macosx-setup.sh

   1 #!/bin/sh
   2 # Setup development environment on Mac OS X (tested with 10.6.8 and Xcode 3.2.6)
   3 #
   4 # $Id$
   5 #
   6 # Copyright 2011 Michael Tuexen, Joerg Mayer, Guy Harris (see AUTHORS file)
   7 #
   8 # Wireshark - Network traffic analyzer
   9 # By Gerald Combs <gerald@wireshark.org>
  10 # Copyright 1998 Gerald Combs
  11 #
  12 # This program is free software; you can redistribute it and/or
  13 # modify it under the terms of the GNU General Public License
  14 # as published by the Free Software Foundation; either version 2
  15 # of the License, or (at your option) any later version.
  16 #
  17 # This program is distributed in the hope that it will be useful,
  18 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  19 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  20 # GNU General Public License for more details.
  21 #
  22 # You should have received a copy of the GNU General Public License
  23 # along with this program; if not, write to the Free Software
  24 # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
  25
  26 #
  27 # To build cmake
  28 # CMAKE=1
  29 #
  30 # To build all libraries as 32-bit libraries uncomment the following three lines.
  31 #
  32 # export CFLAGS="$CFLAGS -arch i386"
  33 # export CXXFLAGS="$CXXFLAGS -arch i386"
  34 # export LDFLAGS="$LDFLAGS -arch i386"
  35 #
  36 # and change "macx-clang" to "macx-clang-32" in the line below.
  37 #
  38 # Note: when building against the 10.6 SDK, clang fails, because there's
  39 # a missing libstdc++.dylib in the SDK; this does not bother g++, however.
  40 #
  41 #TARGET_PLATFORM=macx-g++
  42 TARGET_PLATFORM=macx-clang
  43
  44 #
  45 # Versions of packages to download and install.
  46 #
  47
  48 #
  49 # Some packages need xz to unpack their current source.
  50 # xz is not yet provided with OS X.
  51 #
  52 XZ_VERSION=5.0.4
  53
  54 #
  55 # In case we want to build with cmake.
  56 #
  57 CMAKE_VERSION=2.8.10.2
  58
  59 #
  60 # The following libraries and tools are required even to build only TShark.
  61 #
  62 GETTEXT_VERSION=0.18.2
  63 GLIB_VERSION=2.36.0
  64 PKG_CONFIG_VERSION=0.28
  65
  66 #
  67 # One or more of the following libraries are required to build Wireshark.
  68 #
  69 # If you don't want to build with Qt, comment out the QT_VERSION= line.
  70 #
  71 # If you want to build with GTK+ 2, comment out the GTK_VERSION=3.* line
  72 # and un-comment the GTK_VERSION=2.* line.
  73 #
  74 # If you don't want to build with GTK+ at all, comment out both lines.
  75 #
  76 #QT_VERSION=5.1.1
  77 QT_VERSION=5.2.0
  78 GTK_VERSION=2.24.17
  79 #GTK_VERSION=3.5.2
  80 if [ "$GTK_VERSION" ]; then
  81     #
  82     # We'll be building GTK+, so we need some additional libraries.
  83     #
  84     GTK_MAJOR_VERSION="`expr $GTK_VERSION : '\([0-9][0-9]*\).*'`"
  85     GTK_MINOR_VERSION="`expr $GTK_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
  86     GTK_DOTDOT_VERSION="`expr $GTK_VERSION : '[0-9][0-9]*\.[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
  87
  88     ATK_VERSION=2.8.0
  89     PANGO_VERSION=1.30.1
  90     PNG_VERSION=1.5.17
  91     PIXMAN_VERSION=0.26.0
  92     CAIRO_VERSION=1.12.2
  93     GDK_PIXBUF_VERSION=2.28.0
  94 fi
  95
  96 #
  97 # The following libraries are optional.
  98 # Comment them out if you don't want them, but note that some of
  99 # the optional libraries are required by other optional libraries.
 100 #
 101 LIBSMI_VERSION=0.4.8
 102 #
 103 # libgpg-error is required for libgcrypt.
 104 #
 105 LIBGPG_ERROR_VERSION=1.10
 106 #
 107 # libgcrypt is required for GnuTLS.
 108 # XXX - the link for "Libgcrypt source code" at
 109 # http://www.gnupg.org/download/#libgcrypt is for 1.5.0, and is a bzip2
 110 # file, but http://directory.fsf.org/project/libgcrypt/ lists only
 111 # 1.4.6.
 112 #
 113 LIBGCRYPT_VERSION=1.5.0
 114 GNUTLS_VERSION=2.12.19
 115 # Stay with Lua 5.1 when updating until the code has been changed
 116 # to support 5.2
 117 LUA_VERSION=5.1.5
 118 PORTAUDIO_VERSION=pa_stable_v19_20111121
 119 #
 120 # XXX - they appear to have an unversioned gzipped tarball for the
 121 # current version; should we just download that, with some other
 122 # way of specifying whether to download the GeoIP API?
 123 #
 124 GEOIP_VERSION=1.4.8
 125
 126 CARES_VERSION=1.10.0
 127
 128 DARWIN_MAJOR_VERSION=`uname -r | sed 's/\([0-9]*\).*/\1/'`
 129
 130 #
 131 # GNU autotools; they're provided with releases up to Snow Leopard, but
 132 # not in later releases.
 133 #
 134 if [[ $DARWIN_MAJOR_VERSION -gt 10 ]]; then
 135     AUTOCONF_VERSION=2.69
 136     AUTOMAKE_VERSION=1.13.3
 137     LIBTOOL_VERSION=2.4.2
 138 fi
 139
 140 uninstall() {
 141     if [ -d macosx-support-libs ]
 142     then
 143         cd macosx-support-libs
 144
 145         #
 146         # Uninstall items in the reverse order from the order in which they're
 147         # installed.  Only uninstall if the download/build/install process
 148         # completed; uninstall the version that appears in the name of
 149         # the -done file.
 150         #
 151         # We also do a "make distclean", so that we don't have leftovers from
 152         # old configurations.
 153         #
 154
 155         installed_cares_version=`ls cares-*-done 2>/dev/null | sed 's/cares-\(.*\)-done/\1/'`
 156         if [ ! -z "$installed_cares_version" ] ; then
 157             echo "Uninstalling C-Ares API:"
 158             cd cares-$installed_cares_version
 159             $DO_MAKE_UNINSTALL || exit 1
 160             make distclean || exit 1
 161             cd ..
 162             rm cares-$installed_cares_version-done
 163         fi
 164
 165         installed_geoip_version=`ls geoip-*-done 2>/dev/null | sed 's/geoip-\(.*\)-done/\1/'`
 166         if [ ! -z "$installed_geoip_version" ] ; then
 167             echo "Uninstalling GeoIP API:"
 168             cd GeoIP-$installed_geoip_version
 169             $DO_MAKE_UNINSTALL || exit 1
 170             make distclean || exit 1
 171             cd ..
 172             rm geoip-$installed_geoip_version-done
 173         fi
 174
 175         if [ "$PORTAUDIO_VERSION" -a -f portaudio-done ] ; then
 176             echo "Uninstalling PortAudio:"
 177             cd portaudio
 178             $DO_MAKE_UNINSTALL || exit 1
 179             make distclean || exit 1
 180             cd ..
 181             rm portaudio-done
 182         fi
 183
 184         installed_lua_version=`ls lua-*-done 2>/dev/null | sed 's/lua-\(.*\)-done/\1/'`
 185         if [ ! -z "$installed_lua_version" ] ; then
 186             echo "Uninstalling Lua:"
 187             #
 188             # Lua has no "make uninstall", so just remove stuff manually.
 189             # There's no configure script, so there's no need for
 190             # "make distclean", either; just do "make clean".
 191             #
 192             (cd /usr/local/bin; $DO_RM -f lua luac)
 193             (cd /usr/local/include; $DO_RM -f lua.h luaconf.h lualib.h lauxlib.h lua.hpp)
 194             (cd /usr/local/lib; $DO_RM -f liblua.a)
 195             (cd /usr/local/man/man1; $DO_RM -f lua.1 luac.1)
 196             cd lua-$installed_lua_version
 197             make clean || exit 1
 198             cd ..
 199             rm lua-$installed_lua_version-done
 200         fi
 201
 202         installed_gnutls_version=`ls gnutls-*-done 2>/dev/null | sed 's/gnutls-\(.*\)-done/\1/'`
 203         if [ ! -z "$installed_gnutls_version" ] ; then
 204             echo "Uninstalling GnuTLS:"
 205             cd gnutls-$installed_gnutls_version
 206             $DO_MAKE_UNINSTALL || exit 1
 207             make distclean || exit 1
 208             cd ..
