?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
regen pidl all: rm epan/dissectors/pidl/*-stamp; pushd epan/dissectors/pidl/ && make...
[wireshark-sm.git] / plugins / epan / gryphon / packet-gryphon.h
blob436cb134a624dd31bb26dc7f58ea065933671645
1 /* packet-gryphon.h
2 *
3 * Updated routines for Gryphon protocol packet dissection
4 * By Mark C. <markc@dgtech.com>
5 * Copyright (C) 2018 DG Technologies, Inc. (Dearborn Group, Inc.) USA
6 *
7 * Definitions for Gryphon packet disassembly structures and routines
8 * By Steve Limkemann <stevelim@dgtech.com>
9 * Copyright 1998 Steve Limkemann
10 *
11 * Wireshark - Network traffic analyzer
12 * By Gerald Combs <gerald@wireshark.org>
13 * Copyright 1998 Gerald Combs
14 *
15 * SPDX-License-Identifier: GPL-2.0-or-later
16 */
17
18 #define MSG_HDR_SZ 8
19 #define CMD_HDR_SZ 4
20
21 /* source/destinations: */
22
23 #define SD_CARD 0x01 /* (vehicle) network interface */
24 #define SD_SERVER 0x02
25 #define SD_CLIENT 0x03
26 #define SD_KNOWN 0x10 /* Client ID >= are well known */
27 #define SD_SCHED 0x10 /* scheduler */
28 #define SD_SCRIPT 0x20 /* script processor */
29 #define SD_PGM 0x21 /* Program loader */
30 #define SD_USDT 0x22 /* USDT (Unacknowledged Segmented Data Transfer) */
31 #define SD_BLM 0x23 /* Bus Load Monitoring */
32 #define SD_LIN 0x24 /* LIN extensions */
33 #define SD_FLIGHT 0x25 /* Flight Recorder */
34 #define SD_LOGGER 0x25 /* data logger */
35 #define SD_RESP 0x26 /* Message Response */
36 #define SD_IOPWR 0x27 /* VNG / Compact Gryphon I/O & power */
37 #define SD_UTIL 0x28 /* Miscellaneous utility commands */
38 #define SD_CNVT 0x29 /* signal conversion commands */
39 #define CH_BROADCAST 0xFF /* broadcast message destination channel */
40
41
42
43 /* frame types: */
44 #define GY_FT_CMD 0x01 /* command to initiate some action */
45 #define GY_FT_RESP 0x02 /* response to a command */
46 #define GY_FT_DATA 0x03 /* (vehicle) network data */
47 #define GY_FT_EVENT 0x04 /* notification of an event */
48 #define GY_FT_MISC 0x05 /* misc data */
49 #define GY_FT_TEXT 0x06 /* null-terminated ASCII strings */
50 #define GY_FT_SIG 0x07 /* (vehicle) network signals */
51
52
53
54 /* generic (all SD type) commands: values 0x00 to 0x3f */
55
56 #define CMD_INIT 0x01 /* initialize target */
57 #define CMD_GET_STAT 0x02 /* request status */
58 #define CMD_GET_CONFIG 0x03 /* request configuration info */
59 #define CMD_EVENT_ENABLE 0x04 /* Enable event type */
60 #define CMD_EVENT_DISABLE 0x05 /* Disable event type */
61 #define CMD_GET_TIME 0x06 /* Get current value of timestamp */
62 #define CMD_GET_RXDROP 0x07 /* Get count of Rx msgs dropped */
63 #define CMD_RESET_RXDROP 0x08 /* Set count of Rx msgs dropped to zero */
64 #define CMD_BCAST_ON 0x09 /* broadcasts on */
65 #define CMD_BCAST_OFF 0x0a /* broadcasts off */
66 #define CMD_SET_TIME 0x0b /* set time */
67
68 /* SD-type specific commands: should start at 0x40, global uniqueness */
69 /* is preferred, but not mandatory. */
70
71 /* SD_CARD command types: */
72
73 #define CMD_CARD_SET_SPEED (SD_CARD * 256 + 0x40) /* set peripheral speed */
