Revert "TODO epan/dissectors/asn1/kerberos/packet-kerberos-template.c new GSS flags"

[wireshark-sm.git] / epan / dissectors / packet-ieee80211-radiotap-defs.h

/*-
 * Copyright (c) 2003, 2004 David Young.  All rights reserved.
 *
 * SPDX-License-Identifier: BSD-3-Clause
 */

/*
 * Modifications to fit into the linux IEEE 802.11 stack,
 * Mike Kershaw (dragorn@kismetwireless.net)
 */

#ifndef IEEE80211RADIOTAP_H
#define IEEE80211RADIOTAP_H

/* Base version of the radiotap packet header data */
#define PKTHDR_RADIOTAP_VERSION         0

/* A generic radio capture format is desirable. There is one for
 * Linux, but it is neither rigidly defined (there were not even
 * units given for some fields) nor easily extensible.
 *
 * I suggest the following extensible radio capture format. It is
 * based on a bitmap indicating which fields are present.
 *
 * I am trying to describe precisely what the application programmer
 * should expect in the following, and for that reason I tell the
 * units and origin of each measurement (where it applies), or else I
 * use sufficiently weaselly language ("is a monotonically nondecreasing
 * function of...") that I cannot set false expectations for lawyerly
 * readers.
 */

/* The radio capture header precedes the 802.11 header.
 * All data in the header is little endian on all platforms.
 */
struct ieee80211_radiotap_header {
        uint8_t it_version;     /* Version 0. Only increases
                                 * for drastic changes,
                                 * introduction of compatible
                                 * new fields does not count.
                                 */
        uint8_t it_pad;
        uint16_t it_len;                /* length of the whole
                                 * header in bytes, including
                                 * it_version, it_pad,
                                 * it_len, and data fields.
                                 */
        uint32_t it_present;    /* A bitmap telling which
                                 * fields are present. Set bit 31
                                 * (0x80000000) to extend the
                                 * bitmap by another 32 bits.
                                 * Additional extensions are made
                                 * by setting bit 31.
                                 */
};