 209             rm gnutls-$installed_gnutls_version-done
 210         fi
 211
 212         installed_libgcrypt_version=`ls libgcrypt-*-done 2>/dev/null | sed 's/libgcrypt-\(.*\)-done/\1/'`
 213         if [ ! -z "$installed_libgcrypt_version" ] ; then
 214             echo "Uninstalling libgcrypt:"
 215             cd libgcrypt-$installed_libgcrypt_version
 216             $DO_MAKE_UNINSTALL || exit 1
 217             make distclean || exit 1
 218             cd ..
 219             rm libgcrypt-$installed_libgcrypt_version-done
 220         fi
 221
 222         installed_libgpg_error_version=`ls libgpg-error-*-done 2>/dev/null | sed 's/libgpg-error-\(.*\)-done/\1/'`
 223         if [ ! -z "$installed_libgpg_error_version" ] ; then
 224             echo "Uninstalling libgpg-error:"
 225             cd libgpg-error-$installed_libgpg_error_version
 226             $DO_MAKE_UNINSTALL || exit 1
 227             make distclean || exit 1
 228             cd ..
 229             rm libgpg-error-$installed_libgpg_error_version-done
 230         fi
 231
 232         installed_libsmi_version=`ls libsmi-*-done 2>/dev/null | sed 's/libsmi-\(.*\)-done/\1/'`
 233         if [ ! -z "$installed_libsmi_version" ] ; then
 234             echo "Uninstalling libsmi:"
 235             cd libsmi-$installed_libsmi_version
 236             $DO_MAKE_UNINSTALL || exit 1
 237             make distclean || exit 1
 238             cd ..
 239             rm libsmi-$installed_libsmi_version-done
 240         fi
 241
 242         installed_gtk_version=`ls gtk+-*-done 2>/dev/null | sed 's/gtk+-\(.*\)-done/\1/'`
 243         if [ ! -z "$installed_gtk_version" ] ; then
 244             echo "Uninstalling GTK+:"
 245             cd gtk+-$installed_gtk_version
 246             $DO_MAKE_UNINSTALL || exit 1
 247             make distclean || exit 1
 248             cd ..
 249             rm gtk+-$installed_gtk_version-done
 250         fi
 251
 252         installed_gdk_pixbuf_version=`ls gdk-pixbuf-*-done 2>/dev/null | sed 's/gdk-pixbuf-\(.*\)-done/\1/'`
 253         if [ ! -z "$installed_gdk_pixbuf_version" ] ; then
 254             echo "Uninstalling gdk-pixbuf:"
 255             cd gdk-pixbuf-$installed_gdk_pixbuf_version
 256             $DO_MAKE_UNINSTALL || exit 1
 257             make distclean || exit 1
 258             cd ..
 259             rm gdk-pixbuf-$installed_gdk_pixbuf_version-done
 260         fi
 261
 262         installed_pango_version=`ls pango-*-done 2>/dev/null | sed 's/pango-\(.*\)-done/\1/'`
 263         if [ ! -z "$installed_pango_version" ] ; then
 264             echo "Uninstalling Pango:"
 265             cd pango-$installed_pango_version
 266             $DO_MAKE_UNINSTALL || exit 1
 267             make distclean || exit 1
 268             cd ..
 269             rm pango-$installed_pango_version-done
 270         fi
 271
 272         installed_atk_version=`ls atk-*-done 2>/dev/null | sed 's/atk-\(.*\)-done/\1/'`
 273         if [ ! -z "$installed_atk_version" ] ; then
 274             echo "Uninstalling ATK:"
 275             cd atk-$installed_atk_version
 276             $DO_MAKE_UNINSTALL || exit 1
 277             make distclean || exit 1
 278             cd ..
 279             rm atk-$installed_atk_version-done
 280         fi
 281
 282         installed_cairo_version=`ls cairo-*-done 2>/dev/null | sed 's/cairo-\(.*\)-done/\1/'`
 283         if [ ! -z "$installed_cairo_version" ] ; then
 284             echo "Uninstalling Cairo:"
 285             cd cairo-$installed_cairo_version
 286             $DO_MAKE_UNINSTALL || exit 1
 287             make distclean || exit 1
 288             cd ..
 289             rm cairo-$installed_cairo_version-done
 290         fi
 291
 292         installed_pixman_version=`ls pixman-*-done 2>/dev/null | sed 's/pixman-\(.*\)-done/\1/'`
 293         if [ ! -z "$installed_pixman_version" ] ; then
 294             echo "Uninstalling pixman:"
 295             cd pixman-$installed_pixman_version
 296             $DO_MAKE_UNINSTALL || exit 1
 297             make distclean || exit 1
 298             cd ..
 299             rm pixman-$installed_pixman_version-done
 300         fi
 301
 302         installed_libpng_version=`ls libpng-*-done 2>/dev/null | sed 's/libpng-\(.*\)-done/\1/'`
 303         if [ ! -z "$installed_libpng_version" ] ; then
 304             echo "Uninstalling libpng:"
 305             cd libpng-$installed_libpng_version
 306             $DO_MAKE_UNINSTALL || exit 1
 307             make distclean || exit 1
 308             cd ..
 309             rm libpng-$installed_libpng_version-done
 310         fi
 311
 312         installed_qt_version=`ls qt-*-done 2>/dev/null | sed 's/qt-\(.*\)-done/\1/'`
 313         if [ ! -z "$installed_qt_version" ] ; then
 314             echo "Uninstalling Qt:"
 315             cd qt-everywhere-opensource-src-$installed_qt_version
 316             $DO_MAKE_UNINSTALL || exit 1
 317             #
 318             # XXX - "make distclean" doesn't work.  qmake sure does a
 319             # good job of constructing Makefiles that work correctly....
 320             #
 321             #make distclean || exit 1
 322             cd ..
 323             rm qt-$installed_qt_version-done
 324         fi
 325
 326         installed_glib_version=`ls glib-*-done 2>/dev/null | sed 's/glib-\(.*\)-done/\1/'`
 327         if [ ! -z "$installed_glib_version" ] ; then
 328             echo "Uninstalling GLib:"
 329             cd glib-$installed_glib_version
 330             $DO_MAKE_UNINSTALL || exit 1
 331             make distclean || exit 1
 332             cd ..
 333             rm glib-$installed_glib_version-done
 334         fi
 335
 336         installed_pkg_config_version=`ls pkg-config-*-done 2>/dev/null | sed 's/pkg-config-\(.*\)-done/\1/'`
 337         if [ ! -z "$installed_pkg_config_version" ] ; then
 338             echo "Uninstalling pkg-config:"
 339             cd pkg-config-$installed_pkg_config_version
 340             $DO_MAKE_UNINSTALL || exit 1
 341             make distclean || exit 1
 342             cd ..
 343             rm pkg-config-$installed_pkg_config_version-done
 344         fi
 345
 346         installed_gettext_version=`ls gettext-*-done 2>/dev/null | sed 's/gettext-\(.*\)-done/\1/'`
 347         if [ ! -z "$installed_gettext_version" ] ; then
 348             echo "Uninstalling GNU gettext:"
 349             cd gettext-$installed_gettext_version
 350             $DO_MAKE_UNINSTALL || exit 1
 351             make distclean || exit 1
 352             cd ..
 353             rm gettext-$installed_gettext_version-done
 354         fi
 355
 356         installed_cmake_version=`ls cmake-*-done 2>/dev/null | sed 's/cmake-\(.*\)-done/\1/'`
 357         if [ ! -z "$installed_cmake_version" ]; then
 358             echo "Uninstalling CMake:"
 359             cd cmake-$installed_cmake_version
 360             $DO_MAKE_UNINSTALL || exit 1
 361             make distclean || exit 1
 362             cd ..
 363             rm cmake-$installed_cmake_version-done
 364         fi
 365
 366         installed_libtool_version=`ls libtool-*-done 2>/dev/null | sed 's/libtool-\(.*\)-done/\1/'`
 367         if [ ! -z "$installed_libtool_version" ] ; then
 368             echo "Uninstalling GNU libtool:"
 369             cd libtool-$installed_libtool_version
 370             mv /usr/local/bin/glibtool /usr/local/bin/libtool
 371             mv /usr/local/bin/glibtoolize /usr/local/bin/libtoolize
 372             $DO_MAKE_UNINSTALL || exit 1
 373             make distclean || exit 1
 374             cd ..
 375             rm libtool-$installed_libtool_version-done
 376         fi
 377
 378         installed_automake_version=`ls automake-*-done 2>/dev/null | sed 's/automake-\(.*\)-done/\1/'`
 379         if [ ! -z "$installed_automake_version" ] ; then
 380             echo "Uninstalling GNU automake:"
 381             cd automake-$installed_automake_version
 382             $DO_MAKE_UNINSTALL || exit 1
 383             make distclean || exit 1
 384             cd ..