74 #define CMD_CARD_GET_SPEED (SD_CARD * 256 + 0x41) /* get peripheral speed */
75 #define CMD_CARD_SET_FILTER (SD_CARD * 256 + 0x42) /* set filter to pass or block all */
76 #define CMD_CARD_GET_FILTER (SD_CARD * 256 + 0x43) /* get a pass/block filter */
77 #define CMD_CARD_TX (SD_CARD * 256 + 0x44) /* transmit message */
78 #define CMD_CARD_TX_LOOP_ON (SD_CARD * 256 + 0x45) /* set transmit loopback on */
79 #define CMD_CARD_TX_LOOP_OFF (SD_CARD * 256 + 0x46) /* set transmit loopback off */
80 #define CMD_CARD_IOCTL (SD_CARD * 256 + 0x47) /* device driver ioctl pass-through */
81 #define CMD_CARD_ADD_FILTER (SD_CARD * 256 + 0x48) /* add a pass/block filter */
82 #define CMD_CARD_MODIFY_FILTER (SD_CARD * 256 + 0x49) /* modify a pass/block filter */
83 #define CMD_CARD_GET_FILTER_HANDLES (SD_CARD * 256 + 0x4A)/* get a list of filters */
84 #define CMD_CARD_SET_DEFAULT_FILTER (SD_CARD * 256 + 0x4B)/* set the default action */
85 #define CMD_CARD_GET_DEFAULT_FILTER (SD_CARD * 256 + 0x4C)/* get the defautl action */
86 #define CMD_CARD_SET_FILTER_MODE (SD_CARD * 256 + 0x4D) /* set the client data mode */
87 #define CMD_CARD_GET_FILTER_MODE (SD_CARD * 256 + 0x4E) /* get the client data mode */
88 #define CMD_CARD_GET_EVNAMES (SD_CARD * 256 + 0x4f) /* get event names */
89 #define CMD_CARD_GET_SPEEDS (SD_CARD * 256 + 0x50) /* get speed definitions */
90
91 /* SD_SERVER command types: */
92
93 #define CMD_SERVER_REG (SD_SERVER * 256 + 0x50) /* register connection */
94 #define CMD_SERVER_SET_SORT (SD_SERVER * 256 + 0x51) /* set sorting behavior */
95 #define CMD_SERVER_SET_OPT (SD_SERVER * 256 + 0x52) /* set type of optimization */
96
97 /* SD_CLIENT command types: */
98
99 #define CMD_CLIENT_GET_ID (SD_CLIENT * 256 + 0x60) /* get the ID (channel field) of this client? */
100 #define CMD_CLIENT_SET_ID (SD_CLIENT * 256 + 0x61) /* set the ID (channel field) of this client? */
101 #define CMD_CLIENT_SHUTDOWN (SD_CLIENT * 256 + 0x62) /* tell client to die ? */
102
103 /* Bus load monitor (SD_BLM) commands: */
104
105 #define CMD_BLM_SET_MODE (SD_BLM * 256 + 0xA0)
106 #define CMD_BLM_GET_MODE (SD_BLM * 256 + 0xA1)
107 #define CMD_BLM_GET_DATA (SD_BLM * 256 + 0xA2)
108 #define CMD_BLM_GET_STATS (SD_BLM * 256 + 0xA3)
109
110 /* SD_LIN command types: */
111 #define CMD_LDF_DESC (SD_LIN * 256 + 0xB8) /* */
112 #define CMD_LDF_UPLOAD (SD_LIN * 256 + 0xB9) /* */
113 #define CMD_LDF_LIST (SD_LIN * 256 + 0xBA) /* */
114 #define CMD_LDF_DELETE (SD_LIN * 256 + 0xBB) /* */
115 #define CMD_LDF_PARSE (SD_LIN * 256 + 0xBC) /* */
116 #define CMD_GET_LDF_INFO (SD_LIN * 256 + 0xBD) /* */
117 #define CMD_GET_NODE_NAMES (SD_LIN * 256 + 0xBE) /* */
118 #define CMD_EMULATE_NODES (SD_LIN * 256 + 0xBF) /* */
119 #define CMD_GET_FRAMES (SD_LIN * 256 + 0xB0) /* */
120 #define CMD_GET_FRAME_INFO (SD_LIN * 256 + 0xC1) /* */
121 #define CMD_GET_SIGNAL_INFO (SD_LIN * 256 + 0xC2) /* */
122 #define CMD_GET_SIGNAL_DETAIL (SD_LIN * 256 + 0xC3) /* */
123 #define CMD_GET_ENCODING_INFO (SD_LIN * 256 + 0xC4) /* */
124 #define CMD_GET_SCHEDULES (SD_LIN * 256 + 0xC5) /* */
125 #define CMD_START_SCHEDULE (SD_LIN * 256 + 0xC6) /* */
126 #define CMD_STOP_SCHEDULE (SD_LIN * 256 + 0xC7) /* */