/* Name                                 Data type    Units
 * ----                                 ---------    -----
 *
 * IEEE80211_RADIOTAP_TSFT              __le64       microseconds
 *
 *      Value in microseconds of the MAC's 64-bit 802.11 Time
 *      Synchronization Function timer when the first bit of the
 *      MPDU arrived at the MAC. For received frames, only.
 *
 * IEEE80211_RADIOTAP_CHANNEL           2 x uint16_t  MHz, bitmap
 *
 *      Tx/Rx frequency in MHz, followed by flags (see below).
 *
 * IEEE80211_RADIOTAP_FHSS              uint16_t      see below
 *
 *      For frequency-hopping radios, the hop set (first byte)
 *      and pattern (second byte).
 *
 * IEEE80211_RADIOTAP_RATE              u8           500kb/s
 *
 *      Tx/Rx data rate
 *
 * IEEE80211_RADIOTAP_DBM_ANTSIGNAL     s8           decibels from
 *                                                   one milliwatt (dBm)
 *
 *      RF signal power at the antenna, decibel difference from
 *      one milliwatt.
 *
 * IEEE80211_RADIOTAP_DBM_ANTNOISE      s8           decibels from
 *                                                   one milliwatt (dBm)
 *
 *      RF noise power at the antenna, decibel difference from one
 *      milliwatt.
 *
 * IEEE80211_RADIOTAP_DB_ANTSIGNAL      u8           decibel (dB)
 *
 *      RF signal power at the antenna, decibel difference from an
 *      arbitrary, fixed reference.
 *
 * IEEE80211_RADIOTAP_DB_ANTNOISE       u8           decibel (dB)
 *
 *      RF noise power at the antenna, decibel difference from an
 *      arbitrary, fixed reference point.
 *
 * IEEE80211_RADIOTAP_LOCK_QUALITY      uint16_t      unitless
 *
 *      Quality of Barker code lock. Unitless. Monotonically
 *      nondecreasing with "better" lock strength. Called "Signal
 *      Quality" in datasheets.  (Is there a standard way to measure
 *      this?)
 *
 * IEEE80211_RADIOTAP_TX_ATTENUATION    uint16_t      unitless
 *
 *      Transmit power expressed as unitless distance from max
 *      power set at factory calibration.  0 is max power.
 *      Monotonically nondecreasing with lower power levels.
 *
 * IEEE80211_RADIOTAP_DB_TX_ATTENUATION uint16_t      decibels (dB)
 *
 *      Transmit power expressed as decibel distance from max power
 *      set at factory calibration.  0 is max power.  Monotonically
 *      nondecreasing with lower power levels.
 *
 * IEEE80211_RADIOTAP_DBM_TX_POWER      s8           decibels from
 *                                                   one milliwatt (dBm)
 *
 *      Transmit power expressed as dBm (decibels from a 1 milliwatt
 *      reference). This is the absolute power level measured at
 *      the antenna port.
 *
 * IEEE80211_RADIOTAP_FLAGS             u8           bitmap
 *
 *      Properties of transmitted and received frames. See flags
 *      defined below.
 *
 * IEEE80211_RADIOTAP_ANTENNA           u8           antenna index
 *
 *      Unitless indication of the Rx/Tx antenna for this packet.
 *      The first antenna is antenna 0.
 *
 * IEEE80211_RADIOTAP_RX_FLAGS          uint16_t      bitmap
 *
 *     Properties of received frames. See flags defined below.
 *
 * IEEE80211_RADIOTAP_TX_FLAGS          uint16_t      bitmap
 *
 *     Properties of transmitted frames. See flags defined below.
 *
 * IEEE80211_RADIOTAP_RTS_RETRIES       u8           data
 *
 *     Number of rts retries a transmitted frame used.
 *
 * IEEE80211_RADIOTAP_DATA_RETRIES      u8           data
 *
 *     Number of unicast retries a transmitted frame used.
 *
 * IEEE80211_RADIOTAP_MCS       u8, u8, u8              unitless
 *
 *     Contains a bitmap of known fields/flags, the flags, and
 *     the MCS index.
 *
 * IEEE80211_RADIOTAP_AMPDU_STATUS      u32, u16, u8, u8        unitless
 *
 *      Contains the AMPDU information for the subframe.
 *
 * IEEE80211_RADIOTAP_HE                u16, u16, u16, u16, u16, u16 unitless
 *      Contains some information for HE frames.
 *
 * IEEE80211_RADIOTAP_HE_MU             U16, U16, u8[4] unitless
 *
 * IEEE80211_RADIOTAP_HE_MU_USER
 *
 * IEEE80211_RADIOTAP_0_LENGTH_PSDU
 *
 * IEEE80211_RADIOTAP_L_SIG
 *
 * IEEE80211_RADIOTAP_TLVS_PRESENT
 *
 * THERE ARE NO MORE BITS FREE! If you need a new radiotap header you must
 * ask for a TLV value. See www.radiotap.org.
 *
 */
enum ieee80211_radiotap_type {
        IEEE80211_RADIOTAP_TSFT = 0,
        IEEE80211_RADIOTAP_FLAGS = 1,
        IEEE80211_RADIOTAP_RATE = 2,
        IEEE80211_RADIOTAP_CHANNEL = 3,
        IEEE80211_RADIOTAP_FHSS = 4,
        IEEE80211_RADIOTAP_DBM_ANTSIGNAL = 5,
        IEEE80211_RADIOTAP_DBM_ANTNOISE = 6,
        IEEE80211_RADIOTAP_LOCK_QUALITY = 7,
        IEEE80211_RADIOTAP_TX_ATTENUATION = 8,
        IEEE80211_RADIOTAP_DB_TX_ATTENUATION = 9,
        IEEE80211_RADIOTAP_DBM_TX_POWER = 10,
        IEEE80211_RADIOTAP_ANTENNA = 11,
        IEEE80211_RADIOTAP_DB_ANTSIGNAL = 12,
        IEEE80211_RADIOTAP_DB_ANTNOISE = 13,
        IEEE80211_RADIOTAP_RX_FLAGS = 14,
        IEEE80211_RADIOTAP_TX_FLAGS = 15,
        IEEE80211_RADIOTAP_RTS_RETRIES = 16,
        IEEE80211_RADIOTAP_DATA_RETRIES = 17,
        IEEE80211_RADIOTAP_XCHANNEL = 18, /* Unofficial, used by FreeBSD */
        IEEE80211_RADIOTAP_MCS = 19,
        IEEE80211_RADIOTAP_AMPDU_STATUS = 20,
        IEEE80211_RADIOTAP_VHT = 21,
        IEEE80211_RADIOTAP_TIMESTAMP = 22,
        IEEE80211_RADIOTAP_HE = 23,
        IEEE80211_RADIOTAP_HE_MU = 24,
        IEEE80211_RAFIOTAP_HE_MU_USER = 25,
        IEEE80211_RADIOTAP_0_LENGTH_PSDU = 26,
        IEEE80211_RADIOTAP_L_SIG = 27,
        IEEE80211_RADIOTAP_TLVS = 28,

        /* valid in every it_present bitmap, even vendor namespaces */
        IEEE80211_RADIOTAP_RADIOTAP_NAMESPACE = 29,
        IEEE80211_RADIOTAP_VENDOR_NAMESPACE = 30,
        IEEE80211_RADIOTAP_EXT = 31
};

struct ieee80211_radiotap_tlv {
        uint16_t type;
        uint16_t datalen;
        uint8_t data[];
};

/* TLVs we understand. */
#define IEEE80211_RADIOTAP_TLV_S1G        32
#define IEEE80211_RADIOTAP_TLV_U_SIG      33
#define IEEE80211_RADIOTAP_TLV_EHT        34

/* Reserved (deprecated?) radiotap types */
/* Bit 16 in binary : 0000 0000 0001 0000 0000 0000 0000 0000 */
/* Bit 25 in binary : 0000 0010 0000 0000 0000 0000 0000 0000 */
#define IEEE80211_RADIOTAP_RESERVED16 0x00010000
#define IEEE80211_RADIOTAP_RESERVED25 0x02000000

/* Channel flags. */
/* 0x00000008 undefined (reserved?) */
#define IEEE80211_CHAN_700MHZ   0x00000001 /* S1G 700 MHz spectrum channel. */
#define IEEE80211_CHAN_800MHZ   0x00000002 /* S1G 800 MHz spectrum channel. */
#define IEEE80211_CHAN_900MHZ   0x00000004 /* S1G 900 MHz spectrum channel. */
#define IEEE80211_CHAN_TURBO    0x00000010 /* Turbo channel */
#define IEEE80211_CHAN_CCK      0x00000020 /* CCK channel */
#define IEEE80211_CHAN_OFDM     0x00000040 /* OFDM channel */
#define IEEE80211_CHAN_2GHZ     0x00000080 /* 2 GHz spectrum channel. */
#define IEEE80211_CHAN_5GHZ     0x00000100 /* 5 GHz spectrum channel */
#define IEEE80211_CHAN_PASSIVE  0x00000200 /* Only passive scan allowed */
#define IEEE80211_CHAN_DYN      0x00000400 /* Dynamic CCK-OFDM channel */
#define IEEE80211_CHAN_GFSK     0x00000800 /* GFSK channel (FHSS PHY) */