 385             rm automake-$installed_automake_version-done
 386         fi
 387
 388         installed_autoconf_version=`ls autoconf-*-done 2>/dev/null | sed 's/autoconf-\(.*\)-done/\1/'`
 389         if [ ! -z "$installed_autoconf_version" ] ; then
 390             echo "Uninstalling GNU autoconf:"
 391             cd autoconf-$installed_autoconf_version
 392             $DO_MAKE_UNINSTALL || exit 1
 393             make distclean || exit 1
 394             cd ..
 395             rm autoconf-$installed_autoconf_version-done
 396         fi
 397
 398         installed_xz_version=`ls xz-*-done 2>/dev/null | sed 's/xz-\(.*\)-done/\1/'`
 399         if [ ! -z "$installed_xz_version" ] ; then
 400             echo "Uninstalling xz:"
 401             cd xz-$installed_xz_version
 402             $DO_MAKE_UNINSTALL || exit 1
 403             make distclean || exit 1
 404             cd ..
 405             rm xz-$installed_xz_version-done
 406         fi
 407     fi
 408 }
 409
 410 #
 411 # Do we have permission to write in /usr/local?
 412 #
 413 # If so, assume we have permission to write in its subdirectories.
 414 # (If that's not the case, this test needs to check the subdirectories
 415 # as well.)
 416 #
 417 # If not, do "make install", "make uninstall", and the removes for Lua
 418 # with sudo.
 419 #
 420 if [ -w /usr/local ]
 421 then
 422     DO_MAKE_INSTALL="make install"
 423     DO_MAKE_UNINSTALL="make uninstall"
 424     DO_RM="rm"
 425 else
 426     DO_MAKE_INSTALL="sudo make install"
 427     DO_MAKE_UNINSTALL="sudo make uninstall"
 428     DO_RM="sudo rm"
 429 fi
 430
 431 #
 432 # If we have SDKs available, the default target OS is the major version
 433 # of the one we're running; get that and strip off the third component.
 434 #
 435 for i in /Developer/SDKs \
 436     /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs \
 437     /Library/Developer/CommandLineTools/SDKs
 438 do
 439     if [ -d "$i" ]
 440     then
 441         min_osx_target=`sw_vers -productVersion | sed 's/\([[0-9]]*\).\([[0-9]]*\).[[0-9]]*/\1.\2/'`
 442         break
 443     fi
 444 done
 445
 446 #
 447 # Parse command-line flags:
 448 #
 449 # -h - print help.
 450 # -t <target> - build libraries so that they'll work on the specified
 451 # version of OS X and later versions.
 452 # -u - do an uninstall.
 453 #
 454 while getopts ht:u name
 455 do
 456     case $name in
 457     u)
 458         do_uninstall=yes
 459         ;;
 460     t)
 461         min_osx_target="$OPTARG"
 462         ;;
 463     h|?)
 464         echo "Usage: macosx-setup.sh [ -t <target> ] [ -u ]" 1>&1
 465         exit 0
 466         ;;
 467     esac
 468 done
 469
 470 if [ "$do_uninstall" = "yes" ]
 471 then
 472     uninstall
 473     exit 0
 474 fi
 475
 476 #
 477 # Configure scripts tend to set CFLAGS and CXXFLAGS to "-g -O2" if
 478 # invoked without CFLAGS or CXXFLAGS being set in the environment.
 479 #
 480 # However, we *are* setting them in the environment, for our own
 481 # nefarious purposes, so start them out as "-g -O2".
 482 #
 483 CFLAGS="-g -O2"
 484 CXXFLAGS="-g -O2"
 485
 486 #
 487 # To make this work on Leopard (rather than working *on* Snow Leopard
 488 # when building *for* Leopard) will take more work.
 489 #
 490 # For one thing, Leopard's /usr/X11/lib/libXdamage.la claims, at least
 491 # with all software updates applied, that the Xdamage shared library
 492 # is libXdamage.1.0.0.dylib, but it is, in fact, libXdamage.1.1.0.dylib.
 493 # This causes problems when building GTK+, so the script would have to
 494 # fix that file.
 495 #
 496 if [[ $DARWIN_MAJOR_VERSION -le 9 ]]; then
 497     echo "This script does not support any versions of OS X before Snow Leopard" 1>&2
 498     exit 1
 499 fi
 500
 501 # if no make options are present, set default options
 502 if [ -z "$MAKE_BUILD_OPTS" ] ; then
 503     # by default use 1.5x number of cores for parallel build
 504     MAKE_BUILD_OPTS="-j $(( $(sysctl -n hw.logicalcpu) * 3 / 2))"
 505 fi
 506
 507 #
 508 # If we have a target release, look for its SDK, and build libraries
 509 # against it rather than against the headers and, more importantly,
 510 # libraries that come with the OS, so that we don't end up with
 511 # support libraries that only work on the OS version on which
 512 # we built them, not earlier versions of the same release, or
 513 # earlier releases if the minimum is earlier.
 514 #
 515 if [ ! -z "$min_osx_target" ]
 516 then
 517     for i in /Developer/SDKs \
 518         /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs \
 519         /Library/Developer/CommandLineTools/SDKs
 520     do
 521         if [ -d "$i"/"MacOSX$min_osx_target.sdk" ]
 522         then
 523             SDKPATH="$i"/"MacOSX$min_osx_target.sdk"
 524             break
 525         fi
 526     done
 527
 528     if [ -z "$SDKPATH" ]
 529     then
 530         echo "macosx-setup.sh: Couldn't find the SDK for OS X $min_osx_target" 1>&2
 531         exit 1
 532     fi
 533
 534     #
 535     # Make sure there are links to /usr/local/include and /usr/local/lib
 536     # in the SDK's usr/local.
 537     #
 538     if [ ! -e $SDKPATH/usr/local/include ]
 539     then
 540         if [ ! -d $SDKPATH/usr/local ]
 541         then
 542             sudo mkdir $SDKPATH/usr/local
 543         fi
 544         sudo ln -s /usr/local/include $SDKPATH/usr/local/include
 545     fi
 546     if [ ! -e $SDKPATH/usr/local/lib ]
 547     then
 548         if [ ! -d $SDKPATH/usr/local ]
 549         then
 550             sudo mkdir $SDKPATH/usr/local
 551         fi
 552         sudo ln -s /usr/local/lib $SDKPATH/usr/local/lib
 553     fi
 554
 555     #
 556     # Set the minimum OS version for which to build to the specified
 557     # minimum target OS version, so we don't, for example, end up using
 558     # linker features supported by the OS verson on which we're building
 559     # but not by the target version.
 560     #
 561     VERSION_MIN_FLAGS="-mmacosx-version-min=$min_osx_target"
 562
 563     #
 564     # Compile and link against the SDK.
 565     #
 566     SDKFLAGS="-isysroot $SDKPATH"
 567
 568     if [[ "$min_osx_target" == "10.5" ]]
 569     then
 570         #
 571         # Cairo is part of Mac OS X 10.6 and later.
 572         # The *headers* are supplied by 10.5, but the *libraries*
 573         # aren't, so we have to build it if we're building for 10.5.
 574         #
 575         cairo_not_in_the_os=yes
 576
 577         #
 578         # Build with older versions of the support libraries, as
 579         # were used on the Wireshark Leopard buildbot at one
 580         # point.  (Most of these versions come from the About page
 581         # from Wireshark 1.8.6, the last build done on that buildbot;
 582         # the ATK version isn't reported, so this is a guess.)
 583         #
 584         # If you want to try building with newer versions of
 585         # the libraries, note that:
 586         #
 587         # The version of fontconfig that comes with Leopard doesn't
 588         # support FC_WEIGHT_EXTRABLACK, so we can't use any version
 589         # of Pango newer than 1.22.4.
 590         #
 591         # However, Pango 1.22.4 doesn't work with versions of GLib
 592         # after 2.29.6, because Pango 1.22.4 uses G_CONST_RETURN and
 593         # GLib 2.29.8 and later deprecate it (there doesn't appear to
 594         # be a GLib 2.29.7).  That means we'd either have to patch
 595         # Pango not to use it (just use "const"; G_CONST_RETURN was
 596         # there to allow code to choose whether to use "const" or not),
 597         # or use GLib 2.29.6 or earlier.