127 #define CMD_STORE_DATA (SD_LIN * 256 + 0xC8) /* */
128 #define CMD_SEND_ID (SD_LIN * 256 + 0xC9) /* */
129 #define CMD_SEND_ID_DATA (SD_LIN * 256 + 0xCA) /* */
130 #define CMD_SAVE_SESSION (SD_LIN * 256 + 0xCB) /* */
131 #define CMD_RESTORE_SESSION (SD_LIN * 256 + 0xCC) /* */
132 #define CMD_GET_NODE_SIGNALS (SD_LIN * 256 + 0xCD) /* */
133
134 /* signal conversion (SD_CNVT) commands */
135
136 #define CMD_CNVT_GET_VALUES (SD_CNVT * 256 + 0x78) /* LIN Signal Conversion */
137 #define CMD_CNVT_GET_UNITS (SD_CNVT * 256 + 0x79) /* LIN Signal Conversion */
138 #define CMD_CNVT_SET_VALUES (SD_CNVT * 256 + 0x7A) /* LIN Signal Conversion */
139 #define CMD_CNVT_DESTROY_SESSION (SD_CNVT * 256 + 0x7B) /* LIN Signal Conversion */
140 #define CMD_CNVT_SAVE_SESSION (SD_CNVT * 256 + 0xCB) /* LIN Signal Conversion */
141 #define CMD_CNVT_RESTORE_SESSION (SD_CNVT * 256 + 0xCC) /* LIN Signal Conversion */
142 #define CMD_CNVT_GET_NODE_SIGNALS (SD_CNVT * 256 + 0xCD) /* LIN Signal Conversion */
143
144 /* Flight recorder (SD_FLIGHT) commands */
145
146 #define CMD_FLIGHT_GET_CONFIG (SD_FLIGHT * 256 + 0x50) /* get flight recorder channel info */
147 #define CMD_FLIGHT_START_MON (SD_FLIGHT * 256 + 0x51) /* start flight recorder monitoring */
148 #define CMD_FLIGHT_STOP_MON (SD_FLIGHT * 256 + 0x52) /* stop flight recorder monitoring */
149
150 /* Message responder (SD_RESP) commands: */
151 #define CMD_MSGRESP_ADD (SD_RESP * 256 + 0xB0)
152 #define CMD_MSGRESP_GET (SD_RESP * 256 + 0xB1)
153 #define CMD_MSGRESP_MODIFY (SD_RESP * 256 + 0xB2)
154 #define CMD_MSGRESP_GET_HANDLES (SD_RESP * 256 + 0xB3)
155
156 /* Program loader (SD_PGM) commands: */
157
158 #define CMD_PGM_DESC (SD_PGM * 256 + 0x90) /* Describe a program to be uploaded */
159 #define CMD_PGM_UPLOAD (SD_PGM * 256 + 0x91) /* Upload a program to the Gryphon */
160 #define CMD_PGM_DELETE (SD_PGM * 256 + 0x92) /* Delete an uploaded program */
161 #define CMD_PGM_LIST (SD_PGM * 256 + 0x93) /* Get a list of uploaded programs */
162 #define CMD_PGM_START (SD_PGM * 256 + 0x94) /* Start an uploaded program */
163 #define CMD_PGM_START2 (SD_CLIENT * 256 + 0x94) /* Start an uploaded program */
164 #define CMD_PGM_STOP (SD_PGM * 256 + 0x95) /* Stop an uploaded program */
165 #define CMD_PGM_STATUS (SD_PGM * 256 + 0x96) /* Get the status of an uploaded program */
166 #define CMD_PGM_OPTIONS (SD_PGM * 256 + 0x97) /* Set the upload options */
167 #define CMD_PGM_FILES (SD_PGM * 256 + 0x98) /* Get a list of files & directories */
168
169 /* Scheduler (SD_SCHED) target commands: */
170
171 #define CMD_SCHED_TX (SD_SCHED * 256 + 0x70) /* schedule transmission list */
172 #define CMD_SCHED_KILL_TX (SD_SCHED * 256 + 0x71) /* stop and destroy job */
173 #define CMD_SCHED_MSG_REPLACE (SD_SCHED * 256 + 0x72) /* replace a scheduled message */
174
175 /* USDT (SD_USDT) target commands: */
176
177 #define CMD_USDT_IOCTL (SD_USDT * 256 + 0x47) /* Register/Unregister with USDT */
178 #define CMD_USDT_REGISTER (SD_USDT * 256 + 0xB0) /* Register/Unregister with USDT */
179 #define CMD_USDT_SET_FUNCTIONAL (SD_USDT * 256 + 0xB1) /* Set to use extended addressing*/