/* Additional XChannel flags. */
#define IEEE80211_CHAN_GSM      0x00001000 /* 900 MHz spectrum channel */
#define IEEE80211_CHAN_STURBO   0x00002000 /* 11a static turbo channel only */
#define IEEE80211_CHAN_HALF     0x00004000 /* Half rate channel */
#define IEEE80211_CHAN_QUARTER  0x00008000 /* Quarter rate channel */
#define IEEE80211_CHAN_HT20     0x00010000 /* HT 20 channel */
#define IEEE80211_CHAN_HT40U    0x00020000 /* HT 40 channel w/ ext above */
#define IEEE80211_CHAN_HT40D    0x00040000 /* HT 40 channel w/ ext below */

#define IEEE80211_CHAN_HT40     (IEEE80211_CHAN_HT40U | IEEE80211_CHAN_HT40D)
#define IEEE80211_CHAN_HT       (IEEE80211_CHAN_HT20 | IEEE80211_CHAN_HT40)
#define IEEE80211_CHAN_S1G \
        (IEEE80211_CHAN_700MHZ | IEEE80211_CHAN_800MHZ | \
         IEEE80211_CHAN_900MHZ)

#define IEEE80211_CHAN_ALL \
        (IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_5GHZ | IEEE80211_CHAN_GFSK | \
         IEEE80211_CHAN_700MHZ | IEEE80211_CHAN_800MHZ | \
         IEEE80211_CHAN_900MHZ | \
         IEEE80211_CHAN_CCK | IEEE80211_CHAN_OFDM | IEEE80211_CHAN_DYN | \
         IEEE80211_CHAN_HALF | IEEE80211_CHAN_QUARTER | \
         IEEE80211_CHAN_HT)
#define IEEE80211_CHAN_ALLTURBO \
        (IEEE80211_CHAN_ALL | IEEE80211_CHAN_TURBO | IEEE80211_CHAN_STURBO)

/* For IEEE80211_RADIOTAP_FLAGS */
#define IEEE80211_RADIOTAP_F_CFP        0x01    /* sent/received
                                                 * during CFP
                                                 */
#define IEEE80211_RADIOTAP_F_SHORTPRE   0x02    /* sent/received
                                                 * with short
                                                 * preamble
                                                 */
#define IEEE80211_RADIOTAP_F_WEP        0x04    /* sent/received
                                                 * with WEP encryption
                                                 */
#define IEEE80211_RADIOTAP_F_FRAG       0x08    /* sent/received
                                                 * with fragmentation
                                                 */
#define IEEE80211_RADIOTAP_F_FCS        0x10    /* frame includes FCS */
#define IEEE80211_RADIOTAP_F_DATAPAD    0x20    /* frame has padding between
                                                 * 802.11 header and payload
                                                 * (to 32-bit boundary)
                                                 */
#define IEEE80211_RADIOTAP_F_BADFCS     0x40    /* frame failed FCS check */

/* For IEEE80211_RADIOTAP_RX_FLAGS */
#define IEEE80211_RADIOTAP_F_RX_BADPLCP 0x0002 /* bad PLCP */

/* For IEEE80211_RADIOTAP_TX_FLAGS */
#define IEEE80211_RADIOTAP_F_TX_FAIL    0x0001  /* failed due to excessive
                                                 * retries */
#define IEEE80211_RADIOTAP_F_TX_CTS     0x0002  /* used cts 'protection' */
#define IEEE80211_RADIOTAP_F_TX_RTS     0x0004  /* used rts/cts handshake */
#define IEEE80211_RADIOTAP_F_TX_NOACK   0x0008  /* don't expect ACK */
#define IEEE80211_RADIOTAP_F_TX_NOSEQNO 0x0010  /* don't overwrite sequence
                                                 * number */
#define IEEE80211_RADIOTAP_F_TX_ORDER   0x0020  /* don't reorder injected
                                                 * frames relative to other
                                                 * frames with this flag */

/* For IEEE80211_RADIOTAP_MCS */
#define IEEE80211_RADIOTAP_MCS_HAVE_BW          0x01
#define IEEE80211_RADIOTAP_MCS_HAVE_MCS         0x02
#define IEEE80211_RADIOTAP_MCS_HAVE_GI          0x04
#define IEEE80211_RADIOTAP_MCS_HAVE_FMT         0x08
#define IEEE80211_RADIOTAP_MCS_HAVE_FEC         0x10
#define IEEE80211_RADIOTAP_MCS_HAVE_STBC        0x20
#define IEEE80211_RADIOTAP_MCS_HAVE_NESS        0x40
#define IEEE80211_RADIOTAP_MCS_NESS_BIT1        0x80