 598         #
 599         # GLib 2.29.6 includes an implementation of g_bit_lock() that,
 600         # on x86 (32-bit and 64-bit), uses asms in a fashion
 601         # ("asm volatile goto") that requires GCC 4.5 or later, which
 602         # is later than the compilers that come with Leopard and Snow
 603         # Leopard.  Recent versions of GLib check for that, but 2.29.6
 604         # doesn't, so, if you want to build GLib 2.29.6 on Leopard or
 605         # Snow Leopard, you would have to patch glib/gbitlock.c to do
 606         # what the newer versions of GLib do:
 607         #
 608         #  define a USE_ASM_GOTO macro that indicates whether "asm goto"
 609         #  can be used:
 610         #    #if (defined (i386) || defined (__amd64__))
 611         #      #if __GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5)
 612         #        #define USE_ASM_GOTO 1
 613         #      #endif
 614         #    #endif
 615         #
 616         #  replace all occurrences of
 617         #
 618         #    #if defined (__GNUC__) && (defined (i386) || defined (__amd64__))
 619         #
 620         #  with
 621         #
 622         #    #ifdef USE_ASM_GOTO
 623         #
 624         # Using GLib 2.29.6 or earlier, however, means that we can't
 625         # use a version of ATK later than 2.3.93, as those versions
 626         # don't work with GLib 2.29.6.  The same applies to gdk-pixbuf;
 627         # versions of gdk-pixbuf after 2.24.1 won't work with GLib
 628         # 2.29.6.
 629         #
 630         # Then you have to make sure that what you've build doesn't
 631         # cause the X server that comes with Leopard to crash; at
 632         # least one attempt at building for Leopard did.
 633         #
 634         # At least if building on Leopard, you might also find
 635         # that, with various older versions of Cairo, including
 636         # 1.6.4 and at least some 1.8.x versions, when you try to
 637         # build it, the build fails because it can't find
 638         # png_set_longjmp_fn().  I vaguely remember dealing with that,
 639         # ages ago, but don't remember what I did.
 640         #
 641         GLIB_VERSION=2.16.3
 642         CAIRO_VERSION=1.6.4
 643         ATK_VERSION=1.24.0
 644         PANGO_VERSION=1.20.2
 645         GTK_VERSION=2.12.9
 646
 647         #
 648         # That version of GTK+ includes gdk-pixbuf.
 649         # XXX - base this on the version of GTK+ requested.
 650         #
 651         GDK_PIXBUF_VERSION=
 652
 653         #
 654         # Libgcrypt 1.5.0 fails to compile due to some problem with an
 655         # asm in rijndael.c, at least with i686-apple-darwin10-gcc-4.2.1
 656         # (GCC) 4.2.1 (Apple Inc. build 5666) (dot 3) when building
 657         # 32-bit.
 658         #
 659         # We try libgcrypt 1.4.3 instead, as that's what shows up in
 660         # the version from the Leopard buildbot.
 661         LIBGCRYPT_VERSION=1.4.3
 662
 663         #
 664         # Build 32-bit while we're at it; Leopard has a bug that
 665         # causes some BPF functions not to work with 64-bit userland
 666         # code, so capturing won't work.
 667         #
 668         CFLAGS="$CFLAGS -arch i386"
 669         CXXFLAGS="$CXXFLAGS -arch i386"
 670         export LDFLAGS="$LDFLAGS -arch i386"
 671     fi
 672 fi
 673
 674 export CFLAGS
 675 export CXXFLAGS
 676
 677 #
 678 # You need Xcode or the command-line tools installed to get the compilers.
 679 #
 680 if [ ! -x /usr/bin/xcodebuild ]; then
 681     echo "Please install Xcode first (should be available on DVD or from http://developer.apple.com/xcode/index.php)."
 682     exit 1
 683 fi
 684
 685 if [ "$QT_VERSION" ]; then
 686     #
 687     # We need Xcode, not just the command-line tools, installed to build
 688     # Qt.
 689     #
 690     if ! /usr/bin/xcrun -find xcrun >/dev/null 2>&1; then
 691         echo "Please install Xcode first (should be available on DVD or from http://developer.apple.com/xcode/index.php)."
 692         echo "The command-line build tools are not sufficient to build Qt."
 693         exit 1
 694     fi
 695 fi
 696 if [ "$GTK_VERSION" ]; then
 697     #
 698     # If we're building with GTK+, you also need the X11 SDK; with at least
 699     # some versions of OS X and Xcode, that is, I think, an optional install.
 700     # (Or it might be installed with X11, but I think *that* is an optional
 701     # install on at least some versions of OS X.)
 702     #
 703     if [ ! -d /usr/X11/include ]; then
 704         echo "Please install X11 and the X11 SDK first."
 705         exit 1
 706     fi
 707 fi
 708
 709 export PKG_CONFIG_PATH=/usr/local/lib/pkgconfig:/usr/X11/lib/pkgconfig
 710
 711 #
 712 # Do all the downloads and untarring in a subdirectory, so all that
 713 # stuff can be removed once we've installed the support libraries.
 714 #
 715 if [ ! -d macosx-support-libs ]
 716 then
 717     mkdir macosx-support-libs || exit 1
 718 fi
 719 cd macosx-support-libs
 720
 721 # Start with xz: It is the sole download format of glib later than 2.31.2
 722 #
 723 if [ "$XZ_VERSION" -a ! -f xz-$XZ_VERSION-done ] ; then
 724     echo "Downloading, building, and installing xz:"
 725     [ -f xz-$XZ_VERSION.tar.bz2 ] || curl -O http://tukaani.org/xz/xz-$XZ_VERSION.tar.bz2 || exit 1
 726     bzcat xz-$XZ_VERSION.tar.bz2 | tar xf - || exit 1
 727     cd xz-$XZ_VERSION
 728     CFLAGS="$CFLAGS -D_FORTIFY_SOURCE=0" ./configure || exit 1
 729     make $MAKE_BUILD_OPTS || exit 1
 730     $DO_MAKE_INSTALL || exit 1
 731     cd ..
 732     touch xz-$XZ_VERSION-done
 733 fi
 734
 735 if [ "$AUTOCONF_VERSION" -a ! -f autoconf-$AUTOCONF_VERSION-done ] ; then
 736     echo "Downloading, building and installing GNU autoconf..."
 737     [ -f autoconf-$AUTOCONF_VERSION.tar.xz ] || curl -O ftp://ftp.gnu.org/gnu/autoconf/autoconf-$AUTOCONF_VERSION.tar.xz || exit 1
 738     xzcat autoconf-$AUTOCONF_VERSION.tar.xz | tar xf - || exit 1
 739     cd autoconf-$AUTOCONF_VERSION
 740     ./configure || exit 1
 741     make $MAKE_BUILD_OPTS || exit 1
 742     $DO_MAKE_INSTALL || exit 1
 743     cd ..
 744     touch autoconf-$AUTOCONF_VERSION-done
 745 fi
 746
 747 if [ "$AUTOMAKE_VERSION" -a ! -f automake-$AUTOMAKE_VERSION-done ] ; then
 748     echo "Downloading, building and installing GNU automake..."
 749     [ -f automake-$AUTOMAKE_VERSION.tar.xz ] || curl -O ftp://ftp.gnu.org/gnu/automake/automake-$AUTOMAKE_VERSION.tar.xz || exit 1
 750     xzcat automake-$AUTOMAKE_VERSION.tar.xz | tar xf - || exit 1
 751     cd automake-$AUTOMAKE_VERSION
 752     ./configure || exit 1
 753     make $MAKE_BUILD_OPTS || exit 1
 754     $DO_MAKE_INSTALL || exit 1
 755     cd ..
 756     touch automake-$AUTOMAKE_VERSION-done
 757 fi
 758
 759 if [ "$LIBTOOL_VERSION" -a ! -f libtool-$LIBTOOL_VERSION-done ] ; then
 760     echo "Downloading, building and installing GNU libtool..."
 761     [ -f libtool-$LIBTOOL_VERSION.tar.xz ] || curl -O ftp://ftp.gnu.org/gnu/libtool/libtool-$LIBTOOL_VERSION.tar.xz || exit 1
 762     xzcat libtool-$LIBTOOL_VERSION.tar.xz | tar xf - || exit 1
 763     cd libtool-$LIBTOOL_VERSION
 764     ./configure || exit 1
 765     make $MAKE_BUILD_OPTS || exit 1
 766     $DO_MAKE_INSTALL || exit 1
 767     mv /usr/local/bin/libtool /usr/local/bin/glibtool
 768     mv /usr/local/bin/libtoolize /usr/local/bin/glibtoolize
 769     cd ..
 770     touch libtool-$LIBTOOL_VERSION-done
 771 fi
 772
 773 if [ -n "$CMAKE" -a ! -f cmake-$CMAKE_VERSION-done ]; then
 774   echo "Downloading, building, and installing CMAKE:"
 775   cmake_dir=`expr $CMAKE_VERSION : '\([0-9][0-9]*\.[0-9][0-9]*\).*'`
 776   [ -f cmake-$CMAKE_VERSION.tar.gz ] || curl -O http://www.cmake.org/files/v$cmake_dir/cmake-$CMAKE_VERSION.tar.gz || exit 1
 777   gzcat cmake-$CMAKE_VERSION.tar.gz | tar xf - || exit 1
 778   cd cmake-$CMAKE_VERSION
 779   ./bootstrap || exit 1
 780   make $MAKE_BUILD_OPTS || exit 1
 781   $DO_MAKE_INSTALL || exit 1
 782   cd ..