180 #define CMD_USDT_SET_STMIN_MULT (SD_USDT * 256 + 0xB2) /* */
181 #define CMD_USDT_SET_STMIN_FC (SD_USDT * 256 + 0xB3) /* */
182 #define CMD_USDT_GET_STMIN_FC (SD_USDT * 256 + 0xB4) /* */
183 #define CMD_USDT_SET_BSMAX_FC (SD_USDT * 256 + 0xB5) /* */
184 #define CMD_USDT_GET_BSMAX_FC (SD_USDT * 256 + 0xB6) /* */
185 #define CMD_USDT_REGISTER_NON_LEGACY (SD_USDT * 256 + 0xB7) /* Register/Unregister with USDT */
186 #define CMD_USDT_SET_STMIN_OVERRIDE (SD_USDT * 256 + 0xB8) /* */
187 #define CMD_USDT_GET_STMIN_OVERRIDE (SD_USDT * 256 + 0xB9) /* */
188 #define CMD_USDT_ACTIVATE_STMIN_OVERRIDE (SD_USDT * 256 + 0xBA) /* */
189
190 /* I/O Power (SD_IOPWR) target commands: */
191
192 #define CMD_IOPWR_GETINP (SD_IOPWR * 256 + 0x40) /* Read current digital inputs */
193 #define CMD_IOPWR_GETLATCH (SD_IOPWR * 256 + 0x41) /* Read latched digital inputs */
194 #define CMD_IOPWR_CLRLATCH (SD_IOPWR * 256 + 0x42) /* Read & clear latched inputs */
195 #define CMD_IOPWR_GETOUT (SD_IOPWR * 256 + 0x43) /* Read digital outputs */
196 #define CMD_IOPWR_SETOUT (SD_IOPWR * 256 + 0x44) /* Write digital outputs */
197 #define CMD_IOPWR_SETBIT (SD_IOPWR * 256 + 0x45) /* Set indicated output bit(s) */
198 #define CMD_IOPWR_CLRBIT (SD_IOPWR * 256 + 0x46) /* Clear indicated output bit(s)*/
199 #define CMD_IOPWR_GETPOWER (SD_IOPWR * 256 + 0x47) /* Read inputs at power on time */
200
201 /* Miscellaneous (SD_UTIL) target commands: */
202
203 #define CMD_UTIL_SET_INIT_STRATEGY (SD_UTIL * 256 + 0x90) /* set the initialization strategy */
204 #define CMD_UTIL_GET_INIT_STRATEGY (SD_UTIL * 256 + 0x91) /* get the initialization strategy */
205
206 /* response frame (FT_RESP) response field definitions: */
207
208 #define RESP_OK 0x00 /* no error */
209 #define RESP_UNKNOWN_ERR 0x01 /* unknown error */
210 #define RESP_UNKNOWN_CMD 0x02 /* unrecognised command */
211 #define RESP_UNSUPPORTED 0x03 /* unsupported command */
212 #define RESP_INVAL_CHAN 0x04 /* invalid channel specified */
213 #define RESP_INVAL_DST 0x05 /* invalid destination */
214 #define RESP_INVAL_PARAM 0x06 /* invalid parameters */
215 #define RESP_INVAL_MSG 0x07 /* invalid message */
216 #define RESP_INVAL_LEN 0x08 /* invalid length field */
217 #define RESP_TX_FAIL 0x09 /* transmit failed */
218 #define RESP_RX_FAIL 0x0a /* receive failed */
219 #define RESP_AUTH_FAIL 0x0b
220 #define RESP_MEM_ALLOC_ERR 0x0c /* memory allocation error */
221 #define RESP_TIMEOUT 0x0d /* command timed out */
222 #define RESP_UNAVAILABLE 0x0e
223 #define RESP_BUF_FULL 0x0f /* buffer full */
224 #define RESP_NO_SUCH_JOB 0x10
225
226 /* Flight recorder (SD_FLIGHT) target definitions */
227
228 #define FR_RESP_AFTER_EVENT 0
229 #define FR_RESP_AFTER_PERIOD 1
230 #define FR_IGNORE_DURING_PER 2
231 #define FR_DEACT_AFTER_PER 0x80
232 #define FR_DEACT_ON_EVENT 0x40
233 #define FR_DELETE 0x20
234 #define FR_PERIOD_MSGS 0x10
235
236 /* Filter data types */
237
238 #define FILTER_DATA_TYPE_HEADER_FRAME 0x00
239 #define FILTER_DATA_TYPE_HEADER 0x01
240 #define FILTER_DATA_TYPE_DATA 0x02
241 #define FILTER_DATA_TYPE_EXTRA_DATA 0x03
242 #define FILTER_EVENT_TYPE_HEADER 0x04