#define IEEE80211_RADIOTAP_MCS_BW_MASK          0x03
#define         IEEE80211_RADIOTAP_MCS_BW_20    0
#define         IEEE80211_RADIOTAP_MCS_BW_40    1
#define         IEEE80211_RADIOTAP_MCS_BW_20L   2
#define         IEEE80211_RADIOTAP_MCS_BW_20U   3
#define IEEE80211_RADIOTAP_MCS_SGI              0x04
#define IEEE80211_RADIOTAP_MCS_FMT_GF           0x08
#define IEEE80211_RADIOTAP_MCS_FEC_LDPC         0x10
#define IEEE80211_RADIOTAP_MCS_STBC_MASK        0x60
#define IEEE80211_RADIOTAP_MCS_STBC_SHIFT       5
#define         IEEE80211_RADIOTAP_MCS_STBC_1   1
#define         IEEE80211_RADIOTAP_MCS_STBC_2   2
#define         IEEE80211_RADIOTAP_MCS_STBC_3   3
#define IEEE80211_RADIOTAP_MCS_NESS_BIT0        0x80

/* For IEEE80211_RADIOTAP_AMPDU_STATUS */
#define IEEE80211_RADIOTAP_AMPDU_REPORT_ZEROLEN         0x0001
#define IEEE80211_RADIOTAP_AMPDU_IS_ZEROLEN             0x0002
#define IEEE80211_RADIOTAP_AMPDU_LAST_KNOWN             0x0004
#define IEEE80211_RADIOTAP_AMPDU_IS_LAST                0x0008
#define IEEE80211_RADIOTAP_AMPDU_DELIM_CRC_ERR          0x0010
#define IEEE80211_RADIOTAP_AMPDU_DELIM_CRC_KNOWN        0x0020
#define IEEE80211_RADIOTAP_AMPDU_EOF                    0x0040
#define IEEE80211_RADIOTAP_AMPDU_EOF_KNOWN              0x0080

/* For IEEE80211_RADIOTAP_VHT */
#define IEEE80211_RADIOTAP_VHT_HAVE_STBC        0x0001
#define IEEE80211_RADIOTAP_VHT_HAVE_TXOP_PS     0x0002
#define IEEE80211_RADIOTAP_VHT_HAVE_GI          0x0004
#define IEEE80211_RADIOTAP_VHT_HAVE_SGI_NSYM_DA 0x0008
#define IEEE80211_RADIOTAP_VHT_HAVE_LDPC_EXTRA  0x0010
#define IEEE80211_RADIOTAP_VHT_HAVE_BF          0x0020
#define IEEE80211_RADIOTAP_VHT_HAVE_BW          0x0040
#define IEEE80211_RADIOTAP_VHT_HAVE_GID         0x0080
#define IEEE80211_RADIOTAP_VHT_HAVE_PAID        0x0100
#define IEEE80211_RADIOTAP_VHT_STBC             0x01
#define IEEE80211_RADIOTAP_VHT_TXOP_PS          0x02
#define IEEE80211_RADIOTAP_VHT_SGI              0x04
#define IEEE80211_RADIOTAP_VHT_SGI_NSYM_DA      0x08
#define IEEE80211_RADIOTAP_VHT_LDPC_EXTRA       0x10
#define IEEE80211_RADIOTAP_VHT_BF               0x20
#define IEEE80211_RADIOTAP_VHT_NSS              0x0f
#define IEEE80211_RADIOTAP_VHT_MCS              0xf0
#define IEEE80211_RADIOTAP_VHT_CODING_LDPC      0x01

#define IEEE80211_RADIOTAP_VHT_BW_MASK          0x1f
#define IEEE80211_RADIOTAP_VHT_BW_20            IEEE80211_RADIOTAP_MCS_BW_20
#define IEEE80211_RADIOTAP_VHT_BW_40            IEEE80211_RADIOTAP_MCS_BW_40
#define IEEE80211_RADIOTAP_VHT_BW_20L           IEEE80211_RADIOTAP_MCS_BW_20L
#define IEEE80211_RADIOTAP_VHT_BW_20U           IEEE80211_RADIOTAP_MCS_BW_20U
#define IEEE80211_RADIOTAP_VHT_BW_80            4
#define IEEE80211_RADIOTAP_VHT_BW_40L           5
#define IEEE80211_RADIOTAP_VHT_BW_40U           6
#define IEEE80211_RADIOTAP_VHT_BW_20LL          7
#define IEEE80211_RADIOTAP_VHT_BW_20LU          8
#define IEEE80211_RADIOTAP_VHT_BW_20UL          9
#define IEEE80211_RADIOTAP_VHT_BW_20UU          10
#define IEEE80211_RADIOTAP_VHT_BW_160           11
#define IEEE80211_RADIOTAP_VHT_BW_80L           12
#define IEEE80211_RADIOTAP_VHT_BW_80U           13
#define IEEE80211_RADIOTAP_VHT_BW_40LL          14
#define IEEE80211_RADIOTAP_VHT_BW_40LU          15
#define IEEE80211_RADIOTAP_VHT_BW_40UL          16
#define IEEE80211_RADIOTAP_VHT_BW_40UU          17
#define IEEE80211_RADIOTAP_VHT_BW_20LLL         18
#define IEEE80211_RADIOTAP_VHT_BW_20LLU         19
#define IEEE80211_RADIOTAP_VHT_BW_20LUL         20
#define IEEE80211_RADIOTAP_VHT_BW_20LUU         21
#define IEEE80211_RADIOTAP_VHT_BW_20ULL         22
#define IEEE80211_RADIOTAP_VHT_BW_20ULU         23
#define IEEE80211_RADIOTAP_VHT_BW_20UUL         24
#define IEEE80211_RADIOTAP_VHT_BW_20UUU         25