 783   touch cmake-$CMAKE_VERSION-done
 784 fi
 785
 786 #
 787 # Start with GNU gettext; GLib requires it, and OS X doesn't have it
 788 # or a BSD-licensed replacement.
 789 #
 790 # At least on Lion with Xcode 4, _FORTIFY_SOURCE gets defined as 2
 791 # by default, which causes, for example, stpncpy to be defined as
 792 # a hairy macro that collides with the GNU gettext configure script's
 793 # attempts to workaround AIX's lack of a declaration for stpncpy,
 794 # with the result being a huge train wreck.  Define _FORTIFY_SOURCE
 795 # as 0 in an attempt to keep the trains on separate tracks.
 796 #
 797 if [ ! -f gettext-$GETTEXT_VERSION-done ] ; then
 798     echo "Downloading, building, and installing GNU gettext:"
 799     [ -f gettext-$GETTEXT_VERSION.tar.gz ] || curl -O http://ftp.gnu.org/pub/gnu/gettext/gettext-$GETTEXT_VERSION.tar.gz || exit 1
 800     gzcat gettext-$GETTEXT_VERSION.tar.gz | tar xf - || exit 1
 801     cd gettext-$GETTEXT_VERSION
 802     CFLAGS="$CFLAGS -D_FORTIFY_SOURCE=0 $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
 803     make $MAKE_BUILD_OPTS || exit 1
 804     $DO_MAKE_INSTALL || exit 1
 805     cd ..
 806     touch gettext-$GETTEXT_VERSION-done
 807 fi
 808
 809 #
 810 # GLib depends on pkg-config.
 811 # By default, pkg-config depends on GLib; we break the dependency cycle
 812 # by configuring pkg-config to use its own internal version of GLib.
 813 #
 814 if [ ! -f pkg-config-$PKG_CONFIG_VERSION-done ] ; then
 815     echo "Downloading, building, and installing pkg-config:"
 816     [ -f pkg-config-$PKG_CONFIG_VERSION.tar.gz ] || curl -O http://pkgconfig.freedesktop.org/releases/pkg-config-$PKG_CONFIG_VERSION.tar.gz || exit 1
 817     gzcat pkg-config-$PKG_CONFIG_VERSION.tar.gz | tar xf - || exit 1
 818     cd pkg-config-$PKG_CONFIG_VERSION
 819     ./configure --with-internal-glib || exit 1
 820     make $MAKE_BUILD_OPTS || exit 1
 821     $DO_MAKE_INSTALL || exit 1
 822     cd ..
 823     touch pkg-config-$PKG_CONFIG_VERSION-done
 824 fi
 825
 826 if [ ! -f glib-$GLIB_VERSION-done ] ; then
 827     echo "Downloading, building, and installing GLib:"
 828     glib_dir=`expr $GLIB_VERSION : '\([0-9][0-9]*\.[0-9][0-9]*\).*'`
 829     GLIB_MAJOR_VERSION="`expr $GLIB_VERSION : '\([0-9][0-9]*\).*'`"
 830     GLIB_MINOR_VERSION="`expr $GLIB_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
 831     GLIB_DOTDOT_VERSION="`expr $GLIB_VERSION : '[0-9][0-9]*\.[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
 832     if [[ $GLIB_MAJOR_VERSION -gt 2 ||
 833           $GLIB_MINOR_VERSION -gt 28 ||
 834           ($GLIB_MINOR_VERSION -eq 28 && $GLIB_DOTDOT_VERSION -ge 8) ]]
 835     then
 836         #
 837         # Starting with GLib 2.28.8, xz-compressed tarballs are available.
 838         #
 839         [ -f glib-$GLIB_VERSION.tar.xz ] || curl -L -O http://ftp.gnome.org/pub/gnome/sources/glib/$glib_dir/glib-$GLIB_VERSION.tar.xz || exit 1
 840         xzcat glib-$GLIB_VERSION.tar.xz | tar xf - || exit 1
 841     else
 842         [ -f glib-$GLIB_VERSION.tar.bz2 ] || curl -L -O http://ftp.gnome.org/pub/gnome/sources/glib/$glib_dir/glib-$GLIB_VERSION.tar.bz2 || exit 1
 843         bzcat glib-$GLIB_VERSION.tar.bz2 | tar xf - || exit 1
 844     fi
 845     cd glib-$GLIB_VERSION
 846     #
 847     # OS X ships with libffi, but doesn't provide its pkg-config file;
 848     # explicitly specify LIBFFI_CFLAGS and LIBFFI_LIBS, so the configure
 849     # script doesn't try to use pkg-config to get the appropriate
 850     # C flags and loader flags.
 851     #
 852     # And, what's worse, at least with the version of Xcode that comes
 853     # with Leopard, /usr/include/ffi/fficonfig.h doesn't define MACOSX,
 854     # which causes the build of GLib to fail.  If we don't find
 855     # "#define.*MACOSX" in /usr/include/ffi/fficonfig.h, explictly
 856     # define it.
 857     #
 858     # While we're at it, suppress -Wformat-nonliteral to avoid a case
 859     # where clang's stricter rules on when not to complain about
 860     # non-literal format arguments cause it to complain about code
 861     # that's safe but it wasn't told that.  See my comment #25 in
 862     # GNOME bug 691608:
 863     #
 864     #   https://bugzilla.gnome.org/show_bug.cgi?id=691608#c25
 865     #
 866     # First, determine where the system include files are.  (It's not
 867     # necessarily /usr/include.)  There's a bit of a greasy hack here;
 868     # pre-5.x versions of the developer tools don't support the
 869     # --show-sdk-path option, and will produce no output, so includedir
 870     # will be set to /usr/include (in those older versions of the
 871     # developer tools, there is a /usr/include directory).
 872     #
 873     includedir=`xcrun --show-sdk-path 2>/dev/null`/usr/include
 874     if grep -qs '#define.*MACOSX' $includedir/ffi/fficonfig.h
 875     then
 876         # It's defined, nothing to do
 877         LIBFFI_CFLAGS="-I $includedir/ffi" LIBFFI_LIBS="-lffi" CFLAGS="$CFLAGS -Wno-format-nonliteral $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
 878     else
 879         LIBFFI_CFLAGS="-I $includedir/ffi" LIBFFI_LIBS="-lffi" CFLAGS="$CFLAGS -DMACOSX -Wno-format-nonliteral $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
 880     fi
 881
 882     #
 883     # Apply the fix to GNOME bug 529806:
 884     #
 885     #    https://bugzilla.gnome.org/show_bug.cgi?id=529806
 886     #
 887     # if we have a version of GLib prior to 2.30.
 888     #
 889     if [[ $GLIB_MAJOR_VERSION -eq 2 && $GLIB_MINOR_VERSION -le 30 ]]
 890     then
 891         patch -p0 <../../macosx-support-lib-patches/glib-gconvert.c.patch || exit 1
 892     fi
 893     make $MAKE_BUILD_OPTS || exit 1
 894     $DO_MAKE_INSTALL || exit 1
 895     cd ..
 896     touch glib-$GLIB_VERSION-done
 897 fi
 898
 899 #
 900 # Now we have reached a point where we can build everything but
 901 # the GUI (Wireshark).
 902 #
 903 if [ "$QT_VERSION" -a ! -f qt-$QT_VERSION-done ]; then
 904     echo "Downloading, building, and installing Qt:"
 905     QT_MAJOR_VERSION="`expr $QT_VERSION : '\([0-9][0-9]*\).*'`"
 906     QT_MINOR_VERSION="`expr $QT_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
 907     QT_DOTDOT_VERSION="`expr $QT_VERSION : '[0-9][0-9]*\.[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
 908     QT_MAJOR_MINOR_VERSION=$QT_MAJOR_VERSION.$QT_MINOR_VERSION
 909     #
 910     # What you get for this URL might just be a 302 Found reply, so use
 911     # -L so we get redirected.
 912     #
 913     curl -L -O http://download.qt-project.org/official_releases/qt/$QT_MAJOR_MINOR_VERSION/$QT_VERSION/single/qt-everywhere-opensource-src-$QT_VERSION.tar.gz
 914     #
 915     # Qt 5.1.x sets QMAKE_MACOSX_DEPLOYMENT_TARGET = 10.6
 916     # in qtbase/mkspecs/$TARGET_PLATFORM/qmake.conf
 917     # We may need to adjust this manually in the future.
 918     #
 919     # The -no-c++11 flag is needed to work around
 920     # https://bugreports.qt-project.org/browse/QTBUG-30487
 921     #
 922     tar xf qt-everywhere-opensource-src-$QT_VERSION.tar.gz
 923     cd qt-everywhere-opensource-src-$QT_VERSION
 924     #
 925     # We don't build Qt in its Full Shining Glory, as we don't need all
 926     # of its components, and it takes *forever* to build in that form.