243 #define FILTER_EVENT_TYPE_DATA 0x05
244
245 /* filter flags */
246
247 #define FILTER_PASS_FLAG 0x01
248 #define FILTER_ACTIVE_FLAG 0x02
249
250 /* Filter and Frame Responder Condition operators */
251
252 #define BIT_FIELD_CHECK 0
253 #define SVALUE_GT 1
254 #define SVALUE_GE 2
255 #define SVALUE_LT 3
256 #define SVALUE_LE 4
257 #define VALUE_EQ 5
258 #define VALUE_NE 6
259 #define UVALUE_GT 7
260 #define UVALUE_GE 8
261 #define UVALUE_LT 9
262 #define UVALUE_LE 10
263 #define DIG_LOW_TO_HIGH 11
264 #define DIG_HIGH_TO_LOW 12
265 #define DIG_TRANSITION 13
266
267 /* Modes available via CMD_CARD_SET_FILTERING_MODE */
268 #define FILTER_OFF_PASS_ALL 3
269 #define FILTER_OFF_BLOCK_ALL 4
270 #define FILTER_ON 5
271
272 /* Modes available via CMD_CARD_SET_DEFAULT_FILTER */
273 #define DEFAULT_FILTER_BLOCK 0
274 #define DEFAULT_FILTER_PASS 1
275
276 /* Actions available via CMD_CARD_MODIFY_FILTER */
277 #define DELETE_FILTER 0
278 #define ACTIVATE_FILTER 1
279 #define DEACTIVATE_FILTER 2
280
281 /* Flags to modify how FT_CMD (command) messages are handled */
282 /* These values are ORed with FT_CMD and stored in the Frame Header's */
283 /* Frame Type field for each response. */
284 #define DONT_WAIT_FOR_RESP 0x80
285 #define WAIT_FOR_PREV_RESP 0x40
286 #define RESPONSE_FLAGS (DONT_WAIT_FOR_RESP | WAIT_FOR_PREV_RESP)
287
288
289 /* Program loader options */
290 #define PGM_CONV 1 /* Type of data conversion to perform */
291 #define PGM_TYPE 2 /* Type of file */
292 #define PGM_BIN 11 /* Binary, no conversion */
293 #define PGM_ASCII 12 /* ASCII, convert CR LF to LF */
294 #define PGM_PGM 21 /* Executable */
295 #define PGM_DATA 22 /* Data */
296
297
298
299
300 /* IOCTL definitions - comments indicate data size */
301
302 #define GINIT 0x11100001
303 #define GLOOPON 0x11100002
304 #define GLOOPOFF 0x11100003
305 #define GGETHWTYPE 0x11100004
306 #define GGETREG 0x11100005
307 #define GSETREG 0x11100006
308 #define GGETRXCOUNT 0x11100007
309 #define GSETRXCOUNT 0x11100008
310 #define GGETTXCOUNT 0x11100009
311 #define GSETTXCOUNT 0x1110000a
312 #define GGETRXDROP 0x1110000b
313 #define GSETRXDROP 0x1110000c
314 #define GGETTXDROP 0x1110000d
315 #define GSETTXDROP 0x1110000e
316 #define GGETRXBAD 0x1110000f
317 #define GGETTXBAD 0x11100011
318 #define GGETCOUNTS 0x11100013
319 #define GGETBLMON 0x11100014
320 #define GSETBLMON 0x11100015
321 #define GGETERRLEV 0x11100016
322 #define GSETERRLEV 0x11100017
323 #define GGETBITRATE 0x11100018
324 #define GGETRAM 0x11100019
325 #define GSETRAM 0x1110001a
326
327 #define GCANGETBTRS 0x11200001
328 #define GCANSETBTRS 0x11200002
329 #define GCANGETBC 0x11200003
330 #define GCANSETBC 0x11200004
331 #define GCANGETMODE 0x11200005
332 #define GCANSETMODE 0x11200006
333 #define GCANGETTRANS 0x11200009
334 #define GCANSETTRANS 0x1120000a
335 #define GCANSENDERR 0x1120000b
336 #define GCANRGETOBJ 0x11210001
337 #define GCANRSETSTDID 0x11210002
338 #define GCANRSETEXTID 0x11210003
339 #define GCANRSETDATA 0x11210004
340 #define GCANRENABLE 0x11210005
341 #define GCANRDISABLE 0x11210006
342 #define GCANRGETMASKS 0x11210007