/* for IEEE80211_RADIOTAP_TIMESTAMP */
#define IEEE80211_RADIOTAP_TS_UNIT_MASK         0x0F
#define IEEE80211_RADIOTAP_TS_UNIT_MSEC         0x00
#define IEEE80211_RADIOTAP_TS_UNIT_USEC         0x01
#define IEEE80211_RADIOTAP_TS_UNIT_NSEC         0x02
#define IEEE80211_RADIOTAP_TS_SPOS_MASK         0xF0
#define IEEE80211_RADIOTAP_TS_SPOS_SHIFT        4
#define IEEE80211_RADIOTAP_TS_SPOS_MPDU         0x0
#define IEEE80211_RADIOTAP_TS_SPOS_ACQ          0x1
#define IEEE80211_RADIOTAP_TS_SPOS_EOF          0x2
#define IEEE80211_RADIOTAP_TS_SPOS_UNDEF        0xF

/* for IEEE80211_RADIOTAP_HE */
#define IEEE80211_RADIOTAP_HE_PPDU_FORMAT_MASK                  0x0003
#define IEEE80211_RADIOTAP_HE_PPDU_FORMAT_HE_SU                 0
#define IEEE80211_RADIOTAP_HE_PPDU_FORMAT_HE_EXT_SU             1
#define IEEE80211_RADIOTAP_HE_PPDU_FORMAT_HE_MU                 2
#define IEEE80211_RADIOTAP_HE_PPDU_FORMAT_HE_TRIG               3
#define IEEE80211_RADIOTAP_HE_BSS_COLOR_KNOWN                   0x0004
#define IEEE80211_RADIOTAP_HE_BEAM_CHANGE_KNOWN                 0x0008
#define IEEE80211_RADIOTAP_HE_UL_DL_KNOWN                       0x0010
#define IEEE80211_RADIOTAP_HE_DATA_MCS_KNOWN                    0x0020
#define IEEE80211_RADIOTAP_HE_DATA_DCM_KNOWN                    0x0040
#define IEEE80211_RADIOTAP_HE_CODING_KNOWN                      0x0080
#define IEEE80211_RADIOTAP_HE_LDPC_EXTRA_SYMBOL_SEGMENT_KNOWN   0x0100
#define IEEE80211_RADIOTAP_HE_STBC_KNOWN                        0x0200
#define IEEE80211_RADIOTAP_HE_SPATIAL_REUSE_KNOWN               0x0400
#define IEEE80211_RADIOTAP_HE_SPATIAL_REUSE_2_KNOWN             0x0800
#define IEEE80211_RADIOTAP_HE_SPATIAL_REUSE_3_KNOWN             0x1000
#define IEEE80211_RADIOTAP_HE_SPATIAL_REUSE_4_KNOWN             0x2000
#define IEEE80211_RADIOTAP_HE_DATA_BW_RU_ALLOCATION_KNOWN       0x4000
#define IEEE80211_RADIOTAP_HE_DOPPLER_KNOWN                     0x8000
#define IEEE80211_RADIOTAP_HE_PRI_SEC_80_MHZ_KNOWN              0x0001
#define IEEE80211_RADIOTAP_HE_GI_KNOWN                          0x0002
#define IEEE80211_RADIOTAP_HE_NUM_LTF_SYMBOLS_KNOWN             0x0004
#define IEEE80211_RADIOTAP_HE_PRE_FEC_PADDING_FACTOR_KNOWN      0x0008
#define IEEE80211_RADIOTAP_HE_TXBF_KNOWN                        0x0010
#define IEEE80211_RADIOTAP_HE_PE_DISAMBIGUITY_KNOWN             0x0020
#define IEEE80211_RADIOTAP_HE_TXOP_KNOWN                        0x0040
#define IEEE80211_RADIOTAP_HE_MIDAMBLE_PERIODICITY_KNOWN        0x0080
#define IEEE80211_RADIOTAP_HE_RU_ALLOCATION_OFFSET              0x3F00
#define IEEE80211_RADIOTAP_HE_RU_ALLOCATION_OFFSET_KNOWN        0x4000
#define IEEE80211_RADIOTAP_HE_PRI_SEC_80_MHZ                    0x8000
#define IEEE80211_RADIOTAP_HE_BSS_COLOR_MASK                    0x003F
#define IEEE80211_RADIOTAP_HE_BEAM_CHANGE                       0x0040
#define IEEE80211_RADIOTAP_HE_UL_DL                             0x0080
#define IEEE80211_RADIOTAP_HE_DATA_MCS_MASK                     0x0F00
#define IEEE80211_RADIOTAP_HE_DATA_DCM                          0x1000
#define IEEE80211_RADIOTAP_HE_CODING                            0x2000
#define IEEE80211_RADIOTAP_HE_LDPC_EXTRA_SYMBOL_SEGMENT         0x4000
#define IEEE80211_RADIOTAP_HE_STBC                              0x8000
/* HE_SU and HE_EXT_SU format PPDU */
#define IEEE80211_RADIOTAP_HE_SPATIAL_REUSE_MASK                0x000F
#define IEEE80211_RADIOTAP_HE_D4_FFF0                           0xFFF0
/* HE_TRIG format PPDU */
#define IEEE80211_RADIOTAP_HE_SPATIAL_REUSE_1_MASK              0X000F
#define IEEE80211_RADIOTAP_HE_SPATIAL_REUSE_2_MASK              0X00F0
#define IEEE80211_RADIOTAP_HE_SPATIAL_REUSE_3_MASK              0X0F00
#define IEEE80211_RADIOTAP_HE_SPATIAL_REUSE_4_MASK              0XF000
/* HE_MU format PPDU-also uses SPATIAL_REUSE_MASK from above */
#define IEEE80211_RADIOTAP_HE_STA_ID_MASK                       0x7FF0
#define IEEE80211_RADIOTAP_HE_RESERVED_D4_B15                   0x8000