 927     #
 928     # Qt 5.2.0 beta1 fails to build on OS X without -no-xcb due to bug
 929     # QTBUG-34382.
 930     #
 931     # Qt 5.x fails to build on OS X with -no-opengl due to bug
 932     # QTBUG-31151.
 933     #
 934     ./configure -v -sdk macosx$min_osx_target -platform $TARGET_PLATFORM \
 935         -opensource -confirm-license -no-c++11 -no-dbus \
 936         -no-sql-sqlite -no-xcb -nomake examples \
 937         -skip qtdoc -skip qtquickcontrols -skip qtwebkit \
 938         -skip qtwebkit-examples -skip qtxmlpatterns
 939     make || exit 1
 940     $DO_MAKE_INSTALL || exit 1
 941     cd ..
 942     touch qt-$QT_VERSION-done
 943 fi
 944
 945 if [ "$GTK_VERSION" ]; then
 946     #
 947     # GTK+ 3 requires a newer Cairo build than the one that comes with
 948     # 10.6, so we build Cairo if we are using GTK+ 3.
 949     #
 950     # In 10.6 and 10.7, it's an X11 library; if we build with "native" GTK+
 951     # rather than X11 GTK+, we might have to build and install Cairo.
 952     # In 10.8 and later, there is no X11, but it's included in Xquartz;
 953     # again, if we build with "native" GTK+, we'd have to build and install
 954     # it.
 955     #
 956     if [[ "$GTK_MAJOR_VERSION" -eq 3 || "$cairo_not_in_the_os" = yes ]]; then
 957         #
 958         # Requirements for Cairo first
 959         #
 960         # The libpng that comes with the X11 for Leopard has a bogus
 961         # pkg-config file that lies about where the header files are,
 962         # which causes other packages not to be able to find its
 963         # headers.
 964         #
 965         # The libpng in later versions is not what the version of
 966         # libpixman we build below wants - it wants libpng15.
 967         #
 968         if [ ! -f libpng-$PNG_VERSION-done ] ; then
 969             echo "Downloading, building, and installing libpng:"
 970             #
 971             # The FTP site puts libpng x.y.* into a libpngxy directory.
 972             #
 973             subdir=`echo $PNG_VERSION | sed 's/\([1-9][0-9]*\)\.\([1-9][0-9]*\).*/libpng\1\2'/`
 974             [ -f libpng-$PNG_VERSION.tar.xz ] || curl -O ftp://ftp.simplesystems.org/pub/libpng/png/src/$subdir/libpng-$PNG_VERSION.tar.xz
 975             xzcat libpng-$PNG_VERSION.tar.xz | tar xf - || exit 1
 976             cd libpng-$PNG_VERSION
 977             CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
 978             make $MAKE_BUILD_OPTS || exit 1
 979             $DO_MAKE_INSTALL || exit 1
 980             cd ..
 981             touch libpng-$PNG_VERSION-done
 982         fi
 983
 984         #
 985         # The libpixman versions that come with the X11s for Leopard,
 986         # Snow Leopard, and Lion is too old to support Cairo's image
 987         # surface backend feature (which requires pixman-1 >= 0.22.0).
 988         #
 989         # XXX - what about the one that comes with the latest version
 990         # of Xquartz?
 991         #
 992         if [ ! -f pixman-$PIXMAN_VERSION-done ] ; then
 993             echo "Downloading, building, and installing pixman:"
 994             [ -f pixman-$PIXMAN_VERSION.tar.gz ] || curl -O http://www.cairographics.org/releases/pixman-$PIXMAN_VERSION.tar.gz
 995             gzcat pixman-$PIXMAN_VERSION.tar.gz | tar xf - || exit 1
 996             cd pixman-$PIXMAN_VERSION
 997             CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
 998             make V=1 $MAKE_BUILD_OPTS || exit 1
 999             $DO_MAKE_INSTALL || exit 1
1000             cd ..
1001             touch pixman-$PIXMAN_VERSION-done
1002         fi
1003
1004         #
1005         # And now Cairo itself.
1006         # XXX - with the libxcb that comes with 10.6,
1007         #
1008         # xcb_discard_reply() is missing, and the build fails.
1009         #
1010         if [ ! -f cairo-$CAIRO_VERSION-done ] ; then
1011             echo "Downloading, building, and installing Cairo:"
1012             CAIRO_MAJOR_VERSION="`expr $CAIRO_VERSION : '\([0-9][0-9]*\).*'`"
1013             CAIRO_MINOR_VERSION="`expr $CAIRO_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
1014             CAIRO_DOTDOT_VERSION="`expr $CAIRO_VERSION : '[0-9][0-9]*\.[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
1015             if [[ $CAIRO_MAJOR_VERSION -gt 1 ||
1016                   $CAIRO_MINOR_VERSION -gt 12 ||
1017                   ($CAIRO_MINOR_VERSION -eq 12 && $CAIRO_DOTDOT_VERSION -ge 2) ]]
1018             then
1019                 #
1020                 # Starting with Cairo 1.12.2, the tarballs are compressed with
1021                 # xz rather than gzip.
1022                 #
1023                 [ -f cairo-$CAIRO_VERSION.tar.xz ] || curl -O http://cairographics.org/releases/cairo-$CAIRO_VERSION.tar.xz || exit 1
1024                 xzcat cairo-$CAIRO_VERSION.tar.xz | tar xf - || exit 1
1025             else
1026                 [ -f cairo-$CAIRO_VERSION.tar.gz ] || curl -O http://cairographics.org/releases/cairo-$CAIRO_VERSION.tar.gz || exit 1
1027                 gzcat cairo-$CAIRO_VERSION.tar.gz | tar xf - || exit 1
1028             fi
1029             cd cairo-$CAIRO_VERSION
1030             # CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --enable-quartz=no || exit 1
1031             # Maybe follow http://cairographics.org/end_to_end_build_for_mac_os_x/
1032             CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --enable-quartz=yes || exit 1
1033             #
1034             # We must avoid the version of libpng that comes with X11; the
1035             # only way I've found to force that is to forcibly set INCLUDES
1036             # when we do the build, so that this comes before CAIRO_CFLAGS,
1037             # which has -I/usr/X11/include added to it before anything
1038             # connected to libpng is.
1039             #
1040             INCLUDES="-I/usr/local/include/libpng15" make $MAKE_BUILD_OPTS || exit 1
1041             $DO_MAKE_INSTALL || exit 1
1042             cd ..
1043             touch cairo-$CAIRO_VERSION-done
1044         fi
1045     fi
1046
1047     if [ ! -f atk-$ATK_VERSION-done ] ; then
1048         echo "Downloading, building, and installing ATK:"
1049         atk_dir=`expr $ATK_VERSION : '\([0-9][0-9]*\.[0-9][0-9]*\).*'`
1050         ATK_MAJOR_VERSION="`expr $ATK_VERSION : '\([0-9][0-9]*\).*'`"
1051         ATK_MINOR_VERSION="`expr $ATK_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
1052         ATK_DOTDOT_VERSION="`expr $ATK_VERSION : '[0-9][0-9]*\.[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
1053         if [[ $ATK_MAJOR_VERSION -gt 2 ||
1054               ($ATK_MAJOR_VERSION -eq 2 && $ATK_MINOR_VERSION -gt 0) ||
1055               ($ATK_MANOR_VERSION -eq 2 && $ATK_MINOR_VERSION -eq 0 && $ATK_DOTDOT_VERSION -ge 1) ]]
1056         then
1057             #
1058             # Starting with ATK 2.0.1, xz-compressed tarballs are available.
1059             #
1060             [ -f atk-$ATK_VERSION.tar.xz ] || curl -O http://ftp.gnome.org/pub/gnome/sources/atk/$atk_dir/atk-$ATK_VERSION.tar.xz || exit 1
1061             xzcat atk-$ATK_VERSION.tar.xz | tar xf - || exit 1
1062         else
1063             [ -f atk-$ATK_VERSION.tar.bz2 ] || curl -O http://ftp.gnome.org/pub/gnome/sources/atk/$atk_dir/atk-$ATK_VERSION.tar.bz2 || exit 1
1064             bzcat atk-$ATK_VERSION.tar.bz2 | tar xf - || exit 1
1065         fi
1066         cd atk-$ATK_VERSION
1067         CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
1068         make $MAKE_BUILD_OPTS || exit 1
1069         $DO_MAKE_INSTALL || exit 1
1070         cd ..
1071         touch atk-$ATK_VERSION-done
1072     fi
1073
1074     if [ ! -f pango-$PANGO_VERSION-done ] ; then
1075         echo "Downloading, building, and installing Pango:"
1076         pango_dir=`expr $PANGO_VERSION : '\([0-9][0-9]*\.[0-9][0-9]*\).*'`
1077         PANGO_MAJOR_VERSION="`expr $PANGO_VERSION : '\([0-9][0-9]*\).*'`"
1078         PANGO_MINOR_VERSION="`expr $PANGO_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
1079         if [[ $PANGO_MAJOR_VERSION -gt 1 ||
1080               $PANGO_MINOR_VERSION -ge 29 ]]
1081         then
1082             #
1083             # Starting with Pango 1.29, the tarballs are compressed with
1084             # xz rather than bzip2.
