG_AMPERSAND,  /* last regex match */
 704         VIS_REG_1,          /* 1-9 last sub-expression matches */
 705         VIS_REG_2,
 706         VIS_REG_3,
 707         VIS_REG_4,
 708         VIS_REG_5,
 709         VIS_REG_6,
 710         VIS_REG_7,
 711         VIS_REG_8,
 712         VIS_REG_9,
 713         VIS_REG_BLACKHOLE,  /* /dev/null register */
 714         VIS_REG_CLIPBOARD,  /* system clipboard register */
 715         VIS_REG_DOT,        /* last inserted text, copy of VIS_MACRO_OPERATOR */
 716         VIS_REG_SEARCH,     /* last used search pattern "/ */
 717         VIS_REG_COMMAND,    /* last used :-command ": */
 718         VIS_REG_SHELL,      /* last used shell command given to either <, >, |, or ! */
 719         VIS_REG_NUMBER,     /* cursor number */
 720         VIS_REG_a, VIS_REG_b, VIS_REG_c, VIS_REG_d, VIS_REG_e,
 721         VIS_REG_f, VIS_REG_g, VIS_REG_h, VIS_REG_i, VIS_REG_j,
 722         VIS_REG_k, VIS_REG_l, VIS_REG_m, VIS_REG_n, VIS_REG_o,
 723         VIS_REG_p, VIS_REG_q, VIS_REG_r, VIS_REG_s, VIS_REG_t,
 724         VIS_REG_u, VIS_REG_v, VIS_REG_w, VIS_REG_x, VIS_REG_y,
 725         VIS_REG_z,
 726         VIS_MACRO_OPERATOR, /* records entered keys after an operator */
 727         VIS_REG_PROMPT, /* internal register which shadows DEFAULT in PROMPT mode */
 728         VIS_REG_INVALID, /* has to be the last 'real' register */
 729         VIS_REG_A, VIS_REG_B, VIS_REG_C, VIS_REG_D, VIS_REG_E,
 730         VIS_REG_F, VIS_REG_G, VIS_REG_H, VIS_REG_I, VIS_REG_J,
 731         VIS_REG_K, VIS_REG_L, VIS_REG_M, VIS_REG_N, VIS_REG_O,
 732         VIS_REG_P, VIS_REG_Q, VIS_REG_R, VIS_REG_S, VIS_REG_T,
 733         VIS_REG_U, VIS_REG_V, VIS_REG_W, VIS_REG_X, VIS_REG_Y,
 734         VIS_REG_Z,
 735         VIS_MACRO_LAST_RECORDED, /* pseudo macro referring to last recorded one */
 736 };
 737
 738 /**
 739  * @defgroup vis_registers
 740  * @{
 741  */
 742 /** Translate single character register name to corresponding constant. */
 743 enum VisRegister vis_register_from(Vis*, char reg);
 744 /**
 745  * Specify register to use.
 746  * @rst
 747  * .. note:: If none is specified `VIS_REG_DEFAULT` will be used.
 748  * @endrst
 749  */
 750 void vis_register(Vis*, enum VisRegister);
 751 /** Get register content. */
 752 const char *vis_register_get(Vis*, enum VisRegister, size_t *len);
 753 const char *vis_register_slot_get(Vis*, enum VisRegister, size_t slot, size_t *len);
 754 /** Set register content. */
 755 bool vis_register_put(Vis*, enum VisRegister, const char *data, size_t len);
 756 bool vis_register_slot_put(Vis*, enum VisRegister, size_t slot, const char *data, size_t len);
 757 /**
 758  * @}
 759  * @defgroup vis_macros
 760  * @{
 761  */
 762 /**
 763  * Start recording a macro.
 764  * @rst
 765  * .. note:: Fails if a recording is already ongoing.
 766  * @endrst
 767  */
 768 bool vis_macro_record(Vis*, enum VisRegister);
 769 /** Stop recording, fails if there is nothing to stop. */
 770 bool vis_macro_record_stop(Vis*);
 771 /** Check whether a recording is currently ongoing. */
 772 bool vis_macro_recording(Vis*);
 773 /**
 774  * Replay a macro.
 775  * @rst
 776  * .. note:: A macro currently being recorded can not be replayed.
 777  * @endrst
 778  */
 779 bool vis_macro_replay(Vis*, enum VisRegister);
 780
 781 /**
 782  * @}
 783  * @defgroup vis_cmds
 784  * @{
 785  */
 786
 787 /** Execute a ``:``-command. */
 788 bool vis_cmd(Vis*, const char *cmd);
 789
 790 /** Command handler function. */
 791 typedef bool (VisCommandFunction)(Vis*, Win*, void *data, bool force,
 792         const char *argv[], Selection*, Filerange*);
 793 /**
 794  * Register new ``:``-command.
 795  * @param name The command name.
 796  * @param help Optional single line help text.
 797  * @param context User supplied context pointer passed to the handler function.
 798  * @param func The function implementing the command logic.
 799  * @rst
 800  * .. note:: Any unique prefix of the command name will invoke the command.
 801  * @endrst
 802  */
 803 bool vis_cmd_register(Vis*, const char *name, const char *help, void *context, VisCommandFunction*);
 804
 805 /** Unregister ``:``-command. */
 806 bool vis_cmd_unregister(Vis*, const char *name);
 807
 808 /**
 809  * @}
 810  * @defgroup vis_options
 811  * @{
 812  */
 813 /** Option properties. */
 814 enum VisOption {
 815         VIS_OPTION_TYPE_BOOL = 1 << 0,
 816         VIS_OPTION_TYPE_STRING = 1 << 1,
 817         VIS_OPTION_TYPE_NUMBER = 1 << 2,
 818         VIS_OPTION_VALUE_OPTIONAL = 1 << 3,
 819         VIS_OPTION_NEED_WINDOW = 1 << 4,
 820 };
 821
 822 /**
 823  * Option handler function.