#define IEEE80211_RADIOTAP_HE_DATA_BANDWIDTH_RU_ALLOC_MASK      0x000F
#define IEEE80211_RADIOTAP_HE_DATA_BANDWIDTH_RU_20              0
#define IEEE80211_RADIOTAP_HE_DATA_BANDWIDTH_RU_40              1
#define IEEE80211_RADIOTAP_HE_DATA_BANDWIDTH_RU_80              2
#define IEEE80211_RADIOTAP_HE_DATA_BANDWIDTH_RU_160             3
#define IEEE80211_RADIOTAP_HE_GI_MASK                           0x0030
#define IEEE80211_RADIOTAP_HE_GI_0_POINT_8_MICRO                0
#define IEEE80211_RADIOTAP_HE_GI_1_POINT_6_MICRO                1
#define IEEE80211_RADIOTAP_HE_GI_3_POINT_2_MICRO                2
#define IEEE80211_RADIOTAP_HE_GI_RESERVED                       3
#define IEEE80211_RADIOTAP_HE_LTF_SYMBOL_SIZE                   0x00C0
#define IEEE80211_RADIOTAP_HE_NUM_LTF_SYMBOLS_MASK              0x0700
#define IEEE80211_RADIOTAP_HE_RESERVED_D5_B11                   0x0800
#define IEEE80211_RADIOTAP_HE_PRE_FEC_PADDING_FACTOR_MASK       0x3000
#define IEEE80211_RADIOTAP_HE_TXBF                              0x4000
#define IEEE80211_RADIOTAP_HE_PE_DISAMBIGUITY                   0x8000
#define IEEE80211_RADIOTAP_HE_NSTS_MASK                         0x000F
#define IEEE80211_RADIOTAP_HE_DOPLER_VALUE                      0x0010
#define IEEE80211_RADIOTAP_HE_RESERVED_D6_00E0                  0x00E0
#define IEEE80211_RADIOTAP_HE_TXOP_VALUE_MASK                   0x7F00
#define IEEE80211_RADIOTAP_HE_MIDAMBLE_PERIODICITY              0x8000

/* For IEEE80211_RADIOTAP_HE_MU */
#define IEEE80211_RADIOTAP_HE_MU_SIG_B_MCS_MASK                         0x000F
#define IEEE80211_RADIOTAP_HE_MU_SIG_B_MCS_KNOWN                        0x0010
#define IEEE80211_RADIOTAP_HE_MU_SIG_B_DCM                              0x0020
#define IEEE80211_RADIOTAP_HE_MU_SIG_B_DCM_KNOWN                        0x0040
#define IEEE80211_RADIOTAP_HE_MU_CHAN2_CENTER_26_TONE_RU_BIT_KNOWN      0x0080
#define IEEE80211_RADIOTAP_HE_MU_CHAN1_RUS_KNOWN                        0x0100
#define IEEE80211_RADIOTAP_HE_MU_CHAN2_RUS_KNOWN                        0x0200
#define IEEE80211_RADIOTAP_HE_MU_RESERVED_F1_B10_B11                    0x0C00
#define IEEE80211_RADIOTAP_HE_MU_CHAN1_CENTER_26_TONE_RU_BIT_KNOWN      0x1000
#define IEEE80211_RADIOTAP_HE_MU_CHAN1_CENTER_26_TONE_RU_VALUE          0x2000
#define IEEE80211_RADIOTAP_HE_MU_SIG_B_COMPRESSION_KNOWN                0x4000
#define IEEE80211_RADIOTAP_HE_MU_SYMBOL_CNT_OR_USER_CNT_KNOWN           0x8000
#define IEEE80211_RADIOTAP_HE_MU_BW_FROM_BW_IN_SIG_A_MASK               0x0003
#define IEEE80211_RADIOTAP_HE_MU_BW_FROM_BW_IN_SIG_A_KNOWN              0x0004
#define IEEE80211_RADIOTAP_HE_MU_SIG_B_COMPRESSION_FROM_SIG_A           0x0008
#define IEEE80211_RADIOTAP_HE_MU_SYMBOL_CNT_OR_USER_CNT                 0x00F0
#define IEEE80211_RADIOTAP_HE_MU_PREAMBLE_PUNCTURING_MASK               0x0300
#define IEEE80211_RADIOTAP_HE_MU_PREAMBLE_PUNCTURING_KNOWN              0x0400
#define IEEE80211_RADIOTAP_HE_MU_CHAN2_CENTER_26_TONE_RU_VALUE          0x0800
#define IEEE80211_RADIOTAP_HE_MU_RESERVED_F2_B12_B15                    0xF000

/* For IEEE80211_RADIOTAP_L_SIG */
#define IEEE80211_RADIOTAP_L_SIG_RATE_KNOWN                     0x0001
#define IEEE80211_RADIOTAP_L_SIG_LENGTH_KNOWN                   0x0002
#define IEEE80211_RADIOTAP_L_SIG_RESERVED_MASK                  0xFFFC
#define IEEE80211_RADIOTAP_L_SIG_RATE_MASK                      0x000F
#define IEEE80211_RADIOTAP_L_SIG_LENGTH_MASK                    0xFFF0