343 #define GCANRSETMASKS 0x11210008
344 #define GCANSWGETMODE 0x11220001
345 #define GCANSWSETMODE 0x11220002
346
347 #define GDLCGETFOURX 0x11400001
348 #define GDLCSETFOURX 0x11400002
349 #define GDLCGETLOAD 0x11400003
350 #define GDLCSETLOAD 0x11400004
351 #define GDLCSENDBREAK 0x11400005
352 #define GDLCABORTTX 0x11400006
353 #define GDLCGETHDRMODE 0x11400007
354 #define GDLCSETHDRMODE 0x11400008
355
356 #define GHONSLEEP 0x11600001
357 #define GHONSILENCE 0x11600002
358
359 #define GKWPSETPTIMES 0x11700011
360 #define GKWPSETWTIMES 0x11700010
361 #define GKWPDOWAKEUP 0x11700008
362 #define GKWPGETBITTIME 0x11700101
363 #define GKWPSETBITTIME 0x11700102
364 #define GKWPSETNODEADDR 0x11700104
365 #define GKWPGETNODETYPE 0x11700105
366 #define GKWPSETNODETYPE 0x11700106
367 #define GKWPSETWAKETYPE 0x11700108
368 #define GKWPSETTARGADDR 0x1170010a
369 #define GKWPSETKEYBYTES 0x1170010c
370 #define GKWPSETSTARTREQ 0x1170010e
371 #define GKWPSETSTARTRESP 0x11700110
372 #define GKWPSETPROTOCOL 0x11700112
373 #define GKWPGETLASTKEYBYTES 0x11700201
374 #define GKWPSETLASTKEYBYTES 0x11700202
375
376 #define GSCPGETBBR 0x11300001
377 #define GSCPSETBBR 0x11300002
378 #define GSCPGETID 0x11300003
379 #define GSCPSETID 0x11300004
380 #define GSCPADDFUNCID 0x11300005
381 #define GSCPCLRFUNCID 0x11300006
382
383 #define GUBPGETBITRATE 0x11800001
384 #define GUBPSETBITRATE 0x11800002
385 #define GUBPGETINTERBYTE 0x11800003
386 #define GUBPSETINTERBYTE 0x11800004
387 #define GUBPGETNACKMODE 0x11800005
388 #define GUBPSETNACKMODE 0x11800006
389 #define GUBPGETRETRYDELAY 0x11800007
390 #define GUBPSETRETRYDELAY 0x11800008
391
392 #define GRESETHC08 0x11800009
393 #define GTESTHC08COP 0x1180000A
394
395 #define GSJAGETLISTEN 0x11250001
396 #define GSJASETLISTEN 0x11250002
397 #define GSJAGETSELFTEST 0x11250003
398 #define GSJASETSELFTEST 0x11250004
399 #define GSJAGETXMITONCE 0x11250005
400 #define GSJASETXMITONCE 0x11250006
401 #define GSJAGETTRIGSTATE 0x11250007
402 #define GSJASETTRIGCTRL 0x11250008
403 #define GSJAGETTRIGCTRL 0x11250009
404 #define GSJAGETOUTSTATE 0x1125000A
405 #define GSJASETOUTSTATE 0x1125000B
406 #define GSJAGETFILTER 0x1125000C
407 #define GSJASETFILTER 0x1125000D
408 #define GSJAGETMASK 0x1125000E
409 #define GSJASETMASK 0x1125000F
410 #define GSJAGETINTTERM 0x11250010
411 #define GSJASETINTTERM 0x11250011
412 #define GSJAGETFTTRANS 0x11250012
413 #define GSJASETFTTRANS 0x11250013
414 #define GSJAGETFTERROR 0x11250014
415
416 /* LIN driver IOCTLs */
417 #define GLINGETBITRATE 0x11C00001
418 #define GLINSETBITRATE 0x11C00002
419 #define GLINGETBRKSPACE 0x11C00003
420 #define GLINSETBRKSPACE 0x11C00004
421 #define GLINGETBRKMARK 0x11C00005
422 #define GLINSETBRKMARK 0x11C00006
423 #define GLINGETIDDELAY 0x11C00007
424 #define GLINSETIDDELAY 0x11C00008
425 #define GLINGETRESPDELAY 0x11C00009
426 #define GLINSETRESPDELAY 0x11C0000A
427 #define GLINGETINTERBYTE 0x11C0000B
428 #define GLINSETINTERBYTE 0x11C0000C
429 #define GLINGETWAKEUPDELAY 0x11C0000D
430 #define GLINSETWAKEUPDELAY 0x11C0000E
431 #define GLINGETWAKEUPTIMEOUT 0x11C0000F
432 #define GLINSETWAKEUPTIMEOUT 0x11C00010