 824  * @param win The window to which option should apply, might be ``NULL``.
 825  * @param context User provided context pointer as given to `vis_option_register`.
 826  * @param force Whether the option was specfied with a bang ``!``.
 827  * @param name Name of option which was set.
 828  * @param arg The new option value.
 829  */
 830 typedef bool (VisOptionFunction)(Vis*, Win*, void *context, bool toggle,
 831                                  enum VisOption, const char *name, Arg *value);
 832
 833 /**
 834  * Register a new ``:set`` option.
 835  * @param names A ``NULL`` terminated array of option names.
 836  * @param option Option properties.
 837  * @param func The function handling the option.
 838  * @param context User supplied context pointer passed to the handler function.
 839  * @param help Optional single line help text.
 840  * @rst
 841  * .. note:: Fails if any of the given option names is already registered.
 842  * @endrst
 843  */
 844 bool vis_option_register(Vis*, const char *names[], enum VisOption,
 845                          VisOptionFunction*, void *context, const char *help);
 846 /**
 847  * Unregister an existing ``:set`` option.
 848  * @rst
 849  * .. note:: Also unregisters all aliases as given to `vis_option_register`.
 850  * @endrst
 851  */
 852 bool vis_option_unregister(Vis*, const char *name);
 853
 854 /** Execute any kind (``:``, ``?``, ``/``) of prompt command */
 855 bool vis_prompt_cmd(Vis*, const char *cmd);
 856
 857 /**
 858  * Pipe a given file range to an external process.
 859  *
 860  * If the range is invalid 'interactive' mode is enabled, meaning that
 861  * stdin and stderr are passed through the underlying command, stdout
 862  * points to vis' stderr.
 863  *
 864  * If ``argv`` contains only one non-NULL element the command is executed
 865  * through an intermediate shell (using ``/bin/sh -c argv[0]``) that is
 866  * argument expansion is performed by the shell. Otherwise the argument
 867  * list will be passed unmodified to ``execvp(argv[0], argv)``.
 868  *
 869  * If the ``read_stdout`` and ``read_stderr`` callbacks are non-NULL they
 870  * will be invoked when output from the forked process is available.
 871  *
 872  * @rst
 873  * .. warning:: The editor core is blocked until this function returns.
 874  * @endrst
 875  *
 876  * @return The exit status of the forked process.
 877  */
 878 int vis_pipe(Vis*, File*, Filerange*, const char *argv[],
 879         void *stdout_context, ssize_t (*read_stdout)(void *stdout_context, char *data, size_t len),
 880         void *stderr_context, ssize_t (*read_stderr)(void *stderr_context, char *data, size_t len));
 881
 882 /**
 883  * Pipe a Filerange to an external process, return its exit status and capture
 884  * everything that is written to stdout/stderr.
 885  * @param argv Argument list, must be ``NULL`` terminated.
 886  * @param out Data written to ``stdout``, will be ``NUL`` terminated.
 887  * @param err Data written to ``stderr``, will be ``NUL`` terminated.
 888  * @rst
 889  * .. warning:: The pointers stored in ``out`` and ``err`` need to be `free(3)`-ed
 890  *              by the caller.
 891  * @endrst
 892  */
 893 int vis_pipe_collect(Vis*, File*, Filerange*, const char *argv[], char **out, char **err);
 894
 895 /**
 896  * @}
 897  * @defgroup vis_keys
 898  * @{
 899  */
 900 /**
 901  * Advance to the start of the next symbolic key.
 902  *
 903  * Given the start of a symbolic key, returns a pointer to the start of the one
 904  * immediately following it.
 905  */
 906 const char *vis_keys_next(Vis*, const char *keys);
 907 /** Convert next symbolic key to an Unicode code point, returns ``-1`` for unknown keys. */
 908 long vis_keys_codepoint(Vis*, const char *keys);
 909 /**
 910  * Convert next symbolic key to a UTF-8 sequence.
 911  * @return Whether conversion was successful, if not ``utf8`` is left unmodified.
 912  * @rst
 913  * .. note:: Guarantees that ``utf8`` is NUL terminated on success.
 914  * @endrst
 915  */
 916 bool vis_keys_utf8(Vis*, const char *keys, char utf8[static UTFmax+1]);
 917 /** Process symbolic keys as if they were user originated input. */
 918 void vis_keys_feed(Vis*, const char *keys);
 919 /**
 920  * @}
 921  * @defgroup vis_misc
 922  * @{
 923  */
 924
 925 /**
 926  * Get a regex object matching pattern.
 927  * @param regex The regex pattern to compile, if ``NULL`` the most recently used
 928  *        one is substituted.
 929  * @return A Regex object or ``NULL`` in case of an error.
 930  * @rst
 931  * .. warning:: The caller must free the regex object using `text_regex_free`.
 932  * @endrst
 933  */
 934 Regex *vis_regex(Vis*, const char *pattern);
 935
 936 /**
 937  * Take an undo snaphost to which we can later revert to.
 938  * @rst
 939  * .. note:: Does nothing when invoked while replaying a macro.
 940  * @endrst
 941  */
 942 void vis_file_snapshot(Vis*, File*);
 943 /** @} */
 944
 945 /* TODO: expose proper API to iterate through files etc */
 946 Text *vis_text(Vis*);
 947 View *vis_view(Vis*);
 948 Win *vis_window(Vis*);
 949
 950 /* Get value of autoindent */
 951 bool vis_get_autoindent(const Vis*);
 952
 953 #endif