/* For IEEE80211_RADIOTAP_TLV_S1G */
#define IEEE80211_RADIOTAP_TLV_S1G_S1G_PPDU_FORMAT_KNOWN               0x0001
#define IEEE80211_RADIOTAP_TLV_S1G_RESPONSE_INDICATION_KNOWN           0x0002
#define IEEE80211_RADIOTAP_TLV_S1G_GUARD_INTERVAL_KNOWN                0x0004
#define IEEE80211_RADIOTAP_TLV_S1G_NSS_KNOWN                           0x0008
#define IEEE80211_RADIOTAP_TLV_S1G_BANDWIDTH_KNOWN                     0x0010
#define IEEE80211_RADIOTAP_TLV_S1G_MCS_KNOWN                           0x0020
#define IEEE80211_RADIOTAP_TLV_S1G_COLOR_KNOWN                         0x0040
#define IEEE80211_RADIOTAP_TLV_S1G_UPLINK_INDICATION_KNOWN             0x0080
#define IEEE80211_RADIOTAP_TLV_S1G_RESERVED_1                          0xFF00
#define IEEE80211_RADIOTAP_TLV_S1G_S1G_PPDU_FORMAT                     0x0003
#define IEEE80211_RADIOTAP_TLV_S1G_RESPONSE_INDICATION                 0x000C
#define IEEE80211_RADIOTAP_TLV_S1G_RESERVED_2                          0x0010
#define IEEE80211_RADIOTAP_TLV_S1G_GUARD_INTERVAL                      0x0020
#define IEEE80211_RADIOTAP_TLV_S1G_NSS                                 0x00C0
#define IEEE80211_RADIOTAP_TLV_S1G_BANDWIDTH                           0x0F00
#define IEEE80211_RADIOTAP_TLV_S1G_MCS                                 0xF000
#define IEEE80211_RADIOTAP_TLV_S1G_COLOR                               0x0007
#define IEEE80211_RADIOTAP_TLV_S1G_UPLINK_INDICATION                   0x0008
#define IEEE80211_RADIOTAP_TLV_S1G_RESERVED_3                          0x00F0
#define IEEE80211_RADIOTAP_TLV_S1G_RSSI                                0xFF00

/* For IEEE80211_RADIOTAP_L_SIG */
#define IEEE80211_RADIOTAP_L_SIG_RATE_KNOWN                     0x0001
#define IEEE80211_RADIOTAP_L_SIG_LENGTH_KNOWN                   0x0002
#define IEEE80211_RADIOTAP_L_SIG_RESERVED_MASK                  0xFFFC
#define IEEE80211_RADIOTAP_L_SIG_RATE_MASK                      0x000F
#define IEEE80211_RADIOTAP_L_SIG_LENGTH_MASK                    0xFFF0

#define IEEE80211_RADIOTAP_TS_FLG_32BIT         0x01
#define IEEE80211_RADIOTAP_TS_FLG_ACCURACY      0x02

#define IEEE80211_RADIOTAP_USIG_PHY_VERSION_ID_KNOWN            0x00000001
#define IEEE80211_RADIOTAP_USIG_BW_KNOWN                        0x00000002
#define IEEE80211_RADIOTAP_USIG_UL_DL_KNOWN                     0x00000004
#define IEEE80211_RADIOTAP_USIG_BSS_COLOR_KNOWN                 0x00000008
#define IEEE80211_RADIOTAP_USIG_TXOP_KNOWN                      0x00000010
#define IEEE80211_RADIOTAP_USIG_BAD_U_SIG_CRC                   0x00000020
#define IEEE80211_RADIOTAP_USIG_RESERVED                        0x00000FC0
#define IEEE80211_RADIOTAP_USIG_PHY_VERSION_IDENTIFIER          0x00007000
#define IEEE80211_RADIOTAP_USIG_BW                              0x00038000
#define IEEE80211_RADIOTAP_USIG_UL_DL                           0x00040000
#define IEEE80211_RADIOTAP_USIG_BSS_COLOR                       0x01F80000
#define IEEE80211_RADIOTAP_USIG_TXOP                            0xFE000000

/* IEEE80211_RADIOTAP_USIG_BW encoding*/
#define IEEE80211_RADIOTAP_USIG_BW_SHIFT                        15
#define IEEE80211_RADIOTAP_USIG_BW_20                           0x0
#define IEEE80211_RADIOTAP_USIG_BW_40                           0x1
#define IEEE80211_RADIOTAP_USIG_BW_80                           0x2
#define IEEE80211_RADIOTAP_USIG_BW_160                          0x3
#define IEEE80211_RADIOTAP_USIG_BW_320_1                        0x4
#define IEEE80211_RADIOTAP_USIG_BW_320_2                        0x5

#define IEEE80211_RADIOTAP_USIG_1_B20_B24                       0x0000001F
#define IEEE80211_RADIOTAP_USIG_1_B25                           0x00000020
#define IEEE80211_RADIOTAP_USIG_2_B0_B1                         0x000000C0
#define IEEE80211_RADIOTAP_USIG_2_B2                            0x00000100
#define IEEE80211_RADIOTAP_USIG_2_B3_B7                         0x00003E00
#define IEEE80211_RADIOTAP_USIG_2_B8                            0x00004000
#define IEEE80211_RADIOTAP_USIG_2_B9_B10                        0x00018000
#define IEEE80211_RADIOTAP_USIG_2_B11_B15                       0x003E0000
#define IEEE80211_RADIOTAP_USIG_2_B16_B19                       0x03C00000
#define IEEE80211_RADIOTAP_USIG_2_B20_B25                       0xFC000000