1085             #
1086             [ -f pango-$PANGO_VERSION.tar.xz ] || curl -L -O http://ftp.gnome.org/pub/gnome/sources/pango/$pango_dir/pango-$PANGO_VERSION.tar.xz || exit 1
1087             xzcat pango-$PANGO_VERSION.tar.xz | tar xf - || exit 1
1088         else
1089             [ -f pango-$PANGO_VERSION.tar.bz2 ] || curl -L -O http://ftp.gnome.org/pub/gnome/sources/pango/$pango_dir/pango-$PANGO_VERSION.tar.bz2 || exit 1
1090             bzcat pango-$PANGO_VERSION.tar.bz2 | tar xf - || exit 1
1091         fi
1092         cd pango-$PANGO_VERSION
1093         CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
1094         make $MAKE_BUILD_OPTS || exit 1
1095         $DO_MAKE_INSTALL || exit 1
1096         cd ..
1097         touch pango-$PANGO_VERSION-done
1098     fi
1099
1100     if [ "$GDK_PIXBUF_VERSION" -a ! -f gdk-pixbuf-$GDK_PIXBUF_VERSION-done ] ; then
1101         echo "Downloading, building, and installing gdk-pixbuf:"
1102         gdk_pixbuf_dir=`expr $GDK_PIXBUF_VERSION : '\([0-9][0-9]*\.[0-9][0-9]*\).*'`
1103         [ -f gdk-pixbuf-$GDK_PIXBUF_VERSION.tar.xz ] || curl -L -O http://ftp.gnome.org/pub/gnome/sources/gdk-pixbuf/$gdk_pixbuf_dir/gdk-pixbuf-$GDK_PIXBUF_VERSION.tar.xz || exit 1
1104         xzcat gdk-pixbuf-$GDK_PIXBUF_VERSION.tar.xz | tar xf - || exit 1
1105         cd gdk-pixbuf-$GDK_PIXBUF_VERSION
1106         #
1107         # If we're building for 10.6, use libpng12; if you have 10.7.5, including
1108         # X11, and Xcode 4.3.3, the system has libpng15, complete with pkg-config
1109         # files, as part of X11, but 10.6's X11 has only libpng12, and the 10.6
1110         # SDK in Xcode 4.3.3 also has only libpng12, and has no pkg-config files
1111         # of its own, so we have to explicitly set LIBPNG to override the
1112         # configure script, and also force the CFLAGS to look for the header
1113         # files for libpng12 (note that -isysroot doesn't affect the arguments
1114         # to -I, so we need to include the SDK path explicitly).
1115         #
1116         if [[ "$min_osx_target" = 10.6 ]]
1117         then
1118             LIBPNG="-L/usr/X11/lib -lpng12" CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS -I$SDKPATH/usr/X11/include/libpng12" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --without-libtiff --without-libjpeg || exit 1
1119         else
1120             CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --without-libtiff --without-libjpeg || exit 1
1121         fi
1122         make $MAKE_BUILD_OPTS || exit 1
1123         $DO_MAKE_INSTALL || exit 1
1124         cd ..
1125         touch gdk-pixbuf-$GDK_PIXBUF_VERSION-done
1126     fi
1127
1128     if [ ! -f gtk+-$GTK_VERSION-done ] ; then
1129         echo "Downloading, building, and installing GTK+:"
1130         gtk_dir=`expr $GTK_VERSION : '\([0-9][0-9]*\.[0-9][0-9]*\).*'`
1131         if [[ $GTK_MAJOR_VERSION -gt 2 ||
1132               $GTK_MINOR_VERSION -gt 24 ||
1133              ($GTK_MINOR_VERSION -eq 24 && $GTK_DOTDOT_VERSION -ge 5) ]]
1134         then
1135             #
1136             # Starting with GTK+ 2.24.5, the tarballs are compressed with
1137             # xz rather than gzip, in addition to bzip2; use xz, as we've
1138             # built and installed it, and as xz compresses better than
1139             # bzip2 so the tarballs take less time to download.
1140             #
1141             [ -f gtk+-$GTK_VERSION.tar.xz ] || curl -L -O http://ftp.gnome.org/pub/gnome/sources/gtk+/$gtk_dir/gtk+-$GTK_VERSION.tar.xz || exit 1
1142             xzcat gtk+-$GTK_VERSION.tar.xz | tar xf - || exit 1
1143         else
1144             [ -f gtk+-$GTK_VERSION.tar.bz2 ] || curl -L -O http://ftp.gnome.org/pub/gnome/sources/gtk+/$gtk_dir/gtk+-$GTK_VERSION.tar.bz2 || exit 1
1145             bzcat gtk+-$GTK_VERSION.tar.bz2 | tar xf - || exit 1
1146         fi
1147         cd gtk+-$GTK_VERSION
1148         if [ $DARWIN_MAJOR_VERSION -ge "12" ]
1149         then
1150             #
1151             # GTK+ 2.24.10, at least, doesn't build on Mountain Lion with the
1152             # CUPS printing backend - either the CUPS API changed incompatibly
1153             # or the backend was depending on non-API implementation details.
1154             #
1155             # Configure it out, on Mountain Lion and later, for now.
1156             # (12 is the Darwin major version number in Mountain Lion.)
1157             #
1158             # Also, configure out libtiff and libjpeg; configure scripts
1159             # just ignore unknown --enable/--disable and --with/--without
1160             # options (at least they've always do so up to now).
1161             #
1162             CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --disable-cups --without-libtiff --without-libjpeg || exit 1
1163         else
1164             CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --without-libtiff --without-libjpeg || exit 1
1165         fi
1166         make $MAKE_BUILD_OPTS || exit 1
1167         $DO_MAKE_INSTALL || exit 1
1168         cd ..
1169         touch gtk+-$GTK_VERSION-done
1170     fi
1171 fi
1172
1173 #
1174 # Now we have reached a point where we can build everything including
1175 # the GUI (Wireshark), but not with any optional features such as
1176 # SNMP OID resolution, some forms of decryption, Lua scripting, playback
1177 # of audio, or GeoIP mapping of IP addresses.
1178 #
1179 # We now conditionally download optional libraries to support them;
1180 # the default is to download them all.
1181 #
1182
1183 if [ "$LIBSMI_VERSION" -a ! -f libsmi-$LIBSMI_VERSION-done ] ; then
1184     echo "Downloading, building, and installing libsmi:"
1185     [ -f libsmi-$LIBSMI_VERSION.tar.gz ] || curl -L -O ftp://ftp.ibr.cs.tu-bs.de/pub/local/libsmi/libsmi-$LIBSMI_VERSION.tar.gz || exit 1
1186     gzcat libsmi-$LIBSMI_VERSION.tar.gz | tar xf - || exit 1
1187     cd libsmi-$LIBSMI_VERSION
1188     CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
1189     make $MAKE_BUILD_OPTS || exit 1
1190     $DO_MAKE_INSTALL || exit 1
1191     cd ..
1192     touch libsmi-$LIBSMI_VERSION-done
1193 fi
1194
1195 if [ "$LIBGPG_ERROR_VERSION" -a ! -f libgpg-error-$LIBGPG_ERROR_VERSION-done ] ; then
1196     echo "Downloading, building, and installing libgpg-error:"
1197     [ -f libgpg-error-$LIBGPG_ERROR_VERSION.tar.bz2 ] || curl -L -O ftp://ftp.gnupg.org/gcrypt/libgpg-error/libgpg-error-$LIBGPG_ERROR_VERSION.tar.bz2 || exit 1
1198     bzcat libgpg-error-$LIBGPG_ERROR_VERSION.tar.bz2 | tar xf - || exit 1
1199     cd libgpg-error-$LIBGPG_ERROR_VERSION
1200     CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
1201     make $MAKE_BUILD_OPTS || exit 1
1202     $DO_MAKE_INSTALL || exit 1
1203     cd ..
1204     touch libgpg-error-$LIBGPG_ERROR_VERSION-done
1205 fi
1206
1207 if [ "$LIBGCRYPT_VERSION" -a ! -f libgcrypt-$LIBGCRYPT_VERSION-done ] ; then
1208     #
1209     # libgpg-error is required for libgcrypt.
