1 # SOME DESCRIPTIVE TITLE.
2 # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
3 # This file is distributed under the same license as the wireshark package.
10 "Project-Id-Version: Wireshark\n"
11 "Report-Msgid-Bugs-To: wireshark@packages.debian.org\n"
12 "POT-Creation-Date: 2024-05-20 18:25+0000\n"
13 "PO-Revision-Date: 2019-11-24 12:41+0000\n"
14 "Last-Translator: ks k\n"
15 "Language-Team: Korean (http://www.transifex.com/wireshark/wireshark/language/"
19 "Content-Type: text/plain; charset=UTF-8\n"
20 "Content-Transfer-Encoding: 8bit\n"
21 "Plural-Forms: nplurals=1; plural=0;\n"
26 msgid "Should non-superusers be able to capture packets?"
27 msgstr "일반사용자가 패킷을 갈무리 할 수 있도록 하시겠습니까?"
33 "Dumpcap can be installed in a way that allows members of the \"wireshark\" "
34 "system group to capture packets. This is recommended over the alternative of "
35 "running Wireshark/Tshark directly as root, because less of the code will run "
36 "with elevated privileges."
38 "root로 직접 Wireshark/Tshark를 실행시키는 것의 대안으로 좀 더 적은 권한으로 "
39 "패킷 갈무리를 하기위해 \"와이어샤크\" 체제 묶음의 일원인 Dumpcap이 설치될 수 "
46 #: ../templates:2001 ../templates:7001
48 "For more detailed information please see /usr/share/doc/wireshark-common/"
51 "세부정보는 /usr/share/doc/wireshark-common/README.Debian 파일을 참조하십시오."
57 #: ../templates:2001 ../templates:7001
59 "Enabling this feature may be a security risk, so it is disabled by default. "
60 "If in doubt, it is suggested to leave it disabled."
62 "활성화 하는 것은 보안상 위험할 수 있기 때문에 기본적으로 비활성화 되어 있습니"
63 "다. 비활성화로 두는 것을 추천합니다."
68 msgid "Creating the wireshark system group failed"
69 msgstr "와이어샤크 체제 묶음 작성에 실패했습니다"
75 "The wireshark group does not exist, and creating it failed, so Wireshark "
76 "cannot be configured to capture traffic as an unprivileged user."
78 "와이어샤크 묶음은 존재하지 않아 만들기에 실패하므로 와이어샤크는 권한이 없는 "
79 "사용자로 트래픽을 갈무리하도록 구성할 수 없습니다."
85 "Please create the wireshark system group and try configuring wireshark-"
88 "와이어샤크 체제 묶음을 작성하고 wireshark-common 구성을 다시 시도하십시오."
93 msgid "The wireshark group is a system group"
94 msgstr "와이어샤크 묶음은 체제 묶음입니다"
100 "The wireshark group exists as a user group, but the preferred configuration "
101 "is for it to be created as a system group."
103 "와이어샤크 묶음은 사용자 묶음으로 존재하지만 기본 구성은 체제 묶음으로 작성하"
110 "As a result, purging wireshark-common will not remove the wireshark group, "
111 "but everything else should work properly."
113 "결과적으로 wireshark-common을 제거해도 와이어샤크 묶음이 제거되지는 않지만 다"
114 "른 모든 기능은 제대로 작동해야합니다."
119 msgid "Setting capabilities for dumpcap failed"
120 msgstr "덤프캡에 대한 기능 설정 실패"
126 "The attempt to use Linux capabilities to grant packet-capturing privileges "
127 "to the dumpcap binary failed. Instead, it has had the set-user-id bit set."
129 "리눅스 기능을 사용하여 덤프 갈무리 바이너리에 패킷 갈무리 권한을 부여하려는 "
130 "시도가 실패했습니다. 대신 set-user-id 비트가 설정되었습니다."
135 msgid "Removal of the wireshark group failed"
136 msgstr "와이어샤크 묶음을 제거하지 못했습니다."
142 "When the wireshark-common package is configured to allow non-superusers to "
143 "capture packets the postinst script of wireshark-common creates the "
144 "wireshark group as a system group."
146 "슈퍼 유저가 아닌 사용자가 패킷을 갈무리 할 수 있도록 wireshark-common 패키지"
147 "를 구성하면 wireshark-common의 postinst 스크립트가 와이어샤크 묶음을 체제 묶"
154 "However, on this system the wireshark group is a user group instead of being "
155 "a system group, so purging wireshark-common did not remove it."
157 "그러나, 이 체제에서 와이어샤크 묶음은 체제 묶음이 아닌 사용자 묶음이므로 "
158 "wireshark-common을 제거해도 제거되지 않았습니다."
163 msgid "If the group is no longer needed, please remove it manually."
164 msgstr "묶음이 더 이상 필요하지 않으면 수동으로 제거하십시오."
170 #| msgid "Should non-superusers be able to capture packets?"
171 msgid "Should non-superusers be able to capture system calls?"
172 msgstr "일반사용자가 패킷을 갈무리 할 수 있도록 하시겠습니까?"
179 #| "Dumpcap can be installed in a way that allows members of the "
180 #| "\"wireshark\" system group to capture packets. This is recommended over "
181 #| "the alternative of running Wireshark/Tshark directly as root, because "
182 #| "less of the code will run with elevated privileges."
184 "The falcodump external capture utility (extcap) can be installed in a way "
185 "that allows members of the \"scap\" system group to capture system calls. "
186 "This is recommended over the alternative of running Logray directly as root, "
187 "because less of the code will run with elevated privileges."
189 "root로 직접 Wireshark/Tshark를 실행시키는 것의 대안으로 좀 더 적은 권한으로 "
190 "패킷 갈무리를 하기위해 \"와이어샤크\" 체제 묶음의 일원인 Dumpcap이 설치될 수 "
197 #| msgid "Creating the wireshark system group failed"
198 msgid "Creating the \"scap\" system group failed"
199 msgstr "와이어샤크 체제 묶음 작성에 실패했습니다"
206 #| "The wireshark group does not exist, and creating it failed, so Wireshark "
207 #| "cannot be configured to capture traffic as an unprivileged user."
209 "The \"scap\" group does not exist, and creating it failed, so Logray cannot "
210 "be configured to capture system calls as an unprivileged user."
212 "와이어샤크 묶음은 존재하지 않아 만들기에 실패하므로 와이어샤크는 권한이 없는 "
213 "사용자로 트래픽을 갈무리하도록 구성할 수 없습니다."
220 #| "Please create the wireshark system group and try configuring wireshark-"
223 "Please create the \"scap\" system group and try configuring logray again."
225 "와이어샤크 체제 묶음을 작성하고 wireshark-common 구성을 다시 시도하십시오."
231 #| msgid "The wireshark group is a system group"
232 msgid "The \"scap\" group is a system group"
233 msgstr "와이어샤크 묶음은 체제 묶음입니다"
240 #| "The wireshark group exists as a user group, but the preferred "
241 #| "configuration is for it to be created as a system group."
243 "The \"scap\" group exists as a user group, but the preferred configuration "
244 "is for it to be created as a system group."
246 "와이어샤크 묶음은 사용자 묶음으로 존재하지만 기본 구성은 체제 묶음으로 작성하"
254 #| "As a result, purging wireshark-common will not remove the wireshark "
255 #| "group, but everything else should work properly."
257 "As a result, purging logray will not remove the \"scap\" group, but "
258 "everything else should work properly."
260 "결과적으로 wireshark-common을 제거해도 와이어샤크 묶음이 제거되지는 않지만 다"
261 "른 모든 기능은 제대로 작동해야합니다."