433 #define GLINGETWUTIMOUT3BR 0x11C00011
434 #define GLINSETWUTIMOUT3BR 0x11C00012
435 #define GLINSENDWAKEUP 0x11C00013
436 #define GLINGETMODE 0x11C00014
437 #define GLINSETMODE 0x11C00015
438 #define GLINGETSLEW 0x11C00016
439 #define GLINSETSLEW 0x11C00017
440 #define GLINADDSCHED 0x11C00018
441 #define GLINGETSCHED 0x11C00019
442 #define GLINGETSCHEDSIZE 0x11C0001A
443 #define GLINDELSCHED 0x11C0001B
444 #define GLINACTSCHED 0x11C0001C
445 #define GLINDEACTSCHED 0x11C0001D
446 #define GLINGETACTSCHED 0x11C0001E
447 #define GLINGETNUMSCHEDS 0x11C0001F
448 #define GLINGETSCHEDNAMES 0x11C00020
449 #define GLINSETFLAGS 0x11C00021
450 #define GLINGETAUTOCHECKSUM 0x11C00022
451 #define GLINSETAUTOCHECKSUM 0x11C00023
452 #define GLINGETAUTOPARITY 0x11C00024
453 #define GLINSETAUTOPARITY 0x11C00025
454 #define GLINGETSLAVETABLEENABLE 0x11C00026
455 #define GLINSETSLAVETABLEENABLE 0x11C00027
456 #define GLINGETFLAGS 0x11C00028
457 #define GLINGETWAKEUPMODE 0x11C00029
458 #define GLINSETWAKEUPMODE 0x11C0002A
459 #define GLINGETMASTEREVENTENABLE 0x11C0002B /* 1 */
460 #define GLINSETMASTEREVENTENABLE 0x11C0002C /* 1 */
461 #define GLINGETNSLAVETABLE 0x11C0002D /* 1 get number of slave table entries */
462 #define GLINGETSLAVETABLEPIDS 0x11C0002E /* 1 + n get list of slave table PIDs */
463 #define GLINGETSLAVETABLE 0x11C0002F /* var., 4 + n */
464 #define GLINSETSLAVETABLE 0x11C00030 /* var., 4 + n */
465 #define GLINCLEARSLAVETABLE 0x11C00031 /* 1 */
466 #define GLINCLEARALLSLAVETABLE 0x11C00032 /* 0 */
467 #define GLINGETONESHOT 0x11C00033 /* var., 4 + n */
468 #define GLINSETONESHOT 0x11C00034 /* var., 4 + n */
469 #define GLINCLEARONESHOT 0x11C00035 /* 0 */
470
471 /* delay driver (real-time scheduler) IOCTLs */
472 #define GDLYGETHIVALUE 0x11D50001 /* 4 */
473 #define GDLYSETHIVALUE 0x11D50002 /* 4 set the high water value */
474 /* 2 bytes - stream number */
475 /* 2 bytes - high water value */
476
477 #define GDLYGETLOVALUE 0x11D50003 /* 4 */
478 #define GDLYSETLOVALUE 0x11D50004 /* 4 set the low water value */
479 /* 2 bytes - stream number */
480 /* 2 bytes - low water value */
481
482 #define GDLYGETHITIME 0x11D50005 /* 4 */
483 #define GDLYSETHITIME 0x11D50006 /* 4 set the high water time */
484 /* 2 bytes - stream number */
485 /* 2 bytes - high water time (ms) */
486
487 #define GDLYGETLOTIME 0x11D50007 /* 4 */
488 #define GDLYSETLOTIME 0x11D50008 /* 4 set the low water time */
489 /* 2 bytes - stream number */
490 /* 2 bytes - low water time (ms) */
491
492 #define GDLYGETLOREPORT 0x11D50009 /* 4 get the low water report flag */
493 /* 2 bytes - stream number */
494 /* 2 bytes - 1: report when low */
495 /* 0: do not report when low*/
496
497 #define GDLYFLUSHSTREAM 0x11D5000A /* 2 flush the delay buffer */
498 /* 2 bytes - stream number */
499
500 #define GDLYINITSTREAM 0x11D5000B /* 2 set default hi & lo water marks*/
501 /* 2 bytes - stream number */
502
503 #define GDLYPARTIALFLUSHSTREAM 0x11D5000C /* 4 flush the delay buffer */
504 /* 2 bytes - stream number */
505 /* 2 bytes - data to retain in ms */
506
507
508 #define GINPGETINP 0x11500001
509 #define GINPGETLATCH 0x11500002