#define IEEE80211_RADIOTAP_USIG_1_B20_B25                       0x0000003F
#define IEEE80211_RADIOTAP_USIG_2_B3_B6                         0x00001E00
#define IEEE80211_RADIOTAP_USIG_2_B7_B10                        0x0001E000
#define IEEE80211_RADIOTAP_USIG_2_B11_B15                       0x003E0000
#define IEEE80211_RADIOTAP_USIG_2_B16_B19                       0x03C00000
#define IEEE80211_RADIOTAP_USIG_2_B20_B25                       0xFC000000

#define IEEE80211_RADIOTAP_EHT_RESERVED_1                       0x00000001
#define IEEE80211_RADIOTAP_EHT_SPATIAL_REUSE_KNOWN              0x00000002
#define IEEE80211_RADIOTAP_EHT_GUARD_INTERVAL_KNOWN             0x00000004
#define IEEE80211_RADIOTAP_EHT_RESERVED_8                       0x00000008
#define IEEE80211_RADIOTAP_EHT_NUMBER_LTF_SYMBOLS_KNOWN         0x00000010
#define IEEE80211_RADIOTAP_EHT_LDPC_EXTRA_SYMBOL_SEGMENT_KNOWN  0x00000020
#define IEEE80211_RADIOTAP_EHT_PRE_FEC_PADDING_FACTOR_KNOWN     0x00000040
#define IEEE80211_RADIOTAP_EHT_PE_DISAMBIGUITY_KNOWN            0x00000080
#define IEEE80211_RADIOTAP_EHT_DISREGARD_KNOWN                  0x00000100
#define IEEE80211_RADIOTAP_EHT_SOUNDING_DISREGARD_KNOWN         0x00000200
#define IEEE80211_RADIOTAP_EHT_RESERVED_2                       0x00001C00
#define IEEE80211_RADIOTAP_EHT_CRC1_KNOWN                       0x00002000
#define IEEE80211_RADIOTAP_EHT_TAIL1_KNOWN                      0x00004000
#define IEEE80211_RADIOTAP_EHT_CRC2_KNOWN                       0x00008000
#define IEEE80211_RADIOTAP_EHT_TAIL2_KNOWN                      0x00010000
#define IEEE80211_RADIOTAP_EHT_NSS_KNOWN                        0x00020000
#define IEEE80211_RADIOTAP_EHT_BEAMFORMED_KNOWN                 0x00040000
#define IEEE80211_RADIOTAP_EHT_NUMBER_NON_OFDMA_USERS_KNOWN     0x00080000
#define IEEE80211_RADIOTAP_EHT_USER_ENCODING_BLOCK_CRC_KNOWN    0x00100000
#define IEEE80211_RADIOTAP_EHT_USER_ENCODING_BLOCK_TAIL_KNOWN   0x00200000
#define IEEE80211_RADIOTAP_EHT_RU_MRU_SIZE_KNOWN                0x00400000
#define IEEE80211_RADIOTAP_EHT_RU_MRU_INDEX_KNOWN               0x00800000
#define IEEE80211_RADIOTAP_EHT_TB_RU_ALLOCATION_KNOWN           0x01000000
#define IEEE80211_RADIOTAP_EHT_PRIMARY_80MHZ_CHANNEL_POS_KNOWN  0x02000000
#define IEEE80211_RADIOTAP_EHT_RESERVED_FC                      0xFC000000

/* EHT Data 0*/
#define IEEE80211_RADIOTAP_EHT_GI_MASK                          0x00000180
#define IEEE80211_RADIOTAP_EHT_GI_SHIFT                         7

/* EHT Data 1*/
#define IEEE80211_RADIOTAP_EHT_RU_MRU_SIZE_MASK                 0x0000001F
#define IEEE80211_RADIOTAP_EHT_RU_MRU_SIZE_SHIFT                0

/* IEEE80211_RADIOTAP_EHT_RU_MRU_SIZE encoding*/
#define IEEE80211_RADIOTAP_EHT_RU_26                            0
#define IEEE80211_RADIOTAP_EHT_RU_52                            0x1
#define IEEE80211_RADIOTAP_EHT_RU_106                           0x2
#define IEEE80211_RADIOTAP_EHT_RU_242                           0x3
#define IEEE80211_RADIOTAP_EHT_RU_484                           0x4
#define IEEE80211_RADIOTAP_EHT_RU_996                           0x5
#define IEEE80211_RADIOTAP_EHT_RU_2_TIMES_996                   0x6
#define IEEE80211_RADIOTAP_EHT_RU_4_TIMES_994                   0x7
#define IEEE80211_RADIOTAP_EHT_RU_52_PLUS_26                    0x8
#define IEEE80211_RADIOTAP_EHT_RU_106_PLUS_26                   0x9
/* Punctured modes, additional RUs*/
#define IEEE80211_RADIOTAP_EHT_RU_484_PLUS_242                  0xA
#define IEEE80211_RADIOTAP_EHT_RU_996_PLUS_484                  0xB
#define IEEE80211_RADIOTAP_EHT_RU_996_PLUS_484_242              0xC
#define IEEE80211_RADIOTAP_EHT_RU_2_TIMES_996_PLUS_484          0xD
#define IEEE80211_RADIOTAP_EHT_RU_3_TIMES_996                   0xE
#define IEEE80211_RADIOTAP_EHT_RU_3_TIMES_996_PLUS_484          0xF

#endif                          /* IEEE80211_RADIOTAP_H */