1210     #
1211     if [ -z $LIBGPG_ERROR_VERSION ]
1212     then
1213         echo "libgcrypt requires libgpg-error, but you didn't install libgpg-error." 1>&2
1214         exit 1
1215     fi
1216
1217     echo "Downloading, building, and installing libgcrypt:"
1218     [ -f libgcrypt-$LIBGCRYPT_VERSION.tar.gz ] || curl -L -O ftp://ftp.gnupg.org/gcrypt/libgcrypt/libgcrypt-$LIBGCRYPT_VERSION.tar.gz || exit 1
1219     gzcat libgcrypt-$LIBGCRYPT_VERSION.tar.gz | tar xf - || exit 1
1220     cd libgcrypt-$LIBGCRYPT_VERSION
1221     #
1222     # The assembler language code is not compatible with the OS X
1223     # x86 assembler (or is it an x86-64 vs. x86-32 issue?).
1224     #
1225     # libgcrypt expects gnu89, not c99/gnu99, semantics for
1226     # "inline".  See, for example:
1227     #
1228     #    http://lists.freebsd.org/pipermail/freebsd-ports-bugs/2010-October/198809.html
1229     #
1230     CFLAGS="$CFLAGS -std=gnu89 $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --disable-asm || exit 1
1231     make $MAKE_BUILD_OPTS || exit 1
1232     $DO_MAKE_INSTALL || exit 1
1233     cd ..
1234     touch libgcrypt-$LIBGCRYPT_VERSION-done
1235 fi
1236
1237 if [ "$GNUTLS_VERSION" -a ! -f gnutls-$GNUTLS_VERSION-done ] ; then
1238     #
1239     # GnuTLS requires libgcrypt (or nettle, in newer versions).
1240     #
1241     if [ -z $LIBGCRYPT_VERSION ]
1242     then
1243         echo "GnuTLS requires libgcrypt, but you didn't install libgcrypt" 1>&2
1244         exit 1
1245     fi
1246
1247     echo "Downloading, building, and installing GnuTLS:"
1248     [ -f gnutls-$GNUTLS_VERSION.tar.bz2 ] || curl -L -O http://ftp.gnu.org/gnu/gnutls/gnutls-$GNUTLS_VERSION.tar.bz2 || exit 1
1249     bzcat gnutls-$GNUTLS_VERSION.tar.bz2 | tar xf - || exit 1
1250     cd gnutls-$GNUTLS_VERSION
1251     #
1252     # Use libgcrypt, not nettle.
1253     # XXX - is there some reason to prefer nettle?  Or does
1254     # Wireshark directly use libgcrypt routines?
1255     #
1256     CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --with-libgcrypt --without-p11-kit || exit 1
1257     make $MAKE_BUILD_OPTS || exit 1
1258     #
1259     # The pkgconfig file for GnuTLS says "requires zlib", but OS X,
1260     # while it supplies zlib, doesn't supply a pkgconfig file for
1261     # it.
1262     #
1263     # Patch the GnuTLS pkgconfig file not to require zlib.
1264     # (If the capabilities of GnuTLS that Wireshark uses don't
1265     # depend on building GnuTLS with zlib, an alternative would be
1266     # to configure it not to use zlib.)
1267     #
1268     patch -p0 lib/gnutls.pc.in <../../macosx-support-lib-patches/gnutls-pkgconfig.patch || exit 1
1269     $DO_MAKE_INSTALL || exit 1
1270     cd ..
1271     touch gnutls-$GNUTLS_VERSION-done
1272 fi
1273
1274 if [ "$LUA_VERSION" -a ! -f lua-$LUA_VERSION-done ] ; then
1275     echo "Downloading, building, and installing Lua:"
1276     [ -f lua-$LUA_VERSION.tar.gz ] || curl -L -O http://www.lua.org/ftp/lua-$LUA_VERSION.tar.gz || exit 1
1277     gzcat lua-$LUA_VERSION.tar.gz | tar xf - || exit 1
1278     cd lua-$LUA_VERSION
1279     make $MAKE_BUILD_OPTS macosx || exit 1
1280     $DO_MAKE_INSTALL || exit 1
1281     cd ..
1282     touch lua-$LUA_VERSION-done
1283 fi
1284
1285 if [ "$PORTAUDIO_VERSION" -a ! -f portaudio-done ] ; then
1286     echo "Downloading, building, and installing PortAudio:"
1287     [ -f $PORTAUDIO_VERSION.tgz ] || curl -L -O http://www.portaudio.com/archives/$PORTAUDIO_VERSION.tgz || exit 1
1288     gzcat $PORTAUDIO_VERSION.tgz | tar xf - || exit 1
1289     cd portaudio
1290     #
1291     # Un-comment an include that's required on Lion.
1292     #
1293     patch -p0 include/pa_mac_core.h <../../macosx-support-lib-patches/portaudio-pa_mac_core.h.patch
1294     #
1295     # Fix a bug that showed up with clang (but is a bug with any
1296     # compiler).
1297     #
1298     patch -p0 src/hostapi/coreaudio/pa_mac_core.c <../../macosx-support-lib-patches/portaudio-pa_mac_core.c.patch
1299     #
1300     # Disable fat builds - the configure script doesn't work right
1301     # with Xcode 4 if you leave them enabled, and we don't build
1302     # any other libraries fat (GLib, for example, would be very
1303     # hard to build fat), so there's no advantage to having PortAudio
1304     # built fat.
1305     #
1306     # Set the minimum OS X version to 10.4, to suppress some
1307     # deprecation warnings.  (Good luck trying to make any of
1308     # this build on an OS+Xcode with a pre-10.4 SDK; we don't
1309     # worry about the user requesting that.)
1310     #
1311     CFLAGS="$CFLAGS -mmacosx-version-min=10.4 $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --disable-mac-universal || exit 1
1312     make $MAKE_BUILD_OPTS || exit 1
1313     $DO_MAKE_INSTALL || exit 1
1314     cd ..
1315     touch portaudio-done
1316 fi
1317
1318 if [ "$GEOIP_VERSION" -a ! -f geoip-$GEOIP_VERSION-done ]
1319 then
1320     echo "Downloading, building, and installing GeoIP API:"
1321     [ -f GeoIP-$GEOIP_VERSION.tar.gz ] || curl -L -O http://geolite.maxmind.com/download/geoip/api/c/GeoIP-$GEOIP_VERSION.tar.gz || exit 1
1322     gzcat GeoIP-$GEOIP_VERSION.tar.gz | tar xf - || exit 1
1323     cd GeoIP-$GEOIP_VERSION
1324     CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
1325     #
1326     # Grr.  Their man pages "helpfully" have an ISO 8859-1
1327     # copyright symbol in the copyright notice, but OS X's
1328     # default character encoding is UTF-8.  sed on Mountain
1329     # Lion barfs at the "illegal character sequence" represented
1330     # by an ISO 8859-1 copyright symbol, as it's not a valid
1331     # UTF-8 sequence.
1332     #
1333     # iconv the relevant man pages into UTF-8.
1334     #
1335     for i in geoipupdate.1.in geoiplookup6.1.in geoiplookup.1.in
1336     do
1337         iconv -f iso8859-1 -t utf-8 man/"$i" >man/"$i".tmp &&
1338             mv man/"$i".tmp man/"$i"
1339     done
1340     make $MAKE_BUILD_OPTS || exit 1
1341     $DO_MAKE_INSTALL || exit 1
1342     cd ..
1343     touch geoip-$GEOIP_VERSION-done
1344 fi
1345
1346 if [ "$CARES_VERSION" -a ! -f geoip-$CARES_VERSION-done ]
1347 then
1348     echo "Downloading, building, and installing C-Ares API:"
1349     [ -f c-ares-$CARES_VERSION.tar.gz ] || curl -L -O http://c-ares.haxx.se/download/c-ares-$CARES_VERSION.tar.gz || exit 1
1350     gzcat c-ares-$CARES_VERSION.tar.gz | tar xf - || exit 1
1351     cd c-ares-$CARES_VERSION
1352     CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
1353     make $MAKE_BUILD_OPTS || exit 1
1354     $DO_MAKE_INSTALL || exit 1
1355     cd ..
1356     touch geoip-$CARES_VERSION-done
1357 fi
1358
1359 echo ""
1360
1361 echo "You are now prepared to build Wireshark. To do so do:"
1362 echo "export PKG_CONFIG_PATH=/usr/local/lib/pkgconfig:/usr/X11/lib/pkgconfig"
1363 echo ""
1364 if [ -n "$CMAKE" ]; then
1365     echo "mkdir build; cd build"
1366     echo "cmake .."
1367     echo
1368     echo "or"
1369     echo
1370 fi
1371 echo "./autogen.sh"
1372 echo "mkdir build; cd build"
1373 echo "../configure"
1374 echo ""
1375 echo "make $MAKE_BUILD_OPTS"
1376 echo "make install"
1377
1378 echo ""
1379
1380 echo "Make sure you are allowed capture access to the network devices"
1381 echo "See: http://wiki.wireshark.org/CaptureSetup/CapturePrivileges"
1382
1383 echo ""
1384
1385 exit 0