510 #define GINPCLRLATCH 0x11500003
511 #define GOUTGET 0x11510001
512 #define GOUTSET 0x11510002
513 #define GOUTSETBIT 0x11510003
514 #define GOUTCLEARBIT 0x11510004
515 #define GPWRGETWHICH 0x11520001
516 #define GPWROFF 0x11520002
517 #define GPWROFFRESET 0x11520003
518 #define GPWRRESET 0x11520004
519
520
521 /* Hardware / driver TYPE and SUBTYPE definitions */
522
523 #define GDUMMY 0x01 /* Dummy device driver TYPE */
524 #define GDGDMARKONE 0x01 /* Dummy device driver SUBTYPE */
525
526 #define GCAN 0x02 /* CAN TYPE */
527 #define G82527 0x01 /* 82527 SUBTYPE */
528 #define GSJA1000 0x02 /* SJA1000 SUBTYPE */
529 #define G82527SW 0x03 /* 82527 single wire subtype */
530 #define G82527ISO11992 0x04 /* 82527 ISO11992 subtype */
531 #define G82527_SINGLECHAN 0x05 /* 82527 single channel */
532 #define G82527SW_SINGLECHAN 0x06 /* 82527 single wire single channel */
533 #define G82527ISO11992_SINGLECHAN 0x07 /* 82527 ISO11992 single channel */
534 #define GSJA1000FT 0x10 /* SJA1000 Fault Tolerant subtype */
535 #define GSJA1000C 0x11 /* SJA1000 Compact subtype */
536 #define GSJA1000FT_FO 0x12 /* SJA1000 single chsnnel Fault Tolerant subtype */
537 #define GSJA1000_BEACON_CANFD 0x1a /* SJA1000 BEACON CAN-FD subtype */
538 #define GSJA1000_BEACON_SW 0x1b /* SJA1000 BEACON CAN single wire subtype */
539 #define GSJA1000_BEACON_FT 0x1c /* SJA1000 BEACON CAN Fault Tolerant subtype */
540
541 #define GJ1850 0x03 /* 1850 TYPE */
542 #define GHBCCPAIR 0x01 /* HBCC SUBTYPE */
543 #define GDLC 0x02 /* GM DLC SUBTYPE */
544 #define GCHRYSLER 0x03 /* Chrysler SUBTYPE */
545 #define GDEHC12 0x04 /* DE HC12 KWP/BDLC SUBTYPE */
546
547 #define GKWP2000 0x04 /* Keyword protocol 2000 TYPE */
548 #define GDEHC12KWP 0x01 /* DE HC12 KWP/BDLC card SUBTYPE */
549
550 #define GHONDA 0x05 /* Honda UART TYPE */
551 #define GDGHC08 0x01 /* DG HC08 SUBTYPE */
552
553 #define GFORDUBP 0x06 /* FORD UBP TYPE */
554 #define GDGUBP08 0x01 /* DG HC08 SUBTYPE */
555
556 #define GSCI 0x09 /* Chrysler SCI TYPE */
557 #define G16550SCI 0x01 /* 16550 type UART based card SUBTYPE */
558
559 #define GCCD 0x0a /* Chrysler C2D TYPE */
560 #define G16550CDP68HC68 0x01 /* 16550 / CDP68HC68S1 card SUBTYPE */
561
562 #define GLIN 0x0b /* LIN TYPE */
563 #define GDGLIN08 0x01 /* DG HC08 SUBTYPE */
564 #define GDGLIN_BEACON 0x03 /* DG BEACON LIN SUBTYPE */
565
566 typedef struct {
567 uint32_t cmd;
568 uint32_t cmd_context; //typically just uint8_t, but let's room for expansion/improvement
569 uint32_t ioctl_command; //should be more generic, but IOCTL is currently the only user
570 uint32_t req_frame_num;
571 uint32_t rsp_frame_num;
572 nstime_t req_time;
573 } gryphon_pkt_info_t;
574
575 /* List contains request data */
576 typedef struct {
577 wmem_list_t *request_frame_data;
578 } gryphon_conversation;
579
580
581 /*
582 * Editor modelines - https://www.wireshark.org/tools/modelines.html
583 *
584 * Local variables:
585 * c-basic-offset: 4
586 * tab-width: 8
587 * indent-tabs-mode: nil
588 * End:
589 *
590 * vi: set shiftwidth=4 tabstop=8 expandtab:
591 * :indentSize=4:tabSize=8:noTabs=true:
592 */
Metzes wireshark repo